Electronic Battery Isolator Switch - Cobo Oceania Electronic Battery Switch00_01.pdf · ECU/delay,...
4
www.Cobo.com.au [email protected] Bsafe everything you need to comply with AS/NZ standards – Dangerous Goods & Mining The Bsafe Battery Master Switch has been designed to comply with Australian Standards AS 2809.2 and European ADR 2005 Electronic Battery Isolator Switch AU 2809.2
Transcript of Electronic Battery Isolator Switch - Cobo Oceania Electronic Battery Switch00_01.pdf · ECU/delay,...
www.Cobo.com.au
Bsafe everything you need to comply with AS/NZ
standards – Dangerous Goods & Mining
The Bsafe Battery Master
Switch has been designed to
comply with Australian
Standards AS 2809.2 and
European ADR 2005
Electronic Battery Isolator Switch
AU 2809.2
www.Cobo.com.au
Ph 07 3807 4866
10 Obvious Fact; Bsafe is:
REALIABLE Built to resist tough condition
SAFE Features to protect driver and goods, during wiring and operation
POWERFUL Two double-break main contact rated at 300AMPs continues
current each
CERTIFIED Design to standards for mining and transport of dangerous goods AU
2809.2 – ADR 2005
EASY TO FIT Flexible fixation, ready to fit an chassis in different orientation
EASY TO CONNECT M10 studs with flexible access for power cables from
different angle
FUNCTIONAL Auxiliary power output via DIN connector (Field isolation,
ECU/delay, Roll-over device)
EASY TO OPERATE Handle with padlock + local ON button, emote switches &
CAN interface via Din connector
ADVANCE Optional current measurement, battery management circuit breaker,
setting via CAN ( Available in shortly )
COMPETITIVE Designed for optimum performance at the best price
Electronic Battery Isolator Switch
AU 2809.2
Installation data
SIZE: Lenghth 150mm: Widtgh 120mm: Height 160mm
Weight: 1.6 kg
Fixation: M8 Threaded insert, can be adjusted for 118X127X104 or 127X118X104
Mounting: Any orientation as long as BAT and BAT+ are at the same vertical level
POWER STUD: M10, length 21mm, torque >20Nm, terminal width <28mm
Working Voltage: 7-32Volts
Current adsorb in off position 1mA
MAX Current rating on auxiliary outputs
• Switched (ECU delay) power feed 4 AMP
• Permanent power feed 1Amp
• Field isolation 10AMP
Working Temperature: -40C + 70C
www.Cobo.com.au
All Safety features you need in one simple switch
Electronic Battery Isolator Switch
Connection for +/- Switch configuration h
+++
-Loads and
Alternator
Connection for +/+ Switch configuration h
+++
-Loads and
Alternator
Loads and
Alternator
Dual Battery Application AU 2809.2
www.Cobo.com.au
Ph 07 3807 4866
Electronic Battery Isolator Switch
AU 2809.2
Bsafe
Rollover device
E-Stops Alternator
Truck ECU
Not a Simple Switch but a Great Power Management Controller
