Technical Data FZ FF FZ FF WARNING Electrical Shock Hazard ...
Electrical Shock.
-
Upload
noman-khan -
Category
Documents
-
view
196 -
download
3
Transcript of Electrical Shock.
![Page 1: Electrical Shock.](https://reader031.fdocuments.us/reader031/viewer/2022022201/5887f3731a28ab7d5c8b6647/html5/thumbnails/1.jpg)
E l e c t r i c a l S h o c k
Presented by
Md. Noman Saber Khan
![Page 2: Electrical Shock.](https://reader031.fdocuments.us/reader031/viewer/2022022201/5887f3731a28ab7d5c8b6647/html5/thumbnails/2.jpg)
shock“High voltage is dangerous”“Voltage isn’t dangerous, current is”?
![Page 3: Electrical Shock.](https://reader031.fdocuments.us/reader031/viewer/2022022201/5887f3731a28ab7d5c8b6647/html5/thumbnails/3.jpg)
shockDepends on Current Pathway through body Nature of electrical source Duration (and voltage)
![Page 4: Electrical Shock.](https://reader031.fdocuments.us/reader031/viewer/2022022201/5887f3731a28ab7d5c8b6647/html5/thumbnails/4.jpg)
currentCurrent Level (AC 60 Hz)
Effect
1 mA Sensation that shock is occurring
5 mA Upper limit of safe or harmless range
10–20 mA Let-go threshold: flexor muscles are stronger than the extensor muscles;subject cannot shake loose from the shock source; perspiration
30–40 mA Tetany: sustained muscle contraction and cramping
50–70 mA Extreme pain, physical exhaustion, fainting, irreversible nerve damage;possibility of ventricular fibrillation (heart); respiratory arrest withpossible asphyxiation
100 mA Ventricular fibrillation (heart) and death if the current passes through the body trunk
>100 mA Fibrillation, amnesia, burns, severe electrolysis at contact sites
>5 A Little likelihood of survival
![Page 5: Electrical Shock.](https://reader031.fdocuments.us/reader031/viewer/2022022201/5887f3731a28ab7d5c8b6647/html5/thumbnails/5.jpg)
Ac/dc
http://www.allaboutcircuits.com/vol_1/chpt_3/4.html
Bodily effect DC AC 60 Hz AC 10 kHz
Slight sensation felt at hand(s)
Men = 1.0 mAWomen = 0.6 mA
0.4 mA0.3 mA
7 mA5 mA
Threshold of perception Men = 5.2 mAWomen = 3.5 mA
1.1 mA0.7 mA
12 mA 8 mA
Painful, but voluntary muscle control maintained
Men = 62 mAWomen = 41 mA
9 mA6 mA
55 mA37 mA
Painful, unable to let go of wires
Men = 76 mAWomen = 51 mA
16 mA10.5 mA
75 mA50 mA
Severe pain, difficulty breathing
Men = 90 mAWomen = 60 mA
23 mA15 mA
94 mA63 mA
Possible heart fibrillation after 3 seconds
Men = 500 mAWomen = 500 mA
100 mA100 mA
![Page 6: Electrical Shock.](https://reader031.fdocuments.us/reader031/viewer/2022022201/5887f3731a28ab7d5c8b6647/html5/thumbnails/6.jpg)
shock• “Let go” current – above this you
can’t let go (muscles contract)
• Interestingly, domestic AC happens to the most dangerous
• Also body impedance is lower
• Resistance! Your skin resistance is > 100kOhm dry, but < 1 kOhm wet!
C. F. Dalziel, Electric Shock Hazard. IEEE Spectrum (1972)
![Page 7: Electrical Shock.](https://reader031.fdocuments.us/reader031/viewer/2022022201/5887f3731a28ab7d5c8b6647/html5/thumbnails/7.jpg)
S o w h a t t o d o ?Working with 24 VDC, our biggest risk is short-circuit -> overheating -> burns or fire.• Watch out for leads• Turn things off before working on
them• Don’t wear jewelry / watches when
working with power systems
![Page 8: Electrical Shock.](https://reader031.fdocuments.us/reader031/viewer/2022022201/5887f3731a28ab7d5c8b6647/html5/thumbnails/8.jpg)
S o w h a t t o d o ? Use multimeter
correctly Watch out for correct
socket Only measure
resistance in de-energized circuit
Careful not to short out connections with the leads
http://www.allaboutcircuits.com/vol_1/chpt_3/9.html
![Page 9: Electrical Shock.](https://reader031.fdocuments.us/reader031/viewer/2022022201/5887f3731a28ab7d5c8b6647/html5/thumbnails/9.jpg)
W e a r t h e s e When soldering Working with
moving parts Using tools
![Page 10: Electrical Shock.](https://reader031.fdocuments.us/reader031/viewer/2022022201/5887f3731a28ab7d5c8b6647/html5/thumbnails/10.jpg)
O t h e r t i p s Working with the robot or robotic arm
know• Where it could move• How you will turn it off
Be aware of what’s on (and don’t forget) Don’t touch a hot iron Don’t try to catch a falling iron Keep workspace tidy Report incidents
![Page 11: Electrical Shock.](https://reader031.fdocuments.us/reader031/viewer/2022022201/5887f3731a28ab7d5c8b6647/html5/thumbnails/11.jpg)
NFPA 70E Standard for Electrical Safety Requirements for Employee WorkplacesTable 2-1.3.4 Approach Boundaries to Live Parts for Shock Protection.
(All dimensions are distance from live part to employee.) (1) (2) (3) (4) (5)
Limited Approach Boundary1
Restricted Approach Boundary1
Nominal System Voltage Range,
Phase to Phase
Exposed Movable
Conductor
Exposed Fixed Circuit Part
Includes Inadvertent
Movement Adder
Prohibited Approach
Boundary1 0 to 50 Not specified Not specified Not specified Not specified
51 to 300 10 ft 0 in. 3 ft 6 in. Avoid contact Avoid contact
301 to 750 10 ft 0 in. 3 ft 6 in. 1 ft 0 in. 0 ft 1 in.
751 to 15 kV 10 ft 0 in. 5 ft 0 in. 2 ft 2 in 0 ft 7 in.
15.1 kV to 36 kV 10 ft 0 in. 6 ft 0 in. 2 ft 7 in. 0 ft 10 in
36.1 kV to 46 kV 10 ft 0 in. 8 ft 0 in. 2 ft 9 in. 1 ft 5 in.
46.1 kV to 72.5 kV
10 ft 0 in. 8 ft 0 in. 3 ft 3 in. 2 ft 1 in.
72.6 kV to 121 kV 10 ft 0 in. 8 ft 0 in. 3 ft 2 in. 2 ft 8 in.
138 kV to 145 kV 11 ft 0 in. 10 ft 0 in. 3 ft 7 in. 3 ft 1 in.
161 kV to 169 kV 11 ft 0 in. 11 ft 8 in 4 ft 0 in. 3 ft 6 in.
![Page 12: Electrical Shock.](https://reader031.fdocuments.us/reader031/viewer/2022022201/5887f3731a28ab7d5c8b6647/html5/thumbnails/12.jpg)
EFCOG Electrical Safety Task Group
Working on or NearExposed Energized Parts
The Flash Protection Boundary is 4 ft. for systems 600 volts and below unless calculated otherwise under engineering supervision.
![Page 13: Electrical Shock.](https://reader031.fdocuments.us/reader031/viewer/2022022201/5887f3731a28ab7d5c8b6647/html5/thumbnails/13.jpg)
EFCOG Electrical Safety Task Group
![Page 14: Electrical Shock.](https://reader031.fdocuments.us/reader031/viewer/2022022201/5887f3731a28ab7d5c8b6647/html5/thumbnails/14.jpg)
Temperature And Heat Data• Curable burn temperature (1/10sec)
145 °F
• Cell death temperature (1/10 sec)
205 °F
• Temperature at arc terminals
35,000 °F
• Temperature of suns surface
9,000 °F
• Temperature of burning clothing 1,400
°F
• Clothing ignition temperature 700 to
1,400 °F
• Temperature of metal droplets 1,800
°F
![Page 15: Electrical Shock.](https://reader031.fdocuments.us/reader031/viewer/2022022201/5887f3731a28ab7d5c8b6647/html5/thumbnails/15.jpg)
Working on or NearExposed Energized Parts
Unqualified Persons, Safe Approach Distance:
Unqualified persons must not cross the Flash Protection Boundary unless they are wearing the appropriate PPE and under the supervision of a qualified person.
![Page 16: Electrical Shock.](https://reader031.fdocuments.us/reader031/viewer/2022022201/5887f3731a28ab7d5c8b6647/html5/thumbnails/16.jpg)
Electrical Burns vs Occupational burns OSHA - 1996
Type of Burn % of Total % of
Permanently Disabled
Scald 38 6.5 Flame 30 10.0
Tar 16 14.3 Electrical 8 86.7 Contact 4 25.0
Chemical 4 50.0
![Page 17: Electrical Shock.](https://reader031.fdocuments.us/reader031/viewer/2022022201/5887f3731a28ab7d5c8b6647/html5/thumbnails/17.jpg)
![Page 18: Electrical Shock.](https://reader031.fdocuments.us/reader031/viewer/2022022201/5887f3731a28ab7d5c8b6647/html5/thumbnails/18.jpg)
Consequences of an Arc-Flash Incident
![Page 19: Electrical Shock.](https://reader031.fdocuments.us/reader031/viewer/2022022201/5887f3731a28ab7d5c8b6647/html5/thumbnails/19.jpg)
Consequences of an Arc-Flash Incident
Review the list of items shown in slide.In this case the worker wasn’t shocked he was caught in an Arc Flash.
![Page 20: Electrical Shock.](https://reader031.fdocuments.us/reader031/viewer/2022022201/5887f3731a28ab7d5c8b6647/html5/thumbnails/20.jpg)
Electricity is a part of our daily lives, harness its power but recognize the hazards.