Eg Model Questions
3
SRI SUBRAMANYA COLLEGE OF ENGINEERING & TECHNOLOGY PALANI – 624615 DEPARTMENT OF MECHANICAL ENGINEERING CLASS TEST - III Subject: Engineering Graphics Date: 27/11/2013 Sub. Code: GE 6152 Max. Marks: 25 Year/ Sem: I/ I ANSWER THE FOLLOWING QUESTIONS : 1. A cone of base 50mm diameter and 65mm height is resting on its base on HP. It is cut by a plane perpendicular to VP and parallel to and 12mm away from one of its end generators. Draw its sectional top view. (5) 2. A hexagonal pyramid, side of base 30mm and altitude 70mm long rests with its base on HP with two of its base sides parallel to VP, It is cut by a section plane perpendicular to VP and inclined at 45⁰ to HP and passing through a point 15mm above the base and located on the axis. Draw the sectional top view, the true shape of the section and left side view of the section. (10) 3. A cone of diameter of base 50mm and altitude 65mm is lying on its base on HP. It is sectioned by a plane normal to both HP and VP at a distance of 10mm to the right of the axis of the cone. Draw the development of the lateral surface of the left side remaining portion. (10) SRI SUBRAMANYA COLLEGE OF ENGINEERING & TECHNOLOGY PALANI – 624615 DEPARTMENT OF MECHANICAL ENGINEERING CLASS TEST - III Subject: Engineering Graphics Date: 27/11/2013 Sub. Code: GE 6152 Max. Marks: 25 Year/ Sem: I/ I
-
Upload
saravanan-kumar-p -
Category
Documents
-
view
10 -
download
0
description
this is anna university question papaer for EG
Transcript of Eg Model Questions
SRI SUBRAMANYA COLLEGE OF ENGINEERING & TECHNOLOGYPALANI – 624615
DEPARTMENT OF MECHANICAL ENGINEERINGCLASS TEST - III
Subject: Engineering Graphics Date: 27/11/2013Sub. Code: GE 6152 Max. Marks: 25
Year/ Sem: I/ I
ANSWER THE FOLLOWING QUESTIONS :
1. A cone of base 50mm diameter and 65mm height is resting on its base on HP. It is cut by a plane perpendicular to VP and parallel to and 12mm away from one of its end generators. Draw its sectional top view. (5)
2. A hexagonal pyramid, side of base 30mm and altitude 70mm long rests with its base on HP with two of its base sides parallel to VP, It is cut by a section plane perpendicular to VP and inclined at 45 to HP⁰ and passing through a point 15mm above the base and located on the axis. Draw the sectional top view, the true shape of the section and left side view of the section. (10)
3. A cone of diameter of base 50mm and altitude 65mm is lying on its base on HP. It is sectioned by a plane normal to both HP and VP at a distance of 10mm to the right of the axis of the cone. Draw the development of the lateral surface of the left side remaining portion. (10)
SRI SUBRAMANYA COLLEGE OF ENGINEERING & TECHNOLOGYPALANI – 624615
DEPARTMENT OF MECHANICAL ENGINEERINGCLASS TEST - III
Subject: Engineering Graphics Date: 27/11/2013Sub. Code: GE 6152 Max. Marks: 25
Year/ Sem: I/ I
ANSWER THE FOLLOWING QUESTIONS :
1. A cone of base 50mm diameter and 65mm height is resting on its base on HP. It is cut by a plane perpendicular to VP and parallel to and 12mm away from one of its end generators. Draw its sectional top view. (5)
2. A hexagonal pyramid, side of base 30mm and altitude 70mm long rests with its base on HP with two of its base sides parallel to VP, It is cut by a section plane perpendicular to VP and inclined at 45 to HP⁰ and passing through a point 15mm above the base and located on the axis. Draw the sectional top view, the true shape of the section and left side view of the section. (10)
3. A cone of diameter of base 50mm and altitude 65mm is lying on its base on HP. It is sectioned by a plane normal to both HP and VP at a distance of 10mm to the right of the axis of the cone. Draw the development of the lateral surface of the left side remaining portion. (10)
SRI SUBRAMANYA COLLEGE OF ENGINEERING & TECHNOLOGYPALANI – 624615
DEPARTMENT OF MECHANICAL ENGINEERINGCLASS TEST - III
Subject: Engineering Graphics Date: 27/11/2013Sub. Code: GE 6152 Max. Marks: 25
Year/ Sem: I/ I
ANSWER THE FOLLOWING QUESTIONS :
1. A cone of base 50mm diameter and 65mm height is resting on its base on HP. It is cut by a plane perpendicular to VP and parallel to and 12mm away from one of its end generators. Draw its sectional top view. (5)
2. A hexagonal pyramid, side of base 30mm and altitude 70mm long rests with its base on HP with two of its base sides parallel to VP, It is cut by a section plane perpendicular to VP and inclined at 45 to HP⁰ and passing through a point 15mm above the base and located on the axis. Draw the sectional top view, the true shape of the section and left side view of the section. (10)
3. A cone of diameter of base 50mm and altitude 65mm is lying on its base on HP. It is sectioned by a plane normal to both HP and VP at a distance of 10mm to the right of the axis of the cone. Draw the development of the lateral surface of the left side remaining portion. (10)
