Elwaleed Mursi C.V Dec16

Elwaleed Mursi Salman Talaba ■ E-mail: [email protected] Abu Dhabi, UAE ■ Cell: +971 50 5966530

OBJECTIVE

A senior position within a progressive organization whereby I can prove my capabilities and personal skills that will positively contribute to my performance / achievements and the company success by maintaining a firm focus on assured bottom line gains and distinguished company performance.

KEY SKILLS

■Mechanical Engineer ■Mechanical Problems solving ■Mechanical design ■Quality Engineer ■Radioactive Maintenance specialist ■3rd party Lead Auditor ■Risk Management ■ Lead Instructor trainer for Safety courses ■Public Speaking Safety-Quality Meetings ■ LPT/Audit Campaigns ■ Time Management ■Problem-solving ■ Self-motivated experience ■HAZMAT experience (Radioactive, Batteries, Pressure) ■Advanced HSE experience ■ Mechanical failures troubleshooting ■Corrosion Management ■Lean and 6S skills ■Repair and maintenance

PROFESSIONAL EXPERIENCE

November 2004 – December 2016Schlumberger Middle East, Abu Dhabi

Job Scope:January 2015 – Dec 2016 Radioactive maintenance Specialist

Key Responsibilities:

Ensure that all radiation related assets, equipment and accessories are properly maintained and prepared for the wellsite in a timely and comprehensive manner. This includes:

Radioactive sources assemblies. Radioactive sources shields (Including required markings and labelling). Over packs (Including required markings and labelling). Radiation monitoring meters (Including calibration). Radiation mud monitors (Including calibration). All Calibration associated equipment (Including blocks, tanks and other auxiliary equip.) Source handling and loading tools. Fishing kits. Emergency shields. Wipe test kits and equipment.

Ensure all lifting gears associated with all radiation related equipment is fit for purpose, controlled, certified and compliant with all SLB mechanical lifting standards and local regulatory requirements.

1


Ensure lifting and auxiliary equipment inside the location radioactive source storage area properly maintained and certified.

Ensure that all source storage pits and cabinets are maintained and secured in accordance with Schlumberger standards.

Ensure all radioactive related equipment are input into the QTRAC and use QTRAC to track all maintenance performed.

Ensure that all radiation related equipment has defined service level and intervals in QTRAC. Ensure that all location related equipment movement to and from facility are tracked in QTRAC

and RMIS. Work closely with location RSO to ensure that from radiation equipment perspective QTRAC=

RMIS=Actual physical inventory. Set’s up all location nuclear calibration ensuring everything required is available and in a good

working order. Also ensure consistency in the setup of calibration. Has overall responsibility for the location calibration area ensuring all necessary equipment is

available in good working order and that housekeeping within this area is at the acceptable level. Ensure that complete set of equipment and special tool is available and dedicated to the

performance of leak test and photo inventory. Assist the location RSO (Radiation safety officer) in quarterly self-assessments against the D&M

Radiation standard ensuring that results and RWP are recorded in Quest and that the action items are acted upon and implemented in timely manner.

Coordinates and assist field engineer in nuclear tools calibrations. Coordinates and assists field engineers in performing leak tests. Coordinates and assists field engineers in performing photo inventory.

January 2010 – December 2014 LWD Maintenance mechanical team leader

Key Responsibilities:

Works on various tool modules to develop expertise and support the day-to-day activities of the location.

Observes safe-working practices, follows Schlumberger HSE, SQ and IT standards, and wears all personal protective equipment (PPE) as required.

Supervises the maintenance of D&M equipment. Conducts failure analysis when required; follows up on root causes. Understands the functions and role of the other teams within the maintenance facility, liaises and

co-ordinates joint operations with other team leaders / supervisors. Is responsible for the direct supervision of his team in order to ensure smooth completion of tasks

on a day-to-day basis. Follows predefined D&M Work Processes (QTRAC) and ensures all team members understand their

responsibilities. Performs risk assessments (HARC) on an on-going basis and for any new equipment being introduced

into the location. Failures Investigation with line management and technology center (when appropriate). Assists with the ordering of parts and setting of minimum M&S (materials and spares) stock. Rresponsible for the development of maintenance staff and the tracking of their progress. Supervise preventive maintenance protocol through an operating hours tracking system. Supervise modification on tools based on product center newly released technical alerts and FCOs. Liaises with personnel department with regard to Technician recruiting when requested by line

management; Forecasts upcoming Maintenance personal needs.

2


Promotes respect of management procedures, technical standards, work instructions and Uniform Operating Procedures in all technical areas.

Responsible for the equipment planning and ordering. Capture and investigate Non-conformances with regards to root cause, and follow up with the

implementation of corrective actions Establishing processes and monitor the progress in quality assurance activities Mentoring for new hires and the cross training program candidates. Participate in preparing quality / inspection plans based on clients requirements Supervise all tools mechanical threads and body inspections as per SLB and other standers (API,

DS-1, etc.) and plan advanced repair when needed in external M.S.

November 2004 – December 2009 LWD Maintenance Mechanical Engineer

Key Responsibilities: Works without supervision on the modules he is proficient in. Follows and implements the R&M process (QTRAC) and utilizes appropriate maintenance manuals

and procedures including relevant use of QTRAC and associated paperwork. Keeps up-to-date with mod-recaps, TIR’s and the implementation of these in tools. Plans ahead to ensure timely completion of work orders Actively participates in knowledge sharing and reuse. Proactively monitors use, and re-ordering of required inventory and spare parts. Follows and complies with all Schlumberger and D&M policies, wears all personal protective

equipment (PPE) as required. Plans ahead to ensure timely completion of work orders. Starts as MTT then developed to MT1, then MT2 and Finally MT3 (Maintenance expert)

KEY TRANINGS TO CREDIT

SLB Training Courses:-

Technician and workmanship standards Level 1 in Mussafah (United Arab Emirates).

Technician Level 2 and Level3 EcoScope Mechanical training in SRPC France.

Technician Level 2 ArcVision mechanical training in UTC United kingdom.

Technician Level 2 Geovision resistivity (GVR) mechanical training in MLC in UAE.

OJT on Stethoscope 675, 825 and 475 (FPWD) training in Saudi Arabia.

OJT on Provision (NMR) in Saudi Arabia.

Technician Level 2 training SADN8 mechanical in MLC in UAE.

Technician Level 2 SonicScope mechanical in MLC in UAE.

Technicial Level 2 SonicVision mechanical in MLC in UAE.

Technician Level 2 in Microscope Mechanical in MLC in UAE.

Technician Level 2 in mechanical ADNVision in MLC in UAE.

3


Technician Level 4 Maintenance supervisor training in MLC in UAE.

Radioactive maintenance specialist Level 4 training in Scotland.

Shock and vibration advanced training.

Lean advanced training.

ESD (Electrostatic discharge) training.

OFS3 managing and leading people training.

QHSE Level 1 and 2 courses in Schlumberger.

HSE Training Courses:-

HSE 2 in house training in SLB. Auditing Level 3 ( Third Party) Dubai PTW Level 2 (Third Party) Abu Dhabi Pressure Level 2 in house training Radiation Level 2 in house training Mechanical Lifting Level 2 in house training Injury Prevention Level 2 (Third party) Dubai Observation Intervention Level 2 in house training Overhead Crane operator Level 3 in SLB. Forklift driving Level 2 in SLB. Breakout machine operation level 2 in SLB. Jar testing machine training Level 2 in SLB.

Accomplished HSE trainings conducted

CTC (commentary task coach) training. Dropped Object campaign. Stress Management campaign Overhead crane training. Mechanical lifting Level 1 and 2 training. Observation and intervention training Level 2 training.

EDUCATION

• Diploma in Civil Engineering, University of Engineering in Khartoom, Sudan for Class 1998. • B.Sc in economics and statistics, University of Neilin in Khartoom, Sudan for class 2002.

4


COMPUTER SKILLS

Fluent in Microsoft Office software (Word, Excel, PowerPoint) and Visio.Fluent in Windows OS and Intermediate with Linux OS

PERSONAL INFORMATION

Birth Date: June 10, 1970 Gender: Male Nationality: Sudanese Languages: English, Arabic and Aurdo Email: [email protected] Contact number: +971 50 5966530

REFERENCES FURNISHED UPON REQUEST

5

Elwaleed Mursi C.V Dec16

Documents

Transcript of Elwaleed Mursi C.V Dec16