EDIT MODE

The HAAS ControlSeries

PRESS

THREE TIMES TO GET TOTHIS PAGE

(Continued onnext slide)

Note:

SLIDE LEGEND

ACTIONS

INSTRUCTIONS

KEYS

INFORMATION

To advance through the presentation

click on your left mouse button

or press <ENTER>.

To exit press <ESC>.

To advance through the presentation

click on your left mouse button

or press <ENTER>.

To exit press <ESC>. OTHER INFORMATION

EDIT MODEThis module is

intended to provide you with a

familiarizationof the Edit Mode on

the Haas Control

Here is where you find the Edit Buttons

Pressing the edit button on the control will display the current program for editing.

You can also use LIST PROGRAMS or MDI/DNC to select a program to edit.

Edit Buttons

EDIT:

INSERT:

ALTER:

DELETE:

UNDO:

Edit Button:

With the program you want to edit selected,

Press <EDIT> to go into

Advanced Editor.

Advanced Editor will be covered as a

separate module.

Press <PRGRM CONVRS>to go into the “Normal”

Edit Mode.(Large Format Edit)

Edit Button:

O91002

HELP

PROGRAM (EDIT) O91002 N00000 F1 KEY TURNS MENU ON/OFF

PROGRAM EDIT SEARCH MODIFY I/O

;

(Mill Engraving HAAS Logo) ;

T1 M06 (TOOL#1 – ENGRAVING TOOL) ;

G90 G54 G00 X-0.7355 Y0.429 ;

S5000 M03 ;

G00 G43 H01 Z1. M08

G01 Z-0.0337 F7. ;

G01 X-0.5687 Y-0.9857 ;

G01 X-0.2275 ;

G01 X0.1314 Y0.2275 ;

G01 X-0.2275 ;

G01 X0.1314 Y0.2275 ;

G01 X-0.7835 ;

G01 X0.1314 Y0.2275 ;

O91002

Insert Button:

Used to move text in the input buffer

into the program after the current cursor

location.

Can also move blocks of code from one

location in a program to another.

In Block Edit (Covered Later) you can select a block of

code from one program and insert it into another program.

Insert Button:

G01

PROGRAM (EDIT) O91002 N00000

G01 Z-0.0337 F7. ;

G01 X-0.5687 Y-0.9857 ;

G01 X-0.2275 ;

G01 X0.1314 Y0.2275 ;

G01 X-0.2275 ;

G01 X0.1314 Y0.2275 ;

G01 X-0.7835 ;

G01 X0.1314 Y0.2275 ;

G01 X0.7835 ;

G01 X-0.5687 Y-0.9857 ;

G01 X-0.2275 ;

G01 X0.1314 Y0.2275 ;

G01 X-0.7835 ;

G01 X0.1314 Y0.2275 ;

G01 X0.7835 ;

G01 X0.3058 Y0.5308 ;

G01

G03 X0.2475 Y0.5508 R0.02 ;

X0.2275

Insert Button:

Used to move text in the input buffer

into the program after the current cursor

location.

Can also move blocks of code from one

location in a program to another.

In Block Edit (Covered Later) you can select a block of

code from one program and insert it into another program.

Insert Button:

G01

PROGRAM (EDIT) O91002 N00000

G01 Z-0.0337 F7. ;

G01 X-0.5687 Y-0.9857 ;

G01 X-0.2275 ;

G01 X0.1314 Y0.2275 ;

G01 X-0.2275 ;

G01 X0.1314 Y0.2275 ;

G01 X-0.7835 ;

G01 X0.1314 Y0.2275 ;

G01 X0.7835 ;

G01 X-0.5687 Y-0.9857 ;

G01 X-0.2275 ;

G01 X0.1314 Y0.2275 ;

G01 X-0.7835 ;

G01 X0.1314 Y0.2275 ;

G01 X0.7835 ;

G01 X0.3058 Y0.5308 ;

G01 X0.2275

G03 X0.2475 Y0.5508 R0.02 ;

Alter Button:

Used to change cursor-selected text to whatever is displayed

in the input buffer.

In Block Edit it can shift a block of code from one place in a program to another.

Alter Button:

G01

PROGRAM (EDIT) O91002 N00000

G01 Z-0.0337 F7. ;

G01 X-0.5687 Y-0.9857 ;

G01 X-0.2275 ;

G01 X0.1314 Y0.2275 ;

G01 X-0.2275 ;

G01 X0.1314 Y0.2275 ;

G01 X-0.7835 ;

G01 X0.1314 Y0.2275 ;

G01 X0.7835 ;

G01 X-0.5687 Y-0.9857 ;

G01 X-0.2275 ;

G01 X0.1314 Y0.2275 ;

G01 X-0.7835 ;

G01 X0.1314 Y0.2275 ;

G01 X0.7835 ;

G01 X0.3058 Y0.5308 ;

G01 X0.2275 ;

G03 X0.2475 Y0.5508 R0.02 ;

X0.7226

Alter Button:

Used to change cursor-selected text to whatever is displayed

in the input buffer.

In Block Edit it can shift a block of code from one place in a program to another.

Alter Button:

G01

PROGRAM (EDIT) O91002 N00000

G01 Z-0.0337 F7. ;

G01 X-0.5687 Y-0.9857 ;

G01 X-0.2275 ;

G01 X0.1314 Y0.2275 ;

G01 X-0.2275 ;

G01 X0.1314 Y0.2275 ;

G01 X-0.7835 ;

G01 X0.1314 Y0.2275 ;

G01 X0.7835 ;

G01 X-0.5687 Y-0.9857 ;

G01 X-0.2275 ;

G01 X0.1314 Y0.2275 ;

G01 X-0.7835 ;

G01 X0.1314 Y0.2275 ;

G01 X0.7835 ;

G01 X0.3058 Y0.5308 ;

G01 X0.2275 ;

G03 X0.2475 Y0.5508 R0.02 ;

X0.7226 ;

Alter Button:

Used to change cursor-selected text to whatever is displayed

in the input buffer.

In Block Edit it can shift a block of code from one place in a program to another.

Alter Button:

G01

PROGRAM (EDIT) O91002 N00000

G01 Z-0.0337 F7. ;

G01 X-0.5687 Y-0.9857 ;

G01 X-0.2275 ;

G01 X0.1314 Y0.2275 ;

G01 X-0.2275 ;

G01 X0.1314 Y0.2275 ;

G01 X-0.7835 ;

G01 X0.1314 Y0.2275 ;

G01 X0.7835 ;

G01 X-0.5687 Y-0.9857 ;

G01 X-0.2275 ;

G01 X0.1314 Y0.2275 ;

G01 X-0.7835 ;

G01 X0.1314 Y0.2275 ;

G01 X0.7835 ;

G01 X0.3058 Y0.5308 ;

G01 X0.2275 ;

G03 X0.2475 Y0.5508 R0.02 ;

X0.7226 :

Alter Button:

Used to change cursor-selected text to whatever is displayed

in the input buffer.

In Block Edit it can shift a block of code from one place in a program to another.

Alter Button:

G01

PROGRAM (EDIT) O91002 N00000

G01 Z-0.0337 F7. ;

G01 X-0.5687 Y-0.9857 ;

G01 X-0.2275 ;

G01 X0.1314 Y0.2275 ;

G01 X-0.2275 ;

G01 X0.1314 Y0.2275 ;

G01 X-0.7835 ;

G01 X0.1314 Y0.2275 ;

G01 X0.7226 ;

G01 X-0.5687 Y-0.9857 ;

G01 X-0.2275 ;

G01 X0.1314 Y0.2275 ;

G01 X-0.7835 ;

G01 X0.1314 Y0.2275 ;

G01 X0.7835 ;

G01 X0.3058 Y0.5308 ;

G01 X0.2275 ;

G03 X0.2475 Y0.5508 R0.02 ;

Alter Button:

To save a program listed in MDI to the

program list.

Type the new program number Onnnnn; (one that is not

already being used) into the input buffer

then Press <ALTER>

Alter Button:

G01

PROGRAM (MDI ) O91002 N00000

G01 Z-0.0337 F7. ;

G01 X-0.5687 Y-0.9857 ;

G01 X-0.2275 ;

G01 X0.1314 Y0.2275 ;

G01 X-0.2275 ;

G01 X0.1314 Y0.2275 ;

G01 X-0.7835 ;

G01 X0.1314 Y0.2275 ;

G01 X0.7226 ;

G01 X-0.5687 Y-0.9857 ;

G01 X-0.2275 ;

G01 X0.1314 Y0.2275 ;

G01 X-0.7835 ;

G01 X0.1314 Y0.2275 ;

G01 X0.7835 ;

G01 X0.3058 Y0.5308 ;

G01 X0.2275 ;

G03 X0.2475 Y0.5508 R0.02 ;

O12345

NOTE:The MDI screen will

go blank , but the program is now in the program list under the number you entered.

Delete Button:

Used to delete the item that the cursor is on.

In Block Edit it can also be used to delete

a block of code in a program.

Can be used to delete entire message on the

message screen.

Delete Button:

G01

PROGRAM (EDIT) O91002 N00000

G01 Z-0.0337 F7. ;

G01 X-0.5687 Y-0.9857 ;

G01 X-0.2275 ;

G01 X0.1314 Y0.2275 ;

G01 X-0.2275 ;

G01 X0.1314 Y0.2275 ;

G01 X-0.7835 ;

G01 X0.1314 Y0.2275 ;

G01 X0.7835 ;

G01 X-0.5687 Y-0.9857 ;

G01 X-0.2275 ;

G01 X0.1314 Y0.2275 ;

G01 X-0.7835 ;

G01 X0.1314 Y0.2275 ;

G01 X0.7835 ;

G01 X0.3058 Y0.5308 ;

G01 X0.2275

G03 X0.2475 Y0.5508 R0.02 ;

Undo Button:

Used to undo up to the last 10 edit changes.

Will Not let you undo anything done in

Block Edit.

In Block Edit you can perform operations on one or more lines in a program. Operations

include: block duplication, block

move & block delete.

Undo Button:

G01

PROGRAM (EDIT) O91002 N00000

G01 Z-0.0337 F7. ;

G01 X-0.5687 Y-0.9857 ;

G01 X-0.2275 ;

G01 X0.1314 Y0.2275 ;

G01 X-0.2275 ;

G01 X0.1314 Y0.2275 ;

G01 X-0.7835 ;

G01 X0.1314 Y0.2275 ;

G01 X0.7226 ;

G01 X-0.5687 Y-0.9857 ;

G01 X-0.2275 ;

G01 X0.1314 Y0.2275 ;

G01 X-0.7835 ;

G01 X0.1314 Y0.2275 ;

G01 X0.7835 ;

G01 X0.3058 Y0.5308 ;

G01 X0.2275 ;

G03 X0.2475 Y0.5508 R0.02 ;

In Advanced Editor Mode Press <F2> to define the beginning

block of program lines, then scroll down and

Press<F2> again to define

the end of the block of lines to edit.

In the 40 column editor Press <F1> to define the beginning of the

block and Press <F2> to define the end of that block to edit.

To get out of block edit, Press <UNDO>

G01

PROGRAM (EDIT) O91002 N00000

G01 Z-0.0337 F7. ;

G01 X-0.5687 Y-0.9857 ;

G01 X-0.2275 ;

G01 X0.1314 Y0.2275 ;

G01 X-0.2275 ;

G01 X0.1314 Y0.2275 ;

>G01 X-0.7835 ;

G01 X0.1314 Y0.2275 ;

G01 X0.7835 ;

G01 X-0.5687 Y-0.9857 ;

G01 X-0.2275 ;

G01 X0.1314 Y0.2275 ;

G01 X-0.7835 ;

G01 X0.1314 Y0.2275 ;

G01 X0.7835 ;

G01 X0.3058 Y0.5308 ;

G01 X0.2275

G03 X0.2475 Y0.5508 R0.02 ;

In Advanced Editor Mode Press <F2> to define the beginning

block of program lines, then scroll down and

Press<F2> again to define

the end of the block of lines to edit.

In the 40 column editor Press <F1> to define the beginning of the

block and Press <F2> to define the end of that block to edit.

To get out of block edit, Press <UNDO>

G01

PROGRAM (EDIT) O91002 N00000

G01 Z-0.0337 F7. ;

G01 X-0.5687 Y-0.9857 ;

G01 X-0.2275 ;

G01 X0.1314 Y0.2275 ;

G01 X-0.2275 ;

G01 X0.1314 Y0.2275 ;

G01 X-0.7835 ;

G01 X0.1314 Y0.2275 ;

G01 X0.7835 ;

G01 X-0.5687 Y-0.9857 ;

>G01 X-0.2275 ;

G01 X0.1314 Y0.2275 ;

G01 X-0.7835 ;

G01 X0.1314 Y0.2275 ;

G01 X0.7835 ;

G01 X0.3058 Y0.5308 ;

G01 X0.2275

G03 X0.2475 Y0.5508 R0.02 ;

In Advanced Editor Mode Press <F2> to define the beginning

block of program lines, then scroll down and

Press<F2> again to define

the end of the block of lines to edit.

In the 40 column editor Press <F1> to define the beginning of the

block and Press <F2> to define the end of that block to edit.

To get out of block edit, Press <UNDO>

G01

PROGRAM (EDIT) O91002 N00000

G01 Z-0.0337 F7. ;

G01 X-0.5687 Y-0.9857 ;

G01 X-0.2275 ;

G01 X0.1314 Y0.2275 ;

G01 X-0.2275 ;

G01 X0.1314 Y0.2275 ;

G01 X-0.7835 ;

G01 X0.1314 Y0.2275 ;

G01 X0.7835 ;

G01 X-0.5687 Y-0.9857 ;

G01 X-0.2275 ;

G01 X0.1314 Y0.2275 ;

G01 X-0.7835 ;

G01 X0.1314 Y0.2275 ;

G01 X0.7835 ;

G01 X0.3058 Y0.5308 ;

G01 X0.2275

G03 X0.2475 Y0.5508 R0.02 ;

Prepared by Haas AutomationTraining DepartmentOxnard, CA 93030