Emergency Vehicle Warning Systems Catalogue - Hazard CATALOGUE 2007 b.pdf · Emergency Vehicle...
Transcript of Emergency Vehicle Warning Systems Catalogue - Hazard CATALOGUE 2007 b.pdf · Emergency Vehicle...
Emergency Vehicle Warning Systems Catalogue
10-15-20-30-90 Series Lightbars
Siren Amplifiers & Speakers
LED Message Displays
LED Lightbars
LED Directional Lights
LED & Strobe Beacons
Safety Director Bars
Rotating Minibars & Beacons
Strobe & Halogen Warning Lights
Headlight Flashers
School Bus Flashers
Reversing Cameras
HAZARD SYSTEMS CATALOGUE 2007/2008
10 Series Lightbars
15 Series Lightbars
20 Series Lightbars
30 Series Lightbars
90 Series Lightbars
Siren Amplifiers & Speakers
LED Message Displays
LED Blaze™ Bars & Hide-A-LED™
LED Directional Lights
LED Beacons
LED Strip & LED Grille Light
Safety Director Bars
Rotating Minibars & Beacons
Strobe Beacons & Power Packs
Strobe & Halogen Warning Lights
Headlight & School Bus Flashers
Reversing Cameras
Accessories & Replacement Parts
Gutter Mount Bracket Selection Table
TABLE OF CONTENTS
2
4
6
8
10
12
16
17
18
21
22
23
24
25
26
27
29
30
32
Certain specialised products featured inthis catalogue are exclusive to and areregistered designs of Hazard Systems.
Whilst every care has been taken toensure the accuracy in compiling theinformation in this publication, HazardSystems assumes no responsibility forany possible errors or omissions.
Hazard Systems lightbars are manufactured to the highest standards and incorporate a host of flexible featuresto maximise the available lighting options. Built with care in our Australian factory, they are constructed from thehighest grade polycarbonate lenses and aluminium chassis, and while utilising a weatherproof design they alsofeature adjustable mounting feet and plug-in wiring harnesses for easy installation and removal.
The 10/15 series low profile range utilises high output LEDs for unrivalled performance. The 20/30 series rangeoffers the most flexible lighting options with a unique hinged upper lens allowing easy and safe bulb replacement.The popular 90 series range offers a great balance between low profile and high visibility. Whatever your needs,you will find a Hazard Systems lightbar to suit your application.
Clever Sector:Pair of unique operatoradjustable multifunctionlight modules. Can beused as an oscillatingintersection clearinglight, worklight andalley light. 12 volt only.
10/20 Series.
Rotator:Gear driven rotatormodules producesmooth quiet operation.Reflectors incorporateincreased optics forenhanced light outputand beam spread.
20/30 Series.
LED:Alternating LEDs -front or rear facingLEDs fitted in pairs.
10/15/20/30/90 Series.
Driver Board:All Hazard LED driver /gel boards are encaps-ulated to protect fromingress and vibration.
10/15/20/30/90 Series.
Alternating Halogen:Front or rear facingalternating directionalhalogen lights.
Fitted in pairs.
10/15/20/30 Series.
Linear Strobe:V configuration quad flash linearstrobes provide high intensity 200˚warning with no sun ‘washout’(quad flash 80 FPM, fitted in pairspositioned at 45˚ to each corner).
20/30 Series.
Safety Director:Halogen or LED cont-rolled via touch-pad.Number of light headsdependent on config.Multiple flash patterns.
10/15/20/30 Series.
HAZARD SYSTEMS CATALOGUE 2007/2008 1
HAZARD SYSTEMS LIGHTBARS
Directional Strobe:Double/quad flash frontand rear largedirectional strobes withhelical flashtubes.
20/30/90 Series.
Mirror Linear Strobe Rotator Clever Sector (CS)
Alternating Halogen Directional Strobe LED Safety Director (SD)
Key to Symbols:
Custom Lightbar ConfigurationThe lightbar configurations depicted in this catalogue are only a small sample of our mostpopular models from the hundreds we have on file. Should you have a specific requirementthat isn’t shown, you can always call us for additional specifications from our database.Alternatively, Hazard Systems offer a quick turnaround custom lightbar service enablingyou to specify the exact components needed for your particular application. This service isavailable with 10,15, 20, 30 and 90 Series lightbars ensuring that whatever your requirements,Hazard Systems can provide the solution. Call customer service on 1800 815 000.
All lightbars are supplied with permanent mounting kits. For vehicle specific gutter brackets please refer to the table on page 32.
HAZARD SYSTEMS CATALOGUE 2007/20082
AUSTRALIAN DESIGNED AND MANUFACTURED
Features and benefits:• Low profile unit with aerodynamic efficiency and unobtrusive styling• Low current draw (approximately 20% of a standard lightbar –
a standard 12 volt rotator draws 5 Amps, an LED module draws 0.2 Amps)• Long service life due to LED technology and no moving parts• LEDs rated to 100,000 hours of operation• Solid state encapsulated electronics• Weather-proof housing• 360 degrees light output with increased vertical dispersion at peak output• Meets strict European EMC directives
*5 year warranty on LED components
Construction:• Polycarbonate lens with aluminium extrusion for strength and durability• Plug in wiring harness for easy installation• Unique mounting allows for a neat fit to the roof of the vehicle• Height (centre) 53mm Width (centre) 305mm• Lengths available: 810, 1070, 1200, 1330, 1460, 1590, 1720, 1850 and 1980mm
Electrical:• Units available in 12 or 24 volt• May be controlled by conventional switches, relays or an integrated
siren/amplifier switch (such as 809-001)
5 YEAR WARRANTY*
5Options:
• Takedown lights• Alley lights• Cleversectors™
(12V only)
Director Bar• Several flash patterns
available
Tip Up Message Display• Does not block
warning lights• Display is protected
when not in use• 200+ programmable
messages• Red or amber available
10 SERIES LIGHTBARS
Lens Colours available:AMBER
BLUE CLEARC
RED
LED Colours available:
AMBER
BLUE GREEN
MAGENTA
WHITE
RED
310 SERIES LIGHTBARS
10 SERIES LIGHTBARS
ALLEY= Alley Light TD= Take Down Light WK= Work Light CS= Clever Sector
PART NUMBER VOLTAGE LENGTH TOP LENS LED CONFIGURATIONCOLOUR CORNER FRONT REAR
10-00053-H 12V 1200mm Clear 4 2 2
For 24V version or to customise your own, please contact Hazard Systems.
PART NUMBER VOLTAGE LENGTH TOP LENS LED CONFIGURATIONCOLOUR CORNER FRONT REAR
10-00094-H 12V 810mm Red – 4 4
For 24V version or to customise your own, please contact Hazard Systems.
PART NUMBER VOLTAGE LENGTH TOP LENS LED CONFIGURATIONCOLOUR CORNER FRONT REAR
10-00121-H 12V 1200mm Blue 8 4 4
For 24V version or to customise your own, please contact Hazard Systems.
PART NUMBER VOLTAGE LENGTH TOP LENS LED CONFIGURATIONCOLOUR CORNER FRONT REAR
10-00133-H 12V 1460mm R/C/B 12 2 2
For 24V version or to customise your own, please contact Hazard Systems.
PART NUMBER VOLTAGE LENGTH TOP LENS LED CONFIGURATIONCOLOUR CORNER FRONT REAR
10-00070-H 12V 1200mm R/C/B – 6 6
For 24V version or to customise your own, please contact Hazard Systems.
PART NUMBER VOLTAGE LENGTH TOP LENS LED CONFIGURATIONCOLOUR CORNER FRONT REAR
10-00090-H 12V 1500mm Clear 12 4 4
For 24V version or to customise your own, please contact Hazard Systems.
PART NUMBER VOLTAGE LENGTH TOP LENS LED CONFIGURATIONCOLOUR CORNER FRONT REAR
10-00093-H 12V 1200mm Amber – 4 4
For 24V version or to customise your own, please contact Hazard Systems.
Many other colours, configurations and sizes also available. Please ask for details.
10 Series lightbar configurations:
HAZARD SYSTEMS CATALOGUE 2007/20084
Features and benefits:• Low profile unit with aerodynamic efficiency and
unobtrusive styling• Low current draw (approximately 20% of a standard lightbar –
a standard 12 volt rotator draws 5 Amps, an LED module draws 0.2 Amps)• Long service life due to LED technology and no moving parts• LEDs rated to 100,000 hours of operation• Solid state encapsulated electronics• Weather-proof housing• 360 degrees light output with increased vertical dispersion at peak output• Meets strict European EMC directives
*5 year warranty on LED components
Construction:• Polycarbonate lens with aluminium extrusion for strength and durability• Plug in wiring harness for easy installation• Unique mounting allows for a neat fit to the roof of the vehicle• Height (centre) 53mm Width (centre) 305mm• Lengths: 460, 590, 720, 850, 980, 1110, 1240, 1370, 1500, 1630, 1760 and 1890mm
Electrical:• Units available in 12 or 24 volt• May be controlled by conventional switches, relays or an integrated
siren/amplifier switch (such as 809-001)
5 YEAR WARRANTY*
5Options:
• Takedown lights• Alley lights
Director Bar• Several flash patterns
available
Tip Up Message Display• Does not block
warning lights• Display is protected
when not in use• Up to 99 programmable
messages• Red or amber available
15 SERIES LIGHTBARS
AUSTRALIAN DESIGNED AND MANUFACTURED
Lens Colours available:AMBER
BLUE CLEARC
RED
LED Colours available:
AMBER
BLUE GREEN
MAGENTA
WHITE
RED
515 SERIES LIGHTBARS
15 SERIES LIGHTBARS
PART NUMBER VOLTAGE LENGTH TOP LENS LED CONFIGURATIONCOLOUR CORNER FRONT REAR
15-00115-H 12V 460mm Clear 4 2 2
For 24V version or to customise your own, please contact Hazard Systems.
PART NUMBER VOLTAGE LENGTH TOP LENS LED CONFIGURATIONCOLOUR CORNER FRONT REAR
15-00192-H 12V 1370mm Clear 2 4 6
For 24V version or to customise your own, please contact Hazard Systems.
PART NUMBER VOLTAGE LENGTH TOP LENS LED CONFIGURATIONCOLOUR CORNER FRONT REAR
15-00199-H 12V 1240mm Amber 4 4 4
For 24V version or to customise your own, please contact Hazard Systems.
PART NUMBER VOLTAGE LENGTH TOP LENS LED CONFIGURATIONCOLOUR CORNER FRONT REAR
15-00135-H 12V 1240mm R/B – 6 6
For 24V version or to customise your own, please contact Hazard Systems.
PART NUMBER VOLTAGE LENGTH TOP LENS LED CONFIGURATIONCOLOUR CORNER FRONT REAR
15-00216-H 12V 1500mm R/C/B 2 6 6
For 24V version or to customise your own, please contact Hazard Systems.
PART NUMBER VOLTAGE LENGTH TOP LENS LED CONFIGURATIONCOLOUR CORNER FRONT REAR
15-00207-H 12V 1110mm Red 4 3 3
For 24V version or to customise your own, please contact Hazard Systems.
PART NUMBER VOLTAGE LENGTH TOP LENS LED CONFIGURATIONCOLOUR CORNER FRONT REAR
15-00169-H 12V 1240mm Blue 4 8 8
For 24V version or to customise your own, please contact Hazard Systems.
ALLEY= Alley Light TD= Take Down Light
Many other colours, configurations and sizes also available. Please ask for details.
15 Series lightbar configurations:
20 SERIES LIGHTBARS
HAZARD SYSTEMS CATALOGUE 2007/20086
AUSTRALIAN DESIGNED AND MANUFACTURED
DUAL DECK LIGHTBAR
Features and benefits:• Two levels of lighting options using Rotator, Strobe or Halogen• Weather-proof housing• Siren option using 100 watt centre mounted speaker• Hazard’s unique Staggered Rotator System provides
maximum vehicle side warning• Synchronised Rotators available on request• LED now available• Capable of utilising Cleversector™ (12V only) technology
(combination takedown, intersection and alley light)
Construction:• Two level design gives unobstructed light output• Unique body hugging shape allows extra lighting without adding to height• Hinged top lens allows easy access• Plug in wiring harness enables easy installation and replacement if damaged• Aluminium centre chassis enhancing the monocoque (single shell) polycarbonate
construction creating a stable design at high speeds and in harsh environments• Height (centre) 130mm Width (centre) 305mm• Lengths available: 810, 1070, 1200, 1330, 1460, 1590, 1720, 1850 and 1980mm
Electrical:• Units available in 12 or 24 volt• May be controlled by conventional switches, relays or an integrated
siren/amplifier switch (such as 809-001)
Top Deck Options:• Speaker• Rotators• Illuminated sign• Linear strobes
Bottom Deck Options:• Takedown lights• Alley lights• LEDs• Directional strobes• Halogen strobes• Cleversectors™ (12V only)• Director bar
Message Display:• Automatic tip-up system
for superior visibility• Does not block
warning lights• Protected when not in use• Up to 99 programmable
messages• Uses ultra compact
control unit• Available in Red, Amber• Fixed message display
also available
LED Colours available:
AMBER
BLUE GREEN
MAGENTA
WHITE
RED
Lens Colours available:AMBER
BLUE WHITE
RED
2 YEAR WARRANTY*
CLEARC
720 SERIES LIGHTBARS
Many other colours, configurations and sizes also available. Please ask for details.
20 Series lightbar configurations:
20 SERIES LIGHTBARS
PART NUMBER VOLTAGE LENGTH LENS ROTATORS STROBES MIRRORS ADDITIONAL FEATURESCOLOUR LED CS HF
20-00183-H 12V 1200mm Amber 4 – 2 4 – –
For 24V version or to customise your own, please contact Hazard Systems.
ILLUMINATED
PART NUMBER VOLTAGE LENGTH LENS ROTATORS STROBES MIRRORS ADDITIONAL FEATURESCOLOUR LED CS HF
20-00125-H 12V 1330mm A/W/A 2 – 2 – – 4
For 24V version or to customise your own, please contact Hazard Systems.
ILLUMINATED
PART NUMBER VOLTAGE LENGTH LENS ROTATORS STROBES MIRRORS ADDITIONAL FEATURESCOLOUR LED CS HF
20-00200-H 12V 1590mm A/W/A 2 – 2 8 2 –
For 24V version or to customise your own, please contact Hazard Systems.
ILLUMINATED
PART NUMBER VOLTAGE LENGTH LENS ROTATORS STROBES MIRRORS ADDITIONAL FEATURESCOLOUR LED CS HF
20-00129-H 12V 1460mm R/W/B 4 – 2 4 2 –
For 24V version or to customise your own, please contact Hazard Systems.
ILLUMINATED
PART NUMBER VOLTAGE LENGTH LENS ROTATORS STROBES MIRRORS ADDITIONAL FEATURESCOLOUR LED CS HF
20-00218-H 12V 1330mm R/W/B 4 – 2 4 – –
For 24V version or to customise your own, please contact Hazard Systems.
ILLUMINATED
PART NUMBER VOLTAGE LENGTH LENS ROTATORS STROBES MIRRORS ADDITIONAL FEATURESCOLOUR LED CS HF
20-00023-H 12V 1200mm R/W/R 4 4dir 2 – – –
For 24V version or to customise your own, please contact Hazard Systems.
PART NUMBER VOLTAGE LENGTH LENS ROTATORS STROBES MIRRORS ADDITIONAL FEATURESCOLOUR LED CS HF
20-00216-H 12V 1200mm Blue 2 – 2 10 – –
For 24V version or to customise your own, please contact Hazard Systems.
ALLEY= Alley Light TD= Take Down Light CS= Clever Sector HF= Halogen Flasher
30 SERIES LIGHTBARS
HAZARD SYSTEMS CATALOGUE 2007/20088
AUSTRALIAN DESIGNED AND MANUFACTURED
DUAL DECK LIGHTBAR
Top Deck Options:• Speaker• Illuminated centre section• Rotators• Linear strobes• Directional strobes
Bottom Deck Options:• Takedown lights• Alley lights• LEDs• Directional strobes• Halogen strobes• Halogen flasher• Director bar
Message Display:• Automatic tip-up system
for superior visibility• Does not block
warning lights• Protected when not in use• Up to 99 programmable
messages• Uses ultra compact
control unit• Available in Red, Amber• Fixed message display
also available
Features and benefits:• Weather-proof housing• Sealed cable entry with internal connector• Design enhances warning visibility yet maintains
aerodynamic efficiency• Hazard’s unique Staggered Rotator System provides
maximum vehicle side warning• Synchronised Rotators available on request
Construction:• Sectional lens for design flexibility• Aluminium centre chassis enhancing the monocoque (single shell) polycarbonate
construction creating a stable design at high speeds and in harsh environments• Unique hinged lid and lens locking clips enable easy access to the lightbar for
servicing and globe changes• Height 130mm Width 305mm• Lengths: 460, 590, 720, 850, 980, 1110, 1240, 1370, 1500, 1630, 1760 and 1890mm
Electrical:• Units available in 12 or 24 volt• May be controlled by conventional switches, relays or an integrated
siren/amplifier switch (such as 809-001)
2 YEAR WARRANTY*
LED Colours available:AMBER
BLUE GREEN
MAGENTA
WHITE
RED
Lens Colours available:AMBER
BLUE WHITE
RED MAGENTA
CLEARC
30 SERIES LIGHTBARS
930 SERIES LIGHTBARS
ILLUMINATED
ILLUMINATED
ILLUMINATED
ILLUMINATED
PART NUMBER VOLTAGE LENGTH LENS ROTATORS STROBES MIRRORS LEDCOLOUR
30-00172-H 24V 1240mm Amber 4 – – –
For 12V version or to customise your own, please contact Hazard Systems.
PART NUMBER VOLTAGE LENGTH LENS ROTATORS STROBES MIRRORS LEDCOLOUR
30-00123-H 12V 1240mm A/W/A 4 – 2 –
For 24V version or to customise your own, please contact Hazard Systems.
PART NUMBER VOLTAGE LENGTH LENS ROTATORS STROBES MIRRORS LEDCOLOUR
30-00171-H 24V 1500mm Amber 2 – – 8
For 12V version or to customise your own, please contact Hazard Systems.
PART NUMBER VOLTAGE LENGTH LENS ROTATORS STROBES MIRRORS LEDCOLOUR
30-00155-H 12V 1240mm R/W/B – 4lin 4dir – –
For 24V version or to customise your own, please contact Hazard Systems.
PART NUMBER VOLTAGE LENGTH LENS ROTATORS STROBES MIRRORS LEDCOLOUR
30-00321-H 24V 1240mm R/W/B 4 – 2 4
For 12V version or to customise your own, please contact Hazard Systems.
PART NUMBER VOLTAGE LENGTH LENS ROTATORS STROBES MIRRORS LEDCOLOUR
30-00210-H 12V 1500mm Red 4 – 2 –
For 24V version or to customise your own, please contact Hazard Systems.
PART NUMBER VOLTAGE LENGTH LENS ROTATORS STROBES MIRRORS LEDCOLOUR
30-00180-H 12V 1240mm B/W/B 2 – 2 12
For 24V version or to customise your own, please contact Hazard Systems.
ALLEY= Alley Light TD= Take Down Light
Many other colours, configurations and sizes also available. Please ask for details.
30 Series lightbar configurations:
HAZARD SYSTEMS CATALOGUE 2007/200810
90 SERIES LIGHTBARS
AUSTRALIAN DESIGNED AND MANUFACTURED
Features and benefits:• Australian designed and manufactured• Flexible lens colouring to meet all customer requirements• Light sources include Halogen, Directional Strobes, Linear Strobes or LEDs• Weather-proof housing and sealed cable entry with internal connector• Design enhances warning visibility yet maintains aerodynamic efficiency• Robust single deck bar
Construction:• Low profile, high visibility bar• Sectional lens design polycarbonate construction creating a stable design at high
speeds and in harsh environments• Height 95mm Width 260mm• Lengths available: 350, 540, 850, 1070, 1230, 1330, 1430, 1720, 1850 and 2000mm
Electrical:• Units available in 12 or 24 volt• May be controlled by conventional switches, relays or an integrated
siren/amplifier switch (such as 809-001)
2 YEAR WARRANTY*
Options:• Directional strobe• Linear strobe• Halogen flashers• LED modules• Work lights• Alley lights• Take down lights• Stop/tail/indicator lights• Illuminated sign
Message Display:• Up to 99 programmable
messages• Uses ultra compact
control unit• Available in Red, Amber
Lens Colours available:AMBER
BLUE
CLEARC
RED
LED Colours available:
AMBER
BLUE GREEN
MAGENTA
WHITE
WHITE
RED
BLACKGREEN
MAGENTAImage supplied by Hänsch Warnsysteme GmbH (German distributor).
1190 SERIES LIGHTBARS
90 SERIES LIGHTBARS
PART NUMBER VOLTAGE LENGTH LENS ALT. STROBES LEDCOLOUR HALOGENS
90-00046-H 12V 1070mm Amber 8 4lin –
For 24V version or to customise your own, please contact Hazard Systems.
PART NUMBER VOLTAGE LENGTH LENS ALT. STROBES LEDCOLOUR HALOGENS
90-00221-H 12V 1230mm Red – 4lin 4dir –
For 24V version or to customise your own, please contact Hazard Systems.
PART NUMBER VOLTAGE LENGTH LENS ALT. STROBES LEDCOLOUR HALOGENS
90-00176-H 12V 1070mm Blue – 4lin 2dir –
For 24V version or to customise your own, please contact Hazard Systems.
ILLUMINATED
PART NUMBER VOLTAGE LENGTH LENS ALT. STROBES LEDCOLOUR HALOGENS
90-00167-H 12V 1230mm R/W/B 12 – –
For 24V version or to customise your own, please contact Hazard Systems.
ILLUMINATED
PART NUMBER VOLTAGE LENGTH LENS ALT. STROBES LEDCOLOUR HALOGENS
90-00072-H 12V 1330mm R/W/B – – 12
For 24V version or to customise your own, please contact Hazard Systems.
ILLUMINATED
PART NUMBER VOLTAGE LENGTH LENS ALT. STROBES LEDCOLOUR HALOGENS
90-00189-H 12V 1330mm Clear – – 12
For 24V version or to customise your own, please contact Hazard Systems.
ILLUMINATED
PART NUMBER VOLTAGE LENGTH LENS ALT. STROBES LEDCOLOUR HALOGENS
90-00117-H 12V 1590mm A/W/A – 4lin –
For 24V version or to customise your own, please contact Hazard Systems.
ALLEY= Alley Light TD= Take Down Light
Many other colours, configurations and sizes also available. Please ask for details.
90 Series lightbar configurations:
HAZARD SYSTEMS CATALOGUE 2007/200812
SIREN AMPLIFIERS & SPEAKERS
1000 Series Our premium siren amplifier
Use in conjunction with the 809-903 world renowned SLIC controller to
control your siren and lightbar, or a wide variety of lighting systems.
• ‘e’- mark 12V/24V 100W• 60, 100 and 200 watt output available• Remote keypad controller with backlight• Public address – volume control on microphone• Wail, yelp and hi-lo tones, user selectable• Softstart siren and manual wail• 8 x lighting control relays – user configurable• Radio re-broadcast, HRT and bonnet switch inputs• Can be configured for airhorn or phaser tones• Over/under voltage, over temperature and thermal protection
Siren amplifier dimensions: 50 x 90 x 170mm Siren amplifier weight: 1kgControl pad dimensions: 15 x 50 x 90mm Control pad weight: 126g
3000 Series Our mid range unit
This self contained unit will get the job done with minimum fuss.
• ‘e’- mark 12V/24V 100W• 60 watt and 100 watt output available• Public address – volume control on microphone• Wail and yelp tones• Airhorn• Radio re-broadcast and HRT inputs• Over/under voltage, over temperature and
thermal protection
Siren amplifier dimensions: 50 x 90 x 170mm Siren amplifier weight: 1kg
PART NUMBER DESCRIPTION
809-001 100W Siren Amplifier Complete Kit 12V (comprises siren amplifier, control pad, wiring harness and microphone).
809-001-200 200W Siren Amplifier Complete Kit 12V (comprises siren amplifier, control pad, wiring harness and microphone).
809-002 100W Siren Amplifier Complete Kit 24V (comprises siren amplifier, control pad, wiring harness and microphone).
809-002-200 200W Siren Amplifier Complete Kit 24V (comprises siren amplifier, control pad, wiring harness and microphone).
809-901 12V 100W Siren Amplifier 809-901-200 12V 200W Siren Amplifier
809-902 24V 100W Siren Amplifier 809-902-200 24V 200W Siren Amplifier
809-903 Control Pad 809-904 100W Wiring Kit ( includes Mic) 809-905 Microphone
PART NUMBER DESCRIPTION
809-007 100W Siren Amplifier Complete Kit 12V (comprises siren amplifier, switch, wiring harness and microphone).
809-008 100W Siren Amplifier Complete Kit 24V (comprises siren amplifier, switch, wiring harness and microphone).
809-912 12V 100W Siren Amplifier 809-913 24V 100W Siren Amplifier
809-914 Wiring Kit ( includes Mic) 809-905 Microphone
13SIREN AMPLIFIERS & SPEAKERS
SIREN AMPLIFIERS & SPEAKERS
2000 SeriesOur most popular low cost unit
The 2000 Series is a budget priced, microprocessor controlled,
small footprint, no frills unit, designed to meet the needs in
space limited applications.
• ‘e’- mark 12V/24V 100W• 60 watt and 100 watt output available• Softstart siren• Wail and yelp tones• Selectable airhorn and phaser tones• HRT input• Note: no public address
Siren amplifier dimensions: 50 x 65 x 210mmSiren amplifier weight: 1kg
PART NUMBER DESCRIPTION
809-004 100W Siren Amplifier Complete Kit 12V (comprises siren amplifier, rocker switch and wiring harness).
809-006 100W Siren Amplifier Complete Kit 24V (comprises siren amplifier, rocker switch and wiring harness).
809-907 12V 100W Siren Amplifier 809-909 24V 100W Siren Amplifier
809-910 Wiring Kit 809-911 Switch
PART NUMBER DESCRIPTION
809-010 100W Siren Amplifier Complete Kit 12V (comprises siren amplifier, switch, wiring harness and microphone).
809-011 100W Siren Amplifier Complete Kit 24V (comprises siren amplifier, switch, wiring harness and microphone).
809-920 12V 100W Siren Amplifier 809-921 24V 100W Siren Amplifier
809-922 Wiring Kit 809-923 Remote Switch Head
4000 SeriesOur heavy duty siren
The heavy-duty 4000 Series is a robust unit that has a remote
operating head for ease of installation and operation.
• Available in 12VDC or 24VDC• 60 watt / 100 watt output• Public address• Wail, yelp and hi-lo tones• Manual wail or airhorn• Radio re-broadcast• 2 x lighting control relays
Siren amplifier dimensions: 65 x 180 x 200mmSiren amplifier weight: 2.1kgSwitch head dimensions: 60 x 110 x 65mmSwitch head weight: 150g
HAZARD SYSTEMS CATALOGUE 2007/200814
SIREN AMPLIFIERS & SPEAKERS
CS201
CS202
PART NUMBER DESCRIPTION
809-015 CS201 Complete Kit 12V (comprises CS201 12V amplifier and controller, cradle, harness and instructions).
809-016 CS201 Complete Kit 24V (comprises CS201 24V amplifier and controller, cradle, harness and instructions).
809-017 CS202 Complete Kit 12V (comprises CS202 12V amplifier and controller, cradle, harness and instructions).
809-018 CS202 Complete Kit 24V (comprises CS202 24V amplifier and controller, cradle, harness and instructions).
809-930 CS201 12V Amplifier 809-933 CS202 12V Amplifier 809-936 Wiring Harness Kit - standard
809-931 CS201 24V Amplifier 809-934 CS202 24V Amplifier 809-937 Wiring Harness Kit - slave
809-932 CS201 Controller 809-935 CS202 Controller 809-938 Controller Cradle
SIREN AMPLIFIER
CS200 SeriesCS200 Series Electronic Siren / Lighting Controllers
All Hazard Systems CS200 series sirens are 200W capable, available in 12V or 24Vversions, and feature a control head with an integrated Public Address microphone.
The CS201 is the base model. It is siren-only with no warning light controls, and a3-button (+ push-to-talk) control head:
• Siren / tone scroll • Air horn • Cancel
The CS202 expands on the base model with the addition of radio rebroadcast,6 lighting control channels and an enhanced 9-button control head:
• 1,2,3 progressive warning level buttons
• Manual Siren • Radio-Rebroadcast• Multiway (Left / Right / Forward / Clear ) Lighting Control Button.
Control Head / Microphone Features:• Integrated Microphone Control Head • Backlit, illuminated buttons• Adjustable Public Address Volume • Easy to use, low-clutter button layout• High Quality Construction • 1,2,3 Progressive warning level buttons• Rubberised ‘Soft-Touch’ Handpiece • ‘Hands-Free’ control mode• Swivel mounting cradle
CS202 Extra Features:• Radio Rebroadcast Capability • Manual Wail function• 6 channels of relay-switched lighting control with status LEDs
Siren Amplifier Unit:• Rugged Extruded Amplifier Housing• Specially Designed Convective Cooling Fins• Protected against Under-Voltage, Over-Voltage, Reverse-Polarity, Supply Transients
& Output Short-Circuits• Protected against Thermal Overload• Available for 12V or 24V vehicles• Designed to drive one or two 11-ohm 100-Watt siren speakers• Up to 200W siren output power, or 400W with optional slave amplifier unit• Wide range of supported siren tones• SOFTSTART™ siren tones• Vehicle Horn interface (HRT)• Dedicated Automatic Gain Control (AGC) circuit optimises Public Address clarity
15SIREN AMPLIFIERS & SPEAKERS
SIREN AMPLIFIERS & SPEAKERS
810-008 Speaker Under Bumper 100 Watt (11OHMS)810-008HD H/Duty Speaker Under Bumper 100 Watt (11OHMS)
Dimension: 210 x 220 x 130mmWeight: 4.12kg
810-002 Speaker Round 100 Watt (11OHMS)810-002HD Heavy Duty Speaker Round 100 Watt (11OHMS)
Dimension: 107 x 107 x 107mmWeight: 2.42kg
810-011 Speaker Flat 100 Watt (11OHMS)Dimension: 80 x 170 x 180mmWeight: 3.29kg
810-006 Speaker Rectangular 100 Watt (11OHMS)810-006HD Heavy Duty Speaker Rectangular 100 Watt (11OHMS)
Dimension: 190 x 150 x 110mmWeight: 2.56kg
810-009 Speaker Buglehorn 100 Watt - Ford (11OHMS)810-010 Speaker Buglehorn 100 Watt - Holden (11OHMS)
Weight: 3.2kg
810-014 VE Commodore Speaker and Bracket (Omega)
810-015 VE Commodore Speaker and Bracket (SS)
810-016 VE Commodore Speaker Bracket only (Omega)(does not include speaker)
810-017 VE Commodore Speaker Bracket only (SS)(does not include speaker)
810-013 100 Watt Siren Driver
810-013HD 100 Watt Heavy Duty Siren Driver
LED MESSAGE DISPLAYS
HAZARD SYSTEMS CATALOGUE 2007/200816
With Hazard’s range of LED Message Displays,messages of up to 2000 characters arepre-programmed at the factory, or an interfacemay be purchased to enable you to programyour own messages. Displays can be mountedon lightbars, used stand alone on the parcelshelf, or on the exterior of vehicles.
Specifications:• Available in 12V in Red or Amber.
• Low standby current.
• Reduced RF emissions and susceptibility.
• Extremely reliable communication link.
• Simple message programming on M4 systemvia Windows software and USB interface.
• M4 system supports more flexible messages,including scrolling messages.
• M4 system supports graphics and foreigncharacters, with a user definable/editablecharacter set.
• Flash-based firmware allows the user tomake simple field changes with M4 system.
• M4 unit ‘e’-marked for sale into Europe.
• Max speed 80kph (tip up unit)
• Safety clutch mechanism (tip up unit)
• Can hold up to 99 messages
LED Message Displays
LED Colours available:AMBERRED
889-010M4 Digital Message Controller
889-011M3 Digital Message Controller
889-012Programming Interface for889-010 (software included)
889-013Programming Interface for889-011 (software included)
LED MESSAGE DISPLAYS
PART NUMBER DESCRIPTION
889-001X Tip Up Message Display Kit 12VDC includes 889-010 660 x 180 x 45mm
889-002X Tip Down Message Display Kit 12VDC includes 889-010 660 x 180 x 45mm
889-003X Fixed Message Display Kit (90 Series) 12VDC inc. 889-011 528 x 130 x 38mm
889-004X Fixed Message Display Kit 12VDC includes 889-011 528 x 130 x 38mm
Replace X in part no. with colour: R = Red, A = Amber
M4 TIP DOWNMESSAGE DISPLAY
M4 TIP UP MESSAGE DISPLAY
M3 FIXED MESSAGE DISPLAY
LED BLAZE™ BARS & HIDE-A-LED™
LED BLAZE™ BARS & HIDE-A-LED™ 17
Colours available:
MAGENTA
GREENAMBER
BLUERED
RED/BLUE
Head Configurations
No more replacing strobe tubes year after year! The Hide-A-LED™is the next-generation of undercover warning signal.
The Hide-A-LED™ utilizes the latest LED technology to deliver high-intensity, pure colour LED light blasts where you need them most.
Hide-A-LED™
PART NUMBER DESCRIPTION HEADS CONFIGURATION MOUNTING VOLTAGE
822-106X Blaze LED Lightbar 6 Head 4C 1F 1R Permanent 12
822-106X-M Blaze LED Lightbar 6 Head 4C 1F 1R Magnetic 12
822-107X Blaze LED Lightbar 6 Head 4C 1F 1R Permanent 24
822-107X-M Blaze LED Lightbar 6 Head 4C 1F 1R Magnetic 24
822-108X Blaze LED Lightbar 8 Head 4C 2F 2R Permanent 12
822-108X-M Blaze LED Lightbar 8 Head 4C 2F 2R Magnetic 12
822-109X Blaze LED Lightbar 8 Head 4C 2F 2R Permanent 24
822-109X-M Blaze LED Lightbar 8 Head 4C 2F 2R Magnetic 24
Replace X in part no. with colour: R = Red, B = Blue, A = Amber, G = Green, M = Magenta, RB = Red/Blue
LED BLAZE™ LIGHTBARS
DIAMETERSPART NUMBER FLASH PATTERNS LED ELEMENTS HEIGHT BODY BASE CABLE LENGTH WARRANTY
830-040X 8 standard 4 42mm 25mm 38mm 2.7m 5 year
Replace X in part no. with colour: R = Red, B = Blue, A = Amber, W = White
HIDE-A-LED™ UNDERCOVER WARNING SIGNAL
A high quality, compact and versatile high intensity Lightbar with allthe functionality (excluding alley / take down lights) of our largerLED Lightbars. Major benefits of this LED Lightbar are its size(400mm x 210mm x 110mm) and the vacuum magnetic mountsystem, which is rated to 112kph.
Specifications:• Reliable solid-state electronics.
• The lightbars are voltage specific and are available in 12 or 24V.
• Voltage rating: 12V: 9-16V 24V: 18-30V
• Very low current consumption due to high power 1 watt lumileds.
• 12V: average 0.2amp per head 24V: average 0.1amp per head.
• Permanent or vacuum magnet mount (with cigarette plug).
• Flash patterns: The lightbars come pre-programmed with threeflash patterns (these are selectable by opening the lightbar).
• Permanent mount lightbars can be synchronized to otherHazard products.
LED Blaze™ Bars
HAZARD SYSTEMS CATALOGUE 2007/200818
SAE Class 1 Grille/Deck/Dash & Window MountLED Light Heads
Utilising proven LED module featuring four 1 watt LEDs, thesegrille/deck/dash and window mount LED lights offer flexible mountingoptions for both permanent and temporary applications. Multiplehardwired, grille/deck/dash versions are synchronisable and aresupplied with both temporary and permanent mounting hardware.Window mount versions feature flash pattern switch and switchedcigarette plug adapters with ‘indicator’ light.
Features:• Extruded aluminium housing with epoxy encapsulated electronics• Steady Burn, Double, Fast Double, Quad and Quint Flash patterns
plus integral alternating flash modes (12V models only)• Discreet units are colourless when not illuminated• LEDs offer a long maintenance-free service life• Multiple grille/deck/dash versions can be synchronised
(hardwired units only)• 5 year warranty• Temperature range -30˚c to 50˚c
Approvals:• SAE J845 Class 1
• CE, e
Window: Flash patterns are user selectable at any time via switch mounted on housing.
Replace X with desired colour: R = Red, B = Blue, A = Amber, W = White, G = Green, M= Magenta, RB = Red/Blue
Grille/Deck/Dash: Multiple unit synchronisation and flash pattern selection available via switch wires at installation.
Replace X with desired colour: R = Red, B = Blue, A = Amber, W = White, G = Green, M= Magenta, RB = Red/Blue
3600 Series (Single Head)
LED DIRECTIONAL LIGHTS
LED Colours available:
STEADY / DOUBLE / QUAD / QUINT FLASH
AMBERBLUE
GRILLE/DECK/DASH
WINDOW
WHITE
RED MAGENTA
GREEN
PART NUMBER VOLTAGE AMPS
830-003X 12 0.2 A
830-004X 24 0.1 A
Grille/Deck/Dash
PART NUMBER VOLTAGE AMPS
830-001X 12 0.2 A
830-002X 24 0.1 A
Window
Window mount versions
feature switched cigarette
plug with ‘indicator’ light
Suction cups, mounting
tape, shield foam and
mounting screws supplied
with all models (quantities
dependent on configuration).
RED/BLUE (12V only)
LED DIRECTIONAL LIGHTS
LED DIRECTIONAL LIGHTS 19
LED Colours available:AMBERBLUE MAGENTA GREEN WHITERED
SAE Class 1 Grille/Deck/Dash & Window MountLED Light Heads
Utilising two unique LED modules featuring four 1 watt LEDs perhead, these grille/deck/dash and window mount LED heads offerboth permanent and temporary mounting options. Multiple hardwired,grille/deck/dash versions are synchronisable and are also suppliedwith temporary mounting hardware. Window mount versionsfeature flash pattern switch and switched cigarette plug adapters.
Features:• Extruded aluminium housing with epoxy encapsulated electronics• Steady Burn, Double, Fast Double, Quad and Quint Flash patterns• Discreet units are colourless when not illuminated• LEDs offer a long maintenance-free service life• Multiple grille/deck/dash versions can be synchronised
(hardwired units only)• 5 year warranty• Temperature range -30˚c to 50˚c
Approvals:• SAE J845 Class 1
• CE, e
Window: Flash patterns are user selectable at any time via switch mounted on housing.
Replace X: R = Red, B = Blue, A = Amber, M = Magenta, G = Green, W = White, RB = Red/Blue, AW = Amber/White
Grille/Deck/Dash: Multiple unit synchronisation and flash pattern selection available via switch wires at installation.
Replace X: R = Red, B = Blue, A = Amber, M = Magenta, G = Green, W = White, RB = Red/Blue, AW = Amber/White
3600 Series (Twin Head)
STEADY / DOUBLE / QUAD / QUINT FLASH
GRILLE/DECK/DASH
WINDOW
RED/BLUE AMBER/WHITE
PART NUMBER VOLTAGE AMPS
830-012X 12 0.4 A
830-013X 24 0.2 A
Grille/Deck/Dash
PART NUMBER VOLTAGE AMPS
830-010X 12 0.4 A
830-011X 24 0.2 A
Window
HAZARD SYSTEMS CATALOGUE 2007/200820
Featuring a unique LED module, comprising four x 1W LEDs andribbed optics for maximum light dispersion, these surface mount LEDheads offer maintenance-free, high intensity warning. Multiple unitsare synchronisable and feature multiple user-selectable flash patterns.
Features:• Robust die-cast coated aluminium housing with epoxy
encapsulated electronics• Steady Burn, Double, Fast Double, Quad and Quint Flash patterns
plus integral alternating flash modes (12V models only)• Discreet units are colourless when not illuminated• Multiple units can be synchronised• 5 year warranty• Temperature range -30˚c to 50˚c
Approvals:• SAE J845 Class 1 • CE, e
Replace X with desired colour: R = Red, B = Blue, RB = Red/Blue, A = Amber, W = White, G = Green, M = Magenta
3700 Series Surface Mount LED Light Head
LED DIRECTIONAL LIGHTS
LED Colours available:
STEADY / DOUBLE / QUAD / QUINT FLASH
AMBERBLUE
WHITE
RED MAGENTA
GREEN
Surface
RED/BLUE
Hazard Systems are proud to release the latest and smallest LED light head to their wide range of LED emergency lights.This unique unit will complement the 4 head unit that is currently performing exceptionally well in the field. This unit is also epoxyfilled, completely sealed against the elements, has low current draw, 10 flash patterns and they can synchronise to each other.
Features:• Three x 1W high power LEDs (rated to 100,000 hours of operation)• Low maintenance• 5 year warranty• 10 flash patterns including steady burn• Can be synchronised with other 3 head units• Low current draw: 12Vdc = .2 Amp and 24Vdc = .1 Amp• Small and compact: 90mm x 40mm x 33mm
Mini LED Surface Mount LED Light Head
LED Colours available:BLUE WHITERED AMBER
PART NUMBER VOLTAGE AMPS PART NUMBER VOLTAGE AMPS
830-006X 12 0.2 A 830-006DX 12 0.2 A D = increased horizontal optics
830-007X 24 0.1 A 830-007DX 24 0.1 A D = increased horizontal optics
Replace X in part number with desired LED colour: R = Red, B = Blue, A = Amber, W = White
STEADY / DOUBLE / QUAD / QUINT FLASH
Surface PART NUMBER VOLTAGE AMPS
830-030X 12 0.2 A
830-030X-24 24 0.1 A
LED BEACONS
LED DIRECTIONAL LIGHTS & BEACONS 21
LED Colours available:AMBERBLUE WHITERED
Switchable intensity: Flash intensity and double or quad flash mode are user selectable via on-board switch.
Replace X in part number with desired LED colour: R = Red, B = Blue, A = Amber, W = White
PULSE® - SWITCHABLE INTENSITY
PART NUMBER VOLTAGE LENS COLOUR LED COLOUR AMPS FPM
830-060A 12-24 amber amber 0.5 A 80 double or 65 quad
830-060CX 12-24 clear specify colour 0.5 A 80 double or 65 quad
3 Bolt Flange
Switchable intensity: Flash intensity and double or quad flash mode are user selectable via on-board switch.
Replace X in part number with desired LED colour: R = Red, B = Blue, A = Amber, W = White
PART NUMBER VOLTAGE LENS COLOUR LED COLOUR AMPS FPM
830-060A-VM 12-24 amber amber 0.5 A 80 double or 65 quad
830-060CX-VM 12-24 clear specify colour 0.5 A 80 double or 65 quad
Vacuum Magnet
SAE Class 1 LED
7900 Series LED Beacons feature eight of the latest high intensity3W LEDs providing the brightest light output available in an LEDbeacon. Double or quad flash operation and hi/lo intensity controlcombined with a long maintenance-free service life and low ampdraw, make this beacon the perfect choice for any application.Easily replaces old rotating or strobe beacons with the latesttechnology, so no ongoing maintenance is required.
Features:• Eight x 3W LEDs provide unrivalled flash intensity• Double or quad flash operation with hi-lo intensity control• Die cast aluminium base is coated against corrosion and
designed for vibration resistance and heat dissipation• Thread-on polycarbonate lens allows easy flash mode selection
without tools• Reverse polarity, voltage spike and surge protected• 5 year warranty• Temperature range -30˚c to 50˚c
Approvals:• AMECA certified to SAE J845 Class 1 (amber and red only,
blue and clear = Class 2)
• CE, e
7900 Series
HAZARD SYSTEMS CATALOGUE 2007/200822
LED STRIP & LED GRILLE LIGHT
QUAD FLASH
LED Grille Light
Replace X in part number with desired LED colour: R = Red, B = Blue,
DOUBLE / QUAD FLASH
Rubber Body LED Light PART NUMBER VOLTAGE AMPS
830-020X 12 0.2 A
These independent LED directional lights offer long life, low maintenance operation withno moving parts or bulbs/flash tubes to break or replace.
Features:• High output LEDs offer low maintenance, long life and
low current consumption• Ultrasonically sealed housing• Vibration and shock resistant construction• 2 year warranty• Temp range -30˚c to +50˚c
Approvals:• SAE J845 Class 2
LED Colours available:BLUERED
This unique low profile, slimline LEDstrip is a compact and versatile high intensityLED warning device suitable for mounting inside oroutside the vehicle. Colourless until illuminated, the LED stripfeatures epoxy encapsulated electronics offering a high degree ofenvironmental and vibration protection.
Additional benefits of the LED strip include low current draw, long and maintenance freeservice life with reliable solid-state electronics with extremely low electromagnetic emissions.
Specifications:• The LED strip is available in 6 or 8 head models.
• The LED strips are voltage specific and as such are available in 12 and 24 volt.
• Input voltage range: 12V: 9-16VDC 24V: 18-30VDC
• Current consumption:
6 head: 12V: average 1.2a peak 2.4a 24V: average 0.6a peak 1.2a
8 head: 12V: average 1.6a peak 3.2a 24V: average 0.8a peak 1.6a
• Flash patterns: The LED strip comes pre-programmed with an alternating quadflash pattern. It can also be synchronised to other Hazard LED products. • Size: 1000mm L x 40mm D x 47mm H
LED Strip Colours available:AMBERBLUERED RED/BLUE
THE LED STRIP CAN BE MOUNTEDPARALLEL OR PERPENDICULAR TO THE
INSTALLATION SURFACE
PART NUMBER HEADS VOLTAGE AVERAGE AMPS PEAK AMPS PART NUMBER HEADS VOLTAGE AVERAGE AMPS PEAK AMPS
830-861X 6 12 1.2 A 2.4 A 830-881X 8 12 1.6 A 3.2 A
830-862X 6 24 0.6 A 1.2 A 830-882X 8 24 0.8 A 1.6 A
Replace X with desired colour: R = Red, B = Blue, A = Amber, RB = Red/Blue
SAFETY DIRECTOR™ BARS
SAFETY DIRECTOR™ BARS 23
SAFETY DIRECTOR™ FLASH PATTERNS
High output directional warning with the added benefits of low amp draw, maintenancefree and long-life LED light source. The LED Safety Director™ is the definitive trafficdirection lighting solution.
Features:• Extruded aluminium housing and clear polycarbonate LED module (illuminated amber)• Epoxy sealed electronics for environmental protection• Controller features 15 amp auxiliary switch• Temp range -30˚c to +50˚c• 5 year warranty
Approvals:• SAE J845 Class 1
3300 Series LED Safety Director™
SAFETY DIRECTOR™ SYSTEM
PART NUMBER LIGHT SOURCE VOLTAGE CABLE LENGTH MAX AMPS
824-005 LED 12 10 M 7 A
824-001 Halogen 12 4.5 M 18 A
824-002 Halogen 12 10 M 18 A
PART NUMBER LIGHT SOURCE VOLTAGE CABLE LENGTH MAX AMPS
824-006 LED 24 10 M 3.5 A
824-003 Halogen 24 4.5 M 9 A
824-004 Halogen 24 10 M 9 A
LEFT (L) RIGHT (R) LEFT SOLID (LS) RIGHT SOLID (RS)
CENTRE OUT (C) CENTRE OUT SOLID (CS)
WIG-WAG (WW) ALTERNATING QUAD FLASH (AQF)
Halogen directional warning power with a choice of flash patterns and user-friendly control, the Safety Director™is the ideal product to steer traffic away from work zones and other dangerous situations.
Features:• 8 user selectable flash patterns signal traffic to avoid hazards• Hi/Lo intensity switch• Temp range -30˚c to +50˚c• 2 year warranty
Approvals:• SAE J845 Class 2
3000 Series Halogen Safety Director™
• Bar size: 1204mm L x 124mm D x 74mm H
• Bar size: 1207mm L x 64mm D x 58mm H
HAZARD SYSTEMS CATALOGUE 2007/200824
ROTATING MINIBARS & BEACONS
40cm BLAZE™ MINIBAR
This compact 40cm minibar features low noise, belt-drive rotatorincorporating free-form reflectors.
Features:• Low profile, high performance minibar• Unique free-form optics rotator modules
provide high intensity light output• Vacuum magnet version features 2 factory
fitted vacuum magnets and 17’ straightcigarette cord with plug
• 2 year warranty on minibar(bulb 90 days)
• Temp range -30˚c to +50˚c
Approvals:• SAE J845 Class 1 (amber, blue and red only) • CE, e
Blaze™ Rotating Minibar
Lens Colours:
AMBER
BLUE
CLEARC
RED
Available in a range of base mountings and height profiles, thesebeacons feature smooth and quiet belt driven rotators incorporatingfree-form optical reflectors to maximise beam pattern and output.
Features:• Polycarbonate base and twist-on lens with locking screw• Unique free-form optics rotator modules
provide high intensity light output• 1 year warranty on rotator (bulb 90 days)• Temp range -30˚c to +50˚c
Approvals:• SAE J845 Class 1 • IP Rating 54
• E Approved to EC R65 • CE, e
Rotating Beacon
Lens Colours available:AMBERBLUERED
Replace X with desired colour: R = Red, B = Blue, A = Amber, C = Clear
PART NUMBER VOLTAGE AMPS FPM
822-001X 12 10.5 A 480
822-002X 24 5.8 A 480
Chassis
ROTATING BEACON
Replace X with desired colour: R = Red, B = Blue, A = Amber
PART NUMBER VOLTAGE AMPS FPM MOUNTING FEATURES
822-003X 12 / 24 5.2 / 2.6 160 3 Bolt Mount
822-004X 12 / 24 5.2 / 2.6 160 Magnetic Mount
STROBE BEACONS & POWER PACKS
STROBE BEACONS & POWER PACKS 25
6700 Series Strobe Beacon
DOUBLE / QUAD FLASH
Replace X with desired colour: R = Red, B = Blue, A = Amber, G = Green, C = Clear
PART NUMBER PROFILE VOLTAGE AMPS JOULES FPM
820-001X Low 12 - 24 2.5 10 Dble or 16 Quad 80 Dble or 65 Quad
820-002X Medium 12 - 24 2.5 10 Dble or 16 Quad 80 Dble or 65 Quad
819-0012 Head Quad Flash UnitSupplies 20 Watt to 2 Strobe HeadsDual Voltage 165 x 100 x 38mm
819-0024 Head (Double and Quad) Flash UnitSupplies 50 Watt to 4 Strobe Heads With 14 Selectable Flash PatternsDual Voltage 140 x 65 x 168mm
819-0034 Head (Double, Quad and Quin) Flash UnitSupplies 80 Watt to 4 Strobe Heads With 8 Selectable Flash PatternsDual Voltage 140 x 65 x 168mm
819-0046 Head (Double, Quad, Quin and Mega) Flash UnitSupplies 60 Watt to 6 Strobe Heads With 32 Selectable Flash PatternsDual Voltage 140 x 65 x 168mm
8 Head Power Packs also available upon request
Strobe Power Packs FLASH RATES: Double 170 Flashes p/minute Quin 140 Flashes p/minuteQuad 140 Flashes p/minute Mega 140 Flashes p/minute
Designed to meet all the harsh operational requirements of heavy mobile equipment.Both versions of the 6700 Series strobe are built to withstand the toughest applications,severe vibration, pressure washing and steam cleaning. Power supplies are completelyencapsulated in epoxy resin and feature the patented i.beam®flash technology to monitor circuit board and flashtube operation.
Features:• Circuit board is completely encapsulated in epoxy resin for
protection against moisture, dust and vibration• Powder coated aluminium base• i.beam® LED diagnostic indicator• Thread-on polycarbonate lens and snap-fit flashtube allows
easy field service without tools• Consistent operation during voltage and temperature changes• 2 year warranty on strobe (flashtube 6 months)• Temp range -30˚c to +50˚c
Approvals:• AMECA certified to SAE J845 Class 2 (amber and clear only)
• IP Rating 66 • CE, e
Lens Colours available:AMBER GREENBLUE CLEARCRED
HAZARD SYSTEMS CATALOGUE 2007/200826
STROBE & HALOGEN WARNING LIGHTS
*Approved school bus lights. Replace X in part numbers with desired colour.
823-001A*823-001X
Halogen Flush Mount Lamp 12 VDC 35w145 x 115 x 80mm
821-013X Strobe Grille or Bumper Mount Lamp 12 to 24 VDCRectangular Power Pack Required 160 x 120 x 60mm
823-002A*823-002X
Halogen Flush Mount Lamp 24 VDC 35w145 x 115 x 80mm
821-001X Strobe Flush Mount Lamp 12 to 24 VDCPower Pack Required 145 x 115 x 80mm
823-003A*823-003X
Halogen Surface Mount Lamp 12 VDC 35w145 x 115 x 80mm
823-004A*823-004X
Halogen Surface Mount Lamp 24 VDC 35w145 x 115 x 80mm
821-002X Strobe Surface Mount Lamp 12 to 24 VDCPower Pack Required 145 x 115 x 80mm
823-005A*823-005X
Halogen Window Mount Lamp 12 VDC 35w145 x 115 x 80mm
823-006A*823-006X
Halogen Window Mount Lamp 24 VDC 35w145 x 115 x 80mm
821-003X Strobe Window Mount Lamp 12 to 24 VDCPower Pack Required 145 x 115 x 80mm
823-013X Halogen Grille or Bumper Mount Lamp 12 VDC 55wRectangular 150 x 40 x 65mm
823-014X Halogen Grille or Bumper Mount Lamp 24 VDC 70wRectangular 150 x 40 x 65mm
821-005X Strobe Grille or Bumper Mount Lamp 12 to 24 VDCRectangular Power Pack Required 150 x 40 x 65mm
823-015X Halogen Grille or Bumper Mount Lamp 12 VDC 55wOblong 80 x 65 x 45mm
823-016X Halogen Grille or Bumper Mount Lamp 24 VDC 70wOblong 80 x 65 x 45mm
821-006X Strobe Grille or Bumper Mount Lamp 12 to 24 VDCOblong Power Pack Required 80 x 65 x 45mm
823-017X Halogen Grille or Bumper Mount Lamp 12 VDC 55wOval 60 x 50 x 55mm
823-018X Halogen Grille or Bumper Mount Lamp 24 VDC 70wOval 60 x 50 x 55mm
821-007X Strobe Grille or Bumper Mount Lamp 12 to 24 VDCOval Power Pack Required 60 x 50 x 55mm
823-019X Halogen Grille or Bumper Mount Lamp 12 VDC 55wRectangular 160 x 120 x 60mm
823-020X Halogen Grille or Bumper Mount Lamp 24 VDC 70wRectangular 160 x 120 x 60mm
Scene Light Flush Mount Clear 12 VDC823-011CC
27HEADLIGHT & SCHOOL BUS FLASHERS
HEADLIGHT & SCHOOL BUS FLASHERS
882-001School Bus Flasher Solid State 4 Lamp 12 VDCAutomatic on when a door is open20 second shut off timer when doors close
882-002School Bus Flasher Solid State 4 Lamp 24 VDCAutomatic on when a door is open20 second shut off timer when doors close
882-003School Bus Flasher Solid State 4 Lamp 12 VDCIncludes failure detection and manual mode
882-004School Bus Flasher Solid State 4 Lamp 24 VDCIncludes failure detection and manual mode
882-005School Bus Flasher Solid State 4 Lamp 12 VDCLow Beam
882-006School Bus Flasher Solid State 4 Lamp 24 VDCLow Beam
882-902 Harness to suit 882-001 and 882-002
882-904 Pilot Lamp 12 VDC
882-906 Magnetic Reed Switch for Door Sensor
882-907 Toggle Switch
882-905 Pilot Lamp 24 VDC
882-903 Harness to suit 882-005 and 882-006
See page 26 for approvedschool bus lights
882-920 (12V) 882-920-24 (24V)
COMPLETE SCHOOL BUS KITS (excluding lights)
TAS Incl. Flashers, Signage, Switch and Harness
882-921 (12V) 882-921-24 (24V)VIC Incl. Flashers, Signage, Switch and Harness
882-922 (12V) 882-922-24 (24V)NSW Incl. Flashers, Signs, Switch, Lights and Harness
882-923 (12V) 882-923-24 (24V)QLD Incl. Flashers, Signage, Switch and Harness
882-924 (12V) 882-924-24 (24V)SA Incl. Flashers, Signage, Switch and Harness
HAZARD SYSTEMS CATALOGUE 2007/200810
HEADLIGHT & SCHOOL BUS FLASHERS
HAZARD SYSTEMS CATALOGUE 2007/200828
882-910Sign School 400mm x 400mmwith 25km/h Speed Limit
886-001Alternating Flasher 12 VDC 60 watts Per SideSingle pattern
886-009Headlight Flasher with Auxiliary Option 12 VDCHeavy Duty
886-010Headlight Flasher with Auxiliary Option 24 VDCHeavy Duty
886-002Alternating Flasher 24 VDC 60 watts Per SideSingle pattern
882-908 Sign School 345mm x 205mm
882-909 Sign School 400mm x 305mm
882-911 Sign 40km/h Large 440mm x 440mm
882-912 Sign 40km/h Small 400mm x 250mm
882-913 Sign “When Lights Flash” 900mm x 80mm
882-914 Sign “School Bus” 900mm x 150mm
29REVERSING CAMERA KITS
REVERSING CAMERAS
2 YEAR WARRANTY*
2
140-520 Reversing Camera KitNew from Hazard Systems, these reversing camera kits are designed to preventcostly accidents, eliminate workplace injury and help to save lives.
The perfect system for your vehicle:This compact monitor and camera is ideal forcommercial and emergency applications.Incorporating premium quality andinnovation, the camera and monitorkit is manufactured to the highestquality standards and featuresrenowned Sony CCD technology.
Whatever your safety requirements theHazard Systems Reversing Camera Kit willhelp to maximise visibility and enhance yoursafety on and off road.
140-520 Reversing Camera Kit contains:• 5.6” TFT LCD Colour Display• Colour Camera with Built-In Controller• 20 Metre Weatherproof Cable, Fitting Kit
and Instructions
COLOUR CAMERA
18 IR LEDs for high definition night vision. Aluminium alloycamera housing for exceptional corrosion resistance.
Incorporates a light sensor that switches to high definitionblack and white image in low light.
Includes microphone and external cable connection.
Resolution (pixels): 500(H) x 582(V)
Power consumption: ≤1.5W
Mechanical vibration: 8G
Image: 1/4” CCD
Lens angle: 110° (diagonal)
Weight: 425g
Dimensions (mm): 82(L) x 73(W) x 58(D)
Operating temp: -30° to +65° C
Plug: 4 pin
IP rating: 168
5.6” TFT LCD DISPLAY
Built in controller. Maximum 2 cameras.
Menu is workable even if under mirror image condition.
Includes a built-in speaker.
Screen Size: 5.6" colour
Volts: 12-24V DC
Power consumption: 5W
Mechanical vibration: 3G
Audio: Yes
Mirror/normal image switch: Yes
Weight including stand: 490g
Dimensions (mm): 165(L) x 115(W) x 29(D)
Operating temp: -15°C to +65°C
Day/night sensor: Yes
HAZARD SYSTEMS CATALOGUE 2007/200830
ACCESSORIES & REPLACEMENT PARTS
LAMP ASSEMBLIES
Replace X with desired colour:R = Red, B = Blue, A = Amber, G = Green, C = Clear (where applicable)
PART NUMBER DESCRIPTION
209-908 Rotator Assembly Fast 150FPM 12v to suit 20/30 series lightbars209-909 Rotator Assembly Slow 90FPM 12v to suit 20/30 series lightbars209-910 Rotator Assembly Fast 150FPM 24v209-911 Rotator Assembly Slow 90FPM 24v209-912 Cleversector Left to suit 10/20 series lightbars (12 volt only available)209-913 Cleversector Right to suit 10/20 series lightbars (12 volt only available)209-917 Halogen alley/take down lights to suit 10/15/20/30 series lightbars209-918X Lens to suit alley/take down light (Replace X with colour A/B/R)909-922 Linear strobe tube assembly to suit 20/30/90 series lightbars909-923 Directional strobe head to suit 20/30/90 series lightbars909-933 Microbeam ripple light to suit 12v to suit 90 series lightbars909-934 Microbeam ripple light to suit 24v to suit 90 series lightbars
BEACON LENS
PART NUMBER DESCRIPTION
822-901X Lens to suit 822-003/4 revolving beacons820-901X Lens to suit 822-001 strobe beacon822-903X Lens to suit 822-001/2 Evolution bars
LED MODULES & DRIVERS
PART NUMBER DESCRIPTION
109-924X Front/rear LED lighthead to suit 10/15/20/30 series lightbars109-938X Corner LED lighthead (3 modules) to suit 10/20 series lightbars 159-938X Corner LED lighthead to suit 15/30 series lightbars909-924X-M Front/rear LED lighthead to suit 90 series lightbars909-924X-E End LED lighthead to suit 90 series lightbars209-937-4 4 head LED driver to suit 10/15/20/30/90 series lightbars209-937-8 8 head LED driver to suit 10/15/20/30/90 series lightbars209-937-20 20 head LED driver to suit 10/15/20/30/90 series lightbars
GLOBES
PART NUMBER DESCRIPTION
899-901 12v 55 watt H1 Halogen globe899-902 24v 70 watt H1 Halogen globe899-903 12v 35 watt H3 Halogen globe899-904 24v 35 watt H3 Halogen globe889-905 12v 20 watt BA15s sign light globe899-906 24v 20 watt BA15s sign light globe899-909 12v 55 watt 795 globe to suit Hazard rotators899-910 24v 70 watt 795 globe to suit Hazard rotators899-911 12v 35 watt Bi-pin globe to suit Hazard bus lights899-911-5 12v 35 watt Bi-pin globe to suit Hazard bus lights (packet of 5)899-912 24v 35 watt Bi-pin globe to suit Hazard bus lights899-913 Strobe tube to suit 909-923 directional strobe head899-914 Linear strobe tube to suit 909-923 Linear strobe assembly889-915X Remote strobe flash tube 25mm hole mount (power pack required)899-916 Strobe tube to suit 820-001 series strobe beacons
209-908 209-912
159-938 209-937
209-917 209-918A
899-903 899-905
899-913 899-909
899-901
31ACCESSORIES & REPLACEMENT PARTS
ACCESSORIES & REPLACEMENT PARTS
Replace X with desired colour: R = Red, B = Blue, A = Amber, W = White, C = Clear (where applicable)
LENS SCREW/CLIPS/DIVIDERS
PART NUMBER DESCRIPTION
109-927 10/15 series Lightbars Lens retaining clip209-927 20/30 series Lightbars Lens retaining clip109-942 10 series Lightbars Lens retaining screw159-942 15 series Lightbars Lens retaining screw309-942 30 series Lightbars Lens retaining screw209-921 Centre section spring clip 20/30 series Lightbars909-925 Lens Divider to suit 90 series Lightbars
SPEAKER TIPS & FLARES
PART NUMBER DESCRIPTION
220-0321-00 Speaker Re-entrant tip Black220-0318-00 5" round ABS plastic flare black220-0319-00 5" x 8" rectangular black ABS plastic flare220-0259-00 Bugle horn blackK100B Repair kit for 100 driver
909-931XALL MODELS
END CAP
909-932X
END CAP WINDOW FRONT / REAR RIPPLE
909-940X
109-942Includes Washer
159-942Includes Washer209-921
824-901SW4R
309-942Includes Washer
209-927
90 SERIES
109-901XALL MODELS
END
UPPER
209-902C
LOWER
109-904X
SHORT (260mm)
MID / CENTRE
UPPER
209-905C
LOWER
109-906X
LONG (390mm)
UPPER
209-907C
159-901XALL MODELS 309-902C 109-904X 209-905C 109-906X 209-907C
LOWER
15 SERIES
209-901XALL MODELS 209-902C 209-904X 209-905C 209-906X 209-907C
20 SERIES
309-901XALL MODELS 309-902C 209-904X 209-905C 209-906X 209-907C
30 SERIES
LIGHTBAR LENS
SWITCHES
PART NUMBER DESCRIPTION
SW3R Switch Panel 3 rocker switchesSW4R Switch Panel 4 rocker switchesSW6R Switch Panel 6 rocker switches824-901 Safety Director control box
220-0318-00220-0321-00 220-0319-00
10 SERIES
HAZARD SYSTEMS CATALOGUE 2007/200832
GUTTER MOUNT BRACKET SELECTION
9HK-0121-08 1000
12001200
na120012001200120012001200120012001200120012001200107010701070
12001200120010701200133012001330120013301330133010701330120012001200
12001200120013301460120013301200
na13301460146013301460133012001200
12001330
1200 (1070)1070107012001720146013301070
1590120013301070133012001460
1200
1200
1200
na: not available
Courier PGEscapeFalcon AU/BA SedanFalcon AU/BA Sedan TaxiFalcon AU/BA Sedan XR6/XR8Falcon AU/BA/BF UteFalcon AU/BA/BF WagonFalcon AU/BA/BF WagonFalcon AU/BA Wagon TaxiFalcon BF SedanFocus Sedan and HatchFocus Sedan and HatchF-250 F-350F250 Extra CabRanger Single/Super CabRanger Dual CabTransit Van VH/VJTerritoryAstra TS/AH Sedan and HatchAstra TS/AH (Rail Mount)Adventra (Rail Mount)Commodore VE Sedan / StatesmanCommodore VT/VX/VY/VZ SedanCommodore VT/VX/VY/VZ/VECommodore VU/VY/VZ/VE UteCrewman VY/VZFrontera MXJackaroo L8Rodeo RAAccentExcel X3GetzSanta FeSonata380Challenger PALancer CE Sedan/WagonMagna TL Sedan/WagonPajero NPTriton MKMurano STNavara D22 MY2002 Dual CabNavara D40PathfinderPatrol GU and GU IIPulsar N16X TrailAvalonAvensisCamry Sedan (20 Series)Camry Sed/Camry Wag(36 Series)Camry SedanCorollaEchoHiace SWBHiace LWB (Low Roof)Hilux MY02/MY03
KlugerPriusLandcruiser Cab Chassis (70 series)Landcruiser Cab Chassis (78 series)Landcruiser Troop Carrier (78 Series)Landcruiser (100 series)Prado (120 Series)Rav 4 (20 Series)Rav 4 (Not compatible with roofTaragoTaragoTownaceYarisDaewoo KalosDaewoo NubiraHonda JazzIsuzu NPRIsuzu NKR SeriesMazda BravoMercedes A ClassMercedes Vito Low RoofMercedes Sprinter 208CDI (LowChrysler PT CruiserChrysler VoyagerSubaru Impreza WRXSuzuki Grand VitaraSubaru ForesterVolkswagen Transporter
Hilux All Cabs
FORD
MODELMAKE SERIESSTART YEAR
SERIESEND YEAR
KITPART NO.
10-15-20-30 SERIES
2002
FOOTWIDTH (mm)
111012401240
1240124012401240
124011101240
124012401760124011101200
1100 (1240)1240124012401240124011101240
1110 (1240)11101110111011101240
1110 (1240)
1110124013701240124012401240124013701110137012401240111012401240124012401370
1370 (1500)12401240111012401240137013701370137012401240
1100 (1240)12401240137011101110111012401760137012401110
1500 (1630)1110137011101240
1100 (1240)1370
1240
1500
120012001200
1200120012001200
1200107012001460
10/20 SERIESLENGTH (mm)
15/30 SERIESLENGTH (mm)
9HK-0119-02
9HK-0120-019HK-0120-019HK-0120-019HK-0120-019HK-0120-02na9HK-0120-029HK-0120-039HK-0122-019HK-0122-01
9HK-0332-009HK-0119-159HK-0119-15na9HK-0123-029HK-0121-24na
9HK-0121-349HK-0121-049HK-0122-029HK-0121-049HK-0121-05
9HK-0121-069HK-0119-119HK-0119-05
9HK-0119-06
9HK-0121-309HK-0121-279HK-0121-11
9HK-0122-08
9HK-0119-079HK-0121-289HK-0121-289HK-0121-149HK-0119-129HK-0149-009HK-0119-089HK-0121-319HK-0121-169HK-0119-099HK-0121-329HK-0121-37
9HK-0122-199HK-0119-109HK-0121-20nana9HK-0121-239HK-0122-139HK-0122-13
9HK-0121-199HK-0122-159HK-0121-259HK-0121-26
9HK-0121-399HK-0121-389HK-0119-13
220-0121-299HK-0122-059HK-0121-36220-0119-14
9HK-0122-07
9HK-0121-359HK-0118-02
960
1340
930
1030
980960
10201040
980
960
10201000
1200
114011401140
11001100
10001100
960
12501100
1150
9HK-0124-04
9HK-0122-20
9HK-0122-18
9HK-0118-03
KITPART NO.
FOOTWIDTH (mm)
1230
12301000123012301230
1000123012301230
159012001200
12301230
12301230
1330, 12301330, 1230
12301230
13301230 (1330)
1000
123012301230
1230
1230
12301230 (1330)1230 (1330)
133010001330123012301230123012301230
143013301330
12301330133013301330123012301230
1230(1330)13301230
12301730
1430 (1330)1230
1430
123012301430
90 SERIESLENGTH (mm)
90 SERIES
2HK-0111-032HK-0111-042HK-0130-01na2HK-0130-012HK-0130-012HK-0112-022HK-0150-01*na2HK-0112-032HK-0114-022HK-0114-022HK-0113-16
2HK-0163-022HK-0111-262HK-0113-212HK-0165-022HK-0111-192HK-0111-212HK-0158-002HK-0113-262HK-0099-012HK-0114-042HK-0113-022HK-0113-032HK-0110-012HK-0113-042HK-0111-182HK-0111-072HK-0111-082HK-0111-092HK-0113-062HK-0164-042HK-0164-012HK-0111-102HK-0113-082HK-0113-252HK-0114-102HK-0115-012HK-0113-202HK-0111-122HK-0111-232HK-0111-232HK-0113-092HK-0110-042HK-0146-00*
2HK-0164-052HK-0113-112HK-0113-222HK-0164-062HK-0164-092HK-0111-142HK-0114-112HK-0164-032HK-0111-152HK-0113-172HK-0114-152HK-0110-022HK-0111-162HK-0114-122HK-0114-122HK-0115-032HK-0113-23*2HK-0113-182HK-0113-142HK-0113-242HK-0111-222HK-0113-282HK-0164-10*2HK-0111-202HK-0111-022HK-0113-012HK-0111-242HK-0114-072HK-0113-27**2HK-0163-012HK-0113-07
2HK-0114-18*2HK-0111-012HK-0114-012HK-0113-102HK-0111-252HK-0110-052HK-0115-04
20011998199819981998199819981998200620022005200120062006200620052004199819982003200619971997200020031999199820032000199420022000200620052000199620032002199620052001200620061997200020032000200119972002200620061999199820052001
2005
2003200320071999199919982003200020062000200619972005200319992002200320051999199819982000200020012002200620021992
20062006
20062006200620062006
2004
20052006
2006
200520032003
2000
200420032005
2006
20062002
2004
2005
2006
2006
200520072003
2003
20042006
2007
990
990990
1050
9609901020
1020
16101000980990
10201000
102011501080980
1040
1000970
1020
9801110840
1110102011201120114010101050115010201145
10201000100012801280
1040110011401140
12401110102010201000
1100
980980
10201620
1140
13501140
10201150
1000
980
1020
970
1040
11401040
1250
HOLDEN
HYUNDAI
MITSUBISHI
NISSAN
TOYOTA
MISC.
* Highmount bracket kit (P/N 155-0074-00) required
** Spacer kit (P/N 155-0038-00) required
FOOT WIDTH
GUTTER WIDTH
Go to www.hazard.com.au for the latest information.
GROUP PROFILE:The ECCO Group designs, manufactures and marketselectronic safety products, safety lighting and warningsystems for emergency and commercial vehicles infacilities in the USA, UK and Australia.
• ECCO started in 1972.
• Current ownership and leadership since 1985.
• ECCO Group Headquarters and 50,000 sq ft building located inBoise, Idaho.
• European Division and 33,000 sq ft building located in Leeds, England.
• Pacific Asia Division located in Launceston, Tasmania.
• Acquired Hazard Systems in 2003.
• World’s largest manufacturer of amber warning lights andback-up alarms combined.
• Industry leader in innovation and new products.
• World’s most complete range of emergency warning productsfor commercial vehicles.
• Serving over 1000 distributors globally.
• Supplying over 500 vehicle manufacturers worldwide.
ECCO® Group Headquarters, Boise, Idaho, USA
Pacific Asia Division,
Launceston, Tasmania, Australia
European Division, Leeds, England
1
2
3
33ECCO GROUP - COMPANY PROFILE
Hazard Systems Pty Ltd
PO Box 1509, Launceston 7250Tasmania, Australia
Freecall: 1800 815 000
Telephone: (03) 6332 2444
Facsimile: (03) 6332 2490
Email: [email protected]
Internet: www.hazard.com.au