Electromagnetic Flowmeter / Energy MeterUCL Flow Transducers + UC Converters

Inline FlowmeterUCL2501 / UC880

Inline FlowmeterUCL1000 / UC880

Insertion FlowmeterUCL3770 / UC880

Flange Type Transducer

UCL2501

Wafer Type Transducer

UCL2501

Insertion Type Transducer

UCL2501

Wall Mount Flow Converter

UC880

Compact Type Flow Converter

UC880

Wall Mount Energy Converter

UC880

UCL2501

UCL1000

Introduction Magnetic flowmeters operate on the principle of Faraday's Law of MagneticInduction. It is an ideal method to measure water flow, as its accuracy would not be affected by change in temperature, pressure or fluid properties. There is no pressure loss at all. This results in big savings for customers' energy bills. The only requirement is a minimum

conductivity of 5 µS/cm.

Construction

Each flowmeter consists of a measuring sensor and an electronic converter. Sensor types can be inline orinsertion according to different accuracy requirements and installation constraint. A wide variety of converters are available to suit different applications. All converters are microprocessor based, fully auto-compensated and interference free. Input signal isproportional to induced e.m.f. fromflow sensor (detector head) Advanced communication interface and protocol makes it easy to transmit data to computer systems. In particular, a new version of energy calculator type converter with Modbus communication has been launched. Ithas completely changed the concept offlow monitoring and thermal energymeasurement.

Area of application

* Chiller control in HVAC systems.* Energy billing according to consumption in high rise buildings.* Sewage and waste water treatment plants.* Food and beverage factories.* Chemical and pharmaceutical industries.

About the company We have been serving all industries inthe field of instrumentation and control. Inparticular, flow and energy measurement are our specialty and expertise. We have built up a team of sale andservice staff. We are ready to receive your enquiries, and would like to shareour experience in different applications.

UCL3770

UC 880

Subject to change without prior notice Ver.: 20180502

Electromagnetic Flowmeter

UCL Flow Transducers

Flow Converters

OR OR

UC 321

Energy Converters

Model

Description

Body material

Nominal diameter

Nominal pressure

Process connection

Flanges material

Liquid temperature

Lining material

Electrodes material

DN6...50 (PN 40 standard)

DN65...2000 (PN 16 standard, others on request)

0...80℃ Hard Rubber or PTFE (lining material)

0...120℃ PTFE (lining material)

Stainless steel AISI 316

others on request

Repeatibility

Accuracy

+/-0.1%

+/-0.4% with UC880-A converters+/-0.3% with UC880-S1 converters (option)+/-0.5% with UC321

UCL2501

"Flanged" sensor, the widest selection of diameters.

Carbon steel painted

Stainless steel AISI 304 or AISI 316 (option)

DN 6...2000

Carbon steel

Stainless steel AISI 304 or AISI 316 (option)

DN6 & 8: PFA (no other option)

DN10 to 32: PTFE (no other option)

DN40 or above: Hard Rubber (option PTFE)

others on request

Flange:DIN

others on request

Protection rating

Turndown ratio 10:1

Compact version - IP67

Remote version (max. 20m) - IP68

Subject to change without prior notice Ver.: 20180502

Transducers

Subject to change without prior notice Ver.: 20180502

Dimensions in mmUCL2501

Compact version

� � PN A B

D1 D2 Weight (kg) Compact Remote

6 40 74 265 165 55 42.5 6

10 196 348 248 90 60 7

15 196 350 250 95 65 8

20 196 355 255 105 75 8

25 196 360 260 115 85 9

32 196 376 276 140 100 11

40 200 345 245 150 110 12

50 200 353 253 165 125 13

65 16 200 373 273 185 145 17

80 200 385 285 200 160 17

100 250 408 308 220 180 22

125 250 433 333 250 210 26

150 300 465 365 285 240 36

200 350 518 418 340 295 43

250 450 630 530 405 355 66

300 500 680 580 460 410 76

350 550 735 635 520 470 94

400 600 790 690 580 525 110

450 600 840 740 640 585 130

500 600 893 793 715 650 153

600 600 998 898 840 770 200

700 700 1105 1005 910 840 258

800 800 1215 1115 1025 950 341

900 900 1315 1215 1125 1050 455

1000 1000 1423 1323 1255 1170 528

1200 1200 1610 1510 1485 1390 686

1400 1400 1770 1670 1685 1590 855

1600 1600 1971 1871 1930 1820 1038

Ť

Remote version

Order code

Subject to change without prior notice Ver.: 20180502

Model UCL1000

Description

Body material

Nominal diameter

Nominal pressure

Process connection

Flanges material

Liquid temperature

Lining material

Electrodes material

"Wafer" sensor, suitable for mounting between mating flanges of various types (UNI, DIN, ANSI, JIS, etc).

Carbon steel painted

Stainless steel AISI 304 or AISI 316 (option)

DN 20...150

DN20...50 (PN 40 standard)

DN65...150 (PN16 standard, other on request)

Wafer type

0...80℃ Hard Rubber or PTFE (lining material)

0...120℃ PTFE (lining material)

No

DN32 or below : PTFE (no other option)

DN40 or above: Hard Rubber (option PTFE)

others on request

Stainless Steel AISI 316

others on request

Compact version - IP67

Remote version (max. 20m) - IP68Protection rating

Repeatibility

Accuracy

+/-0.1%

Turndown ratio 10:1

Subject to change without prior notice Ver.: 20180502

Transducers

+/-0.4% with UC880-A converters+/-0.3% with UC880-S1 converters (option)+/-0.5% with UC321

Subject to change without prior notice Ver.: 20180502

Order code

Dimensions in mmUCL1000

Order code

� � PN A B

Weight (kg) PTFE Hard rubber Compact Remote

20 40 96 100 265 165 5.5

25 96 100 275 175 6

32 96 100 285 190 8

40 96 100 295 200 9.5

50 96 100 310 215 10.5

65 16 146 150 330 235 13

80 146 150 345 250 14

100 146 150 365 270 19

125 176 180 390 285 23

150 176 180 415 285 33

Ť

Compact version

Remote version

Model UCL3770

Insertion sensor, for fixed installationDescription

Probe material

Size for pipe line

Nominal pressure

Process connection

Connection material

Liquid temperature

Lining material

Electrodes material

Stainless steel AISI 304 (standard)

Stainless steel AISI 316 (option)

Size 1 - below 500mm

Size 2 - below 1000mm

Size 3 - below 2000mm

others on request

PN 16 (others on request)

1" threaded end

others on request

Stainless steel AISI 304

0...80℃ (compact)

0...120℃ (Remote)

PTFE

Stainless steel AISI 316others on request

Protection rating

Repeatability

Compact version - IP67

Remote version - IP68

+/-0.5%

Accuracy+/-1.5% for velocity >1m/s (under proper installation condition) +/-1%(option)

Subject to change without prior notice Ver.: 20180502

Transducers

Subject to change without prior notice Ver.: 20180502

Dimensions in mmUCL3770/UC880

SI ZE DN RANGE

SI ZE1 FROM DN 80 UP TO DN 500

SI ZE2 FROM DN 80 UP TO DN 1000

SI ZE3 FROM DN 80 UP TO DN 2000

Order code

Model UC 880

Description Flow converter

Power Supply 90...250Vac 45...60Hz / 18...36Vdc (option)

Humidity range

Protection rating IP 67

Current output 4...20mA - RL 1000Ω

Full scale value 0.4...10m/s

Accuracy +/- 0.4% m.v. (velocity > 0.4m/s)+/- 0.3% m.v. (velocity > 0.4m/s) - option

CE certification Yes

Pulse / frequency output 0...500Hz pulse, 0...5000Hz frequency

Display capacity 9,999,999,999

Repeatibility Better than 0.1%

Programming Key buttons

RS 485 modbus (option)

Display LCD display

Serial interface

0...100%RH at 65℃

Ambient temperature

Data storage

Programmable- Low flow cut off- Damping- Empty pipe detect

0...50℃

EEPROM stored measuring values on power failure

Enclosure material Aluminum

Turndown ratio 10:1

Subject to change without prior notice Ver.: 20180502

Approvals

This product conforms with the requirements of the following standards harmonizedwith the EMC Directive 2004/108/EC-EN 61326-1: 2006-EN 61000-6-2: 2005-EN 61000-6-4: 2007 + A1: 2011

Flow Converters

- Peak reading- Bi-directional output

Remote Version Compact Version

Order code

Subject to change without prior notice Ver.: 20180502

Model UC 321

* Display simultaneously 4 variables: Q - Flow rate E - Thermal Energy T1 - Temp. hotside T2 - Temp. coldside - Pt100 or Pt1000 paired with 3-wire and 4-wire connection

- Programmable values for specific heat and density of different liquids

- Bi-directional measure of flow

- Display units: (m3, Ltr), (KWh, MWh), (KW, MW, KVA), (℃)

- Additional functions: Low-flow cutoff

- System accuracy: +/- 1.0%

- Min. temperature difference: 0.1℃

- Output: pulse (energy), 4-20mA (flow, power), HART protocol RS485 modbus

- Data storage: EEPROM stored measuring values on power failure

- Display capacity:99,999,999

- Protection rating:IP65

- Power supply:90...250Vac,45...60Hz

- Ambient temperature: 0...50℃

Application

- Heating systems- Cooling systems- Solar-power systems- For communication with building-management systems

Description

Subject to change without prior notice Ver.: 20180502

Heating / cooling energy calculator

ApprovalsThis product conforms with the requirements of the following standards harmonized with the EMC Directive 2004/108/EC

- EN 61000-6-2: 2005- EN 61000-6-4: 2007 + A1: 2011- EN 61000-3-2: 2006 + A1: 2009 + A2: 2009- EN 61000-3-3: 2008- EN 1434-2007 - Heat meters- EN 55081-1 electromagnetic compatibility- EN 55082-2 electromagnetic compatibility

EnergyConverter

Dimensions in mmUC 321

Order code

Subject to change without prior notice Ver.: 20180502

United Controls (Hong Kong) Ltd.

Flat A1, G/F., Tonic Industrial Centre,

26 Kai Cheung Road, Kowloon Bay, Hong Kong

Tel : (852) 2556 1001

Fax: (852) 2556 1298

Email: info@unitedcontrols.com.hk

Website:www.unitedcontrols.com.hk

United Controls(Hong Kong) Ltd.

統一儀器(香港)有限公司