Eliza Three Drawer-19-2-11 - Mocka - Australia · Eliza Three Drawer Assembly Instructions...

Eliza Three DrawerAssembly InstructionsThank you for your purchase.Please follow the instructions below for correct assembly.

mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558

1

Wall Strap

x2washer

ZY

wall anchor

x1

X

safetystrap x1

WV

screwx1

wallscrew

x1

WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake. Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device provided should fit most wall types, but please note that different wall materials may require different fixing devices from those supplied.

boltx25

x8

A B C D E F G H

J K L M N OI

Hardware Supplied

dowelx14

screwx36

sliderail x3

sliderail x3

sliderail x3

sliderail x3

lockingnut x25screw

x6

x8wedge

x3handle

x16screw bolt

x15screw

key x1Allen

For quicker assembly, we recommend the use of a power drill on a low-speed setting.

Phillips & Flathead screwdrivers

long

*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.

Eliza Three DrawerAssembly Instructions


2

1 2

Attach 3x slide rails (F) and 3x slide rails (G) to panels [3] and [4] as shown and secure with 18x screws (E). Insert 6x bolts (C) into panels [3] and [4]. Tighten with a screwdriver.

F

CL

E

Attach panels [5], [6] and [7] to panel [4] with 3x dowels (A) and secure with 3x locking nuts (D). Tighten with a screwdriver.

E F

GE

G

CR

E

C

C

AD

3

4

4

5

7

6

D

A



3

3 4

Attach panel [3] to the unit with 3x dowels (A) and secure with 3x locking nuts (D). Tighten with a screwdriver.

Slide panel [8] down along the grooves between the panels [3] and [4], to form the back of the unit as shown.

D

A

7

6

5

3

3

4

8

D

A



4

65

Attach panel [2] to panels [3] and [4] with 4x dowels (A) and secure with 4x long screws (B). Tighten with a screwdriver.

Attach 4x legs [9] to panel [2] and secure with 16x bolts (L). Tighten with an Allen Key (N).

A

B

L

2

3

4 2

9N

L

9



5

7 8

Slide panel [8] down along the grooves between the panels [3] and [4]. Insert 4x bolts (C) into panel [1] as shown. Tighten with a screwdriver.

C

8

3

4 1

Eliza Three Drawer


6

9 10 Drawers x3

Assembly Instructions

Attach panel [1] to panels [3] and [4] with 4x dowels (A) and secure with 4x locking nuts (D). Tighten with a screwdriver. Attach panel [6] to panel [1] and secure with 2x long screws (B). Tighten with a screwdriver.

Insert 5x bolts (C) into panel [10]. Tighten with a screwdriver. Attach panels [11], [12] and [13] to front panels [10] and secure with 5x locking nuts (D). Tighten with a screwdriver.

A

D

B

1

3

4

6

A

DC

D

10

10

11

12

13

D



7

12 Drawers x311 Drawers x3

Slide panel [14] along the grooves between the side panels [11] and [12] to form the base of the drawer. Attach panels [11], [12], [13] and [15] as shown using 5x screws (M). Tighten with a screwdriver.

Attach slide rail (I) and slide rail (H) to the underside of the side panels as shown. Secure with 4x screws (E) and tighten with a screwdriver. Attach handle (O) to panel [10] and secure with 2x screws (E). Tighten with a screwdriver.

EO

10

12E

H

I

11

EM

10 15

11

12

14

11

12



8

13 14

Insert the assembled drawers into the corresponding compartments as shown. Ensure the drawers slide easily along the rails.

Attach 8x wedges (J) into the corners of the back of the unit and secure with 8x screws (K). Tighten with a screwdriver. Attach 1x safety strap (V) to the top of the back side of the unit as shown using 1x washer (Z) and 1x screws (W). Tighten with a screwdriver.

10

V

WZ

J

K

1

JK

V

Z

W

16



9

15

Once assembled lift furniture into place, do not drag. Use a drill to create a small hole lining up with the top of the safety strap (V). Fasten to the wall using 1x washer (Z) , 1x wall anchor (X) and 1x wall screw (Y).

Ensure unit is balanced and steady before use. You’re done, enjoy!

XY

Z

1

X

YZ

Eliza Three Drawer-19-2-11 - Mocka - Australia · Eliza Three Drawer Assembly Instructions...

Documents

Transcript of Eliza Three Drawer-19-2-11 - Mocka - Australia · Eliza Three Drawer Assembly Instructions...