Emulsifiers for the Polymers Industry ” By Ekaterina Merzlikina, Technical Sales Manager, Polymers...
-
Upload
ann-hutchinson -
Category
Documents
-
view
215 -
download
0
Transcript of Emulsifiers for the Polymers Industry ” By Ekaterina Merzlikina, Technical Sales Manager, Polymers...
Emulsifiers for the Polymers Industry
”
By Ekaterina Merzlikina, Technical Sales Manager, Polymers Industry
2
Palsgaard’s solutions for the Polymers Industry
Antifogging agents
prevent the formation of water droplets on the surface of food packaging and agricultural film
applications
Antistatic agents
dissipat the electric charges, avoiding dust attraction on the surface packaging
3
Fogging of food plastics packaging
Fogging is formation of small discrete droplets of water from vapor on the surface of plastic films of other plastics
packaging
Reasons of the fogging?
In food packaging fogging occurs as a result of drop in temperature when food and other products with a high content of
moist are packed in a closed system and stored in cold places
4
Antifogging solutions
Fogging problems can be avoided if an antifogging agent is used for
production of food plastics packaging and agricultural films
Antifogging agents have the same chemical structure as emulsifiers and
lubricate the water on the surface, preventing the creation of water
droplets on the surface
They work by migrating from polyethylene to the surface of the
packaging and make the surface more hydrophilic
As a result, the water droplets settled on the surface will spread on the
packaging surface, making the fog inside disappear and the packaging
become clear
5
Antifogging agents
Palsgaard® A-F DMG HO
short term antifogging performance effective at low in dosage (0.6%) recommended for food wrap films
Chemical composition:Distilled monoglycerides is based on sunflower
Physical form at 25 C:Paste form
Palsgaard® A-F PGE HO
Short and long term antifogging performance (up to 18 months) effective at low in dosage (0.4%) recommended for food and agricultural films
Chemical composition:Polyglycerol esters is produced by esterification of polyglycerols
with vegetable-based fatty acids. Physical form at 25 C:Liquid form
6
Performance test of Palsgaard® A-F DMG HO
Performance test was done by NORNER, Independent Industrial Polymer Institute from Norway.
Cold Fog Testing: 100 ml of tap water at 20°C were filled into 300ml glass beakers and covered with samples of the films. The beakers were placed at refrigerated conditions (4°C) for three hours. The appearance of the films were observed at regular intervals Compared with a well-recognised agent (distilled monoglyceride; unsaturated fatty acids)
Conclusion: Palsgaard® A-F DMG HO show better short term antifogging properties in LDPE film compared with same concentration of the monoglyceride reference.
7
Performance test of Palsgaard® A-F PGE HO
Performance test was done by NORNER, Independent Industrial Polymer Institute from Norway
Cold Fog Testing: 100 ml of tap water at 20°C were filled into 300ml glass beakers and covered with samples of the films. The beakers were placed at refrigerated conditions (4°C) for three hours. The appearance of the films were observed at regular intervals Compared with a well-recognised agent (distilled monoglyceride; unsaturated fatty acids)
Conclusion:
Palsgaard A-F PGE HO have the needed properties to be a efficient long term antifogging agent for greenhouse applications based on cold fog test until 18 months after LDPE film production.
8
Static problems
Electrical properties of plastics
Due to their chemical constitution, most plastic types are very good electrical insulation materials. Because of this many
plastics are used as insulating materials in the electronics industry.
The high electrical resistivity however, leads to an undesired property, namely that the material is prone to accumulating
electrostatic charges. Plastic materials create static electricity.
Negative aspects of static electricity in plastics Processing problem such as difficulty of film blowing, stacking of plastic packaging Handling problem during packaging, transport, storage and packaging Electrical discharge which may give electrical shocks to employees Safety risks - start a fire or cause an explosion Dust pick up, which
can ruin clarity and/or the sales appeal of items packages in plastic packaging can create difficulties for further packaging operation, such as self-adhesive and/or shrink labeling
Antistatic agents helps to overcome the problems which arise due to static electricity.
9
Antistatic agents
Palsgaard® A-S DMG P powder / pellets forms
Short term and long term high effective antistatic performance Effective at low in dosage (0.6%) Distilled monoglycerides based on vegetable oil, contain about 90% of
monoglyceride Palsgaard® A-S MDG 65 P powder/ pellets forms
Short term antistatic performance Effective at low dosage (0.6%) Mono- and diglyceride based on vegetable oil, contain about 60% of
monoglyceride Palsgaard® A-S DMG RP pellets form
Long term high effective antistatic performance Effective at low in dosage (0.6%) Distilled monoglyceride based on vegetable oil, contain about 90% of
monoglyceride
10
Performance test of Palsgaard® A-F PGE HO
Performance test was done by NORNER, Independent Industrial Polymer Institute from Norway
Static Decay time measured by Static Decay Meter Model 406D (ets)The samples were charged to ±5kV and the time to dissipate 90% of the charge was measuredComparative study with a well-recognised reference GMS 90 (GMS90-REF)
Conclusion:
Palsgaard® A-S DMG P shows improved short terms antistatic properties in compared with the concentration of the reference GMS90, as analysed for within 1 week after sample Injection moulding
Palsgaard® A-S DMG P shows as good long terms antistatic performance as reference until 22 weeks after injection moulding
11
Performance test of Palsgaard® A-S DMG 65 P
Performance test was done by NORNER, Independent Industrial Polymer Institute from Norway
Static Decay time measured by Static Decay Meter Model 406D (ets)The samples were charged to ±5kV and the time to dissipate 90% of the charge was measuredComparative study with a well-recognised reference GMS 60 (GMS60-REF)
Conclusion:
Palsgaard® A-S MDG 65P show as good antistatic performance in PP homopolymer compared with same concentration of the reference GMS 60, as analysed until 22 weeks after injection moulding
12
Performance test of Palsgaard® A-S DMG RP
Performance test was done by NORNER, Independent Industrial Polymer Institute from Norway
Static Decay time measured by Static Decay Meter Model 406D (ets)The samples were charged to ±5kV and the time to dissipate 90% of the charge was measured
Comparative study with a well-recognised reference GMS 90 (GMS90-REF)
Conclusion:
Palsgaard® A-S MDG 65P show as good long term antistatic performance in PP homopolymer compared with same concentration of the reference GMS 90, as analysed until 16 weeks after injection moulding
13
Benefits from Palsgaard’s products
• Optimal cost- in-use
• Excellent performance
• Low dosage 0.4 – 0,8 %
• Different forms of products: liquids, paste, powder and pellets
• REACH certified
• Vegetable based – meet safety and sustainability requirements
• Food grade products
• Kosher & Halal certified
Product list for the Polymers Industry
www.palsgaard.com 14
Heart work is the best way to succeed and we are eager to help customers do just that.