ELECTRICAL SAFETY TRAINING PROGRAMS FOR...
Transcript of ELECTRICAL SAFETY TRAINING PROGRAMS FOR...
Electricity is an integral part of the modern world, and sometimes it is easy to forget just how dangerous it can be.
The NCRB report since 2012 to 2015 reveals that Fire accidents due to just Electrical Short Circuits itself accounts for
6%-13% of the total Fire accidents. In most states in India the property lost due to fire & electrical accidents are worth
anywhere from 25 - 50 crores each year. Electrical installations often fail or malfunction because of inappropriate
practices and a poor knowledge of safety and risk mitigation measures, and therefore fire and electrical hazards
continues to be one of the foremost causes for massive loses and fatalities every year. With electricity becoming an
indispensable part of our life managing it is inevitable.
TH8 DEC 2017 – CHANDIGARH CORE CONCEPTS IN ELECTRICAL SAFETY AND STATUTORY REQUIREMENTS
TH8 FEB 2018 – CHENNAICORE CONCEPTS IN ELECTRICAL SAFETY AND STATUTORY REQUIREMENTS
th9 FEB 2018 – CHENNAIHAZARDOUS AREA CLASSIFICATION AND ARC FLASH STUDY
TH16 FEB 2018—GURGAON
ARC FLASH STUDY, LIGHTNING PROTECTION & EARTHING
ELECTRICAL SAFET Y TRAINING PROGRAMS FOR INDUSTRIAL AND COMMERCIAL ESTABLISHMENTS
About the Faculty:
HSE professional with 20 years of domain experience in risk engineering and safety consulting. Certified by the IEC in selection of Ex-equipment for use in Explosive & Hazardous Atmospheres(IEC Ex System) as per IEC 60079 standards.
Who should attend: HSE and Safety Professionals, Electrical/Maintenance/Operations Engineers, Risk Assessors / Insurance Surveyors.
Delegate Fee :
INR 7500/- per delegate ; GST additional.10% discount for
multiple registrations from the same organization. Early bid th
discount of 10% additionally for registrations before 30
Oct'17 for all programs. Fee must be paid before the start
of the program.
%
- CEA (Measures relating to safety and
electric supply) regulations 2010
- CEA (Measures relating to safety and
electric supply ) amendment regulations 2015
- NFPA 70E – Standards for electrical safety in the
workplace
- LOTO control of hazardous energy, and
implementation stages
- Arc Flash Study – Overview
CORE CONCEPTS IN ELECTRICAL
SAFETY AND STATUTORY
REQUIREMENTS
Professionals who work around electricity
need up-to-date & accurate information
to be effective
OBJECTIVES
Decoding statutory requirements & regulations
in India leading to
- Insights for Risk mitigation using HAC concepts
- Selection for electrical equipment based upon the
nature of operations , gas groups & temperature
- Techniques behind a HAC survey
- Type of hazardous area equipment
- Maintaining an Ex register , Ex equipment inspection
- Flame proof enclosure
- Certification bodies
- Guidelines and case studies
HAZARDOUS AREA CLASSIFICATION
In short – all industries which handle flammable
materials need Hazardous Area Classification and
proper selection of electrical equipment. A plant
which handles flammable materials is divided into
Zones based upon the frequency of the appearance
and the duration of an explosive gas atmosphere. To
help select the right electrical equipment the
knowledge of the zone is essential. This knowledge is
essential to prevent explosions and fires which could
lead to catastrophic losses.
OBJECTIVES
At the end of the course the learner will be able to
understand the classification into HAC Zones ,
understand the different types of electrical equipment,
apply the principles for electrical equipment selection
in hazardous areas and solve the conflicts related to
installed equipment and the requirement in existing
facilities.
For Enquiries and Registrations:Ms. Jolly Rynjah , E: [email protected] M:+91 9840068525Ms. Nirmala V , E: [email protected] M: +91 9381005952Chola MS Risk Services Ltd, 3rd Floor Parry House, No.2 NSC Bose Road, Chennai 600 001W: www.cholarisk.com | http://training.cholarisk.com
ARC FLASH STUDY
Arc flash is one of the common dangers while working
with electricity. Around three decades ago, Ralph Lee
published his paper on a serious threat called Arc Blast
Hazards.An arc flash is the light and heat produced
from an electric arc, supplied with sufficient electrical
energy, to cause substantial damage,harm, fire, or injury.
OBJECTIVES
The objective of the course is to orient the learner about
the hazards associated with an arc flash. The course will
direct the learner on the techniques that can be
adopted to mitigate or elimate these hazards. How to
conduct an arc flash study, what are the possible
outcomes and how to analyse the results and take
safety measures will be the focus of the program.
- Why ARC flash study should be done?
- Regulations for ARC flash
- What is ARC flash Boundaries?
- Factors which determines Arc flash boundaries?
- Arc Flash Hazard Analysis – Methodology IEEE 1584
- Steps involved in conducting ARC flash Study?
- Software tools available
- Hazard Risk category levels
- PPE for ARC flash protection
- Recent developments in Arc flash protection
- Concept of Lightning Protection
- Standards & Guidelines on Lightning protection
- Structural protection: Basic concepts, Methods
of LPS, Designing of LPS for
different structures
- Lightning protection for Hazardous Areas,
- Lightning protection for Tank farm areas.
- Lightning protection for commercial and high
rise establishments
- Introduction to surge protection systems
LIGHTNING PROTECTION AND EARTHING
Lightning strikes on a plant or building can be extremely
disastrous., It is extremely harmful to both life and property
and therefore its impact should be limited. Fortunately there
are techniques and methods to safe guard against threats
from Lightning.
OBJECTIVES
The objective of the course is to orient the learner about
the hazards associated with a lightning strike on different
kind of establishments and operations. The course will
direct the learner on the techniques that can be adopted
to mitigate or elimate these hazards. The learner will also
understand the design behind a lightning protection
system.