emco entrance mat systems - Matting AB · PDF filePrice list 2014 emco entrance mat systems...

Price list 2014

emco entrance mat systems

Designing clean entrances

17 22

2025

9,5527 5

22 27

1710 202530

527 (29)

15,5

(5 5 5)

22 27

1710 202530

6527 (29) 5

15,5

22 27

1710

20 15,52530

527 (29)

17 22

2025

9,5527 5

22 27

1710 202530

527 (29)

15,5

emcoentrance matting – DIPLOMAT

Type M-Height F-Height Frame-type € / m2 1)

517 RB 17 mm 20 mm 500/20 A, S 511,-

522 RB 22 mm 25 mm 500/25 A, B, S 539,-

emcoDIPLOMAT entrance matting with coarse fibre ribbed inlays and brush strips (RB)

22 27

1710 202530

6527 (29) (5 5 5)5

15,5


510 RK 10 mm 15,5 mm 500/13 A 407,-

517 RK 17 mm 20 mm 500/20 A, S 429,-

522 RK 22 mm 25 mm 500/25 A, B, S 458,-

527 RK 27 mm 30 mm 500/30 A, B, S 487,-

emcoDIPLOMAT entrance matting with coarse fibre ribbed inlays and scraper bar (RK)


510 G 10 mm 15,5 mm 500/13 A 420,-

517 G 17 mm 20 mm 500/20 A, S 444,-

522 G 22 mm 25 mm 500/25 A, B, S 473,-

527 G 27 mm 30 mm 500/30 A, B, S 503,-

emcoDIPLOMATentrance matting with rubber inlays (G)


510 GK 10 mm 15,5 mm 500/13 A 480,-

517 GK 17 mm 20 mm 500/20 A, S 502,-

522 GK 22 mm 25 mm 500/25 A, B, S 530,-

527 GK 27 mm 30 mm 500/30 A, B, S 562,-

emcoDIPLOMAT entrance matting with rubber inlays and scraper bar (GK)

emcoDIPLOMAT entrance matting with coarse fibre ribbed inlays (R) Type M-Height F-Height Frame-type € / m2 1)

510 R 10 mm 15,5 mm 500/13 A 350,-

517 R 17 mm 20 mm 500/20 A, S 372,-

522 R 22 mm 25 mm 500/25 A, B, S 399,-

527 R 27 mm 30 mm 500/30 A, B, S 430,-

Frame-type: A = Aluminium, B = Brass, S = Stainless steel (V2A) 1) Price without frame 2) Actual mat height with CB inlays: + 1 to 2 mm, Values shown in red: emco DIPLOMAT 510


517 GB 17 mm 20 mm 500/20 A, S 585,-

522 GB 22 mm 25 mm 500/25 A, B, S 614,-

emcoDIPLOMATentrance matting with rubber inlays and brush strips (GB)

Rib colours see page 8



Type M-Height 2) F-Height Frame-type € / m2 1)

510 CB 10 mm 15,5 mm 500/13 A 533,-

517 CB 17 mm 20 mm 500/20 A, S 555,-

522 CB 22 mm 25 mm 500/25 A, B, S 585,-

527 CB 27 mm 30 mm 500/30 A, B, S 614,-

emcoDIPLOMAT entrance matting with cassette brushes (CB)

22 27

1710 202530

527 (29)

15,5

Typ M-Höhe 2) R-Höhe Rahmen-Typ €/m2 1)

510 RG 10 mm 15,5 mm 500/13 A 389,-

517 RG 17 mm 20 mm 500/20 A, S 412,-

522 RG 22 mm 25 mm 500/25 A, M, S 439,-

527 RG 27 mm 30 mm 500/30 A, M, S 470,-

emco Eingangsmatten DIPLOMAT mit Ripseinlage und Gummieinlage (RG)

22 27

1710 202530

527 (29)

15,5


510 RG 10 mm 15,5 mm 500/13 A 389,-

517 RG 17 mm 20 mm 500/20 A, S 412,-

522 RG 22 mm 25 mm 500/25 A, M, S 439,-

527 RG 27 mm 30 mm 500/30 A, M, S 470,-

emcoDIPLOMAT entrance matting with coarse fibre ribbed and rubber inlay (RG)


GreyBlackCassette brush colours:

2Right reserved to make technical changes: 01.01.2014

22 27

1710 202530

527 (29)

15,5

22 27

17 2010

15,525

527 (29)

30

22 27

1710 202530

527 (29)

15,5

22 27

1710

6527 (29) (5 5 5)5

202530

15,5

22 252717 20

527

30

2217

27

202530

527

17 22

2025

9,5527 5

emcoentrance matting – DIPLOMAT

emcoDIPLOMAT entrance matting with coarse fibre ribbed inlays and cassette brushes (RCB) Type M-Height 2) F-Height Frame-type € / m2 1)

510 RCB 10 mm 15,5 mm 500/13 A 444,-

517 RCB 17 mm 20 mm 500/20 A, S 466,-

522 RCB 22 mm 25 mm 500/25 A, B, S 496,-

527 RCB 27 mm 30 mm 500/30 525,-

emcoDIPLOMAT entrance matting with textile brush inlay (TB)

GreyAnthraciteTextile brush colours:


510 TB 10 mm 15,5 mm 500/13 A 420,-

517 TB 17 mm 20 mm 500/20 A, S 444,-

522 TB 22 mm 25 mm 500/25 A, B, S 473,-

527 TB 27 mm 30 mm 500/30 A, B, S 503,-

emcoDIPLOMAT entrance matting with rubber inlay and cassette brushes (GCB) Type M-Height 2) F-Height Frame-type € / m2 1)

510 GCB 10 mm 15,5 mm 500/13 A 478,-

517 GCB 17 mm 20 mm 500/20 A, S 499,-

522 GCB 22 mm 25 mm 500/25 A, B, S 530,-

527 GCB 27 mm 30 mm 500/30 A, B, S 559,-

GreyBlackCassette brush colours:


517 TB/B 17 mm 20 mm 500/20 A, S 585,-

522 TB/B 22 mm 25 mm 500/25 A, B, S 614,-

emcoDIPLOMAT entrance matting with textile brush inlay and brush strips (TB/B)



510 TB/K 10 mm 15,5 mm 500/13 A 480,-

517 TB/K 17 mm 20 mm 500/20 A, S 502,-

522 TB/K 22 mm 25 mm 500/25 A, B, S 530,-

527 TB/K 27 mm 30 mm 500/30 A, B, S 562,-

emcoDIPLOMAT entrance matting with textile brush inlay and scraper bar (TB/K)


emcoDIPLOMAT entrance matting with MAXIMUS inlay Type M-Height 2) F-Height Frame-type € / m2 1)

517 M 17 mm 20 mm 500/20 A, S 455,-

522 M 22 mm 25 mm 500/25 A, B, S 482,-

527 M 27 mm 30 mm 500/30 A, B, S 513,-

in 12 standard colours (standard designs)

Frame-type: A = Aluminium, B = Brass, S = Stainless steel (V2A) 1) Price without frame 2) Actual mat height with CB inlays: + 1 to 2 mm, Values shown in red: emco DIPLOMAT 510


517 CBI 17 mm 20 mm 500/20 A, S 699,-

522 CBI 22 mm 25 mm 500/25 A, M, S 735,-

527 CBI 27 mm 30 mm 500/30 A, M, S 765,-

emcoDIPLOMAT entrance matting with cassette brushes INITIAL (CBI)

AnthraciteBlackCassette brush colours:

3 Right reserved to make technical changes: 01.01.2014

30 (29) 5

2217 2025

30 (29) 5

2217 2025

30 (29) 5

2217 2025

30 (29) 5

2217 2025

30(29) 5

2217 2025

30 (29) 5

2217 2025

30 (29) 5

2217 2025

22

29

GreyCassette brush colours: Black

emcoentrance matting – MARSCHALL, RADIAL

Frame-type: A = Aluminium, B = Brass, S = Stainless steel (V2A) 1) Price without frame 2) Actual mat height with CB inlays: + 1 to 2 mm, Values shown in red: emco MARSCHALL 522


517 S/R 17 mm 20 mm 500/20 A, S 511,-

522 S/R 22 mm 25 mm 500/25 A, B, S 539,-

emcoMARSCHALL entrance matting with coarse fibre ribbed inlays (R)



517 S/RG 17 mm 20 mm 500/20 A, S 549,-

522 S/RG 22 mm 25 mm 500/25 A, B, S 579,-


517 S/RCB 17 mm 20 mm 500/20 A, S 605,-

522 S/RCB 22 mm 25 mm 500/25 A, B, S 635,-


517 S/G 17 mm 20 mm 500/20 A, S 585,-

522 S/G 22 mm 25 mm 500/25 A, B, S 614,-


517 S/CB 17 mm 20 mm 500/20 A, S 695,-

522 S/CB 22 mm 25 mm 500/25 A, B, S 725,-

Type M-Height2) F-Height Frame-type € / m2 1)

517 S/GCB 17 mm 20 mm 500/20 A, S 639,-

522 S/GCB 22 mm 25 mm 500/25 A, B, S 670,-

emcoMARSCHALL entrance matting with coarse fibre ribbed and rubber inlay (RG)

emcoMARSCHALL entrance matting with coarse fibre ribbed inlays and cassette brushes (RCB)

emcoMARSCHALL entrance matting with rubber inlay (G)

emcoMARSCHALL entrance matting with cassette brushes (CB)

emcoMARSCHALL entrance matting with rubber inlay and cassette brushes (GCB)



emcoDIPLOMAT entrance matting with textile brush inlay (TB)

GreyCassette brush colours:


517 S/TB 17 mm 20 mm 500/20 A, S 585,-

522 S/TB 22 mm 25 mm 500/20 A, B, S 614,-


Black


emcoRADIAL entrance matting with ribbed inlays (R) Type M-Height F-Height Frame-type € / m2 1)

522 RD/R 22 mm 25 mm 500/25 A, B, S 905,-



42 47,5

35

30 5

42 47,5

35

30 5

42 47,5

35

30 5

42

47,5

35

30 5

42

47,5

35

30 5

45

22 25

42 47,5

35

30 5

emcoentrance matting – PLAZA and ECOLINE® PIONEER


542 S/R 42 mm 47,5 mm 500/46 S 742,-

emcoPLAZA entrance matting with coarse fibre ribbed inlay (R)


542 S/RG 42 mm 47,5 mm 500/46 S 779,-

emcoPLAZA entrance matting with coarse fibre ribbed and rubber inlay (RG)


542 S/RCB 42 mm 47,5 mm 500/46 S 839,-

emcoPLAZA entrance matting with coarse fibre ribbed inlay and cassette brushes (RCB)


542 S/G 42 mm 47,5 mm 500/46 S 820,-

emcoPLAZA entrance matting with rubber inlay (G)


542 S/CB 42 mm 47,5 mm 500/46 S 932,-

emcoPLAZA entrance matting with cassette brushes (CB)


542 S/GCB 42 mm 47,5 mm 500/46 S 875,-

emcoPLAZA entrance matting with rubber inlay and cassette brushes (GCB)

Frame-type: A = Aluminium, B = Brass, S = Stainless steel (V2A)

1) Price without frame 2) Actual mat height with CB inlays: + 1 to 2 mm






Black

Black


AnthraciteBrown

Type M-Height 2) F-Height Frame-type €/m2 1)

22 22 mm 25 mm 500/25 A, M, S on request

emco ECOLINE® PIONEER Desso AirMaster® technology inside

GreyBeige

Inserts colours:


37

17 20

37

17 20

37

17 20

50 5 3

2522

28

22 25

28

50 5 56 3

50 5 59,5 3

2528

22

22

50 5 3

25

28

22 25

28

5 352

6

Frame-type: A = Aluminium, B = Brass, S = Stainless steel (V2A) 1) Price without frame 3) Strengthened aluminium profile

emcoentrance matting – SENATOR, GS 517

emcoGS 517 entrance matting with textile brush (GS/TB) Type M-Height F-Height Frame-type € / m2 1)

GS 517/TB 17 mm 20 mm 500/20 A, S 495,-

emcoGS 517 entrance matting with the MAXIMUS inlay (GS/M) Type M-Height F-Height Frame-type € / m2 1)

GS 517/M 17 mm 20 mm 500/20 A, S 430,-

In 12 standard colours (standard designs) see page 8

emcoGS 517 entrance matting with rubber inlays (GS/G) Type M-Height F-Height Frame-type € / m2 1)

GS 517/G 17 mm 20 mm 500/20 A, S 499,-

GreyAnthraciteColours:


522 WS/R 22 mm 25 mm 500/25 A, B, S 539,-

emcoSENATOR 522 entrance matting with wider ribbed carpet inlays (WS/R 3))


emcoSENATOR 522 entrance matting with wider ribbed carpet inlays (W/R) Type M-Height F-Height Frame-type € / m2 1)

522 W/R 22 mm 25 mm 500/25 A, B, S 399,-


emcoSENATOR 522 entrance matting with wider ribbed carpet inlays and brush strips (W/RB) Type M-Height F-Height Frame-type € / m2 1)

522 W/RB 22 mm 25 mm 500/25 A, B, S 539,-



522 W/RK 22 mm 25 mm 500/25 A, B, S 458,-

emcoSENATOR 522 entrance matting with wider ribbed carpet inlays and scraper bar (W/RK)


emco 522 entrance matting with MAXIMUS inlay (W/M) Type M-Height F-Height Frame-type € / m2 1)

522 W/M 22 mm 25 mm 500/25 A, B, S 482,-

Senator also with Maximus inlays (M) in 12 standard colours (standard designs); see page 8. Available with individual logo print: price on request.

Right reserved to make technical changes: 01.01.2014

22 252528 22

22 25

529

15 18

emcoentrance matting – KADETT, ASSISTENT, honeycomb matting and clean-off systems ATTACHÉ

emcoclean-off systems ATTACHÉ (RS) Type Supplied as € / m2 1)

ATTACHÉ (RS) mat* 92,-

emcoSTRUCTURA 220 honeycomb matting without brushes Type Frame-type € / m2 1)

Structura 220 (1500 x 1000 mm) 500/25 A, B, S 79,- (piece)

Structura 220 (rectangular) 500/25 A, B, S 82,-

Structura 220 (special size) 500/25 A, B, S 97,-

Matting height: 22 mm, Frame height: 25 mm

emcoSTRUCTURA 220 honeycomb matting with brushes Type Frame-type € / m2 1)

Structura 220 B (1500 x 1000 mm) 500/25 A, B, S 469,- (piece)

Structura 220 B (rectangular) 500/25 A, B, S 345,-

Structura 220 B (special size) 500/25 A, B, S 361,-

Brushes, loose per 100 0,50 (each)

RedGreenGrey YellowBlue


* max. 2000 x 3500 mm

Black

Colours:

Frame-type: A = Aluminium, B = Brass, S = Stainless steel (V2A)

1) Price without frame

emcoKADETT plastic matting with coarse fibre ribbed inlays 515 R Type M-Height F-Height Frame-type € / m2 1)

515 R 15 mm 18 mm 500/18 A 369,-


emcoASSISTENT 560 Latex backed matting Type Frame-type € / m2 1)

560 (cut length) 500/25 A, B, S 129,-


AnthraciteColours: BeigeLight Grey

Flame retardant rib carpet inlay in Light Grey or Anthracite Types € /m2

DIPLOMAT 517 R, 522 R, 527 R, MARSCHALL 517 S/R, 522 S/R, PLAZA 542 S/R RADIAL 522 RD/R

Price on request

Flame retardant rubber inlay Types € /m2

DIPLOMAT 517 G, 522 G, 527 G, MARSCHALL 517 S/G, 522 S/G, PLAZA 542 S/G RADIAL 522 RD/G

Price on request

Orders whose net value is below € 100 are subject to an extra charge for small quantities of € 25.




302,8

52

2225

50

101722

30

12

827

15,5

18 20 25 30 47

,5

3

20 25 30 46

3

25 30

3

emcoentrance matting – Coarse fibre rib colours, MAXIMUS colours and accessories

Rib colours (standard and special colours)

Maximus colours

Type H x W x D in mm € / lm

500/20 20 x 25 x 3 35,-

500/25 25 x 30 x 3 37,-

500/30 30 x 25 x 3 40,-

500/46 46 x 25 x 3 63,-

Type H x W x D in mm € / lm

500/25 25 x 25 x 3 53,-

500/30 30 x 30 x 3 61,-

Frame Stainless steel (V2A)

Frame Brass

Frame LUMINA (Aluminium) Type H x W x D in mm €

LUMINA 25 x 30 x 52 x 2,8323,- (with LED) lm

Transformer necessary 93,-

LUMINA 25 x 30 x 52 x 2,8 75,- (without LED) lm

Replacement rib inlays € / lm – Price on request

ramp edge (Aluminium) Type M-Height Material- Thickness € / lm

Ramp edge 10 mm 1,5 mm 36,-

Ramp edge 17 mm 1,5 mm 37,-

Frame Aluminium Type H x W x D in mm € / lm

500/13 15,5 x 25 x 3 15,-

500/18 18 x 28 x 3 15,-

500/20 20 x 30 x 3 16,-

500/25 25 x 28 x 3 16,-

500/30 30 x 30 x 3 17,-

500/46 47,5 x 35 x 4,5 44,-

Frame LUMINA VIA (Aluminium) Type H x W x D in mm €

LUMINA VIA 30 x 12 x27 Price on request

Light GreyNo. 220

BeigeNo. 420

Mauve*No. 374

Blue Grey*No. 113

Brown*No. 445

Red*No. 305

Turquoise*No. 050

Royal Blue*No. 100

Sand*No. 430

Grape*No. 112

*10% Surcharge for special colours. (Special colours not available for emco Diplomat 510)

BlackNo. 80.01

AnthraciteNo. 80.02

GreyNo. 80.03

BrownNo. 80.04

BeigeNo. 80.05

BlueNo. 80.06

RedNo. 80.07

Blackmottled No. 81.01

AnthracitemottledNo. 81.02

GreymottledNo. 81.03

BrownmottledNo. 81.04

Beige mottledNo. 81.05

AnthraciteNo. 200

BlueNo. 114


Max. 300

Well width

53-9

6

Appr

ox 6

1-10

4

50

15

30

1,5

17 22 27

10

42

emcoentrance matting – Accessories

Cover strip (Stainless steel (V2A)) Type M-Height Material- Thickness € / lm

Cover strip 10 mm 1,5 mm 37,-





T-bar (Aluminium) Type M-Height Material- Thickness € / lm

T-bar 16 mm 16 mm 1,2 mm 15,-

T-bar 21 mm 21 mm 1,2 mm 16,-

Dirt collection and drainage wells Type Height Width € / m2

5000 53 mm 2800 mm 427,-

5017 70 mm 2800 mm 427,-

5022 75 mm 2800 mm 427,-

5042 96 mm 2700 mm 427,-

Drainage outlet per piece 10,-

Stainless steel profile Profile width M-Height Material- Thickness € / Im

50 mm 21,5 mm 1,5 mm 133,-

50 mm 16,5 mm 1,5 mm 133,-

Surcharge per letter 9,-/each

Type €/each

MPS Presentation stand, including 5 mats and brochure box (total dimensions: app. 200 cm high x 105 cm wide x 85 cm deep)

Equipped with• emco DIPLOMAT 522 CB• emco SENATOR 522 W/R with stainless steel profile• emco DIPLOMAT 522 GB• emco DIPLOMAT 510 TB • emco DIPLOMAT 522 R• Type of frame Type 500/N (dimensions W 600 x D 400 mm) Mat sample sizes W 587 x D 389 mm

525,- Net

Type MatW x D in mm

Mat€/each

FrameH x W x D in mm Frame Frame

€/each

522 R 587 x 389 84,- 26,5 x 600 x 400 Frame Type 500/N

Aluminium without wall anchors

29,-

522 R 787 x 489 142,- 26,5 x 800 x 500 37,-

522 R 887 x 589 194,- 26,5 x 900 x 600 43,-

522 R 987 x 589 217,- 26,5 x 1000 x 600 Aluminium 500/N Frames not

assembled with corner brackets, nuts and bolts.

47,-

522 R 987 x 787 289,- 26,5 x 1000 x 800 51,-

522 R 987 x 987 316, - 26,5 x 1000 x 1000 57,-

522 R 1187 x 787 347,- 26,5 x 1200 x 800 57,-

emco DIPLOMAT mats in standard sizes with ribbed inlays

emco sales support for mats in standard sizes

Standard aluminium (also available in stainless steel. Price on request)

Available in standard colours see page 8


Pricing 1. For standard sizes: The size of matting and frames designed as a simple square or rectangle (90° corners) is calculated by multiplying the width by the depth. The current list price is used. 2. For bespoke sizes: Price calculation a) Matting under 2 m2 in area:

The price is calculated on the basis of the full square.

b) Matting over 2 m2 in area: The price is calculated on the basis of the actual mat dimensions.

Cutouts, e.g. for door closers, are included in the matting area calculation.

Product Type Description Mats (in €) Frame (in €)

DIPLOMAT all

Surcharge for cutouts(round/squareprice each)

57,- 34,-MARSCHALL 517S/522S 57,- 34,-

PLAZA 542S 109,- 103,-SENATOR all 57,- 34,-ECOLINE 22 57,- 34,-

DIPLOMAT all

Surcharge for curving(Price per lm)

86,- 51,-MARSCHALL 517S/522S 86,- 51,-

PLAZA 542S 169,- 104,-SENATOR all 86,- 51,-ECOLINE 22 86,- 51,-

DIPLOMAT all

Surcharge for shaping(Price per lm)

86,- *20,-MARSCHALL 517S/522S 86,- *20,-

PLAZA 542S 169,- **28,-SENATOR all 86,- 20,-ECOLINE 22 86,- 20,-

Measuring If frame is to be supplied: Please state outer dimensions of frame.

If frame is already fitted: Please state inner dimensions of frame.

*20,- €/each per additional corner (standard: 4 corners/frame) **28,- €/each per additional corner (standard: 4 corners/frame)

Square and round cutouts

Curves Diagonal

emcoentrance matting – Special designs and accessories

mmmm

mm

mm

mm

mm

mm

mm

mm

mm

mm

mm

width in mm

width in mm

width in mm

dept

h in

mm

dept

h in

mm

Dire

ctio

n of

Tra

ffic

*** all entrance matting systems in the area of automatic door systems must allow a profile distance of 4 mm according to DIN 18650 (EN16005)

Product Type Description € / m2

DIPLOMAT

all

Surcharge for a

3 mm profiledistance ( instead

of 5 mm )***

+ 8%

MARSCHALLPLAZA

RADIALSENATORECOLINE

Surcharge for areas inside automatic door systems.


General Terms and Conditions of Sale, Delivery and Payment

1. Introduction: These General Terms and Conditions of Sale, Delivery and Payment shall apply exclusively unless they are amended in any express written agreement. Quotations, acceptance of quotations or sale of any goods shall be subject to these terms and conditions. Any terms and conditions of the purchaser or provisions of the purchaser that are contradictory to these terms and conditions shall, even if they are known, be rejected. These terms and conditions shall furthermore provide the basis for all future transactions. Notice pursuant to Section 33 of the Federal German Data Protection Act (BDSG): Personal data from contracts shall also be held on computer.

2. Orders and quotations: All user quotations and delivery options are subject to confirmation. Orders shall only be deemed to have been accepted if they are accepted in writing within 21 days of submission (also by invoice or delivery note). The scope of delivery shall be governed exclusively by the written order confirmation. The purchaser shall bear responsibility for the accuracy of the order. If goods need to be manufactured, processed or treated, the purchaser shall be required to make good any damage that is caused because such contractually agreed processing or treatment of the goods, carried out on the basis of the purchaser‘s specification, is shown to be a breach of patent, copyright, trademark or other property right of a third party.

3. Prices and pricing: Unless prices are agreed for products, the list prices, plus value-added tax, shall apply that are in effect on the day of delivery. All prices are ex-works and exclude packaging. Tolerances in quantities delivered shall be permissible if they are in a reasonable proportion to the total quantity (plus/minus 10%).

4. Delivery of goods: Deliveries shall be made ex-works for the account and at the expense of the purchaser. If goods are kept in store for the sole disposal of the purchaser (calloff items), the purchaser shall be in default if, without being reminded, it fails to take delivery of such goods within the agreed period.

5. Delivery time: The delivery dates or delivery periods stated in the order confirmation indicate the earliest possible delivery time and are without obligation. Set calendar delivery dates shall only be binding if they have been expressly confirmed in writing. Delivery periods shall commence on the day on which the order confirmation is dispatched, however not before the submission of any documents, approvals, clearances to be furnished by the purchaser or before receipt of any agreed deposit payment. The delivery period is met once the goods have left the factory or notice is given that they are ready for shipment.

6. Passing of risk: The risk of goods becoming damaged or lost shall pass to the purchaser as soon as the goods have left the user‘s factory, this also being the case if part shipments are made. If the user has undertaken to deliver the goods to the purchaser, the purchaser shall bear the risk of transportation even if Incoterms to the contrary are agreed. If shipment is delayed for circumstances for which the purchaser is responsible, the risk shall pass to the purchaser as from the day on which the goods are ready for shipment. Goods shall be stored on the purchaser‘s account and at the purchaser‘s risk. Items delivered must be accepted by the purchaser without prejudice to the purchaser‘s rights.

7. Notification of defects: It shall not be possible to give notice of defects that the purchaser could have established if care had been exercised when delivery was taken or initial sample inspection had taken place. Even if selection samples have been sent, the purchaser must inspect the goods without delay on arrival and give notice of any defects in writing or the warranty will be void. Notice of complaints must be given in writing before the goods are processed, contain an exact description of the alleged claim or flaw and be accompanied by packing slips. The quality of the goods shall be considered to have been approved if the user does not receive a written notice of defects within 7 working days of the goods arriving.

8. Warranty: The user shall not assume any responsibility for the good being suitable for a specific purpose. If the item supplied is faulty or if it lacks warranted qualities or if it becomes defective within a warranty period as a result of manufacturing or material flaws, the user shall, in its equitably exercised discretion, be able to rectify defects or make a new delivery on return of goods already delivered. If it is not possible to remedy the defect or if such would involve unreasonable effort and expense, the purchaser may only demand a reduction in payment. The purchaser shall, by way of exception, also be able to demand a reduction in payment if it cannot be reasonably expected to remedy the defect. The user must be given the opportunity to locate the defect brought to its notice. On request, complaint goods must be returned without delay. Replaced parts shall become the property of the user. The latter

shall take no responsibility for inappropriate or improper use, for incorrect assembly or repair by the purchaser or third party, for natural wear, improper or negligent treatment or for improper maintenance. If rectification is made by the purchaser or any third party, the user shall not be liable for any consequences that may arise therefrom. The same shall apply to any modifications that are made to the delivery item without the user‘s prior consent. If, within a reasonable period, warranty obligations are not met or not met in the manner agreed, the purchaser shall be able to set a final deadline in writing. If this deadline expires without result, the purchaser shall be able to make the necessary rectification itself or place rectification in the hands of a third party. If rectification has been carried out successfully by the purchaser or a third party, all claims on the part of the purchaser shall be settled upon reimbursement of the costs incurred by it. Only the user‘s product description shall be considered as the agreed quality of the goods. If the purchaser receives deficient assembly instructions, the user shall only be obliged to supply assembly instructions free of any deficiency if the deficiency in the assembly instructions prevents proper assembly.

9. Restrictions on liability: If the purchaser incurs damage as a result of a delay for which the user is responsible, the purchaser shall, to the exclusion of further claims, be entitled to demand compensation for damage caused by the delay. This shall amount to 0.5 per cent for each full week, however in total no more than 5 per cent of the value of that part of the overall shipment which, on account of the delay, cannot be used in time or as agreed. If, through fault on the part of the user as a result of failing to implement or of incorrectly implementing proposals or deliberations coming about before or after entering the contract, or as a result of infringing other contractual accessory obligations – in particular, instructions on operating and maintaining the delivery item – the delivery item cannot be used by the purchaser as agreed, the arrangements set forth in clause 8 of these terms and conditions and the following arrangements shall be applicable to the exclusion of further claims. The user shall only be liable for damage, including damage not occurring on the delivery item itself, if such is caused as a result of intent, of gross negligence, of a culpable harm to life, limb and health, of defects that the user has fraudulently concealed or whose absence it has guaranteed, of defects in the delivery item insofar as product liability law provides for liability for personal injury and damage to property caused by privately used objects. Liability for each occurrence of damage - for whatever legal ground - shall be limited to an amount of 30% of the order value. Any liability above and beyond this amount shall be ruled out.

10. Acts of God: Acts of God, industrial disputes, riots, gov-ernmentaction, delivery stoppages or other unforeseeable, unpreventable and serious events shall release the user from its obligations for the duration of the disturbance and to the extent of the effect this disturbance has. This shall also apply if these events occur at a time at which the user is in default. The user shall, to the extent reasonably expected of it, immediately provide the necessary information and adapt its obligations in good faith to the changed circumstances.

11. Terms of payment: Unless otherwise agreed, all payments shall be due in the full amount upon delivery or upon acceptance of delivery. Without further notification, the purchaser shall be in arrears 30 days after the due date if payment is not made. The user grants 3% cash discount on payments made within 7 days of the invoice date provided the purchaser is not in arrears with the settlement of accounts receivables from preceding consignments of goods at the time of payment. If payment, or also part thereof, is not received by the user within 30 days, the purchaser shall not be entitled to cash discount. Bills of exchange will only be accepted on the basis of written agreement and only on account of performance without liability for protest. The purchaser may not offset counterclaims and has no right of retention on the basis of these claims unless the purchaser‘s claims are undisputed or final and absolute.

12. Default in payment and deterioration in purchaser solvency: If the purchaser is in arrears with the payment of amounts invoiced for transactions already delivered, the user shall be able to make delivery of outstanding orders contingent on the settlement of due invoices or on advance payment of the purchase price or withdraw from the contract. The same right shall exist if, after entering the contract, a significant deterioration becomes known in the purchaser‘s financial cir-cumstances. The agreed payment dates must still be observed even if warranty claims are put forward. In the event that the purchaser defaults in payment and composition or insolv ency proceedings are instigated against it in or out of court, discounts granted as well as freight reimbursements shall be withdrawn. The same legal consequences shall ensue on the 31st day after the invoice becomes due.

13. Retention of title: The goods delivered by the user shall remain the user‘s property until it receives all payments due to it from the business relationship with the purchaser. If the purchaser acts in breach of contract, in particular if the purchaser falls into arrears, the delivery item may be repossessed; the purchaser shall undertake to surrender possession; it shall allow the user to collect and repossess its goods at any time. Repossessing a delivery item does not equate to withdrawing from the contract unless such is expressly declared in writing. In the event of attachment or other intervention by third parties, the purchaser shall be required to provide immediate notification so that opposition proceedings can be instituted to prevent execution. If the third party is not in a position to reimburse the judicial and extra-judicial costs of opposition proceedings, the purchaser shall be liable for the arising loss. The purchaser shall be entitled to resell the delivery item in the ordinary course of business. Even at this stage, the purchaser assigns to the user all claims against its buyers or third parties in the amount of the final invoice balance, including valueadded tax, that arise from the resale, regardless of whether the goods have been resold without having been processed or after they have been processed. The purchaser is empowered to collect such claims even after assignment unless the user prohibits the purchaser from doing so. The user‘s power to collect the claim itself shall remain unaffected. The user shall, however, undertake not to collect the claim itself as long as the purchaser duly meets it payment obligations and is not in arrears. The user shall, at all events, be able to demand that the purchaser disclose the assigned claim and its debtors, provide all information necessary for collection, hand over the associated documents and notify the debtors of the assignment. The purchaser shall only process or refashion the goods for the user. If the goods are processed with other items, the user shall acquire joint ownership of the new article in the proportion of the value of the retained goods to the other processed items at the time of processing. In all other respects, the same shall apply to the article that is created as a result of processing as applies to the retained goods. If the goods are inseparably combined with other items, the user shall acquire joint ownership of the new article in the relation of the value of the goods to the other combined items at the time of combination. If combination takes place in such a manner that the purchaser‘s article must be regarded as the primary article, it shall be considered as agreed that the purchaser will assign proportional joint ownership to the user. The purchaser preserves sole ownership or joint ownership. The purchaser shall assign any claim to security accruing to it against any third party as a result ofcombi-ning the goods with a piece of land.

14. Resale clause: The goods supplied may only be exported to those countries for which written clearance is given. Without consent, the purchaser must not sell to buyers known to have the intention of exporting the goods. This ban shall only apply if and to the extent by which it is covered by the EU Com-mission‘s notice on agreements of minor significance. In cases where goods are delivered abroad, the purchaser shall bear any risk arising from the applicability of laws and statutes in force abroad.

15. Warranty period and statute of limitation: The warranty period shall be 12 months from the time at which the goods are delivered under clause 4 of these terms and conditions. However, the consequences set forth in clause 7 of these terms and conditions shall apply if the purchaser fails to provide notification of the defect in good time. The warranty period for goods which, in accordance with their normal usage, have been used for an edifice and have caused its defectiveness, shall be five years. All claims on the part of the purchaser – for whatever legal grounds, in particular claims for damages on account of goods being defective - shall become statute-barred after 12 months from the time of delivery.

16. Place of performance, legal venue and applicable law: The place of performance for all obligations arising from the contractual relationship shall be the place of business of the user. If the purchaser is a merchant, a legal person under public law or a special asset under public law, the legal venue for all legal disputes, including those arising as part of proceedings related to a bill of exchange or cheque, shall be the place of business of the user. The user shall also have the right to take legal action at the seat of the court having jurisdiction over the purchaser or at any other court that may have jurisdiction under national or international law. The contractual relationship shall be subject to German law. Application of the UNCITRAL sales convention (United Nations convention on the international sales of goods) shall be excluded.

17. Escape clause: Should individual provisions of these General Terms and Conditions of Sale, Delivery and Payment be or become ineffective, this shall not affect the validity of the remaining provisions.


Pricelist 2014, valid as of January 1, 2014. Prices are shown in Euro exclusive of VAT, carriage, insurance and packing costs. On publication of this price list all previous pricelists become invalid.

The right to price and technical changes are retained.

www.emco.de UK

855-

4680

/ 0

1.14

Righ

t res

erve

d to

mak

e te

chni

cal c

hang

es.

emco Bau- und Klimatechnik GmbH & Co. KG Postfach 1860 D-49803 Lingen (Ems) Germany Tel. +49 (0) 591 9140-0 Fax +49 (0) 591 9140-852 [email protected]

emco entrance mat systems - Matting AB · PDF filePrice list 2014 emco entrance mat systems...

Documents

Transcript of emco entrance mat systems - Matting AB · PDF filePrice list 2014 emco entrance mat systems...