Electric In-Line Fuel Pumps - pit stop usaﬁ cient pump operation for systems with a return line to...

1132011 OPEN WHEEL

Carbureted Bypass Style Fuel Pressure Regulator HLY12-803BP

Adjustable regulator has 3/8" inlet and outlets and promotes quiet, ef-fi cient pump operation for systems with a return line to the tank. Adjusts from 4-1/2 to 9 PSI.

Fuel Pressure Regulator HLY12-704

Die cast aluminum regulator has a single 1/2" NPT inlet port, two 1/2" NPT outlet ports and a 7/16" restriction. Adjusts from 4-1/2 to 9 PSI.

Fuel Pressure RegulatorsEconomical die cast aluminum fuel pres-

sure regulators are available in low (1 to 4 PSI) and high (4-1/2 to 9 PSI) pressure versions. Each has 3/8" NPT ports and a 7/32" restriction.Part No. DescriptionHLY12-803........High Pressure Regulator, 4-1/2 To 9 PSIHLY12-804........Low Pressure Regulator, 1 To 4 PSIHLY12-807........Diaphragm Repair Kit, For HLY12-803 And HLY12-804

Electric In-Line Fuel PumpsEngineered for fuel injected engines,

high output pumps are mounted in-line, rather than inside the fuel tank, for easy installation. Ideal for serious performance.Part No. DescriptionHLY12-920........480 PPH @ 15 PSIHLY12-927........258 PPH @ 15 PSI

110 GPH “Blue” Electric Fuel Pump HLY12-802-1

Pump pro vides con stant fuel fl ow with no pul sa tion. Pumps are pre-set at 14 PSI, with a free fl ow capacity of 110 GPH and a fl ow rate of 70 GPH at a steady 9 PSI. Pumps use an ex ter nal ly ac ces si ble pres-sure re lief valve and weigh only 3 lbs. Ser vice able from ei ther the pump end or the brush end. Regulator HLY12-803 is included.Replacement Parts

Part No. DescriptionHLY12-806........Check Valve Kit HLY12-810........Safety Pressure Switch HLY12-811 ........Rotor And Vane Kit

97 GPH “Red” Electric Fuel Pump HLY12-801-1

Pump incorporates an externally acces-sible pressure relief valve, delivers 4-7 PSI and does not require a separate pressure regulator valve. Tumble polished, billet look pump weighs less than 3 lbs. and includes mounting bracket.

Integrated Cooling System Check ValveValve fi ts in lower radiator hose

and accepts standard dry break couplers on the Hot Head competi-tion engine heater. Check Valves fi t popular 1-3/4" dia. radiator hoses.Part No. DescriptionHPE4150 ..........Check Valve, 1-1/2 Includes (2) 1/2" NPT FittingsHPE4175 ..........Check Valve, 1-3/4 Includes (2) 1/2" NPT FittingsHPE4176 ..........Check Valve, 1-3/4 Includes Remote Style Adapter With

-10 AN Fittings

Remote Kit HPE5150For cars where lower radiator

hose access is tight, remote kit attaches to roll cage or chassis tubing with included clamps, easing competition engine heater connection. Requires HPE4176 Hot Head Integrated Cooling System Check Valve.

Competition Engine Heater HPE4000

Warm up an engine without starting it. A warm engine has less friction loss, maintains proper clearances and has more effi cient com-bustion. Heater connects to the cooling system via an integrated check valve (sold separately). 8' long input and output hoses are included. The “rapid-heat” setting quickly heats the entire system. At 160°-180°F, the unit au-tomatically switches to a “maintain” mode. Heater is light (25 lbs.), compact (24" x 10" x 9") and requires a 4000 watt, 220 volt connection. Electric cord not included. May be used with 110V if used with below power cord splitter.

Power Cord Splitter HPE6000

Adapts 220V to dual 110V power cord splitter (3000W only) so that the Competition Engine Heater may be powered by a 4000 watt generator with dual 110V connections.

114 2011 OPEN WHEEL

Small Block Chevy Ultimate Duty Billet Connecting Rods

American-made, true billet connecting rods are manufactured from certifi ed 4340 steel and are fully CNC-machined. Rods, which are stress re-lieved and shot peened to eliminate the possibil-ity of stress risers, are fi tted with 7/16" ARP 2000 fasteners and bushed for fully fl oating wrist pins.

Part No. Description Journal Length Weight

HRCBR6000 SB Chevy Billet Rods Large 6.000" 668 gramsHRCBR6125 SB Chevy Billet Rods Large 6.125" 670 grams

Small Block Chevy Pro Series 4340 Forged Crankshafts

Top quality 4340 steel crankshafts are forged in the USA and machined by industry leader Callies Performance Prod-ucts. Each crankshaft has journals with .125" Tru-Form fi llet radii and 1" dia. Angalite lightening holes in all rod throws. Callies’ Perma-Tough surface hardens the units to a depth of .080". All main and rod journals have a roundness within 60 millionths and taper is held within .0003".

Part No. Description Main Stroke Rod Length

HRC353457 SB Chevy Crankshaft 350 3.480" 5.700"HRC353860 SB Chevy Crankshaft 350 3.875" 6.000"HRC354060 SB Chevy Crankshaft 350 4.000" 6.000"HRC404260 SB Chevy Crankshaft 400 4.250" 6.000"

Fuel Injection SystemsFuel injection units for small block

Chevys with 1957-up cylinder heads include sealed nozzles for protection on dirt tracks. Please call a sales associate with specifi c requirements. All fuel injection units are special order. Ram tubes are not included and are sold individually.

PillsReplacement pills are sold individually.

Part No. Description Part No. Description Part No. DescriptionHILF565-40 .... .040" Pill HILF565-80 ....... .080" Pill HILF565-120 .... .120" PillHILF565-45 .... .045" Pill HILF565-85 ....... .085" Pill HILF565-125 .... .125" PillHILF565-50 .... .050" Pill HILF565-90 ....... .090" Pill HILF565-135 .... .135" PillHILF565-55 .... .055" Pill HILF565-95 ....... .095" Pill HILF565-140 .... .140" PillHILF565-60 .... .060" Pill HILF565-100 ..... .100" Pill HILF565-145 .... .145" PillHILF565-65 .... .065" Pill HILF565-105 ..... .105" Pill HILF565-150 .... .150" PillHILF565-70 .... .070" Pill HILF565-110 ..... .110" Pill HILF565-155 .... .155" PillHILF565-75 .... .075" Pill HILF565-115 ..... .115" Pill HILF565-160 .... .160" Pill

Brass Primary Bypass HILF510

D-Cel HarnessSprint car, go-cart or enduro racers will

appreciate this unique harness. It can ef-fect up to a 70% reduction in neck tension. System wraps around the driver, using the pelvis as an anchor. Harness assures easy access in and out of the car and has a quick, one time adjustment. Part No. DescriptionHUTDCL-MED ..Medium, 150-200 lbs., 5'-6'4" HeightHUTDCL-LRG ..Large, 200-290 lbs., 5'8"-6'6" HeightHUTDCL-XLG ..X-Large, 290 lbs.+, 5'8"-6'6" Height

Hybrid Head And Neck Restraint

A combination of the R3 and Hutchens II, it's a technically advanced head and neck restraint system with Poly-Tech webbing for unsurpassed angular impact protection and improved stability. The low back design eases entry and exit. There are no annoying tops to hook on the bars during exits.Part No. DescriptionHUTHYR-MED-20 ..... Medium, 36"-42" ChestHUTHYR-LRG-20 ...... Large, 42"-48" ChestHUTHYR-XLG-20 ...... X-Large, 48"-54" Chest

R3 Head And Neck Restraint Restraint moves with the driver during a

crash, maintaining the relationship of the head, neck and torso. System meets NASCAR mandated SFI 38.1 specifi cations. Systems may be strapped to the driver, or left in the car and anchored to the restraint system. Choose systems for 10° or 20° layback racing seats.

Description10° Layback

Part No.20° Layback

Part No.Strap-On Systems

Medium, 36"-42" Chest HUTR3-MED-10 HUTR3-MED-20Large, 42"-48" Chest – HUTR3-LRG-20

In-Seat SystemsMedium, 36"-42" Chest HUTR3-MED-10-IS HUTR3-MED-20-IS

Large, 42"-48" Chest HUTR3-LRG-10-IS HUTR3-MED-20-IS

Hutchens DeviceStabilizes the driver’s head throughout the

race, providing safety, comfort and easy access. The system “anchors” to the lap belt buckle and has a quick, one time adjustment (no seat adjustments). The helmet D-ring kit attaches to either side of the helmet for even more protection. Part No. DescriptionHUT-SML ..........Small, 30-1/2"-38" Chest, 27"-38" Waist, 4'-5'6" HeightHUT-MED .........Medium, 38"-45" Chest, 35"-45" Waist, 4'9"-5'10" HeightHUT-LRG ..........Large, 45"-52" Chest, 42"-52" Waist, 5'-6'6" HeightHUT-DRK .........Helmet D-Ring Kit

1152011 OPEN WHEEL

Hyperco Coil Springs are recognized by top competitors worldwide as one of the best available. Hyperco starts with the highest quality wire. In spec tions are performed before, during, and after manufacturing to meet stringent quality standards. All Hypercoils are dark blue powder coated (except black rear pigtail springs) and etched with the rate.

Coil-Over SpringsBlue Powder Coated

Rate 4" Tall 7" Tall 8" Tall 10" Tall 12" Tall 14" Tall1-7/8" I.D Coil-Over Springs100 – – – HYP1810D0100 –112 – – – HYP1810D0112 –125 – – – HYP1810D0125 –137 – – – HYP1810D0137 –150 – – – HYP1810D0150 –162 – – – HYP1810D0162 –175 – – – HYP1810D0175 –185 – – – HYP1810D0185 –200 – – – HYP1810D0200 –225 – – – HYP1810D0225 –250 – – – HYP1810D0250 –275 – – – HYP1810D0275 –300 – – – HYP1810D0300 – –325 – – – HYP1810D0325 – –350 – – – HYP1810D0350 – –375 – – – HYP1810D0375 – –400 – – – HYP1810D0400 – –425 – – – HYP1810D0425 – –450 – – – HYP1810D0450 – –475 – – – HYP1810D0475 – –500 – – – HYP1810D0500 – –2-1/4" I.D. Coil-Over Springs200 – – HYP188A0200 – – –250 – – HYP188A0250 – – –275 – – HYP188A0275 – – –300 – – HYP188A0300 – – –325 – – HYP188A0325 – – –350 – – HYP188A0350 – – –375 – – HYP188A0375 – – –400 – – HYP188A0400 – – –425 – – HYP188A0425 – – –450 – – HYP188A0450 – – –500 – – HYP188A0500 – – –575 – – HYP188A0550 – – –2-1/2" I.D. Coil-Over Springs110 – – – HYPCO10-110 HYPCO12-110 HYPCO14-110125 – – – HYPCO10-125 HYPCO12-125 HYPCO14-125150 – – – HYPCO10-150 HYPCO12-150 HYPCO14-150160 – – – – – HYPCO14-160175 – – – HYPCO10-175 HYPCO12-175 HYPCO14-175185 – – – – HYPCO12-185 HYPCO14-185200 – – HYPCO8-200 HYPCO10-200 HYPCO12-200 HYPCO14-200225 – – HYPCO8-225 HYPCO10-225 HYPCO12-225 HYPCO14-225250 – – HYPCO8-250 HYPCO10-250 HYPCO12-250 HYPCO14-250275 – – HYPCO8-275 HYPCO10-275 HYPCO12-275 HYPCO14-275300 – – HYPCO8-300 HYPCO10-300 HYPCO12-300 HYPCO14-300325 – – HYPCO8-325 HYPCO10-325 HYPCO12-325 HYPCO14-325350 HYPCO4-350 HYPCO7-350 HYPCO8-350 HYPCO10-350 HYPCO12-350 HYPCO14-350375 – – HYPCO8-375 HYPCO10-375 HYPCO12-375 HYPCO14-375400 HYPCO4-400 HYPCO7-400 HYPCO8-400 HYPCO10-400 HYPCO12-400 HYPCO14-400425 – – HYPCO8-425 HYPCO10-425 HYPCO12-425 –450 – HYPCO7-450 HYPCO8-450 HYPCO10-450 HYPCO12-450 HYPCO14-450475 – – HYPCO8-475 HYPCO10-475 HYPCO12-475 –500 HYPCO4-500 – HYPCO8-500 HYPCO10-500 HYPCO12-500 HYPCO14-500550 – – HYPCO8-550 HYPCO10-550 HYPCO12-550 –600 HYPCO4-600 – HYPCO8-600 HYPCO10-600 HYPCO12-600 –650 – – HYPCO8-650 HYPCO10-650 HYPCO12-650 –700 – – HYPCO8-700 HYPCO10-700 HYPCO12-700 –750 – – HYPCO8-750 – HYPCO12-750 –800 – – HYPCO8-800 HYPCO10-800 HYPCO12-800 –850 – – HYPCO8-850 – HYPCO12-850 –

Hydraulic Load-Centering Spring PerchPerch corrects the uneven load

characteristics of coil-over springs and centers spring forces on the shocks to reduce bending and inter-nal friction. Perches fi t on a 2-1/2" coil-over top and are used on dirt and pavement late models. Optional dirt cover extends perch life. Both are sold individually. Part No. DescriptionHYP12010 ........Hydraulic Spring Perch, 2.5"HYP12000 ........Dirt Cover For Spring Perch

Take-Up Springs Springs keep coil-overs prop-

erly indexed in platforms. Should be used with stacked spring divider HYP18DS100.Part No. DescriptionHYPCS100 .......2-1/2" I.D. x 4" Free Length, 25 lb. RateHYPCS600 .......2-1/2" I.D. x 6" Free LengthHYP18DS100 ...Stacked Spring Divider, Couples 2-1/2" I.D. Take-Up Spring

HYPCS100 HYP18DS100

2-1/2" I.D. x 10" Tall Progressive Spring HYPCO10-175/500

Erin Winscher Photo By: RC Custom Design

Brady Short Photo By: Jim DenHamer

116 2011 OPEN WHEEL

Top WingsHepfner Racing Products is a leader in

the design and manufacturing of sprint car wings. CNC punched and formed, each wing is identical and all internal components are formed and lightened. Made from .020" 6061 aluminum with 4130 plated steel internal posts. Part No. DescriptionHRPFLT0510 ............ Top Wing Flat With Recessed RivetsHRPFLT0510-K ........ Top Wing Flat With Recessed Rivets, In Kit Form,.................................. Comes in a Tube, UPS Able

HRPNPD0512 .......... Top Wing, 2-1/2" Dished, Non-Recessed RivetsHRPNPD0512-K ....... Top Wing, 2-1/2" Dished, Non-Recessed Rivets, Kit Form, UPS AbleHRP85186 ................ Top Wing Posts, 2 Pcs.

Nose Wing HRPVFT0801-S“Super” nose wing is tall and angled

with a 1" dish for increased down-force. Exclusive recessed rivet design means greater strength, im-proved aerodynamics, quicker mud removal and easier vinyl application. CNC punched and formed, each wing is identical.

Radiator Air BoxAluminum air box has lightening

holes, fully radiused edges and pre-formed quick fastener fl anges. Fits 20" wide radiators in Maxim or Eagle chassis.Part No. DescriptionHRP8300 ..........Air Box ChannelHRP8301 ..........Air Box Front Panel

MSD Box Mount HRP8360.050" thick aluminum Mount is

drilled to accept an MSD Ignition control and has quick fastener fl anges.

Two-Gauge Mount HRP8361Aluminum gauge mount accepts

2-5/8" dia. gauges and has a shut-off switch hole and quick fastener fl anges.

K&N Air Box Guard HRP8370

Prevents rocks or debris from damag-ing air box. Sold complete with hon-eycomb screen.

Radiator Rock Screen HRP8067

Rock screen, made of .050" thick aluminum with billet frame and fi tted with a stainless steel mesh, protects radiator from rocks and debris.

Rock Screen HRP8069Black powder coated, man-

drel bent steel screen attaches to the roll cage of most chassis and adds protection for driver.

King Pin Reamer HRP6107 Constructed from durable stainless steel,

Front Bumper With Upper Tube HRP8076-B Constructed from durable stainless

steel, bumper includes upper tube for improved front end protection.

Front BumpersTubular front bumpers, in lightweight

aluminum or stainless steel, are 19" wide and 7" deep.Part No. DescriptionHRP8075 ..........Aluminum BumperHRP8076 ..........Stainless Steel Bumper

Rear Bumper HRP8077Stainless steel, 1" dia. bumper fi ts Maxim, Eagle and Stealth chassis.

Nurf Bars“Shorty” nurf bars are 1" dia.

stainless steel and fi t Maxim and Eagle chassis.Part No. DescriptionHRP8078 ..........Left Hand Nurf BarHRP8079 ..........Right Hand Nurf Bar

Nose Wing MountsRigid nose wing mounts are

manufactured from stainless steel.Part No. DescriptionHRP8165-LH ....LH Side Nose Wing MountHRP8165-RH ....RH Side Nose Wing Mount

Rear Wing TreesTubular, telescoping rear wing

trees support the rear of the top wing and reduce wind resistance on Eagle or Maxim chassis with HRP top wings.Part No. DescriptionHRP8080 ..........Tubular 4130 Steel Rear Wing TreeHRP8082 ..........Aerodynamic Rear Wing Tree

Brake Pedal HRP8100Manufactured from durable,

4130 chrome moly.

Heel Riser HRP8063Tapered aluminum heel riser is

1-1/2" tall and mounts under the ac-celerator pedal for improved leverage and comfort.

Power Steering Top Plate HRP8299Billet aluminum, short top plate

mounts power steering box to chassis.

1172011 OPEN WHEEL

Part No. Description Part No. DescriptionReplacement Round Blades Replacement Heads

IHKBL02 #2 Blades (12) IHKHD01 #1 Head .053" WideIHKBL03 #3 Blades (12) IHKHD02 #2 Head .090" WideIHKBL04 #4 Blades (12) IHKHD03 #3 Head .150" WideIHKBL05 #5 Blades (12) IHKHD04 #4 Head .215" WideIHKBL06 #6 Blades (12) IHKHD05 #5 Head .290" WideIHKBL08 #8 Blades (12) IHKHD06 #6 Head .375" WideIHKBL10 #10 Blades (12) IHKHD08 #8 Head .500" WideIHKBL12 #12 Blades (12) IHKHD10 #10 Head .625" Wide

IHKHD12 #12 Head .750" Wide

Tire Grooving Iron IHK125

The pistol grip is light and stays cool. The solid brass head keeps the heat “just ahead” of the cut-ting blade to quickly groove dirt track tires. Cut depth is controlled by the ad just able blade. Iron has a 250 watt capacity, and includes .215" wide brass #4 head, twelve #4 blades and 7-foot power cord.

Tel-Tac Dash Mount BracketsHRP8362

Mount a Tel-Tac at the proper angle. Aluminum brackets install using quick fasteners.

Torque Ball Shield HRP8225Protects driver’s legs and feet during a U-joint failure.

Torsion Bar Tray HRP6384Lightweight aluminum tray, which

may be placed on the front or rear bumpers, eases between race mainte-nance by providing a convenient area to place torsion bars, tools, etc.

Trailer AccessoriesPart No. DescriptionHRP6009 ..........Nose Wing TrayHRP6550 ..........Top Wing Wall TrayHRP6551 ..........Top Wing Roof MountHRP6553 ..........Vertical Nose Wing MountHRP6776 ..........Axle Rack, Two Front Axles, One Rear EndHRP678-3 .........Steering Gear Wall Mount, Gen. 2HRP6781 ..........Fuel Cell Wall Mount

Wall Mount Spacer Tray HRP6181Aluminum tray is 23" long, mounts on trailer wall to keep axle spacers in a convenient location.

Sprint Car Wheel Wrench HRP6355

Designed to offer maximum leverage for loosening or tightening wheels.

Fuel Funnel Wall Rack HRP6261

Aluminum rack stores a “D”-shaped fuel funnel.

Tire Gauge HolderStores tire gauge in a convenient spot.

Part No. DescriptionHRP6380 ..........Small Tire Gauge HolderHRP6383 ..........Large Tire Gauge Holder

Header Rack HRP6700A

Stainless steel rack hugs the trailer wall and holds spare ex-haust headers tightly. Accepts spread port small block Chevy headers. Sold each.

Ratchet Strap Holder HRP6007

Keep ratchet straps organized with this 8" long strap holder. Holds two tie downs.

Nitrogen Bottle Holder HRP6060

Two-piece holder keeps bottle secure.

HRP6553

HRP6781(Tank not Included)

HRP6009

HRP6776

Nick Alden

118 2011 OPEN WHEEL

Professional Wireless Scale System INT170127-W

RFX wireless system is certifi ed to 0.1% accuracy, offering a secure, wireless connection with USB and RS232 output. Large, 1/2" backlit display characters are easily read. System has a target tune feature and can store 100 chassis set-ups, recall baseline set-up, calculate center of grav-ity and display user selectable modes. Four wireless, RFX billet 15" x 15" x 2-1/2", 1,500 lb. pads, one touch wireless indicator with case, pad storage case, USB cable for PC, race car management software and AA alkaline batteries are included. Two-year warranty.

Quick Weigh Wireless Scale System INT170126-W

Quick Weigh's integrated RFX wireless technology assures 0.1% accuracy and secure wireless com-munication. System has large, 1/2" backlit display characters, USB and RS232 output, and can store 100 chassis set-ups, recall baseline set-up, calculate center of gravity, display user selectable modes, and target tuning. Includes four wireless, RFX billet, 15" x 15" x 2-1/2", 1,500 lb. pads, one touch wireless indicator with case, AA alkaline batteries and a two-year warranty.

E-Z Weigh Cabled Scale System INT170125Intercomp's best selling

scale system. Cabled E-Z Weigh Scale System uses large, easy-to-read display of weights and percent-ages, and is certifi ed to 0.1% accuracy. Unit has a target tune feature and can display set-ups to one hundredth of a percent, store 100 chassis set-ups, recall baseline set-up, calculate center of gravity and display user selectable modes. Includes cabled indicator with case, four billet 15" x 15" x 2-1/2", 1,500 lb. capacity scales, 9-volt rechargeable battery and two-year warranty.

Scale System Carrying Case INT100055-R

Heavy duty, ATA300 approved carrying case is designed to store four 2-1/2" tall, low profi le scale pads, control box and cables. Case, which is 21" x 17-1/2" x 21", features mil-spec latches and handles.

Scale Cart INT100346A high quality aluminum scale

cart complete with wheels. Cart holds four pads, cables, control-ler and has space for accesso-ries.

Scale Pad Leveler With Roll-Off Pad INT170133

Lightweight aluminum leveler is designed to fi t any 15" x 2.5" scale pads. Allows the car to be rolled off the scale pad and back on with little effort. Sold in sets of four.

Digital Air Pressure GaugeINT360045

Rapid, highly accurate, backlit digital gauge has 0.5" display, and reads in 0-100 PSI (0.1 increments). Keypad calibration, push button zero, peak hold function, thumb op-erated bleed off, and 20" whip hose with 45° swivel nozzle included.

Deluxe Air Pressure GaugesDeluxe Air Gauges incorporate a

patented internal mechanism which provides far more resilience to extreme punishment. Available in standard, glow-in-the-dark or liquid-fi lled, every unit includes a high quality thumb-operated bleeder and swivel nozzle on a 17" Goodyear hose. High visibility with major/minor graduation marks.

Description0-15 PSIPart No.

0-30 PSIPart No.

0-60 PSIPart No.

Standard, 2" Dia. INT360062 INT360063 INT360064Liquid-Filled, 2-1/2" Dia. INT360065 INT360066 INT360067

Glow-In-The-Dark, 2-1/2" Dia. INT360068 INT360069 INT360070Glow-In-The-Dark, 4" Dia. INT360058 INT360059 INT360060

Tire Durometer INT360092Type-A hardness tester allows quickly

checking tire compound. Gauge reads 0-100.

INT360062

1192011 OPEN WHEEL

Memory Tire Pressure Gauge INT102058

Advanced tire pressure monitoring system features dual, digital backlit display of all pressures including OUT/COLD, IN/HOT and calculates GAIN, while compensating for changes in barometric pressure. Memory allows storing up to ten complete sets of pressures. Unit includes a standard RS232 output and operates on a standard, 9-volt battery. May be interfaced with #INT102065-R Race Car Manage-ment Software.

Analog Shock Infl ation And Pressure Gauge INT100675-A

Specialized gauge allows monitoring pressure during the shock infl ation process. Liquid-fi lled unit has a range of 0-300 PSI and 0-20 BAR.

Infrared PyrometersInfrared Pyrometers provide quick tem per-

a ture read ings. Point, and squeeze trig ger to check temperatures of rotors, tires, fl uids, etc.Part No. DescriptionINT360018-E ....Infrared Temp Gun w/Case (-58° to 1,022°F)INT360084-E ....Mini Infrared Laser Temp Gun (-22° to 518°F)

Lap Timer System INT360050Lightweight, compact and

easy-to-use, lap timer fea-tures single button operation. Unit indicates lap number ev-ery lap, while 250-lap memory stores laps cumulatively up to one hour in length for later recall. Serial output allows send-ing lap times to a printer, computer or data logger. Powered by a standard, 9-volt battery.

Test EquipmentIntercomp is the world leader

in high performance test equip-ment with components to meet the needs of every racer.

Shock Dynamometer INT102062-S

Compare and evaluate shock absorbers easily. The dual display unit is adjustable for 1.0", 1.5", 2.00" or 2.25" strokes and shows compression, rebound, speed, time and temperature. Fixed speed motor unit is compatible with Windows 98, NT, 2000 and XP. Software is included.

Coil-Over Spring Tester INT100063

• Digital Height/Force Readout• Check Coil-Over Rates, Coil Bind, Rod Pressure & Bump Stops• Portable

Coil Spring Tester INT100059

• Digital Height/Force Read out• 5,000 lb. Capacity• Portable

Valve Spring Tester INT100058

• Digital Height/Force Read out• 1,000 lb. Capacity

Ryan Kirkendall Photo By: Tom Willavize

120 2011 OPEN WHEEL

Vapor Aerodynamic, light composite helmet's

“slippery” boundary layer keeps it stable at high speeds. Chin bar slots, adjust-able forehead vents, crown and rear exhaust vents provide comfort. Helmets meet Snell SA specifi cations and are offered in silver, white or black.

Size Silver White Black

Medium – IMP12000409 IMP12000410Large – IMP12000509 IMP12000510

X-Large – IMP12000609 IMP12000610

Draft Ultra lightweight helmet has a

“ripple effect” boundary layer and extended chin foil to aid aerody-namics. A variable density liner im-proves comfort. Helmets meet Snell SA specifi cations and are offered in silver only.

Size Draft

Medium IMP19200408Large IMP19200508

X-Large IMP19200608

Super Sport With wide eyeports and perfect fi t

and feel, the Super Sport features lightweight, hand laminated shell, slot-ted forehead vents and slick, “narrow aero” design. Helmets meet Snell SA specifi cations and are offered in silver, white or black.


Small IMP17500308 IMP17500309 IMP17500310Medium IMP17500408 IMP17500409 IMP17500410

Large IMP17500508 IMP17500509 IMP17500510X-Large IMP17500608 IMP17500609 IMP17500610

ChampThe Champ’s radical chin bar covers

the nose and mouth, acting as a breath defl ector. Large eye port provides exceptional vision while, Gray Mat-ter helmet liner, extended chin foil, adjustable forehead, crown and rear exhaust vents contribute to comfort. Meets Snell SA specifi cations. Offered in silver, white or black.




Spider The Spider's advanced, WEB air in-duction system offers superior cooling and anti-air contamination qualities. Snell SA approved helmet has forti-fi ed speed channels to direct air fl ow across the shield, chinbar and nose/mouth area. Available in silver, white, black and fl at black, helmet includes HANS anchor and .125" clear shield.

Size Silver White Black Flat Black

Small IMP19400308 IMP19400309 IMP19400310 IMP19400312Medium IMP19400408 IMP19400409 IMP19400410 IMP19400412

Large IMP19400508 IMP19400509 IMP19400510 IMP19400512X-Large IMP19400608 IMP19400609 IMP19400610 IMP19400612

ChargerA unique wrap-around eye port gives

a wide angle view. The liner has , Gray Matter helmet liner, for maxi-mum comfort and safety. An adjust-able chin bar and forehead, crown and rear vents offer comfort. The Super Charger has a top mounted fresh air port. Helmets meet Snell SA specifi cations and are offered in silver, white or black.




Mini Vapor And Mini Champ

Designed for the continuously grow-ing 5-10 year old racer. Lightweight, aerodynamic helmets have Quick Fit Inserts to provide room for growth all the way to an adult size. Gray Matter helmet liner eases fi tting and re-fi tting. Approved by QMA, WKA, and IKF. Offered in silver only.Part No. DescriptionIMP11300308 ............ Mini VaporIMP11400308 ............ Mini Champ

Wizard Thrifty, full face helmet is de-

signed specifi cally for the entry level racer. Manufactured in the USA from a lightweight composite, the Wizard includes an extra wide eyeport for exceptional vision. Meets Snell SA2010 specifi cations. White or fl at black.

Size White Flat Black

X-Small IMP14500209 IMP14500212Small IMP14500309 IMP14500312

Medium IMP14500409 IMP14500412Large IMP14500509 IMP14500512

X-Large IMP14500609 IMP14500612

Mini ChampMini Vapor

1212011 OPEN WHEEL

Helmet And Gear BagsBlack nylon bags bear the Impact Racing

logo and are available in two sizes. Extra large Gear Bag is 27" long x 12" wide x 11" deep with adjustable shoulder straps.Part No. DescriptionIMP71000910 ............ Helmet BagIMP72000910 ............ Gear Bag

Helmet Support IMP74500010High density foam Support increases

in resistance the more it is compressed. Available in black only, support has an adjustable hook and loop closure. Meets SFI specifi cations.

Helmet Dryer IMP10000009Specialized dryer utilizes a single

speed, low amp fan that removes mois-ture from helmet, improving comfort and eliminating odor.

Breath Defl ector IMP10000012

Fits in closed face helmets and helps prevent shield fogging.

Replacement Helmet Pivot Kit IMP10000000

Replacement Helmet Shields

Model Clear Light Smoke Dark Smoke Hi-Def. Amber Iridium Yellow Iridium BlueVapor/Charger/Draft IMP12100901 IMP12100902 IMP12100903 IMP12100904 IMP12100905 IMP12100906

Champ/Nitro IMP13100901 IMP13100902 IMP13100903 IMP13100904 IMP13100905 IMP13100906Air Draft/Super Sport/Spider IMP19300901 IMP19300902 IMP19300903 IMP19300904 IMP19300905 IMP19300906

Mini Vapor IMP11300901 IMP11300902 IMP11300903 – – –Mini Champ IMP11400901 IMP11400902 IMP11400903 – – –Lil' Champ IMP11100901 IMP11100902 IMP11100903 – – –

Team OneSemi-gloss, twill Nomex double layer suits

deliver superior fi re protection. Their 360° fl oating sleeves provide unrestricted arm movement, and complement the internal elastic waistband, inset pockets, forward pant seams, wrap-around collar, dual cuffs with an in-boot liner and over the boot pant legs. Offered in silver/black only, Team Impact suits have the Impact logo across the chest. Team One suits have no logo and are available in blue, red or black. Each suit meets SFI 3-2A/5 specifi cations.

Color Medium Large X-Large XX-Large

Blue IMP21000406 IMP21000506 IMP21000606 IMP21000706Red IMP21000407 IMP21000507 IMP21000607 IMP21000707

Black IMP21000410 IMP21000510 IMP21000610 IMP21000710

The RacerImpact offers one of the best values in

American-made racing suits. The Racer is moderately priced and has maximum features. Features include soft, breath-able, matte fi nish twill Nomex III® shell, impactMAX® knit liner, expandable knit lower back panel, wide shoulders, and inset pant pocket. Black only. Meets SFI 3-2A/5 Specifi cations.

Small Medium Large X Large XX LargeOne-Piece

IMP24200310 IMP24200410 IMP24200510 IMP24200610 IMP24200710

Quarter Midget Racing Suit

The Quarter Midget racing suit is constructed of a fi re resistant shell fab-ric designed to allow for a growing racer. Meets SFI 3.2A/5 specifi cations.• 1-piece suit with plenty of extra seam

allowance to let-out as the young racer grows• Fire resistant shell lined with a cool and

comfortable liner• Built-in arm restraints• Adjustable waist belt• Vertical quilting and contrasting piping trim• Wide shoulders aids in movement• Inset pant pocket• Ribbed wrist and ankle cuffs• Tapered collar for comfort when wearing helmet and neck support

Medium Large X Large

One Piece - Double Layer, Black - Youth Size OnlyIMP21400410 IMP21400510 IMP21400610

Adult And Youth Suit Measurements

Size Height Weight Chest Waist Hips Torso Neck Inseam

AdultSmall 5'5" to 5'7" 140 to 160 37-39 31-33 37-39 63 15 31

Medium 5'7" to 5'9" 160 to 180 41-43 35-37 41-43 65 16 31Large 5'9" to 5'11" 180 to 200 45-47 39-41 45-47 68 17 32

X-Large 5'11" to 6'1" 200 to 220 49-51 43-45 49-51 71 18 33XX-Large 6'1" to 6'3" 220 to 250 53-55 47-49 53-55 72 20 33YouthMedium 4'4" to 5'0" 70 to 90 27-29 26-28 26-28 48 12 25

Large 4'11" to 5'3" 85 to 100 31-33 28-30 30-32 53 13 27X-Large 5'2" to 5'6" 95 to 110 33-35 29-31 31-33 58 14 28

122 2011 OPEN WHEEL

Recommended ComponentsFor Use With Roller Series CamsLifters ........................ ISK1241-LSHSprings ..................... ISK9315 / ISK9365Retainers .................. ISK507-STALocks ........................ ISKVL-11/32

Adjustable Guide PlatesPlates min i mize modifi cations to high-per for-

mance cyl in der heads when in take ports have been re lo cat ed. Eas i ly ad just ed inward or out-ward with grind centers for a closer setting. For more sta bil i ty, plates can be welded once fi nal ad just ments have been made. Fits SB Chevy and 90° V-6. Packaged in sets of 8 pair.Part No. DescriptionISK200-AGP .............. 5/16" Dia. PushrodsISK300-AGP .............. 3/8" Dia. Pushrods

M/T And H/T Racing ShoesOffered in M/T (Mid Top) and H/T (High

Top) versions, Impact Racing Shoes de-liver unsurpassed comfort and support with plush knit, fi re resistant interior and a velour suede exterior. Aggressive sole design provides exceptional pedal feel and dual lacing system assures excel-lent fi t. Available in black only.

Part No. SizeM/T Racing Shoes

IMP47007010 7IMP47008010 8IMP47009010 9IMP47009510 9-1/2IMP47010010 10IMP47010510 10-1/2IMP47011010 11IMP47012010 12

H/T Racing ShoesIMP48007010 7IMP48008010 8IMP48009010 9IMP48009510 9-1/2IMP48010010 10IMP48010510 10-1/2IMP48011010 11IMP48011510 11-1/2IMP48012010 12IMP48013010 13

G2/G3 Evolution Racing GlovesStandard gauntlet and cuff, comfortable

suede gloves have an adjustable quick fi t wrist closure and padded palm. G2 gloves add a padded, wrap around palm template for added comfort and abrasion resistance. Available in black/gray only.

SizeG2

Part No.G3

Part No.

Small IMP32000310 IMP33000310Medium IMP32000410 IMP33000410

Large IMP32000510 IMP33000510X-Large IMP32000610 IMP33000610

Arm RestraintsIMP75000910

Padded arm bands with webbed leashes and two adjustments for both arm circumference and leash length. Meets SFI requirements.

Wizard 5- And 6-Point Harness Systems Affordable, U.S.- made harness sys-

tems include an integrated, pull-down adjustable 3" wide lap belt and shoulder straps and are available with single (5-point) or double (6-point) 1-3/4" wide submarine belt. Offered in gray only, all harnesses are SFI 16.1 certifi ed.Part No. Description

Individual Shoulder SetsIMP59911111 ............. 5-Point Pull Down Adjust Re-

straint SystemIMP59921111 ............. 6-Point Pull Down Adjust Re-

straint System

5- And 6- Point Latch And Link Systems

Each latch and link restraint system includes choice of V-type or individual shoulder harness, latch and link lap belts. SFI 16.1 certifi ed.Part No. Description

Individual Shoulder SetsIMP51111111 ............. 5- Point Pull Down Adjust Re-

straint System

5-Point Rotary Cam Lock SystemsEach 5-point rotary cam lock system has

individual shoulder harnesses, rotary cam lock lap belts and single anti-sub belt. SFI 16.1 certifi ed.Individual Shoulder Sets

Part No. DescriptionIMP55341111 ............. Pull Down Adjust Restraint System

Anchor HardwarePart No. DescriptionIMP50000011 ............ 3-Bar AdjusterIMP50000021 ............ Bolt-In Anchor

1232011 OPEN WHEEL

Endurance Plus™ Valve SpringsTest proven for 850 racing miles, Endurance Plus Springs feature a higher alloy outer spring “plus” special processing for

increased durability. Excellent for use in sprint cars, super modifi eds, and other race cars running up to 8400 RPM. Sold in sets of 16.

Part No. Type Color Code Outer O.D./I.D. Inner O.D./I.D. Seat Pressure Open Pressure Rate Per In. Coil Bind Max Net Lift

ISK8005PLUS Dual With Damper – 1.530"/1.110" 1.005"/.730" 140 @ 1.875" 400 @ 1.275" 420 1.160" .650"ISK8205PLUS Dual With Damper – 1.530"/1.110" 1.005"/.730" 150 @ 1.900" 420 @ 1.300" 440 1.120" .650"ISK9365PLUS Dual With Damper Green/Silver Or. 1.560"/1.040" 1.145"/.740" 235 @ 1.950" 560 @ 1.270" 470 1.170" .680"ISK9375PLUS Dual With Damper Nat./Silver/Or. 1.560"/1.040" 1.145"/.740" 230 @ 1.970" 560 @ 1.290" 480 1.190" .680"ISK9385PLUS Dual With Damper Nat./Silver/Red 1.560"/1.040" 1.145"/.740" 245 @ 2.000" 600 @ 1.280" 500 1.180" .720"

Precision Tool Room™ Valve SpringsTest proven for 1000 racing miles, Isky Precision Tool Room Valve Springs feature the highest quality alloy wire and trade

secret endurance processing. Applications up to 8800 RPM. Sold in sets of 16.Part No. Type Color Code Outer O.D./I.D. Inner O.D./I.D. Seat Pressure Open Pressure Rate Per In. Coil Bind Max Net Lift

ISK295-D Single With Damper – 1.260"/.886" – 135 @ 1.775" 350 @ 1.175" 360 1.100" .600"ISK9905 Dual With Damper Gold 1.534"/1.120" 1.010"/.740" 165 @ 1.900" 450 @ 1.300" 475 1.160" .600"ISK9935 Dual Damperless Gold 1.560"/1.155" 1.153"/.820" 245 @ 1.950" 590 @ 1.250" 490 1.150" .700"ISK9945 Dual With Damper Gold 1.625"/1.175" 1.065"/.770" 250 @ 2.020" 675 @ 1.270" 550 1.180" .750"ISK9965 Dual With Damper Gold 1.560"/1.145" 1.040"/.740" 245 @ 1.950" 585 @ 1.270" 470 1.170" .680"ISK9975 Dual With Damper Gold 1.560"/1.145" 1.040"/.740" 245 @ 1.970" 585 @ 1.290" 480 1.190" .680"ISK9985 Dual With Damper Gold 1.560"/1.145" 1.040"/.740" 245 @ 2.000" 600 @ 1.300" 500 1.200" .700"ISK9995 Dual With Damper Gold 1.570"/1.145" 1.035"/.740" 250 @ 2.030" 625 @ 1.300" 510 1.200" .730"

RAD-9000 Precision Tool Room Valve SpringsIsky Precision Tool Room Valve Spring taken one step further. Springs have undergone Radial-Densifi cation (RAD), which

further modifi es the springs' physical properties. Designed for endurance oval track racing, RAD-9000 springs are sold in sets of 16.

Part No. Type Outer O.D/I.D. Inner O.D./I.D. Seat Pressure Open Pressure Rate Per In. Coil Bind Max. Net Lift

ISK9945-RAD Dual With Damper 1.625"/1.175" 1.065"/.770" 250 @ 2.020" 675 @ 1.270" 550 1.180" .750"ISK9955-RAD Dual With Damper 1.625"/1.175" 1.065"/.770" 265 @ 2.120" 700 @ 1.320" 545 1.240" .800"ISK9985-RAD Dual With Damper 1.650"/1.145" 1.040"/.740" 245 @ 2.000" 600 @ 1.300" 500 1.200" .700"ISK9988-RAD Dual With Damper 1.570"/1.145" 1.040"/.745" 250 @ 2.000" 660 @ 1.250" 550" 1.150" .750"ISK9995-RAD Dual With Damper 1.570"/1.145" 1.040"/.740" 250 @ 2.030" 625 @ 1.300" 510 1.200" .730"ISK9998-RAD Dual With Damper 1.600"/1.150" 1.040"/.745" 250 @ 2.050" 735 @ 1.250" 600 1.160" .800"ISK9999-RAD Dual With Damper 1.600"/1.150" 1.040"/.745" 250 @ 2.000" 770 @ 1.200" 650 1.150" .800"

Valve LocksLocks are machined from

4140 chrome moly bar stock and heat treated. Available in 7° and 10° styles. The “Super 7°” locks have a precisely ground outside diameter to provide a more consistent installed height and are engineered for endurance oval track applications. Sold in sets of 16 (32 pieces).Part No. Description

7° Valve LocksISKVL-11/32 .....For 11/32" Valve Stems, SB Chevy, SB Ford

“Super 7°” Valve LocksISKVL-700 ........For 11/32" Valve Stems, SB Chevy, SB FordISKVL-750 ........For 11/32" Valve Stems, +.050" Higher Installed Height, SB Chevy,

SB Ford

10° Valve LocksISKVL10-11/32 .For 11/32" Valve Stems, SB Chevy, SB Ford

Steel Valve Spring Retainers4130 chrome moly steel re tain ers are

ideal for most oval track applications. Sold in sets of 16.Part No. Spring ApplicationISK275-ST ........9315, 9365, 9365-SP, 9365, 9385, 9965, 9975, 9985, 9995ISK507-ST ........6005, 6105, 6205ISK507-STA ......6205, 8005-AISK707-ST ........205-DISK707-STA ......235-D, 295-D

Titanium Valve Spring RetainersRetainers are 20-40% stronger and signifi cantly lighter than

common steel retainers. 100% aircraft quality titanium bar stock is used in the manufacture of the retainers. Sold in sets of 16.Part No. DescriptionISK90-TI/10DEG ....... 10° Retainers, Use With 10°

Valve Locks and Springs 8005-A, 8205, 8305, 9205, 9315, 9365, 9365-SP, 9385, 9965, 9975, 9985 and 9995.

ISK91-TI .................... 7° Retainers, Use With Springs 8005-A, 8205, 8305, 9000, 9205, 9315, 9365, 9365-SP and 9385.

Endurance Plus Mechanical Roller LiftersIsky Endurance Plus Roller Lifters feature TruTrac

needle roller bearings, a non-skid textured surface, pre-mium 4340 steel pins, and “parabolic” profi le, crowned outer bearing races for long, trouble-free life. Sold in sets of 16.Part No. DescriptionISK1241-LO-150 ....... SB Chevrolet 262-400, .150" Offset,

Steel Body With Aluminum TopISK1241-LO-185 ....... SB Chevrolet 262-400, .185" Offset, Steel Body With

Alum. TopISK1241-LSH ............ SB Chevrolet 262-400, Centerline, Steel Body With Alum. Top

Rev-Lube ISKRL-100An assembly lubricant used during hydraulic

or solid camshaft “break-in”, original formula Rev-Lube uses Moly-Sulphide with organic and synthetic polymers to prevent “dry start-up”. Sold in 1 lb. container.

124 2011 OPEN WHEEL

Fuel Cell Tip Over ValvePrevents fuel spillage in the event of a roll over.

Part No. DescriptionJAZ834-006-11 .......... -6AN Tip Over ValveJAZ834-008-11 .......... -8AN Tip Over Valve

Fast Flow Fuel Cell FittingsFully radiused, fast fl ow fuel cell fi ttings include bulkhead

nuts and poly washers. Poly washers are also available separately.

SizeFuel Cell Fitting

Part No.Poly Washer

Part No.

-6AN JAZ832-106-11 JAZ850-506-04-8AN JAZ832-108-11 JAZ850-508-04

-10AN JAZ832-110-11 JAZ850-510-04-12AN JAZ832-112-11 JAZ850-512-04

Fuel Cell Components Part No. DescriptionJAZ305-051-03 ...........Aluminum Bat Wing Pick-Up, -8ANJAZ305-052-03 ...........Aluminum Bat Wing Pick-Up, -10AN

Fuel FunnelsStandard Triangular JAZ550-014-06

14" triangular shape allows easy fi lling against a bulk head. 3-step spout may be cut off for different rates of fl ow. 17" long. Accepts fi lter JAZ500-000-01.

Large Triangular JAZ550-016-06

16" triangular funnel is similar to the stan dard funnel, but with a larger capacity and a tapered spout for dif-ferent fl ow rates. 22" long. Accepts fi lter JAZ500-000-01.

JAZ305-051-03

Go Deep JAZ560-014-06

Ideal for automatic transmissions, 7" x 14" funnel has a built-in handle, anti-splash ring and 30" long, tapered spout. Accepts fi lter JAZ500-000-01.

Filter Insert JAZ500-000-01

60-micron stainless steel screen is easily re moved for cleaning. O-ring is set into a molded-in groove to provide a tight seal. Fits above funnels.

SFI-Approved Roll Bar PaddingAdhesive backed roll bar padding easily at-

taches to roll bar tubing and meets SFI 45.1 specifi cations Available in 3 ft. lengths and 1/2" or 5/8" thicknesses.

DescriptionBlack

Part No.

1/2" Thick Roll Bar Padding JAZ690-003-015/8" Thick Roll Bar Padding JAZ690-007-01

Valve Train TraysLightweight trays are perfect for

keeping valvetrain components organized during engine tear down. Valve spring tray holds springs, valve locks and will accept the largest valves available. Rocker arm tray holds push-rods, lifters, poly locks, spark plugs and rocker arms.Part No. DescriptionJAZ735-001-06 ......... Valve Spring TrayJAZ735-002-06 ......... Rocker Arm Tray

Engine Stand Drip Tray JAZ720-000-01

Fits most three- and four-legged en gine stands, sturdy drip tray has a deep sump to catch oil and debris. Promotes safety in the workshop and keeps the shop/garage fl oor much neater. Also handy for retrieving dropped fasteners and small parts.

SB Chevy 350/400 23° DomeHigh compression pistons are compatible with most stock,

aftermarket, and angle milled cylinder heads. Valve reliefs accommodate oversized valves and high lift cams. Requires 1/16" top, 1/16" second and 3/16" oil rings. Sold in sets of eight and include .927" x 2.750" (130 grams) wrist pins and double spiral locks.

Part No. Bore Stroke Rod Length Comp. Ratio Dome Volume350 Pistons

JEP182005 4.030" 3.750" 6.000" 13.3:1 +9.5 ccJEP182012 4.030" 3.500" 6.000" 13.1:1 +13 ccJEP182014 4.040" 3.500" 6.000" 13.2:1 +13cc

400 PistonsJEP182024 4.125" 4.000" 6.000" 13.4:1 +3 ccJEP182027 4.155" 4.000" 6.000" 13.5:1 +3 ccJEP182028 4.165" 4.000" 6.000" 13.7:1 +3ccJEP182032 4.165" 4.000" 6.000" 14.6:1 +8ccJEP182036 4.155" 3.875" 6.000" 13.2:1 +3 ccJEP182037 4.165" 3.875" 6.000" 13.3:1 +3ccJEP182038 4.125" 3.875" 6.000" 14.1:1 +8 ccJEP182041 4.155" 3.875" 6.000" 14.1:1 +8 ccJEP182042 4.165" 3.875" 6.000" 14.2:1 +8 ccJEP182053 4.125" 3.750" 6.000" 12.7:1 +3 ccJEP182058 4.125" 3.750" 6.000" 13.6:1 +8ccJEP182061 4.155" 3.750" 6.000" 13.7:1 +8 ccJEP182067 4.125" 3.500" 6.000" 13.8:1 +13ccJEP182069 4.155" 3.500" 6.000" 13.8:1 +13ccJEP207513 4.185" 4.000" 6.000" 14.8:1 +8cc

NOTE: Compression ratios are based on a 64cc combustion chamber. All of the 350 pistons fit both 3.480" and 3.500" strokes.

1252011 OPEN WHEEL

SB Chevy 350/400 23° Flat TopLow friction pistons with double-forced pin oilers and annu-

lar oil reservoirs will fi t most 23° (OEM angle) cylinder heads. Requires 1/16" top, 1/16" second and 3/16" oil rings. The pistons include .927" x 2.500" (118 grams) heavy duty wrist pins. Sold in sets of eight, with double spiral locks.

Part No. Bore Stroke Rod Length Comp. Ratio Dome Volume350 Pistons

JEP181916 4.030" 3.500" 6.000" 10.3:1 -5 ccJEP181924 4.030" 3.500" 5.700" 10.3:1 -5 cc

400 PistonsJEP194339 4.155" 4.000" 6.000" 12.3:1 -5cc

NOTES: Compression ratios are based on a 64cc combustion chamber. The 350 pistons listed above fit both 3.480" and 3.500" strokes.

SB Chevy 350 23° Flat Top Tour Series GPEngineered for up to 650 horsepower, Tour

Series fl at top pistons include wrist pins and have .043", .043" and 3mm CNC-machined ring grooves with lateral gas porting for superior ring seal. Sets of eight.

Part No. Bore Stroke Rod Length Comp. Ratio Dome Volume

JEP170692 4.030" 3.500" 6.000" 10.3:1 -5ccJEP170693 4.040" 3.500" 6.000" 10.3:1 -5cc

NOTES: Compression ratios are based on a 64cc combustion chamber. The 350 pistons listed above fit both 3.480" and 3.500" strokes.

Pro Seal Premium Race Series Piston RingsA full selection of pre-

mium Pro Seal piston rings are listed by bore size. Top compression rings are barrel faced ductile iron with a plasma moly coat-ing. Second rings are taper face cast iron with a phosphate coating. Standard or low tension oil rings are chrome plated carbon steel.

Part No. Bore Size Type Top Ring 2nd Ring Oil Ring

JEPJ100F8-4030-5 4.030" Plasma-Moly 1/16" 1/16" 3/16"JEPJ10008-4030-5* 4.030" Plasma-Moly 1/16" 1/16" 3/16"JEPJ70008-4030-5* 4.030" Plasma-Moly .043" .043" 3mmJEPJ100F8-4040-5 4.040" Plasma-Moly 1/16" 1/16" 3/16"

JEPJ70008-4040-5* 4.040" Plasma-Moly .043" .043" 3mmJEPJ10008-4040-5* 4.040" Plasma-Moly 1/16" 1/16" 3/16"JEPJ100F8-4060-5 4.060" Plasma-Moly 1/16" 1/16" 3/16"

JEPJ10008-4060-5* 4.060" Plasma-Moly 1/16" 1/16" 3/16"JEPJ70008-4060-5* 4.060" Plasma-Moly .043" .043" 3mmJEPJ100F8-4125-5 4.125" Plasma-Moly 1/16" 1/16" 3/16"

JEPJ10008-4125-5* 4.125" Plasma-Moly 1/16" 1/16" 3/16"JEPJ10008-4145-5* 4.145" Plasma-Moly 1/16" 1/16" 3/16"JEPJ100F8-4155-5 4.155" Plasma-Moly 1/16" 1/16" 3/16"

JEPJ10008-4155-5* 4.155" Plasma-Moly 1/16" 1/16" 3/16"* Low tension oil rings.

Description Size

200 SeriesSocket

Part No.Plug

Part No.

300 SeriesSocket

Part No.Plug

Part No.

500 SeriesSocket

Part No.Plug

Part No. Straight Reusable Nut Hose End -6AN JFT21606J JFT22606J JFT31606J JFT32606J – –Straight Reusable Nut Hose End -8AN – – JFT31608J JFT32608J JFT51608J JFT52608JStraight Reusable Nut Hose End -10AN – – – – JFT51610J –Straight Reusable Nut Hose End -12AN – – – – JFT51612J –

45° Reusable Nut Hose End -6AN JFT21606DJ – JFT31606DJ – – –45° Reusable Nut Hose End -8AN – – JFT31608DJ – – –45° Reusable Nut Hose End -10AN – – – – JFT51610DJ JFT52610DJ90° Reusable Nut Hose End -6AN JFT21606EJ – JFT31606EJ – – –90° Reusable Nut Hose End -8AN – – JFT31608EJ – – –90° Reusable Nut Hose End -10AN – – – – JFT51610EJ –

Straight Hose Barb -6AN JFT21506J JFT22506 – – – –Straight Female 37° Hose End -6AN – – JFT31306J JFT32306 – –Straight Female 37° Hose End -8AN – – JFT31308J JFT32308 – –Straight Female 37° Hose End -10AN – – – – JFT51310J JFT52310

Straight Male 37° Hose End -6AN – – JFT31406J JFT32406 – –Straight Male 37° Hose End -8AN – – JFT31408J JFT32408 – –Straight Male 37° Hose End -10AN – – – – JFT51410J JFT52410 Male O-Ring Boss Seal, ORB -6AN – JFT22106 – JFT32106 – –

Male O-Ring Boss Seal, ORB, Non-Valved -6AN – JFT22106A – JFT32106A – –Male O-Ring Boss Seal, ORB -8AN – – – JFT32108 – JFT52108

Male O-Ring Boss Seal, ORB, Non-Valved -8AN – – – JFT32108A – JFT52108AMale O-Ring Boss Seal, ORB -10AN – – – – – JFT52110

Male O-Ring Boss Seal, ORB, Non-Valved -10AN – – – – – JFT52110AMale O-Ring Boss Seal, ORB -12AN – – – – – JFT52112

Male O-Ring Boss Seal, ORB, Non-Valved -12AN – – – – – JFT52112AMale NPT 3/8" NPT – – – JFT32806 – JFT52806Male NPT 1/2" NPT – – – – – JFT52808Male NPT 3/4" NPT – – – – – JFT52812

Quick-Connect Fluid FittingsDisconnect fi ttings in seconds. Stealth black, aluminum fi ttings resist leakage,

withstand up to 200 PSI, and can handle fuel, oil or water. Jiffy-Tite 2000, 3000, and 5000 series fi ttings each offer progressively increased fl ow and will mate with any socket within the same series. One plug and one socket are required to make a quick release con-nection. Fittings listed are valved, unless noted, and are only interchangeable with other valved fi ttings.

JFT21606J

Part No. DescriptionJFT200T1 .........Kit Includes (2) 12" Long -6AN Braided Hoses, (2) 1/4" To 1/8" NPT Reducers, (1) Plug And (1) Socket JFT200T2 .........Kit Includes (2) 12" Long -6AN Braided Hoses And (2) 1/4" To 1/8" NPT ReducersJFT200T3 .........Kit Includes (2) 45° x 1/8" NPT Elbows, (2) Plugs And (2) SocketsJFT200T4 .........Kit Includes (2) 45° x 1/4" NPT Elbows, (2) Plugs And (2) Sockets

Hose KitsSelf-sealing fi ttings allow quicker

transmission changes and may be disconnected quickly without tools.

NEW SUPPLIER

126 2011 OPEN WHEEL

XPO Synthetic Racing OilUltra-low viscosity racing oil is formulated for

qualifying, where maximum performance is re-quired. Oil has a viscosity typical of SAE 0W. 1 Qt. Bottle

Part No.(12) 1 Qt. Bottles

Part No.2.5 Gallon Jug

Part No.(2) 2.5 Gallon Jugs

Part No.

JGP00406 JGP00407 JGP00414 JGP00415

XP1 Synthetic Racing OilXP1 Synthetic Racing Oil has a viscosity typical

of SAE 5W-20. Ideal for engines where bearing clearances are less than .0025".1 Qt. Bottle




Part No.

JGP00006 JGP00007 JGP00014 JGP00015

XP2 Synthetic Racing Oil Joe Gibbs Racing XP2 Racing Oil is engineered

for high RPM racing engines with bearing clear-ances under .002", oil has a viscosity typical of SAE 0W-20. 1 Qt. Bottle




Part No.

JGP00206 JGP00207 JGP00214 JGP00215

XP3 Synthetic Racing OilSimilar to XP1 with a higher viscosity, typical of

SAE10W-30, for improved high temperature/high shear protection. Formulated for aluminum blocks and all engines with bearing clearances greater than .0025".1 Qt. Bottle




Part No.

JGP00306 JGP00307 JGP00314 JGP00315

XP4 Performance Racing OilPetroleum-based lubricant is a low cost alterna-

tive to synthetic race oils. Viscosity is typical of SAE 15W-50 and is ideal for racers who change oil after every race. Works well in engines with clearances in excess of .0025".

1 Qt. BottlePart No.

(12) 1 Qt. BottlesPart No.

2.5 Gallon JugPart No.

(2) 2.5 Gallon JugsPart No.

JGP00506 JGP00507 JGP00514 JGP00515

XP5 Semi-Synthetic Racing OilA semi-synthetic lubricant offers the added

benefi ts of high temperature shear protection and oxidation stability without the high cost of a synthetic. Viscosity is typical of SAE 20W-50. 1 Qt. Bottle




Part No.

JGP00906 JGP00907 JGP00914 JGP00915

XP6 Synthetic Racing OilA full synthetic, 15W-50 version of race proven

XP1. Oil provides outstanding cold start protec-tion and superior bearing oil fi lm thickness. Designed for aluminum blocks or applications with looser clearances, oil has a viscosity typical of SAE 15W-50.





JGP01006 JGP01007 JGP01014 JGP01015

XP7 Semi-Synthetic Racing Oil JGP01706

Combines the performance of XP3 with the economical price of XP5. Viscosity is typical of SAE 15W-40.





JGP01706 JGP01707 JGP01714 JGP01715

XP8 Petroleum Racing OilHigh zinc, petroleum formula racing oil offers

low cost protection in a non-synthetic oil. Rec-ommended for small block, fl at tappet engines and nitrous engines with clearances less than .0027". 10w-30 Petroleum Oil1 Qt. Bottle




Part No.

JGP01906 JGP01907 JGP01914 JGP01915

BR Break-In OilPetroleum-based oil has superior break-in

properties, particularly in fl at tappet engines. Lubricant promotes ring seal and protects camshaft and lifters with the highest levels of zinc and phosphorus. Offered in BR50 (SAE15W-50) and BR30 (SAE 10W-30) formulas.

Description1 Qt. Bottle




Part No.

BR30 JGP01806 JGP01807 JGP01814 JGP01815BR50 JGP00106 JGP00107 JGP00114 JGP00117

Power Steering Fluid JGP01306A full synthetic formula with exceptional high

temperature foam resistance.

Cooling System Protector JGP50030

Impurities in well water can cause rust and corrosion inside the radia-tor, block, water pump and cylinder heads which can lead to a loss of cooling system effi ciency. Cooling System Protector stops the adverse effects of hard water on these criti-cal components. Sold in a 12 oz. bottle.

1272011 OPEN WHEEL

Synthetic Gear OilFormulated for differentials

and manual transmissions, synthetic performance gear oil reduces operating temps by up to 15°F. Offered in 75W and Super Speedway 80W.

Description1 Quart Bottle


Part No.5 Gallon Pail

Part No.

Synthetic Gear Oil JGP00630 JGP00631 JGP00617Super Speedway Gear Oil JGP00830 JGP00831 JGP00817

Qualifying Gear Oil – – JGP01117

Extreme Pressure Grease JGP70030 A premium extreme pressure grease with excellent

load carrying ability. Designed for high temperature and high loads. Provides exceptional mechanical sta-bility in a NLGI #2 grease. Sold in 400gm cartridge.

Engine Assembly GreaseUnparalleled engine protection during initial

start-up when combined with BR oil. Description 1 Lb. Tub Part No. 1 Oz. Tube Part No.

Assembly Grease JGP00728 JGP00732

Automotive Degreaser JGP50010

Degreases parts and shop equip-ment. 18 oz. can.

Brake And Parts Cleaner JGP50020

Cleans quickly, dries quickly and leaves no residue. 18 oz. can.

Fuel Filler Top PlatesPerfect for your mini sprint, sprint

car or any application where you need a top plate for your fuel tank. Cap area features a raised ridge to keep dirt out of your fuel system. A high fl ow roll over vent is included. The oversize vent system ensures that your fuel system gets enough air to prevent vapor lock and is designed to meet the fuel needs of your high fuel consumption alcohol motor. Add a nut ring to use the top plate on nearly any tank or bolt it directly on your existing fuel cell bladder.Part No. DescriptionJOE13275 ........Fuel Top PlateJOE13276 ........Fuel Filler Nut PlateJOE13290 ........#10 AN Roll Over Valve

Brake Caliper Carrier JOE25786

Carrier is light and machined for strength. The black anodized fi nish matches any car. The carrier mates with all popular calipers and close tolerances keep pad wear even for effi cient braking and longer pad life.

JOE13275Mini Sprint Billet Rear Hubs, Carriers,And Rotors

Hubs have JOES quality machined fi nish, anodized and laser etched for a durable fi nish. Each edge is fully radi-used for a lightweight package. JOES Mini Sprint hubs are thick where you need it and thin where you don’t, creating a hub that is strong and light. JOES rear hubs are precision broached, so they run true on your axle creating consistent speed lap after lap. Sprocket and brake rotor carriers as well as brake rotors are also available to complete a high-quality rear brake/hub combination.Part No. DescriptionJOE25615 ........Mini Sprint Rear HubJOE25675 ........Mini Sprint Sprocket CarrierJOE25685 ........Mini Sprint Brake Rotor CarrierJOE25790 ........Mini Sprint Front Brake RotorJOE25795 ........Mini Sprint Rear Brake Rotor

Mini Sprint Billet Front HubsHubs have JOES quality machined fi nish, anodized and laser etched for a durable fi nish. JOES Mini Sprint hubs are thick where you need it and thin where you don’t, creating a hub that is strong and light. JOES Billet hubs are the perfect addition to your Mini Sprint.Part No. DescriptionJOE25605 ........Mini Sprint LF Hub With Rotor MountJOE25610 ........Mini Sprint RF Hub

Split Nut For Mini-Sprint Hub JOE25601

Split nut utilizes a cinch bolt system to se-curely lock down hub at any torque setting.

JOE25615 JOE25685 JOE25790

JOE13290

JOE13276

128 2011 OPEN WHEEL

Coil-Over Spanner WrenchesBillet aluminum wrenches

prevent knuckle injuries when adjusting coil-overs.Part No. DescriptionJOE33000 ........LongJOE33500 ........Short

24 Volt Cordless Impact Gun Kits - 3/8" and 1/2" Drives

The rubberized coating on these 24 volt cordless impact wrenches makes it easy on the hands with better grip. High torque and long lasting Prolong batteries make quick work in the shop or at the track. Fast re-charge with two 24 volt batteries means the gun is always ready to go. The 1/2 inch drive Impact Gun features JOES' Torque Glide Gear System for smooth operation and the highest torque in the industry. The 3/8" drive model makes use of tool box sockets for convenience. Specs -Torque 300 ft-lbs, 2500 rpm. -Includes carry case.Part No. DescriptionJOE32820 ........1/2" Cordless Impact WrenchJOE32830 ........3/8" Cordless Impact Wrench

Digital Durometer JOE56005 Durometer automatically records

the highest number and has an average mode to check several spots on the tire. Included in the kit is a JOES Digital Tread Depth Gauge which accurately measures tire wear for optimal camber adjust-ments. Features auto shut off and includes a carrying case.

Digital Tread Depth Gauge JOE56100 Gauge measures to

1/1000 of a inch. Get the job done quickly and accurately at a fraction of the price.

Deluxe Racing Pyrometer JOE54005

Pyrometer is covered with a rub-ber boot for protection and accu-racy. Oversize numbers are 1-1/2 inches tall and the backlight makes for easy night use. The auto shut off keeps the battery fresh. The 90 degree probe is compact to get into the fender well with ease and to fi t comfortably in the hand. Max hold feature records the highest number. A padded case is included.

Professional Infrared Pyrometers Has a rubberized surface which feels

great in your hand. Rubber corners soften impacts. Laser guided accuracy works great up to 1472° F. Measures header temps, brake temps as well as tire and track temps. Use the Data Hold feature to record for camber adjust-ments. Record the standard 3 temps per tire or record 5 temps per tire for extra precision.Part No. DescriptionJOE55010 ........IR Pyrometer Soft Grip Compact, 732° F.JOE55015 ........IR Memory Pyrometer Soft Grip, 1400° F.

Also Available:JOE56100 ........Digital Tread Depth Gauge

Lightweight Steering WheelsAluminum, 2-1/2" dish steering

wheels are drilled for lightness and shot peened to enhance grip. Part No. DescriptionJOE13513-A .....13" Dished LW Steering WheelJOE13513-B .....13" Dished LW Steering Wheel (Black)JOE13515-A .....15" Dished LW Steering WheelJOE13535-A .....15" Flat LW Steering WheelJOE13535-B .....15" Flat LW Steering Wheel,

(Black)JOE13600 ........Steering Wheel TapeJOE13650 ........Steering Wheel Pad

Aluminum Weld Fittings/BungsAre machined to exact tolerances: male fi ttings are AN

sizes and the female bungs are NPT sizes. Ideal for welding to valve covers, dry sump tanks, breather tanks, etc. Sold individually.Male AN Weld Fittings

Part No. DescriptionJOE37006 ........-6ANJOE37008 ........-8AN JOE37010 ........-10AN JOE37012 ........-12AN JOE37016 ........-16AN JOE37020 ........-20AN

Shock WorkstationSecures body and shaft of

a shock absorber to allow easier servicing. May be used in a vise or mounted perma-nently to a work bench or pit cart with the optional base.Part No. DescriptionJOE19200 ........Shock WorkstationJOE19250 ........Shock Workstation, Base OnlyJOE19075 ........Shock Wrench, Allows Penske Shock Disassembly/AssemblyJOE19300 ........Drip Cup, Catches Shock Oil When Rebuilding

Female NPT Weld Bungs

Part No. DescriptionJOE37102 ........1/8" NPTJOE37104 ........1/4" NPTJOE37106 ........3/8" NPTJOE37108 ........1/2" NPTJOE37110.........3/4" NPTJOE37112.........1" NPT

JOE55015

JOE13535-B

Electric In-Line Fuel Pumps - pit stop usaﬁ cient pump operation for systems with a return line to...

Documents

Transcript of Electric In-Line Fuel Pumps - pit stop usaﬁ cient pump operation for systems with a return line to...