Electric On/Off & Control Valves · 2018-02-14 · 1 each for open and close (SPDT 250V AC/10A...

Electric On/Off & Control Valves

Electric On/Off & Control Valves

Sealed by O-ring in all interfaces, and double o-ring sealing for IP68(option)

EP type grease, maintenance free service for a long period time

Difference size depending on actuator torque, and knob on hand wheel for easy operation

Precisely machined double worm gear c/w minimum back-lash, low noise, high output torque

Provided by double worm gearing to keep position of valve unchanged against reverse torque fromvalve

Hard anodized Aluminum casting and external epoxy powder coated against severe industrialenvironment.

- To prevent over run of travel angle when limit switch fails

- Standard 2 X PF 3/4 (Max 1 ) cable entry for variouscable gland

- Auto/Manual switch able lever hand wheel engagement foremergency manual operating

- Drive force automatically resorted by motor start unlesslever padlock to prevent it

- Easy machining for step adaption- Standard ISO5211 mounting base (F03 ~ F16)for easy

mounting on valve- Large size drive bushing accept large valve stem

- Specially designed induction motor generate high startingtorque and high efficiency equip with thermal protector toprevent damage from over heating

- Anti-condensation equip with thermal

- Cover bolts are captive type designed to prevent loosing duringmaintenance or installation

- All external bolts are stainless steel for rust prevention

- To protect actuator from damage caused by overload from the driven valve over the whole travel

- High resolution potentiometer and precisely machined gearingare directly engaged with drive shaft to feedback continuousposition of valve

- Directly engaged with driving shaft to set accurate position ofvalve

- 1 ea for each travel end (open/close)- Optional Extra Limit Switches (Max 4 ea for each end)

- Large size position directly engaged with driving shaft for bettervisibility from a distance

- Spring loaded underneath keeps set position unchanged unlessused move it

ModelRatedtorque

Nm

Operatingtime

50/60Hz90

Maxboresizemm

Powerconsum-

ptionWatts

Motorinsulation

class

Rated current (A)50/60Hz

1Phase 3Phase110V 220V 380V 440V Kg

No ofhandleturns90

Weight

ATM0040

ATM0080

40

80

20/14

20/14

17

17

15

15

F

F

0.5

0.95/1.05

0.3

0.50/0.55

OK

OK

NA

NA

9

10

5

7

ATM0100

ATM0160

ATM0240

ATM0350

ATM0500

ATM0800

ATM1100

100

160

240

350

500

800

1100

21/18

26/22

26/22

31/26

31/26

39/32

20/14

23

27

27

42

42

52

52

15

40

40

40

90

180

180

F

F

F

F

F

F

F

0.95/1.05

1.60/1.70

1.62/1.72

1.72/1.80

3.60/3.90

3.80/4.20

3.90/4.30

0.50/0.55

0.85/0.90

0.87/0.92

0.92/0.95

1.30/1.60

2.05/2.20

2.15/2.30

NA

0.30/0.30

0.32/0.32

0.32/0.32

0.52/0.56

0.82/0.88

0.84/0.90

NA

0.30/0.32

0.32/0.34

0.32/0.35

0.55/0.58

0.82/0.85

0.84/0.88

10

12

12

14

14

17

17

7

15

15

20

20

25

25

EnclosureMain Power supplyControl power supplyDuty cycle (on-off)Duty cycle (modulating)MotorLimit switchesTorque switchesStall protection/set temperatureTravel anglePosition indicatorManual overrideSelf lockingMechanical stopperHeaterCable entriesLubricationTerminal blockAmbient temperatureAmbient humidityAnti vibrationExternal coating

Weather poof IP67, NEMA4 and 4X,O-ing sealed (ATM0060 IP66)110/220V AC / 1Ph / 50 / 60Hz, 380/440/VAC/9Ph / 50 / 60 / Hz 10%

110/220V AC / 1Ph / 50 / 60 Hz 10%S2, 20 ~ 50% Max 10Min ~ 30Min

S4, 30 ~ 50%, 300 ~ 1200 start/hourSquirrel caged induction motor

1 each for open and close (SPDT 250V AC/10A rating)1 each for open and close (SPDT 250V AC/10A rating except for ATM0060,0100

Built in thermal protection, High 150 5 , Low 97 1590 5 ( ° 100 )

Plate with indication arrowDe-clutchable (except for ATM0060)

Provided by double worm gearing (no brake)(except for ATM0060)1 each for each travel end (open and close),(external adjustable(ATM0060)

5W (110/220V AC) for anti-condensation2 X PF 3/4 TAP (except for ATM30,60, 2 X PT 1/2 TAP)

EP type greaseScrew and lever push type (spring loaded)

-20 ~ 7090% RH Max (Non-Condensing)XYZ 10g, 02 ~ 34Hz, 30 minutes

Dry power (Polyester)

ATM1500

(ATM0500+AG1/3)

ATM2000

(ATM0800+AG1/3)

ATM3000

(ATM1100+AG1/3)

1500

2000

3000

93/78

117/97

117/97

78

78

78

180

180

180

F

F

F

3.60/3.90

3.80/4.20

3.90/4.30

1.30/1.60

2.05/2.20

2.15/2.30

0.52/0.56

0.82/0.88

0.84/0.90

0.55/0.58

0.82/0.85

0.84/0.88

42

52

52

42

52

52

Symbol

DOM

EX

WT

ALS

ATS

EXT

SV

Description

Dome indicator

Explosion proof (Ex d II B(c) T4)

Watertight (IP68)

Auxiliary limit switches (Max 4 for each travel end)

Auxiliary torque switches (Max 4 for each travel end)

Extended travel angle (up to 120°,135°,180°, 270°)

Variation in torque and operating speed

Remark

Except for ATM0060

Except for ATM0060

Except for ATM0060

Except for ATM0060,ATM0100

Except for ATM with gear box

Please consult before order

PK

CT

RPC

Signal

Configuration

RPD

Potentiometer kit (output signal : 0 ~ 1Kohm)

Current transmitter (output : 4 ~ 20mA)

Remote position controller(by input and output signal)

Remote position controller(by input and output signal) with display (LCD)

In put: 4~20mA, 0~10 VDC, 2~10 VDC, 1~5VDC, 0~5VDC

Out put: 4~20mA, 0~10 VDC, 2~10 VDC, 1~5VDC, 0~5VDC

Refer to below signal configuration

LP1

LP2

LM1

LM2

LD

Local position control (Remote/Open/Step/Close without lamps)

Local position control (Remote/Local, Open/Step/Close with lamps)

Integrated motor starter without local control switches (On ~ off only)

Local position control (Remote/Local, Open/Step/Close with lamps)with integrated

Motor starter (Mechanical)

Local position control ((Remote/Local, Open/Stop, Close with lamps)

with Integrated motor starter, monitoring relays)

1) Type : Rotary switch2) Selecting and control:4 steps (Remote/Open/Stop/Close)for on-off only3) No local display

1) Type : Rotary switches with position lamps2) Operating - Selector switch : Remote (with Yellow lamp), Local(with Red lamps)

- Control switch : Open/Stop/Close- Local display : Green lamp at open position, Red lamp at close position

- Integrated 2 magnetic contactors for open and close without control device

1) Type : Rotary switches with position lamps

2) Operating- Selector switch:Remote(With Yellow lamp),Local(With Red lamp)- Control Switch:Open/Step/Close- Integrated 2 magnetic contactors for Open/Close,Power source for control

3) Options for remote monitoring and control- PK(0~1Kohm),CT(4~20mA output signal),RPC(or RPD) for 4-20mA input/output Signal

- Combination of electronic positioner(4~20mA input,proportional control)- Auto-calibration provides the most convenient to user without complicated

set in field

- All adjustable point are parameterized, and big size LCD display panel for indicating current status

1) Type : 2 Magnetic sensors (Rotary type)with status monitoring lamps

2) Operating : Selector switch-Off,Local,Remote(Off : Stop or turn off) Control switch-Local open,Close

3) Local display : Remote/Local,open,close,over torque

4) Remote control- Type : 500V Opto-lsolated, DC24V,AC110 both- Command : Open/Close/Stop/ESD(Emergency shut down)- Output : Relay and direct from switch(Full Open/Full Close)

5) Options- CT(Current transsmitter) : Both sink/Source type,output 4-20mA- RPC(or RPD)for 4-20mA input andoutput signal- Profuse communication : 1.5Mbps, 1 channel,SPC-3

RPC -

CT is basically R/I converter as signal transmitter after positioning of actuator.Potentiometer detects current position of actuator as resistance(0~1Kohm) and CT convert it to currentsignal(4-20mA) and send it back to main controller.Generally, it transmits 4mA at fully closed position, and 20mA at fully open position

1) Model: CT-01-A2) Power : 110V/220VAC 10% 50/60Hz 4VA Max(changeable by DIP switch)3) Output signal: 4~2-mA DC4) Load resistance: 750Ohm Max.5) Resolution : Min. 1 / 10006) Position conversion accuracy : 0.5 ~ 1.5%(Depending on mounting accuracy)7) Ambient temperature: -10oC ~ +60oC8) Ambient humidity: 90% RH Max (Non-condensate)9) Dielectric strength: 1500V AC 1Min (Input to output, Power to Ground)

10) Insulation resistance: Min. 500VDC 30Mohm11) Vibration & Shock (X, Y, Z): 10g(6g based on RMF, Frequency: 0.2 ~ 34Hz, 30Min12) LED signal : Refer to LED signal indication

1) Zero settingPut actuator 50% open position by manual, supply close command from control panel.When actuator fully close, adjust Zero volume until getting correct signal 4mA.

2) Span settingRepeat same procedure as Zero setting, but gained signal must be 20mA adjusting Span volume.

3) Repeat above procedure 2~3 times to get correct signal

SpanOpenSetting

ZeroCloseSetting

ZERO CLOSE SETTING

SPAN OPEN SETTING

POWER ON

Indication on PCB

O POW

O FAU

LED

Blue on

Yellow Flicker

Meaning

Power on

Failure in either PK. CT or Wiring

All electrical wiring is done by quick plug-in connectors.

ATM-0040

ATM-0080

ATM0100, ATM0160, ATM0240, ATM0350 ATM0500, ATM0800, ATM1100

ATM1500, ATM2000, ATM3000(GEAR BOX)

OPTION NAME

MODEL

X mm

Y mm

Z mm

0100

428

172

220

0160/0240

508

229

259

0350/0500

527

244

288

0800/1100

550

284

313

1500

538

293

506

2000/3000

550

312

531

LP2/LM2

OPTION NAME

MODEL

X mm

Y mm

Z mm

ATM0100

316

172

220

CTOPTION NAME

MODEL

X mm

Y mm

Z mm

ATM0100

340

190

220

RPC

OPTION NAME

MODEL

X mm

Y mm

Z mm

0100

419

172

220

0160/0240

499

229

259

0350/0500

518

244

288

0800/1100

541

284

313

1500

529

293

506

2000/3000

541

312

531

LP4/LD1

OPTION NAME

MODEL

X mm

Y mm

Z mm

0100

428

172

220

0160/0240

508

229

259

0350

527

244

288

BP

OPTION NAME

MODEL

X mm

Y mm

Z mm

0160/0240

517

284

259

0350/0500

536

284

288

0800/1100

559

284

313

1500

547

284

506

2000/3000

559

284

531

LD2

AC 110/220V, 50/60Hz, 1Ph(On-off)

AC 380/480V, 50/60Hz, 3Ph(On-Off) AC 110/220V, 50/60Hz, 3Ph(Modulating:RPC)

ATM0040 ATM0080

ATM0080(3Ph) ATM0080(RPC)

AC 110/220V, 50/60Hz, 1Ph(On-off)

AC 110/220V, 50/60Hz, 1Ph(On-off)

AC 380/480V, 50/60Hz, 3Ph(On-Off)

ATM0100 ATM0100(RPC)

ATM0100(3Ph)

AC 110/220V, 50/60Hz, 3Ph(Modulating:RPC)

CLS : Close Limit Switch (250VAC 10A)OLS : Open Limit Switch (250VAC 10A)ACLS : Aux. Close Limit Switch (250VAC 10A)AOLS : Aux. Open Limit Switch (250VAC 10A)ACTS : Aux. Close Torque Switch (250VAC 10A)AOTS : Aux. Open Torque Switch (250VAC 10A) TP : THERMAL PROTECTOR (250VAC 15A OPTION)* Each actuator should be powered through its ownindividual switch or relay contacts to prevent cross feedvetween two or more actuators.

AC 110/220V, 50/60Hz, 1Ph(On-off)

AC 380/480V, 50/60Hz, 3Ph(On-Off)

ATM0160~3000 ATM0160~3000(RPC)

ATM0160~3000(3Ph)

AC 110/220V, 50/60Hz, 3Ph(Modulating:RPC)


AC 110/220V, 50/60Hz, 1Ph(CT)

AC 380/480V, 50/60Hz, 3Ph(CT)

ATM0100(CT CARD)

ATM0160~3000(CT CARD)

ATM0160~3000(CT CARD)

AC 110/220V, 50/60Hz, 1Ph(CT)


Water Distribution pipes.Industrial Cleaning Machined.SterilizersAir Conditioners, Water FiltersMedical Equipments, Vacuum Packing

Valve Size

Actuator Model

Actuator Type

Electrical

Output Torque

Operating Time

Operating Type

Rotating Angle

Fluid Temperature

Pressure Range

Body Material

ATM01

Electric

AC 95 - 230V (Free Volt)

2Nm

5~7Sec

ON/OFF

90 3

-20 ~ 100

10Kgf/cm2

15A(1/2 ) 20A(3/4 ) 25A(1 )

ModelATM01-15S1ATM01-20S1ATM01-25S1

Size1/23/41

15A20A25A

535353

646464

74.574.578.5

556376

151520

A A1 H L D(mm)

SUS304 / BODY SUS304 / BALL PTFE / SEAT

Water Distribution pipes.Industrial Cleaning Machines.Sterilizers, BoilersAir Conditioners , Water FiltersMedical Equipments, Vacuum Packing

Valve Size

Actuator Model

Actuator Type

Electrical

Output Torque

Operating time

Operating Type

Rotating Angle

Fluid Temp

Pressure Range

Body Material

ATM0040

Electric

110V AC,220V AC,380V AC, 440V AC

40Nm

20/50Hz, 14/60Hz

ON/OFF, Modulating

90 3

-10 ~ 90

10Kgf/cm2

10A(3/8 ) 15A(1/2 ) 20A(3/4 ) 25A(1 ) 32A(1-1/4 ) 40A(1-1/2 50A(2 )

ModelATM0040-10S1ATM0040-15S1ATM0040-20S1ATM0040-25S1ATM0040-32S1ATM0040-40S1ATM0040-50S1

10A15A20A25A32A40A50A

Size3/81/23/41

1-1/41-1/2

2

113.5113.5113.5113.5113.5113.5113.5

A121.8121.8121.8121.8121.8121.8121.8

A1188200220224230246245

H45

56.559717882

100

L7.7

9.2

12.5

15

20

25

32

D(mm)


Water Distribution pipesIndustrial Cleaning MachinesSterilizers, BoilersAir Conditioners , Water FiltersMedical Equipments, Vacuum Packing

Valve Size

Actuator Model

Actuator Type

Electrical

Output Torque

Operating Type

Rotating Angle

Fluid Temp

Pressure Range

Body Material

Operating time

ATM0040

Electric

110V AC,220V AC,380V AC, 440V AC

60Nm

ON/OFF, Modulating

90 3

-10 ~ 90

10Kgf/cm2

10A(3/8 ) 15A(1/2 ) 20A(3/4 ) 25A(1 ) 32A(1-1/4 ) 40A(1-1/2 50A(2 )

ModelATM0040-08S3ATM0040-10S3ATM0040-15S3ATM0040-20S3ATM0040-25S3ATM0040-32S3ATM0040-40S3ATM0080-50S3

08A10A15A20A25A32A40A50A

Size1/43/81/23/41

1-1/41-1/2

2

113.5113.5113.5113.5113.5113.5113.5160

A121.8121.8121.8121.8121.8121.8121.8121

A1205205205207216227231218

H6060657585

100110130

L0810152025324050

D(mm)


ATM0080

100Nm

21/50Hz,

18/60Hz20/50Hz, 14/60Hz

Water distribution pipesIndustrial cleaning machinesSterilizers, Boilers Air conditioners, Water filtersMedical equipments, Vacuum packingFood & Beverage linesVacuum distribution pipes

Valve Size

Actuator Model

Actuator Type

Electrical

Rotating Angle

Operating Type

Fluid Temp

Rating

Body Material

Electric

110V AC,220V AC,380V AC, 440V AC

90 3

ON/OFF, Modulating

-10 ~ 90 (-10 ~ 150 )

JIS10K (20K) (40K) ANSI150# (300#) (600#)

SUS304 (SUS316)/Body SUS304 (SUS316)/Ball PTFE (GRAPHITE)/Seat

( ) Option

15A ~ 350A

ATM0040 ~ ATM3000

Model mm inch A A1 H L G C D t N-H

JIS10K RF (mm)Size

ATM0040-15F 15A 1/2 113.5 121.8 233 108 52 70 95 12 4-15ATM0040-20F 20A 3/4 113.5 121.8 236 117 58 75 100 14 4-15ATM0040-25F 25A 1 113.5 121.8 245 127 70 90 125 14 4-19ATM0040-32F 32A 1-1/4 113.5 121.8 248 140 80 100 135 16 4-19ATM0040-40F 40A 1-1/2 113.5 121.8 269 165 85 105 140 16 4-19ATM0080-50F 50A 2 160 121 256 178 100 120 155 16 4-19ATM0160-65F 65A 2-1/2 338 229 406 190 120 140 175 18 4-19ATM0160-80F 80A 3 38 229 450 203 130 150 185 18 8-19ATM0350-100F 100A 4 357 244 492 229 155 175 210 18 8-19ATM0500-125F 125A 5 357 244 533 356 185 210 250 20 8-23ATM0500-150F 150A 6 357 244 578 394 215 240 280 22 8-23ATM1100-200F 200A 8 357 284 700 457 265 290 330 22 12-23ATM2000-250F 250A 10 357 293 920 533 325 355 400 24 12-25ATM3000-300F 300A 12 357 293 1300 610 375 400 445 24 16-25ATM3000-350F 350A 14 357 293 1350 686 415 445 490 26 16-25

Water distribution pipesIndustrial cleaning machinesSterilizers, Boilers Air ventilationMedical equipments, Vacuum packingAir ventilation systems

Valve Size

Actuator Model

Actuator Type

Electrical

Rotating Angle

Operating Type

Fluid Temp

Rating

Body Material

Electric

110V AC,220V AC,380V AC, 440V AC

90 3

ON/OFF, Modulating

-10 ~ 90 (-10 ~ 150 )

JIS10K Wafer ANSI150# Wafer

FC (SUS304)/Body SUS304 (SUS316)/Disc EPDM (MTFE)/Seat

( ) Option

40A ~ 600A

ATM0040 ~ ATM3000

Model mm inch

JIS10K WAFER (mm)Size

ATM0040-40BF 40A 1-1/2 113.5 121.8 397 58 33 40 86ATM0040-50BF 50A 2 113.5 121.8 412 66.5 43 52 105ATM0080-65BF 65A 2-1/2 160 121 324 71 46 65 114ATM0080-80BF 80A 3 160 121 346 83 46 80 129ATM0100-100BF 100A 4 258 172 528 95 52 100 155ATM0160-125BF 125A 5 338 229 597 110 56 125 180ATM0240-150BF 150A 6 338 229 624 124 56 150 207ATM0350-200BF 200A 8 357 244 740 163 60 198 260ATM0500-250BF 250A 10 357 244 850 227 68 248 331ATM0600-300BF 300A 12 357 244 905 252 78 298 377ATM0800-350BF 350A 14 380 284 968 271 78 327 416ATM1100-400BF 400A 16 380 284 1080 343 102 387 475ATM1500-450BF 450A 18 357 293 1350 366 114 438 535ATM2000-500BF 500A 20 357 293 1490 421 127 477 590ATM3000-600BF 600A 24 357 293 1640 493 154 560 695

A A1 H H1 L d D

Electric On/Off & Control Valves · 2018-02-14 · 1 each for open and close (SPDT 250V AC/10A...

Documents

Transcript of Electric On/Off & Control Valves · 2018-02-14 · 1 each for open and close (SPDT 250V AC/10A...