Hughes Emergency Safety Showers & Eyebaths - Definitive Catalogue
EMERGENCY SHOWERS AND EYEWASHES
Transcript of EMERGENCY SHOWERS AND EYEWASHES
EMERGENCY SHOWERSAND EYEWASHES
IND
EX
Reproduction in whole orpart of this catalog by anymedia is prohibited withoutexpress permission ofCARLOS ARBOLES, S.A.
44
SPARE PARTSSPARE PARTS
42434343
INSTALLATION ANDMAINTENANCE INSTRUCTIONS
INSTALLATIONOPERATIONMAINTENANCESIGNS
3839394040414141
ACCESSORIESTEMPERED WATERTEMPERATURE PROTECTIONPRESSURE PROTECTIONBOOTH STRUCTURESHOWER PLATFORMSHOWER TESTWALL SUPPORTALARM KIT
3637
TANK SHOWERSOVER HEAD TANKUNDERGROUND TANK
SELF-DRAINING SHOWERS ANDEYEWASHES
PLATFORMSFLOOR MOUNTINGDECONTAMINATION BOOTHUNDERGROUNDFLOOR MOUNTINGINTERIOR WALL MOUNTINGUNDERGROUND PLATFORM
28 - 29 - 313031
32 - 353334
12 - 34 - 56 - 7
TECHNICAL INFORMATIONPRESENTATIONCERTIFICATESDESIGN AND MANUFACTURINGTECHNICAL CHARACTERISTICS
8 - 111213
EMERGENCY SHOWERSAND EYEWASHES
FLOOR MOUNTINGWALL MOUNTINGRECESSED MOUNTING
1415
16 - 171819
EMERGENCY EYEWASHESWALL MOUNTINGFLOOR MOUNTINGTABLE MOUNTINGDRENCH HOSE EYEWASHESRECESSED MOUNTING
2021212223
EMERGENCY SHOWERSFLOOR MOUNTINGCEILING MOUNTINGWALL MOUNTINGOVER DOOR MOUNTINGRECESSED MOUNTING
24252627
STAINLESS STEEL SHOWERSAND EYEWASHES
SHOWERS AND EYEWASHESSHOWERSEYEWASHESPLATFORMS
1
GEN
ERA
L CA
TALO
GU
E 20
18
SAFETY EQUIPMENT
Since 1929 , Arboles manufactures tapfittings of diverse types and applications;we now specialise in two product lines:• EMERGENCY SHOWERS AND EYEWASHES• TAP FITTINGS FOR LABORATORIES
CARLOS ARBOLES, S.A. is certified toISO 9001, and all the products manufac-tured in the company are made under strictquality standards.
Since 1976 we have been supplying theinternational market with a full range ofEmergency Equipment. In this cataloguewe show our current models.
The Emergency Showersand Eyewashes instantlyoffer water as a FIRST AIDtreatment to people whohave been exposed to: fire,acids, reagents, radioactivematerials, and other contami-nants that might cause seriousor irreparable injury.This is the most inexpensive and effective method todate for decontamination.
AMERICAN STANDARDAt the international level, the American standardANSI/ISEA Z358.1-2014 is recognized worldwide forEmergency Showers and Eyewashes.The following is the certificate of compliance issued by theCSA Institute.
2 3
CERT
IFIC
ATES
others: the flow to be supplied by the EmergencyEquipment, the distribution of the water patternon the body, the dimensions of the facility andthe operating elements, signs and accessibilityaspects.
CARLOS ARBOLES, S.A. designs and manufacturesEmergency Equipment complying with the currentInternational standards that ensures the user’ssafety.The requirements of these standards are, among
EUROPEAN STANDARDSThe European Standard EN 15154 applies in Europe.According to this standard, the Emergency Equipmentis divided into:• Emergency Showers used in Laboratories
EN 15154-1:2006.• Emergency Eyewashes EN 15154-2:2006.The following are the statements ofcompliance of both standards certified bythe Spanish entity APPLUS.
In Europe, the only standard for Emergency Showersused in industrial facilities is the German StandardDIN 12899-3:2007.The following is the compliance statement certifiedby the entity APPLUS.
4 5
DES
IGN
AN
D M
AN
UFA
CTU
RIN
G
CAD/CAM TECHNICAL DEPARTMENT
HYDRAULICTESTING
MECHANICALTESTING
TEST LABORATORY
NUMERIC CONTROLMACHINING
DESIGNOur technical department continually develop and improveour products, along with specially required projects.The latest CAD/CAM technology is employed for productionand PROTOTYPING of components.These prototypes are validated in our test LABORATORY.Strict mechanical and hydraulic tests are performed in thelaboratory, which guarantee the functionality of the designsin emergency situations.
CARLOS ARBOLES, S.A. has its own design and manufacturingteam for Emergency Equipment that develops, innovates and improvesits products.
MANUFACTURINGThe manufacturing process uses high-precision numerical control lathes andmachining centers specifically designed for the production of tap fittings.High-performance ovens heat the parts between 300º C and 450º C to later dipthem in polyamide 11 powder tanks, where the powder is melted and adheres tothe part.After the anti-corrosive coating process, the assembly line finishes themanufacturing process with 100% watertight control of the parts. Throughout theprocess, the Quality department checks the manufacturing parameters.
PRODUCTS ARE 100% LEAK TESTED
ANTI-CORROSIVE PLASTIC COATING
CNC MACHINING
INTERNATIONAL STANDARDSOur products meet or exceed the requirements:
APPLUS and CSA Institute of Certifications.
• ANSI Z358.1 • EN 15154 1 and 2 • DIN 12899.3
TEMPERATURE PROTECTIONIn order to prevent freezing or excess temperature in the pipes, we offer different
solutions:• Automatic drain valves
to avoid pipe freezing.• Temperature protection
valves, that create ableed line when thetemperatures of thesupply piping are extreme.
• Thermostatic valve for thesupply of tempered water.
8
HIGH-VISIBILITY SIGNALLINGThe Emergency Equipment includes:
• A photoluminescence signaling plate with a green background and white text.Dimensions: 210 x 297 mm
• Maintenance table and installation instructions.• Optionally, an ALARM that may provide a visual and sonorous signal when the
Equipment is operated.
10
ANTI SEIZE VALVEThe Showers and Eyewashes include valves that are specifically designed to be
used in emergency situations, since they do not become obstructed nor do they stickup after long periods of inactivity.Optimal results after more than 100,000 cycles.
7
FLOW RATEREGULATIONOur valves regulate the
water flow, regardless ofthe inlet pressure.The Showers are regulatedat 110 l/min, and theEyewashes at 22 l/min.Recommended pressure:2 bar.Maximum pressure: 4 bar or8 bar depending on equipment.Please notify us if your equipment will operate at pressures lower than 1.5 bar.
9
6 7
TECH
NIC
AL
CHA
RACT
ERIS
TICS
4
5
3,25"
1,25"
150
mm
6
2
1
3
9
10
8
7
700
mm
20"20"
50 % - 800 mm
50 % - 400 mm
60"
20"
EMERGENCY SHOWERS AND EYEWASHESCARLOS ARBOLES, S.A. supplies high quality Showers andEyewashes that are extremely reliable.The following are the main technical characteristics that distinguishour products.
EN STANDARD
ANSI STANDARD
HIGH QUALITY MATERIALSMaterials in contact with water are galvanized
steel pipes, brass fittings and ABS reinforced plastic.We also have the ability to manufacture equipmentin stainless steel .
1
2 ROBUST CONSTRUCTIONAll our products are constructed from high quality
materials, where fastening is surface mounting thecomponents are always metallic.This results into a robust equipment for the mostadverse conditions.
SHOWER HEAD• The water distribution pattern is in accordance
to all relevant standards to give a wide and smooth flow pattern.
• The large Shower head diameter of 250 mm and the design of the flow holes prevent restrictedflow caused by lime scale or contamination.
3
5 EYEWASH ASSEMBLYOne or two spray heads offer a low pressure aerated water, which flushes the face and the eyes without
damaging the delicate eye tissues.The large-diameter jet reaches a 15 cm height, according to the standard. The plastic materials and roundedforms will not cause facial damage in the case of accidental contact. They include an anti-dust cover whichoperates automatically when the Eyewash unit is activated.
ANTI-CORROSIVE AND ENVIRONMENTAL COATINGAnti-corrosive polyamide 11 plastic coating, in HIGH-VISIBILITY YELLOW color. This plastic coating has
a thickness of 250 to 300 microns. It has good resistance to acids, bases, sea water, oils...The coating is not derived from petroleum, but is a raw material originating from vegetable oil, and therefore,it preserves the environment.We have a Chemical Resistance Table, which can be consulted on our website: www.carlosarboles.com.
6
FULL RANGEWe have different models based on their
installation, WALL, FLOOR, or TABLE mounted.The equipment is supplied disassembled, itsassembly is easy and unmistakable.We have different types of mechanisms:• Shower with a pull handle or lever.• Automatic opening and closing when entering
and leaving the platform.• Eyewash with a push lever, pedal, or platform operation.
4
29
5,3
10,6
15,9
21,1
26,4
31,7
5,8
gpm
110
0
20
40
60
80
100
120
22
l/min
EYEWASHESSHOWERS
0 1 2 3 4 5 6 7 8 bar1,5
RECOMMENDEDMINIMUM MAXIMUM
15 30 45 60 75 90 100 115 psi20
MOD. 4220
DIMENSIONS IN MM
25041
5
605
ø 250
SUPP
LY G
1" 1
/4
ø 250
2100
190
1135
1635
150
WASTEG 1" 1/4
760
MOD. 4230 SS
EMER
GEN
CY S
HO
WER
S A
ND
EYE
WA
SHES
8 9
SHOWER VALVE Full bore 1", regulated at 110 l/min, instant opening and manualclosing.EYEWASH OPERATION Push handle.EYEWASH HEADS Two high-flow aerated water spray heads at low pressurewith automatic opening anti-dust cover.EYEWASH VALVE Full bore 1/2", regulated at 22 l/min, instant opening andmanual closing.
THE UPDATE OF OUR MODELSIS ON THE WEBSITEwww.carlosarboles.com
GENERAL FEATURESMATERIALS Galvanized steel piping. Brass fittings.COATING Anti-corrosive polyamide 11 in high-visibility yellow.DOUBLE WATER INLET G 1" 1/4 BSP.WATER INLET PRESSURE Recommended 2 bar. Minimum 1.5 bar.Maximum 8 bar.SHOWER OPERATION Pull handle.
USEThe following models combine the Shower and the Eyewash in oneSafety Equipment for outdoor and indoor facilities, minimizing therequired space, and using a single water inlet for both equipments.
MOD. 4250
FLOOR MOUNTINGSHOWER
HEAD/BOWLABS
SHOWERHEAD/BOWL
STAINLESS STEEL
MOD
ELS
PULL ROD SHOWER,PUSH HANDLEEYEWASH
4220 4220 SS
PULL ROD SHOWER,PUSH HANDLEEYEWASH INCLUDESSPRAY UNIT MOD. 3000
4230 4230 SS
FLOOR MOUNTINGSHOWER
HEAD/BOWLABS
SHOWERHEAD/BOWL
STAINLESS STEEL
MOD
ELS
PULL ROD SHOWER, PUSH HANDLEAND FOOT TREADLE EYEWASH4250 4250 SS
PULL ROD SHOWER, PUSH HANDLEAND FOOT TREADLE EYEWASHINCLUDES SPRAY UNIT MOD. 3000
4255 4255 SS
EMER
GEN
CY S
HO
WER
S A
ND
EYE
WA
SHES
10 11
GENERAL FEATURESMATERIALS Galvanized steel piping. Brass fittings.COATING Anti-corrosive polyamide 11 in high-visibility yellow.DOUBLE WATER INLET G 1" 1/4 BSP.WATER INLET PRESSURE Recommended 2 bar. Minimum 1.5 bar.Maximum 8 bar.SHOWER OPERATION Pull handle.
USEThe following models combine the Shower and the Eyewas in oneSafety Equipment for outdoor and indoor facilities, minimizing therequired space and using a single water inlet for both equipments.
SHOWER VALVE Full bore 1", regulated at 110 l/min, instant opening and manualclosing.EYEWASH OPERATION Push handle or foot treadle.EYEWASH HEADS Two high-flow aerated water spray heads at low pressurewith automatic opening anti-dust cover.EYEWASH VALVE Full bore 1/2", regulated at 22 l/min, instant opening andmanual closing.
THE UPDATE OF OUR MODELSIS ON THE WEBSITEwww.carlosarboles.com
MOD. 4260
DIMENSIONS IN MM
25041
5
605
ø 250
SUPPLY G 1" 1/4
2100
310
1070
150
SUPPLY G 1" 1/4
FLOOR MOUNTING
PULL ROD SHOWER,PUSH HANDLEEYEWASH WITHOUTBOWL
SHOWER HEADABS
SHOWER HEADSTAINLESS STEEL
4260 4260 SS
MOD
ELS
LOW CEILINGLow ceiling Shower and Eyewash combination hasbeen designed for areas with a heigth limitation.
DIMENSIONS IN MM
DIMENSIONS IN MM
REDUCED MOBILITYReduced mobility Shower and Eyewash combinationhas been designed for disabled people or wheelchairaccess.
MODEL 4221PULL ROD SHOWER, PUSH HANDLE EYEWASH,SHOWER HEAD/BOWL ABS, LOW CEILING
MODEL 4221 SSPULL ROD SHOWER, PUSH HANDLE EYEWASH,SHOWER HEAD/BOWL STAINLESS STEEL,LOW CEILING
MODEL 4225PULL ROD SHOWER, PUSH HANDLE EYEWASH,SHOWER HEAD/BOWL ABS, REDUCED MOBILITY
MODEL 4225 SSPULL ROD SHOWER, PUSH HANDLE EYEWASH,SHOWER HEAD/BOWL STAINLESS STEEL, REDUCEDMOBILITY
MOD. 4221 MOD. 4225
2315
510
2150
ø 250
1135
1635
150
WASTEG 1" 1/4
SUPPLYG 1" 1/4
ø 250
1500
165
2265
735
2100
ø 250
960
150
WASTEG 1" 1/4
SUPPLYG 1" 1/4
ø 250
1185
685
330
1315
DIMENSIONS IN MM
1450
660
ø 250
SUPPLY G 1"
760
MOD. 4285
MOD. 4295
MOD. 4290
WALL MOUNTING
MOD
ELS
SHOWERHEAD ABS
4280
4285
4290
4295
PULL ROD SHOWER, PUSH HANDLEEYEWASH WITHOUT BOWL
SHOWER HEADSTAINLESS STEEL
4280 SS
4285 SS
4290 SS
4295 SS
PULL ROD SHOWER, PUSH HANDLEEYEWASH
PULL ROD SHOWER, DRENCH HOSEEYEWASH
PULL ROD SHOWER, DRENCH HOSEDOUBLE EYEWASH
MOD. 4275
MOD. 4275
DIMENSIONS IN MM
ø 250
399
ACC
ORD
ING
TO
INST
ALL
ATIO
N
SUPPLYG 1"
OPTIONALPIPE
358
150
200
MOD
ELS
SHOWER HEADSTAINLESS STEEL
RECESSED MOUNTINGSHOWER
HEAD ABS
RECESSED SHOWER ANDEYEWASH, PULL RODSHOWER, OPENING BOXEYEWASH
4275 SS4275
12 13
EMER
GEN
CY S
HO
WER
S A
ND
EYE
WA
SHES
WALL MOUNTING USEThe following models combine the Shower and the Eyewash in oneSafety Equipment for outdoor and indoor facilities, minimizing the requiredspace, and using a single water inlet for both equipments,
RECESSED MOUNTING USEIndoor Safety Equipment recessed in the wall. Emergency Shower startsoperating when you lower the lever and Eyewash starts operating whenyou opening stainless steel door.
GENERAL FEATURESMATERIALS Galvanized steel piping. Brass fittings.COATING Anti-corrosive polyamide 11 in high-visibility yellow.WATER INLET G 1" BSP.WATER INLET PRESSURE Recommended 2 bar. Minimum 1.5 bar.Maximum 8 bar.WATER INLET PRESSURE MOD. 4275 3 bar.
SHOWER OPERATION Pull handle or cabinet lever.SHOWER VALVE Full bore 1", regulated at 110 l/min, instant opening and manual closing.EYEWASH OPERATION Push handle or cabinet handle.EYEWASH HEADS Two high-flow aerated water spray heads at low pressure with automaticopening anti-dust cover.EYEWASH VALVE Full bore 1/2", regulated at 22 l/min, instant opening and manual closing.EYEWASH VALVE MOD. 4275 Flow 20 l/min at 3 bar, instant opening and manual closing.INSTALLATION Height assembly see pag. 42.
THE UPDATE OF OUR MODELSIS ON THE WEBSITEwww.carlosarboles.com
MOD. 3820
MOD. 2710
FLOOR MOUNTINGBOWL ABS BOWL STAINLESS STEEL
MOD
ELS PEDESTAL EYEWASH
EYEWASH WITH DRENCH HOSE MOD. 3000
EYEWASH DOUBLE CONTROL HANDLE/TREADLE
2220 2220 SS
2240 2240 SS
2710 2710 SS
DIMENSIONS IN MM
890
ø 250 SUPPLY G 1/2"
1100
150
WASTEG 1" 1/4
190
ø 228
MOD. 2220
14 15
EMER
GEN
CY E
YEW
ASH
ESGENERAL FEATURESMATERIALS Galvanized steel piping. Brass fittings.COATING Anti-corrosive polyamide 11 in high-visibility yellow.WATER INLET G 1/2" BSP.WATER INLET PRESSURE Recommended 2 bar. Minimum 1.5 bar.Maximum 8 bar.
USEIn outdoor or indoor facilities the Eyewashes are activatedby pushing the lever.
MOD. 3510
MOD. 2210 DIMENSIONS IN MM
240
ø 250
SUPPLYG 1/2"
WASTEG 1" 1/4
190
230
EYEWASH OPERATION Push handle, foot treadle or swivel opening.EYEWASH HEADS Two high-flow aerated water spray heads at low pressure with automatic openinganti-dust cover.EYEWASH VALVE Full bore 1/2", regulated at 22 l/min, instant opening and manual closing.EYEWASH VALVE MOD. 3820 Flow 20 l/min at 3 bar, instant opening and manual closing.INSTALLATION Height assembly see pag. 42. THE UPDATE OF OUR MODELS
IS ON THE WEBSITEwww.carlosarboles.com
WALL MOUNTINGBOWLABS
BOWLSTAINLESS STEEL
MOD
ELS
WALLEYEWASH
EYEWASH WITHDRENCH HOSEMOD. 3000
EYEWASHWITHOUT BOWL
2210 2210 SS
2230 2230 SS
3510
EYEWASHSWING OUTWITHOUT BOWL
3820
DIMENSIONS IN MM
SUPPLY G 1/2"WASTEG 1" 1/4
DRILL ø 260
DRILL ø 22
220
40
ø 270
MOD. 2215 SS
MOD. 2212 DIMENSIONS IN MM
325
ø 250
SUPPLYG 1/2"
190
WASTEG 1" 1/4
390
DRILL ø 50
DRILL ø 30
100
115
TABLE MOUNTINGBOWLABS
BOWLSTAINLESS STEEL
MOD
ELS
EYEWASH
TABLE RECESSEDEYEWASH
EYEWASHWITHOUT BOWL
2212 2212 SS
2215 SS
3500
EYEWASHSWING OUTWITHOUT BOWL
SWIVELEYEWASHWITHOUT BOWL90º TURNOPENING
3620
3720
16 17
EMER
GEN
CY E
YEW
ASH
ESGENERAL FEATURESMATERIALS Galvanized steel piping. Brass fittings.COATING Anti-corrosive polyamide 11 in high-visibility yellow.WATER INLET G 1/2" BSP.WATER INLET PRESSURE Recommended 2 bar. Minimum 1.5 bar.Maximum 8 bar.WATER INLET PRESSURE MOD. 3620 - 3720 3 bar.
USESeries of Eyewashes specially designed for their installationin laboratories, directly on the work table itself.
EYEWASH OPERATION Push handle, push button or swivel opening.EYEWASH HEADS Two high-flow aerated water spray heads at low pressure withautomatic opening anti-dust cover.EYEWASH VALVE Full bore 1/2", regulated at 22 l/min, instant opening and manualclosing.EYEWASH VALVE MOD. 3620 - 3720 Flow 20 l/min at 3 bar, instant opening and manualclosing.
THE UPDATE OF OUR MODELSIS ON THE WEBSITEwww.carlosarboles.com
DIMENSIONS IN MM
SUPPLY G 1/2"DRILL ø 22
350
100
250
190
MOD. 3620
MOD. 3500 DIMENSIONS IN MMDRILL ø 22
190
290
100
SUPPLY G 1/2"
MOD. 3720 DIMENSIONS IN MM
SUPPLY G 1/2"
DRILL ø 22
120
100
250
ø 50
160
18 19
EMER
GEN
CY E
YEW
ASH
ESGENERAL FEATURESMATERIALS Stainless steel flexible tube. Brass fittings.COATING Anti-corrosive polyamide 11 in high-visibility yellow.WATER INLET G 1/2" BSP.WATER INLET PRESSURE Recommended 2 bar. Minimum 1.5 bar.Maximum 8 bar.WATER INLET PRESSURE MOD. 2275 3 bar.
DRENCH HOSE EYEWASH USEManual Eyewashes with 1.5 m long flexible tube, with one ortwo high-flow aerated water spray heads at low pressure.To be used in industry, laboratories, schools, etc.
RECESSED MOUNTING USEIndoor Eyewash recessed in the wall.Eyewash starts operating when you opening stainless steel door.
EYEWASH OPERATION Lever or cabinet handle.EYEWASH HEADS One or two high-flow aerated water spray heads at lowpressure with automatic opening anti-dust cover.EYEWASH VALVE Regulated at 15 l/min (one spay head) or 22 l/min (two sprayheads), instant opening and manual closing.EYEWASH VALVE MOD. 2275 Flow 20 l/min at 3 bar, instant opening andmanual closing.
THE UPDATE OF OUR MODELSIS ON THE WEBSITEwww.carlosarboles.com
DRENCH HOSEEYEWASHESMODELS
WALL EYEWASH WITH SINGLE HEAD
WALL EYEWASH WITH SINGLE HEADAND WALL FEEDING BRACKET
3000
3100
WALL EYEWASH WITH DOUBLE HEADAND WALL FEEDING BRACKET3110
OPTIONAL NON-RETURN VALVE
TABLE EYEWASH WITH SINGLE HEAD3120
TABLE EYEWASH WITH DOUBLE HEAD3130
190030
MOD. 190030
MOD. 3120 MOD. 3130
MOD. 3000 MOD. 2275
DIMENSIONS IN MM
SUPPLY G 1/2"
WASTE G 1" 1/2
358
399
342200
150
383
RECESSED MOUNTINGMODEL
WALL EYEWASH2275
MOD. 3100
DIMENSIONS IN MM
ø 55
180
MA
X. 5
0
FLEXIBLE HOSE1,5 M LENGTH
OPTIONAL:NON-RETURNVALVE
DRILL ø 42
MOD. 1120
DIMENSIONS IN MM
25041
5
605
ø 250
SUPPLYG 1" 1/4
2100
150
SUPPLYG 1" 1/4
ø 228
760
FLOOR MOUNTING
PEDESTAL SHOWERMODELS 1120
SHOWER HEADABS
1120 SS
SHOWER HEADSTAINLESS STEEL
20 21
EMER
GEN
CY S
HO
WER
SGENERAL FEATURESMATERIALS Galvanized steel piping. Brass fittings.COATING Anti-corrosive polyamide 11 in high-visibility yellow.WATER INLET G 1" BSP or G 1" 1/4 BSP.WATER INLET PRESSURE Recommended 2 bar. Minimum 1.5 bar.Maximum 8 bar.
USEIn outdoor and indoor facilities the Emergency Showers areactivated by pulling the lever.
SHOWER OPERATION Pull handle.SHOWER VALVE Full bore 1", regulated at 110 l/min, instant opening and manual closing.INSTALLATION Height assembly see pag. 42.
THE UPDATE OF OUR MODELSIS ON THE WEBSITEwww.carlosarboles.com
MOD. 1100
MOD. 1110
DIMENSIONS IN MM
760
285
ø 250
SUPPLY G 1"
100
WALL MOUNTING
HORIZONTAL SHOWERMODELS 1110 SS
SHOWER HEADSTAINLESS STEEL
1110
SHOWER HEADABS
CEILING MOUNTING
VERTICAL SHOWERMODELS 1100
SHOWER HEADABS
1100 SS
SHOWER HEADSTAINLESS STEEL
DIMENSIONS IN MM
250
165
560
760
ø 250
SUPP
LY G
1"
MOD. 1141
DIMENSIONS IN MM
250
760
650
ø 250
SUPP
LY G
1"780
570
OVER DOOR
EMERGENCY SHOWERRIGHT CONTROL
SHOWERHEAD ABS
SHOWER HEADSTAINLESS STEEL
1141 1141 SS
MOD
ELS
EMERGENCY SHOWERLEFT CONTROL1142 1142 SS
MOD. 1275
DIMENSIONS IN MM
MOD
ELS
SHOWER HEADSTAINLESS STEEL
RECESSED MOUNTINGSHOWER
HEAD ABS
RECESSED SHOWER1275 SS1275
22 23
EMER
GEN
CY S
HO
WER
SSHOWER OPERATION Pull handle or cabinet lever.SHOWER VALVE Full bore 1", regulated at 110 l/min, instant opening and manual closing.INSTALLATION Height assembly see pag. 42.
THE UPDATE OF OUR MODELSIS ON THE WEBSITEwww.carlosarboles.com
GENERAL FEATURESMATERIALS Galvanized steel piping. Brass fittings.COATING Anti-corrosive polyamide 11 in high-visibility yellow.WATER INLET G 1" BSP.WATER INLET PRESSURE Recommended 2 bar. Minimum 1.5 bar.Maximum 8 bar.
OVER DOOR USEIn indoor facilities the Emergency Showers are installed overa door or emergency exit.
RECESSED MOUNTING USEIndoor Shower recessed in the wall.Shower starts operating when you lower the lever.
ø 250
SUPPLYG 1"
ACC
ORD
ING
TO
INST
ALL
ATI
ON
OPTIONALPIPE
212
252
182
70 142
MOD. 4260 TI
MOD. 1110 TI
MOD. 1100 TI DIMENSIONS IN MM
25041
5
550
760
ø 260
SUPP
LY G
1"
MOD. 4220 TI
DIMENSIONS IN MM
25041
5
605
ø 238
SUPP
LY G
1" 1
/4
180
1125
1635
140
WASTEG 1" 1/4
2100
ø 260
ø 260
760
24 25
STA
INLE
SS S
TEEL
SH
OW
ERS
AN
D E
YEW
ASH
ESGENERAL FEATURESMATERIALS Stainless steel piping and fittings.WATER INLET G 1" BSP or G 1" 1/4 BSP.WATER INLET PRESSURE Recommended 2 bar. Minimum 1.5 bar.Maximum 8 bar.SHOWER OPERATION Pull handle.
USESeries of Emergency Showers and Eyewashes completely constructedof stainless steel to be installed in food industries, nuclear energy,etc.The models combine the Shower and Eyewashes between them,minimizing the required space, and using a sole water inlet forboth pieces of equipment.
SHOWER VALVE Full bore 1", regulated at 110 l/min, instantopening and manual closing.EYEWASH OPERATION Push handle or foot treadle.EYEWASH VALVE Full bore 1/2", regulated at 22 l/min, instantopening and manual closing.INSTALLATION Height assembly see pag. 42. THE UPDATE OF OUR MODELS
IS ON THE WEBSITEwww.carlosarboles.com
SHOWERSMODELS
VERTICAL SHOWER, CEILING MOUNTING
HORIZONTAL SHOWER, WALL MOUNTING
1100 TI
1110 TI
PEDESTAL SHOWER, FLOOR MOUNTING1120 TI
SHOWERS AND EYEWASHESMODELS
PULL ROD SHOWER, PUSH HANDLEEYEWASH, FLOOR MOUNTING
PULL ROD SHOWER, PUSH HANDLE ANDFOOT TREADLE EYEWASH, FLOOR MOUNTING
4220 TI
4250 TI
PULL ROD SHOWER, PUSH HANDLEEYEWASH WITHOUT BOWL,WALL MOUNTING
4260 TI
PULL ROD SHOWER, PUSH HANDLEEYEWASH, WALL MOUNTING4285 TI
MOD. 4730 TI
DIMENSIONS IN MM
800
SUPPLYG 1" 1/4 ANDAUTOMATICDRAIN
250
1030
ø 260
850
160
2140
1180
760
410
PLATFORMSMODELS
EMERGENCY SHOWER AND EYEWASHDOUBLE PLATFORM SEPARATE OPERATION
SHOWER PLATFORM, SHOWER HEAD ABS
4700 TI
4710 TI
EMERGENCY SHOWER AND EYEWASHPLATFORM SIMULTANEOUS OPERATION4720 TI
EMERGENCY SHOWER AND EYEWASHPLATFORM INDEPENDENT OPERATION4730 TI
EYEWASH PLATFORM4750 TI
26 27
STA
INLE
SS S
TEEL
SH
OW
ERS
AN
D E
YEW
ASH
ESGENERAL FEATURESMATERIALS Stainless steel piping and fittings.WATER INLET G 1/2" BSP (Eyewash) or G 1" 1/4 BSP (Cabin).WATER INLET PRESSURE Recommended 2 bar. Minimum 1.5 bar.Maximum 8 bar (Eyewash) or 4 bar (Cabin).SHOWER OPERATION Pull handle or platform.
USESeries of Emergency Eyewashes and Booth Stations completelyconstructed of stainless steel to be installed in food industries,nuclear energy, etc.
PLATFORM VALVE 1" 1/4, automatic opening and closing, automatic drain.SHOWER OPERATION Platform or pull handle.SHOWER VALVE Full bore 1", regulated at 110 l/min, instant opening and manual closing.EYEWASH OPERATION Push handle, foot treadle or platform.EYEWASH VALVE Full bore 1/2", regulated at 22 l/min, instant opening and manual closing.INSTALLATION Height assembly see pag. 42.
THE UPDATE OF OUR MODELSIS ON THE WEBSITEwww.carlosarboles.com
DIMENSIONS IN MM
SUPPLYG 1/2"
WASTEG 1" 1/4
250
ø 260
190
230
MOD. 2210 TI MOD. 2220 TI
MOD. 3510 TI
EYEWASHESMODELS
WALL EYEWASH WITH BOWL
PEDESTAL EYEWASHWITH BOWL
2210 TI
2220 TI
EYEWASH WITHOUT BOWL3510 TI
PEDESTAL EYEWASH WITHBOWL AND FOOT TREADLE2710 TI
28 29
SELF
-DRA
ININ
G S
HO
WER
S A
ND
EYE
WA
SHES
MOD. 4700
MOD. 4750
GENERAL FEATURESMATERIALS Galvanized steel piping. Brass fittings.COATING Anti-corrosive polyamide 11 in high-visibility yellow.WATER INLET G 1/2" BSP or G 1" 1/4 BSP.WATER INLET PRESSURE Recommended 2 bar. Minimum 1.5 bar.Maximum 4 bar.
USEThe Self-draining Showers platforms in external facilities is completelyautomatic when a person enters the platform. Automatic drain valvefor residual water.When standing on the platform the water enters the supply pipe tothe Shower or Eyewash. When exiting after use, the residual waterdrains via the automatic drain valve thus preventing the systemfrom freezing.
PLATFORM VALVE 1" 1/4, automatic opening and closing, automatic drain.SHOWER OPERATION Platform or pull handle.SHOWER VALVE Full bore 1", regulated at 110 l/min, instant opening and manual closing.EYEWASH OPERATION Platform.EYEWASH VALVE Full bore 1/2", regulated at 22 l/min, instant opening and manualclosing.EYEWASH HEADS Two high-flow aerated water spray heads at low pressure withautomatic opening anti-dust cover.
THE UPDATE OF OUR MODELSIS ON THE WEBSITEwww.carlosarboles.com
MOD. 4720
MOD. 4730 DIMENSIONS IN MM
800
SUPPLYG 1" 1/4 ANDAUTOMATICDRAIN
250
415
1030
ø 250
850
165
2100
1170
760
410
MODELS EYEWASH PLATFORM
BOWLSTAINLESS STEEL
4750 SS
BOWLABS
4750
PLATFORMS SHOWERS ANDEYEWASHES
MODELS
SHOWERHEAD ABS
SHOWER HEADSTAINLESS STEEL
4720 4720 SSEMERGENCY SHOWER ANDEYEWASH PLATFORMSIMULTANEOUS OPERATION
EMERGENCY SHOWER ANDEYEWASH PLATFORMINDEPENDENT OPERATION
4730 4730 SS
MODELS
EMERGENCY SHOWERAND EYEWASHDOUBLE PLATFORMSEPARATE OPERATION
SHOWERHEAD ABS
4700
SHOWER HEADSTAINLESS STEEL
4700 SS
PLATFORMS SHOWERS ANDEYEWASHES
DIMENSIONS IN MM
SUPP
LY G
1/2
" AN
DA
UTO
MAT
IC D
RAIN
800
1030
WASTEG 1" 1/4
1160
100
980
230
ø 250
850
SUPPLYG 1" 1/4ANDAUTOMATICDRAIN
1030
100
2170
850
630730
14 NOZZLES
DIMENSIONS IN MM
MOD.4252 SS
MOD. 4253
FLOOR MOUNTINGSHOWER
HEAD/BOWLABS
SHOWERHEAD/BOWL
STAINLESS STEEL
MOD
ELS
SIMULTANEOUS OPERATIONFOOT TREADLE OPERATION4252 4252 SS
INDEPENDENT OPERATION, PUSHHANDLE FOR SHOWER, HANDLE ORFOOT TREADLE FOR EYEWASH
4253 4253 SS
DIMENSIONS IN MMMOD. 4810
MODEL 4710SHOWER PLATFORM, SHOWER HEAD ABS
MODEL 4710 SSSHOWER PLATFORM, SHOWER HEAD STAINLESS STEEL
PLATFORM SHOWERS
MODEL 4810PLATFORM WITH 14 SPRAYS
DECONTAMINATION BOOTH
MOD. 4710
30 31
SELF
-DRA
ININ
G S
HO
WER
S A
ND
EYE
WA
SHES
THE UPDATE OF OUR MODELSIS ON THE WEBSITEwww.carlosarboles.com
PLATFORM VALVE 1" 1/4, automatic opening and closing, automatic drain.SHOWER OPERATION Push handle, foot treadle or platform.SHOWER VALVE Full bore 1", regulated at 110 l/min, instant opening and manual closing.EYEWASH OPERATION Push handle or foot treadle.EYEWASH VALVE Full bore 1/2", regulated at 22 l/min, instant opening and manual closing.EYEWASH HEADS Two high-flow aerated water spray heads at low pressure with automatic openinganti-dust cover.
USEThe Self-draining Showers platforms in external facilities iscompletely automatic when a person enters the platform.Automatic drain valve for residual water.The Self-draining Showers floor mounting are provided with drainvalves which are activated after pushing the handle.
GENERAL FEATURESMATERIALS Galvanized steel piping. Brass fittings.COATING Anti-corrosive polyamide 11 in high-visibility yellow.WATER INLET G 1" 1/4 BSP.WATER INLET PRESSURE Recommended 2 bar. Minimum 1.5 bar.Maximum 8 bar. (4 bar for platforms).
250
510
ø 250
2100
1130 10
10
150
WASTEG 1" 1/4
ø 250
EYEWASHAUTOMATICDRAIN
SUPPLYG 1" 1/4
SHOWERAUTOMATICDRAIN
32 33
SELF
-DRA
ININ
G S
HO
WER
S A
ND
EYE
WA
SHES
MOD. 1120 FP MOD. 2220 FP DIMENSIONS IN MM
UNDERGROUND FLOOR MOUNTING
TEMPERATURE SHOWER PROTECTION1120 FP 1120 FP/SSMODELS
TEMPERATURE EYEWASH PROTECTION2220 FP
SHOWER HEADABS
SHOWER HEADSTAINLESS STEEL
MOD. 2210 FP
MOD. 1110 FP DIMENSIONS IN MM
SUPPLYG 1"
250
860
750
ø 250
DIMENSIONS IN MM
260
ø 250
SUPPLYG 1/2"
WASTEG 1" 1/4
415
AUTOMATICDRAIN
345
190
INTERIOR WALL MOUNTING
TEMPERATURE EYEWASHPROTECTION2210 FP 2210 FP/SSMODELS
MODELS TEMPERATURE SHOWERPROTECTION1110 FP 1110 FP/SS
SHOWER HEADABS
SHOWER HEADSTAINLESS STEEL
BOWLABS
BOWLSTAINLESS STEEL
GENERAL FEATURESMATERIALS Galvanized steel piping. Brass fittings.COATING Anti-corrosive polyamide 11 in high-visibility yellow.WATER INLET G 1/2" BSP, G 1" BSP or G 1" 1/4 BSP.WATER INLET PRESSURE Recommended 2 bar. Minimum 1.5 bar.Maximum 8 bar.
USEIn outdoor facilities with extreme low or high temperatures. The floorequipment uses underground valves with automatic drains. The wallequipment is supplied inside the building. When the operating lever ispushed, the water enters the supply pipe to the Shower or Eyewash,when closing the valve after use the residual water drains via theautomatic drain valve thus preventing the system from freezing.
SHOWER/EYEWASH OPERATION Pull lever handle/Push handle.SHOWER VALVE Full bore 1" or 1" 1/4, regulated at 110 l/min, instant openingand manual closing, automatic drain.EYEWASH HEADS Two high-flow aerated water spray heads at low pressurewith automatic opening anti-dust cover.EYEWASH VALVE Full bore 1/2", regulated at 22 l/min, instant opening andmanual closing, automatic drain.INSTALLATION Height assembly see pag. 42.
THE UPDATE OF OUR MODELSIS ON THE WEBSITEwww.carlosarboles.com
SUPPLYG 1" 1/4 ANDAUTOMATIC
DRAIN
FLOORLINE
FROSTLINE
520
ø 250
2100
255
1000
780
150
190
150
FLOORLINE
745
FROSTLINE10
0010
25
SUPPLYG 1/2" AND
AUTOMATICDRAIN
MOD. 4223 FP DIMENSIONS IN MM
MOD.4222 FP
MODEL 4222 FPTEMPERATURE PROTECTIONSHOWER/EYEWASH BOWL ABS,SIMULTANEOUS OPERATION
MODEL 4222 FP/SSTEMPERATURE PROTECTIONSHOWER/EYEWASH STAINLESS STEEL,SIMULTANEOUS OPERATION
MODEL 4223 FPTEMPERATURE PROTECTIONSHOWER/EYEWASH BOWL ABS,INDEPENDENT OPERATION
MODEL 4223 FP/SSTEMPERATURE PROTECTIONSHOWER/EYEWASHSTAINLESS STEEL, INDEPENDENTOPERATION
UNDERGROUNDFLOOR MOUNTING
250
1080
515
2100
SUPPLY G 1" 1/4 ANDAUTOMATIC DRAIN
SUPPLY G 1/2" ANDAUTOMATIC DRAIN
FROST LINE
ø 250
760
ø 250
1000
775
1000
FROST LINE
MOD. 4710 FP
DIMENSIONS IN MM
34 35
SELF
-DRA
ININ
G S
HO
WER
S A
ND
EYE
WA
SHES
THE UPDATE OF OUR MODELSIS ON THE WEBSITEwww.carlosarboles.com
USEIn outdoor facilities with extreme low or high temperatures. The operationof Decontamination Booths is completed when a person enters theplatform. The equipment uses underground valves with automaticdrains. When standing on the platform the water enters the supplypipe to the Shower or Eyewash. When exiting after use, the residualwater drains via the automatic drain valve thus preventing thesystem from freezing.
GENERAL FEATURESMATERIALS Galvanized steel piping. Brass fittings.COATING Anti-corrosive polyamide 11 in high-visibility yellow.WATER INLET G 1/2" BSP or G 1" 1/4 BSP.WATER INLET PRESSURE Recommended 2 bar. Minimum 1.5 bar.Maximum 8 bar.
PLATFORM VALVE 1" 1/4, automatic opening and closing, automatic drain.SHOWER/EYEWASH OPERATION Pull lever handle, push handle or platform.SHOWER VALVE Full bore 1" or 1" 1/4, regulated at 110 l/min, instant opening and manual closing, automatic drain.EYEWASH HEADS Two high-flow aerated water spray heads at low pressure with automatic opening anti-dust cover.EYEWASH VALVE Full bore 1/2", regulated at 22 l/min, instant opening and manual closing, automatic drainINSTALLATION Height assembly see pag. 42.
UNDERGROUNDPLATFORM
MOD
ELS
EMERGENCY SHOWERAND EYEWASHPLATFORMSIMULTANEOUSOPERATION
SHOWER PLATFORM
SHOWERHEAD ABS
4710 FP
4720 FP
SHOWER HEADSTAINLESS STEEL
4710 FP/SS
4720 FP/SS
EMERGENCY SHOWERAND EYEWASHPLATFORMINDEPENDENTOPERATION
4730 FP 4730 FP/SS
EYEWASH PLATFORMWITHOUT BOWL
4750 FP
PLATFORM WITH14 SPRAYS4810 FP
SUPPLY G 1" 1/4
ø 250
2145
250
1000
FROST LINE
1030
FLOOR LINE
460
800
AUTOMATICDRAIN
850
DIMENSIONS IN MM
MOD. 4720 TS/FP
2400
2150
ø 1260
FLOOR LINE
FROST LINE
850
2600
MODELS
SHOWER PLATFORM WITH UNDERGROUND TANK
SHOWER/EYEWASH PLATFORM WITHUNDERGROUND TANK, SIMULTANEOUS OPERATION
4710 TS/FP
4720 TS/FP
4730 TS/FP SHOWER/EYEWASH PLATFORM WITHUNDERGROUND TANK, INDEPENDENT OPERATION
UNDERGROUND TANK
36 37
TAN
K SH
OW
ERS
GENERAL FEATURES OVERHEAD TANKMATERIALS Tank, structure & piping in stainless steel.TANK CAPACITY 1500 L.WATER FILLING G 1” BSP.OVERFLOW INTEGRATEDSHOWER OPERATION Pull handle.EYEWASH OPERATION Push handle.
USEOverhead Tank Showers are designed for remote location withinadequate water supply providing necessary water by gravity upto 15 min. according to standard.In addition for extreme temperatures environment(hot/freeze conditions) are designed Underground Tank Showers.After use, pipes remain empty preventing the system from heat andfreezing. Therefore, expensive chiller and heating systems are notrequired.
THE UPDATE OF OUR MODELSIS ON THE WEBSITEwww.carlosarboles.com
GENERAL FEATURES UNDERGROUND TANKMATERIALS Tank in polyethylene, shower platform in galvanized steel piping withanti-corrosive polyamide 11 coating. Brass fittings.TANK CAPACITY 2000 L.ADJUSTABLE DOME SHAFTWATER FILLING Large oval lid, safe to walk on.ELECTRICAL Submersible pump 230V 1.5Kw. Control box 230V /24V with platform limit switch.
MOD. 4820 TI/TS DIMENSIONS IN MM
MODELS
EMERGENCY SHOWER ANDEYEWASH WITH OVERHEAD TANK
EMERGENCY SHOWER WITHOVERHEAD TANK
4820 TI/TS
4830 TI/TS
OVERHEAD TANK
3666
G 1"
11201120
OPTIONSMODEL 196001INLET FLOAT VALVE FOR AUTOMATIC TANK FILLING
MODEL 196002VISUAL SIDE INDICATOR OF TANK LEVEL
MODEL 196003ELECTRIC HEATER WITH ADJUSTABLE THERMOSTATFOR COLD WEATHER (T<15º C)
MODEL 196004THERMAL INSULATION FOR HOT (T>37º C) OR COLD(T<15º C) WEATHER
MODEL 196005EYEWASH ACTIVATION SWITCH TO SEND SIGNAL TOCONTROL ROOM
MODEL 196006SHOWER ACTIVATION SWITCH TO SEND SIGNAL TOCONTROL ROOM
MODEL 195112ANTI SCALD VALVE
MODEL 195110FREEZE PROOF VALVE
38 39
ACC
ESSO
RIES
THE UPDATE OF OUR MODELSIS ON THE WEBSITEwww.carlosarboles.com
TEMPERED WATERIn order to avoid thermal shock it is possibleto include a thermostatic mixer in theShower and Eyewash, specificallydesigned for Emergency Equipmentthat supply tempered water.Standards recommendstemperatures between15º C - 37º C.The valve mixes cold and hotwater inlets to deliver tepidwater at the desired temperature.On failure of hot water supply,internal cold water by-passdelivers cold water supply.On failure of cold water supply,hot water is shut down to prevent anydamage on the user.
MODEL 195020THERMOSTATIC SAFETY VALVE 150
SPECIFICATIONSMODEL 195120• Adjustable temperature knob regulator,
from 20 to 43º C.• Maximum hot water supply temperature:
100º C.For optimum performance, 50-70º C.Maximum cold water temperature 23º Cfor optimum performance, 5-10º C.
• Minimum hot and cold water supply pressure:2 bar. Recommended 3 bar.Maximum supply pressure is 8 bar.
• G 1" male connections with check valves.• Cold water by-pass flow rate 105 lpm at 2 bar.• Tempered water flow rate 122 l/min at 2 bar.
MODEL 195120THERMOSTATIC SAFETYVALVE 100
MODEL 195112• Scald protection valve• Nominal pressure 2 bar.• Maximum working pressure 8 bar.• Temperature of maximum openinng
37º C.• Full close temperature 29º C.
SPECIFICATIONSMODEL 195020• Adjustable temperature regulator set for 29º C, high temperature limit
stop set for 32º C.• Termomether display.• Recommended hot inlet temperature, 60º C.
• Minimum hot and cold water supply pressure: 2 bar.Maximum supply pressure is 8 bar.
• G 1" 1/4 male connections with check valves.• Cold water by-pass flow rate 105 lpm at 2 bar.• Tempered water flow rate 350 l/min at 2 bar for multiple
Showers/Eyewash.
DIMENSIONS IN MM
G 1" 1/4 G 1" 1/4
STOPSCREW
G 1" 1/2
305 mm
LIMIT TEMPERATUREADJUSTABLE SCREW
DIMENSIONS IN MM
56
134
112
60
G 1"
G 1"
G 1"
1/4
MODEL 973010CONNECTOR 1/2"
FOR 1 VALVE
PRESSURE PROTECTIONFor optimum usage of the Emergency Equipment it is advisedto maintain water pressure under recommended values toavoid premature wear of components, unnecessary strain forusers and damage to the installation.For pressures above 4 bar or 8 bar depending onequipment it is recommended the use of a pressurereduction valve.
MODEL 190700TE 1" 1/4 FOR 1 VALVE
MODEL 973985TE 1/2" FOR 2 VALVES
MODEL 191043TE 1/2" FOR 1 VALVE
TEMPERATURE PROTECTIONThermal actuated valves continually sense the water and the ambienttemperature and automatically bleed the Shower/Eyewash systems to establishflow until the over temperature water is eliminated.Operation: When the temperature exceeds safe limits, the thermal actuatormodulates the valve open. A small quantity of water from the pipe systemflows through the valve until the makeup water temperature returns to thesafe range.
SPECIFICATIONSBody and valves in stainless steel and actuator in brass.Supply and waste 1/2".MODEL 195110• Freeze protection valve• Nominal pressure 2 bar.• Maximum working pressure 8 bar.• Temperature of maximum openinng
2º C.• Full close temperature 7º C.
MODEL 950250PRESSURE REDUCTION VALVE FOR MAX.INLET PRESSURE 25 BAR AND WITH OUTLETADJUSTED PRESSURE 3 BAR
40 41
ACC
ESSO
RIES
MODEL 190121WALL SUPPORT MODEL 1110
MODEL 195003TEST FOR SHOWER
SHOWER PLATFORMAccessory to activate all to the platform Showers,models 1120 - 4220 - 4230 - 4250 - 4260, and close the Showerby a lever.
BOOTH STRUCTUREMade from coated steel to be fastened on the floor.The three sides are closed by PMMA panels in high-visibility yellow.The structure reduces the thermal shock, and protects from the wind and cold.
SHOWER TESTEssential for flow control of the EmergencyShower Stations.Made of plastified PVC.
ALARMVisual and audible alarm is activated when the water flows through thepiping while the Emergency Equipment is in use.Optionally, it send an operation signal to the control or emergency roomof the facility.Installation must be carried out by qualified personnel.WATER SUPPLY PRESSURE Optimum 2 bar. Minimum 1,5 bar.Maximum 8 bar.
THE UPDATE OF OUR MODELSIS ON THE WEBSITEwww.carlosarboles.com
ALARM KIT FOR NON EXPLOSIVES ATMOSPHERES220-240 VAC 50/60 Hz (Schuko connection).IP43 Protection.
FLOWSWITCH• Max swichting voltage 230 VAC, 48 VDC.• Max swichting current 1 A.• Connecting cable lenht 1.5 m, 2 x 1 mm 2.
VISUAL AND AUDIBLE ALARM• Orange flashing light 110 flash/min.• Continous sound 92 db.
ALARM KIT FOR EXPLOSIVES ATMOSPHERES220-240 VAC 50/60 Hz.Group II, Zone 1, Category 2G.Other classifications available upon request.
FLOWSWITCH• Max swichting voltage 250 VAC/VDC.• Max swichting current 5 A AC/1 A DC.
VISUAL ALARM• Orange flashing light up to configurable 120 flash/min.
AUDIBLE ALARM• Continous sound, regulable 90-110 db.
MODEL 194740STRUCTURE FOR DECONTAMINATION BOOTH AND PLATFORM SHOWERS
MODEL 194900SHOWER PLATFORMFOR MODELS 1120 - 4220 - 4230 - 4250 - 4260
KIT ALARMA
MODEL 195030ALARM KIT FOR SAFE AREAS
MODEL 190614FLOWSWITCH FOR SAFE AREAS
MODEL 195040ALARM KIT FOR EXPLOSIVE ATMOSPHERES
MODEL 950634FLOWSWITCH FOR EXPLOSIVE ATMOSPHERES
INSTALLATION
EMERGENCY EQUIPMENT LOCATIONThe location of Emergency Equipment should complywith the following conditions:• It should be installed in places that are highly-visible
and easily accessed from at least in three directions.• It should be installed in those areas where there is
danger, and should not be more than 10 seconds awayfrom the area where accidents can occur. Where thereis an immidiate risk from concentrated chemicals, equipment should be adjacent to the risk.
• It should be placed at the same level as the source of danger, without any obstruction in the path to the Emergency Equipment, such as doors, trip hazards, steps or matting, etc..
ASSEMBLYIt is recommended to assemble the EmergencyEquipment as indicated by the assembly drawing.The necessary means are as follows:• Pipe sealings.• Tools to fasten the equipment to the surface.It is recommended to install the Emergency Showersthat are not fastened to the ground at a height wherethe spray head is between 210 and 230 cm above thelevel where the user will stand.It is recommended to install the Emergency Eyewashesthat are not fastened to the ground at a height wherethe output nozzles of the Eyewashes are between 90 and110 cm above the level where the user will stand.
WATER SUPPLYThe water supply to the Emergency Equipment shouldcomply with the following conditions:• It should be supplied from the main or the emergency
piping. The diameter of the supply tube should be atleast G 1" BSP.
• An inlet pressure of 2 bar is recommended for the Emergency Equipment.For correct operation, the minimum pressure is1.5 bar, and the maximum pressure is 4 bar or 8 bardepending on equipment.
• A water temperature between 15º C and 37º C is recommended.
• It is recommended to install a filter, as well as todrain the piping before installing the EmergencyEquipment.
• Potable water, or of similar quality is required.• Drainage system are recommend for Eyewash and
floordrains for Showers in order to avoid hazard or slippery surfaces. After use waste water may be connected waste disposal system or neutralization tank.
42 43
INST
ALL
ATIO
N A
ND
MA
INTE
NA
NCE
INST
RUCT
ION
SEMERGENCY SHOWER AND EYEWASHThe following are the basic installation standards forEmergency Equipment.
MODEL 191004 MODEL 191005
MODEL 191006
MODEL190190
OPERATION
ACTIVATIONIn case of accident, the injured person should shower orwash his/her eyes IMMEDIATELY for a minimum of15 minutes.The Emergency Equipment is quicklyactivated as follows:• The Emergency Eyewashes
pushing the paddle backwards orby stepping on the foot pedal.
• The Emergency Showers by pullingthe triangular lever.
• The manual equipment by pushingthe lever.
Suitable medical assistance shouldbe sent IMMEDIATELY.
MAINTENANCE
MAINTENANCE AND TRAININGThe operation of the Emergency Showers and Eyewashesshould be verified at least ONCE a week in order to guaranteethe water supply and to prevent theproliferation of microbes.Fill out the maintenance table supplied(Model 190190) or a similar one.Personnel should be trained asfollows:• The location and signaling of
the Emergency Equipment.• The operation of the Emergency Showers and Eyewashes.• The manner of notifying the
healthcare personnel.• Maintenance to be performed
on the Emergency Equipmentas described above.
SIGNS
PLATESEach piece of equipment that wemanufacture is provided with a plate orsign to signal the unit (except in thetable assembly models).The plates are photoluminescent, witha green background, and white text.Dimensions: 210 x 297 mm
MODEL 190400SHOWER FP MODELS VALVEG 1" 1/4 BSP WITH DRAINMODEL 190401EYEWASH FP MODELS VALVEG 1/2" BSP WITH DRAIN
MODEL 190108SHOWER VALVE G 1" BSPMODEL 192108SHOWER VALVE G 1" BSPWITH DRAIN
MODEL 191150STAINLESS STEEL BOWL
MODEL 190150ABS HIGH VISIBILITYYELLOW BOWL
MODEL 192148DOUBLE EMERGENCYEYEWASH
MODEL 190160WALL BRACKET WITH WATERINLET
MODEL 190105PULL ROD
MODEL 190106SHOWER HANDLE
MODEL 190131COMPLETE FOOT CONTROLASSEMBLY
MODEL 190123EYEWASH HEAD COVER
MODEL 190135EYEWASH HEAD
MODEL 191136EYEWASH HEAD ASSEMBLYIN STAINLESS STEEL
MODEL 190136EYEWASH HEAD ASSEMBLYIN ABSMODEL 193136EYEWASH HEAD ASSEMBLYIN BRASS
MODEL 190146PUSH HANDLE PLASTICMODEL 193146PUSH HANDLE ALUMINIUM
1,5 M FLEXIBLE STAINLESSSTEEL HOSEMODEL 190149FOR SINGLE EYEWASHMODEL 190151FOR DOUBLE EYEWASH
MODEL 190145EYEWASH VALVE G 1/2" BSPMODEL 192145EYEWASH VALVE G 1/2" BSPWITH DRAIN
44
SPA
RE P
ART
SWe have a wide range of spare parts for all the Emergency Showerand Eyewashes models.
ASK ABOUT AVAILABILITY OF OTHER SPARE PARTS
THE UPDATE OF OUR MODELSIS ON THE WEBSITEwww.carlosarboles.com
MODEL 190100SHOWER HEAD ABS HIGHVISIBILITY YELLOW G 1"MODEL 190112SHOWER HEAD ABS HIGHVISIBILITY YELLOW G 1" 1/2
MODEL 192100SHOWER HEAD STAINLESSSTEEL G 1"MODEL 192112SHOWER HEAD STAINLESSSTEEL G 1" 1/2
MODEL 190402PLATFORM VALVE WITHDRAIN G 1" 1/4 BSP
MODEL 190109WALL BRACKET
MODEL 190148EMERGENCY EYEWASH
MODEL 190125EYEWASH BRACKET
DIR
ECTO
RY CODE PAGE CODE PAGECODE PAGE
11001100 SS1100 TI
11101110 FP
1110 FP/SS1110 SS1110 TI
11201120 FP
1120 FP/SS1120 SS1120 TI
11411141 SS
11421142 SS
12751275 SS
22102210 FP
2210 FP/SS2210 SS2210 TI
22122212 SS2215 SS
22202220 FP2220 SS2220 TI
22302230 SS
22402240 SS
22752710
2710 SS2710 TI
3000310031103120313035003510
3510 TI36203720
192100192108192112192145192148193136193146194740194900195003195020195030195040195110195112195120196001196002196003196004196005196006950250950634973010973985
21212521333321252032322025222222222323143333142616161615321526141415151915152618181818181614261616
29273729343429372728342827313436361844444444444441444444444444444444444444434444444139434343394444
4444444444444440404138414139393836363636363639413939
4720 SS4720 TI
4720 TS/FP4730
4730 FP4730 FP/SS
4730 SS4730 TS/FP
4730 TI4750
4750 FP4750 SS4750 TI
48104810 FP
4820 TI/TS4830 TI/TS
190030190100190105190106190108190109190112190121190123190125190131190135190136190145190146190148190149190150190151190160190190190400190401190402190614190700191004191005191006191043191136191150
CODE PAGE
38204220
4220 SS4220 TI
42214221 SS4222 FP
4222 FP/SS4223 FP
4223 FP/SS4225
4225 SS4230
4230 SS4250
4250 SS4250 TI
42524252 SS
42534253 SS
42554255 SS
42604260 SS4260 TI
42754275 SS
42804280 SS
42854285 SS4285 TI
42904290 SS
42954295 SS
47004700 SS4700 TI
47104710 FP
4710 FP/SS4710 SS4710 TI
4710 TS/FP4720
4720 FP4720 FP/SS
1488
241111353535351111
8899
2430303030
99
1010241313121212122412121212282827313434312737293434
www.carlosarboles.com
CGE.UK.2018
HEAD OFFICECompositor Narvaez, 1O P. I. CAN JARDIO8191 RUBI (Barcelona) SPAINTelephone +34 935 860 780Fax +34 936 973 [email protected]
LABORATORY TAPS AND SAFETY SHOWERS - EYEWASHES
Unit 56, Evans Business Centre,Manchester Road, Bolton, BL3 2NZTel. 0044(0)1204 388814Fax 0044(0)1204 [email protected]
LABORATORY TAPS AND SAFETY SHOWERS - EYEWASHES
© c
opyr
ight
201
8 CA
RLO
S A
RBO
LES
S.A
DISTRIBUTOR: Finland
info@labralvi.�+358 400 164 594