Specifi cations are subject to change without notice.

www.aldabra.it

Professional modular linear lighting system for signal lighting suitable for indoor and outdoor settings, permanent im-

mersion down to 30 meters (98,42 ft).

Body fi nished aluminium with opaque and transparent resin. All the materials are suitable for use in swimming pools,

fountains and with salt water. UV resistance of all materials.

PRODUCT DESCRIPTION:

Materials Aluminium ; Resins

Finishes Anodized Aluminium

Power Supply 24 Vdc constant voltage

Power 8 W/m

Light Source Mid-Power LED 140-180 lm/W

Pitch 20 mm (0,787”)

Color Temperature 2700 K ; 3000 K ; 3300 K ; 3700 K ; 5200 K

Ra > 80

Chromatic Selection Mac-Adam 3-step

Lifetime > 50000 h (TM21)

Optics Transparent or Opal diffuser

Tc metal body < 90 °C (194 °F)

Ta operating temperature - 30 ÷ 50 °C (-22 ÷ 122 °F)

Ts surface temperature ≤ 65 °C (149 °F)

Functions On/Off ; dimmable

CableAWM style 20233 2x0,75mm²(AWG18) Red;Black+1x0,5mm²(AWG20) Violet L. 1 m (3,28 ft).

Weigth 800 g/m (8,603 oz/ft)

Walk over up to 500 Kg (1102,3 Lbs)

Static load resistance 2000 Kg (4409,2 Lbs)

Installations Ground, Wall ,ceiling recessed - immersion

Norms 60598-1 ; 60598-2 and its parts

T E C H N I C A L S F E A T U R E S :

NOTE:

Power supplies, control&dimming devices and fi xing kits must to be orderd separately. Aldabra power supply consumption is equal to 15% of the fi xture nominal power.Photometric data available at www.aldabra.it

p. 1/3

EK1 MonochromaticDATA-SHEET

10246.2

00218

Specifi cations are subject to change without notice.

www.aldabra.itp. 2/3

GENERAL FEATURES:

F I N I S H E S F E A T U R E S :

power W length mm (in) pitch mm (in)

EK1.01.XXXXX.X 4 520 (20,472”) 20 (0,787”)

EK1.02.XXXXX.X 8 1020 (40,157”) 20 (0,787”)

EK1.03.XXXXX.X 12 1520 (59,842”) 20 (0,787”)

EK1.04.XXXXX.X 15 2020 (79,527”) 20 (0,787”)

OPTICAL FEATURES:

LIGHT FEATURES:Mid-Power LED lm/m* Ra Chromatic selection

EK1.XX.X27XX.X 2700K warm white 107 >80 MacAdam 3-step

EK1.XX.X30XX.X 3000K warm white 107 >80 MacAdam 3-step

EK1.XX.X33XX.X 3300K warm white 107 >80 MacAdam 3-step

EK1.XX.X37XX.X 3700K neutral white 139 >80 MacAdam 3-step

EK1.XX.X52XX.X 5200K cool white 160 >80 MacAdam 3-step

EK1.XX.TXXXX.X Transparent diffuser 45°

EK1.XX.DXXXX.X Opal diffuser 109°

EK1.XX.XXXA1.X Anodized Aluminuim

EK1 MonochromaticDATA-SHEET

opal diffuser 109° transparent diffuser 45°

Kindly note that athmospheric agents ( such as lightnings, etc ) , electrostatics charges or disturbances on the installation not caused by Aldabra lighting fi xtures and Led drivers indicated by Aldabra itself, may cause damages on the fi xtures. It is necessary that the electrical installation where the LED lighting fi ttings and their power supply units and control gears are installed must be equipped with proper devices for the protection and suppression of transient phenomena (SPD, isolation transformer, etc...). Such devices must to be coordinated with the other protections of the installation; on this theme, it’s necessary to refer to the electrical installations norms which are in force in each country.

G E N E R A L I N F O R M A T I O N S :

*delivered luminous fl ux (opal)

10246.2

00218

Specifi cations are subject to change without notice.

www.aldabra.itp. 3/3

EK1 MonochromaticDATA-SHEET

RECESSING BOXES:

CSF.0001.0CSF.0002.0CSF.0003.0CSF.0004.0

Type A - anodized aluminium

CSF.0005.0CSF.0006.0CSF.0007.0CSF.0008.0

Type B - anodized aluminium

ACCESSORIES:

ACC.0001.0couple of end caps for recessing box type A

ACC.0002.0couple of end caps for recessing box type B

ACC.0003.0alignment kit for housing boxes type A and B

ACC.0004.0tool for pulling out the module from the housing box

ACC.0006.0fi xing spring

ACC.0028.0safety steel wire for ceiling installation for preventing accidental fall

trimless recessing box 520 mm (20,472”)

trimless recessing box 1020 mm (40,157”)

trimless recessing box 1520 mm (59,842”)

trimless recessing box 2020 mm (79,527”)

recessing box with trim 520 mm (20,472”)

recessing box with trim 1020 mm (40,157”)

recessing box with trim 1520 mm (59,842”)

recessing box with trim 2020 mm (79,527”)

10246.2

00218

Specifi cations are subject to change without notice.

www.aldabra.it

Professional modular linear lighting system for signal lighting suitable for indoor and outdoor settings, permanent im-

mersion down to 30 meters (98,42 ft).

Body fi nished stainless steel 316L with opaque and transparent resin. All the materials are suitable for use in swimming

pools, fountains and with salt water. UV resistance of all materials.

PRODUCT DESCRIPTION:

Materials Stainless steel 316L ; Resins

Finishes Satin stainless steel

Power Supply 24 Vdc constant voltage

Power 8 W/m

Light Source Mid-Power LED 140-180 lm/W

Pitch 20 mm (0,787”)

Color Temperature 2700 K ; 3000 K ; 3300 K ; 3700 K ; 5200 K

Ra > 80

Chromatic Selection Mac-Adam 3-step

Lifetime > 50000 h (TM21)

Optics Transparent or Opal diffuser

Tc metal body < 90 °C (194 °F)

Ta operating temperature - 30 ÷ 50 °C (-22 ÷ 122 °F)

Ts surface temperature ≤ 65 °C (149 °F)

Functions On/Off ; dimmable

CableAWM style 20233 2x0,75mm²(AWG18) Red;Black+1x0,5mm²(AWG20) Violet L. 1 m (3,28 ft).

Weigth 1100 g/m (11,82 oz/ft)

Walk over up to 500 Kg (1102,3 Lbs)

Static load resistance 2000 Kg (4409,2 Lbs)

Installations Ground, Wall , recessed - immersion

Norms60598-1 ; 60598-2 and its parts ; UL 676 ; CSA C22.2 No. 89-15 ; UL 2108 ; UL 1598/C250.-08

T E C H N I C A L S F E A T U R E S :

NOTE:

Power supplies, control&dimming devices and fi xing kits must to be orderd separately. Aldabra power supply consumption is equal to 15% of the fi xture nominal power.Photometric data available at www.aldabra.it

p. 1/3

EK1 Monochromatic Stainless SteelDATA-SHEET

10543.1

91108

E506880

(98,42 ft)

Specifi cations are subject to change without notice.

www.aldabra.itp. 2/3

GENERAL FEATURES:

F I N I S H E S F E A T U R E S :

power (W) length mm (in) pitch mm (in)

EK1.01.XXXXX.X 4 520 (20,472”) 20 (0,787”)

EK1.02.XXXXX.X 8 1020 (40,157”) 20 (0,787”)

OPTICAL FEATURES:

LIGHT FEATURES:

Mid-Power LED lm/m* Ra Chromatic selection

EK1.XX.X27XX.X 2700K warm white 107 >80 MacAdam 3-step

EK1.XX.X30XX.X 3000K warm white 107 >80 MacAdam 3-step

EK1.XX.X33XX.X 3300K warm white 107 >80 MacAdam 3-step

EK1.XX.X37XX.X 3700K neutral white 139 >80 MacAdam 3-step

EK1.XX.X52XX.X 5200K cool white 160 >80 MacAdam 3-step

EK1.XX.TXXXX.X Transparent diffuser 45°

EK1.XX.DXXXX.X Opal diffuser 109°

EK1.XX.XXXS1.X Satin stainless steel

EK1 Monochromatic Stainless SteelDATA-SHEET

10543.1

91108

opal diffuser 109° transparent diffuser 45°

Kindly note that athmospheric agents ( such as lightnings, etc ) , electrostatics charges or disturbances on the installation not caused by Aldabra lighting fi xtures and Led drivers indicated by Aldabra itself, may cause damages on the fi xtures. It is necessary that the electrical installation where the LED lighting fi ttings and their power supply units and control gears are installed must be equipped with proper devices for the protection and suppression of transient phenomena (SPD, isolation transformer, etc...). Such devices must to be coordinated with the other protections of the installation; on this theme, it’s necessary to refer to the electrical installations norms which are in force in each country.

G E N E R A L I N F O R M A T I O N S :

*delivered luminous fl ux (opal)

Specifi cations are subject to change without notice.

www.aldabra.it

RECESSING BOXES:

CSF.0103.0CSF.0104.0

trimless recessing box 520 mm (20,472”)

trimless recessing box 1020 mm (40,157”)

Type A - anodized aluminium

ACCESSORIES:

ACC.0145.0couple of end caps for stainless steel recessing box

ACC.0004.0tool for pulling out the module from the housing box

ACC.0006.0fi xing spring

p. 3/3

EK1 Monochromatic Stainless SteelDATA-SHEET

10543.1

91108

Specifi cations are subject to change without notice.

www.aldabra.itp. 1/3

EK1 Corner MonochromaticDATA-SHEET

PRODUCT DESCRIPTION:

Materials Aluminium ; Resins

Finishes Anodized Aluminium

Power Supply 24 Vdc constant voltage

Power 3 W

Light Source Mid-Power LED 140-180 lm/W

Pitch 20 mm (0,787”)

Color Temperature 2700 K ; 3000 K ; 3300 K ; 3700 K ; 5200 K

Ra > 80

Chromatic Selection Mac-Adam 3-step

Lifetime > 50000 h (TM21)

Optics Transparent or Opal diffuser

Tc metal body < 90 °C (194 °F)

Ta operating temperature - 30 ÷ 50 °C (-22 ÷ 122 °F)

Ts surface temperature ≤ 65 °C (149 °F)

Functions On/Off ; dimmable

CableAWM style 20233 2x0,75mm²(AWG18) Red;Black+1x0,5mm²(AWG20) Violet L. 1 m (3,28 ft).

Weigth 360 g (12,69 oz)

Walk over up to 500 Kg (1102,3 Lbs)

Static load resistance 2000 Kg (4409,2 Lbs)

Installations Ground, Wall , ceiling recessed - immersion

Norms 60598-1 ; 60598-2 and its parts

T E C H N I C A L S F E A T U R E S :

NOTE:

10249.2

00218

Power supplies, control&dimming devices and fi xing kits must to be orderd separately. Aldabra power supply consumption is equal to 15% of the fi xture nominal power.Photometric data available at www.aldabra.it

Professional modular linear lighting system for signal lighting suitable for indoor and outdoor settings, permanent im-

mersion down to 30 meters (98,42 ft).

Body fi nished aluminium with opaque and transparent resin. All the materials are suitable for use in swimming pools,

fountains and with salt water. UV resistance of all materials.

Specifi cations are subject to change without notice.

www.aldabra.itp. 2/3

EK1 Corner MonochromaticDATA-SHEET

GENERAL FEATURES:

F I N I S H E S F E A T U R E S :

power W length mm (in) pitch mm (in)

EK1.51.XXXXX.X 3 225x225 (8,858”x8,858”) 20 (0,787”)

OPTICAL FEATURES:

LIGHT FEATURES:Mid-Power LED lm/m* Ra Chromatic selection

EK1.XX.X27XX.X 2700K warm white 107 >80 MacAdam 3-step

EK1.XX.X30XX.X 3000K warm white 107 >80 MacAdam 3-step

EK1.XX.X33XX.X 3300K warm white 107 >80 MacAdam 3-step

EK1.XX.X37XX.X 3700K neutral white 139 >80 MacAdam 3-step

EK1.XX.X52XX.X 5200K cool white 160 >80 MacAdam 3-step

EK1.XX.TXXXX.X Transparent diffuser 45°

EK1.XX.DXXXX.X Opal diffuser 109°

EK1.XX.XXXA1.X Anodized Aluminuim

opal diffuser 109° transparent diffuser 45°

Kindly note that athmospheric agents ( such as lightnings, etc ) , electrostatics charges or disturbances on the installation not caused by Aldabra lighting fi xtures and Led drivers indicated by Aldabra itself, may cause damages on the fi xtures. It is necessary that the electrical installation where the LED lighting fi ttings and their power supply units and control gears are installed must be equipped with proper devices for the protection and suppression of transient phenomena (SPD, isolation transformer, etc...). Such devices must to be coordinated with the other protections of the installation; on this theme, it’s necessary to refer to the electrical installations norms which are in force in each country.

G E N E R A L I N F O R M A T I O N S :

*delivered luminous fl ux (opal)

10249.2

00218

Specifi cations are subject to change without notice.

www.aldabra.it

RECESSING BOXES:

CSF.0001.0CSF.0002.0CSF.0003.0CSF.0004.0

Type A - anodized aluminium

CSF.0005.0CSF.0006.0CSF.0007.0CSF.0008.0

Type B - anodized aluminium

ACCESSORIES:

ACC.0001.0couple of end caps for recessing box type A

ACC.0002.0couple of end caps for recessing box type B

ACC.0003.0alignment kit for housing boxes type A and B

ACC.0004.0tool for pulling out the module from the housing box

ACC.0006.0fi xing spring

ACC.0028.0safety steel wire for ceiling installation for preventing accidental fall

p. 3/3

EK1 Corner MonochromaticDATA-SHEET

*For corner or external edge products, order a linear recessing box to be cut on site.

trimless recessing box 520 mm (20,472”)

trimless recessing box 1020 mm (40,157”)

trimless recessing box 1520 mm (59,842”)

trimless recessing box 2020 mm (79,527”)

recessing box with trim 520 mm (20,472”)

recessing box with trim 1020 mm (40,157”)

recessing box with trim 1520 mm (59,842”)

recessing box with trim 2020 mm (79,527”)

10249.2

00218

Specifi cations are subject to change without notice.

www.aldabra.itp. 1/3

EK1 External edge MonochromaticDATA-SHEET

Professional modular linear lighting system for signal lighting suitable for indoor and outdoor settings, permanent im-

mersion down to 30 meters (98,42 ft).

Body fi nished aluminum with opaque and transparent resin. All the materials are suitable for use in swimming pools,

fountains and with salt water. UV resistance of all materials.

PRODUCT DESCRIPTION:

Materials Aluminium ; Resins

Finishes Anodized Aluminium

Power Supply 24 Vdc constant voltage

Power 3 W

Light Source Mid-Power LED 140-180 lm/W

Pitch 20 mm (0,787”)

Color Temperature 2700 K ; 3000 K ; 3300 K ; 3700 K ; 5200 K

Ra > 80

Chromatic Selection Mac-Adam 3-step

Lifetime > 50000 h (TM21)

Optics Transparent or Opal diffuser

Tc metal body < 90 °C (194 °F)

Ta operating temperature - 30 ÷ 50 °C (-22 ÷ 122 °F)

Ts surface temperature ≤ 65 °C (149 °F)

Functions On/Off ; dimmable

CableAWM style 20233 2x0,75mm²(AWG18) Red;Black+1x0,5mm²(AWG20) Violet L. 1 m (3,28 ft).

Weigth 384 g (13,54 oz)

Walk over up to 500 Kg (1102,3 Lbs)

Static load resistance 2000 Kg (4409,2 Lbs)

Installations Ground, Wall ,ceiling recessed - immersion

Norms 60598-1 ; 60598-2 and its parts

T E C H N I C A L S F E A T U R E S :

NOTE:

10251.2

00218

Power supplies, control&dimming devices and fi xing kits must to be orderd separately. Aldabra power supply consumption is equal to 15% of the fi xture nominal power.Photometric data available at www.aldabra.it

Specifi cations are subject to change without notice.

www.aldabra.itp. 2/3

GENERAL FEATURES:

F I N I S H E S F E A T U R E S :

power (W) length mm (in) pitch mm (in)

EK1.52.XXXXX.X 3 240x240 (9,448”x9,448”) 20 (0,787”)

OPTICAL FEATURES:

LIGHT FEATURES:Mid-Power LED lm/m* Ra Chromatic selection

EK1.XX.X27XX.X 2700K warm white 107 >80 MacAdam 3-step

EK1.XX.X30XX.X 3000K warm white 107 >80 MacAdam 3-step

EK1.XX.X33XX.X 3300K warm white 107 >80 MacAdam 3-step

EK1.XX.X37XX.X 3700K neutral white 139 >80 MacAdam 3-step

EK1.XX.X52XX.X 5200K cool white 160 >80 MacAdam 3-step

EK1.XX.TXXXX.X Transparent diffuser 45°

EK1.XX.DXXXX.X Opal diffuser 109°

EK1.XX.XXXA1.X Anodized Aluminuim

EK1 External edge MonochromaticDATA-SHEET

opal diffuser 109° transparent diffuser 45°

Kindly note that athmospheric agents ( such as lightnings, etc ) , electrostatics charges or disturbances on the installation not caused by Aldabra lighting fi xtures and Led drivers indicated by Aldabra itself, may cause damages on the fi xtures. It is necessary that the electrical installation where the LED lighting fi ttings and their power supply units and control gears are installed must be equipped with proper devices for the protection and suppression of transient phenomena (SPD, isolation transformer, etc...). Such devices must to be coordinated with the other protections of the installation; on this theme, it’s necessary to refer to the electrical installations norms which are in force in each country.

G E N E R A L I N F O R M A T I O N S :

*delivered luminous fl ux (opal)

10251.2

00218

Specifi cations are subject to change without notice.

www.aldabra.it

RECESSING BOXES:

CSF.0001.0CSF.0002.0CSF.0003.0CSF.0004.0

Type A - anodized aluminium

CSF.0005.0CSF.0006.0CSF.0007.0CSF.0008.0

Type B - anodized aluminium

ACCESSORIES:

ACC.0001.0couple of end caps for recessing box type A

ACC.0002.0couple of end caps for recessing box type B

ACC.0003.0alignment kit for housing boxes type A and B

ACC.0004.0tool for pulling out the module from the housing box

ACC.0006.0fi xing spring

ACC.0028.0safety steel wire for ceiling installation for preventing accidental fall

p. 3/3

EK1 External edge MonochromaticDATA-SHEET

*For corner or external edge products, order a linear recessing box to be cut on site.

trimless recessing box 520 mm (20,472”)

trimless recessing box 1020 mm (40,157”)

trimless recessing box 1520 mm (59,842”)

trimless recessing box 2020 mm (79,527”)

recessing box with trim 520 mm (20,472”)

recessing box with trim 1020 mm (40,157”)

recessing box with trim 1520 mm (59,842”)

recessing box with trim 2020 mm (79,527”)

10251.2

00218

Specifi cations are subject to change without notice.

www.aldabra.it

PRODUCT DESCRIPTION:

p. 1/3

EK1 RGBDATA-SHEET

Professional modular linear lighting system for signal lighting suitable for indoor and outdoor settings, permanent im-

mersion down to 30 meters (98,42 ft).

Body fi nished aluminium with opaque and transparent resin. All the materials are suitable for use in swimming pools,

fountains and with salt water. UV resistance of all materials.

Materials Aluminium ; Resins

Finishes Anodized Aluminium

Power Supply 24 Vdc constant voltage

Power 15 W/m

Light Source Signal LED

Pitch 20 mm (0,787”)

Dominant Wavelength R=622nm, G=530nm, B=470nm

Lifetime > 50000 h (L80B20)

Optics Transparent or Opal diffuser

Tc metal body < 90 °C (194 °F)

Ta operating temperature - 30 ÷ 50 °C (-22 ÷ 122 °F)

Ts surface temperature ≤ 65 °C (149 °F)

Functions On/Off ; dimmable

Cable RGBAWM style 20233 2x0,75mm²(AWG18) Red;Black+3x0,5mm²(AWG20) Red/black, Green/black, Blue/black) L. 1 m (3,28 ft).

Weigth 800 g/m (8,603 oz/ft)

Walk over up to 500 Kg (1102,3 Lbs)

Static load resistance 2000 Kg (4409,2 Lbs)

Installations Ground, Wall ,ceiling recessed - immersion

Norms 60598-1 ; 60598-2 and its parts

T E C H N I C A L S F E A T U R E S :

NOTE:

10247.2

00218

Power supplies, control&dimming devices and fi xing kits must to be orderd separately. Aldabra power supply consumption is equal to 15% of the fi xture nominal power.Photometric data available at www.aldabra.it

Specifi cations are subject to change without notice.

www.aldabra.itp. 2/3

EK1 RGBDATA-SHEET

GENERAL FEATURES:

F I N I S H E S F E A T U R E S :

power W length mm (in) pitch mm (in)

EK1.01.XXXXX.X 8 520 (20,472”) 20 (0,787”)

EK1.02.XXXXX.X 15 1020 (40,157”) 20 (0,787”)

EK1.03.XXXXX.X 23 1520 (59,842”) 20 (0,787”)

EK1.04.XXXXX.X 30 2020 (79,527”) 20 (0,787”)

OPTICAL FEATURES:

LIGHT FEATURES:Signal LED lm/m*

EK1.XX.X90XX.X R, G, B 100

EK1.XX.TXXXX.X Transparent diffuser 45°

EK1.XX.DXXXX.X Opal diffuser 109°

EK1.XX.XXXA1.X Anodized Aluminuim

opal diffuser 109° transparent diffuser 45°

Kindly note that athmospheric agents ( such as lightnings, etc ) , electrostatics charges or disturbances on the installation not caused by Aldabra lighting fi xtures and Led drivers indicated by Aldabra itself, may cause damages on the fi xtures. It is necessary that the electrical installation where the LED lighting fi ttings and their power supply units and control gears are installed must be equipped with proper devices for the protection and suppression of transient phenomena (SPD, isolation transformer, etc...). Such devices must to be coordinated with the other protections of the installation; on this theme, it’s necessary to refer to the electrical installations norms which are in force in each country.

G E N E R A L I N F O R M A T I O N S :

*delivered luminous fl ux (opal)

10247.2

00218

Specifi cations are subject to change without notice.

www.aldabra.it

RECESSING BOXES:

CSF.0001.0CSF.0002.0CSF.0003.0CSF.0004.0

Type A - anodized aluminium

CSF.0005.0CSF.0006.0CSF.0007.0CSF.0008.0

Type B - anodized aluminium

ACCESSORIES:

ACC.0001.0couple of end caps for recessing box type A

ACC.0002.0couple of end caps for recessing box type B

ACC.0003.0alignment kit for housing boxes type A and B

ACC.0004.0tool for pulling out the module from the housing box

ACC.0006.0fi xing spring

ACC.0028.0safety steel wire for ceiling installation for preventing accidental fall

p. 3/3

EK1 RGBDATA-SHEET

trimless recessing box 520 mm (20,472”)

trimless recessing box 1020 mm (40,157”)

trimless recessing box 1520 mm (59,842”)

trimless recessing box 2020 mm (79,527”)

recessing box with trim 520 mm (20,472”)

recessing box with trim 1020 mm (40,157”)

recessing box with trim 1520 mm (59,842”)

recessing box with trim 2020 mm (79,527”)

10247.2

00218

Specifi cations are subject to change without notice.

www.aldabra.itp. 1/3

EK1 RGB Stainless steelDATA-SHEET

Materials Stainless steel 316L ; Resins

Finishes Satin stainless steel

Power Supply 24 Vdc constant voltage

Power 15 W/m

Light Source Signal LED

Pitch 20 mm (0,787”)

Dominant Wavelength R=622nm, G=530nm, B=470nm

Lifetime > 50000 h (L80B20)

Optics Transparent or Opal diffuser

Tc metal body < 90 °C (194 °F)

Ta operating temperature - 30 ÷ 50 °C (-22 ÷ 122 °F)

Ts surface temperature ≤ 65 °C (149 °F)

Functions On/Off ; dimmable

Cable RGBAWM style 20233 2x0,75mm²(AWG18) Red;Black+3x0,5mm²(AWG20) Red/black, Green/black, Blue/black L. 1 m (3,28 ft).

Weigth 1100 g/m (11,82 oz/ft)

Walk over up to 500 Kg (1102,3 Lbs)

Static load resistance 2000 Kg (4409,2 Lbs)

Installations Ground, Wall , recessed - immersion

Norms60598-1 ; 60598-2 and its parts ; UL 676 ; CSA C22.2 No. 89-15 ; UL 2108 ; UL 1598/C250.-08

T E C H N I C A L S F E A T U R E S :

NOTE:

Power supplies, control&dimming devices and fi xing kits must to be orderd separately. Aldabra power supply consumption is equal to 15% of the fi xture nominal power.Photometric data available at www.aldabra.it

10544.1

91108

PRODUCT DESCRIPTION:Professional modular linear lighting system for signal lighting suitable for indoor and outdoor settings, permanent im-

mersion down to 30 meters (98,42 ft).

Body fi nished stainless steel 316L with opaque and transparent resin. All the materials are suitable for use in swimming

pools, fountains and with salt water. UV resistance of all materials.

E506880

(98,42 ft)

Specifi cations are subject to change without notice.

www.aldabra.itp. 2/3

EK1 RGB Stainless steelDATA-SHEET

GENERAL FEATURES:

F I N I S H E S F E A T U R E S :

power (W) length mm (in) pitch mm (in)

EK1.01.XXXXX.X 8 520 (20,472”) 20 (0,787”)

EK1.02.XXXXX.X 15 1020 (40,157”) 20 (0,787”)

OPTICAL FEATURES:

LIGHT FEATURES:Signal LED lm/m*

EK1.XX.X90XX.X R, G, B 100

EK1.XX.TXXXX.X Transparent diffuser 45°

EK1.XX.DXXXX.X Opal diffuser 109°

EK1.XX.XXXS1.X Satin stainless steel

10544.1

91108

opal diffuser 109° transparent diffuser 45°

Kindly note that athmospheric agents ( such as lightnings, etc ) , electrostatics charges or disturbances on the installation not caused by Aldabra lighting fi xtures and Led drivers indicated by Aldabra itself, may cause damages on the fi xtures. It is necessary that the electrical installation where the LED lighting fi ttings and their power supply units and control gears are installed must be equipped with proper devices for the protection and suppression of transient phenomena (SPD, isolation transformer, etc...). Such devices must to be coordinated with the other protections of the installation; on this theme, it’s necessary to refer to the electrical installations norms which are in force in each country.

G E N E R A L I N F O R M A T I O N S :

*delivered luminous fl ux (opal)

Specifi cations are subject to change without notice.

www.aldabra.it

RECESSING BOXES:

CSF.0103.0CSF.0104.0

Type A - anodized aluminium

ACCESSORIES:

ACC.0145.0couple of end caps for stainless steel recessing box

ACC.0004.0tool for pulling out the module from the housing box

ACC.0006.0fi xing spring

p. 3/3

EK1 RGB Stainless steelDATA-SHEET

10544.1

91108

trimless recessing box 520 mm (20,472”)

trimless recessing box 1020 mm (40,157”)

Specifi cations are subject to change without notice.

www.aldabra.itp. 1/3

EK1 Corner RGBDATA-SHEET

PRODUCT DESCRIPTION:

Materials Aluminium ; Resins

Finishes Anodized Aluminium

Power Supply 24 Vdc constant voltage

Power 6 W

Light Source Signal LED

Pitch 20 mm (0,787”)

Dominant Wavelength R=622nm, G=530nm, B=470nm

Lifetime > 50000 h (L80B20)

Optics Transparent or Opal diffuser

Tc metal body < 90 °C (194 °F)

Ta operating temperature - 30 ÷ 50 °C (-22 ÷ 122 °F)

Ts surface temperature ≤ 65 °C (149 °F)

Functions On/Off ; dimmable

Cable2x AWM style 20233 2x0,75mm²(AWG18) Red;Black+3x0,5mm²(AWG20) Red/black, Green/black, Blue/black) L. 1 m (3,28 ft).

Weigth 421 g (14,85 oz)

Walk over up to 500 Kg (1102,3 Lbs)

Static load resistance 2000 Kg (4409,2 Lbs)

Installations Ground, Wall , ceiling recessed - immersion

Norms 60598-1 ; 60598-2 and its parts

T E C H N I C A L S F E A T U R E S :

NOTE:

10250.2

00218

Power supplies, control&dimming devices and fi xing kits must to be orderd separately. Aldabra power supply consumption is equal to 15% of the fi xture nominal power.Photometric data available at www.aldabra.it

Professional modular linear lighting system for signal lighting suitable for indoor and outdoor settings, permanent im-

mersion down to 30 meters (98,42 ft).

Body fi nished aluminium with opaque and transparent resin. All the materials are suitable for use in swimming pools,

fountains and with salt water. UV resistance of all materials.

Specifi cations are subject to change without notice.

www.aldabra.itp. 2/3

EK1 Corner RGBDATA-SHEET

GENERAL FEATURES:

F I N I S H E S F E A T U R E S :

power (W) length mm (in) pitch mm (in)

EK1.51.XXXXX.X 6 225x225 (8,858”x8,858”) 20 (0,787”)

OPTICAL FEATURES:

LIGHT FEATURES:Signal LED lm/m*

EK1.XX.X90XX.X R, G, B, 100

EK1.XX.TXXXX.X Transparent diffuser 45°

EK1.XX.DXXXX.X Opal diffuser 109°

EK1.XX.XXXA1.X Anodized Aluminuim

opal diffuser 109° transparent diffuser 45°

Kindly note that athmospheric agents ( such as lightnings, etc ) , electrostatics charges or disturbances on the installation not caused by Aldabra lighting fi xtures and Led drivers indicated by Aldabra itself, may cause damages on the fi xtures. It is necessary that the electrical installation where the LED lighting fi ttings and their power supply units and control gears are installed must be equipped with proper devices for the protection and suppression of transient phenomena (SPD, isolation transformer, etc...). Such devices must to be coordinated with the other protections of the installation; on this theme, it’s necessary to refer to the electrical installations norms which are in force in each country.

G E N E R A L I N F O R M A T I O N S :

*delivered luminous fl ux (opal)

10250.2

00218

Specifi cations are subject to change without notice.

www.aldabra.it

RECESSING BOXES:

CSF.0001.0CSF.0002.0CSF.0003.0CSF.0004.0

Type A - anodized aluminium

CSF.0005.0CSF.0006.0CSF.0007.0CSF.0008.0

Type B - anodized aluminium

ACCESSORIES:

ACC.0001.0couple of end caps for recessing box type A

ACC.0002.0couple of end caps for recessing box type B

ACC.0003.0alignment kit for housing boxes type A and B

ACC.0004.0tool for pulling out the module from the housing box

ACC.0006.0fi xing spring

ACC.0028.0safety steel wire for ceiling installation for preventing accidental fall

p. 3/3

EK1 Corner RGBDATA-SHEET

*For corner or external edge products, order a linear recessing box to be cut on site.

trimless recessing box 520 mm (20,472”)

trimless recessing box 1020 mm (40,157”)

trimless recessing box 1520 mm (59,842”)

trimless recessing box 2020 mm (79,527”)

recessing box with trim 520 mm (20,472”)

recessing box with trim 1020 mm (40,157”)

recessing box with trim 1520 mm (59,842”)

recessing box with trim 2020 mm (79,527”)

10250.2

00218

Specifi cations are subject to change without notice.

www.aldabra.itp. 1/3

EK1 External edge RGBDATA-SHEET

PRODUCT DESCRIPTION:

Materials Aluminium ; Resins

Finishes Anodized Aluminium

Power Supply 24 Vdc constant voltage

Power 6 W

Light Source Signal LED

Pitch 20 mm (0,787”)

Dominant Wavelength R=622nm, G=530nm, B=470nm

Lifetime > 50000 h (L80B20)

Optics Transparent or Opal diffuser

Tc metal body < 90 °C (194 °F)

Ta operating temperature - 30 ÷ 50 °C (-22 ÷ 122 °F)

Ts surface temperature ≤ 65 °C (149 °F)

Functions On/Off ; dimmable

Cable2x AWM style 20233 2x0,75mm²(AWG18) Red;Black+3x0,5mm²(AWG20) Red/black, Green/black, Blue/black) L. 1 m (3,28 ft).

Weigth 445 g (15,69 oz)

Walk over up to 500 Kg (1102,3 Lbs)

Static load resistance 2000 Kg (4409,2 Lbs)

Installations Ground, Wall , ceiling recessed - immersion

Norms 60598-1 ; 60598-2 and its parts

T E C H N I C A L S F E A T U R E S :

NOTE:

10252.2

00218

Power supplies, control&dimming devices and fi xing kits must to be orderd separately. Aldabra power supply consumption is equal to 15% of the fi xture nominal power.Photometric data available at www.aldabra.it

Professional modular linear lighting system for signal lighting suitable for indoor and outdoor settings, permanent im-

mersion down to 30 meters (98,42 ft).

Body fi nished aluminum with opaque and transparent resin. All the materials are suitable for use in swimming pools,

fountains and with salt water. UV resistance of all materials.

Specifi cations are subject to change without notice.

www.aldabra.itp. 2/3

EK1 External edge RGBDATA-SHEET

GENERAL FEATURES:

F I N I S H E S F E A T U R E S :

power (W) length mm (in) pitch mm (in)

EK1.52.XXXXX.X 6 240x240 (9,448”x9,448”) 20 (0,787”)

OPTICAL FEATURES:

LIGHT FEATURES:Signal LED lm/m*

EK1.XX.X90XX.X R, G, B, 100

EK1.XX.TXXXX.X Transparent diffuser 45°

EK1.XX.DXXXX.X Opal diffuser 109°

EK1.XX.XXXA1.X Anodized Aluminuim

opal diffuser 109° transparent diffuser 45°

Kindly note that athmospheric agents ( such as lightnings, etc ) , electrostatics charges or disturbances on the installation not caused by Aldabra lighting fi xtures and Led drivers indicated by Aldabra itself, may cause damages on the fi xtures. It is necessary that the electrical installation where the LED lighting fi ttings and their power supply units and control gears are installed must be equipped with proper devices for the protection and suppression of transient phenomena (SPD, isolation transformer, etc...). Such devices must to be coordinated with the other protections of the installation; on this theme, it’s necessary to refer to the electrical installations norms which are in force in each country.

G E N E R A L I N F O R M A T I O N S :

*delivered luminous fl ux (opal)

10252.2

00218

Specifi cations are subject to change without notice.

www.aldabra.it

RECESSING BOXES:

CSF.0001.0CSF.0002.0CSF.0003.0CSF.0004.0

Type A - anodized aluminium

CSF.0005.0CSF.0006.0CSF.0007.0CSF.0008.0

Type B - anodized aluminium

ACCESSORIES:

ACC.0001.0couple of end caps for recessing box type A

ACC.0002.0couple of end caps for recessing box type B

ACC.0003.0alignment kit for housing boxes type A and B

ACC.0004.0tool for pulling out the module from the housing box

ACC.0006.0fi xing spring

ACC.0028.0safety steel wire for ceiling installation for preventing accidental fall

p. 3/3

EK1 External edge RGBDATA-SHEET

*For corner or external edge products, order a linear recessing box to be cut on site.

trimless recessing box 520 mm (20,472”)

trimless recessing box 1020 mm (40,157”)

trimless recessing box 1520 mm (59,842”)

trimless recessing box 2020 mm (79,527”)

recessing box with trim 520 mm (20,472”)

recessing box with trim 1020 mm (40,157”)

recessing box with trim 1520 mm (59,842”)

recessing box with trim 2020 mm (79,527”)

10252.2

00218

Specifi cations are subject to change without notice.

www.aldabra.it

PRODUCT DESCRIPTION:

p. 1/3

EK1 RGB moveDATA-SHEET

Materials Aluminium ; Resins

Finishes Anodized Aluminium

Power Supply 24 Vdc constant voltage

Power 12 W/m

Light Source Signal LED

Pitch 25 mm (0,984”)

Dominant Wavelength R=622nm, G=530nm, B=470nm

Lifetime > 50000 h (L80B20)

Optics Opal diffuser

Tc metal body < 90 °C (194 °F)

Ta operating temperature - 30 ÷ 50 °C (-22 ÷ 122 °F)

Ts surface temperature ≤ 65 °C (149 °F)

Functions On/Off ; dimmable

Cable RGB moveIn: AWM style 20233 2xAWG18 (Red;Black)+2xAWG20 (R/b, B/b) L. 1 m (3,28 ft).Out: AWM style 20233 2xAWG18 (Red;Black) L. 1 m (3,28 ft).

Weigth 800 g/m (8,603 oz/ft)

Walk over up to 500 Kg (1102,3 Lbs)

Static load resistance 2000 Kg (4409,2 Lbs)

Installations Ground, Wall , ceiling recessed - immersion

Norms 60598-1 ; 60598-2 and its parts

T E C H N I C A L S F E A T U R E S :

NOTE:

10248.2

00218

Power supplies, control&dimming devices and fi xing kits must to be orderd separately. Aldabra power supply consumption is equal to 15% of the fi xture nominal power.Photometric data available at www.aldabra.it

Professional modular linear lighting system for signal lighting suitable for indoor and outdoor settings, permanent im-

mersion down to 30 meters (98,42 ft).

Body fi nished aluminium with opaque and transparent resin. All the materials are suitable for use in swimming pools,

fountains and with salt water. UV resistance of all materials.

Specifi cations are subject to change without notice.

www.aldabra.itp. 2/3

EK1 RGB moveDATA-SHEET

GENERAL FEATURES:

F I N I S H E S F E A T U R E S :

power W length mm (in) pitch mm (in)

EK1.01.XXXXX.X 6 520 (20,472”) 25 (0,984”)

EK1.02.XXXXX.X 12 1020 (40,157”) 25 (0,984”)

EK1.03.XXXXX.X 18 1520 (59,842”) 25 (0,984”)

EK1.04.XXXXX.X 24 2020 (79,527”) 25 (0,984”)

OPTICAL FEATURES:

LIGHT FEATURES:Signal LED lm/m*

EK1.XX.X92XX.X R, G, B 80

EK1.XX.DXXXX.X Opal diffuser 109°

EK1.XX.XXXA1.X Anodized Aluminuim

opal diffuser 109° transparent diffuser 45°

Kindly note that athmospheric agents ( such as lightnings, etc ) , electrostatics charges or disturbances on the installation not caused by Aldabra lighting fi xtures and Led drivers indicated by Aldabra itself, may cause damages on the fi xtures. It is necessary that the electrical installation where the LED lighting fi ttings and their power supply units and control gears are installed must be equipped with proper devices for the protection and suppression of transient phenomena (SPD, isolation transformer, etc...). Such devices must to be coordinated with the other protections of the installation; on this theme, it’s necessary to refer to the electrical installations norms which are in force in each country.

G E N E R A L I N F O R M A T I O N S :

*delivered luminous fl ux (opal)

10248.2

00218

Specifi cations are subject to change without notice.

www.aldabra.it

RECESSING BOXES:

CSF.0001.0CSF.0002.0CSF.0003.0CSF.0004.0

Type A - anodized aluminium

CSF.0005.0CSF.0006.0CSF.0007.0CSF.0008.0

Type B - anodized aluminium

ACCESSORIES:

ACC.0001.0couple of end caps for recessing box type A

ACC.0002.0couple of end caps for recessing box type B

ACC.0003.0alignment kit for housing boxes type A and B

ACC.0004.0tool for pulling out the module from the housing box

ACC.0006.0fi xing spring

ACC.0028.0safety steel wire for ceiling installation for preventing accidental fall

p. 3/3

EK1 RGB moveDATA-SHEET

trimless recessing box 520 mm (20,472”)

trimless recessing box 1020 mm (40,157”)

trimless recessing box 1520 mm (59,842”)

trimless recessing box 2020 mm (79,527”)

recessing box with trim 520 mm (20,472”)

recessing box with trim 1020 mm (40,157”)

recessing box with trim 1520 mm (59,842”)

recessing box with trim 2020 mm (79,527”)

10248.2

00218