Elcometer duct deposit measuring system is used to Controlling ducting deposits and monitoring their...
2
DFT Fineness of Grind, Density Flow & Dip Cups Rotational Viscosity Flash Point, Impact Testers Washability & Abrasion Testers Film Applicators, Bend Testers, Gloss Thickness Gauges, Surface Profile, Wet Film Dry Film, Coating Thickness Gauges Climatic Testing, Adhesion, Pinhole Testers Porosity, Software, Dispersion, Inspection Kits Zahn Cups, Motorised Film Applicators Drying Time Recorders, Washability, Abrasion Scratch & Hardness, Elasticity & Deformation Surface Cleanliness, DOI Gloss Meters Colour, Moisture, Dewpoint Meters Cross-Hatch, Oven Recorders Surface Contamination ElcoMaster TM Elcometer Duct Deposit Measuring System www.elcometer.com ENGLAND Elcometer Limited Manchester M43 6BU Tel: +44 (0)161 371 6000 Fax: +44 (0)161 371 6010 e-mail: [email protected] FRANCE Elcometer Sarl 45430 Bou Tel: +33 (0)2 38 86 33 44 Fax: +33 (0)2 38 91 37 66 e-mail: [email protected] USA Elcometer Inc Rochester Hills Michigan 48309 Tel: +1 248 650 0500 Toll Free: 800 521 0635 Fax: +1 248 650 0501 e-mail: [email protected] GERMANY Elcometer Instruments GmbH D-73431 Aalen Tel: +49(0)7361 52806 0 Fax: +49(0)7361 52806 77 e-mail: [email protected] REPUBLIC OF SINGAPORE Elcometer (Asia) Pte Ltd Singapore 589472, Tel: +65 6462 2822 Fax: +65 6462 2860 e-mail: [email protected] BELGIUM Elcometer SA B-4681 Hermalle /s Argenteau Tel: +32 (0)4 379 96 10 Fax: +32 (0)4 374 06 03 e-mail: [email protected] JAPAN Elcometer KK Nisso Dai 23 Building, Room 804, 3-8-25, Toranomon, Minato-ku, Tokyo 105-0001 Tel: +81-3-6869-0770 Fax: +81-3-6809-1442 e-mail: [email protected] THE NETHERLANDS Elcometer NL 3584 BH Utrecht Tel: +31 (0)30 210.7005 Fax: +31 (0)30 210.6666 email: [email protected]
-
Upload
multilab-india -
Category
Technology
-
view
51 -
download
4
description
Elcometer duct deposit measuring system is used to Controlling ducting deposits and monitoring their build-up is essential to maintain hygiene standards and reduce fire risks in heating and ventilation systems Supplied in india by Multilab Chennai Product Description Controlling ducting deposits and monitoring their build-up is essential to maintain hygiene standards and reduce fire risks in heating and ventilation systems. The Elcometer 456 Duct Deposit Measuring System has been specifically designed to meet the requirements of the DTT (Deposit Thickness Test) in HVCA’s (Heating & Ventilation Contractor’s Association) Guide to Good Practice, for the measurement of dust and grease deposits within ventilation systems and kitchen ducts made of ferrous metals. By using the Elcometer 456 Ferrous Top Gauge with the specially designed probe and duct cleaning templates, readings can be taken of the deposit thickness on a specific test area, before and after cleaning. ElcoMaster™ 2.0 software, supplied as standard with the Elcometer 456 Duct Deposit Measuring System includes a template designed specifically for reporting duct deposit measurements. Part Number Description A456CDUCT Elcometer 456 Duct Deposit Measuring System Measurement Range 0 - 1500μm (0 - 60mils) Packing List Elcometer 456 Top Separate Gauge, Ferrous duct probe, duct cleaning template, Precision Foil Set 25μm, 50μm, 125μm, 250μm, 500μm, 1000μm, 2mm (x2), ElcoMaster™ 2.0 software, batteries, wrist harness, carry case and operating instructions T456CF2B Elcometer 456 Duct Probe T9913939 Duct Cleaning Template T99022255-8 Precision Foil Set: Scale 2B; 0 - 5mm (0 - 200mils) T99022255-8C Certified Precision Foil Set: Scale 2B; 0 - 5mm (0 - 200mils) T99913969 Ferrous Zero Plate T99920130 USB Bluetooth® Transmitter/Receiver
Transcript of Elcometer duct deposit measuring system is used to Controlling ducting deposits and monitoring their...
www.elcometer.com
Datasheet
D F T , Fineness of Grind, Density,
Flow Cups, Viscosity, Flash Point, Film Applicators, Washability and
Abrasion Testers, Hardness, Impact & Bend Testers, Gloss, Colour, Material Thickness
Surface Profile, Wet Film, Climatic Testing Coating Thickness Gauges, Adhesion
Pinhole Testers, Porosity Detectors, Software Dispersion, Inspection Kits, Zahn Cups, Viscosity Motorised Film Applicators, Drying Time Recorders Washability, Abrasion, Hardness, Elasticity and Deformation, Appearance, Material Thickness Surface Cleanliness, Dewpoint Meters
Wet Film Combs, Dry Film Thickness Cross-Hatch, Pinhole & Porosity, PIGs
DOI Meters, Scratch Testers Moisture, Oven Recorders
ElcoMaster™
DFT Fineness of Grind, Density Flow & Dip Cups Rotational Viscosity Flash Point, Impact Testers Washability & Abrasion Testers Film Applicators, Bend Testers, Gloss
Thickness Gauges, Surface Profile, Wet Film Dry Film, Coating Thickness Gauges
Climatic Testing, Adhesion, Pinhole Testers Porosity, Software, Dispersion, Inspection Kits
Zahn Cups, Motorised Film Applicators Drying Time Recorders, Washability, Abrasion
Scratch & Hardness, Elasticity & Deformation Surface Cleanliness, DOI Gloss Meters
Colour, Moisture, Dewpoint Meters Cross-Hatch, Oven Recorders
Surface Contamination ElcoMaster TM
Elcometer Duct Deposit Measuring System
www.elcometer.com
ENGLANDElcometer LimitedManchester M43 6BUTel: +44 (0)161 371 6000Fax: +44 (0)161 371 6010e-mail: [email protected]
FRANCEElcometer Sarl45430 BouTel: +33 (0)2 38 86 33 44Fax: +33 (0)2 38 91 37 66e-mail: [email protected]
USAElcometer IncRochester Hills Michigan 48309Tel: +1 248 650 0500Toll Free: 800 521 0635Fax: +1 248 650 0501e-mail: [email protected]
GERMANYElcometer Instruments GmbHD-73431 AalenTel: +49(0)7361 52806 0Fax: +49(0)7361 52806 77e-mail: [email protected]
REPUBLIC OF SINGAPOREElcometer (Asia) Pte LtdSingapore 589472,Tel: +65 6462 2822Fax: +65 6462 2860e-mail: [email protected]
BELGIUMElcometer SAB-4681 Hermalle /s ArgenteauTel: +32 (0)4 379 96 10Fax: +32 (0)4 374 06 03e-mail: [email protected]
JAPANElcometer KKNisso Dai 23 Building, Room 804, 3-8-25, Toranomon, Minato-ku,Tokyo 105-0001Tel: +81-3-6869-0770Fax: +81-3-6809-1442e-mail: [email protected]
THE NETHERLANDSElcometer NL3584 BH UtrechtTel: +31 (0)30 210.7005Fax: +31 (0)30 210.6666email: [email protected]
www.elcometer.com
Datasheet
Duct Deposit Measuring System
Controlling ducting deposits and monitoring their build-up is essential to maintain hygiene standards and reduce fire risks in heating and ventilation systems.
The Elcometer 456 Duct Deposit Measuring System has been specifically designed to meet the requirements of the DTT (Deposit Thickness Test) in HVCA’s (Heating & Ventilation Contractor’s Association) Guide to Good Practice, for the measurement of dust and grease deposits within ventilation systems and kitchen ducts made of ferrous metals.
By using the Elcometer 456 Ferrous Top Gauge with the specially designed probe and duct cleaning templates, readings can be taken of the deposit thickness on a specific test area, before and after cleaning.
ElcoMaster™ 2.0 software, supplied as standard with the Elcometer 456 Duct Deposit Measuring System includes a template designed specifically for reporting duct deposit measurements.
Elcometer
Technical Specification
Part Number Description Certificate
A456CDUCT Elcometer 456 Duct Deposit Measuring System ○Measurement Range 0 - 1500μm (0 - 60mils)Packing List Elcometer 456 Top Separate Gauge, Ferrous duct probe, duct cleaning template, precision foil set
25μm, 50μm, 125μm, 250μm, 500μm, 1000μm, 2mm (x2), ElcoMaster™ 2.0 software, batteries, wrist harness, carry case and operating instructions
Accessories
T456CF2B Elcometer 456 Duct ProbeT9913939 Duct Cleaning TemplateT99022255-8 Precision Foil Set: Scale 2B; 0 - 5mm (0 - 200mils)T99022255-8C Certified Precision Foil Set: Scale 2B; 0 - 5mm (0 - 200mils)T99913969 Ferrous Zero PlateT99920130 USB Bluetooth® Transmitter/Receiver
STANDARDS:
AS 2331.1.4, AS 3894.3-B, AS/NZS 1580.108.1, ASTM B 499, ASTM D 1186-B, ASTM D 1400, ASTM D 7091, ASTM E 376, ASTM G 12, BS 3900-C5-6B, BS 3900-C5-6A, BS 5411-11, BS 5411-3, BS 5599, DIN 50981, DIN 50984, ECCA T1, EN 13523-1, IMO MSC.215(82), IMO MSC.244 (83), ISO 1461, ISO 19840, ISO 2063, ISO 2360, ISO 2808-6A, ISO 2808-6B, ISO 2808-7C, ISO 2808-7D, ISO 2808-12, JIS K 5600-1-7, NF T30-124, SS 184159, SSPC PA 2, US Navy PPI 63101-000, US Navy NSI 009-32
○ Optional Calibration Certificate available.
