Engineering Data Sheet 767/1June 2003

Boilers

Calorifiers

Radiators

Clyde RMUWMR

ad

iato

r su

pp

ort

sUniversal wall support bracket for FKR, Windsor and Tesi radiators

RMUWM holds the radiator a min. 40 mm off the wallRMUWM is suitable for all Clyde FKR, Windsor and Tesi radiators except F200/250, TC200/5, TC200/6, TC300/5 and TC300/6It is also suitable as a wall stay for all Clyde FKR, Windsor and Tesi radiators using any of the floor mount options, with the exceptions above Refer to EDS 670, 640 or 669 for additional information

Cox LaneChessingtonSurrey KT9 1SLt : 020 8391 2020f : 020 8397 4598e : info@clyde4heat.co.ukw : www.clyde4heat.co.uk

EDS 767/1 June 2003

Clyde Combustions Ltd

This publication is issued subject to alteration or withdrawal without notice. The illustrations and specifications are not binding in detail. All offers and sales are subject to the Company's current terms and conditions of sale, a copy of which is available on request.

RMUWM - Universal Wall Support Bracket

The Universal Wall Support is a screw on bracket system. The support is fitted to the rear radiator column with a clamp arrangement. Fig 1 is an exploded diagram of the components and shows the clamp backplate as used with Tesi radiators. The plate should be reversed for FKR and Windsor radiators.

The UWM body is secured to the wall with either a woodscrew (min size 12, min length 50mm) or a machine screw (M8, max head diameter 14mm). These are not supplied. The clamp backplate is mounted on the slot of the depth adjusting screw, with weight bearing downwards - refer Fig 2. The anti-lift plate is then pushed back to locate on the head of the depth adjusting screw.

Body

Depth adjusting screw

Clamp backplate

Anti-lift plate

Clamphead and M8 screw Fig 1 Exploded diagram of UWM

Fig 2 Clamp backplate located onto depth adjusting screw