ElViS III S8/P8 | Surface Vibrator Sourcegeotomographie.de/assets/equipment/Productsheet-Elvis.pdfe...
1
e Vibrator Source ElViS III is used to generate P- or S-wave sweep signals. e source consists of a moving mass driven by a cascaded linear motor. e source is fully cased. An adjustable pneumatic suspension ensures a maximum release of seismic energy under different surface conditions. e source is most suitable for reection seismic surveys on paved roads and for urban areas. Technical Details Data Example 70 60 50 30 20 10 0 Distance m] Depth [m] ElViS III S8/P8 | Surface Vibrator Source Design: Geosym GmbH Generated wave types: P/S Power supply: 12 or 24 V DC Drive system: Cascaded linear motor Peak force: Approx. 450 N Frequency range (P): 20-400 Hz Frequency range (SH): 20-320 Hz Investigation depth (P): Up to 100-150 m (depending on geology) Investigation depth (SH): Up to 60-100 m (depending on geology) Source weight: 35 kg Total weight: 130 kg e vibrator source with active vertical vibrator kit (mounted) and additional horizontal vibrator kit (right side). 40 80 90 100 0 20 30 40 50 60 70 80 10 90 S-wave reection seismic section.
Transcript of ElViS III S8/P8 | Surface Vibrator Sourcegeotomographie.de/assets/equipment/Productsheet-Elvis.pdfe...
e Vibrator Source ElViS III is used to generate P- or S-wave sweep signals. e source consists of a moving mass driven by a cascaded linear motor. e source is fully cased. An adjustable pneumatic suspension ensures a maximum release of seismic energy under different surface conditions. e source is most suitable for re�ection seismic surveys on paved roads and for urban areas.
Technical Details
Data Example
70
60
50
3020
10
0
Distance m]
Dep
th [m
]
ElViS III S8/P8 | Surface Vibrator Source
Design: Geosym GmbHGenerated wave types: P/SPower supply: 12 or 24 V DCDrive system: Cascaded linear motorPeak force: Approx. 450 NFrequency range (P): 20-400 HzFrequency range (SH): 20-320 HzInvestigation depth (P): Up to 100-150 m(depending on geology)Investigation depth (SH): Up to 60-100 m(depending on geology)Source weight: 35 kgTotal weight: 130 kg
e vibrator source with active vertical vibrator kit (mounted) and additional horizontal vibrator kit (right side).
40
80
90100
0 20 30 40 50 60 70 8010 90
S-wave re�ection seismic section.
