ELE_Barba, Cristino January 23 2016

CV / RESUME

Cristino R. Barba

January 23, 2016

Contact – Email: [email protected]/ [email protected] Tel: M + 63.9776525873 / 0+6342.795.0002 (Res.) Address: San Carlos Street, NEVP, Gulang-gulang, Lucena City, Quezon 4301, Philippines

Electrical Engineer

Education:

Bachelor of Science in Electrical Engineering, Class ‘70, University of San Carlos, Cebu City, Philippines

MCSE - Microsoft Computer System Engineer - New York Computer Training Center, Manhattan, NY (completed course on June 2006)

A+ Technician - New York Computer Training Center, Manhattan, NY (completed course on June 2005)

Network+ Technician - New York Computer Training Center, Manhattan, NY (completed course on July 2005)

Certification / Licenses:

P.E.E. (Professional Electrical Engineer # 1334, July 3, 1979- Professional Regulation Commission of the Philippines-PRC)

A.E.E. (Assistant Electrical Engineer # 2409, Feb. 18, 1971 Professional Regulation Commission of the Philippines-PRC)

Summary: Experience in EPCM (Engineering & Design, Procurement, Estimating, Construction &

Installation, Project Management, Testing & Commissioning, Maintenance & Operations, Inspection/QA/QC) of more than 25 years in the following various projects but not limited:

Oil & Gas: Refinery Facilities: Distillation of Crude Oil, Chemical Plants, Hydro cracking, Catalytic Reforming, Desulfurization units, Alkylation, Isomerization, GOSP: Compression, Dehydration, Removing H2S, Gas Processing to Condensate, Filtration, etc. LNG Facilities: Oxygen generation

plants, nitrogen generation plants, air separation plants & hydrogen - carbon monoxide (HyCO) plants; NGL Facilities: Condensate & Water Removal, Acid

Gas Removal, Sulfur Unit, Dehydration, Sweetening Unit, Tail Gas Treating, Mercury Removal, Fractionation Train, Nitrogen Rejection, NGL Recovery; Oil Rigs-Offshore/FPSO (Floating Production Storage and Off Loading Vessel / FSO (Floating Storage and Off Loading Vessel

Petrochemical: Ammonia, Methanol, Polyurethane, benzene, polycarbonate, propylene, ethylene, etc. processing/manufacturing, production facilities

Industrial ( Generator & Motor Control -DOL/RVS/VFD/PLC, HVAC, Water Supply & Drainage Systems, Hot Water System, Boiler System, Refrigeration

System, Manufacturing, Lift System, Overhead Crane System, etc.

mailto:[email protected]/

mailto:[email protected]

CV/Resume Cristino R..Barba

of 15

Mining, Open & Underground (Copper, Gold, Bauxite, Manganese, Silver,

etc.) EPCM, maintenance and engineering support for the giant electric shovels (Paul & Harness), 120 Ton Haul packs WABCO (electric driven with dynamic braking), Rotary Drills, Conveyors including substation/distribution networks etc.

Residential/Commercial / High Rise Buildings Light & Power, HVAC, DG Sets (standby), MCC/Switchgear, Cable Tray/Conduit System, Earthing System, Standby Generation System, ATS, UPS, Batteries/Battery Charger System, Fire Alarm & Suppression Systems, Telephone & Public Address Systems, etc.

Generation, (Diesel, CGT/CCGT, Steam Power Plants, etc.), Emergency/Standby Systems/Floating Power Plants - FPP) to supply power to electrical facilities.

Substation: (Truss, Low Profile, & GIS Types)Radial, Loop/Ring, Double-Bus,

Breaker & 1/2- Schemes; Vacuum & SF6 (GIS) breakers, LV/MV/HV/EHV

Switchgears & MCC's, Transformers (Power & Distribution), Capacitors -Shunt & PFC, SVC, Coils/Reactors,etc. LV/4.16/11/13.8/34.8/36/66/69/115/132/230/400kV equipment ratings.

T&D: (OH-wooden/steel structures-monopole & truss types:13.8kV-400kV) & UG-XLPE, LPOF, HPOF for 11/13.8/34.8/36/66/69/115/132/230/400kV line ratings.

Protective Relaying / SCADA/ SOE/ preparation and/or review of SLD, Metering, Control, Relay Schedule, Relay Settings , Layout, System,

Architecture, Functional List, TCC (ETAP - Star Protection), CT's/VT's specification/calculation, etc.

Communication-Power/Interfaces (PLC, DCS, MODBUS, PROFIBUS, IEC 61850, FIELD BUS, etc.) through Fiber Optic/Serial/Cat 5 Cabling to

Switchgear & Control, LV/ Vacuum & SF6 Switchgears; Telephone & Public Address System,

Engineering & Design (FEED/SOW/DB/Proposal & Detailed Design), Preparation and Review of Technical Specifications and Data Sheets, Cable Schedule, Equipment List, Drawing List, etc.

QA/QC/Site Inspection: Documents Review & Approval (Design/Construction/FAT-Inspection Test Plan-Routine Test-Type Test, IFAT, SAT, etc.)

Construction/Installation, Project Management

Testing & Commissioning: LV/MV/HV/EHV - T&D, Substation, MCC, Switchgear (VCB, GIS, SF6, etc.), Power & Distribution Transformers,

Capacitors, SVC, PFC, Generators, Motors, Protection, UPS, Inverter, Battery/BC, etc. (refer also to this summary & specific experiences.

Decommissioning & Mothballing

HSE/LEED/NESC/OSHA/etc.: Engineering & Design safety and green requirements

Project Management: Site Construction & Installation up to commissioning.

Maintenance & Operations: Responsible for planning, coordinating and implementing the maintenance programs for electrical. Implementation of the preventive maintenance programs (PMS) for the operating plants as well as planning of routine maintenance activities, plant outages and turnarounds. Provide technical and maintenance engineering solutions to

problems regarding plant and associated electrical, instrumentation and control equipment and perform technical valuations, ensuring, quality assurance and control measures are applied. Responsible for overseeing junior E&I Engineers.


of 15

Technical Bid Evaluation (TBE)/Commercial Bid Evaluation (CBE)/

Letter of Agreement (LOA)/P.0./BQ: Preparation/Coordination/Review & approval in relation to Contractor/Vendor Prequalification, Bid and Proposal/Tender Documents, Contract/SOW, etc. for the projects involved.

Procurement: Preparation and review of L/M, Material/Equipment, P.O.'s,

Technical Evaluation for P.O., etc.

Power System Study/Modeling/ETAP 12.5 : Short Circuit/Fault Analysis, Load Flow, Motor Acceleration/Dynamic Analysis, Arch-Flash Study, Earthing, Harmonics, Star Protection, Transient including Insulation Coordination.

Hazardous Locations (NEC/NFPA: Class I, II, III)-IEC: Class 1: Zone 0, 1, 2, & Zones:20,21,22), etc., preparation & review of design/engineering per HAZOP requirements.

Fire Alarm & Detection System, Fire Suppression System (CO2, Halon1301, FM-200),

UPS, Inverter, Battery Charger, etc.

Ability to use and review various computer design soft wares/outputs such as ETAP versions 4.0, 5.5,7.0, 7.1, 11.1, 12.5; SIMARIS 5.0 & 6.0, CALCULUX, EDSA, EELS, Sag & Tension, TransCAD, AMPACITY, NEC/ELECTRICALC PRO and SAP (P.O.), Micro Station, Auto Cad, Revit, PDMS, Smart Plan, SPEL, MS Office: Word, Excel, Power Point, Access, Project, Primavera, etc..

Knowledge in American Standards (NEC/NFPA/ANSI/NEMA/UL/IEEE/etc.) and

European Standards (IEC/VDE/DIN/BS/ NFC/APM/ etc.)

Training of engineers in various fields: motor & control, testing &

commissioning, substation, T&D.

Familiar with the following Vendors for the electrical products but not limited:: ABB, SIEMENS, SCHNEIDER ELECTRIC/MERLIN GERIN/ T&D AREVA, GERIN, EATON, ALLEN BRADLEY, GE, WESTINHOUSE, MICOM/ALSTHOM, BHEL, COOPER, GEC, FUJI, HITACHI, MEIDENSHA, NISSIN, S&C, TOSHIBA, HYNDAI, PIRELLI, BICC, PRYSMIAN, NEXANS, SUMITOMO, LUCY, FURUKAWA, MITSUBISHI, SEPAM, MULTILIN, TOSHIBA, DANFOSS, THOMAS & BETTS, UNI-STRUT, LEGRAND, SILVANIA, PHILLIPS, CHALFANT, CHLORIDE, EMERSON, COOPER, HUBBEL, LEVITON, CABLOFIL, etc.

SPECIFIC EXPERIENCE: April 2014-Up to March 26, 2015 Lead Engineer Electrical Tiger Project: 20 Story High Rise Building Alabang, Muntinglupa City, Philippines FLUOR 1) Preparation of FEED and Proposal Documents. 2) Review/Checking/Supervise/Reporting for the preparation of the engineering detailed design and estimating of LM/P.O. of electrical drawings/documents for the following:

Earthing System

Lightning Protection

Lighting System

Receptacle Layout

Power Layout


of 15

Cable Trays

34.5kV Switchgear & Power Distribution

400V LV Switchgear

Protection & Metering

LV Bus Duct System

Refer to Summary at page 1 for other jobs involved but not limited.

2) Site Inspection and Review of Electrical Materials/LM for Construction. 3) Attend and coordinate through meetings with INNOLAND. 4) Training of engineers for building engineering/design, construction, testing & commissioning. October 2013-Up March 2014) Lead Engineer Electrical P & G / Hair Care & Fabric Care Projects Jakarta, Indonesia FLUOR

1) Preparation of FEED and Proposal Documents.

2) Review/Checking/Supervise/Reporting for the preparation of the engineering detailed design of electrical drawings/documents for the following:

Earthing

Lightning Protection

Lighting System (Building & Street Lighting

Cable Trays

MCC

UPS / Inverter /Batteries / BC

Motors (DOL / VFD)

Transfomers

LV/MV/HV Switchgears

PFC

Load List

Underground (20kV)

Cable Schedule

Calculation (ETAP/DIALUX/Voltage Drop MS Excel)

20/.4kV Substation (E-house)

Panel Schedule

Power & Receptacles

Permitting

3D Modeling

BOQ / LOM

3) Coordinate and attend client review/progress meetings.

4) Review/Evaluate Contractor’s Bids Request for Proposal. Including TBE, CBE, BQ, PO, LOA, etc.

5) Preparation Weekly Control Level Schedule /Staffing/ Progress Report / Bi-Weekly Engineering

Review. 6) Review Contractor's / Vendor's submittals for Pre-commissioning & Commissioning / SAT

documents and drawings.


of 15

27, 2012 -Up October 2013) Senior Electrical Design Engineer / Electrical Checker SANTOS GLNG FLUOR Train 2 (FEED/SOW)

Train 1 (EPC)

Preparation, Review & Checking of Engineering Specifications & Scope of Work for the 132/33/11/0.415kV Substation/MCC/Switchgear Single Line Drawings, Data Sheets, for the Train 2 facilities. For GLNG power supply to electrical facilities refer to Summary at page 1.

Preparation of the following Technical Specifications: 132kV Outdoor Substation, 33kV Switchgear Assemblies, 33kV Overhead Line Distribution System, Electrical Control/SCADA, Heat Tracing, HV Electric AC Motors, HV VSD/DOL/RVS for Electric AC Motors, and Well pad Outdoor Skid for Train 2.

Review (Squad checking) of ABB/VENDOR documents & drawings in relation to project EPC for the 33/11/.415kV facilities: 33/11kV Substation switch rooms (Equipment Arrangement & Layout, Switchgear/Breakers), 11/.415kV MCC’s, VSD/DOL Motor & Control, Light & Power, UPS & Battery Chargers, Fire Alarm & Suppression System, Protection & Relaying SLD & Wiring Schematics, MODBUS List, MicroSCADA, etc. for Train 1.

Preparation of PACR (Project Award Clarification Record), PDN (Project Deviation Notice), PARP (Project Award Requisition Purchase/Change Order) for Train 1.

Coordinated and hosted meetings (telecom) with other work shares and Vendors for Train 1 & Train 2.

Review & checking for all calculations in relation to ETAP, manual calculations and other related soft wares for Train 1 & 2.

Preparation/Review of Estimate/Take-off, L/M, bid documents, Spare Parts List, P.O. and Maintenance & Operations manuals/documents/drawings, etc.. of the project.

Coordinate and technical support in relation to specifications, datasheets, design criteria, and international standards for the project requirements Train 1 & 2.

Review/Evaluate Contractor’s Bids Request for Proposal. Including TBE, CBE, BQ, PO, LOA, etc.

Review and support other disciplines in Testing & Commissioning/SAT/FAT/IFAT/TT/RT of site equipment

April 27, 2012 -Up to August 27, 2012) Senior Electrical Design Engineer / Electrical Checker RIO TINTO FLUOR SIMANDOU Mining Project (FEED)

Review & Checking of 132/66/33/.42kV Single Line Drawings, MTO, Load Lists for all mining facilities: Area Services Utilities & Infrastructure, Pioneering Marine Off-Loading, In-loading & Processing, Car Dumper, Jetty & Wharf, Overland and Transfer Stations.


Preparation of 33/115kV Single Line Drawings and MTO for the Overhead Transmission Line for the Outdoor Switchyard and Underground Facilities.

Review & checking for all calculations in relation to ETAP, manual calculations and other related soft wares for the electrical calculations.

Coordinate and technical support in relation to specifications, datasheets, design criteria, and international standards for the project requirements.

Preparation/Review of L/M, bid documents, Estimate/Take-off, Spare Parts List, P.O. and Maintenance & Operations manuals/documents/drawings, etc.. of the project.


of 15

September 19, 2011-April 26, 2012) Senior Electrical Design Engineer / Electrical Checker Tasnee FLUOR Super Absorbent Polymer Project (Detailed Design)

Review & Checking of Engineering and Design Drawings, Specifications / Design Criteria / Datasheets, Vendor Drawings.

Squad Check Review for the following VENDORS: ABB (4.16kV /400V MCC/Switchgear/20MVA- 34.5/4.16kV & 4.16/.4kV Distribution Transformers, Protection, Control & Metering), AEG (UPS/Battery Chargers), SIEMENS ( 35kV Cables/Accessories & 35kV Switchgear Accessories/Protection) and SIEMENS 115/34.5kV Substation power and protection system.

Engineering Design and Technical Support for the design of the following electrical discipline: Aboveground Power Plan, Area Classification (Hazardous & Non-hazardous), Cable Tray Plan & Details, Connection Diagrams, Earthing & Lightning Protection, MCC, VFD/DOL/RVS Motors, Equipment Layout, Heat Tracing, Lighting, MCT Frames Location and Sizes, Overall Plot Plan, Wiring & Schematic Diagrams, Single Line Diagrams, Single Line & Interconnection Protection/Control/Metering Diagrams, Protection Coordination Curves (TCC), Standard Assemblies, and Underground Details.

Review and support other disciplines in Testing & Commissioning/SAT/FAT/IFAT/TT/RT of site equipment


Coordinate with the other disciplines for the Engineering Design & Squad check review activities.


September 1, 2011-September 19, 2011) Senior Electrical Design Engineer

DOW-MITSUI FLUOR Tank Farms

Project (FEED/Engineering)

Preparation of Project Preliminary Engineering & Design Lightning Protection, Cable Tray Layout & Details, Underground Layout & Details, Power & Lighting, Substation & MCC, Loading & Unloading Docking Stations of FPSO/FSO for the Project RFQ.


Provide Materials Take-Off of the above and submittal to Project Control.


Coordinate with and provide input for engineering inquiries to the project management for Houston response.

February 17, 2010-July 15, 2011 Electrical Consultant Various Residential and Commercial Projects. Self-employed in the Philippines

Provided review & approval (sealing) of Documents/drawings for Municipal\City Permits.

Testing & Commissioning of Residential & Commercial Infrastructures, Industrial, and Power Distribution within Quezon Province, Manila, and Cebu City, Philippines.

Engineering/Design, Construction/Installation, Site Inspection,


of 15

February 17, 2009-February 17, 2010 Electrical Construction Superintendent BP OIL (FEED/SOW/Engineering/Detailed Design) SAIPEM Karimun Yard Construction Project SAIPEM Indonesia The following are his responsibilities:

EPC, Construction & Project Management, Engineering/Design of all on-shore & off-shore fabrication yard 11kV/6.6kV/400V facilities.

Familiar with Electrical Software: SIMARIS Design 5.0, ETAP 5.5/7.1, Calculux, Microsoft Office, and SAP (Purchase Request).

Preparation of EPCM (SAP software) for all electrical (Oil Rig) yard facilities procurement and purchase orders for construction/installation.

Preparation/Review of Estimate/Take-off, L/M, bid documents, Spare Parts List, P.O. and Maintenance & Operations manuals/documents/drawings, etc.. of the project

Schedule and coordinate with VENDORS/Contractors for construction and procurement phases through technical meetings and site inspection to meet company standards and specifications.

Review & approve detailed design drawings including shop documents prepared by VENDORS/Contractors.

Preparation/Review of Estimate, L/M, bid documents, Spare Parts List, P.O. and Maintenance & Operations manuals/documents/drawings, etc.. of the project.

Support and assist at site to resolve problems/issues for the construction/installation project.

Supervise, Repair, troubleshooting, and maintenance of electrical facilities. Reports and prepares weekly report to the Construction Manager and Project Director.


August 13, 2007-January 2009 Senior Electrical Engineer Great Man Made River (GMMR) Project BROWN & ROOT N.A. LTD. Water Supply and Pumping Stations –Libya

(Detailed Design/Engineering/Construction/Installation)

Performed the following for the transmission/distribution lines, substations/pumping stations/on-shore/off-shore and other industrial facilities projects for GMMR and Libyan Oil & Gas companies:

(EPC) Engineering/Design/FEED jobs and supervise/inspection of all site installation/testing & commissioning of all electrical control panels, MCC, primary and secondary distribution panels, overhead / underground , transmission/distribution facilities, LV/MV/HV Switchgears (VCB/SF6), Power Transformers, MCC, SCADA, protection, control & metering for the 11kV/66kV/220kV substation/transmission/distribution facilities.


Review and approved MERLIN GERIN/AREVA T&D VENDOR engineering submittal for the pumping station substation/distribution facilities construction/shop drawings for execution as built by VINCI Projects International.


Construction, Project Inspection (QA/QC, Testing & Commissioning, EPC of all electrical facilities for the water supply system: SIRT, AL-Kadrah reservoir, Wadi Al-Bab, TAZ (Tarhunah Al-Qaryan Abu-Zayyan) projects for the 220/66/11kV transmission line, distribution, and substation projects.


of 15

Coordinate and review/approval of all commissioning and hand-over acceptance certificates to the client (GMMR).

Preparation of the Power System and Relay Coordination Studies for the project using ETAP. At the last stages of the project, he assumed the role of the overall site electrical engineer and was in charged for the completion of the entire project.

Review and check Protective Relaying Design, Relay Setting Schedule and TCC submitted by AREVA T&D and MERLIN GERIN for the 11kV Pumping Stations and 220kV breaker & ½ for various substations respectively including actual site installations.

Decommissioning & mothballing of old power plants (gas fired turbines -CGT for conversion to combined cycle gas turbines-CCGT) and substation facilities to higher voltages and capacity ratings.

January 2, 2003-February 6, 2007) Various Client Projects Self-employed States of New York and Maryland/Washington D.C. Project Involvement:

Engineering design for the lighting and power (single line diagrams, plan layouts & panel schedules, riser diagrams) in accordance with NFPA70/NEC.

Process permits through the above state municipalities for residential and commercial building installation purposes after drawings have been duly approved and signed by the licensed master electrician.

Procurement of the electrical materials and equipment as required for the project.

Construction/installation for the lighting & power for the residential and commercial buildings.

Schedule inspection from the State Municipal Electrical Inspector for approval.

Testing & commissioning after installation and turn-over to the owner.


June 30, 2000-December 12, 2002 Various Client Projects (Detailed

Design) Electrical Engineering Consultant RUDELL & ASSOCIATES New York, New York Project Involvement:

Detail Engineering for various CONEDISON of New York in relation to Upgrading of 115/400kV Substations

As-builting of various distribution network (13.8/34.5kV) and 115/400kV Substations constructed by other contractors.



Detail Engineering for the Emergency Lighting & Power & Fire Alarm & Detection System of the United Nations Office Building (High Rise) and Warehouse respectively.

Detail Engineering for the Auxiliary Power Supply (480V/13.8kV System) for the CONEDISON Power Plants at New York City

Additional installation (in series to existing DS) of 115kV Substation Disconnect Switches (Low Profile Type) to Circuit Switcher Type (S & C) at Long Island various substations.

Upgrade of UPS and DC System for Various Substation for its Communication Facilities

Final tie-in inspection & testing/commissioning of various related substation jobs.


of 15

Decommissioning and mothballing of old power plants and substations to upgrade to latest technology facilities.

June 27, 1998-December 31, 1999 Various Client Projects Senior Electrical Engineer DAR AL-RIYADH CONSULTANTS Project Involvement:

Review/Check/Approval/Supervision of the on-going Construction/Installation/testing & commissioning of the 6.9/115kV Substation Facilities (Switchgear/Cabling/Transformer/etc.) at AL-RAZI 1V METHANOL EXPANSION PLANT and AL SHARQ PETROCHEMICAL PLANT. For the electrical facilities of METHANOL plant refer to Summary at page 1.

Review/Check System One Line Diagrams (230/115/6.9kV) for the designs provided by MITSUBISHI ELCTRIC/SIEMENS for various Jubail Industrial projects by running ETAP software.

Testing & Commissioning, Witness and review Routine and Type Tests for the HV testing of the Substation Facilities for the following: AL-RAZI 1V METHANOL EXPANSION PLANT and AL SHARQ PETROCHEMICAL PLANT (230kV LPOF U/G System & 230kV breaker and a half Switching Substations.



Detail Engineering for the for 2000 MAN CAMP for King Khalid HUMANITARIAN CITY.

Engineering/Design Modification of the existing design layout for Protection & SCADA Panels at the Jubail South East 230kV Substation.

On the above project, Cristino provided technical support and solved the problem of the Protection / SCADA Panels design layout mis-alignment as provided by SIEMENS by completely modifying the design layout of the panels in question at the Substation SCADA/RELAY room. This solution was able to meet the schedule and save about $2M project additional cost.

August 11, 1997-March 31, 1998 Project Manager II MWSS & MWD TECHNOLOGICAL CONSTRUCTION GROUP, INC. Various Projects (TCGI) Makati, Philippines Project Involvement:

Detail Engineering for the AWSOP-Anggat Water Supply & Operations Plant (Control & Instrumentation Equipment for the water monitoring system) including the pumping stations.

Witness the testing & commissioning of the water supply system RTU’s in relation to the AWSOP monitoring system located at MWSS Dispatch System at Diliman Quezon City.

Coordinate and provide technical support to MWSSD MIKE LEWIS CONSULTANTS.

Reports to the Vice-President, Engineering & Construction Department.

Preparation/Review of Estimate/Take-off, L/M, bid documents, Spare Parts List, P.O. and Maintenance & Operations manuals/documents/drawings, etc. of the project

On the above project, Cristino provided technical support and solved the problem of the LV supply voltage regulator for MWSSD water dispatch & monitoring station.


of 15

October 15, 1992-May 03, 1997 Electrical Project Engineer Electrification Project of the ELECTRICITY CORPORATION. Yemen Border Riyadh, Kingdom of Saudi Arabia Project Involvement:

1. Engineering (FEED/Design) & Construction (EPC), 2. Preparation/Review of Estimate/Take-off, L/M, bid documents, Spare Parts List, P.O. and

Maintenance & Operations manuals/documents/drawings, etc.. of the project 3. Review in coordination with other disciplines the following drawings and documents submitted by

Vendors (ABB/SIEMENS/ALSTHOM etc.) for approval for the project the following but not limited:

132kV Transmission Line

33kV Sub-transmission Line

132kV GIS Switchgear ALSTHOM, ABB & SIEMENS

36kV GIS Switchgear SIEMENS & ABB

132/36kV XLPE UG cables

100 MVA 132/11kV Power Transformers

G.E. 100MVA CCGT Electrical & Instrumentation facilities & substation (Switchgear,

Power & Lighting for the Substation Power Plant Building Facilities

Transformers, MCC, 12kV Bus Duct & Accessories, etc.)

600V-LV Cables

Power Transformers

Distribution Transformers

132/36kV Primary and Secondary Protective Relaying & Metering

SCADA (RTU, Alarm List, SOE, etc.)

Communication Interfaces (RTU, Alarm List

LV Switchgear/MCC (400V)

UPS

Battery Chargers/Batteries

Electrical Calculations

4. Project Management, Site Inspection (QA/QC), Testing & Commissioning of all 132/33kV transmission (UG & OH), distribution lines, 2-100MVA CCGT (G.E.) and substation facilities (ABB/SIEMENS- GIS/132/33kV Switchgears, Transformers- Double Bus and Breaker & ½ Schemes) including SCADA/Communication and Protection systems for the electrification projects at Yemen Border for the power supplies to the oil & gas facilities for the following 132/33kV GIS substations: Al Khishl (ALSTHOM/GIS), Gizan (main substation-ABB/GIS), Ad Darb (MERLIN GERIN/GIS), Abu Arish (SIEMENS/GIS), Abha/Sabya (SIEMENS/GIS); oversees, manage, supervise, inspection of the project sites in relation to contractors engineering & design/construction/installation, project execution schedule, and preparation of reports and finding/evaluation for submittal and reporting to project manager stationed in Riyadh Saudi Arabia main office.

5. Investigates the cause and origin of failures, damages or defects in the electrical fields within substation sites, T&D (69/115/230/400kV),generation sites, industrial, residential, and commercial sites. Analyzes the failure of electrical systems, determines the cause of the accident, determines the causes or origins of fires or explosions, evaluates the quality of construction or reviews design or maintenance procedures.


of 15

6. Stays abreast of office and company policies, procedures, and practices; participates in ongoing training and development as assigned or approved to assure knowledge and skills remain current and comprehensive.

7. Witnessing/approval of FAT/IFAT/SAT/TT/RT/ITP documents/drawings for all electrical equipment (LV/MV/HV/EHV) submitted by Vendors.

8. Functions as an effective member of the team, assisting co-workers as needed and learning from colleagues and supervisors; supports the goals of the department, division, and organization; participates in special assignments and activities as required or approved; demonstrates initiative in the interest of the client and the organization.

9. Adheres to all applicable and enforcing agencies, and local laws as well as applicable regulations and standards.

10. Engineering (FEED/Design) & Construction (EPC) for T&D, Substations & E-houses, Generation - 3, 100MVA GE CCGT.

11. Project/Site Inspection (QA/QC), 12. Testing & Commissioning of all 132/33kV transmission (UG & OH), distribution lines, 2-100MVA

CCGT (G.E.) and substation facilities (ABB/SIEMENS- 400/230/132/33kV Substation/Switchgear- Double Bus and Breaker & ½ Schemes) including SCADA/Communication and Protection systems for the electrification projects at Yemen Border for the power supplies to the oil & gas facilities

November 24, 1980-October 31, 1990 Senior Electrical Engineer Saudi Consolidated Electric Company of the Eastern Province (Detailed Design/FEED) Dammam, Kingdom of Saudi Arabia Project Involvement:

Preparation of DBM-Design Basis Memorandum (FEED/SOW) which include the following but not limited: MCC's, LV/MV/HV/EHV (LV-400kV) switchgears, T&D, Substations, SVC, PF, Reactors, Transformers, Lighting & Power, Cabling, etc. for the GOSP, NGL, LNG facilities.

For the electrical facilities of the Refinery, GOSP, LNG, NGL, etc. refer to Summary at page 1.

Detailed Engineering for various T&D, Substation, and Generation Projects.

Upgrading of Abqaiq, Shedgum, and Ras Tanura GOSP Substation & Power Plant Facilities.

Decommissioning & mothballing Aindar GOSP and other ARAMCO Gas & Oil facilities.

Decommissioning & mothballing of old gas turbines for conversion to combined cycle CCGT type at several generation areas (Shedgum, Ras Tanura, Hofuf and Abqaig power plants).

Detailed Engineering & Design for the installation of SCADA/SOE transducers for the 115/230kV substation at Qaisumah Power Plant

Detailed Engineering for the 13.8/230/400kV Primary & Secondary Protection System at Ghazlan / Shedgum / Abqaiq / Hofuf Power Plant Substation Expansions including PLC Communication System Interface.

Detailed Engineering & Design and Construction/Installation Support, Procurement (P.O., TBE,CBE,BP,BQ,RFP), Testing & Commissioning, Inspection (QA/QC) for Dammam Operating Area (~2000 m² area - 4 Floor. Building Office), Hofuf Operating Area - ~2000 m² area, 4 Floor Building Office (HOA), 1 Floor Qatif Operating Area Building Office -QOA (~1000 m² area ), 1 Floor Abgaiq Operating Office ~1000 m² area and 1 Floor Ras Tanura Operating Area Office Building~1000 m² area (RTOA) for the following: Lighting & Power, Protection & Metering, HVAC/MCC Fire Alarm & Detection System, Telephone and Public Address System, Standby Generation, MCC/LV Switchgear, Cable Tray System, Cabling/Conduit System, Earthing System, etc.

Preparation of DBM (Design Basis Memorandum) and Scope of Work for Project Budget and Turnkey Contracts purposes for all substations (Dammam, Abqaig, Jubail, Hoful, Shedgum, Rastanura, etc.)

Upgrade of UPS and DC System for Various Substation for its Communication Facilities


of 15

Final tie-in inspection & testing/commissioning of various T&D. Substation, & Generation/projects.

Review and approval pre-qualification submittal of all contractors/consultants.



Training of new and young engineers for engineering & design jobs (on the job training).

On the above projects, Cristino’s primary responsibility was the preparation of various electrical and equipment drawings that includes Electrical One Line Diagrams, Elementary and Schematic Diagrams, Substation Layout, Electrical Calculations, Protection AC/DC elementary diagrams including field construction/installation inspection field jobs. The engineering department on behalf of his efforts originated the first UG 69kV/XLPE, SCADA/SOE monitoring, and Protection engineering design. January 1, 1978-October 31, 1980 Electrical Design Engineer SUBIC BAY (U.S. Naval Base located at Olongapo, Zambales, Philippines) (Detailed Design) Electrical Engineer The following responsibilities were included in retrofitting naval cargo and battle ships, power plant naval cargo/battle ships (frigates, destroyers & cruisers), barges, naval airport facilities and other facilities (power plants, substations, 13.8/4.16kV distribution projects and power centers):

Design and install electrical control panels, primary and secondary distribution panels for naval facilities infrastructures, office/satellite buildings, oil and gasoline depots and support facilities


New cabling installations on board in accordance with classification requirements

Cable penetrations, cable tray installations, cable terminations and lighting installations.

Rewiring and modifications of main ship engine control and main generator control panel. Synchronizing and load sharing of main switchboard. Provided new power and control system drawings and detailed drawings for integration with existing electrical systems.

Design & Engineering (EPC), Construction/Installation, Testing & Commissioning, Maintenance (EPCM) of the 69/13.8kV Main NPC substation including SCADA/Protection/Control & Metering.

Construction/Installation, Testing & Commissioning of all naval electrical facilities.

Detail Design of the 4.16kV, 500HP Air Compressor (ATLS COPCO) Power Supply, Cabling, Protection/Control & Metering.

June 10, 1975-December 30, 1978 Various Projects Electrical Field Engineer ATLANTIC GULF & PACIFIC (AG & P) Makati, Philippines Electrical Engineer Project Involvement:

Engineering & Construction, installation, testing & commissioning of the following projects:


of 15

1) Petrochemical facilities of SONATRACH II LNG (Bethsoua, Algiers), Refer to typical

LNG facilities for the electrical discipline jobs at page 1 under Summary.

2) Tire/rubber facilities of GOODYEAR TIRE & RUBBER (Almanza, Las Pinas, Philippines)

3) and TASECO (Ship Building Yard) Zambales, Philippines.

4) KAWAZAKI SINTERING PLANT for the KAWAZAKI client.

5) Bank of America


On the above projects, Cristino’s primary responsibility was the preparation of various electrical and equipment drawings that includes Electrical One Line Diagrams, Elementary and Schematic Diagrams, Substation Layout, Electrical Calculations, Protection AC/DC elementary diagrams including field construction/installation inspection field jobs. February 16, 1971-March 26, 1975 Electrical Engineer Atlas Consolidated & Mining Development Corporation (ACMDC) Toledo City, Cebu, Philippines Project Involvement:

Assist Senior Engineers for the detail engineering for various T&D, Substation, and Generation Projects (22.25MW Steam Power and Power Barges).

Design and install electrical control panels, primary and secondary distribution panels for building, roads, bridges and mining facilities infrastructures.

Assist Electrical Testing & Commissioning of open pit mining electrical facilities.

Maintenance & Troubleshooting of 120B Haul Packs, Rotary Drills, and Paul & Harness Shovels (electric driven).

Construction/Installation, Testing & Commissioning, Maintenance & Operations of the following facilities:

a. 69/13.8kV Power Plant Substations b. Generating substations c. Floating Power Plants-Barges (FPP) d. Switchyards e. Electric Shovels f. Rotary Drills g. Haul packs h. Conveyors i. Bull Mill Motors j. Air Compressors k. Diesel Generators l. Lighting & Power for the buildings and its facilities (street & perimeter lighting).

May 05, 1970-January 01, 1971 Maintenance Plant Technician CEBU OXYGEN & ACETYLENE CO. Mabolo, Cebu City, Philippines


of 15

Project Involvement:

Engineering, maintenance & operations of all electrical facilities for the oxygen and acetylene plants.

Specification and calculations for the motor branch protection, running protection for all DOL and Reduced Voltage Starter Motors.

Maintenance & troubleshooting for the plant and building operations.

Training:

PE 200 BMRF Aligning Profit with Risk (Aug. 7,8-2014)

PE002 OSR Certification (2011)

PE100 Project Execution Team Roles and Responsibilities (2011)

PE101 Baseline Centric Execution (2011)

PE105 Managing Project Change-Delivering to the Baseline (2011)

HSE Management System Overview – ZScAF0308 (2011)

ELE155 Electrical Design Overview for Engineers (2011)

ELE151 Introduction to Electrical Engineering at Fluor (2011)

The Basics of Delegation (2011)

ZZDVO141v2- Business Case-Global Workforce Diversity/Inclusion (2011)

Defining Global Workforce Diversity and Inclusion (2011)

QA001 Overview of the Fluor Operating System Requirements

GS161 Fluor Employee Performance Assessment Overview –(2011)

ELE169 Intergraph SmartPlant Electrical (SPEL)- Overview

ELE164 Electrical Heat Tracing Overview (2011)

Fluor Risk Management Process (2011)

HSE103 Field Assignment Safety Guidelines

Code of Business Conduct and Ethics (2011)

ENG150 Checking of Deliverables -2D Drawings (2011)

PE003 Energy & Chemicals Operating System Implementation Plan (OSIP) 2011

EST 206 What Makes the Crystal Ball Work: Estimating for Non-Estimators (2011)

QA009 Preparing the Project-Specific Activity Plan (2011)

TEAM0172 Effectively Communicating in Teams (2011)

HSE162: HSE In Design (2011)

MGMT0124 Leadership Development for Technical Professionals

Facilitating Meetings and Work Groups (2011)

ELE.166.1 Uninterruptible Power Supplies: Basic Concepts and Preliminary Planning-ELE1661 (2012)

ELE911 Engineering Activities – Relay Coordination – ELE911 (2012)

BUSWAY SYSTEM DESIGN General Electric March 15, 1981

ETAP 113 POWER SYSTEMS ENGINEERING WORKSHOP (May 15, 16, & 17, 2009)

POWER SYSTEM DESIGN & PROTECTIVE RELAYING COURSE (DELTA Power Engineering & Consulting Inc.) (April 12, 14, 2008)

PROTECTIVE RELAYING COURSE (Delta Power Engineering & Consulting Inc.) Conducted on May 11, May 14, May 28, June 4, 2011)

1st QUARTER IIEE QUEZON CHAPTER TECHNICAL SEMINARS with the following topics:

INDUSTRIAL AUTOMATION, ENERGY MANAGEMENT, MERALCO INSTALLATION STANDARDS & REQUIREMENTS, RA 9514, FIRE CODE OF THE PHILIPPINES: ROLE OF ELECTRICAL PRACTITIONERS (March 26, 2011 at SM Lucena City, Philippines)

IIEE 2nd

MID YEAR GENERAL MEMBERSHIP MEETING ON THE THEME: New Electrical Engineering Law (RA 7920): IIEE’s Key to Professional Upliftment and Social Responsibility-held on July 9-12, 1997 at the Philippine International Convention Center, Pasay City, Metro Manila, Philippines

Supervisors Multi-Course Training (June 2014 to July 2014)


of 15

Professional Associations:

Life Member, Institute of Integrated Electrical Engineers of the Philippines (IIEE)

Senior Member, Institute of Electronics & Electrical Engineers (IEEE)

Member, National Fire Protection Association (NFPA)

KIWANIS International

Member FAMILY & LIFE – Saint Ferdinand Cathedral, Lucena City , Quezon, Philippines Languages (Speak, Read & Write): Tagalog, Bahasa, English, Spanish, Arabic References

No. Name Contact Tel. No. Email Company 1 Raoul Organo +6328504451 [email protected] Fluor Daniel

Inc. 2 Salamat

Soldevilla +6328504451 [email protected] Fluor Daniel

Inc. 3 Jimmy Garcia +6328504451 [email protected] Fluor Daniel

Inc. 4 Francis Santos +6328504451 [email protected] Fluor Daniel

Inc.

ELE_Barba, Cristino January 23 2016

Documents

Transcript of ELE_Barba, Cristino January 23 2016