Edge banding machines Ambition 1650 - 1680...02 Ambition 1650-1680 b c d a e Ambition 1650-1680 b c...
Transcript of Edge banding machines Ambition 1650 - 1680...02 Ambition 1650-1680 b c d a e Ambition 1650-1680 b c...
-
Edge banding machinesAmbition 1650 - 1680
05
/11
cre
ativ
des
ign
BRANDT Kantentechnik GmbHWeststraße 232657 LemgoGermanyTel. +49 5261/974-0Fax +49 5261/[email protected]://www.brandt.de
A member of the Homag Group of Companies
Intelligent woodworking solutions
Ambition_1600 17.05.11 08:52 Seite 16
-
02 Ambition 1650-1680
b
c
d
a
e
Ambition 1650-1680
bcd
amm
e
03
8 - 60 (option 80)0,4 - 12 (option 15)
65 (option 85)max. 30
min. 70
HOMAG GroupSuccess through partnership
"With us, you and your
products come first.
A promise that you can
count on!"
To survive in a fiercely competitive market, a company has to have fast, flexible and efficient production.
The HOMAG Group, with its sales and service network in over 90 countries around the world, offers you and
your employees a strong partnership no matter where you are.
BRANDTPerfect edges for demanding customers
We offer our customers innovative and powerful edgebanding machines. Efficiency and quality have the
highest priority, and ensure long-term competitive advantages for you. With an annual production of over
2000 edgebanding machines, we are the edgebanding specialist in the HOMAG Group and the world leader
in our market segment.
"Ideally prepared for your requirements"
construction, sanding technology, auto -mation systems, packaging equipmentand software. We provide a complete andinnovative range of products and servicesthat are always the perfect solution for anyrequirement.You, our customers, benefit from high precision, performance and cutting-edgetechnology.
A high degree of standardization in com-bination with an advanced manufacturingprocess and more than 50 years of engi-neering experience ensure state of the art quality at a superbprice-performance ratio. Our clear andstructured product range is designed to
meet the demands of current and futuremarket trends.All of our developments are focused toward practically-oriented and economicsolutions that guarantee you the bestpossible production results.
Coil Strips Solid
The HOMAG Group of companies cover all areas of woodworking and wood-processing. Panel sizing, sawing, edge technology,transportation technology and handlingsystems are just a few of our specialties.We also offer solutions for drilling, coatingtechnology, surface technology, plants for doors and doorframes, timber house
Ambition_1600 17.05.11 08:52 Seite 2
-
04 Ambition 1650-1680 05Ambition 1650-1680
Ambition 1650 FC
Ambition 1650 C - 1680 FCUSetting new standards in performance and quality
In the standard version, the machine is equipped with a precision gluing unit, a tiltable end trimming unit,
a multifunctional top/bottom trimming unit and a contour trimming unit. A perfect finish is guaranteed by the
radius scraper and a buffing unit.
The powerful motors on all of the unitsprovide the unrestricted power that isneeded to process a broad spectrum ofdifferent parts.To offer the perfect solution every time,there is a joint trimming unit, a tiltablegrooving unit, an universal trimming unitas well as a glue joint scraper available. With the optional Quickmelt gluing unit,
plus the optional workpiece gap optimi-zation package for more effective pro-duction, and also the available separationand detergent agents, this range is opti-mally-equipped for all requirements. The versatility of this series is highlightedby the variable feed rate of 8-18 m / min.
The right solution for your requirementsThe Ambition 1600 series machine leaves nothing lacking.Wether your needs are "batch size one"production, for demanding bespokeshop fitting applications, living & bed -room furniture or functional office furniture, the Ambition 1600 Series always offers the right solution for yourrequirements.
Ambition_1600 17.05.11 08:52 Seite 4
-
07Ambition 1650-168006 Ambition 1650-1680
Through targeted and constant development of controller technology, simple operation and a high operating
comfort are guaranteed. At BRANDT we focus on you as our customer and your finished product.
PowerControl PC 20+, offering every "plus" for the customer
+ Optimum overview by using an easy to view 12" screen
+ High operator comfort with all functi-ons button-controlled from the opera-ting panel
+ Short set up times, through high con-troller capacity and easy selection of processing programs
+ Self-explanatory operator guidance,through a graphic interface and opti-mum visualisation
Compilation of production data via the BRANDT-Browser
Compiled production data can be easily gathered and saved. The BRANDT-Browser allows for job-specific collection of opera-ting hours, an overview of the total processed workpieces andinformation regarding total meters of processed edges. For companies that have large numbers of different clients, it isespecially advantageous to always have an accurate record ofcontract-related costs.
Context-sensitive help
With the context-sensitive help function, it is possible to directlydisplay detailed information on the operations and functions of themachine. The controller-integrated help functions are accessible with thepush of a button from the keyboard and allow for immediate operator support.
+ Network-compatible+ Context-sensitive help - detailed infor-
mation about the functions and how tooperate the machine directly on thescreen
+ Compilation of production data for de-tailed gathering of job related costs
The controller – Quality and precision with the touch of a button
Easy Back-up function of the entire control and all operator programs
Teleservice reduces field servicework operations
• Reduction of service cost• Avoidance of an unscheduled machine
downtime• Specific scheduling of field service
work + spare parts• Support to maintenance and operation
staff
Ambition_1600 17.05.11 08:52 Seite 6
-
0908 Ambition 1650-1680 Ambition 1650-1680
Radiant heater
Strong adhesion through optimal pre heating of the workpiece..
Infeed stop
For minimum workpiece spacingand safe operation.
Rough trimming unit
For rough trimming of all common edgebanding materials.
Standard Gluing Unit
Quickly changeable application unit.Glue reservoir underneath the glue roller.Processing of granulated PU glue is possible.
Joint trimming unit
Perfect cut and high operating life due to diamond tipped tools for an optimumedge joint quality..
Trimming unit
Trimming unit with DFC (Dust Flow Control)tooling technology for optimal extraction.Optional pneumatic or servo axis adjust-ment available.
End trimming unit
Perfect cutting by the end trimming unit using rigid high-precision linear guides and the workpiece gap optimization(optional) package to achieve higher output in the sameprocessing time. Soft-touch for optimal end trimming results even at high speeds..
Automatic edge infeed device (optional)
Automatic edge infeed device for fast changeover between different coiled materials.
V-belt top pressure (optional)
Top pressure V-belt system optionally avail able instead of the standard top pressure roller system.
Pressure zone
Heavy pressure zone(up to 15 mm) toensure an optimumglue joint quality.
Magazine + pre-melter (optional)
Coil and automatic strip magazine with opticalmonitoring for reliable material supply, highavailability and perfect glue quality via theQuickmelt gluing unit.
Significant competitive advantages – Pace setting performance and quality
Ambition_1600 17.05.11 08:52 Seite 8
-
11Ambition 1650-168010 Ambition 1650-1680
Significant competitive advantages – Pace setting performance and quality
Multifunctional trimming unit (optional)
Trimming of the edge overhang on top and bottom side as well ascontour trimming on the front and rear edges. Equipped with anautomatic adjustment to switch between thick and thin edges.Workpiece thickness up to 60 mm.
Glue joint scraping unit (optional)
For the perfect finish..
Universal trimming unit
Universal unit with high capacity forgrooving and profiling work. Flexible by unlimited setting options..
Corner rounding unit
For corner rounding of thick PVC edges, as wellas postforming and softforming profiles. Equipped with automatic adjustment betweenthin and thick edge materials. Workpiece thickness up to 60 mm.
Profile scraping unit
Unit to smooth radii or chamfers, equipped with quick change headsfor fast profile change.
Tiltable grooving unit
For grooving work pieces either from the bottomside or from the edge side. It is possible to do eithercontinuous grooving or non continuous grooving, as well as jump grooving for biscuit joints..
Buffing unit
Buffing unit to polishedges and maintaintheir natural colour.
Spraying unit (optional)
Separation and detergent agents for a perfect finish when processing PU-glue.
Central lubrication unit
Fully automatic lubrication of the feed trackguidance system to guarantee precisionand a long-life time of the conveyor chain.
Nesting package (optional)
Includes a multi-roller tracing device for thetrimming and scraping units to compensatefor hinge holes.
Ambition_1600 17.05.11 08:52 Seite 10
-
13Ambition 1650-168012 Ambition 1650-1680
The new gluing generation –glue application as a system
QA 45 – EVA
• EVA pre-melting unit for hot melt glues• Filling capacity approx. 4 ltrs. granulated
hot melt glue
QA 45 – PU & EVA
• PU and EVA pre-melting units withtraversing device
Due to today's variety of products and increasing customers' demands it has become necessary to focus
on a future-oriented gluing technique. The new glue application system QA 45 meets all market requirements
and offers excellent solutions for a modern interior shop or furniture production companies.
Program controlled metering, quick changeof glue and easy maintenance by means ofthe PC 20+.
The ideal solution for each application
Application unit QA 45 (optional)
• Special coating of the gluing unit for alltypes of glue, including PUR in orderto meet all customers' requirements.
• Easy and fast change over of differenttypes of glue through an automaticdraining system, in oder to make useof the ideal glue type or colour basedon application.
• The automatic cleaning system is acti-vated by the PC 20+ control, in order tominimize the downtime of the machine.
• Glue amount infinitely adjustable byservo motor in order to achieve a per-fect result for most different workpiecematerials.
• Glue application in both directions,synchronism and antirotation for a perfect adhesion of different edge materials.
QA 45 – Manual
• The application unit is filled by hand either with granulated glue, or, with glueslugs
• Flexible application of different hot meltadhesives, like EVA, PU or Polyolefinebased glue or different glue colours
QA 45 – PU
• PU pre-melting unit• Chemcoat antioxidation coating of the
glue melting container.• Container size: 2 kg slugs
QA 45 – EVA 2
• 2 Quick Melt pre-melting units with traversing device for hot melt glues
• Filling capacity approx. 4 ltrs. granulatedhot melt glue per melting unit
Ambition_1600 17.05.11 08:52 Seite 12
-
15Ambition 1650-168014 Ambition 1650-1680
Ambition 1650 C Ambition 1650 FC Ambition 1660 FC Ambition 1660 FGC Ambition 1660 F2C Ambition 1680 FCU
Ambition 1660 F2C
Ambition 1660 FGC
Ambition 1680 FCU
Ambition 1650 FC
Ambition 1650 C
Ambition 1660 FC
Corner rounding unit
For corner rounding of thickPVC edges, as well as post-forming and softformingprofiles. Equipped with automaticadjustment between thinand thick edge materials.Workpiece thickness up to 60 mm.
Technical Data
Type of machine
All rights for technical changes withheld. Individual machine pictures may show options.
Machine dimensionsMachine length (mm) 5760 5760 6260Working height (mm) 950 Machine dimensions WxH (mm) 1555 x 2300 Working dimensions Workpiece thickness (mm) 8 - 60 (option 80) Edge material thickness (mm) 0,4 - 12 (option 15) 0,4 - 12 (option 15) 0,4 - 12 Miscellaneous Feed speed (m/min) var. 8 - 18 (option 8 - 20) Weight (kg) 2540 2600 3000Connected value (kW) 16 20 21Extraction diameter (mm) 2x100 1x120/2x100 1x120/1x180/1x100Electrics 400 V - 3 Ph. - 50 Hz. Pneumatics (bar) 6
Type of machine
Machine dimensionsMachine length (mm) 6260 6260 7260Working height (mm) 950 Machine dimensions WxH (mm) 1555 x 2300 Working dimensions Workpiece thickness (mm) 8 - 60 (option 80) Edge material thickness (mm) 0,4 - 12 (option 15) 0,4 - 15 0,4 - 12 Miscellaneous Feed speed (m/min) var. 8 - 18 (option 8 - 20) Weight (kg) 3000 3000 3600Connected value (kW) 24 22 27Extraction diameter (mm) 1x120/1x140/1x100 1x120/1x160/1x100 1x120/1x200/1x100Electrics 400 V - 3 Ph. - 50 Hz. Pneumatics (bar) 6
Ambition_1600 17.05.11 08:53 Seite 14