ENB Certificate - EC Type Examination - HSL€¦ · examined using Module B of the system for...

GB Explosives Notified Body, Health & Safety Laboratory, Harpur Hill, Buxton, Derbyshire, SK17 9JN, United Kingdom Tel: +44 (0)1298 218150 Fax: +44 (0)1298 218180 Email: [email protected] www.hsl.gov.uk

EC TYPE EXAMINATION CERTIFICATE

NOTIFIED BODY NO: 0519 CERTIFICATE NO: ENB/B/127/12 Issue 6 1. Product Type: High (Blasting) Explosive. 2. Product Name: SHAPED CHARGES as listed in Annex 1 to this certificate. 3. Manufacturer's Name and Address: GEODynamics, Inc., USA. 4. Applicant's Name and Address: GEODynamics, Inc., USA. 5. Attachments to this Certificate: Annex 1: products covered by this certificate. Being a notified body in accordance with the GB Statutory Instrument No 2714 (1993) and Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses, the Explosives Notified Body certifies that the above type of product has been examined using Module B of the system for attesting conformity and has been found to conform with the manufacturer's specifications for the type and with the relevant requirements of the Statutory Instrument and the Directive. Mr S Myatt Director, GB Explosives Notified Body 17 May 2012

ENB09 - Issue 5 - 17/12/99 of 8

ANNEX 1 TO EC TYPE EXAMINATION CERTIFICATE ENB/B/127/12 Issue 6 A Product Name Shaped Charges as referenced in table. B Product Description General Identification Description and explosive mass: see table General conditions

Shelf life: 10 years

Temperature limits for use: 1 hour 100 hour

RDX 325 °F 240 °F HMX 400 °F 300 °F HNS 525 °F 450 °F

Limit temperatures for storage:

-30 °C/ +60 °C/ 90 % RH max C Particular Conditions for Use As specified by GEODynamics Inc, shaped charges for use in oil well industry

ENB09 - Issue 5 - 17/12/99 of 8

PART NUMBER DESCRIPTION Explosive Mass (g)

Open-Face Shaped Charges - HMX EC1-15A0322 2520-0320-004 Charge, 1 9/16” GEOcmt HMX XDP 3.2 EC1-15A0322-RC Charge, 1 9/16”, GEO ConneX HMX XDP 3.2 EC1-17A0522 Charge, 1 3/4”, GEOcmt HMX XDP 5.1 EC1-17A0522-RC Charge, 1 3/4”, GEO ConneX HMX XDP 5.1 EC1-17A0542 2520-0611-004 Charge, ETGS, 6.0 Gram HMX 6.0 EC1-20A0722 2520-0721-004 Charge, ETGS 2” GEOcmt HMX XDP 6.8 EC1-20A0722-RC 2520-0721-004 Charge, ETGS 2” GEOcmt HMX XDP 6.8 EC1-20A0742 2520-0720-004 Charge, ETGS, 2” 7.0 Gram HMX DP 7.0 EC2-20A0722-RH 2520-0721-004, Charge, 6.8 Gram, HMX, CONNEX HP 6.8 EC2-20A0742 2520-0720-004 Charge, ETGS, 2", 7.0 Gram HMX DP 7.0 EC2-20A0722-RC Charge, 2” GEO ConneX HMX XDP 6.8 EC2-20B0722 Charge, 2” GEOcmt HMX XDP 6.5 EC2-20B0722-RC Charge, 2” GEO ConneX HMX XDP 6.5

EC2-20B0722-RH 2520-0721-004, Charge, Steel Case-6.8 Gram, HMX, CONNEX HP

6.5

EC1-25A1122 Charge, 2 ½” GEOcmt HMX XDP 11.0 EC1-25A1122-RC Charge, 2 ½” GEO ConneX HMX XDP 11.0 EC1-25A1122-RH 2520-1121-004, Charge, 11.0 Gram, HMS CONNEX HP 11.0 EC2-27A1521 2020-1520-003, Charge 15.0 Gram, RDX, SDP 15.0 EC2-27A1522 2020-1520-004 2 3/4” GEOcmt 15 Gram HMX XDP 15.0 EC2-27A1522-RC Charge, 2 3/4” GEO ConneX HMX XDP 15.0

EC2-27A1522-RH 2020-1520-004 Charge, ECGS, 15 Gram, HMX DP ConneX HP

15.0

EC2-27A1542-RC 2020-1520-004, Charge, ECGS, 15 Gram, HMX ConneX HEX

15.0

EC2-27A1542-RH 2020-1520-005, Charge, 15.0 Gram, HMX ConneX HP 15.0 EC2-31B1232 Charge, 3 1/8” GEOcmt HMX SBH 12.0 EC2-33A1912 Charge, 3 1/8” GEOcmt HMX DP 19.0 EC2-33A1912-RC Charge, 3 1/8” GEO ConneX HMX DP 19.0 EC2-33A1922 19.0 Gram, HMX, SDP 19.0 EC2-33A1922-RC 19.0 Gram, HMX, ConneX XEH 19.0 EC2-33A1942 2020-1911-004 Charge, ECGS, 19.0 Gram, HMX GH 19.0 EC2-33A1942-RC 19.0 Gram, HMX ConneX XEH 19.0 EC2-33A2312 2020-2320-004, Charge 22.7 Gram HMX XDP 22.7 EC2-33A2322 Charge, 3 3/8” GEOcmt HMX XDP 22.7 EC2-33A2322-RC Charge, 3 3/8” GEO ConneX HMX XDP 22.7

EC2-33A2322-RH 2020-2321-004, Charge, ECGS, 22.7 Gram, HMX SDP ConneX HP

22.7

ENB09 - Issue 5 - 17/12/99 of 8

EC2-33A2332 2020-2311-004 Charge, ECGS 22.7 Gram, HMX BH 22.7 EC2-33A2341-HO 2020-2310-003-HO, Charge ECGS 23.0 GRM HMX

Heavy Oil DP 22.7

EC2-33A2342 2020-2310-004 Charge 22.7 Gram HMX GH 22.7 EC2-33A2342-RC Charge 3 3/8” GEO ConneX HMX GH 22.7

EC2-33A2342-RH 2020-2311-004, Charge, ECGS, 22.7 Gram, HMX GH ConneX HP

22.7

EC2-33A2342-RCDS

2020-2310-004, Charge, ECGS, 23 Gram, HMX GH ConneX DS

23.0

EC2-33B1922 Charge, 3 1/8” GEOcmt HMX XDP 19.0 EC2-33B1922-RC Charge, 3 1/8” GEO ConneX HMX XDP 19.0 EC2-33B1942 Charge, 3 1/8” GEOcmt HMX GH 19.0 EC2-33B1942-RC Charge, 3 1/8” GEO Connex HMX GH 19.0 EC2-33B2322 2020-2321-004 Charge, ECGS 23.0 GRM HMX SDP 23.0 EC2-33B2322-RC Charge, 3 1/8” GEO ConneX HMX XDP 23.0 EC2-33B2522 2020-2521-004 Charge, ECGS 25.0 GRM HMX SDP 25.0 EC2-33B2522-RC Charge, 3 3/8” GEO Connex HMX XDP 25.0 EC2-33B2542 Charge, 3 3/8” GEOcmt HMX GH 25.0 EC2-33B2542-RC Charge, 3 3/8” GEO ConneX HMX GH 25.0 EC2-33C1432 Charge, 3 3/8” GEOcmt HMX SBH 14.0 EC2-40A3312 Charge, 4” GEOcmt HMX DP 33.0 EC2-40A3312-RC Charge, 4” GEO ConneX HMX DP 33.0 EC2-40A3922 2020-3921-004 Charge, 39 Gram HMX SDP 39.0 EC2-40A3922-RC Charge, 4” GEO ConneX HMX XDP 39.0

EC2-40A3922-RH 2020-3921-004, Charge, ECGS, 39.0 Gram, HMX SDP ConneX HP

39.0

EC2-40A3942-RH 2020-3921-004, Charge, 39.0 Gram, HMX, ConneX HP 39.0 EC2-40A3951 2020-3921-004-SJ Charge, ECGS 39.0 GRM HMX SJ 39.0 EC2-40A3952 2020-3921-004-SJ Charge, ECGS 39.0 GRM HMX SJ 39.0 EC2-40A3952-RC Charge, 4” GEO ConneX HMX SJ 39.0 EC5-40A4522 Charge, 45.0 Gram, HMX 45.0 EC2-45A2832 Charge, 4 1/2” GEOcmt HMX SBH LD 28.0 EC2-45B2632 Charge, 4 1/2” GEOcmt HMX SBH 26.0

EC2-45C2032 2020-2011-004, Charge, 4 1/2" 20.0 Gram, HMX SBH Zinc

20.0

EC2-46A2632 2020-3211-004, Charge, 4 5/8" 26.0 Gram, HMX BH Zinc

26.0

EC2-51B3232 Charge, 5 1/8” GEOcmt HMX SBH LD 32.0 EC2-70A3922 2020-3920-004 Charge, 39.0 Gram, HMX SDP 39.0

EC2-70A3922-RC 2020-3920-005. Charge, 39.0 Gram, HMX, ConneX XEH 39.0 EC2-70A3932 Charge, 7” GEOcmt SBH LD, HMX 39.0

ENB09 - Issue 5 - 17/12/99 of 8

EC2-70B3942 Charge, 7” GEOcmt HMX GH 39.0 EC2-70B3942-RC Charge, 7” GEO ConneX HMX GH 39.0 EC2-70C3932 Charge, 7” GEOcmt HMX SBH LD 39.0 EC4-17A1422 Charge, 1 11/16” HMX Diablo 13.6 EC4-17A1422-RC Charge, 1 11/16” ConneX HMX Diablo 13.6 EC4-17R1422 Charge, 1 11/16” HMX Dracula 13.6 EC4-21A1622 Charge, 2 1/8” HMX Diablo 15.5 EC4-21A1622-RC Charge, 2 1/8” HMX ConneX Diablo 15.5 EC4-21R1622 Charge, 2 1/8” HMX Dracula 15.5 EC5-26M0532-BH 2520-0611-004 Charge, 6 Gram HMX BH EXCAPE II

Cluster 6.0

EC5-26M0612-DP 2520-0720-004 Charge, 7 Gram HMX DP EXCAPE II Cluster

7.0

EC5-26M0612-RC Charge 2 5/8” GEO ConneX HMX DP 7.0

ENB09 - Issue 5 - 17/12/99 of 8


Open-Face Shaped Charges - RDX EC1-15A0321 Charge, 1 9/16”, GEOcmt RDX XDP 3.2 EC1-17A0521 Charge, 1 3/4”, GEOcmt RDX XDP 5.1 EC1-20A0721 Charge, 2” GEOcmt RDX XDP 6.8 EC2-27A1511 2020-1520-003 2 3/4” GEOcmt 15 Gram RDX XDP 15.0 EC2-27A1521 2020-1520-003, Charge, 15 Gram, RDX, SDP 15.0 EC2-31B1231 Charge, 3 1/8” GEOcmt RDX SBH 12.0 EC2-33A0941 5020-0921-003 Charge, SDC-A, 9.0 GRM RDX SDP 9.0 EC2-33A1911 3020-1920-003 Charge, ECGS, 19.0 GRM RDX DP 19.0 EC2-33A1921 3020-1920-003 Charge, ECGS, 19.0 Gram, RDX SDP 19.0

EC2-33A1941 2020-1911-003-GH Charge, ECGS, 19.0 Gram, RDX GH

19.0

EC2-33A2311 2020-2320-003 Charge, ECGS 23.0 GRM RDX DP 22.7 EC2-33A2321 Charge, 3 3/8” GEOcmt RDX XDP 22.7 EC2-33A2331 2020-2311-003 Charge, ECGS 22.7 Gram, RDX BH 22.7 EC2-33A2341 2020-2310-003 Charge, ECGS 23.0 GRM RDX GH 23.0 EC2-33A2341-C 2020-2310-003 Charge, ECGS 23.0 GM RDX GH 23.0 EC2-33B1921 Charge, 3 1/8” GEOcmt RDX XDP 19.0 EC2-33B1941 Charge, 3 1/8” GEOcmt RDX GH 19.0 EC2-33B2521 2020-2521-003 3 3/8” GEOcmt 25 Gram RDX XDP 25.0 EC2-33B2541 2020-2521-003-GH Charge, ECGS 25.0 GRM RDX GH 25.0 EC2-33C1431 Charge, 3 3/8” GEOcmt RDX SBH 14.0 EC2-40A3311 2020-3220-003 Charge, 33 gram RDX DP 33.0 EC2-40A3921 2020-3921-003 Charge, 39 gm RDX SDP 39.0 EC2-45A2831 2020-3211-003-46SBH Charge, 4 1/2”, 28.0 Gram RDX

SBH Zinc 28.0

EC2-45B2631 2020-2620-003 Charge, 4 1/2”, 26 Gram RDX SBH Steel 26.0 EC2-45B2631-2 2020-2620-003 Charge, 4 1/2”, 26 Gram RDX SBH Steel 26.0 EC2-45B2831 2020-3211-003-46SBH-28GM Charge, 4 1/2” 28 gm

RDX BH Steel 28.0

EC2-46A2631 2020-3211-003-46SBH-26GM Charge, 4 5/8” 26 gm BH Zinc

26.0

EC2-46B2833 2020-3211-003-46SBH, Charge, ECGS 32 Gram, RDX BH

32.0

EC2-51A3231 2020-3211-003 Charge, 5 1/8” 32.0 Gram RDX BOH Zinc

32.0

EC2-51A3231-C 2020-2011-003, Charge, 5 1/8" 30.0 Gram, RDX BOH Zinc-C

30.0

EC2-51A3232 Charge, 5 1/8” GEOcmt RDX SBH LD 32.0 EC2-51B3231 2020-3211-003-S Charge, 5 1/8” SBH Steel 32.0

ENB09 - Issue 5 - 17/12/99 of 8

EC2-70A3231 2020-3921-003-Z Charge, ECGS 39.0 Gram, RDX BH Zinc

39.0

EC2-70A3921 2020-3920-003 Charge, 39.0 Gram, RDX SDP 39.0 EC2-70A3931 Charge, 7” GEOcmt SBH LD, RDX 39.0 EC2-70B3941 Charge, 7” GEOcmt RDX GH 39.0 EC2-70C3931 Charge, 7” GEOcmt RDX SBH LD 39.0 EC2-70C5231 Charge, 52 Gram, RDX 52.0 EC3-31A1441 2020-1511-003 Charge, RGS-WW 14 Gram GEO SGGS

RDX BH 14.0

EC3-31A1541 3020-1511-003 Charge, RGS-WW 15 Gram RDX BH 15.0 EC3-31A1611 3020-1620-003 Charge, RGS-WW 16.0 Gram RDX DP 16.0 EC3-31A1641 2020-1521-003 Charge, ECGS 15.0 Gram RDX DP; also

known as Charge, 3 1/8” GEOcmt RDX GH 16.0

EC3-40A1611 Charge, RCGS 16.0 GRM RDX DP 16.0 EC4-17A1421 Charge, 1 11/16” RDX Diablo 13.6 EC4-17R1421 Charge, 1 11/16” RDX Dracula 13.6 EC4-21A1621 Charge, 2 1/8” RDX Diablo 15.5 EC4-21R1621 Charge, 2 1/8” RDX Dracula 15.5

ENB09 - Issue 5 - 17/12/99 of 8

ENB09 - Issue 5 - 17/12/99 of 8


Open-Face Shaped Charges - HNS EC1-17A0523 Charge, 1 3/4”, GEOcmt HNS XDP 5.1 EC1-20A0723 Charge, 2” GEOcmt HNS XDP 6.8 EC1-20A0723-RC Charge, 2” GEO ConneX HNS XDP 6.8 EC2-20A0723-RC Charge, 2” GEO ConneX HNS XDP 6.8 EC2-20A0723-RH 2520-0721-005, Charge, 6.8 Gram, HNS, CONNEX HP 6.8 EC2-20B0723 Charge, 2” GEOcmt HNS XDP 6.5 EC2-20B0723-RC Charge, 2” GEO ConneX HNS XDP 6.5

EC2-20B0723-RH 2520-0721-005, Charge, Steel Case-6.8 Gram, HNS, CONNEX HP

6.5

EC1-25A1123 Charge, 2 1/2” GEOcmt HNS XDP 11.0 EC1-25A1123-RC Charge, 2 1/2” GEO ConneX HNS XDP 11.0 EC1-25A1123-RH 2520-1121-005, Charge, 11.0 Gram, HNS CONNEX HP 11.0 EC2-27A1523 Charge, 2 3/4” GEOcmt HNS XDP 15.0 EC2-27A1523-RC Charge, 2 3/4” GEO ConneX HNS XDP 15.0 EC2-27A1523-RH 2020-1520-005, Charge,15.0 Gram, HNS ConneX HP 15.0 EC2-27A1543 2020-1520-005, Charge, ECGS, 15.0 Gram, HNS GH 15.0

EC2-27A1543-RH 2020-1520-005 Charge, ECGS, 15.0 Gram, ECGS, ConneX HP

15.0

EC2-27A1543-RC 2020-1520-005, Charge, ECGS,15.0 Gram, HNS ConneX XEH

15.0

EC2-33A2323 Charge, 3 3/8” GEOcmt HNS XDP 22.7 EC2-33A2323-RC Charge, 3 3/8” GEO ConneX HNS XDP 22.7 EC2-33A2323-RH 2020-2321-005 Charge, 23.0 Gram, HNS ConneX HP 22.7 EC2-33A2333 2020-2311-005, ECGS, 22.7 Gram, HNS BH 22.7 EC2-33A2343-RH 2020-2310-005, Charge, 23.0 Gram, HNS ConneX HP 22.7 EC2-33B2523 Charge, 3 3/8” GEOcmt HNS XDP 25.0 EC2-33B2523-RC Charge, 3 3/8” GEO ConneX HNS XDP 25.0 EC2-40A3923 Charge, 4” GEOcmt HNS XDP 39.0 EC2-40A3923-RC Charge, 4” GEO ConneX HNS XDP 39.0 EC2-40A3923-RH 2020-3921-005, Charge, 39.0 Gram, HNS, ConneX HP 39.0 EC2-40A3943-RH 2020-3921-003, Charge, 39.0 Gram, HNS, ConneX HP 39.0

ENB09 – Issue 5 – 17/12/99 Page 1 of 3

GB Explosives Notified Body, Health & Safety Laboratory, Harpur Hill, Buxton, Derbyshire, SK17 9JN, United Kingdom

Tel: +44 (0)1298 218150 Fax: +44 (0)1298 218180 Email: [email protected] www.hsl.gov.uk


NOTIFIED BODY NO: 0519 CERTIFICATE NO: ENB/B/149/13 Issue 6 1. Product Type: High (Blasting) Explosive. 2. Product Name: HMX JET PERFORATING GUN ASSEMBLIES as listed

in Annex 1 to this certificate. 3. Manufacturer's Name and Address: GeoKey Ltd, Aberdeen, DD9 7XR. 4. Applicant's Name and Address: GeoKey Ltd, Inverurie, AB51 5NQ. 5. Attachments to this Certificate: Annex 1: products covered by this certificate. Being a notified body in accordance with the GB Statutory Instrument No 2714 (1993) and Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses, the Explosives Notified Body certifies that the above type of product has been examined using Module B of the system for attesting conformity and has been found to conform with the manufacturer's specifications for the type and with the relevant requirements of the Statutory Instrument and the Directive. Dr SG Myatt Director, GB Explosives Notified Body 19 June 2013

ENB09 – Issue 5 – 17/12/99 Page 2 of 3

ANNEX 1 TO EC TYPE EXAMINATION CERTIFICATE ENB/B/149/13 Issue 6 1.563” OD, 0-6 SPF HMX Expendable Hollow Carrier Gun 1.750” OD, 0-6 SPF HMX Expendable Hollow Carrier Gun 2.000” OD, 0-6 SPF HMX Expendable Hollow Carrier Gun 2.500” OD, 0-6 SPF HMX Expendable Hollow Carrier Gun 2.625” OD, 0-15 SPF HMX Expendable Hollow Carrier Gun 2.750” OD, 0-6 SPF HMX Expendable Hollow Carrier Gun 2.875” OD, 0-6 SPF HMX Expendable Hollow Carrier Gun 3.125” OD, 0-6 SPF HMX Expendable Hollow Carrier Gun 3.125” OD, 0-12 SPF HMX Expendable Hollow Carrier Gun 3.375” OD, 0-6 SPF HMX Expendable Hollow Carrier Gun 3.375” OD, 0-12 SPF HMX Expendable Hollow Carrier Gun 4.000” OD, 0-6 SPF HMX Expendable Hollow Carrier Gun 4.500” OD, 0-6 SPF HMX Expendable Hollow Carrier Gun 4.500” OD, 0-12 SPF HMX Expendable Hollow Carrier Gun 4.625” OD, 0-6 SPF HMX Expendable Hollow Carrier Gun 4.625” OD, 0-16 SPF HMX Expendable Hollow Carrier Gun 7.000” OD, 0-12 SPF HMX Expendable Hollow Carrier Gun made up from detonating cords, boosters and shaped charges that have been CE-Marked by the GB Explosives Notified Body, UK or INERIS, France or BAM, Germany and are listed on the EC Type Examination Certificates identified below. Detonating Cords Certificate No. ENB/C/021 issued by GB Explosives Notified Body (UK). Certificate No. ENB/C/024 issued by GB Explosives Notified Body (UK). Certificate No. 0080.EXP.98.0017 issued by INERIS (France). Certificate No. 0080.EXP.98.0019 issued by INERIS (France). Certificate No. 0080.EXP.98.0020 issued by INERIS (France). Certificate No. 0080.EXP.04.0001 issued by INERIS (France). Certificate No. 0080.EXP.05.0014 issued by INERIS (France). Certificate No. 0589.EXP.1253/01 issued by BAM (Germany). Certificate No. PVTT 177/08 issued by Finnish Defence Forces Technical Research Centre. Certificate No. PVTT 178/08 issued by Finnish Defence Forces Technical Research Centre. Certificate No. PVTT 179/08 issued by Finnish Defence Forces Technical Research Centre. Certificate No. PVTT 180/08 issued by Finnish Defence Forces Technical Research Centre.

ENB09 – Issue 5 – 17/12/99 Page 3 of 3

Boosters Certificate No. 0080.EXP.98.0025 issued by INERIS (France). Certificate No. 0080.EXP.98.0026 issued by INERIS (France). Certificate No. 0080.EXP.98.0027 issued by INERIS (France). Certificate No. 0080.EXP.01.0011 issued by INERIS (France). Shaped Charges Certificate No. ENB/B/036 issued by GB Explosives Notified Body (UK). Certificate No. ENB/B/127 issued by GB Explosives Notified Body (UK). Certificate No. 0080.EXP.02.0041.C1 issued by INERIS (France). Certificate No. 0080.EXP.03.0081 issued by INERIS (France). Certificate No. 0080.EXP.03.0083 issued by INERIS (France). Certificate No. 0080.EXP.05.0016 issued by INERIS (France). Certificate No. 0080.EXP.05.0022 issued by INERIS (France). Certificate No. 0080.EXP.05.0046 issued by INERIS (France). Certificate No. 0080.EXP.05.0047 issued by INERIS (France) Certificate No. 0080.EXP.05.0051 issued by INERIS (France)

ENB09 – Issue 5 – 17/12/99 Page 1 of 2




NOTIFIED BODY NO: 0519 CERTIFICATE NO: ENB/B/150/12 Issue 2 1. Product Type: High (Blasting) Explosive. 2. Product Name: HNS JET PERFORATING GUN ASSEMBLIES as listed

in Annex 1 to this certificate. 3. Manufacturer's Name and Address: GeoKey Ltd. 4. Applicant's Name and Address: GeoKey Ltd. 5. Attachments to this Certificate: Annex 1: products covered by this certificate. Being a notified body in accordance with the GB Statutory Instrument No 2714 (1993) and Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses, the Explosives Notified Body certifies that the above type of product has been examined using Module B of the system for attesting conformity and has been found to conform with the manufacturer's specifications for the type and with the relevant requirements of the Statutory Instrument and the Directive. Dr SG Myatt Director, GB Explosives Notified Body 19 September 2012

ENB09 – Issue 5 – 17/12/99 Page 2 of 2

ANNEX 1 TO EC TYPE EXAMINATION CERTIFICATE ENB/B/150/12 Issue 2 2.500” OD, 0-6 SPF HNS Expendable Hollow Carrier Gun 3.375” OD, 0-6 SPF HNS Expendable Hollow Carrier Gun 4.500” OD, 0-6 SPF HNS Expendable Hollow Carrier Gun 4.625” OD, 0-6 SPF HNS Expendable Hollow Carrier Gun made up from detonating cords, boosters and shaped charges that have been CE-Marked by the GB Explosives Notified Body, UK or INERIS, France or BAM, Germany and are listed on the EC Type Examination Certificates identified below. Detonating Cords Certificate No. 0080.EXP.97.0022 issued by INERIS (France). Certificate No. 0589.EXP.1251/01 issued by BAM (Germany). Boosters Certificate No. 0080.EXP.98.0028 issued by INERIS (France). Certificate No. 0080.EXP.01.0011.C3 issued by INERIS (France). Shaped Charges Certificate No. ENB/B/040 issued by GB Explosives Notified Body (UK). Certificate No. 0080.EXP.05.0016 issued by INERIS (France). Certificate No. 0080.EXP.05.0022 issued by INERIS (France).

ENB09 – Issue 5 – 17/12/99 Page 1 of 3




NOTIFIED BODY NO: 0519 CERTIFICATE NO: ENB/B/146/13 Issue 5 1. Product Type: High (Blasting) Explosive. 2. Product Name: RDX JET PERFORATING GUN ASSEMBLIES as listed

in Annex 1 to this certificate. 3. Manufacturer's Name and Address: GeoKey Ltd, Inverurie, AB51 5NQ. 4. Applicant's Name and Address: GeoKey Ltd, Aberdeen, DD9 7XR. 5. Attachments to this Certificate: Annex 1: products covered by this certificate. Being a notified body in accordance with the GB Statutory Instrument No 2714 (1993) and Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses, the Explosives Notified Body certifies that the above type of product has been examined using Module B of the system for attesting conformity and has been found to conform with the manufacturer's specifications for the type and with the relevant requirements of the Statutory Instrument and the Directive. Dr SG Myatt Director, GB Explosives Notified Body 19 June 2013

ENB09 – Issue 5 – 17/12/99 Page 2 of 3

ANNEX 1 TO EC TYPE EXAMINATION CERTIFICATE ENB/B/146/13 Issue 5 2.750” OD, 0-6 SPF RDX Expendable Hollow Carrier Gun 3.125” OD, 0-6 SPF RDX Expendable Hollow Carrier Gun 3.125” OD, 0-12 SPF RDX Expendable Hollow Carrier Gun 3.375” OD, 0-6 SPF RDX Expendable Hollow Carrier Gun 4.000” OD, 0-6 SPF RDX Expendable Hollow Carrier Gun 4.500” OD, 0-6 SPF RDX Expendable Hollow Carrier Gun 4.500” OD, 0-12 SPF RDX Expendable Hollow Carrier Gun 4.625” OD, 0-16 SPF RDX Expendable Hollow Carrier Gun 5.125” OD, 0-16 SPF RDX Expendable Hollow Carrier Gun 7.000” OD, 0-12 SPF RDX Expendable Hollow Carrier Gun made up from detonating cords, boosters and shaped charges that have been CE-Marked by the GB Explosives Notified Body, UK or INERIS, France and are listed on the EC Type Examination Certificates identified below. Detonating Cords Certificate No. ENB/C/021 issued by GB Explosives Notified Body (UK). Certificate No. ENB/C/024 issued by GB Explosives Notified Body (UK). Certificate No. 0080.EXP.97.0023 issued by INERIS (France). Certificate No. 0080.EXP.98.0018 issued by INERIS (France). Certificate No. PVTT 172/08 issued by Finnish Defence Forces Technical Research Centre. Certificate No. PVTT 173/08 issued by Finnish Defence Forces Technical Research Centre. Certificate No. PVTT 174/08 issued by Finnish Defence Forces Technical Research Centre. Certificate No. PVTT 175/08 issued by Finnish Defence Forces Technical Research Centre. Certificate No. PVTT 176/08 issued by Finnish Defence Forces Technical Research Centre. Certificate No. PVTT 177/08 issued by Finnish Defence Forces Technical Research Centre. Certificate No. PVTT 178/08 issued by Finnish Defence Forces Technical Research Centre. Certificate No. PVTT 179/08 issued by Finnish Defence Forces Technical Research Centre. Certificate No. PVTT 180/08 issued by Finnish Defence Forces Technical Research Centre.

ENB09 – Issue 5 – 17/12/99 Page 3 of 3

Boosters Certificate No. 0080.EXP.98.0025 issued by INERIS (France). Certificate No. 0080.EXP.98.0026 issued by INERIS (France). Certificate No. 0080.EXP.98.0027 issued by INERIS (France). Certificate No. 0080.EXP.01.0011 issued by INERIS (France). Shaped Charges Certificate No. ENB/B/127 issued by GB Explosives Notified Body (UK). Certificate No. 0080.EXP.03.0082 issued by INERIS (France). Certificate No. 0080.EXP.05.0048 issued by INERIS (France).



NOTIFIED BODY NO: 0519 CERTIFICATE NO: ENB/B/149/009 Issue 4 1. Product Type: High (Blasting) Explosive. 2. Product Name: HMX JET PERFORATING GUN ASSEMBLIES as listed in

Annex 1 to this certificate. 3. Manufacturer's Name: GeoKey Ltd, UK. 4. Applicant's Name: GeoKey Ltd, UK. 5. Attachments to this Certificate: Annex 1: products covered by this certificate. Being a notified body in accordance with the GB Statutory Instrument No 2714 (1993) and Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses, the Explosives Notified Body certifies that the above type of product has been examined using Module B of the system for attesting conformity and has been found to conform with the manufacturer's specifications for the type and with the relevant requirements of the Statutory Instrument and the Directive. Dr R K Wharton Director, GB Explosives Notified Body 20 February 2009

ENB09 – Issue 5 – 17/12/99 Page 1 of 3

ANNEX 1 TO EC TYPE EXAMINATION CERTIFICATE ENB/B/149/009 Issue 4 1.563” OD, 0-6 SPF HMX Expendable Hollow Carrier Gun 1.750” OD, 0-6 SPF HMX Expendable Hollow Carrier Gun 2.000” OD, 0-6 SPF HMX Expendable Hollow Carrier Gun 2.500” OD, 0-6 SPF HMX Expendable Hollow Carrier Gun 2.625” OD, 0-15 SPF HMX Expendable Hollow Carrier Gun 2.750” OD, 0-6 SPF HMX Expendable Hollow Carrier Gun 2.875” OD, 0-6 SPF HMX Expendable Hollow Carrier Gun 3.125” OD, 0-6 SPF HMX Expendable Hollow Carrier Gun 3.125” OD, 0-12 SPF HMX Expendable Hollow Carrier Gun 3.375” OD, 0-6 SPF HMX Expendable Hollow Carrier Gun 3.375” OD, 0-12 SPF HMX Expendable Hollow Carrier Gun 4.000” OD, 0-6 SPF HMX Expendable Hollow Carrier Gun 4.500” OD, 0-6 SPF HMX Expendable Hollow Carrier Gun 4.500” OD, 0-12 SPF HMX Expendable Hollow Carrier Gun 4.625” OD, 0-6 SPF HMX Expendable Hollow Carrier Gun 4.625” OD, 0-16 SPF HMX Expendable Hollow Carrier Gun 7.000” OD, 0-12 SPF HMX Expendable Hollow Carrier Gun made up from detonating cords, boosters and shaped charges that have been CE-Marked by the GB Explosives Notified Body, UK or INERIS, France or BAM, Germany and are listed on the EC Type Examination Certificates identified below. Detonating Cords Certificate No. ENB/C/021 issued by GB Explosives Notified Body (UK). Certificate No. ENB/C/024 issued by GB Explosives Notified Body (UK). Certificate No. 0080.EXP.98.0017 issued by INERIS (France). Certificate No. 0080.EXP.98.0019 issued by INERIS (France). Certificate No. 0080.EXP.98.0020 issued by INERIS (France). Certificate No. 0080.EXP.04.0001 issued by INERIS (France). Certificate No. 0080.EXP.05.0014 issued by INERIS (France). Certificate No. 0589.EXP.1253/01 issued by BAM (Germany). Boosters Certificate No. 0080.EXP.98.0025 issued by INERIS (France). Certificate No. 0080.EXP.98.0026 issued by INERIS (France). Certificate No. 0080.EXP.98.0027 issued by INERIS (France). Certificate No. 0080.EXP.01.0011 issued by INERIS (France). Shaped Charges Certificate No. ENB/B/036 issued by GB Explosives Notified Body (UK). Certificate No. ENB/B/127 issued by GB Explosives Notified Body (UK).

ENB09 – Issue 5 – 17/12/99 Page 2 of 3

Certificate No. 0080.EXP.02.0041.C1 issued by INERIS (France). Certificate No. 0080.EXP.03.0081 issued by INERIS (France). Certificate No. 0080.EXP.03.0083 issued by INERIS (France). Certificate No. 0080.EXP.05.0016 issued by INERIS (France). Certificate No. 0080.EXP.05.0022 issued by INERIS (France). Certificate No. 0080.EXP.05.0046 issued by INERIS (France). Certificate No. 0080.EXP.05.0047 issued by INERIS (France). Certificate No. 0080.EXP.05.0051 issued by INERIS (France).

ENB09 – Issue 5 – 17/12/99 Page 3 of 3



NOTIFIED BODY NO: 0519 CERTIFICATE NO: ENB/B/150/008 Issue 1 1. Product Type: High (Blasting) Explosive. 2. Product Name: HNS JET PERFORATING GUN ASSEMBLIES as listed in Annex 1 to this certificate. 3. Manufacturer's Name: GeoKey Ltd, UK. 4. Applicant's Name: GeoKey Ltd, UK. 5. Attachments to this Certificate: Annex 1: products covered by this certificate. Being a notified body in accordance with the GB Statutory Instrument No 2714 (1993) and Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses, the Explosives Notified Body certifies that the above type of product has been examined using Module B of the system for attesting conformity and has been found to conform with the manufacturer's specifications for the type and with the relevant requirements of the Statutory Instrument and the Directive. Dr R K Wharton Director, GB Explosives Notified Body 11 April 2008

ENB09 – Issue 5 – 17/12/99 Page 1 of 2

ANNEX 1 TO EC TYPE EXAMINATION CERTIFICATE ENB/B/150/008 Issue 1 2.500” OD, 0-6 SPF HNS Expendable Hollow Carrier Gun 3.375” OD, 0-6 SPF HNS Expendable Hollow Carrier Gun 4.500” OD, 0-6 SPF HNS Expendable Hollow Carrier Gun 4.625” OD, 0-6 SPF HNS Expendable Hollow Carrier Gun made up from detonating cords, boosters and shaped charges that have been CE-Marked by the GB Explosives Notified Body, UK or INERIS, France or BAM, Germany and are listed on the EC Type Examination Certificates identified below. Detonating Cords Certificate No. 0080.EXP.97.0022 issued by INERIS (France). Certificate No. 0589.EXP.1251/01 issued by BAM (Germany). Boosters Certificate No. 0080.EXP.98.0028 issued by INERIS (France). Certificate No. 0080.EXP.01.0011.C3 issued by INERIS (France). Shaped Charges Certificate No. ENB/B/040 issued by GB Explosives Notified Body (UK). Certificate No. 0080.EXP.05.0016 issued by INERIS (France). Certificate No. 0080.EXP.05.0022 issued by INERIS (France).

ENB09 – Issue 5 – 17/12/99 Page 2 of 2



NOTIFIED BODY NO: 0519 CERTIFICATE NO: ENB/B/171/11 Issue 1 1. Product Type: High (Blasting) Explosive. 2. Product Name: AMMONIUM NITRATE / FUEL OIL EXPLOSIVE as listed in

Annex 1 to this certificate. 3. Manufacturer's Name and Address: Girisim Ltd, Turkey.

4. Applicant's Name and Address: Girisim Ltd, Turkey 5. Attachments to this Certificate: Annex 1: products covered by this certificate. Being a notified body in accordance with the GB Statutory Instrument No 2714 (1993) and Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses, the Explosives Notified Body certifies that the above type of product has been examined using Module B of the system for attesting conformity and has been found to conform with the manufacturer's specifications for the type and with the relevant requirements of the Statutory Instrument and the Directive.

S G Myatt Director, GB Explosives Notified Body 4 May 2011

ENB09 – Issue 5 – 17/12/99 Page 1 of 2

ANNEX 1 TO EC TYPE EXAMINATION CERTIFICATE ENB/B/171/11 Issue 1 KAPEKS ANFO

ENB09 – Issue 5 – 17/12/99 Page 2 of 2

ENB09 – Issue 5 – 17/12/99 Page 1 of 4




NOTIFIED BODY NO: 0519 CERTIFICATE NO: ENB/B/036/13 Issue 22 1. Product Type: High (Blasting) Explosive. 2. Product Name: HMX OPEN-FACED SHAPED CHARGES as listed in Annex 1 to this certificate. 3. Manufacturer's Name and Address: Halliburton Energy Services, USA. 4. Applicant's Name and Address: Halliburton Energy Services, USA. 5. Attachments to this Certificate: Annex 1: products covered by this certificate. Being a notified body in accordance with the GB Statutory Instrument No 2714 (1993) and Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses, the Explosives Notified Body certifies that the above type of product has been examined using Module B of the system for attesting conformity and has been found to conform with the manufacturer's specifications for the type and with the relevant requirements of the Statutory Instrument and the Directive. Dr S G Myatt Director, GB Explosives Notified Body 3 October 2013

ENB09 – Issue 5 – 17/12/99 Page 2 of 4

ANNEX 1 TO EC TYPE EXAMINATION CERTIFICATE ENB/B/036/13 Issue 22

Old JRC Number Part Number Description

.18729

100000139 CHARGE TUBING PUNCH 1-9/16”HMX HEAVY WALL

.30520

100000361 CHARGE - 1-9/16 IN - SSB III - HMX

.34340

100000407 CHARGE ASSY , 3 1/8 GSC, 12.5 GRAM HMX

993.53093 100005306 CHG, TBG PNCHR, HMX 1 9/16 GUN

993.53218 100005312 CHG, 3 3/8in, 12SPF, HMX, BH

993.53308 100005327 CHARGE,4.62IN, 6SPF, DP, HMX

993.53322 100005329 CHG, 2 3/4, 6SPF, HMX, DP

993.53339 100005332 CHG, 3 3/8 IN, HMX, DP

993.53502 100005340 CHARGE, 4.625, OMNI, 12S PF, HMX

993.53285 100008017 CHG, 2 IN, SIDEWINDER II, HMX, DP

993.53094 100008249 CHARGE - 3 3/8” - 6SPF - HMX - SUPER DP

993.53330

100010319 SPF, HMX, SUPER DP, LNR

993.53374

100010399 CHG, 2 3/4 IN SDP, STL, HMX

993.53501 100014352 CHG, 4 5/8 HSD, HMX DP/STL

995.53001 100014486 CHG, 2 IN, TBG PNCHR, HMX

.40040

100118272 CHARGE - 5” - 5 SPF - HMX - DP

993.53191 100156994 CHG, 6 IN, HMX, DP CHRGS

993.53197 100156995 CHG, 4.625, 12SPF, SH, HMX

993.53280

100157005 CHG, 4.625, 18 SPF, HMX, DP

993.53282 100157006 CHG, 4 5/8 IN, HMX, BH

993.53315 100157011 CHG, 5 1/8, 14 SPF, HMX

993.53320

100157013 CHARGE - 2 3/4” - 6SPF - HMX - DP - LD

993.53346 100157017 CHG, 3.375 IN, HMX, BH

993.53392 100157028 CHG, 1 9/16, MILLENNIUM, HMX, SDP

993.53426 100157043 CHG, SHAPE, VENTING DEVICE, HMX

993.53465 101206246 CHARGE - 2 INCH - BH – HMX

993.53462 101206251 CHG, 2-1/2 IN, DP, HMX, MILLENNIUM

NA 101207640 CHARGE, 3 3/8, DP, ZINC, HMX

NA 101207997 CHG, 7 IN, 12SPF, HMX, MILLENNIUM

ENB09 – Issue 5 – 17/12/99 Page 3 of 4


NA 101208224 CHARGE - 2 INCH - MILLENNIUM - HMX

NA 101210636 CHG, SDP, 4 IN, 4SPF, HMX, MILLENNIUM

NA 101210674 4.50 12 SPF HMX MILLENNIUM SDP

NA 101216770 CHG, 5 1/8, 12 SPF, HMX, SH, ZINC, 2.36

NA 101233690 CHG, 4 5/8 IN, 12 SPF, SH, HMX, ZINC

NA 101233817 CHARGE 2.75-IN 6 SPF MILLENNIUM SDP HMX


NA 101270158 CHARGE, BH, 2.75 IN, HMX

NA 101284384 CHG, 7 IN, 12/14 SPF, HMX, BH/LD

NA 101286610 CHARGE 3.38-IN 6 SPF ENHANCED MILLENNIUM

NA 101309223 CHARGE - 3.38” - 6 SPF DOMINATOR - HMX

NA 101326260 CHARGE, 1 3/4, 6 SPF, DOMINATOR, HMX

NA 101340735 CHARGE, RELEASE, EASY PASS, GUN HANGER, HMX

NA 101366678 CHARGE, 3.125 IN, MILLENNIUM, DP, HMX

NA 101368136 CHARGE, 2.75”, 6 SPF, FRAC CHARGE, HMX

NA 101371884 CHARGE, 3 1/8” & 3 3/8”, 6 SPF, HMX, SDP

NA 101388406 CHARGE, 2.88 IN, 6 SPF, MILLENNIUM, HMX

NA 101414743 Charge, 2-7/8 HMX Dominator-QQ; formerly known as CHARGE, 2 7/8”, DOMINATOR, HMX

NA 101418095 CHARGE, F/2 1/2”, MILLENNIUM II, 6SPF, HMX

NA 101434895 CHARGE, TUBING PUNCHER 1 9/16” HMX


NA 101446899 CHARGE, 4 5/8”, 39 GM, HMX, DP, 180 DEGREE PHASE, KLEENZONE

NA 101466192 CHARGE, 4 5/8”, 39 GM, HMX, DP +/- 10 DEG. PHASE, WITH STRAIGHT SLOT, KLEENZONE

NA 101571815 CHARGE, 2 7/8” G-FORCE, HMX, DP

NA 101602465 CHARGE, BALLISTIC TRANSFER, HMX, 1.85 g

NA 101603801 CHARGE, 2”, MAXFORCE, HMX

ENB09 – Issue 5 – 17/12/99 Page 4 of 4


993.53313 120038060 CHARGE - 4 5/8” - OMNI - 12SPF - HMX

NA 101787632 CHARGE-4.750”- 14 SPF, HP, H, HMX

NA 101836953 7 IN MIRAGE, HMX, BH HW SHAPED CHARGE

N/A 101833417 7 IN MIRAGE, BH HMX SHAPED CHARGE, 44 g





N/A 101716920 7 IN MIRAGE HMX BH SHAPED CHARGE

N/A 101936060 4.625 IN MAXFORCE, HMX, 5SPF SHAPED CHARGE

N/A 101826652 2.875 IN HMX MAXFORCE SHAPED CHARGE

N/A 101590845 2.375 IN MAXFORCE, HMX SHAPED CHARGE

N/A 101702911 4.625 IN MILLENNIUM II, HMX, 5 SPF SHAPED CHARGE, 39 g

N/A 101329124 6.5 IN MIRAGE HMX 47g BH/LD SHAPED CHARGE

N/A 101351605 3.125 IN MIRAGE SUPER HOLE, HMX 14 g SHAPED CHARGE


N/A 101591373 2.375 IN HMX 10 g BH SHAPED CHARGE

N/A 102054947 390 MAXFORCE, HMX, SDP, SHAPED CHARGE

N/A 101711688 7 IN MIRAGE HMX, BH 39 g SHAPED CHARGE

N/A 102127122 210 MAXFORCE – FRAC 21 g SHAPED CHARGE

N/A 102036926 220 MAXFORCE-FLOW, BH, HMX SHAPED CHARGE, 22 g

N/A 102186883 150 MAXFORCE-FRAC, HMX, I.S SHAPED CHARGE, 15 g

N/A 102327840 140 MAXFORCE FLOW, BIG HOLE, HMX SHAPED CHARGE 14 G

ENB09 – Issue 5 – 17/12/99 Page 1 of 4




NOTIFIED BODY NO: 0519 CERTIFICATE NO: ENB/B/036/13 Issue 22 1. Product Type: High (Blasting) Explosive. 2. Product Name: HMX OPEN-FACED SHAPED CHARGES as listed in Annex 1 to this certificate. 3. Manufacturer's Name and Address: Halliburton Energy Services, USA. 4. Applicant's Name and Address: Halliburton Energy Services, USA. 5. Attachments to this Certificate: Annex 1: products covered by this certificate. Being a notified body in accordance with the GB Statutory Instrument No 2714 (1993) and Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses, the Explosives Notified Body certifies that the above type of product has been examined using Module B of the system for attesting conformity and has been found to conform with the manufacturer's specifications for the type and with the relevant requirements of the Statutory Instrument and the Directive. Dr S G Myatt Director, GB Explosives Notified Body 3 October 2013

ENB09 – Issue 5 – 17/12/99 Page 2 of 4



.18729

100000139 CHARGE TUBING PUNCH 1-9/16”HMX HEAVY WALL

.30520

100000361 CHARGE - 1-9/16 IN - SSB III - HMX

.34340

100000407 CHARGE ASSY , 3 1/8 GSC, 12.5 GRAM HMX

993.53093 100005306 CHG, TBG PNCHR, HMX 1 9/16 GUN

993.53218 100005312 CHG, 3 3/8in, 12SPF, HMX, BH

993.53308 100005327 CHARGE,4.62IN, 6SPF, DP, HMX

993.53322 100005329 CHG, 2 3/4, 6SPF, HMX, DP

993.53339 100005332 CHG, 3 3/8 IN, HMX, DP

993.53502 100005340 CHARGE, 4.625, OMNI, 12S PF, HMX

993.53285 100008017 CHG, 2 IN, SIDEWINDER II, HMX, DP

993.53094 100008249 CHARGE - 3 3/8” - 6SPF - HMX - SUPER DP

993.53330

100010319 SPF, HMX, SUPER DP, LNR

993.53374

100010399 CHG, 2 3/4 IN SDP, STL, HMX

993.53501 100014352 CHG, 4 5/8 HSD, HMX DP/STL

995.53001 100014486 CHG, 2 IN, TBG PNCHR, HMX

.40040

100118272 CHARGE - 5” - 5 SPF - HMX - DP

993.53191 100156994 CHG, 6 IN, HMX, DP CHRGS

993.53197 100156995 CHG, 4.625, 12SPF, SH, HMX

993.53280

100157005 CHG, 4.625, 18 SPF, HMX, DP

993.53282 100157006 CHG, 4 5/8 IN, HMX, BH

993.53315 100157011 CHG, 5 1/8, 14 SPF, HMX

993.53320

100157013 CHARGE - 2 3/4” - 6SPF - HMX - DP - LD

993.53346 100157017 CHG, 3.375 IN, HMX, BH

993.53392 100157028 CHG, 1 9/16, MILLENNIUM, HMX, SDP

993.53426 100157043 CHG, SHAPE, VENTING DEVICE, HMX

993.53465 101206246 CHARGE - 2 INCH - BH – HMX

993.53462 101206251 CHG, 2-1/2 IN, DP, HMX, MILLENNIUM

NA 101207640 CHARGE, 3 3/8, DP, ZINC, HMX

NA 101207997 CHG, 7 IN, 12SPF, HMX, MILLENNIUM

ENB09 – Issue 5 – 17/12/99 Page 3 of 4


NA 101208224 CHARGE - 2 INCH - MILLENNIUM - HMX

NA 101210636 CHG, SDP, 4 IN, 4SPF, HMX, MILLENNIUM

NA 101210674 4.50 12 SPF HMX MILLENNIUM SDP

NA 101216770 CHG, 5 1/8, 12 SPF, HMX, SH, ZINC, 2.36

NA 101233690 CHG, 4 5/8 IN, 12 SPF, SH, HMX, ZINC



NA 101270158 CHARGE, BH, 2.75 IN, HMX

NA 101284384 CHG, 7 IN, 12/14 SPF, HMX, BH/LD

NA 101286610 CHARGE 3.38-IN 6 SPF ENHANCED MILLENNIUM

NA 101309223 CHARGE - 3.38” - 6 SPF DOMINATOR - HMX

NA 101326260 CHARGE, 1 3/4, 6 SPF, DOMINATOR, HMX

NA 101340735 CHARGE, RELEASE, EASY PASS, GUN HANGER, HMX

NA 101366678 CHARGE, 3.125 IN, MILLENNIUM, DP, HMX

NA 101368136 CHARGE, 2.75”, 6 SPF, FRAC CHARGE, HMX

NA 101371884 CHARGE, 3 1/8” & 3 3/8”, 6 SPF, HMX, SDP

NA 101388406 CHARGE, 2.88 IN, 6 SPF, MILLENNIUM, HMX

NA 101414743 Charge, 2-7/8 HMX Dominator-QQ; formerly known as CHARGE, 2 7/8”, DOMINATOR, HMX

NA 101418095 CHARGE, F/2 1/2”, MILLENNIUM II, 6SPF, HMX



NA 101446899 CHARGE, 4 5/8”, 39 GM, HMX, DP, 180 DEGREE PHASE, KLEENZONE

NA 101466192 CHARGE, 4 5/8”, 39 GM, HMX, DP +/- 10 DEG. PHASE, WITH STRAIGHT SLOT, KLEENZONE

NA 101571815 CHARGE, 2 7/8” G-FORCE, HMX, DP

NA 101602465 CHARGE, BALLISTIC TRANSFER, HMX, 1.85 g

NA 101603801 CHARGE, 2”, MAXFORCE, HMX

ENB09 – Issue 5 – 17/12/99 Page 4 of 4


993.53313 120038060 CHARGE - 4 5/8” - OMNI - 12SPF - HMX

NA 101787632 CHARGE-4.750”- 14 SPF, HP, H, HMX

NA 101836953 7 IN MIRAGE, HMX, BH HW SHAPED CHARGE






N/A 101716920 7 IN MIRAGE HMX BH SHAPED CHARGE

N/A 101936060 4.625 IN MAXFORCE, HMX, 5SPF SHAPED CHARGE

N/A 101826652 2.875 IN HMX MAXFORCE SHAPED CHARGE

N/A 101590845 2.375 IN MAXFORCE, HMX SHAPED CHARGE

N/A 101702911 4.625 IN MILLENNIUM II, HMX, 5 SPF SHAPED CHARGE, 39 g

N/A 101329124 6.5 IN MIRAGE HMX 47g BH/LD SHAPED CHARGE



N/A 101591373 2.375 IN HMX 10 g BH SHAPED CHARGE

N/A 102054947 390 MAXFORCE, HMX, SDP, SHAPED CHARGE

N/A 101711688 7 IN MIRAGE HMX, BH 39 g SHAPED CHARGE

N/A 102127122 210 MAXFORCE – FRAC 21 g SHAPED CHARGE

N/A 102036926 220 MAXFORCE-FLOW, BH, HMX SHAPED CHARGE, 22 g

N/A 102186883 150 MAXFORCE-FRAC, HMX, I.S SHAPED CHARGE, 15 g

N/A 102327840 140 MAXFORCE FLOW, BIG HOLE, HMX SHAPED CHARGE 14 G



NOTIFIED BODY NO: 0519 CERTIFICATE NO: ENB/B/023/12 Issue 2 1. Product Type: High (Blasting) Explosive. 2. Product Name: PRESSED PELLETS OF HNS FOR DRILL COLLAR SEVERING TOOL as listed in Annex 1 to this certificate. 3. Manufacturer's Name and Address: Halliburton Energy Services, USA. 4. Applicant's Name and Address: Halliburton Energy Services, USA. 5. Attachments to this Certificate: Annex 1: products covered by this certificate. Being a notified body in accordance with the GB Statutory Instrument No 2714 (1993) and Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses, the Explosives Notified Body certifies that the above type of product has been examined using Module B of the system for attesting conformity and has been found to conform with the manufacturer's specifications for the type and with the relevant requirements of the Statutory Instrument and the Directive. Mr S.G Myatt Director, GB Explosives Notified Body 30 January 2012

ENB09 – Issue 5 – 17/12/99 Page 1 of 2

ENB09 – Issue 5 – 17/12/99 Page 2 of 2

ANNEX 1 TO EC TYPE EXAMINATION CERTIFICATE ENB/B/023/12 Issue 2 Pellet 1 3/8" - 500 Degrees - DCST - A, Part Nos. S274-20 & 120135256 Pellet 1 3/4" - 500 Degrees - DCST - A, Part Nos. S267-42 & 100118421 Pellet 2" - 500 Degrees - DCST - A, Part Nos. S282-27 & 101015435 Pellet 2 5/8" - 500 Degrees - DCST - A, Part Nos. S269-31 & 101295855

ENB09 – Issue 5 – 17/12/99 Page 1 of 2




NOTIFIED BODY NO: 0519 CERTIFICATE NO: ENB/B/040/13 Issue 16 1. Product Type: High (Blasting) Explosive. 2. Product Name: HNS OPEN-FACE SHAPED CHARGES as listed in Annex 1 to this certificate. 3. Manufacturer's Name and Address: Halliburton Energy Services, USA. 4. Applicant's Name and Address: Halliburton Energy Services, Jet Research Center, USA. 5. Attachments to this Certificate: Annex 1: products covered by this certificate. Being a notified body in accordance with the GB Statutory Instrument No 2714 (1993) and Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses, the Explosives Notified Body certifies that the above type of product has been examined using Module B of the system for attesting conformity and has been found to conform with the manufacturer's specifications for the type and with the relevant requirements of the Statutory Instrument and the Directive. Dr S G Myatt Director, GB Explosives Notified Body 11 September 2013

ENB09 – Issue 5 – 17/12/99 Page 2 of 2

ANNEX 1 TO EC TYPE EXAMINATION CERTIFICATE ENB/B/040/13 Issue 16 Charge, Drop Bar Initiator (HNS), Part No. 100005310 Charge, 2 inch Sidewinder II, DP HNS, Part No. 100157018 Charge, 2.5 inch, DP HNS, Part No. 101244923 Charge, 2.75 inch, SDP HNS, Part No. 101251723 Charge, 4 inch, 6 SPF, DP HNS, Part No. 101282511 Charge, 3.38 inch, 6 SPF, Dominator SR2 HNS, Part No. 101320075 Charge, 4.62 inch, 6 SPF, DP HNS, Part No. 101315694 Charge, 2.75 inch, 6 SPF, DP HNS, Part No. 101318485 Charge, 4.62 inch, 6 SPF, DP HNS, Part No. 101332806 Charge, Venting Device, HNS, Part No. 101288565 Charge, 1.75 inch, HNS, Part No. 101334897 Charge, 3.38 inch, 6 SPF, DP, HNS, Part No. 101323187 Charge, 3.38 inch, 6 SPF, Zinc, DP, HNS, Part No. 101323188 Charge, 4 inch, 4 SPF, DP, HNS, Part No. 101287306 Charge, 4 5/8 inch, Dominator MR2, HNS, Part No. 101356077 Charge, 3.38 inch, 6 SPF, Millennium, HNS, Part No. 101365876 Charge, Release, Easy Pass, Gun Hanger, HNS, Part No. 101343699 Charge, 2.88 inch, 6 SPF, Millennium II, HNS, Part No. 101388407 Charge, 4 5/8”, 39 GM, HNS, DP, 180 Degree Phase, Kleenzone, Part No. 101446897 Charge, Venting Device, HNS, Part No. 101602467 Charge, 4 5/8”, 12 SPF, DP, HNS, Part No. 101343830 Charge, 4.625 inch, MIRAGE, SH, HNS, 28GM, Part No. 101606857 Charge, 250 Dominator, HNS 1001, 25g, Part Number 102326523. Charge, 2.875” G Force, HNS DP, 10.5 g, Part Number 102322181. Charge, 3.125” Millennium DP, HNS, 21 g, Part Number 102322540.



NOTIFIED BODY NO: 0519 CERTIFICATE NO: ENB/B/041/12 Issue 2 1. Product Type: High (Blasting) Explosive. 2. Product Name: HNS CARTRIDGES as listed in Annex 1 to this

certificate. 3. Manufacturer's Name and Address: Halliburton Energy Services, USA. 4. Applicant's Name and Address: Halliburton Energy Services, USA. 5. Attachments to this Certificate: Annex 1: products covered by this certificate. Being a notified body in accordance with the GB Statutory Instrument No 2714 (1993) and Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses, the Explosives Notified Body certifies that the above type of product has been examined using Module B of the system for attesting conformity and has been found to conform with the manufacturer's specifications for the type and with the relevant requirements of the Statutory Instrument and the Directive. Mr S.G Myatt Director, GB Explosives Notified Body 30 January 2012

ENB09 – Issue 5 – 17/12/99 Page 1 of 2

ENB09 – Issue 5 – 17/12/99 Page 2 of 2

ANNEX 1 TO EC TYPE EXAMINATION CERTIFICATE ENB/B/041/12 Issue 2 Cartridge Assembly 1.75 inch, 500 Degrees F, DCST-A, Part Nos. 100118422 & S267-43 Cartridge Assembly, 2 inch, 500 Degrees F, DCST-A, Part Nos. 101015436 & S282-28 Cartridge Assembly, 2.625 inch, 500 Degrees F, DCST-A, Part Nos. 101295865 & S269-30 Cartridge Assembly, 1.375 inch, 500 Degrees F, DCST-A, Part Nos. 120135257 & S274-25



NOTIFIED BODY NO: 0519 CERTIFICATE NO: ENB/B/042/005 Issue 2 1. Product Type: High (Blasting) Explosive. 2. Product Name: HMX (LX-10) CARTRIDGES as listed in Annex 1 to this

certificate. 3. Manufacturer's Name: Halliburton Energy Services, USA. 4. Applicant's Name: Halliburton Energy Services, USA. 5. Attachments to this Certificate: Annex 1: products covered by this certificate. Being a notified body in accordance with the GB Statutory Instrument No 2714 (1993) and Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses, the Explosives Notified Body certifies that the above type of product has been examined using Module B of the system for attesting conformity and has been found to conform with the manufacturer's specifications for the type and with the relevant requirements of the Statutory Instrument and the Directive. Dr R K Wharton Director, GB Explosives Notified Body 18 March 2005

ENB09 – Issue 5 – 17/12/99 Page 1 of 2

ANNEX 1 TO EC TYPE EXAMINATION CERTIFICATE ENB/B/042/005 Issue 2 Cartridge Assembly, 1.75 inch, 400 Degrees F, DCST-A, Part Nos. 100015146 & S267-23 Cartridge Assembly, 1.375 inch, 400 Degrees F, DCST, Part Nos. 100118419 & S274-15 Cartridge Assembly, 2 inch, Drill Collar Cutter Hi-Temp, Part Nos. 100118426 & S282-23 Cartridge Assembly, 2.625 inch, 400 Degrees F, DCST-A, Part Nos. 100118429 & S269-12 Cartridge Assembly, 2 5/8 inch DCST with 1 3/8 inch MDF, 400 Degrees F, Part No. 101293161

ENB09 – Issue 5 – 17/12/99 Page 2 of 2



NOTIFIED BODY NO: 0519 CERTIFICATE NO: ENB/B/044/007 Issue 3 1. Product Type: High (Blasting) Explosive. 2. Product Name: HMX CAPSULE CHARGES as listed in Annex 1 to this

certificate. 3. Manufacturer's Name: Halliburton Energy Services, USA. 4. Applicant's Name: Halliburton Energy Services, USA. 5. Attachments to this Certificate: Annex 1: products covered by this certificate. Being a notified body in accordance with the GB Statutory Instrument No 2714 (1993) and Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses, the Explosives Notified Body certifies that the above type of product has been examined using Module B of the system for attesting conformity and has been found to conform with the manufacturer's specifications for the type and with the relevant requirements of the Statutory Instrument and the Directive. Dr R K Wharton Director, GB Explosives Notified Body 22 June 2007

ENB09 – Issue 5 – 17/12/99 Page 1 of 2

ANNEX 1 TO EC TYPE EXAMINATION CERTIFICATE ENB/B/044/007 Issue 3 Charge -1.68 - Dyna-Star HMX, Part No. 100005449 Charge, Millennium Deep Star, 1.688 HMX, Part No. 101346618 Charge - 2.12 - Dyna-Star HMX, Part No. 100008259 Charge, Deep Star IV, 2.125 HMX, Part No. 100009448 Charge, Millennium Deep Star, 2.125 HMX, Part No. 101210198 Charge, Deep Star, Spiral, 2.125 HMX, Part No. 101216268 Charge, 1 11/16 in. Maxforce, Deep Star, HMX, Part No. 101521848

ENB09 – Issue 5 – 17/12/99 Page 2 of 2



NOTIFIED BODY NO: 0519 CERTIFICATE NO: ENB/B/045/002 Issue 1 1. Product Type: High (Blasting) Explosive. 2. Product Name: RDX CAPSULE CHARGES as listed in Annex 1 to this

certificate. 3. Manufacturer's Name: Halliburton Energy Services, USA. 4. Applicant's Name: Halliburton Energy Services, USA. 5. Attachments to this Certificate: Annex 1: products covered by this certificate. Being a notified body in accordance with the GB Statutory Instrument No 2714 (1993) and Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses, the Explosives Notified Body certifies that the above type of product has been examined using Module B of the system for attesting conformity and has been found to conform with the manufacturer's specifications for the type and with the relevant requirements of the Statutory Instrument and the Directive. Dr R K Wharton Director, GB Explosives Notified Body 10 September 2002

ENB09 – Issue 5 – 17/12/99 Page 1 of 2

ANNEX 1 TO EC TYPE EXAMINATION CERTIFICATE ENB/B/045/002 Issue 1 Charge -1.68 - Dyna-Star RDX, Part No. 100005450 Charge - 2.12 - Dyna-Star RDX, Part No. 100005448 Charge, Deep Star IV, 2.125 RDX, Part No. 100014345 Charge, Deep Star, Spiral, 2.125 RDX, Part No. 101215439

ENB09 – Issue 5 – 17/12/99 Page 2 of 2



NOTIFIED BODY NO: 0519 CERTIFICATE NO: ENB/B/048/002 Issue 1 1. Product Type: High (Blasting) Explosive. 2. Product Name: NON-ELECTRIC DETONATORS-HMX as listed in Annex 1 to

this certificate. 3. Manufacturer's Name: Halliburton Energy Services, USA. 4. Applicant's Name: Halliburton Energy Services, USA. 5. Attachments to this Certificate: Annex 1: products covered by this certificate. Being a notified body in accordance with the GB Statutory Instrument No 2714 (1993) and Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses, the Explosives Notified Body certifies that the above type of product has been examined using Module B of the system for attesting conformity and has been found to conform with the manufacturer's specifications for the type and with the relevant requirements of the Statutory Instrument and the Directive. Dr R K Wharton Director, GB Explosives Notified Body 5 December 2002

ENB09 – Issue 5 – 17/12/99 Page 1 of 2

ANNEX 1 TO EC TYPE EXAMINATION CERTIFICATE ENB/B/048/002 Issue 1 DET CORD INITIATOR (HMX), Part No. 100005307. DETONATOR - NON-ELECTRIC, Part No. 100015136. INITIATOR - DET CORD - HMX - THREADED, Part No. 100008252

ENB09 – Issue 5 – 17/12/99 Page 2 of 2



NOTIFIED BODY NO: 0519 CERTIFICATE NO: ENB/B/049/002 Issue 1 1. Product Type: High (Blasting) Explosive. 2. Product Name: TUBING CUTTERS-HMX as listed in Annex 1 to this certificate. 3. Manufacturer's Name: Halliburton Energy Services, USA. 4. Applicant's Name: Halliburton Energy Services, USA. 5. Attachments to this Certificate: Annex 1: products covered by this certificate. Being a notified body in accordance with the GB Statutory Instrument No 2714 (1993) and Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses, the Explosives Notified Body certifies that the above type of product has been examined using Module B of the system for attesting conformity and has been found to conform with the manufacturer's specifications for the type and with the relevant requirements of the Statutory Instrument and the Directive. Dr R K Wharton Director, GB Explosives Notified Body 4 November 2002

ENB09 – Issue 5 – 17/12/99 Page 1 of 2

ANNEX 1 TO EC TYPE EXAMINATION CERTIFICATE ENB/B/049/002 Issue 1 Charge, Tubing Cutter, 1 11/16” OD, HMX, Ceramic, Part Nos. 100000352 and C1693000 Charge, Tubing Cutter, 1 13/16” OD, HMX, Ceramic, Part Nos. 100000353 and C1813000 Charge, Tubing Cutter, 2 1/32” OD, HMX, Ceramic, Part Nos. 100000354 and C2033000 Charge, Tubing Cutter, 2 1/8” OD, HMX, Ceramic, Part Nos. 100000355 and C2133000 Charge, Tubing Cutter, 2 1/4” OD, HMX, Ceramic, Part Nos. 100000356 and C2253000 Charge, Tubing Cutter, 2 1/8”, Hastelloy Tubing, HMX Ceramic, Part Nos. 100000430 and C2133081. Charge, Tubing Cutter, 2.70” OD, Hastelloy Tubing, HMX, Part Nos. 100000431 and C2703081 Charge, Tubing Cutter, 1 3/8” OD, HMX, Ceramic, Part Nos. 100000569 and C1383000 Charge, Tubing Cutter, 1 23/32” OD, HMX, Ceramic, Part Nos. 100000570 and C1723000 Tubing Cutter, 1.562” OD, HMX, 4.6 GM SUPERCUTTER, Part Nos. 100005493 and C156300. Tubing Cutter, 1.812” OD, HMX, 8.4 GM SUPERCUTTER, Part Nos. 100008057 and C1813000. Charge, Tubing Cutter, 2.70” OD, HMX, Ceramic, Part Nos. 100011034 and C2703000. Charge, Tubing Cutter, 1 9/16” OD, HMX, Ceramic, Part Nos. 100083086 and C1563000. Charge, Tubing Cutter, 2 19/32” OD, HMX, Ceramic, Part Nos. 100116367 and C2593000. Tubing Cutter, 1 11/16”, Cast Iron Cap, HMX, Part Nos. 101288527 and C168300. Tubing Cutter, 1 13/16”, Cast Iron Cap, HMX, Part Nos. 101290400 and C1813000. Tubing Cutter, 2 1/8”, Cast Iron Cap, HMX, Part Nos. 101290402 and C2133000B. Tubing Cutter, 2 1/4”, Cast Iron Cap, HMX, Part Nos. 101290405 and C2253000B. Tubing Cutter, 2 1/2”, Cast Iron Cap, HMX, Part Nos. 101290406 and C2383045B.

ENB09 – Issue 5 – 17/12/99 Page 2 of 2



NOTIFIED BODY NO: 0519 CERTIFICATE NO: ENB/B/050/002 Issue 1 1. Product Type: High (Blasting) Explosive. 2. Product Name: HMX BOOSTER RODS as listed in Annex 1 to this certificate. 3. Manufacturer's Name: Halliburton Energy Services, USA. 4. Applicant's Name: Halliburton Energy Services, USA. 5. Attachments to this Certificate: Annex 1: products covered by this certificate. Being a notified body in accordance with the GB Statutory Instrument No 2714 (1993) and Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses, the Explosives Notified Body certifies that the above type of product has been examined using Module B of the system for attesting conformity and has been found to conform with the manufacturer's specifications for the type and with the relevant requirements of the Statutory Instrument and the Directive. Dr R K Wharton Director, GB Explosives Notified Body 4 December 2002

ENB09 – Issue 5 – 17/12/99 Page 1 of 2

ANNEX 1 TO EC TYPE EXAMINATION CERTIFICATE ENB/B/050/002 Issue 1 BOOSTER ROD - 4.0 CC - HMX (PELLET, HMX, 4.000 CC (P78120)), Part No. 100158152. BOOSTER ROD (PELLET, HMX, 4.500 CC (P78120) CD, DET), Part No. 100158153. BOOSTER ROD (PELLET, HMX, 7.125 CC (P78120), Part No. 100158154. BOOSTER ROD (PELLET, HMX, 8.188 CC (P78120) CD, DET), Part No. 100158155. BOOSTER ROD (ROD, BSTR, HMX, 0.205 OD X 1.460 LG), Part No. 100158223. BOOSTER ROD (PELLET - 5 3/8 - CASING CUTTER - HMX (P78120)), Part No. 101293552. BOOSTER ROD (PELLET, HMX, 6.000 CC (P78120)), Part No. 120021223.

ENB09 – Issue 5 – 17/12/99 Page 2 of 2



NOTIFIED BODY NO: 0519 CERTIFICATE NO: ENB/B/056/003 Issue 1 1. Product Type: High (Blasting) Explosive. 2. Product Name: CHARGE, CASING & DRILL PIPE CUTTERS-HMX as listed in

Annex 1 to this certificate. 3. Manufacturer's Name: Halliburton Energy Services, USA. 4. Applicant's Name: Halliburton Energy Services, USA. 5. Attachments to this Certificate: Annex 1: products covered by this certificate. Being a notified body in accordance with the GB Statutory Instrument No 2714 (1993) and Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses, the Explosives Notified Body certifies that the above type of product has been examined using Module B of the system for attesting conformity and has been found to conform with the manufacturer's specifications for the type and with the relevant requirements of the Statutory Instrument and the Directive. Dr R K Wharton Director, GB Explosives Notified Body 10 February 2003

ENB09 – Issue 5 – 17/12/99 Page 1 of 2

ANNEX 1 TO EC TYPE EXAMINATION CERTIFICATE ENB/B/056/003 Issue 1 Charge, Drill Pipe Cutter, 2 3/8” O.D., HMX, Part Nos. 100116368 and C2383045 Charge, Drill Pipe Cutter, 2 15/16” O.D., HMX, Part Nos. 100127821 and C2943045 Charge, Drill Pipe Cutter, 3 5/16” O.D., HMX, Part Nos. 100000140 and C3313045 Charge, Casing Cutter, 3 5/8” O.D., HMX, Part Nos. 101293449 and C3633045 Charge, Casing Cutter, 4” O.D., HMX, Part Nos. 101293457 and C4003045 Charge, Casing Cutter, 4 1/2” O.D., HMX, Part Nos. 100014494 and C4503045 Charge, Casing Cutter, 4 3/4” O.D., HMX, Part Nos. 101293484 and C4753045 Charge, Casing Cutter, 5 3/8” O.D., HMX, Part Nos. 101293491 and C5383045 Charge, Casing Cutter, 5 1/2” O.D., HMX, Part Nos. 101293515 and C5503045 Charge, Casing Cutter, 6” O.D., HMX, Part Nos. 101293536 and C6003045 Charge, Casing Cutter, 6 1/8” O.D., HMX, Part Nos. 101293544 and C6133045 Charge, Casing Cutter, 7 1/4” O.D., HMX, Part Nos. 101293553 and C7253045 Charge, Casing Cutter, 8 3/16” O.D., HMX, Part Nos. 101293555 and C81930405

ENB09 – Issue 5 – 17/12/99 Page 2 of 2



NOTIFIED BODY NO: 0519 CERTIFICATE NO: ENB/B/073/008 Issue 2 1. Product Type: High (Blasting) Explosive. 2. Product Name: LINEAR SHAPED CHARGES-RDX as listed in Annex 1 to this

certificate. 3. Manufacturer's Name: Halliburton Energy Services, USA. 4. Applicant's Name: Halliburton Energy Services, USA. 5. Attachments to this Certificate: Annex 1: products covered by this certificate. Being a notified body in accordance with the GB Statutory Instrument No 2714 (1993) and Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses, the Explosives Notified Body certifies that the above type of product has been examined using Module B of the system for attesting conformity and has been found to conform with the manufacturer's specifications for the type and with the relevant requirements of the Statutory Instrument and the Directive. Dr R K Wharton Director, GB Explosives Notified Body 8 February 2008

ENB09 – Issue 5 – 17/12/99 Page 1 of 2

ANNEX 1 TO EC TYPE EXAMINATION CERTIFICATE ENB/B/073/008 Issue 2 Charge, Linear, Shaped, RDX, 600 grains/ft, Part Nos. 101312412 and Y230-600. Charge, Linear, Shaped, RDX, 800 grains/ft, Part Nos. 101312417 and Y230-800. Charge, Linear, Shaped, RDX, 1000 grains/ft, Part Nos. 101312435 and Y230-1000. Charge, Linear, Shaped, RDX, 1200 grains/ft, Part Nos. 101312436 and Y230-1200. Charge, Linear, Shaped, RDX, 1500 grains/ft, Part Nos. 101312441 and Y230-1500. Charge, Linear, Shaped, RDX, 2000 grains/ft, Part Nos. 101312445 and Y230-2000. Charge, Linear, Shaped, RDX, 3200 grains/ft, Part Nos. 101312448 and Y230-3200. Charge, Linear, Shaped, RDX, 4000 grains/ft, Part Nos. 101627952 and Y230-4000.

ENB09 – Issue 5 – 17/12/99 Page 2 of 2



NOTIFIED BODY NO: 0519 CERTIFICATE NO: ENB/B/107/009 Issue 3 1. Product Type: High (Blasting) Explosive. 2. Product Name: CUTTERS, CIRCULAR-RDX as listed in Annex 1 to this

certificate. 3. Manufacturer's Name: Halliburton Energy Services, USA. 4. Applicant's Name: Halliburton Energy Services, USA. 5. Attachments to this Certificate: Annex 1: products covered by this certificate. Being a notified body in accordance with the GB Statutory Instrument No 2714 (1993) and Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses, the Explosives Notified Body certifies that the above type of product has been examined using Module B of the system for attesting conformity and has been found to conform with the manufacturer's specifications for the type and with the relevant requirements of the Statutory Instrument and the Directive. Mr S G Myatt Acting Director, GB Explosives Notified Body 2 July 2009

ENB09 – Issue 5 – 17/12/99 Page 1 of 2

ANNEX 1 TO EC TYPE EXAMINATION CERTIFICATE ENB/B/107/009 Issue 3 Cutter, Inside Circular-RDX, 9.5 in OD, Part No. 100113231 Cutter, Inside Circular-RDX, 12 in OD, Part No. 101216062 Cutter, Inside Circular-RDX, 14.25 in OD, Part No. 101216344 Cutter, Inside Circular-RDX, 18.4 in OD, Part No. 120042265 Cutter, Inside Circular-RDX, 27.6 in OD, Part No. 101216063 Cutter, Outside Circular, Rigid, 13-5/8 in, 3200 gr/ft LSC, RDX, Part No. 101302566 Cutter, Outside Circular, Rigid, 16 in, 3200 gr/ft LSC, RDX, Part No. 101302567 Cutter, Outside Circular, Rigid, 18 in, 3200 gr/ft LSC, RDX, Part No. 101302571 Cutter, Outside Circular, Rigid, 18-5/8 in, 3200 gr/ft LSC, RDX, Part No. 101302572 Cutter, Outside Circular, Rigid, 20 in, 3200 gr/ft LSC, RDX, Part No. 101302573 Cutter, Outside Circular, Rigid, 22 in, 3200 gr/ft LSC, RDX, Part No. 101302574 Cutter, Outside Circular, Rigid, 24 in, 3200 gr/ft LSC, RDX, Part No. 101302577 Cutter, Outside Circular, Rigid, 26 in, 3200 gr/ft LSC , RDX, Part No. 101302578 Cutter, Outside Circular, Rigid, 28 in, 3200 gr/ft LSC , RDX, Part No. 101302579 Cutter, Outside Circular, Rigid, 30 in, 3200 gr/ft LSC , RDX, Part No. 101302612 Cutter, Outside Circular, Rigid, 32 in, 3200 gr/ft LSC, RDX, Part No. 101302635 Cutter, Outside Circular, Rigid, 34 in, 3200 gr/ft LSC, RDX, Part No. 101302637 Cutter, Outside Circular, Rigid, 36 in, 3200 gr/ft LSC, RDX, Part No. 101302638 Cutter, Outside Circular, Rigid, 38 in, 3200 gr/ft LSC, RDX, Part No. 101302639 Cutter, Outside Circular, Rigid, 40 in, 3200 gr/ft LSC, RDX, Part No. 101302641 Cutter, Outside Circular, Rigid, 42 in, 3200 gr/ft LSC, RDX, Part No. 101302642 Cutter, Outside Circular, Rigid, 44 in, 3200 gr/ft LSC, RDX, Part No. 101302643 Cutter, Outside Circular, Rigid, 46 in, 3200 gr/ft LSC, RDX, Part No. 101302645 Cutter, Outside Circular, Rigid, 48 in, 3200 gr/ft LSC, RDX, Part No. 101302646

ENB09 – Issue 5 – 17/12/99 Page 2 of 2



NOTIFIED BODY NO: 0519 CERTIFICATE NO: ENB/B/128/008 Issue 1 1. Product Type: High (Blasting) Explosive. 2. Product Name: TIME DELAY FIRING HEAD ASSEMBLIES as listed in Annex 1

to this certificate. 3. Manufacturer's Name: Halliburton Energy Services, USA. 4. Applicant's Name: Halliburton Energy Services, USA. 5. Attachments to this Certificate: Annex 1: products covered by this certificate. Being a notified body in accordance with the GB Statutory Instrument No 2714 (1993) and Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses, the Explosives Notified Body certifies that the above type of product has been examined using Module B of the system for attesting conformity and has been found to conform with the manufacturer's specifications for the type and with the relevant requirements of the Statutory Instrument and the Directive. Dr R K Wharton Director, GB Explosives Notified Body 15 January 2008

ENB09 – Issue 5 – 17/12/99 Page 1 of 2

ANNEX 1 TO EC TYPE EXAMINATION CERTIFICATE ENB/B/128/008 Issue 1 Firing Head Assembly - 3 3/8 in Time Domain Firer (TDF), Part No. 100005230, Old JRC No. 993.12700. Firing Head Assembly - 2 1/2 in Time Domain Firer (TDF), Part No. 100005231, Old JRC No. 993.13300.

ENB09 – Issue 5 – 17/12/99 Page 2 of 2



NOTIFIED BODY NO: 0519 CERTIFICATE NO: ENB/B/062/12 Issue 10 1. Product Type: High (Blasting) Explosive. 2. Product Name: HNS PERFORATING GUN SYSTEMS as listed in Annex 1 to this certificate. 3. Manufacturer's Name and Address: (1) Halliburton Manufacturing and

Services Ltd, United Kingdom and (2) Halliburton B.V., The Netherlands. 4. Applicant's Name and Address: Halliburton Manufacturing and Services Ltd, United Kingdom. 5. Attachments to this Certificate: Annex 1: products covered by this certificate. Being a notified body in accordance with the GB Statutory Instrument No 2714 (1993) and Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses, the Explosives Notified Body certifies that the above type of product has been examined using Module B of the system for attesting conformity and has been found to conform with the manufacturer's specifications for the type and with the relevant requirements of the Statutory Instrument and the Directive. Mr S G Myatt Director, GB Explosives Notified Body 9 January 2012

ENB09 – Issue 5 – 17/12/99 Page 1 of 2

ANNEX 1 TO EC TYPE EXAMINATION CERTIFICATE ENB/B/062/12 Issue 10 1.563” VannGun Assembly, 2.00” VannGun Assembly, 2.50” VannGun Assembly, 2.75” VannGun Assembly, 2.875” VannGun Assembly, 3.375” VannGun Assembly, 3.50” VannGun Assembly, 4.00” VannGun Assembly, 4.625” VannGun Assembly, 5.00” VannGun Assembly, 5.125” VannGun Assembly, 5.75” VannGun Assembly, 6.50” VannGun Assembly, 7.00” VannGun Assembly, 4.00” Drillable Perforating Gun, 7.00” Drillable Perforating Gun, 3.375” G-Force Gun System. 2.875” VannGun Assembly fitted with Autolatch Upper Connector 2.875” VannGun Assembly fitted with Autolatch Lower Connector made up from detonating cords, boosters and shaped charges that have been CE-Marked by the GB Explosives Notified Body, UK or INERIS, France and are listed on the EC Type Examination Certificates identified below. Detonating Cords Certificate No. ENB/C/024 issued by GB Explosives Notified Body (UK). Certificate No. ENB/C/021 issued by GB Explosives Notified Body (UK). Certificate No. 0080.EXP.97.0022 issued by INERIS (France). Certificate No. 0080.EXP.97.0023 issued by INERIS (France). Certificate No. 0080.EXP.98.0017 issued by INERIS (France). Certificate No. 0080.EXP.98.0018 issued by INERIS (France). Certificate No. 0080.EXP.98.0019 issued by INERIS (France). Certificate No. 0080.EXP.98.0020 issued by INERIS (France). Boosters Certificate No. 0080.EXP.01.0011 issued by INERIS (France). Certificate No. 0080.EXP.98.0028 issued by INERIS (France). Certificate No. ENB/D/156 issued by GB Explosives Notified Body (UK). Shaped Charges Certificate No. 0080.EXP.01.0032 issued by INERIS (France). Certificate No. ENB/B/040 issued by GB Explosives Notified Body (UK).

ENB09 – Issue 5 – 17/12/99 Page 2 of 2

ENB09 – Issue 5 – 17/12/99 Page 1 of 4




NOTIFIED BODY NO: 0519 CERTIFICATE NO: ENB/B/035/12 Issue 6 1. Product Type: High (Blasting) Explosive. 2. Product Name: RDX OPEN-FACED SHAPED CHARGES as listed in

Annex 1 to this certificate. 3. Manufacturer's Name and Address: Halliburton Energy Services, USA. 4. Applicant's Name and Address: Halliburton Energy Services, USA. 5. Attachments to this Certificate: Annex 1: products covered by this certificate. Being a notified body in accordance with the GB Statutory Instrument No 2714 (1993) and Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses, the Explosives Notified Body certifies that the above type of product has been examined using Module B of the system for attesting conformity and has been found to conform with the manufacturer's specifications for the type and with the relevant requirements of the Statutory Instrument and the Directive. Mr SG Myatt Director, GB Explosives Notified Body 10 December 2012

ENB09 – Issue 5 – 17/12/99 Page 2 of 4



.13317 100000123 PERFORATOR – 4” GSC – BH - RDX

.30472 100000358 PERFORATOR – 1 9/16” SSB lll – RDX

.30517 100000360 PERFORATOR – 4” GSC – 4SPF DP - RDX

.33443 100000396 PERFORATOR – 4” GSC DP – 4SPF - RDX

.34187 100000402 PERFORATOR – 3 3/8” DP GSC - RDX

.34339 100000406 PERFORATOR – 3 1/8” GSC DP - RDX

.40039 100000419 PERFORATOR – 5” DP – 5SPF - RDX

.40379 100000428 PERFORATOR – 3 3/8” DP - RDX

993.53159 100005311 PERFORATOR – 4 5/8” SH – 12 SPF - RDX

993.53281 100005319 PERFORATOR – 4 5/8” OMNI – BH - RDX

993.53296 100005321 PERFORATOR – 3 3/8” BH - RDX

993.53303 100005322 PERFORATOR – 4 5/8” DP – 6SPF - RDX


993.53306 100005325 PERFORATOR – - 4 5/8” OMNI DP/LD – 12 SPF - RDX

993.53307 100005326 PERFORATOR – 4 5/8” OMNI – 12SPF BH/LD - RDX

993.53321 100005328 PERFORATOR – 2 ¾” DP - RDX

993.53341 100005333 PERFORATOR – 3 3/8” DP - RDX

993.53118 100008014 PERFORATOR – 3 3/8” DP - RDX

.4030 100008088 CHG,3 3/8,60 DEG,RDX,BH CHRGS

993.53164 100008251 PERFORATOR – 3 3/8” BH 12 SPF - RDX

.33109 100010810 PERFORATOR – 5” DP GSC - RDX

ENB09 – Issue 5 – 17/12/99 Page 3 of 4


.40255 100010848 PERFORATOR – 3 3/8” GSC DP – RDX

933.53283 100014340 Charge, 4.625” - RDX

995.53504 100014487 CHG,2 IN,SIDEWINDER CHRGS

995.53014 100080386 PERFORATOR – 3 3/8” DP 6SPF - RDX

993.53166 100156990 PERFORATOR – 4 5/8” BH – 18 SPF- RDX

993.53183 100156991 PERFORATOR – 6” BH - RDX

993.53190 100156993 PERFORATOR – 6” DP – 12SPF - RDX

993.53292 100157007 PERFORATOR – 5 1/8” SH – 14SPF - RDX

993.53373 100157026 PERFORATOR – 2 3/4” SUPER DP - RDX

993.53431 100157048 CHG,3 3/8 IN, 12 SPF, RDX,LFD BH CHRGS

995.53000 100158131 PERFORATOR – 4” DP - RDX



995.53018 100158137 Charge – 4” – RDX - BH

995.5302 100158138 PERFORATOR – 4” DP GSC – 4SPF - RDX

995.53022 100158139 PERFORATOR – 5” DP – 5SPF - RDX

995.53030 100158141 PERFORATOR – 3 1/8” DP – RDX (PRIME)

995.56335 100158220 PERFORATOR – 2 3/4” DP – RDX

993.53410 101000801 PERFORATOR – 4 5/8” SH – 12 SPF – LFD - RDX

NA 101007227 PERFORATOR – 7” BH 12 SPF - RDX

993.53445 101203977 CHARGE, 3 1/8”, DP – RDX no jacket

993.53447 101204537 PERFORATOR – 4” DP - RDX

993.53466 101206347 CHARGE – 5 1/8 – 21SPF CLUSTER - BH

ENB09 – Issue 5 – 17/12/99 Page 4 of 4


993.53475 101206793 PERFORATOR – 2 3/4” BH - RDX

NA 101228161 12/14SPF – TWISTLOCK - RDX

NA 101228756 PERFORATOR – 4 5/8” SH – 12SPF - RDX

993.53199 101235817 CHARGE – 5” - RDX - BH

NA 101288857 CHARGE – 4” – RDX, DP, GSC, STD. WASHER, MILLENNIUM

NA 101292616 CHARGE – 5” – 21SPF – CLUSTER – BH - RDX

NA 101293450 CHARGE – 3.375” – 6SPF – RDX – SDP - ZINC

NA 101307494 CHARGE – 5” – 14 SPF – SUPER HOLE – MIRAGE – RDX

NA 101350449 CHARGE, 5”, MAXIM DUEL STRING, RDX 47 GM, RDX

NA 101304878 CHARGE 6.5 “, MIRAGE, RDX, BIG HOLE, LOW DEBRIS, 47 GM

NA 101228037 CHARGE, 7”, MIRAGE, RDX, TWISTLOCK, SUPER HOLE, 39 GM

NA 101213474 CHARGE, 7”, SUPER HOLE, RDX, 56.5 GM

NA 101357518 CHARGE, 5.75”, MAXIM DUEL STRING, RDX, 56.5 GM

NA 102097267 CHARGE, 227, DP, RDX

NA 102045430 CHARGE, MaxForce 210 – FRAC RDX 21 GM

NA 101688614 CHARGE, 5.750”, MIRAGE, BH, RDX, 28 GM

ENB09 – Issue 5 – 17/12/99 Page 1 of 2




NOTIFIED BODY NO: 0519 CERTIFICATE NO: ENB/B/173/12 Issue 6

1. Product Type: High (Blasting) Explosive. 2. Product Name: HMX SEGMENTED CUTTER KITS as listed in Annex 1

to this certificate. 3. Manufacturer's Name and Address: Halliburton Energy Services, USA. 4. Applicant's Name and Address: Halliburton Energy Services, USA. 5. Attachments to this Certificate: Annex 1: products covered by this certificate. Being a notified body in accordance with the GB Statutory Instrument No 2714 (1993) and Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses, the Explosives Notified Body certifies that the above type of product has been examined using Module B of the system for attesting conformity and has been found to conform with the manufacturer's specifications for the type and with the relevant requirements of the Statutory Instrument and the Directive. Dr S G Myatt Director, GB Explosives Notified Body 22 October 2012

ENB09 – Issue 5 – 17/12/99 Page 2 of 2


Part Number

Description Explosive Pellet Kit P/N

Hardware Kit P/N

101978736 3.625 in HMX Segmented Explosives Jet Cutter

101978725 101978712


101978728 101978714


101978728 101978715


101951865 101951914


101951865 101978717


101951865 101978718


101978731 101978720


101978723 101978710


101978722 101978709


101978730 101978719


102160749 101978713



NOTIFIED BODY NO: 0519 CERTIFICATE NO: ENB/B/022/12 Issue 4 1. Product Type: High (Blasting) Explosive. 2. Product Name: PRESSED PELLETS OF HMX as listed in Annex 1 to this certificate. 3. Manufacturer's Name and Address: Halliburton Energy Services, USA. 4. Applicant's Name and Address: Halliburton Energy Services, USA. 5. Attachments to this Certificate: Annex 1: products covered by this certificate. Being a notified body in accordance with the GB Statutory Instrument No 2714 (1993) and Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses, the Explosives Notified Body certifies that the above type of product has been examined using Module B of the system for attesting conformity and has been found to conform with the manufacturer's specifications for the type and with the relevant requirements of the Statutory Instrument and the Directive. Dr SG Myatt Director, GB Explosives Notified Body 2 August 2012

ENB09 – Issue 5 – 17/12/99 Page 1 of 2

ENB09 – Issue 5 – 17/12/99 Page 2 of 2

ANNEX 1 TO EC TYPE EXAMINATION CERTIFICATE ENB/B/022/12 Issue 4 Pellet, 1 3/8" - 400 Degrees F, Part Nos. S274-17 & 100118418 Pellet, 1 3/4" - 400 Degrees F, Part Nos. S267-22 & 100015145 Pellet, 2" - 400 Degrees F, Part Nos. S282-22 & 100118425 Pellet, 2 5/8" - 400 Degrees F, Part Nos. S269-13 & 100118428 Pellet, Booster, HMX (LX-10), 1.390” Diameter, Part Nos. S267-22 & 101290951 Pellet, HMX (LX-10), Super Cutter, 0.998” Diameter, Part Nos. D1185 & 101290915 Pellet, 2 5/8” DCST with 1 3/8” MDF, 400 Degrees F, Part No. 101293160. Pellet, Booster, HMX, 0.735” Diameter, Kit 101319985 (2 off 101289385) and Kit 101319983 (20 off 101289385)



NOTIFIED BODY NO: 0519 CERTIFICATE NO: ENB/B/053/007 Issue 6 1. Product Type: High (Blasting) Explosive. 2. Product Name: RDX PERFORATING GUN SYSTEMS as listed in Annex 1 to

this certificate. 3. Manufacturer's Name: (1) Halliburton Manufacturing and Services Ltd, United

Kingdom and (2) Halliburton B.V., The Netherlands. 4. Applicant's Name: Halliburton Manufacturing and Services Ltd, United

Kingdom. 5. Attachments to this Certificate: Annex 1: products covered by this certificate. Being a notified body in accordance with the GB Statutory Instrument No 2714 (1993) and Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses, the Explosives Notified Body certifies that the above type of product has been examined using Module B of the system for attesting conformity and has been found to conform with the manufacturer's specifications for the type and with the relevant requirements of the Statutory Instrument and the Directive. Dr R K Wharton Director, GB Explosives Notified Body 14 September 2007

ENB09 – Issue 5 – 17/12/99 Page 1 of 3

ANNEX 1 TO EC TYPE EXAMINATION CERTIFICATE ENB/B/053/007 Issue 6 1.563” VannGun Assembly, 2.00” VannGun Assembly, 2.50” VannGun Assembly, 2.75” VannGun Assembly, 2.875” VannGun Assembly, 3.375” VannGun Assembly, 3.50” VannGun Assembly, 4.00” VannGun Assembly, 4.625” VannGun Assembly, 5.00” VannGun Assembly, 5.125” VannGun Assembly, 5.75” VannGun Assembly, 6.50” VannGun Assembly, 7.00” VannGun Assembly, 4.00” Drillable Perforating Gun, 7.00” Drillable Perforating Gun, 3.375” G-Force Gun System. made up from detonating cords, boosters and shaped charges that have been CE-Marked by the GB Explosives Notified Body, UK or INERIS, France and are listed on the EC Type Examination Certificates identified below. Detonating Cords Certificate No. ENB/C/024 issued by GB Explosives Notified Body (UK). Certificate No. ENB/C/021 issued by GB Explosives Notified Body (UK). Certificate No. 0080.EXP.97.0022 issued by INERIS (France). Certificate No. 0080.EXP.97.0023 issued by INERIS (France). Certificate No. 0080.EXP.98.0017 issued by INERIS (France). Certificate No. 0080.EXP.98.0018 issued by INERIS (France). Certificate No. 0080.EXP.98.0019 issued by INERIS (France). Certificate No. 0080.EXP.98.0020 issued by INERIS (France). Boosters Certificate No. 0080.EXP.98.0027 issued by INERIS (France). Certificate No. 0080.EXP.98.0028 issued by INERIS (France). Certificate No. 0080.EXP.98.0029 issued by INERIS (France). Certificate No. 0080.EXP.98.0030 issued by INERIS (France). Certificate No. 0080.EXP.98.0031 issued by INERIS (France). Certificate No. 0080.EXP.01.0011 issued by INERIS (France).

ENB09 – Issue 5 – 17/12/99 Page 2 of 3

Shaped Charges Certificate No. 0080.EXP.98.0034 issued by INERIS (France). Certificate No. 0080.EXP.98.0034-C1 issued by INERIS (France). Certificate No. 0080.EXP.98.0035 issued by INERIS (France). Certificate No. 0080.EXP.98.0035-C1 issued by INERIS (France). Certificate No. 0080.EXP.98.0036 issued by INERIS (France). Certificate No. 0080.EXP.98.0036-C1 issued by INERIS (France). Certificate No. 0080.EXP.98.0037 issued by INERIS (France). Certificate No. 0080.EXP.98.0037-C1 issued by INERIS (France). Certificate No. 0080.EXP.98.0038 issued by INERIS (France). Certificate No. 0080.EXP.98.0038-C1 issued by INERIS (France). Certificate No. 0080.EXP.98.0039 issued by INERIS (France). Certificate No. 0080.EXP.98.0039-C1 issued by INERIS (France). Certificate No. 0080.EXP.98.0040 issued by INERIS (France). Certificate No. 0080.EXP.98.0040-C1 issued by INERIS (France). Certificate No. 0080.EXP.98.0041 issued by INERIS (France). Certificate No. 0080.EXP.98.0041-C1 issued by INERIS (France). Certificate No. 0080.EXP.98.0041-C2 issued by INERIS (France). Certificate No. 0080.EXP.98.0042 issued by INERIS (France). Certificate No. 0080.EXP.98.0042-C1 issued by INERIS (France). Certificate No. 0080.EXP.01.0028 issued by INERIS (France). Certificate No. 0080.EXP.01.0029 issued by INERIS (France). Certificate No. 0080.EXP.01.0032 issued by INERIS (France). Certificate No. ENB/B/035 issued by GB Explosives Notified Body (UK).

ENB09 – Issue 5 – 17/12/99 Page 3 of 3



NOTIFIED BODY NO: 0519 CERTIFICATE NO: ENB/B/054/008 Issue 11 1. Product Type: High (Blasting) Explosive. 2. Product Name: HMX PERFORATING GUN SYSTEMS as listed in Annex 1 to

this certificate. 3. Manufacturer's Name: (1) Halliburton Manufacturing and Services Ltd, United Kingdom and (2) Halliburton B.V., The Netherlands. 4. Applicant's Name: Halliburton Manufacturing and Services Ltd, United

Kingdom. 5. Attachments to this Certificate: Annex 1: products covered by this certificate. Being a notified body in accordance with the GB Statutory Instrument No 2714 (1993) and Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses, the Explosives Notified Body certifies that the above type of product has been examined using Module B of the system for attesting conformity and has been found to conform with the manufacturer's specifications for the type and with the relevant requirements of the Statutory Instrument and the Directive. Dr R K Wharton Director, GB Explosives Notified Body 16 May 2008

ENB09 – Issue 5 – 17/12/99 Page 1 of 3

ANNEX 1 TO EC TYPE EXAMINATION CERTIFICATE ENB/B/054/008 Issue 11 1.563” VannGun Assembly, 1.750” JRC Gun System, 2.00” VannGun Assembly, 2.50” VannGun Assembly, 2.75” VannGun Assembly, 2.875” VannGun Assembly, 2.875” ‘Triplejet’ VannGun Assembly, 3.375” VannGun Assembly, 3.50” VannGun Assembly, 4.00” VannGun Assembly, 4.625” VannGun Assembly, 5.00” VannGun Assembly, 5.125” VannGun Assembly, 5.75” VannGun Assembly, 6.50” VannGun Assembly, 7.00” VannGun Assembly, 4.00” Drillable Perforating Gun, 7.00” Drillable Perforating Gun, 3.375” G-Force Gun System, 3.125” JRC Gun. made up from detonating cords, boosters and shaped charges that have been CE-Marked by the GB Explosives Notified Body, UK or INERIS, France and are listed on the EC Type Examination Certificates identified below. Detonating Cords Certificate No. ENB/C/024 issued by GB Explosives Notified Body (UK). Certificate No. ENB/C/021 issued by GB Explosives Notified Body (UK). Certificate No. 0080.EXP.97.0022 issued by INERIS (France). Certificate No. 0080.EXP.97.0023 issued by INERIS (France). Certificate No. 0080.EXP.98.0017 issued by INERIS (France). Certificate No. 0080.EXP.98.0018 issued by INERIS (France). Certificate No. 0080.EXP.98.0019 issued by INERIS (France). Certificate No. 0080.EXP.98.0020 issued by INERIS (France). Boosters Certificate No. 0080.EXP.98.0027 issued by INERIS (France). Certificate No. 0080.EXP.98.0028 issued by INERIS (France). Certificate No. 0080.EXP.98.0029 issued by INERIS (France). Certificate No. 0080.EXP.98.0030 issued by INERIS (France). Certificate No. 0080.EXP.98.0031 issued by INERIS (France). Certificate No. 0080.EXP.01.0011 issued by INERIS (France).

ENB09 – Issue 5 – 17/12/99 Page 2 of 3

Shaped Charges Certificate No. 0080.EXP.98.0032 issued by INERIS (France). Certificate No. 0080.EXP.98.0033 issued by INERIS (France). Certificate No. 0080.EXP.98.0034 issued by INERIS (France). Certificate No. 0080.EXP.98.0034-C1 issued by INERIS (France). Certificate No. 0080.EXP.98.0035 issued by INERIS (France). Certificate No. 0080.EXP.98.0035-C1 issued by INERIS (France). Certificate No. 0080.EXP.98.0036 issued by INERIS (France). Certificate No. 0080.EXP.98.0036-C1 issued by INERIS (France). Certificate No. 0080.EXP.98.0037 issued by INERIS (France). Certificate No. 0080.EXP.98.0037-C1 issued by INERIS (France). Certificate No. 0080.EXP.98.0038 issued by INERIS (France). Certificate No. 0080.EXP.98.0038-C1 issued by INERIS (France). Certificate No. 0080.EXP.98.0039 issued by INERIS (France). Certificate No. 0080.EXP.98.0039-C1 issued by INERIS (France). Certificate No. 0080.EXP.98.0040 issued by INERIS (France). Certificate No. 0080.EXP.98.0040-C1 issued by INERIS (France). Certificate No. 0080.EXP.98.0041 issued by INERIS (France). Certificate No. 0080.EXP.98.0041-C1 issued by INERIS (France). Certificate No. 0080.EXP.98.0041-C2 issued by INERIS (France). Certificate No. 0080.EXP.98.0042 issued by INERIS (France). Certificate No. 0080.EXP.98.0042-C1 issued by INERIS (France). Certificate No. 0080.EXP.01.0028 issued by INERIS (France). Certificate No. 0080.EXP.01.0029 issued by INERIS (France). Certificate No. 0080.EXP.01.0030 issued by INERIS (France). Certificate No. 0080.EXP.01.0031 issued by INERIS (France). Certificate No. 0080.EXP.01.0032 issued by INERIS (France). Certificate No. ENB/B/036 issued by GB Explosives Notified Body (UK).

ENB09 – Issue 5 – 17/12/99 Page 3 of 3



NOTIFIED BODY NO: 0519 CERTIFICATE NO: ENB/B/131/010 Issue 3 1. Product Type: High (Blasting) Explosive. 2. Product Name: CARTRIDGED EMULSION EXPLOSIVES as listed in Annex 1 to this certificate. 3. Manufacturer's Name: Irish Industrial Explosives Ltd. 4. Applicant's Name: Irish Industrial Explosives Ltd. 5. Attachments to this Certificate: Annex 1: products covered by this certificate. Being a notified body in accordance with the GB Statutory Instrument No 2714 (1993) and Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses, the Explosives Notified Body certifies that the above type of product has been examined using Module B of the system for attesting conformity and has been found to conform with the manufacturer's specifications for the type and with the relevant requirements of the Statutory Instrument and the Directive. Mr P Shelley Director, GB Explosives Notified Body 25 January 2010

ENB09 – Issue 5 – 17/12/99 Page 1 of 2

ANNEX 1 TO EC TYPE EXAMINATION CERTIFICATE ENB/B/131/010 Issue 3 Emugel 1 Emugel 2 also known as Emugel 400. Emugel 500.

ENB09 – Issue 5 – 17/12/99 Page 2 of 2

ENB09 – Issue 5 – 17/12/99 Page 1 of 2




NOTIFIED BODY NO: 0519 CERTIFICATE NO: ENB/B/063/12 Issue 4 1. Product Type: High (Blasting) Explosive. 2. Product Name: AMMONIUM NITRATE / FUEL OIL EXPLOSIVES as listed in Annex 1 to this certificate. 3. Manufacturer's Name and Address: (1) Irish Industrial Explosives Ltd,

Ireland (2) EPC UNITED KINGDOM PLC, United Kingdom. 4. Applicant's Name and Address: Irish Industrial Explosives Ltd, Ireland . 5. Attachments to this Certificate: Annex 1: products covered by this certificate. Being a notified body in accordance with the GB Statutory Instrument No 2714 (1993) and Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses, the Explosives Notified Body certifies that the above type of product has been examined using Module B of the system for attesting conformity and has been found to conform with the manufacturer's specifications for the type and with the relevant requirements of the Statutory Instrument and the Directive. Dr SG Myatt Director, GB Explosives Notified Body 11 December 2012

ENB09 – Issue 5 – 17/12/99 Page 2 of 2

ANNEX 1 TO EC TYPE EXAMINATION CERTIFICATE ENB/B/063/12 Issue 4 Irish Industrial Explosives Ltd Ammogex EPC UNITED KINGDOM PLC Ammoblast Ammospex



NOTIFIED BODY NO: 0519 CERTIFICATE NO: ENB/B/133/008 Issue 1 1. Product Type: High (Blasting) Explosive. 2. Product Name: UNDERGROUND BULK EMULSION EXPLOSIVES as listed in

Annex 1 to this certificate. 3. Manufacturer's Name: Irish Industrial Explosives Ltd, Ireland. (See also Annex

1 to this Certificate). 4. Applicant's Name: Mining Explosives Ltd, UK. 5. Attachments to this Certificate: Annex 1: products covered by this certificate. Being a notified body in accordance with the GB Statutory Instrument No 2714 (1993) and Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses, the Explosives Notified Body certifies that the above type of product has been examined using Module B of the system for attesting conformity and has been found to conform with the manufacturer's specifications for the type and with the relevant requirements of the Statutory Instrument and the Directive. Dr R K Wharton Director, GB Explosives Notified Body 14 February 2008

ENB09 – Issue 5 – 17/12/99 Page 1 of 2

ANNEX 1 TO EC TYPE EXAMINATION CERTIFICATE ENB/B/133/008 Issue 1 RS100D R100G Note: The emulsions and gassing solutions used to manufacture these explosives are made by Exchem Explosives, UK for Mining Explosives Ltd.

ENB09 – Issue 5 – 17/12/99 Page 2 of 2



NOTIFIED BODY NO: 0519 CERTIFICATE NO: ENB/B/096/005 Issue 1 1. Product Type: High (Blasting) Explosive. 2. Product Name: EXPLOSIVE ACTUATORS as listed in Annex 1 to this

certificate. 3. Manufacturer's Name: Kidde-Fenwal Inc, USA. 4. Applicant's Name: Kidde-Fenwal Inc, USA. 5. Attachments to this Certificate: Annex 1: products covered by this certificate. Being a notified body in accordance with the GB Statutory Instrument No 2714 (1993) and Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses, the Explosives Notified Body certifies that the above type of product has been examined using Module B of the system for attesting conformity and has been found to conform with the manufacturer's specifications for the type and with the relevant requirements of the Statutory Instrument and the Directive. Dr R K Wharton Director, GB Explosives Notified Body 5 April 2005

ENB09 – Issue 5 – 17/12/99 Page 1 of 2

ANNEX 1 TO EC TYPE EXAMINATION CERTIFICATE ENB/B/096/005 Issue 1 Explosive Actuator Part No. 32-099932-008 Explosive Actuator Part No. 32-099932-010 Explosive Actuator Part No. 32-099932-101

ENB09 – Issue 5 – 17/12/99 Page 2 of 2



NOTIFIED BODY NO: 0519 CERTIFICATE NO: ENB/B/078/003 Issue 1 1. Product Type: High (Blasting) Explosive. 2. Product Name: LINEAR CUTTING CHARGE as listed in Annex 1 to this

certificate. 3. Manufacturer's Name: Kidde Graviner Ltd, United Kingdom. 4. Applicant's Name: Kidde Graviner Ltd, United Kingdom. 5. Attachments to this Certificate: Annex 1: products covered by this certificate. Being a notified body in accordance with the GB Statutory Instrument No 2714 (1993) and Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses, the Explosives Notified Body certifies that the above type of product has been examined using Module B of the system for attesting conformity and has been found to conform with the manufacturer's specifications for the type and with the relevant requirements of the Statutory Instrument and the Directive. Dr R K Wharton Director, GB Explosives Notified Body 14 August 2003

ENB09 – Issue 5 – 17/12/99 Page 1 of 2

ANNEX 1 TO EC TYPE EXAMINATION CERTIFICATE ENB/B/078/003 Issue 1 3” Linear Cutting Charge, Part No. 47581-001

ENB09 – Issue 5 – 17/12/99 Page 2 of 2

ENB09 – Issue 5 – 17/12/99 Page 1 of 2




NOTIFIED BODY NO: 0519 CERTIFICATE NO: ENB/B/161/13 Issue 1 1. Product Type: High (Blasting) Explosive. 2. Product Name: BI-DIRECTIONAL BOOSTER as listed in Annex 1 to this

certificate. 3. Manufacturer's Name and Address: Legacy Oil Tools, USA

4. Applicant's Name and Address: Legacy Oil Tools, USA

5. Attachments to this Certificate: Annex 1: products covered by this certificate. Being a notified body in accordance with the GB Statutory Instrument No 2714 (1993) and Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses, the Explosives Notified Body certifies that the above type of product has been examined using Module B of the system for attesting conformity and has been found to conform with the manufacturer's specifications for the type and with the relevant requirements of the Statutory Instrument and the Directive. Dr SG Myatt Director, GB Explosives Notified Body 14 January 2013

ENB09 – Issue 5 – 17/12/99 Page 2 of 2

ANNEX 1 TO EC TYPE EXAMINATION CERTIFICATE ENB/B/161/13 Issue 1 DT-BIDI-400 Bi-Directional Booster- HMX.



NOTIFIED BODY NO: 0519 CERTIFICATE NO: ENB/B/102/008 Issue 2 1. Product Type: High (Blasting) Explosive. 2. Product Name: BLACK POWDER EXPLOSIVES as listed in Annex 1 to this

certificate. 3. Manufacturer's Name: MKE BARUTSAN, Turkey. 4. Applicant's Name: MKE BARUTSAN, Turkey. 5. Attachments to this Certificate: Annex 1: products covered by this certificate. Being a notified body in accordance with the GB Statutory Instrument No 2714 (1993) and Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses, the Explosives Notified Body certifies that the above type of product has been examined using Module B of the system for attesting conformity and has been found to conform with the manufacturer's specifications for the type and with the relevant requirements of the Statutory Instrument and the Directive. Dr R K Wharton Director, GB Explosives Notified Body 2 June 2008

ENB09 – Issue 5 – 17/12/99 Page 1 of 2

ANNEX 1 TO EC TYPE EXAMINATION CERTIFICATE ENB/B/102/008 Issue 2 Black Gun Powder Composition A Black Gun Powder Composition B Mining Black Powder Composition A Mining Black Powder Composition B

ENB09 – Issue 5 – 17/12/99 Page 2 of 2



NOTIFIED BODY NO: 0519 CERTIFICATE NO: ENB/B/103/008 Issue 2 1. Product Type: High (Blasting) Explosive. 2. Product Name: DYNAMITES as listed in Annex 1 to this certificate. 3. Manufacturer's Name: MKE BARUTSAN, Turkey. 4. Applicant's Name: MKE BARUTSAN, Turkey. 5. Attachments to this Certificate: Annex 1: products covered by this certificate. Being a notified body in accordance with the GB Statutory Instrument No 2714 (1993) and Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses, the Explosives Notified Body certifies that the above type of product has been examined using Module B of the system for attesting conformity and has been found to conform with the manufacturer's specifications for the type and with the relevant requirements of the Statutory Instrument and the Directive. Dr R K Wharton Director, GB Explosives Notified Body 2 June 2008

ENB09 – Issue 5 – 17/12/99 Page 1 of 2

ANNEX 1 TO EC TYPE EXAMINATION CERTIFICATE ENB/B/103/008 Issue 2 Gelatin Dynamite Permissible Dynamite GOM II-A1 Dynamite Seismic Dynamite ELBAR-1 Dynamite

ENB09 – Issue 5 – 17/12/99 Page 2 of 2



NOTIFIED BODY NO: 0519 CERTIFICATE NO: ENB/B/105/008 Issue 2 1. Product Type: High (Blasting) Explosive. 2. Product Name: ANFO-TYPE POWDER EXPLOSIVES as listed in Annex 1 to

this certificate. 3. Manufacturer's Name: MKE BARUTSAN,Turkey. 4. Applicant's Name: MKE BARUTSAN,Turkey. 5. Attachments to this Certificate: Annex 1: products covered by this certificate. Being a notified body in accordance with the GB Statutory Instrument No 2714 (1993) and Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses, the Explosives Notified Body certifies that the above type of product has been examined using Module B of the system for attesting conformity and has been found to conform with the manufacturer's specifications for the type and with the relevant requirements of the Statutory Instrument and the Directive. Dr R K Wharton Director, GB Explosives Notified Body 2 June 2008

ENB09 – Issue 5 – 17/12/99 Page 1 of 2

ANNEX 1 TO EC TYPE EXAMINATION CERTIFICATE ENB/B/105/008 Issue 2 BARANFO ELBAR-5 ELBAR-100

ENB09 – Issue 5 – 17/12/99 Page 2 of 2

ENB Certificate - EC Type Examination - HSL€¦ · examined using Module B of the system for...

Documents

Transcript of ENB Certificate - EC Type Examination - HSL€¦ · examined using Module B of the system for...