eDesignSuite - Release Note - STMicroelectronicsThe tool has a responsive UI and supports...
Transcript of eDesignSuite - Release Note - STMicroelectronicsThe tool has a responsive UI and supports...
Release Note
October 2019 eDesignSuite 9.2.0 1/16
eDesignSuite
Release 9.2.0
1. Preface
1.1. About this release note
This document is the release note for the eDesignSuite version 9.2.0
2. What’s new
DC/DC designs with L672x and L673x controllers and photovoltaic
design application through SPV1040 are now available with a native
HTML web application, without the need of Flash player plugin.
ST Schottky&FERD eTool new version (2.3) with updated database
info.
416 Schottky Barrier diodes
39 Field Effect diodes
3. Supported Devices
3.1. Power Supply devices in Power Conversion group
DC/DC
Non Isolated
Buck:
- ST1Sx: ST1S03, ST1S03A, ST1S06, ST1S06A, ST1S06XX12,
ST1S06XX33, ST1S09, ST1S10, ST1S12XX, ST1S12XX12, ST1S12XX18,
ST1S14, ST1S31, ST1S32, ST1S40, ST1S41, ST1S50, AST1S31HF
- L598x: L5980, L5981, L5983, L5985, L5986, L5986A, L5987,
L5987A, L5988D, L5989D
2/16 eDesignSuite 9.2.0
- x597x: L5970D, L5970AD, L5972D, L5973D, L5973AD, A5970D,
A5970AD, A5972D, A5973D, A5973AD, B5973D, A5974D,
A5974AD, A5975D, A5975AD
- L497x: L4971, L4971D, L4973D3.3, L4973D5.1, L4973V3.3,
L4973V5.1, L4976, L4976D
- x6902D: A6902D, L6902D
- x698x: L6986, A6986, A6986F, A6986F5V, A6986F3V3, L6986F,
A6985F, A6985F5V, A6985F3V3, L6984, L6985F
- x798x: L7980, L7980A, L7981, L7981A, A7985A, L7985, L7985A,
A7986A, L7986A, L7986, L7987, L7987L, A7987
- PM89xx: PM8903A, PM8906, PM8933
- PM66xx: PM6644, PM6670S, PM6670AS
- L672x: L6725, L6725A, L6726A, L6727, L6728AH, L6728D, A6727
- L673x: L6730, L6730B, L6731D, L6732, L6738, L6738A
Multi output Buck:
- PM6641, PM6680, PM6680A
- L5963
Boost:
- ST8R00W
Buck-Boost:
- STBB1-APUR, STBB2JAD-R
- L7980, L7980A, L7981, L7981A, L7985, L7985A, A7985A, L7986,
L7986A, A7986A, L7987, L7987L, A7987
Inverting Buck-Boost:
- L7980, L7980A, L7981, L7981A, L7985, L7985A, A7985A, L7986,
L7986A, A7986A, L7987, L7987L, A7987
Isolated
Flyback:
VIPer17, VIPer27, VIPer28, VIPer37, VIPer38
AC/DC
PFC Pre-regulation
L4984D, STNRGPF0, STNRGPF12
Isolated
Fixed Frequency Flyback:
- VIPer06, VIPer16, VIPer17, VIPer26, VIPer27, VIPer28, VIPer37,
VIPer38, VIPer0P, VIPer01, VIPer11, VIPer26K, VIPer122
Quasi Resonant Flyback:
- ALTAIR05T-800, ALTAIR04-900, L6566B, L6566BH, HVLED001,
STCH02, STCH03
Non Isolated
Buck:
- VIPer06, VIPer16, VIPer26, VIPer0P, VIPer01, VIPer11, VIPer26K,
VIPer122
eDesignSuite 9.2.0 3/16
Fixed Frequency Flyback:
- VIPer06, VIPer16, VIPer26, VIPer0P, VIPer01, VIPer11, VIPer26K,
VIPer122
3.2. Power Supply devices in Photovoltaic group
Solar Battery Charger
SPV1040
Power Optimizer
SPV1020
3.3. Power Supply devices in Battery Charger group
AC/DC
ALTAIR05T-800, ALTAIR04-900, VIPer17, VIPer27, VIPer28, VIPer37,
VIPer38
DC/DC
Solar Battery Charger
SPV1040
3.4. Led Lighting
Led Driving
DC/DC
ST1CC40, LED2000, LED2001, LED5000, LED7708, LED6000,
LED6001, ALED6001
x597x: L5970D, L5970AD, L5972D, L5973D, L5973AD, A5970D,
A5970AD, A5972D, A5973D, A5973AD, B5973D
AC/DC
HVLED805, HVLED807PF, HVLED815PF
VIPer17, VIPer27, VIPer28, VIPer37, VIPer38
HVLED001
4. Release Information
4.1. About major previous release
Release 9.1.0: September 2019
DC/DC designs with 597x, 497x, 698x, ST1Sxx family devices are now
available through a native HTML web application, without the need
of Flash player plugin.
4/16 eDesignSuite 9.2.0
Release 9.0.0: August 2019
DC/DC designs with 798x and 598x family devices in all topologies
are now available through a native HTML web application, without
the need of Flash player plugin.
Release 8.15.0: June 2019
Design of AC/DC not isolated buck converters with new VIPer26K IC.
Design with new VIPer122 device in buck and flyback topologies.
ST Schottky&FERD eTool new version with updated database info.
Release 8.14.0: April 2019
Added new solution based on STNRGPF12 device that allows to
realize a CCM IPFC controller with digital inrush current control.
New release for Antenna design application with various
improvements.
Release 8.13.0: March 2019
Design of AC/DC isolated flyback converters with VIPer11 devices.
Design of AC/DC isolated and not isolated flyback converters with
new VIPer26K IC.
Release 8.12.0: February 2019
Antenna design module is now accessible even from mobile and
tablet devices as responsive web app.
Release 8.11.0: January 2019
Design of AC/DC not isolated flyback converters with new VIPer11
devices.
Release 8.10.0: December 2018
Released AC Switch Selector which allows to select the best AC
Switch according to initial customer high level request. The tool for
each solution calculates the junction temperature according to the
selected heatsink, and gives information on blocking capability and
schematic. The tool has a responsive UI and supports Progressive
Web Application standard.
Design of floating boost DC/DC LED drivers with LED5000 device.
Release 8.9.3: November 2018
VIPerx6 isolated flyback designs now support primary side regulation
eDesignSuite 9.2.0 5/16
Release 8.9.1: October 2018
ST Schottky&FERD eTool (formerly “ST Diode Selector”) new and
improved version:
Updated database info
Bugs fix
Improved IF range management
Release 8.9.0: October 2018
Design of DC/DC buck applications with L6985F and A6727 devices.
Bug fixes and improvements.
Release 8.8.0: July 2018
Design of AC/DC low standby offline quasi-resonant flyback
converters with STCH02 and STCH03 PWM controllers capable of
providing constant output current (CC) regulation using primary
sensing feedback.
Bug fixes and improvements.
Release 8.7.0: June 2018
Design of floating buck-boost DC/DC LED drivers with A/LED6001
devices.
Release 8.6.1: June 2018
New look and feel for main console and specification module.
Release 8.6.0: May 2018
Design of AC/DC buck converters with new VIPer11 devices.
Release 8.5.1: April 2018
Improved efficiency calculation in positive buck-boost DC/DC
converters.
Added the schematic in automotive DC/DC design with L5963.
Release 8.5.0: March 2018
Improved stability in VIPer buck designs.
Design of positive buck-boost DC/DC converters with L7987/L
devices.
6/16 eDesignSuite 9.2.0
Release 8.4.0: February 2018
Preliminary design for DC/DC automotive multi-output buck
applications with L5963 IC
Release 8.3.0: February 2018
ST Schottky&FERD eTool (formerly “ST Diode Selector”) new and
improved version:
New Database with more fields
369 Schottky Barrier diodes
38 Field Effect diodes
new filter criteria "Cross Search"
Improvement Power losses analysis by the “branch” concept.
Internationalization feature by supporting English and Chinese
languages
Improvement of initial loading
Launching the tool by a URL with a query string
STNRGPF01 IPFC – Digital design: improved version that supports new
firmware revision 1.2
Release 8.2.0: February 2018
Extended to VIPer01/0P isolated and not isolated flyback wizard
designs the integration of the Smart Transformer Selector (STS) service
from Wurth Electronics Midcom:
It enables the possibility to identify a commercial transformer that
best fits the design specifications and automatically to build a
solution around it.
Improved support to flyback parameters identification and
validation in the context of all flyback designs based on VIPerPlus ICs
series.
Release 8.1.0: July 2017
Design of AC/DC isolated flyback converters with VIPer0P and
VIPer01 devices.
Design of inverting (negative) buck-boost DC/DC converters with
L798x family devices.
CCM IPFC controller with STNRGPF01 device:
eDesignSuite 9.2.0 7/16
Inserted new over current protection Hardware Circuit which a
current sensing in each interleaved channel.
Inserted new Software parameter to support Firmware version 1.1.0
Bugs fixing (Load connection). Added new software parameter in
order to control duty cycle in unload condition and control Relay
response time.
Release 8.0.0: March 2017
Thanks to STMicroelectronics' partnership with Wurth Electronics
Midcom, eDesignSuite integrates the Smart Transformer Selector (STS)
service:
Automatically displays the Wurth Electronics Midcom transformer
part numbers that are best tailored to your design specifications
Shows the technical criteria used for the proposed products (for
example, having the lowest losses)
Displays the main transformer data
Indicates the real design specifications based on the selected
transformer
At the moment this feature is available in all VIPerx6, VIPerx7 and
VIPerx8 isolated and not isolated flyback designs that allow to
generate power converters, LED drivers and battery chargers
applications.
Design of CCM IPFC controller with new STNRGPF01 device.
Release 7.11.1: February 2017
eDesignSuite home page and the specification module are
completely accessible even for anonymous and not registered users.
Custom diode or MOSfet will be available not only in the project, but
in all the projects within eDesignSuite.
Release 7.11.0: February 2017
Design of AC/DC not isolated flyback converters with VIPer01
devices.
Design of LED DC/DC positive buck-boost drivers with LED6000 IC.
Added Wurth Elektronik capacitors.
Release 7.10.1: December 2016
Design of AC/DC buck converters with VIPer01 devices.
Design of DC/DC buck converters with L6984 IC.
Improvements of VIPer flyback and buck designs.
8/16 eDesignSuite 9.2.0
Release 7.10.0: September 2016
Design of AC/DC non isolated flyback converters with VIPer0P
devices.
Design of AC/DC HPF QR flyback converters with HVLED001/A ICs.
In transformer design added new cores and wires from Wurth
Elektronik
Diodes selector database updated.
Release 7.9.1: May 2016
Design of LED DC/DC drivers with LED6000 in floating boost and
inverting buck-boost topologies.
Diodes selector database updated.
Release 7.9.0: April 2016
Design of DC/DC buck converters with A6985F devices.
Design of AC/DC buck converters with new VIPer0P ICs.
Design of HPF QR flyback LED driver applications with HVLED807PF,
HVLED815PF and HVLED001A.
Release 7.8.0: December 2015
Design of DC/DC buck converters with L6986F and AST1S31HF
devices.
Improved compensation net design in VIPerx6 AC/DC buck
applications.
New module to properly select, filter and compare ST diodes.
Release 7.7.0: July 2015
Design of DC/DC buck converters with A6986F devices.
Release 7.6.0: June 2015
Design of LED DC/DC buck drivers with LED6000.
Added in DC/DC buck module for ST1S50 design the support for DCM
and burst mode.
Bug fixes.
Release 7.5.0: May 2015
Design of LED AC/DC High Power Factor QR flyback applications
with HVLED001.
Design of LED DC/DC boost drivers with LED7708.
Added in the clamper net design the possibility to use STRVS (ST
Repetitive Voltage Suppressor) transils.
eDesignSuite 9.2.0 9/16
New module to design inverting, non-inverting and Window
comparators.
New module to design low side current sensing configuration with
operation amplifiers.
Release 7.4.0: March 2015
Design of AC/DC isolated flyback applications with new VIPer37 and
VIPer38 part numbers.
In transformer design added support for core and wires from Wurth
Elektronik.
Release 7.3.0: February 2015
Design of DC/DC buck applications with ST1S50 and buck-boost with
x798x family devices
Output divider manual refinement in almost all DC/DC designs.
Release 7.2.0: October 2014
Design of DC/DC buck applications with L7987, L7987L, L6986 and
A6986 devices
Improved design of AC/DC LED driver applications with HVLED805,
HVLED807PF and HVLED815PF devices
Improved design AC/DC converter applications with ALTAIR05T-800
and ALTAIR04-900 devices
Release 7.1.0: February 2014
New application tree structure
New design module for RF Antenna Design
Added support for PFC Pre-regulation with L4984D device
Release 7.0.0: October 2013
Added devices:
LED DC/DC Buck
LED5000
Added new design module for Filter < 50MHz
Release 6.5.1: August 2013
MOSFETs database update.
Minor Bug fixes.
Release 6.5.0: June 2013
Added devices:
10/16 eDesignSuite 9.2.0
STBB2 DC/DC Converter
Minor Bug fixes.
Release 6.4.0: March 2013
Added devices:
PM8903A, PM8933, PM8906, PM8907 DC/DC Converters
A5974 and A5975 DC/DC Converters
LED2001 DC/DC LED Driver
Release 6.3.0: October 2012
Added DC/DC converter.
DC/DC Buck-boost
STBB1
Bug fixes about capacitor selection in QR flyback applications and improved transformer design.
Release 6.2.0: September 2012
Added DC/DC converter.
DC/DC Buck
PM6644
Added AC/DC LED Driver.
AC/DC QR Flyback
HVLED807PF, HVLED815PF
Added DC/DC LED drivers solutions.
LED DC/DC Buck
LED2000
Added DC/DC Photovoltaic Power Optimizer.
DC/DC Boost
SPV1020
Release 6.1.1: April 2012
Added AC/DC Converters.
Isolated Fixed-Frequency Flyback off-line converters
VIPer37 family ICs.
Added DC/DC controllers.
eDesignSuite 9.2.0 11/16
DC/DC Buck
L6738, L6738A
Added DC/DC Converters.
DC/DC Buck
ST1S31, ST1S32
Release 6.0.0: March 2012
Added AC/DC Converters.
Non isolated Fixed-Frequency Flyback and Buck off-line converters
VIPer06 family ICs.
Added DC/DC multi-output controllers.
DC/DC Buck
PM6680, PM6680A, PM6641, PM6670S, PM6670AS
Added DC/DC Converters.
DC/DC Buck
A7985A, L7985A, L7985, A7986A, L7986A, L7986
ST1S40, ST1S41
Release 5.0.0: October 2011
Added AC/DC Converters.
Quasi Resonant Flyback PWM Controllers
L6566B and L6566BH ICs.
Added AC/DC Battery Chargers.
AC/DC Isolated Quasi Resonant Flyback
ALTAIR05T-800 and ALTAIR04-900
Added DC/DC Converters.
Buck
ST1S14.
Release 4.0.0: September 2011
Added Photovoltaic solutions.
Battery Charger
SPV1040 IC.
Added AC/DC LED drivers solutions.
LED AC/DC
Quasi Resonant Flyback
12/16 eDesignSuite 9.2.0
- HVLED805.
Release 3.0.0: April 2011
Added DC/DC LED drivers solutions.
LED DC/DC
Buck
- ST1CC40
- L597x (L5970D, L5970AD, L5972D, L5973D, L5973AD)
- A597x (A5970D, A5970AD, A5972D, A5973D, A5973AD)
Added AC/DC LED drivers solutions.
LED AC/DC
Isolated Flyback
- VIPer17, VIPer27, VIPer28.
Added Full Page Schematic viewer
Application viewport size selection
Minor changes
Release 2.1.0: December 2010
Added DC/DC drivers and Step down solutions.
DC/DC
Buck
- L7980 and L7981 ICs .
Step Down controllers
L6725, L6725A, L6731D, L6732
Minor changes.
Fixed a bug on AC/DC flyback topologies; the calculation of the
transformer’s specifications was wrong.
Release 2.0.0: October 2010
Added AC/DC drivers and Step down solutions.
AC/DC
Isolated Flyback
- VIPer17, VIPer27, VIPer28 ICs .
Non Isolated Buck and Flyback
- VIPer16, VIPer26 ICs.
Step Down controllers
First release version for L6730x ICs family.
Added “Cadence® PSpice®” exporter
Supported products: x597x and L598x
New Application Structure and Wizard
Specific Modules according to application Type and Topology:
eDesignSuite 9.2.0 13/16
DC/DC
Non Isolated
- Boost
- Buck
Isolated
- Flyback
AC/DC
Non Isolated
- Buck
Isolated
- Flyback
Added the possibility to run multiple, independent and comparable
designs based on different ICs.
Release 1.5.6: Apr 2010
Program features:
Added new demos for controllers ICs.
Changes in application architecture and graphical appearance.
Release 1.5.5: Feb 2010
Step Down topology
ICs families added:
L672x (L6726A, L6727, L6728AH, L6728D)
Low voltage POWER MOSFETs selector for synchronous rectifier
and switching MOSFET in controllers design
Release 1.5.4: Jan 2010
Step Down topology
ICs families added:
ST1Sx (ST1S03, ST1S03A, ST1S03AI, ST1S06, ST1S06A, ST1S09,
ST1S09A, ST1S09I, ST1S10, ST1S12)
L598x (L5980, L5981, L5983, L5985, L5986, L5986A, L5987, L5987A,
L5988D, L5989)
Actuals view: added the monitoring of Vin ripple due to Cin size.
Improved Cin selection based on Vin ripple measurement
Improved Cout selection based on the worst Vout overshoot. The
value is calculated considering the complete transfer of inductor
stored energy to Cout when a full load is suddenly removed from
the output.
14/16 eDesignSuite 9.2.0
Step Up topology:
ICs families added:
ST8R00W
Design improvement
Design engines updated to take into account the Ceramic
capacitor capacitance change due to Vdc biasing.
Updated the user interface for the power component selection
(capacitor, diodes, inductors)
Inductor DB (Coilcraft portfolio update)
Capacitor DB (TDK and Panasonic ceramic portfolio update).
Richer collection of build in examples (coming with the tool refers to
an existing ST evaluation board).
Release 1.4.0: Aug 2009
Program features:
Import/Export from file.
Updated the user interface for the power component selection
(capacitor, diodes, inductors)
Release 1.3.4: Jun 2009
Step Down topology ICs families supported:
L597x (L5970D, L5970AD, L5972D, L5973D, L5973AD)
A597x (A5970D, A5970AD, A5972D, A5973D, A5973AD)
L497x (L4971, L4973, L4976)
L6902D
A6902D
B5973D
Program features:
Fully annotated & interactive Schematic
Interactive BOM
Simulation, Efficiency, Losses and Stability Diagram presented at a
different system operating conditions.
Design customization adjusting additional requirements and/or
changing suggested power components (capacitor, diodes,
inductors)
Printable solution design report
eDesignSuite 9.2.0 15/16
Project Load and Save in a private user area accessible only
through the eDesignSuite tool
5. Problems and Limitation
The PSpice Export for the L598x Family products is compatible with the
Demo Capture OrCAD Setup released in June 2011.
16/16 eDesignSuite 9.2.0
Please Read Carefully:
Information in this tool is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this tool, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted under this tool. If any part of this tool refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this tool shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2019 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy -
Japan - Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com