Elena T. Photography - Textures Tutorial
-
Upload
misselenat -
Category
Documents
-
view
216 -
download
1
description
Transcript of Elena T. Photography - Textures Tutorial
Thank you for downloading Jupiter and Mars, two textures
belonging to Elena T. Photography’s free Unconventional Macrocosms set.
F.A.Q. and Other Information
Ok, so, I downloaded the textures and they look like very strange
pictures. What am I supposed to do with them?!
First of all, thank you very much for downloading the textures and for reading this.
As much as textures look strange, they are also very useful if you wish to give your
pictures a nice artsy, “canvas-like” feel.
Here below you can see two before/afters, as well as a detailed (but very easy-to-
follow) tutorial that will allow you to start using your textures right after you’re
finished reading this little document.
Texture used: Jupiter Texture used: Mars
For this tutorial I have used PSE (PhotoShop Elements), but the instructions are very
similar for PhotoShop and GIMP as well. All screenshots will be available in the
Tutorials Screenshots folder – you can view them larger simply by clicking the “View
Larger” links I will place right below each picture.
I will edit the photo of the rose I posted above with “Jupiter” instead of “Mars”, so that
you can see how different textures give different results on the same picture.
It goes without saying that the same texture on different photos will also give
different results!
1. First of all, open a texture of your choice and the photo you want to add it to in
your program. You will see something like this:
View Larger
View Larger
2. Now, we want to place the texture right on our image. There are two ways to
achieve this: you can either use the Move Tool (see below which one it is) and,
holding your mouse, drag the texture right onto your picture (that is, onto the
tab with your picture’s name) and, when your photo appears, release your
mouse
Move Tool Rectangular Marquee Tool
or, more easily, use the Rectangular Marquee Tool (see above) to select the
texture and choose Edit Copy from the menu. Then go to your picture’s tab
and select Edit Paste. The texture will appear right on the picture, but you’ll
be able to see the two layers in the “Layers” window on the right, the
“Background” layer being your photograph and “Layer 1” being the texture.
Either using the Move Tool or the Copy/Paste function will lead you here.
View Larger
View Larger
3. Make sure you see the “Layers” window. If you don’t, select Window Layers
from your menu.
How to make the Layers window appear if you can’t see it anywhere
Now, from the “Layers” window, make sure “Layer 1” (the texture) is selected,
and click the arrow right next to “Normal” to make a menu appear, from which
you will be able to choose the blending mode of your texture.
I suggest you use Overlay, or Soft Light for a more subtle effect. Of course you
can also experiment with the other blending options – since I don’t know what
kind of pictures you are using, I’m suggesting the two effects I know will give
good results on almost any photo.
The blending mode selection
You’ll get something like this, which may already be good, depending on the
kind of work you were interested in creating. Supposing you want to reduce the
visibility of the effect and make it much more subtle, just go on reading!
View Larger
4. We now want to reduce the impact the overlaying texture has on our original
photograph: to do so, we simply adjust the Opacity. Always make sure “Layer
1” (the layer with the texture) is selected.
View Larger
Again, some of you will now be satisfied, others may want to remove the
texture from certain parts of the picture, for instance a face, or the main
subject of the photograph.
There are several ways to achieve this; I’ll show you the method I prefer, which
also happens to be the easiest one.
5. What I do is going back to my original texture (which was still open; if you
closed it, simply re-open it) and, with the Eyedropper Tool, select a mid-range
color on the texture, one that is not too dark nor too light. I normally choose
quite light colors; in this case, I picked a beige. My suggestion is to try different
colors to find out which one works best on that specific picture.
View Larger
When you are done choosing your color, go back to your texturized photograph
and, using the Brush Tool set to proper shape and size (this really depends on
how big the parts you want to remove the texture from are), paint over your
picture (as usual, make sure “Layer 1” is selected in the “Layers” window) in
order to remove the texture from it.
If the brush you selected is too small, simply adjust its size so that it takes only
a few seconds to remove the texture from faces or large parts of the image.
Reduce the size of your brush to clean borders and details, if needed.
For this tutorial I’m trying to keep things simple, but just so you know, you can
set opacity and choose a blending mode for brushes as well. Once again,
there’s nothing like experimenting! Trying different options will be a lot of fun,
trust me!
But now, back to our tutorial, here is a screenshot that shows you where the
Brush Tool is and how many settings can be chosen. If you are new to textures,
I recommend you pick a brush from the default ones and adjust only the size,
leaving the blending mode to “Normal” and the opacity to 100%.
View Larger
6. When you are done painting with the brush, you will be finished. In the “Layer”
window, you’ll notice where you painted with your brush. If you have Elements
like me, to see the Before/After you simply deselect “Layer 1” (remove the eye
from it, as you can see below):
If I click the eye on the left of “Layer 1”, it disappears.
What will show then in your program is the original picture (the “Background”).
Remember to select “Layer 1” again (clicking so that the eye comes back)
before you save your picture. The last thing you will want to do is flatten the
picture, so that the two layers will merge into one picture (which you can save
as a .jpeg, .png… as you normally do).
To do so, simply choose Layer Flatten Image from the menu.
Now the picture is ready to be saved… and shared!
View Larger
I hope you enjoyed this tutorial!!! Please feel free to share your results on my
Facebook page, I would love to see your creations!
It would also be much appreciated if you could share this link, so that others can
come and grab a copy of my textures.
THANK YOU!!!
What are the T.O.U. (Terms of Use) of these textures?
Elena T. Photography’s Unconventional Macrocosms textures can be freely used for
both personal and commercial projects.
Links to my page or mentions, though not mandatory in any way, are highly
appreciated.
What you cannot do with these textures is:
Claim them as your own
Edit and redistribute them in any way (if you wish to create a freebie using
them, please contact me first)
Sell them
If you have any doubts about the Terms of Use, please drop me an e-mail!
For any questions regarding the textures usage, kindly write a post on my Facebook
Page, so that the answer can be helpful to other people as well. Thank you!
I have enjoyed playing with your textures. Are there some more?
What textures do you usually play with in your photographs? Do
you recommend some?
First of all, I’m really happy you enjoyed playing with my textures. If there’s interest
in them and I’m inspired, I’ll maybe add some more textures to the Unconventional
Macrocosms set, probably as many as the planets that are currently missing ;)
If you are interested, don’t forget to show your appreciation and write your feedback!
I’m a fan of soft editing, yet I love experimenting with my creativity – so I love both
textures and actions.
My favorite creative tools are Isabelle Lafrance’s and Jessica Drossin’s – both Isabelle
and Jessica offer lovely freebies and very beautiful texture packs on their websites.
I suggest you contact them if you are interested in trying their resources and want to
find the perfect products to suit your photography style and/or client’s needs.