8” x 10 Yards

HBW

ST-8

E M B R O I D E R Y S T A B I L I Z E R

washaway

• Stitcher’s favorite!

• This water-soluble topping has a

textured finish for ease of

handling and will not stick to the

embroidery foot

• Excess tears away easily; remove

remnants by dabbing with water

• Use on top of item during

embroidery to keep stitches from

sinking into the nap of the fabric

StitcH2O

Country of Origin: U

K

Product Usage Instructions

• Cut a piece of StitcH2O Topping at least 2” larger than your design.• Place StitcH2O Topping on top of the fabric, centered over the

design area.• To hold StitcH2O in place temporarily: - Use Expert Embroidery Tape at the four corners to hold StitcH2O in place. OR - Lightly moisten the four corners of the StitcH2O and stick to the

background fabric. OR - Stitch in place with a basting stitch using the machine’s basting

function.

REMOVAL INSTRUCTIONS:• Remove the embroidery from the hoop.• Gently tear or trim away excess StitcH2O topping while supporting

the stitches between the thumb and finger. Most of the StitcH2O topping should tear away.

• Rinse away any remaining residue with warm wet cloth.

www.OESD.com

StitcH2OWashAway Topping