Effect of WMA Additives on Binders Workability and Performance · 2011-10-14 · Effect of WMA...
Transcript of Effect of WMA Additives on Binders Workability and Performance · 2011-10-14 · Effect of WMA...
![Page 1: Effect of WMA Additives on Binders Workability and Performance · 2011-10-14 · Effect of WMA Additives on Binders Workability and Performance Hussain U. Bahia, Andrew Hanz and Pouya](https://reader030.fdocuments.us/reader030/viewer/2022040722/5e30d67cd9af69097324a592/html5/thumbnails/1.jpg)
Effect of WMA Additives on Binders Workability and PerformanceHussain U. Bahia, Andrew Hanz and Pouya Temourpour
2nd International Warm Mix Asphalt ConferenceSt. Louis, Missori, October 12, 2011
![Page 2: Effect of WMA Additives on Binders Workability and Performance · 2011-10-14 · Effect of WMA Additives on Binders Workability and Performance Hussain U. Bahia, Andrew Hanz and Pouya](https://reader030.fdocuments.us/reader030/viewer/2022040722/5e30d67cd9af69097324a592/html5/thumbnails/2.jpg)
Background and Scope
Warm Mix Additives should improve binders workability without negatively
affecting performance
1. Binder Workability a) Lower Viscosity , b) better Lubricity
2. Binder Performancea) Reduced Aging: could result in less rutting resistance but more
cracking resistance. b) Change adhesion/ Cohesion, as related to moisture resistance.
![Page 3: Effect of WMA Additives on Binders Workability and Performance · 2011-10-14 · Effect of WMA Additives on Binders Workability and Performance Hussain U. Bahia, Andrew Hanz and Pouya](https://reader030.fdocuments.us/reader030/viewer/2022040722/5e30d67cd9af69097324a592/html5/thumbnails/3.jpg)
Methods Used
• Impacts of WMA Additives on Workability– Asphalt Binder Viscosity – Rotational Viscometer– Asphalt Binder Lubricity– New DSR Test
• Binder Performance Impacts– All temperature regimes (HT, IT, LT)– Standard (LVE) and Advanced Test Methods
– Adhesion/Cohesion – Bitumen Bond Strength Test
![Page 4: Effect of WMA Additives on Binders Workability and Performance · 2011-10-14 · Effect of WMA Additives on Binders Workability and Performance Hussain U. Bahia, Andrew Hanz and Pouya](https://reader030.fdocuments.us/reader030/viewer/2022040722/5e30d67cd9af69097324a592/html5/thumbnails/4.jpg)
Impacts of WMA Additives on Workability
![Page 5: Effect of WMA Additives on Binders Workability and Performance · 2011-10-14 · Effect of WMA Additives on Binders Workability and Performance Hussain U. Bahia, Andrew Hanz and Pouya](https://reader030.fdocuments.us/reader030/viewer/2022040722/5e30d67cd9af69097324a592/html5/thumbnails/5.jpg)
Effects on Viscosity – PG64-22Finding: Effect is small and Shear rate is not important
0.10
1.00
10.00
0.10 1.00 10.00 100.00
Visc
osity
[Pa.
s]
Shear Rate [1/s]
PG64-22 Viscosity vs. Shear Rate
PG64 Control
Sasobit - 2%
Surfactant -0.5%
95 C
110 C
130 C
Change in η due to temperature
Change in η due to additive, relatively small.
![Page 6: Effect of WMA Additives on Binders Workability and Performance · 2011-10-14 · Effect of WMA Additives on Binders Workability and Performance Hussain U. Bahia, Andrew Hanz and Pouya](https://reader030.fdocuments.us/reader030/viewer/2022040722/5e30d67cd9af69097324a592/html5/thumbnails/6.jpg)
Conventional Analysis of Friction and Wear – Stribeck Curve
Boundary – Asperities cause friction
Mixed (Partial Contact) –Friction decrease as fluid pushes asperities apart.
Hyrdodynamic (No Contact)– Friction increase due to viscous drag.
Source: “Modern Tribology Text book, 2000.Society of Tribologists and Lubrication Engineers: http://www.stle.org/resources/lubelearn/lubrication/default.aspx#regimes
![Page 7: Effect of WMA Additives on Binders Workability and Performance · 2011-10-14 · Effect of WMA Additives on Binders Workability and Performance Hussain U. Bahia, Andrew Hanz and Pouya](https://reader030.fdocuments.us/reader030/viewer/2022040722/5e30d67cd9af69097324a592/html5/thumbnails/7.jpg)
Asphalt Lubricity Test -How do we test it?
Schematic Fixture for DSR
![Page 8: Effect of WMA Additives on Binders Workability and Performance · 2011-10-14 · Effect of WMA Additives on Binders Workability and Performance Hussain U. Bahia, Andrew Hanz and Pouya](https://reader030.fdocuments.us/reader030/viewer/2022040722/5e30d67cd9af69097324a592/html5/thumbnails/8.jpg)
Asphalt Lubricity Test
• Torque is monitored under constant normal force and speed. The coefficient of friction (μ) is obtained from the normal force and torque measured
– Where: – C = 2.842 – Value of constant for the four ball testing fixture
geometry, T = Torque (N), P = Normal Force (N), d = diameter (m)
![Page 9: Effect of WMA Additives on Binders Workability and Performance · 2011-10-14 · Effect of WMA Additives on Binders Workability and Performance Hussain U. Bahia, Andrew Hanz and Pouya](https://reader030.fdocuments.us/reader030/viewer/2022040722/5e30d67cd9af69097324a592/html5/thumbnails/9.jpg)
Experimental Design - Materials
•Four Warm Mix Additives:One surfactants: (@2 %), One wax-based additive: (2%) Two foaming processes: (0.3% by wt. of mix) and Lab
Foaming (1.5% H2O)
•Two base binders:Unmodified PG64-22 and SBS modified PG 76-22
![Page 10: Effect of WMA Additives on Binders Workability and Performance · 2011-10-14 · Effect of WMA Additives on Binders Workability and Performance Hussain U. Bahia, Andrew Hanz and Pouya](https://reader030.fdocuments.us/reader030/viewer/2022040722/5e30d67cd9af69097324a592/html5/thumbnails/10.jpg)
New Test Method “Asphalt Lubricity Test” –Initial Results – 50 RPM
• Effect of Additive ~-0 to - 10% (PG 64), -10 to -15% (PG76)• Effect of Binder ~-20 to -25%
![Page 11: Effect of WMA Additives on Binders Workability and Performance · 2011-10-14 · Effect of WMA Additives on Binders Workability and Performance Hussain U. Bahia, Andrew Hanz and Pouya](https://reader030.fdocuments.us/reader030/viewer/2022040722/5e30d67cd9af69097324a592/html5/thumbnails/11.jpg)
Effect s on Aggregate Coating
Neat 76-22
40% More coating
T = 30+ degC
![Page 12: Effect of WMA Additives on Binders Workability and Performance · 2011-10-14 · Effect of WMA Additives on Binders Workability and Performance Hussain U. Bahia, Andrew Hanz and Pouya](https://reader030.fdocuments.us/reader030/viewer/2022040722/5e30d67cd9af69097324a592/html5/thumbnails/12.jpg)
Impacts of WMA Additives on Moisture Damage
![Page 13: Effect of WMA Additives on Binders Workability and Performance · 2011-10-14 · Effect of WMA Additives on Binders Workability and Performance Hussain U. Bahia, Andrew Hanz and Pouya](https://reader030.fdocuments.us/reader030/viewer/2022040722/5e30d67cd9af69097324a592/html5/thumbnails/13.jpg)
BBS Testing Apparatus
Graded Scale for Air Flow Control
PATTI Quantum Gold
![Page 14: Effect of WMA Additives on Binders Workability and Performance · 2011-10-14 · Effect of WMA Additives on Binders Workability and Performance Hussain U. Bahia, Andrew Hanz and Pouya](https://reader030.fdocuments.us/reader030/viewer/2022040722/5e30d67cd9af69097324a592/html5/thumbnails/14.jpg)
BBS Stub Geometry
• Rough Surface to prevent interface failure.
• Machined edge to control film thickness.
![Page 15: Effect of WMA Additives on Binders Workability and Performance · 2011-10-14 · Effect of WMA Additives on Binders Workability and Performance Hussain U. Bahia, Andrew Hanz and Pouya](https://reader030.fdocuments.us/reader030/viewer/2022040722/5e30d67cd9af69097324a592/html5/thumbnails/15.jpg)
Data Acquisition SystemAi
r Pre
ssur
e
Time
•Data Acquisition System allows for measurement of force and loading rate.
•Electronic Storage of vs. Time for further analysis.
•Files Transfer to Excel.
http://www.semicro.org/index.asp?PageAction=VIEWCATS&Category=14
![Page 16: Effect of WMA Additives on Binders Workability and Performance · 2011-10-14 · Effect of WMA Additives on Binders Workability and Performance Hussain U. Bahia, Andrew Hanz and Pouya](https://reader030.fdocuments.us/reader030/viewer/2022040722/5e30d67cd9af69097324a592/html5/thumbnails/16.jpg)
BBS Test Description
• Two functions– Characterize the strength of the bond (POTS)– Assess failure mode (cohesive vs. adhesive)
• Offset potential effects of WMA on moisture damage due to production temperature or un-dried aggregates
![Page 17: Effect of WMA Additives on Binders Workability and Performance · 2011-10-14 · Effect of WMA Additives on Binders Workability and Performance Hussain U. Bahia, Andrew Hanz and Pouya](https://reader030.fdocuments.us/reader030/viewer/2022040722/5e30d67cd9af69097324a592/html5/thumbnails/17.jpg)
BBS Test Experimental Design
Factor Levels Description
Binder Grade 2PG 64-22
PG 76-22 (SBS)
WMA Additive Type 2RedisetAdvera
Aggregate Type 2GraniteRhyolite
Conditioning 2Dry
Wet (96 hrs@40 C)
Aggregate Application Temp. 2105 C145 C
![Page 18: Effect of WMA Additives on Binders Workability and Performance · 2011-10-14 · Effect of WMA Additives on Binders Workability and Performance Hussain U. Bahia, Andrew Hanz and Pouya](https://reader030.fdocuments.us/reader030/viewer/2022040722/5e30d67cd9af69097324a592/html5/thumbnails/18.jpg)
Results – Ratio of Wet /Dry StrengthPG 64 Binder
• Effect of Application Temp: Not Important, and some additives improve moisture resistance.
0.40
0.50
0.60
0.70
0.80
0.90
1.00
Control 2% Rediset 8% Advera
Bon
d St
reng
th R
atio PG 64-22 Rhyolite 145C
PG 64-22 Rhyolite 105C
![Page 19: Effect of WMA Additives on Binders Workability and Performance · 2011-10-14 · Effect of WMA Additives on Binders Workability and Performance Hussain U. Bahia, Andrew Hanz and Pouya](https://reader030.fdocuments.us/reader030/viewer/2022040722/5e30d67cd9af69097324a592/html5/thumbnails/19.jpg)
Results – Ratio of Wet /Dry StrengthPG 76 Binder
• Rediset offsets the effect of lower temperature
0.40
0.50
0.60
0.70
0.80
0.90
1.00
Control 2% Rediset 8% Advera
Bon
d St
reng
th R
atio
PG 76-22 Rhyolite 145CPG 76-22 Rhyolite 105C
![Page 20: Effect of WMA Additives on Binders Workability and Performance · 2011-10-14 · Effect of WMA Additives on Binders Workability and Performance Hussain U. Bahia, Andrew Hanz and Pouya](https://reader030.fdocuments.us/reader030/viewer/2022040722/5e30d67cd9af69097324a592/html5/thumbnails/20.jpg)
Impacts of WMA Additives on Asphalt Binder Performance
![Page 21: Effect of WMA Additives on Binders Workability and Performance · 2011-10-14 · Effect of WMA Additives on Binders Workability and Performance Hussain U. Bahia, Andrew Hanz and Pouya](https://reader030.fdocuments.us/reader030/viewer/2022040722/5e30d67cd9af69097324a592/html5/thumbnails/21.jpg)
Comparison of Aging Devices
Aging = f(temp., viscosity)
http://pavementinteractive.org/index.php?title=Image:Rtfo.jpg
• Isolate effects of oxidation.• Procedure Development.
―Calibrated based on equivalency to standard aging method.
―Reduce film thickness to reduce aging time.
RTFOT (Standard) Thin Film Method
Aging = f(temp.)
![Page 22: Effect of WMA Additives on Binders Workability and Performance · 2011-10-14 · Effect of WMA Additives on Binders Workability and Performance Hussain U. Bahia, Andrew Hanz and Pouya](https://reader030.fdocuments.us/reader030/viewer/2022040722/5e30d67cd9af69097324a592/html5/thumbnails/22.jpg)
Evaluation of High Temperature Performance
• Factors Impacting Performance 1. Sensitivity to Aging Temperature: Evaluation of performance
after short term aging at different temperatures.2. Sensitivity to Aging: “Aging Index” – ratio of Aged to Original
Binder Properties.
• Both impacted by: Asphalt Binder Source Presence of WMA Additive
![Page 23: Effect of WMA Additives on Binders Workability and Performance · 2011-10-14 · Effect of WMA Additives on Binders Workability and Performance Hussain U. Bahia, Andrew Hanz and Pouya](https://reader030.fdocuments.us/reader030/viewer/2022040722/5e30d67cd9af69097324a592/html5/thumbnails/23.jpg)
WMA additives can reduce aging Effect is significant for some additives
![Page 24: Effect of WMA Additives on Binders Workability and Performance · 2011-10-14 · Effect of WMA Additives on Binders Workability and Performance Hussain U. Bahia, Andrew Hanz and Pouya](https://reader030.fdocuments.us/reader030/viewer/2022040722/5e30d67cd9af69097324a592/html5/thumbnails/24.jpg)
Sensitivity of Performance Grade to Aging Temperature- PG garde needs adjustment
Chan
ge in
HT g
rade
, ©
![Page 25: Effect of WMA Additives on Binders Workability and Performance · 2011-10-14 · Effect of WMA Additives on Binders Workability and Performance Hussain U. Bahia, Andrew Hanz and Pouya](https://reader030.fdocuments.us/reader030/viewer/2022040722/5e30d67cd9af69097324a592/html5/thumbnails/25.jpg)
Slope of Change in HT Grade vs. Aging Index
![Page 26: Effect of WMA Additives on Binders Workability and Performance · 2011-10-14 · Effect of WMA Additives on Binders Workability and Performance Hussain U. Bahia, Andrew Hanz and Pouya](https://reader030.fdocuments.us/reader030/viewer/2022040722/5e30d67cd9af69097324a592/html5/thumbnails/26.jpg)
Evaluation of Performance – MSCR TestReduced aging could cause less resistance to rutting
Ratio of Jnr=110 C/163C
2.012.481.221.553.001.652.192.35
![Page 27: Effect of WMA Additives on Binders Workability and Performance · 2011-10-14 · Effect of WMA Additives on Binders Workability and Performance Hussain U. Bahia, Andrew Hanz and Pouya](https://reader030.fdocuments.us/reader030/viewer/2022040722/5e30d67cd9af69097324a592/html5/thumbnails/27.jpg)
Fatigue Parameter Results – G*sinδ
• Reduction in G*sinδ indicates that fatigue performance improves with use of Rediset and other WMA additives.
0
1000
2000
3000
4000
5000
PG 64-22Control
PG 64-22+2% RS
PG 64-22+4% SAS
PG 64-22+8% ADV
G*sin
d
PAV 110 PAV 163
![Page 28: Effect of WMA Additives on Binders Workability and Performance · 2011-10-14 · Effect of WMA Additives on Binders Workability and Performance Hussain U. Bahia, Andrew Hanz and Pouya](https://reader030.fdocuments.us/reader030/viewer/2022040722/5e30d67cd9af69097324a592/html5/thumbnails/28.jpg)
Fatigue Parameter Results – G*sinδPG 76 – 22
1000150020002500300035004000450050005500
PG 76-22Control
PG 76-22+2% RS
PG 76-22+4% SAS
PG 76-22 +8% ADV
G*sin
PAV 110 PAV 163
![Page 29: Effect of WMA Additives on Binders Workability and Performance · 2011-10-14 · Effect of WMA Additives on Binders Workability and Performance Hussain U. Bahia, Andrew Hanz and Pouya](https://reader030.fdocuments.us/reader030/viewer/2022040722/5e30d67cd9af69097324a592/html5/thumbnails/29.jpg)
Low Temperature Performance –Estimated S(60)
64-22Neat
64-22 +2Rediset
64-22 +8Advera
64-22 +4Sasobit
76-22Neat
76-22 +2Rediset
76-22 +8Advera
76-22 +4Sasobit
TFA 110 189.0 166.3 187.8 207.9 227.2 184.2 201.8 234.6TFA 163 227.2 184.2 201.8 234.6 245.8 209.5 219.5 258.8
100.0
150.0
200.0
250.0
300.0
S (6
0)
![Page 30: Effect of WMA Additives on Binders Workability and Performance · 2011-10-14 · Effect of WMA Additives on Binders Workability and Performance Hussain U. Bahia, Andrew Hanz and Pouya](https://reader030.fdocuments.us/reader030/viewer/2022040722/5e30d67cd9af69097324a592/html5/thumbnails/30.jpg)
Low Temperature Performance –Estimated m(60)
64-22Neat
64-22+2
Rediset
64-22+8
Advera
64-22+4
Sasobit
76-22Neat
76-22+2
Rediset
76-22+8
Advera
76-22+4
SasobitTFA 110 0.327 0.336 0.328 0.320 0.283 0.317 0.308 0.281TFA 163 0.283 0.299 0.330 0.319 0.262 0.294 0.290 0.272
0.250
0.300
0.350
m (6
0)
![Page 31: Effect of WMA Additives on Binders Workability and Performance · 2011-10-14 · Effect of WMA Additives on Binders Workability and Performance Hussain U. Bahia, Andrew Hanz and Pouya](https://reader030.fdocuments.us/reader030/viewer/2022040722/5e30d67cd9af69097324a592/html5/thumbnails/31.jpg)
Summary of Findings- I
•WMA vary in their effects on binder properties. •Workability & Lubricity
– Marginal reduction in viscosity at 135 C – Better lubricity is detected- could be the main
effect.– Better aggregates coating for most addtives.
![Page 32: Effect of WMA Additives on Binders Workability and Performance · 2011-10-14 · Effect of WMA Additives on Binders Workability and Performance Hussain U. Bahia, Andrew Hanz and Pouya](https://reader030.fdocuments.us/reader030/viewer/2022040722/5e30d67cd9af69097324a592/html5/thumbnails/32.jpg)
Summary of Findings- II
•Binder performance properties– Effects on moisture resistance depends on binder
and additive. – Significant reduction in aging due to lower temps Effects on rutting resistance are not favorable. Need to
consider adjusting PG grade Effects on fatigue resistance could be favorable Effects on thermal cracking resistance are favorable
with the exception of the wax additive.
![Page 33: Effect of WMA Additives on Binders Workability and Performance · 2011-10-14 · Effect of WMA Additives on Binders Workability and Performance Hussain U. Bahia, Andrew Hanz and Pouya](https://reader030.fdocuments.us/reader030/viewer/2022040722/5e30d67cd9af69097324a592/html5/thumbnails/33.jpg)
Thank you for your time!
Authors would like to acknowledge
• The support from the Asphalt Research
Consortium – WRI and FHWA.
• Financial support ofMARC partners
Hussain U. [email protected]