EN - neuson-forest.at · Engine John Deere 4045 Performance 77 kW / 105 hp Crane Crane Type Neuson...
Transcript of EN - neuson-forest.at · Engine John Deere 4045 Performance 77 kW / 105 hp Crane Crane Type Neuson...
Neuson Forest GmbHGaisbergerstraße 52a4030 Linz/ Austria
Tel.: +43 / (0)732/ 239 400 - 503Fax: +43 / (0)732/ 239 400 - 502email: off [email protected]
EN 0
7/20
18
M
OREG
RAPH
ICS
facebook.com/Neuson.Forest
FIND US ON FACEBOOK:
25 Y
EARS
OF
FORE
STRY
WO
RK
EN
103 HV 8 103 HVT 10
12104 HV 104 HVT 14
164 HVT 16 183 HVT 20
243 HV 22 243 HVT 24
Technical and measurement changes as well as misprints in graphic or writing.
LEVELING SYSTEMPage 4 & 5
SERVICEPage 17 & 18 Page 25 & 26
CHAIN
Harvester head and measuring system to customer specification!
TILT BY NEUSON
All Machines from the Typ HVT are equipped with the tried and tested upper carriage levelling system.
A slope compensator that can be tilted 25° forward and +/- 15° laterally facilitates efficient work in steep, rugged terrain.
7 8
HARVESTER 103HV
Measurements Transport Position ( hxwxl )
3080 x 2150 x 7700 mm121,3“ x 84,6“ x 303,1“
Traction Chassis 91,5 kN / 20.570 lbs
Chassis and Slewing Gear
Track Lenght 3350 mm / 131,9“
Swing Torque 14,6 kNm / 10.768 lbf ft
Ground Clearance 425 mm / 16,7“
Ground Pressure 0,36 kg/cm² / 5,1 lbf/in²
Engine Data
Engine John Deere 4045
Performance 77 kW / 105 hp
Crane
Crane Type Neuson Forst Crane
Reach 9,3 m / 366,1“
Hydraulic System
Hoisting Performance 2x104 l/min + 47 l/min + 26 l/min2x 27,5 gpm + 12,5 gpm + 6,9 gpm
Operating Pressure 300 bar / 4351 psi
OIL TANKBHDWEIGHT
12 t26.500 lbs
45 cm17,7“
140 l37 gal
170 l45 gal
103 HVTracked Harvester
9 10
HARVESTER 103HVT
Measurements Transport Position ( hxwxl )
3380 x 2550 x 7700 mm133,1“ x 100,4“ x 303,1“
Traction Chassis 145 kN / 32.597 lbs
Chassis and Slewing Gear
Track Lenght 3370 mm / 132”
Swing Torque 14,6 kNm / 10.768 lbf ft
Ground Clearance 520 mm / 20,5“
Ground Pressure 0,40 kg/cm² / 5,7 lbf/in²
Engine Data
Engine John Deere 4045
Performance 77 kW / 105 hp
Crane
Crane Type Neuson Forst Crane
Reach 9,3 m / 366”
Hydraulic System
Hoisting Performance 2x104 l/min + 47 l/min + 26 l/min2x 27,5 gpm + 12,5 gpm + 6,9 gpm
Operating Pressure 300bar / 4351 psi
WEIGHT BHD OIL TANKTILT
190 l50 gal
140 l37 gal
25° / 15°25° / 15°
45 cm17,7“
13,5 t29.800 lbs
103 HVTTracked Harvester
11 12
HARVESTER 104HV
Measurements Transport Position ( hxwxl )
3080 x 2100 x 7700 mm121,3“ x 84,6“ x 303,1“
Traction Chassis 91,5 kN / 20.570 lbs
Chassis and Slewing Gear
Track Lenght 3350 mm / 131,9“
Swing Torque 19,5 kNm / 14.382 lbf ft
Ground Clearance 425 mm / 16,7“
Ground Pressure 0,37 kg/cm² / 5,3 lbf/in²
Engine Data
Engine John Deere 4045
Performance 86 kW / 117 hp
Crane
Crane Type Neuson Forst Crane
Reach 9,3 m / 366,1“
Hydraulic System
Hoisting Performance 2x104 l/min + 47 l/min + 26 l/min2x 27,5 gpm + 12,5 gpm + 6,9 gpm
Operating Pressure 300 bar / 4351 psi
OIL TANKBHDWEIGHT
170 l52 gal
140 l37 gal
45 cm17,7“
12,3 t27.100 lbs
104 HVTracked Harvester
13 14
HARVESTER 104HVT
Measurements Transport Position ( hxwxl )
3400 x 2500 x 7700 mm133,9“ x 100,4“ x 303,1“
Traction Chassis 123,5 kN / 27.764 lbs
Chassis and Slewing Gear
Track Lenght 3460 mm / 136,2“
Swing Torque 19,5 kNm / 14.382 lbf ft
Ground Clearance 520 mm / 20,5“
Ground Pressure 0,40 kg/cm² / 5,7 lbf/in²
Engine Data
Engine John Deere 4045
Performance 86 kW / 117 hp
Crane
Crane Type Neuson Forst Crane
Reach 9,3 m / 366,1“
Hydraulic System
Hoisting Performance 2x104 l/min + 47 l/min + 26 l/min2x 27,5 gpm + 12,5 gpm + 6,9 gpm
Operating Pressure 300 bar / 4351 psi
WEIGHT BHD OIL TANKTILT
45 cm17,7“
140 l37 gal
200 l52 gal
104 HVTTracked Harvester
25° / 15°25° / 15°
14 t30.900 lbs
15 16
HARVESTER 164HVT
Measurements Transport Position ( hxwxl )
3200 x 2500 x 7700 mm126“ x 100,4“ x 303,1“
Traction Chassis 174 kN / 39.117 lbs
Chassis and Slewing Gear
Track Lenght 3700 mm / 145,7“
Swing Torque 35,4 kNm / 26.110 lbf ft
Ground Clearance 520 mm / 20,5“
Ground Pressure 0,40 kg/cm² / 5,7 lbf/in²
Engine Data
Engine John Deere 6068
Performance 129 kW / 175 hp
Crane
Crane Type Parallel Crane
Reach 10,1 m / 397,6“
Hydraulic System
Hoisting Performance 2 x 344 l/min2 x 90,9 gpm
Operating Pressure 300 bar / 4351 psi
WEIGHT BHD OIL TANKTILT
164 HVTTracked Harvester
16,5 t36.400 lbs
55 cm21,7“
250 l66 gal
265 l70 gal
25° / 15°25° / 15°
The Neuson Forest name guarantees technical expertise, mastery of complex hydraulic processes under the most difficult conditions and perfect service. With more than 25 years of experience we have made our machines into one of the highest performing and most cost-effective solutions for fully mechanised wood harvesting.
OUR MACHINES ARE WORKING SUCCESSFULLY IN ALL CONTINENTS.
19 20
HARVESTER 183HVT
Measurements Transport Position ( hxwxl )
3500 x 2550 x 8000 mm137,8 x 100,4 x 315
Traction Chassis 230 kN / 51.706 lbs
Chassis and Slewing Gear
Track Lenght 4045 mm / 159,3“
Swing Torque 43,6 kNm / 32.158 lbf ft
Ground Clearance 590 mm / 23,2”
Ground Pressure 0,42 kg/cm² / 6 lbf/in²
Engine Data
Engine John Deere 6068
Performance 132 kW / 180 hp
Crane
Crane Type Parallel Crane CH175
Reach 10,2 m/ 12,5m / 401,6“/ 492,1“
Hydraulic System
Hoisting Performance 2 x 331 l/min2 x 87,4 gpm
Operating Pressure 300 bar / 4351 psi
WEIGHT BHD OIL TANKTILT
300 l + 100 l79 gal + 26 gal
220 l58 gal
20,5 t45.200 lbs
183 HVTTracked Harvester
25° / 15°25° / 15°
65 cm25,6“
21 22
HARVESTER 243HV
Measurements Transport Position ( hxwxl )
3550 x 2950 x 9200 mm139,8“ x 116,2“ x 362,2“
Traction Chassis 272 kN / 61.148 lbs
Chassis and Slewing Gear
Track Lenght 4420 mm / 174”
Swing Torque 64 kNm / 47.204 lbf ft
Ground Clearance 760 mm / 29,9“
Ground Pressure 0,46 kg/cm² / 6,5 lbf/in²
Engine Data
Engine John Deere 6068
Performance 184 kW / 250 hp
Crane
Crane Type Parallel Crane
Reach 9,1 m/ 10,2 m/ 14,2 m 358,3“/ 401,6“/ 559“
Hydraulic System
Hoisting Performance 331 l/min + 389 l/min87,4 gpm + 102,8 gpm
Operating Pressure 330 bar / 4786 psi
OIL TANKBHDWEIGHT
700 l185 gal
390 l103 gal
243 HVTracked Harvester
75 cm29,5“
23,2 t51.100 lbs
23 24
HARVESTER 243HVT
Measurements Transport Position ( hxwxl )
3600 x 2950 x 9200 mm141,7“ x 116,1“ x 362,2“
Traction Chassis 272 kN / 61.148 lbs
Chassis and Slewing Gear
Track Lenght 4420 mm / 174“
Swing Torque 64 kNm / 47.204 lbf ft
Ground Clearance 760 mm / 29,9“
Ground Pressure 0,46 kg/cm² / 6,5 lbf/in²
Engine Data
Engine John Deere 6068
Performance 184 kW / 250 hp
Crane
Crane Type Parallel Crane
Reach 9,1 m/ 10,2 m/ 14,2 m 358,3“/ 401,6“/ 559“
Hydraulic System
Hoisting Performance 331 l/min + 389 l/min87,4 gpm + 102,8 gpmm
Operating Pressure 330 bar / 4786 psi
WEIGHT BHD OIL TANKTILT
650 l172 gal
390 l103 gal
24,7 t54.500 lbs
243 HVTTracked Harvester
25° / 15°25° / 15°
75 cm29,5“
SERVICE BY NEUSON
The well-known service friendli-ness is given on all machines by tiltable cabs and roomly designed service platforms. By all machine types the cabin and the platform can be hydraulically swiveled. Due to the good space available and the clear arrangement of all components, service works can be done ergonomically, quickly and safely. The safe ascent takes place with the help of a suspen-ded ladder.
Perfect for steep slope processing1-rib tracks
Available from 500 - 600 mm
The universal chain2-rib tracksAvailable from 500 - 750 mm
Realy ground protecting version3- rib tracks with curved Shoe espe- cially for wet groundAvailable from 500 - 800 mm
For operations on the streetRubber TracksAvailable from 500 - 600 mm
Send an e-mail: [email protected] Our website: www.neuson-forest.com