EI Shaft Ace - Condition Monitoring Analytics
6
Datasheet EI-
Transcript of EI Shaft Ace - Condition Monitoring Analytics
Datasheet
EI-
2
EI-ALIGNMENT EI-SHAFT ACETM
EI-Shaft AceTM is the simplest & easiest to use laser shaft alignment experience available. The simple 5-Step alignment process is so intuitive that most users can start performing laser alignments right out of the box. Microsoft Windows® ready and can be installed on on any Windows OS tablet, laptop or PC.
EI-Shaft AceTM
the world’s fastest & easiest to use laser laser shaft alignment system.
System AdvantagesImprove asset availability & uptime through precision alignment.
Reduce unecessary costs associated with unplanned failures & premature wear.
Reduce your energy consumption.
Wireless Bluetooth® communications for safety
indicators
5-Step-SimpleTM alignment process
Sensors UnitsOur sensors use the latest digital Bluetooth® data processing technology. Sensor units have 30mm CCD-detectors to accomodate
providing you with precise, repeatable measuring results and allows the system to be more interferenceimmune from the external factors such as vibration and ambient light.
3
Technical SpecsMaterial Anodized aluminium
Dimensions 90 x 60 x 32 mm
Laser radiation
Laser power
Diode laser with laser wavelength 635 nm, class II< 1 mW
Measurement distance
Up to 10m
Detector length 30mm
Detector type Digital CCD detector
Measurement accuracy
0.3% ± 7 m
Inclinometer 0.1
Degree of protection
IP65
Operating time up to 20 hours
Bluetooth 4.0
Operating temperature 14° F to 140° F (-10° C to +60° C)
Thanks to the compact and durable case of the sensor units, you can work even in the most confined space & harsh environments. Large CCD detectors also eliminate the need to pre-alignment machines.
Responsive windows
interface with 3D animation
EI-ALIGNMENT EI-SHAFT ACETM
4
EI-ALIGNMENT EI-PULLEY ACETM
Sheave alignmentmethods, such as the labor intensive string and straight edge method, however, laser alignment is more accurate. The Pulley AceTM will greatly reduce downtime and manpower needed to do the alignment. This results in increased production uptime and great labor savings.
A good sheave alignment laser system will increase
System AdvantagesIntroducing new Retro-Reflective alignment targets that work indoors or outdoors using enhanced reflective technology. This means that the laser lines can be seen better in direct sunlight and adjustments are easier to make.
How it worksThe Pulley ACE™ sheave alignment tool projects a plane of laser light parallel with the faces of drive and driven sheaves. Adjustable targets attach to sheaves, intersect the laser beam and visually show any misalignment. The Retro-Reflective film on the center line of the target reflects the laser beam and “glows” for enhanced visibility and accuracy.
“You know you’re aligned when the green line glows.”- Ron Dinwiddie, Production Manager
Faster Set-ups
More Accurate Adjustments
Less Bearing Wear
5
EI-ALIGNMENT EI-PULLEY ACETM
Technical SpecsLaser Class II, <1mw
Vial 40 Arc Minute
Laser radiation
Beam Spread
Diode laser with laser wavelength 635 nm, class II60” @ 3’
Line Width Approx. 1/16” @ 30”
Magnets Nickel Plated, Rare Earth
Power 2 AAA Alkaline Batteries (5hrs)
Targets 3 – Retro-Reflective, Adjustable over 1”
Accuracy .070” or 7 times more accurate than industry standards.
Dimension: 1 3/4” x 6 3/4” x 5/8”
The reflective film shows the laser’s alignment line in “Real Time”. This is called “Positive Tracking”.
Reduce premature
wear or failure of pulleys, belts and
bearings.
Decrease Vibration – Minimize Belt and Motor Bearing Wear.
Compact Size – Easy to use on small diameter sheaves.
10 Times Brighter – Can be used in direct sunlight
Use as a laser level – Check the height and flatness of motor and gear box mounting plates.
Includes:Pulley ACE™ System3 – Ret ro - Re f l e c t i v e , A d j u s ta b l e Alignment Targets1 – Foam Filled, Hard Carrying Case
Service & Support Engineer 1-877-223-4606 /+52 (55) 6280-7654 / 7592-2130
[email protected]@erbessdreliability.com
BUY ONLINE www.erbessd-instruments.com
www.erbessdreliability.com
Service & Support Engineer 1-877-223-4606 /+52 (55) 6280-7654 / 7592-2130
[email protected]@erbessdreliability.com
BUY ONLINE www.erbessd-instruments.com
www.erbessdreliability.com
ALL IMAGES ARE FOR ILLUSTRATIVE PURPOSES ONLY. THE FINAL PRODUCT MAY VARY DEPENDING ON THE VERSION AND/OR THE IMPROVEMENTS MADE TO THE DEVICES OR COMPONENTS
© 2017 ERBESSD RELIABILITY INSTRUMENTS
