EKS SERIES AXIAL and MIXED FLOW PUMPS · 2009-10-04 · EKS SERIES AXIAL and MIXED FLOW PUMPS...
1
SERIES AXIAL and MIXED FLOW PUMPS EKS TECHNICAL SPECIFICATIONS: EKS - E/K series pumps are axial and mixed flow pumps with high capacities and low discharge heads, they are vertical suspended and in column pipe construction APPLICATIONS: Potable water supply Large scale irrigation systems with high flow rates and cooling water pumping in industrial plants. De-watering MATERIALS: Casing, Diffuser : Cast iron (EN-JL 1040) Impeller : Stainless steel Shaft : Carbon steel (1.0501) Column pipe : (1.0120) sheet metal construction Intermediate bearings : Grease lubricated bronze or clean water lubricated rubber PERFORMANCE DATA 140 - 5000 1 - 50 250 - 1200 Capacity (L/s) Discharge Head (m) Column Pipe Diameter (mm) (56) Part 10
Transcript of EKS SERIES AXIAL and MIXED FLOW PUMPS · 2009-10-04 · EKS SERIES AXIAL and MIXED FLOW PUMPS...
SERIES AXIAL and MIXED FLOW PUMPSEKS
TECHNICAL SPECIFICATIONS:EKS - E/K series pumps are axial and mixed flow pumps with high capacitiesand low discharge heads, they are vertical suspended and in column pipeconstruction
APPLICATIONS:Potable water supplyLarge scale irrigation systems with high flow rates and cooling water pumpingin industrial plants.De-watering
MATERIALS:Casing, Diffuser : Cast iron (EN-JL 1040)Impeller : Stainless steelShaft : Carbon steel (1.0501)Column pipe : (1.0120) sheet metal constructionIntermediate bearings : Grease lubricated bronze or clean water lubricated rubber
PERFORMANCE DATA
140 - 5000
1 - 50
250 - 1200
Capacity (L/s)
Discharge Head (m)
Column Pipe Diameter (mm)
(56)
Part 10