Elastic Buckling of Thin-Walled Structural Components with Stiffened Holes Cris Moen, Virginia Tech...
-
Upload
tristan-starnes -
Category
Documents
-
view
218 -
download
0
Transcript of Elastic Buckling of Thin-Walled Structural Components with Stiffened Holes Cris Moen, Virginia Tech...
![Page 1: Elastic Buckling of Thin-Walled Structural Components with Stiffened Holes Cris Moen, Virginia Tech Cheng Yu, University of North Texas 51st AIAA/ASME/ASCE/AHS/ASC.](https://reader035.fdocuments.us/reader035/viewer/2022070306/55182b155503469d318b4ded/html5/thumbnails/1.jpg)
Elastic Buckling of Thin-Walled Structural Components with Stiffened Holes
Cris Moen, Virginia Tech Cheng Yu, University of North Texas
51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials ConferenceMonday, April 12, 2010
![Page 2: Elastic Buckling of Thin-Walled Structural Components with Stiffened Holes Cris Moen, Virginia Tech Cheng Yu, University of North Texas 51st AIAA/ASME/ASCE/AHS/ASC.](https://reader035.fdocuments.us/reader035/viewer/2022070306/55182b155503469d318b4ded/html5/thumbnails/2.jpg)
Outline
• Where are stiffened holes used in structures?• Intro to thin-walled component design• Elastic buckling including stiffened holes:
– Global buckling– Distortional buckling– Local buckling
• Conclusions
![Page 3: Elastic Buckling of Thin-Walled Structural Components with Stiffened Holes Cris Moen, Virginia Tech Cheng Yu, University of North Texas 51st AIAA/ASME/ASCE/AHS/ASC.](https://reader035.fdocuments.us/reader035/viewer/2022070306/55182b155503469d318b4ded/html5/thumbnails/3.jpg)
Applications
Metal buildingsAerospace
Minimize weight, provide pass through access
![Page 4: Elastic Buckling of Thin-Walled Structural Components with Stiffened Holes Cris Moen, Virginia Tech Cheng Yu, University of North Texas 51st AIAA/ASME/ASCE/AHS/ASC.](https://reader035.fdocuments.us/reader035/viewer/2022070306/55182b155503469d318b4ded/html5/thumbnails/4.jpg)
Outline
• Where are stiffened holes used in structures?• Intro to thin-walled component design• Elastic buckling including stiffened holes:
– Global buckling– Distortional buckling– Local buckling
• Conclusions
![Page 5: Elastic Buckling of Thin-Walled Structural Components with Stiffened Holes Cris Moen, Virginia Tech Cheng Yu, University of North Texas 51st AIAA/ASME/ASCE/AHS/ASC.](https://reader035.fdocuments.us/reader035/viewer/2022070306/55182b155503469d318b4ded/html5/thumbnails/5.jpg)
Elastic buckling curve
Buckling modes (and loads) are revealed…
Pcrl
PcrdPcre
Schafer, B. W., and Ádàny, S. "Buckling analysis of cold-formed steel members using CUFSM: conventional and constrained finite strip methods," Eighteenth International Specialty Conference on Cold-Formed Steel Structures. Orlando, FL, 2006.
![Page 6: Elastic Buckling of Thin-Walled Structural Components with Stiffened Holes Cris Moen, Virginia Tech Cheng Yu, University of North Texas 51st AIAA/ASME/ASCE/AHS/ASC.](https://reader035.fdocuments.us/reader035/viewer/2022070306/55182b155503469d318b4ded/html5/thumbnails/6.jpg)
Thin-walled buckling modes
Mode shapes and buckled half-wavelengths are consistent with elastic buckling curve
Moen, C. D., and Schafer, B. W. "Experiments on cold-formed steel columns with holes," Thin-Walled Structures Vol. 46, 2008, pp. 1164-11
![Page 7: Elastic Buckling of Thin-Walled Structural Components with Stiffened Holes Cris Moen, Virginia Tech Cheng Yu, University of North Texas 51st AIAA/ASME/ASCE/AHS/ASC.](https://reader035.fdocuments.us/reader035/viewer/2022070306/55182b155503469d318b4ded/html5/thumbnails/7.jpg)
Design curvesUse elastic buckling loads with design curves to predict capacity.
For thin-walled members, we have design curves for local and global instability limit states.
![Page 8: Elastic Buckling of Thin-Walled Structural Components with Stiffened Holes Cris Moen, Virginia Tech Cheng Yu, University of North Texas 51st AIAA/ASME/ASCE/AHS/ASC.](https://reader035.fdocuments.us/reader035/viewer/2022070306/55182b155503469d318b4ded/html5/thumbnails/8.jpg)
Design curvesMembers with holes – calculate elastic buckling properties including holes and use similar design curves
Moen, C. D., and Schafer, B. W. "Direct Strength Design of Cold-Formed Steel Columns with Holes," 2010 Annual Technical Session and Meeting, Structural Stability Research Council. Orlando, FL, 2010.
![Page 9: Elastic Buckling of Thin-Walled Structural Components with Stiffened Holes Cris Moen, Virginia Tech Cheng Yu, University of North Texas 51st AIAA/ASME/ASCE/AHS/ASC.](https://reader035.fdocuments.us/reader035/viewer/2022070306/55182b155503469d318b4ded/html5/thumbnails/9.jpg)
Elastic buckling curve
Shell finite element eigen-buckling analysis is slightly painful but needed for members with holes.
![Page 10: Elastic Buckling of Thin-Walled Structural Components with Stiffened Holes Cris Moen, Virginia Tech Cheng Yu, University of North Texas 51st AIAA/ASME/ASCE/AHS/ASC.](https://reader035.fdocuments.us/reader035/viewer/2022070306/55182b155503469d318b4ded/html5/thumbnails/10.jpg)
Motivation
Simplified methods were recently developed for predicting the elastic buckling properties of thin-walled structural components with unstiffened holes.
Moen, C. D., and Schafer, B. W. "Elastic buckling of cold-formed steel columns and beams with holes," Engineering Structures Vol. 31, No. 12, 2009, pp. 2812-2824.
Are these methods viable for stiffened holes?
![Page 11: Elastic Buckling of Thin-Walled Structural Components with Stiffened Holes Cris Moen, Virginia Tech Cheng Yu, University of North Texas 51st AIAA/ASME/ASCE/AHS/ASC.](https://reader035.fdocuments.us/reader035/viewer/2022070306/55182b155503469d318b4ded/html5/thumbnails/11.jpg)
Outline
• Where are stiffened holes used in structures?• Intro to thin-walled component design• Elastic buckling including stiffened holes:
– Global buckling– Distortional buckling– Local buckling
• Conclusions
![Page 12: Elastic Buckling of Thin-Walled Structural Components with Stiffened Holes Cris Moen, Virginia Tech Cheng Yu, University of North Texas 51st AIAA/ASME/ASCE/AHS/ASC.](https://reader035.fdocuments.us/reader035/viewer/2022070306/55182b155503469d318b4ded/html5/thumbnails/12.jpg)
Global buckling
Approximate the critical elastic buckling loads for columns and beams with holes using a weighted average hand calculation.
![Page 13: Elastic Buckling of Thin-Walled Structural Components with Stiffened Holes Cris Moen, Virginia Tech Cheng Yu, University of North Texas 51st AIAA/ASME/ASCE/AHS/ASC.](https://reader035.fdocuments.us/reader035/viewer/2022070306/55182b155503469d318b4ded/html5/thumbnails/13.jpg)
0WU
dxdx
xvdxEIU
L
0
2
2
2 )()(
2
1
dxdx
xdvPW
L
0
2)(
2
1
v
Flexural buckling
Rayleigh-Ritz Energy Solution:
![Page 14: Elastic Buckling of Thin-Walled Structural Components with Stiffened Holes Cris Moen, Virginia Tech Cheng Yu, University of North Texas 51st AIAA/ASME/ASCE/AHS/ASC.](https://reader035.fdocuments.us/reader035/viewer/2022070306/55182b155503469d318b4ded/html5/thumbnails/14.jpg)
L
IITLILI
L
EP netgnetnetggcre 2
2
L
LILI
L
EP netnetggcre 2
2
L
L
L
cLT jhole
n
j
j ,
1
sin2
cos2
Weighted average of moment of inertia!
Holes at the midlength of a column reduce Pcre the most
Flexural buckling
Evenly spaced holes
Arbitrary hole spacing
The solution is a “weighted average” equation for Euler buckling.
![Page 15: Elastic Buckling of Thin-Walled Structural Components with Stiffened Holes Cris Moen, Virginia Tech Cheng Yu, University of North Texas 51st AIAA/ASME/ASCE/AHS/ASC.](https://reader035.fdocuments.us/reader035/viewer/2022070306/55182b155503469d318b4ded/html5/thumbnails/15.jpg)
Global buckling
Hole spacing is 500 mm.Column length is 2500 mm.Hole diameter is varied from 0.1 to 0.7 of H.
Q=0.12hholeYu, C. "Behavior and design of cold-formed steel joists with edge stiffened perforations," 2007 Annual Stability Conference, April 18, 2007 - April 21, 2007. Structural Stability Research Council, New Orleans, LA, United States, 2007, pp. 239-258.
![Page 16: Elastic Buckling of Thin-Walled Structural Components with Stiffened Holes Cris Moen, Virginia Tech Cheng Yu, University of North Texas 51st AIAA/ASME/ASCE/AHS/ASC.](https://reader035.fdocuments.us/reader035/viewer/2022070306/55182b155503469d318b4ded/html5/thumbnails/16.jpg)
For evenly spaced holes:
Holes at the midlength of a column reduce Pcre the most
Flexural buckling
0.10 0.30 0.50 0.70 m s
Pcre,ABAQUS*/Pcre,no hole (stiffened) 0.94 0.89 0.88 0.82 --- ---
Pcre,ABAQUS*/Pcre, weighted av erage (stiffened) 0.94 0.90 0.92 0.91 0.92** 0.02
Pcre,ABAQUS*/Pcre,no hole (unstiffened)*** 0.93 0.91 0.88 0.79
ABAQUS-to-predicted statistics
Column weak axis flexural buckling
h hole /HBuckling Mode Comparison
* ABAQUS results are systematically 6% lower than the Euler buckling solution. The difference is caused by the assumption of a rigid cross-section in the classical stability equations.
![Page 17: Elastic Buckling of Thin-Walled Structural Components with Stiffened Holes Cris Moen, Virginia Tech Cheng Yu, University of North Texas 51st AIAA/ASME/ASCE/AHS/ASC.](https://reader035.fdocuments.us/reader035/viewer/2022070306/55182b155503469d318b4ded/html5/thumbnails/17.jpg)
0r
yPPP
r
xPPP
PPPPPP
2o
2o
2cre
crecrex2o
2o
2cre
crecrey
crecrecrecrexcrecrey
J St. Venant torsionCw Warping torsion
YES! Need to investigate…
Timoshenko and Gere (1961), Chajes (1974)
Torsional bucklingThe “weighted average” approximation can be extended to the classical cubic column buckling equation…
Cw does not follow the weighted average approximation!
and the equation for lateral torsional buckling of beams with holes.
2
2
LECGJEIM wycre
![Page 18: Elastic Buckling of Thin-Walled Structural Components with Stiffened Holes Cris Moen, Virginia Tech Cheng Yu, University of North Texas 51st AIAA/ASME/ASCE/AHS/ASC.](https://reader035.fdocuments.us/reader035/viewer/2022070306/55182b155503469d318b4ded/html5/thumbnails/18.jpg)
A comment on warping torsionHoles prevent warping torsion resistance from developing along the length of a member. Buckling modes dominated by torsion are especially sensitive to the presence of holes.
![Page 19: Elastic Buckling of Thin-Walled Structural Components with Stiffened Holes Cris Moen, Virginia Tech Cheng Yu, University of North Texas 51st AIAA/ASME/ASCE/AHS/ASC.](https://reader035.fdocuments.us/reader035/viewer/2022070306/55182b155503469d318b4ded/html5/thumbnails/19.jpg)
Outline
• Where are stiffened holes used in structures?• Intro to thin-walled component design• Elastic buckling including stiffened holes:
– Global buckling– Distortional buckling– Local buckling
• Conclusions
![Page 20: Elastic Buckling of Thin-Walled Structural Components with Stiffened Holes Cris Moen, Virginia Tech Cheng Yu, University of North Texas 51st AIAA/ASME/ASCE/AHS/ASC.](https://reader035.fdocuments.us/reader035/viewer/2022070306/55182b155503469d318b4ded/html5/thumbnails/20.jpg)
For evenly spaced holes:
Holes at the midlength of a column reduce Pcre the most
Distortional buckling
The web provides rotational restraint to the flange. How does a stiffened hole affect this restraint?
![Page 21: Elastic Buckling of Thin-Walled Structural Components with Stiffened Holes Cris Moen, Virginia Tech Cheng Yu, University of North Texas 51st AIAA/ASME/ASCE/AHS/ASC.](https://reader035.fdocuments.us/reader035/viewer/2022070306/55182b155503469d318b4ded/html5/thumbnails/21.jpg)
For evenly spaced holes:
Holes at the midlength of a column reduce Pcre the most
Distortional buckling
Study the hole influence within one distortional buckling half-wave.
![Page 22: Elastic Buckling of Thin-Walled Structural Components with Stiffened Holes Cris Moen, Virginia Tech Cheng Yu, University of North Texas 51st AIAA/ASME/ASCE/AHS/ASC.](https://reader035.fdocuments.us/reader035/viewer/2022070306/55182b155503469d318b4ded/html5/thumbnails/22.jpg)
For evenly spaced holes:
Holes at the midlength of a column reduce Pcre the most
Distortional buckling
Edge stiffener increased web bending stiffness
![Page 23: Elastic Buckling of Thin-Walled Structural Components with Stiffened Holes Cris Moen, Virginia Tech Cheng Yu, University of North Texas 51st AIAA/ASME/ASCE/AHS/ASC.](https://reader035.fdocuments.us/reader035/viewer/2022070306/55182b155503469d318b4ded/html5/thumbnails/23.jpg)
For evenly spaced holes:
Holes at the midlength of a column reduce Pcre the most
Distortional bucklingHole spacing is 560 mm.Column length is 2794 mm.Q=0.12hhole
![Page 24: Elastic Buckling of Thin-Walled Structural Components with Stiffened Holes Cris Moen, Virginia Tech Cheng Yu, University of North Texas 51st AIAA/ASME/ASCE/AHS/ASC.](https://reader035.fdocuments.us/reader035/viewer/2022070306/55182b155503469d318b4ded/html5/thumbnails/24.jpg)
Outline
• Where are stiffened holes used in structures?• Intro to thin-walled component design• Elastic buckling including stiffened holes:
– Global buckling– Distortional buckling– Local buckling
• Conclusions
![Page 25: Elastic Buckling of Thin-Walled Structural Components with Stiffened Holes Cris Moen, Virginia Tech Cheng Yu, University of North Texas 51st AIAA/ASME/ASCE/AHS/ASC.](https://reader035.fdocuments.us/reader035/viewer/2022070306/55182b155503469d318b4ded/html5/thumbnails/25.jpg)
For evenly spaced holes:
Local buckling
When an unstiffened hole is added, deformation concentrates at the hole.
Elastic buckling stress is reduced by the presence of a hole.
![Page 26: Elastic Buckling of Thin-Walled Structural Components with Stiffened Holes Cris Moen, Virginia Tech Cheng Yu, University of North Texas 51st AIAA/ASME/ASCE/AHS/ASC.](https://reader035.fdocuments.us/reader035/viewer/2022070306/55182b155503469d318b4ded/html5/thumbnails/26.jpg)
For evenly spaced holes:
Local bucklingDepending upon the hole size and plate geometry, buckling may occur away from a hole.
Moen, C. D., and Schafer, B. W. "Elastic buckling of thin plates with holes in compression or bending," Thin-Walled Structures Vol. 47, No. 12, 2009, pp. 1597-1607.
Elastic buckling stress is unaffected by the hole.
![Page 27: Elastic Buckling of Thin-Walled Structural Components with Stiffened Holes Cris Moen, Virginia Tech Cheng Yu, University of North Texas 51st AIAA/ASME/ASCE/AHS/ASC.](https://reader035.fdocuments.us/reader035/viewer/2022070306/55182b155503469d318b4ded/html5/thumbnails/27.jpg)
For evenly spaced holes:
Local buckling
Prediction method – assume buckling occurs at a hole or away from (between) holes.
Pcrl=min(Pcrlnh, Pcrlh)
Buckling loads be calculated with a finite strip analysis at the gross section and the net cross section.
![Page 28: Elastic Buckling of Thin-Walled Structural Components with Stiffened Holes Cris Moen, Virginia Tech Cheng Yu, University of North Texas 51st AIAA/ASME/ASCE/AHS/ASC.](https://reader035.fdocuments.us/reader035/viewer/2022070306/55182b155503469d318b4ded/html5/thumbnails/28.jpg)
For evenly spaced holes:
Holes at the midlength of a column reduce Pcre the most
Local buckling
An important benefit of stiffened holes!
![Page 29: Elastic Buckling of Thin-Walled Structural Components with Stiffened Holes Cris Moen, Virginia Tech Cheng Yu, University of North Texas 51st AIAA/ASME/ASCE/AHS/ASC.](https://reader035.fdocuments.us/reader035/viewer/2022070306/55182b155503469d318b4ded/html5/thumbnails/29.jpg)
For evenly spaced holes:
Local buckling
Wavelength stiffening occurs when holes are spaced closely together.
![Page 30: Elastic Buckling of Thin-Walled Structural Components with Stiffened Holes Cris Moen, Virginia Tech Cheng Yu, University of North Texas 51st AIAA/ASME/ASCE/AHS/ASC.](https://reader035.fdocuments.us/reader035/viewer/2022070306/55182b155503469d318b4ded/html5/thumbnails/30.jpg)
For evenly spaced holes:
Holes at the midlength of a column reduce Pcre the most
Conclusions
•Simplified elastic buckling prediction methods outlined in Moen and Schafer (2009) are viable for stiffened holes (more validation work is needed for other cross-sections and hole sizes, shapes, spacings,…)
•Edge stiffeners did not improve global buckling loads because I, J, and Cw all decreased due to the presence of holes
•Distortional buckling loads were minimally affected by the presence of stiffened holes, although new hole modes with half waves forming between holes were observed
•Edge stiffeners prevented local buckling at holes, and closely
spaced holes boosted the critical elastic buckling load.
![Page 31: Elastic Buckling of Thin-Walled Structural Components with Stiffened Holes Cris Moen, Virginia Tech Cheng Yu, University of North Texas 51st AIAA/ASME/ASCE/AHS/ASC.](https://reader035.fdocuments.us/reader035/viewer/2022070306/55182b155503469d318b4ded/html5/thumbnails/31.jpg)
Thank you for your attention!
This presentation can be downloaded at www.moen.cee.vt.edu
![Page 32: Elastic Buckling of Thin-Walled Structural Components with Stiffened Holes Cris Moen, Virginia Tech Cheng Yu, University of North Texas 51st AIAA/ASME/ASCE/AHS/ASC.](https://reader035.fdocuments.us/reader035/viewer/2022070306/55182b155503469d318b4ded/html5/thumbnails/32.jpg)
Engineering tools
![Page 33: Elastic Buckling of Thin-Walled Structural Components with Stiffened Holes Cris Moen, Virginia Tech Cheng Yu, University of North Texas 51st AIAA/ASME/ASCE/AHS/ASC.](https://reader035.fdocuments.us/reader035/viewer/2022070306/55182b155503469d318b4ded/html5/thumbnails/33.jpg)
Thin-walled component design
• Thin-walled components are susceptible to failure caused by cross-section and/or global instabilities.
• Elastic buckling properties are useful for predicting structural capacity.
• How do holes influence elastic buckling?• Can edge stiffeners improve performance
and how can we quantify this improvement?