Electric Vehicle Charging Solutions...Catalog Number Output Voltage System Output Current Mounting...
Transcript of Electric Vehicle Charging Solutions...Catalog Number Output Voltage System Output Current Mounting...
Catalog2800CT1001R02/13
2013Class 2800
Electric Vehicle Charging SolutionsPowering the Future of Sustainable Mobility
CONTENTS
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 2
Indoor Charging Stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 3
Outdoor Charging Stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 5
Wall-Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 5Outdoor, Non-Networked, Pedestal-Mount . . . . . . . . . . . . . . . . . . Page 6Outdoor, Networked, Pedestal-Mount . . . . . . . . . . . . . . . . . . . . . . Page 8
RFID Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 10
Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 11
Electric Vehicle Charging SolutionsDescription
© 2011–2013 Schneider ElectricAll Rights Reserved
2
Schneider Electric has developed a line of Electric Vehicle (EV) charging solutions for your unique needs. Schneider Electric will work with you to deliver the best charging infrastructure solution that includes product, installation, maintenance, and an infrastructure management system.
Our EV charging products are compatible with safety standards and industry specific standards, such as the Society of Automotive Engineers standards (SAE J1772).
Description Smart Charging, Smart Savings, Smart Grid
Residential Charging SolutionsOur residential charging stations provide simple, easy-to-install, and user-friendly solutions for charging electric vehicles at home. Installations are provided by a network of licensed installers.
Commercial and Fleet Charging SolutionsFleet and commercial customers can count on charging solutions that offer convenient public and private access.
Electric Vehicle Charging SolutionsIndoor Charging Stations
3© 2011–2013 Schneider ElectricAll Rights Reserved
Indoor Charging Stations
Features
Catalog Numbers
Indoor Charging Stations
Residential Applications
• Segmented charge and delay charge progress indicator • Stop Button and Indicator• Power status and system detected fault indicator• Delay button and indicator
Cable Holder:
• Supports and helps organize the cable• Independently mounted from enclosure
Connector and Cord:
• Complies with SAE J1772• Cable length: 18 ft. (5.5 meter)
Enclosure:
• Non-metallic• Indoor wall-mount (stud, drywall, or masonry wall)
Protection:
• Integral Ground Fault Protection: — EV230WS 20 mA
• Ground fault function tested before each charge cycle begins• Auto restart after ground fault or main power loss
Interface:
EV230WS
EV230WS(shown with skin)
Table 1: Indoor Charging Station—Wall-Mount
Catalog Number
Output Voltage System
Output Current
Mounting Type
Charging Units
Application Features
EV230WS 208–240 Vac 30 A Wall Single Indoor Delay Start
Electric Vehicle Charging SolutionsIndoor Charging Stations
© 2011–2013 Schneider ElectricAll Rights Reserved
4
Technical Specifications
N L1 L2
OvercurrentProtection
Device
EV230WS208/240 Vac
EquipmentGround
SolidNeutral
208–240 V
120 V
120 V
Ground
ElectricVehicle
ChargingStation
Figure 1: Indoor Charging Station Wiring Diagrams
Table 2: Indoor Charging Stations
Power Specifications
Input Power EV230WS208–240 Vac, single-phase, 60 Hz, 30 A maximum
Input Power Connection Line 1, Line 2, and Ground
Feeder Circuit Breaker 2-pole, 40 A, non-GFCI type
Output Power EV230WS 208–240 Vac, 30 A, 7.2 kW max.
Physical SpecificationsEnclosure Type Type 1 (Indoor only)
Enclosure Dimensions See dimensions on page 11
Enclosure Mounting Wall-mount
Cable Type SAE J1772
Cable Length 18 ft. (5.5 m)
Cable Management Non-retractable, separate from the enclosure
Shipping Weight 17.0 lbs. (7.71 kg)
User InterfacePower Available Status indicator
Charging Eight-segment progress indicator
Ground Fault Red status indicator
System Detected Fault Push button and red stop indicator
Delay StartPush button to delay up to eight hours, in one-hour increments
ProtectionGround Fault Protection EV230WS Integral, CCID 20 mA, auto reset
Ground Fault Protection System Test Automatic at the beginning of each charge cycle
EnvironmentalOperating Temperature -22°F to 131°F (-30°C to 55°C)
Electro-static Discharge 15 kV open air, 8 kV contact
Surge 6 kV
Radiated Immunity 20 V/m
Conducted Immunity 20 V
Electrical Fast Transient/Burst (EFTB) 2 kV
Emissions FCC Class B
Standards ComplianceNEC Article 625
SAE J1772
UL 2594
Electric Vehicle Charging SolutionsOutdoor Charging Stations
5© 2011–2013 Schneider ElectricAll Rights Reserved
Outdoor Charging Stations
Wall-Mount
Features
Catalog Numbers
Interface:
• Power status• Charge indicator• System detected fault indicator
Cable Holder:
• Connector dock• Supports and helps organize the cable• Independently mounted from enclosure
Connector and Cord:
• Complies with SAE J1772• Cable length: 18 ft. (5.5 meter)
Enclosure:
• Metallic enclosure• Indoor/outdoor wall-mount
Outdoor Wall-Mount Charging Station
Residential and Commercial Applications
Authentication:
• Localized RFID solution (optional)
Protection:
• Integral Ground Fault Protection at 20 mA• Ground fault function tested before each charge
cycle begins• Auto restart after ground fault or main power loss
Table 3: Outdoor Charging Stations—Wall-Mount
Catalog Number
Output Voltage System
Output Current
Mounting Type
Charging Units
Application Features
EV230WSR 208–240 Vac 30 A Wall Single Indoor/Outdoor —
EV230WSRR 208–240 Vac 30 A Wall Single Indoor/Outdoor RFID (non-networked)
Electric Vehicle Charging SolutionsOutdoor Charging Stations
© 2011–2013 Schneider ElectricAll Rights Reserved
6
Outdoor, Non-Networked, Pedestal-Mount
Features
Catalog Numbers
Table 4: Outdoor Charging Stations—Pedestal-Mount
Catalog Number Output Voltage System Output Current Mounting Type Charging Units Application Authentication
EV230PSR
208–240 Vac 30 A Pedestal
Single
Outdoor
—
EV230PDR Dual —
EV230PSRR Single RFID (non-networked)
EV230PDRR Dual RFID (non-networked)
Interface:
• Power status• Charge indicator• System detected fault indicator
Holders for Connector and Cable:
• Support and help organize cables• Connector storage dock• Integral with the enclosure
Connector and Cable:
• Complies with SAE J1772• Cable length: 18 ft. (5.5 meter)
Protection:
• Integral Ground Fault Protection at 20 mA• Ground fault function tested before each charge
cycle begins• Auto restart after ground fault or main power loss
Authentication:
Localized RFID solution (optional)
NOTE: Dual charging unit shown— see Table 4 for single charging unit options
Enclosure and Mounting:
• Metallic enclosure• Metallic mounting pedestal
Commercial Applications
Electric Vehicle Charging SolutionsOutdoor Charging Stations
7© 2011–2013 Schneider ElectricAll Rights Reserved
Technical Specifications
Outdoor Non-NetworkedPedestal-Mount Units
Outdoor Non-Networked Wall-Mount
Single Non-Networked Unit
Dual Non-Networked
Table 5: Outdoor Non-Networked Wall-Mount and Pedestal-Mount Charging Stations
Power Specifications (Each charging unit)
Input Power 208–240 Vac, 30 A, single phase, 60 Hz
Input Power Connection Line 1, Line 2, and Ground
Feeder Circuit Breaker 2-pole, 40 A, non-GFCI type
Output Power 208–240 Vac, 30 A
Physical Specifications
Enclosure Type Type 3R
Enclosure Dimensions See dimensions on pages 11 and 12
Enclosure Mounting Wall or Pedestal
Cable Type SAE J1772
Cable Length 18 ft. (5.5 m)
Cable Management Non-retractable, integral with the enclosure
Unit Options / Shipping Weights
Single unit (Wall-mount) 38 lbs. (17 kg)
Single unit (Pedestal-mount) 92 lbs. (42 kg)
Dual unit (Pedestal-mount) 106 lbs. (48 kg)
User Interface
Power Available Status indicator
Charging Blinking blue indicator
System Detected Fault Red status indicator
Authentication
Type Non-networked RFID authentication card
Programming Radio frequency remote control
Protection
Ground Fault Protection Integral, CCID 20 mA, auto reset
Ground Fault Protection System Test Automatic test at the beginning of each charge cycle
Environmental
Operating Temperature -22°F to 131°F (-30°C to 55°C)
Electro-static Discharge 15 kV open air, 8 kV contact
Surge 6 kV
Radiated Immunity 20 V/m
Conducted Immunity 20 V
Electrical Fast Transient/Burst (EFTB) 2 kV
Emissions FCC Class B
Standards Compliance
NEC Article 625
SAE J1772
UL 2594
Electric Vehicle Charging SolutionsOutdoor Charging Stations
© 2011–2013 Schneider ElectricAll Rights Reserved
8
Outdoor, Networked, Pedestal-Mount
Features
Catalog Numbers
Table 6: Outdoor Networked Charging Stations—Pedestal-Mount
Catalog Number Unit TypeOutput Voltage
SystemOutput Current
Mounting Type
Charging Units
Application Network
EV230PSRACG Gateway
208–240 Vac 30 A Pedestal
Single
Outdoor
Server: cellularLocal: 802.15.4
EV230PSRACNG Non-Gateway Local: 802.15.4
EV230PDRACG GatewayDual
Server: cellularLocal: 802.15.4
EV230PDRACNG Non-Gateway Local: 802.15.4
EV230PSRACGC1
1 These products are designed specifically for use in Canada.
GatewaySingle Server: cellular
Local: 802.15.4EV230PDRACGC1 Dual
Interface:
• Backlit color LCD screen displays charging instructions, charging status, and usage fees
• Red indicator lights on front panel for system detected faults
Holders for Connector and Cable:
• Support and help organize cables• Connector storage dock• Integral with the enclosure
Connector and Cable:
• Complies with SAE J1772• Cable length: 18 ft. (5.5 meter)
Enclosure and Mounting:
• Metallic enclosure• Metallic mounting pedestal
Protection:
• Integral Ground Fault Protection at 20 mA• Ground fault function tested before each charge
cycle begins• Auto restart after ground fault or main power loss
Authentication:
• ChargePoint™ card or Contactless credit card• Track customer usage history• Optional payment by time/energy usage
Network Connectivity (non-gateway units, single antenna):
• IEEE 802.15.4 wireless communication with gateway unit
• 150 ft (45 m) near line of sight communication range
Network Connectivity (gateway unit, two antennae):
• Wireless communication to server via cellular network• IEEE 802.15.4 wireless communication with non-gateway units• Station location and occupancy status via network• Remote monitoring of status and power usage• Enables remote maintenance services
NOTE: At least one gateway unit is required for each cluster of networked charging stations. A gateway unit establishes a cellular connection for each non-gateway (networked) unit on a cluster. A gateway unit is required for a single-unit installation.
NOTE: Dual gateway charging unit shown— see Table 6 for single charging unit and non-gateway options.
Commercial Applications
Electric Vehicle Charging SolutionsOutdoor Charging Stations
9© 2011–2013 Schneider ElectricAll Rights Reserved
Technical Specifications
Single Networked
Gateway Unit
Dual Networked
Gateway Unit
Outdoor Networked GatewayPedestal-Mount Units
Outdoor Networked Non-GatewayPedestal-Mount Units
Single Networked
Non-Gateway Unit
Dual Networked
Non-Gateway Unit
Table 7: Outdoor Networked Pedestal-Mount Charging Stations
Power Specifications (Each charging unit)
Input Power 208–240 Vac, 30 A, single phase, 60 Hz
Input Power Connection Line 1, Line 2, and Ground
Feeder Circuit Breaker 2-pole, 40 A, non-GFCI type
Output Power 208–240 Vac, 30 A
Physical Specifications
Enclosure Type Type 3R
Enclosure Dimensions See dimensions on page 12
Enclosure Mounting Pedestal
Cable Type SAE J1772
Cable Length 18 ft. (5.5 m)
Cable Management Non-retractable, integral with the enclosure
Unit Options / Shipping Weights
Single networked unit (gateway)Single networked unit (non-gateway)
101 lbs.(45.8 kg)
Dual networked unit (gateway)Dual networked unit (non-gateway)
115 lbs. (52 kg)
User Interface
Charging Instructions and Status Backlit LCD color display
Error Messages Backlit LCD color display
System Detected Fault Red indicator light(s) on front panel
Authentication
Option 1 ChargePoint® card
Option 2 Contactless Credit card
Programming ChargePoint cellular network system
Protection
Ground Fault Protection Integral, CCID 20 mA, auto reset
Ground Fault Protection System Test Automatic test at the beginning of each charge cycle
Environmental
Operating Temperature -22°F to 104°F (-30°C to 40°C)
Electro-static Discharge 15 kV open air, 8 kV contact
Surge 6 kV
Radiated Immunity 20 V/m
Conducted Immunity 20 V
Electrical Fast Transient/Burst (EFTB) 2 kV
Emissions FCC Class B
Standards Compliance
NEC Article 625
SAE J1772
UL 2594
Electric Vehicle Charging SolutionsRadio Frequency Identification (RFID) Accessories
© 2011–2013 Schneider ElectricAll Rights Reserved
10
Radio Frequency Identification (RFID) Accessories
The RFID solution for Level 2 Schneider Electric EV charging stations consists of the following accessories:
• Handheld Programmer (EVRFIDHP)
• RFID Authentication Cards (EVRFIDKF)
Handheld Programmer
EVRFIDHP
Features• Used to add and remove users
• One needed for total charging station system
• Connects via radio frequency
• Feedback via audio tone and LED indicator on Proximity Reader
• 4-digit PIN access
Technical Specifications
Frequency 125 kHz / 62.5 kHz
Dimensions See dimensions on page 13
Weight 7 oz. (200 g)
Operating Temperature -22°F to 131°F (-30°C to 55°C)
Color Black
Material ABS
Description Catalog Number
RFID Handheld Programmer EVRFIDHP
RFID Authentication Cards
EVRFIDKF-10
Features (Level 2 chargers only)• Wallet friendly
• Robust and durable design
• Industry standard format
• Unique ID codes
Technical Specifications
Frequency 125 kHz / 62.5 kHz
Weight 0.31 oz. (8.8 g)
Operating Temperature -40°F to 158°F (-40°C to +70°C)
Humidity 0–100% non-condensing
Material ABS
Description Catalog Number
RFID Authentication Card (Quantity of 10) EVRFIDKF-10
Electric Vehicle Charging SolutionsDimensions
11© 2011–2013 Schneider ElectricAll Rights Reserved
Dimensions
Indoor Wall-Mount Charging Stations
Outdoor Wall-Mount Charging Stations
Figure 2: Indoor Wall-Mount Charging Station
in.(mm)Dimensions:
9.53(242)
12.7(323)
4.4(111)
Figure 3: Outdoor Wall-Mount Charging Station Figure 4: Wall-Mount Cable Bracket with Connector Dock
9.8(250)
13.1 (333)
18.1 (460)
20.5 (521)
6.7(170)
7.1(181)
in.(mm)Dimensions:
4.0(102)
2.0(50.8)
3.8(97)
5.8(148)
5.0(127)
in.(mm)
Dimensions:
Electric Vehicle Charging SolutionsDimensions
© 2011–2013 Schneider ElectricAll Rights Reserved
12
Outdoor Pedestal-Mount Charging Stations
Figure 5: Non-Networked Pedestal-Mount Charging Stations
Figure 6: Networked Pedestal-Mount Charging Stations
Figure 7: Pedestal Base for Outdoor Charging Stations
49.9(1267)
6.6(166.5)
7.9(200)
7.9(200)
5.2(133)
Single Unit Dual Unit
13.0(330)
6.7(170)
13.0(330)
in.(mm)Dimensions:
49.9(1267)
0.87(22)
6.7(170)
7.9(200)
7.9(200)
5.2(133)
Single Unit Dual Unit
13.0(330)
7.0(179)
13.0(330)
in.(mm)Dimensions:
* NOTE: Left antenna is present on gateway units only
See Note *
7.9(200) 5.9
(150)
7.9(200)
.70(17.5)
3.9(98)
4.1(103)2x
1.8(46)2x 4.3
(108)2x
2x
4x R .30(7.5)
3.0(76.2)
Dimensions: in.(mm)
Electric Vehicle Charging SolutionsDimensions
13© 2011–2013 Schneider ElectricAll Rights Reserved
RFID Accessory Dimensions
Figure 8: Handheld Programmer for Level 2 RFID Units Figure 9: RFID Authentication Cards
2.5(63.5)
7.0(178)
.75(19)
in.(mm)Dimensions:
2.13(54)
.034(.86)
3.37(85.5)
in.(mm)Dimensions:
© 2011–2013 Schneider ElectricAll Rights Reserved
Electric Vehicle Charging Solutions Dimensions
14
Electric Vehicle Charging SolutionsDimensions
15© 2011–2013 Schneider ElectricAll Rights Reserved
2800CT1001R02/13 © 2011–2013 Schneider Electric All Rights ReservedReplaces 2800CT1001R07/12
Schneider Electric USA, Inc.1415 S. Roselle RoadPalatine, IL 60067 USA1-888-778-2733www.schneider-electric.us
Schneider Electric™ and EVlink™ are trademarks or registered trademarks of Schneider Electric. All other trademarks are property of their respective owners.