Electro-pneumatic Lowering System - stemmann.de · The Retrofit Lowering System for Urban Transport...
Transcript of Electro-pneumatic Lowering System - stemmann.de · The Retrofit Lowering System for Urban Transport...
STEMMANN PRODUCTSQUALITY MADE IN GERMANY
Electro-pneumaticLowering Systemfor Pantographs in Urban Traffic
The Retrofit Lowering System for Urban Transport
STEMMANN-TECHNIKElectro-pneumatic Lowering System
Our electro-pneumatic lowering system is a powerful component for roof-mounted panto-graphs in urban railtraffic. The self-sufficient system is completely integrable into the present vehicle performance and suitable to existing pantographs. Alternatively our lowe-ring system can be installed in roof-mounted position near the pantograph. The connection is made to the already given vehicle electrics.
The automatic lowering of the pantograph in case of a collector strip breakage prevents unnecessary damage to the overhaed wire and the pantograph.
Retrofit systemfor pantographs
in urban traffic
Suitable to the pantographor alternatively installation
in roof-mounted position
Stand-alone system fits togiven vehicle electrics
Effective minimizationof damages to theoverhead wire and
the pantograph
A channel in the collector strip is supplied via the line system with compressed air from the compressed air system's memory. Where com-pressed air escapes from the collector strip in case of damage, the system detects this pres-sure drop and the pantograph is electrically lowered by the spindle drive within a few seconds. Not operating hazardous hairline cracks in the collector strip and minimal leaka-ge are suppressed by the tolerance of the sensitivity of the pressure switch. An unfounded lowering of the pantograph is thus prevented.
Reliable operation
SYSTEM ADVANTAGES
Design Stand-alone lowering system for pantographs in urban traffic
Type Electro-pneumatic lowering system
Connection Electrical connection to given vehicle electrics
Operating principle Sensor system by air pressure unit
Electrically actuated lowering by spindle drive
Operating speed Suitable for all speeds
SYSTEM COMPONENTS
Air tank
Connection to the pressure air channel
Safety component
Compressor unit
Electrical connection to the vehicle
Pressure sensor
Constant pressure regulation of the air tank
Electrical connection to the spindle drive
Our innovativeconcept allows retrofittingexisting vehicles with the
electro-pneumatic loweringsystem for pantographs
in urban traffic
1
2
3
4
5
6
7
85
8
4
3
2
1
7
6
ELECTRO-PNEUMATICLOWERING SYSTEMQUALITY MADE IN GERMANY
QUALITY MADE IN GERMANY
CABLE FESTOON SYSTEMSLEITUNGSWAGEN-SYSTEME
CABLE REELSLEITUNGSTROMMELN
SLIP RING ASSEMBLIESSCHLEIFRINGÜBERTRAGER
CONDUCTOR LINESSCHLEIFLEITUNGEN
ROOF-MOUNTED PANTOGRAPHSDACHSTROMABNEHMER
3rd RAIL CURRENT COLLECTORDRITTE-SCHIENE-STROMABNEHMER
frost® GROUND CONTACTSfrost® ERDUNGSKONTAKTE
STINGER SYSTEMSSTINGER-SYSTEME
INDUSTRIAL PRODUCTS · INDUSTRIEPRODUKTE
RAILWAY PRODUCTS · BAHNPRODUKTE
PO-Box · :Postfach 1 4 6 0
2
Phone : Fax :
++
5 9 2 35 9 2 3
81 81
- -
0100
4 94 9
Niedersachsenstr. 4 8 4 6 5 Schüttorf · Germany
STEMMANN-TECHNIK GmbH
STG
· E
lect
ro-p
neum
atic
Low
erin
g S
yste
m ·
EN
G ·
8903
01 ·
08/2
015