EEE - PG _ Review Report Format
3
<Title of the project> PHASE –II PROJECT REPORT Submitted by: <Name of the student > < Reg.no> Under the Guidance of <Name of the Supervisor with qualification > In partial fulfillment for the award of the degree Of MASTER OF ENGINEERING IN POWER ELECTRONICS AND DRIVES DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING
description
format
Transcript of EEE - PG _ Review Report Format
<Title of the project>
PHASE –II
PROJECT REPORT
Submitted by:
<Name of the student > < Reg.no>
Under the Guidance of
<Name of the Supervisor with qualification >
In partial fulfillment for the award of the degree
Of
MASTER OF ENGINEERING
IN
POWER ELECTRONICS AND DRIVES
DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING
VINAYAKA MISSION’S KIRUPANANDA VARIYAR
ENGINEERING COLLEGE,
VINAYAKA MISSIONS UNIVERSITY: SALEM
JANUARY-2013
The following Contents should be covered in the reviews
Review -1:
Main objective of the Project
Literature Review
Proposed Method
Introduction, Block diagram, Simulation or circuit diagram, Excepted results.
Advantage and Scope of the Project
Review -2:
Main objective of the Project
Proposed Method :
Results Discussion -I
Review -3:
Main objective of the Project
Proposed Method :
Results Discussion -II
Review – 4: (Final Review)
Final Copy of the Report submission in the university format
Note:
Every review report must cover at least 6-10 pages.
