EDELSTAHL-HANDLAUF SM-100 -steckbar - … · Typ / Type SM-100 (Steckmuffen) SM-100 (bushings to...
Transcript of EDELSTAHL-HANDLAUF SM-100 -steckbar - … · Typ / Type SM-100 (Steckmuffen) SM-100 (bushings to...
Typ / Type SM-100 (Steckmuffen) SM-100 (bushings to combine)
Werkstoffe/
Materials
1.4301 geschliffen AISI 304 satinated
AusführungFinish
Edelstahl geschliffen, auf Wunsch Edelstahl poliert/Edelstahl poliert titanium-beschichtet oder hairline titanium-beschichtet.
stainless steel satinated, at request stainless steel polished,stainless steel polished titanium-coated or hairline titanium coated.
Best.-Nr.Order-No.
Art.-Nr.Art.-No. Benennung Specification
100/1 1074 Handlauf-Rohr Ø 40 mm x 2 mm handrail-tube Ø 40 mm x 2 mm
100/2 1086 Mittelstütze Ø 44 mm middle support Ø 44 mm
100/4 1088 Endstütze/rechtsseitlich geschlossen Ø 44 mm
end support/rightclosed on one side Ø 44 mm
100/5 1089 Endstütze/linksseitlich geschlossen Ø 44mm
end support/leftclosed on one side Ø 44 mm
100/6 1091 Endstück gebogen/links Ø 44 mm
tail and bend/ left Ø 44 mm
100/7 1092 Endstück gebogen/rechts Ø 44 mm
tail and bend/ right Ø 44 mm
100/10 1094 Hülsenbogen/links Ø 44 mm bushing bend/left Ø 44 mm
100/11 1095 Hülsenbogen/rechts Ø 44 mm bushing bend/right Ø 44 mm
100/12 1097 Flansch flange
100/13 1298 Hülse bushing
100/14 1290 Flansch-Abdeckung flange covering
Preise / Prices auf Anfrage on demand
Lieferzeit / Delivery time
aus freibleibendem Vorrat while stocks last
Einbaubeispiel SM-100Example for Installation SM-100
Alle Teile sind untereinander kombinier- und aus-tauschbar (steckbar).Die Gesamtlänge sowie die Anzahl der Mittelstützen richtet sich nach dem jeweiligen Bedarf.
All parts can be combined and exchanged with each other (combinable).The total length as well as the number of the middle supports vary according to the individual need.
EDELSTAHL-HANDLAUF SM-100 -steckbar -STAINLESS STEEL HANDRAIL SM-100 -combinable-
100/11
100/6 oder 100/7
100/2 110/1
100/4 oder 100/5
100/10
Best.-Nr. / Order-No.
STRUKTURMETALL GmbH & Co. KG . Moosbachstraße 22 . 74626 Bretzfeld-Schwabbach . GERMANYTelefon +49 79 46 92 50 0 . Fax +49 79 46 92 50 50 . [email protected] . www.strukturmetall.de
www.strukturmetall.de
Best.-Nr.Order-No.
Art.-Nr.Art.-No.
BenennungSpecification
100/1 1074 Handlauf-Rohr Ø 40 mm x 2 mm
handrail tubeØ 40 mm x 2 mm
100/2 1086 Mittelstütze Ø 44 mmmit Hülse
middle support Ø 44 mmwith bushing
100/4 1088 Endstütze/rechts Ø 44 mmmit Hülseseitlich geschlossen
endsupport/right Ø 44 mmwith bushingclosed on one side
100/5 1089 Endstütze/links Ø 44 mmmit Hülseseitlich geschlossen
endsupport/left Ø 44 mmwith bushingclosed on one side
100/6 1091 Endstück Ø 44 mmgebogen/linksmit Hülse
endsupport Ø 44 mmbend/leftwith bushing
100/7 1092 Endstück Ø 44 mmgebogen/rechtsmit Hülse
endsupport Ø 44 mmbend/rightwith bushing
EDELSTAHL-HANDLAUF SM-100 -steckbar-STAINLESS STEEL HANDRAIL SM-100 -combinable-
max. 6000
Ø 4
02
100
Ø 4
0
50 50
Ø 4
4
63
10
Ø 27
M 8
Gewindestift mitInnensechskantDIN 914 M5x6
set screw withhexagon socketDIN 914 M5x6
100
Ø 4
0
50 50
Ø 4
4
63
10
Ø 27M 8
Gewindestift mitInnensechskantDIN 914 M5x6
set screw withhexagon socketDIN 914 M5x6
Ø 4
0
Ø 4
4
63
10
100M 8
Gewindestift mitInnensechskantDIN 914 M5x6
set screw withhexagon socketDIN 914 M5x6
63
Gewindestift mitInnensechskantDIN 914 M5x6
set screw withhexagon socketDIN 914 M5x6
Gewindestift mitInnensechskantDIN 914 M5x6
set screw withhexagon socketDIN 914 M5x6
Ø 4
0Ø
44
63
10
Ø 27
M 8
100
50 50
STRUKTURMETALL GmbH & Co. KG . Moosbachstraße 22 . 74626 Bretzfeld-Schwabbach . GERMANYTelefon +49 79 46 92 50 0 . Fax +49 79 46 92 50 50 . [email protected] . www.strukturmetall.com
www.strukturmetall.com
Ø 4
0
Ø 4
4
10
100M 8
EDELSTAHL-HANDLAUF SM-100 -steckbar-STAINLESS STEEL HANDRAIL SM-100 -combinable-
Best.-Nr.Order-No.
Art.-Nr.Art.-No.
BenennungSpecification
100/10 1094 Hülsenbogen Ø44 mmlinks mit Hülse
bushing bend Ø44 mmleftwith bushing
100/11 1095 Hülsenbogen Ø44 mmrechtsmit Hülse
bushing bend Ø44 mmrightwith bushing
100/12 1090 Flansch
flange
100/13 1298 Hülse
bushing
100/14 1290 Flanschabdeckung
flange covering
Ø 4
0
Ø 4
4
10100
M 8
Gewindestift mitInnensechskantDIN 914 M5x6
set screw withhexagon socketDIN 914 M5x6
100
63
Ø 2730
Ø 4
0
Ø 4
4
10
100
M 8
Gewindestift mitInnensechskantDIN 914 M5x6
set screw withhexagon socketDIN 914 M5x6
100
63
Ø 2730
M 8 Gewindestift mit InnensechskantDIN 914 M5x6
set screw with hexagon socketDIN 914 M5x6
8
Ø 60
Für Senkkopfschraubenmit InnensechskantDIN 7991 M8
for countersunkwith hexagon socketDIN 7991 M8
Ø 80
Ø 9
Ø 19
18
M8
9
Ø 22
Ø 82
www.strukturmetall.com
STRUKTURMETALL GmbH & Co. KG . Moosbachstraße 22 . 74626 Bretzfeld-Schwabbach . GERMANYTelefon +49 79 46 92 50 0 . Fax +49 79 46 92 50 50 . [email protected] . www.strukturmetall.com
Typ / Type SM-200 (Steckhülsen) SM-200 (element to combine/notched)
Werkstoff
Material
1.4301 geschliffen AISI 304 satinated
AusführungFinish
Edelstahl geschliffen, auf Wunsch Edelstahl poliert/Edelstahl poliert titanium-beschichtet oder hairline titanium-beschichtet.
stainless steel satinated, at request stainless steel polished,stainless steel polished titanium-coated or hairline titanium coated.
Best.-Nr.Order-No.
Art.-Nr.Art.-No. Benennung Specification
200/1 1102 Handlauf-Rohr Ø 44 mm x 2 mm handrail-tube Ø 40 mm x 2 mm
200/2 1391 Mittelstütze Ø 44 mm middle support Ø 44 mm
200/4 1392 Endstütze/rechtsseitlich geschlossen Ø 44 mm
end support/rightclosed on one side Ø 44 mm
200/5 1393 Endstütze/linksseitlich geschlossen Ø 44 mm
end support/leftclosed on one side Ø 44 mm
200/6 1394 Endstück gebogen/links Ø 44 mm
tail and bend/ left Ø 44 mm
200/7 1395 Endstück gebogen/rechts Ø 44 mm
tail and bend/ right Ø 44 mm
200/9 1099 Steckhülse/geschlitzt element to combine/notched Ø 40 mm
200/10 1396 Hülsenbogen/links Ø 44 mm bushing bend/left Ø 44 mm
200/11 1397 Hülsenbogen/rechts Ø 44 mm bushing bend/right Ø 44 mm
100/12 1097 Flansch flange
100/13 1298 Hülse bushing
100/14 1290 Flansch-Abdeckung flange covering
Preise / Prices auf Anfrage on demand
Lieferzeit / Delivery time
aus freibleibendem Vorrat while stocks last
Einbaubeispiel SM-200Example for Installation SM-200
Alle Teile sind untereinander kombinier- und austauschbar (steckbar).Die Gesamtlänge sowie die Anzahl der Mittelstützen richtet sich nach dem jeweiligen Bedarf.
All parts can be combined and exchanged with each other (combinable).The total length as well as the number of the middle supports vary according to the individual need.
EDELSTAHL-HANDLAUF SM-200 -steckbar-STAINLESS STEEL HANDRAIL SM-200 -combinable-
www.strukturmetall.de
200/10
200/11
200/6 oder 200/7
200/2 200/1
200/4 oder 200/5
Best.-Nr. /Order-No.200/9
200/9
200/9
200/9
STRUKTURMETALL GmbH & Co. KG . Moosbachstraße 22 . 74626 Bretzfeld-Schwabbach . GERMANYTelefon +49 79 46 92 50 0 . Fax +49 79 46 92 50 50 . [email protected] . www.strukturmetall.de
Best.-Nr.Order-No.
Art.-Nr.Art.-No.
BenennungSpecification
200/1 1102 Handlauf-Rohr Ø 44 mm x 2 mm
handrail tubeØ 44 mm x 2 mm
200/2 1391 Mittelstütze Ø 44mmmit Hülse
middle support Ø 44 mmwith bushing
200/4 1392 Endstütze/rechts Ø 44 mmmit Hülseseitlich geschlossen
endsupport/right Ø 44 mmwith bushingclosed on one side
200/5 1393 Endstütze/links Ø 44 mmmit Hülseseitlich geschlossen
endsupport/left Ø44 mmwith bushingclosed on one side
200/6 1394 Endstück Ø 44 mmgebogen/linksmit Hülse
endsupport Ø 44 mmbend/leftwith bushing
200/7 1395 Endstück Ø 44 mmgebogen/rechtsmit Hülse
endsupport Ø 44 mmbend/rightwith bushing
EDELSTAHL-HANDLAUF SM-200 -steckbar-STAINLESS STEEL HANDRAIL SM-200 -combinable-
www.strukturmetall.com
max. 6000
Ø 4
02
100
Ø 4
0
50 50
Ø 4
4
63
10
Ø 27
M 8
Gewindestift mitInnensechskantDIN 914 M5x6
set screw withhexagon socketDIN 914 M5x6
100
Ø 4
0
50 50
Ø 4
4
63
10
Ø 27
M 8
Gewindestift mitInnensechskantDIN 914 M5x6
set screw withhexagon socketDIN 914 M5x6
63
10
100M 8
Gewindestift mitInnensechskantDIN 914 M5x6
set screw withhexagon socketDIN 914 M5x6
63
10
100M 8
Gewindestift mitInnensechskantDIN 914 M5x6
set screw withhexagon socketDIN 914 M5x6
Gewindestift mitInnensechskantDIN 914 M5x6
set screw withhexagon socketDIN 914 M5x6
Ø 4
0Ø
44
6310
Ø 27
M 8
100
50 50
Ø 4
4
Ø 4
0
STRUKTURMETALL GmbH & Co. KG . Moosbachstraße 22 . 74626 Bretzfeld-Schwabbach . GERMANYTelefon +49 79 46 92 50 0 . Fax +49 79 46 92 50 50 . [email protected] . www.strukturmetall.com
Ø 4
4
Ø 4
0
Best.-Nr.Order-No.
Art.-Nr.Art.-No.
BenennungSpecification
200/9 1099 Steckhülse/geschlitzt
element to combinenotched
100/10 1094 Hülsenbogen Ø 44 mmlinks mit Hülse
bushing bend Ø 44 mmleftwith bushing
100/11 1095 Hülsenbogen Ø 44 mmrechtsmit Hülse
bushing bend Ø 44 mmrightwith bushing
EDELSTAHL-HANDLAUF SM-200 -steckbar-STAINLESS STEEL HANDRAIL SM-200 -combinable-
www.strukturmetall.com
STRUKTURMETALL GmbH & Co. KG . Moosbachstraße 22 . 74626 Bretzfeld-Schwabbach . GERMANYTelefon +49 79 46 92 50 0 . Fax +49 79 46 92 50 50 . [email protected] . www.strukturmetall.com
Ø 4
0
Ø 4
4
10
100
M 8
Gewindestift mitInnensechskantDIN 914 M5x6
set screw withhexagon socketDIN 914 M5x6
100
63
Ø 2730
Ø 4
0
Ø 4
4
10
100
M 8
Gewindestift mitInnensechskantDIN 914 M5x6
set screw withhexagon socketDIN 914 M5x6
100
63
Ø 2730
80
M 8 M 8
Ø 4
0
Spannschraubendraw spindles
Typ / Type SM-100 (Steckmuffen) SM-100 (bushings to combine)
Werkstoffe/
Materials
1.4301 geschliffen AISI 304 satinated
AusführungFinish
Edelstahl geschliffen, auf Wunsch Edelstahl poliert/Edelstahl poliert titanium-beschichtet oder hairline titanium-beschichtet.
stainless steel satinated, at request stainless steel polished,stainless steel polished titanium-coated or hairline titanium coated.
Best.-Nr.Order-No.
Art.-Nr.Art.-No. Benennung Specification
100/1 1074 Handlauf-Rohr Ø40 mm x 2 mm handrail-tube Ø 40 mm x 2 mm
100/2 1086 Mittelstütze Ø44 mm middle support Ø44 mm
100/4 1088 Endstütze/rechtsseitlich geschlossen Ø44 mm
end support/rightclosed on one side Ø44 mm
100/5 1089 Endstütze/linksseitlich geschlossen Ø44mm
end support/leftclosed on one side Ø44 mm
100/6 1091 Endstück gebogen/links Ø44 mm
tail and bend/ left Ø44 mm
100/7 1092 Endstück gebogen/rechts Ø44 mm
tail and bend/ right Ø44 mm
100/10 1094 Hülsenbogen/links Ø44 mm bushing bend/left Ø44 mm
100/11 1095 Hülsenbogen/rechts Ø44 mm bushing bend/right Ø44 mm
100/12 1097 Flansch flange
100/13 1298 Hülse bushing
100/14 1290 Flansch-Abdeckung flange covering
Preise / Prices auf Anfrage on demand
Lieferzeit / Delivery time
aus freibleibendem Vorrat while stocks fast
Typ / Type SM-500 (Steckhülsen) SM-500 (sleeves to combine)
Werkstoff
Material
1.4301 geschliffen AISI 304 satinated
AusführungFinish
Edelstahl geschliffen, auf Wunsch Edelstahl poliert/Edelstahl poliert titanium-beschichtet oder hairline titanium-beschichtet.
stainless steel satinated, at request stainless steel polished,stainless steel polished titanium-coated or hairline titanium coated.
Best.-Nr.Order-No.
Art.-Nr.Art.-No. Benennung Specification
500/1 1189 Handlauf-Rohr Ø 36 mm x 2 mm handrail-tube Ø 36 mm x 2 mm
500/2 1292 Mittelstütze Ø 40 mm middle support Ø 40 mm
500/4 1293 Endstütze/linksseitlich geschlossen Ø 40 mm
end support/leftclosed on one side Ø 40 mm
500/5 1294 Endstütze/rechtsseitlich geschlossen Ø 40 mm
end support/rightclosed on one side Ø 40 mm
500/6 1161 Endstück gebogen/links Ø 40 mm
tail and bend/ left Ø 40 mm
500/7 1162 Endstück gebogen/rechts Ø 40 mm
tail and bend/ right Ø 40 mm
500/10 1295 Hülsenbogen/links Ø 40 mm bushing bend/left Ø 40 mm
500/11 1296 Hülsenbogen/rechts Ø 40 mm bushing bend/right Ø 40 mm
500/12 1097 Flansch flange
500/13 1298 Hülse bushing
500/14 1290 Flansch-Abdeckung flange covering
Preise / Prices auf Anfrage on demand
Lieferzeit / Delivery time
aus freibleibendem Vorrat while stocks last
Einbaubeispiel SM-500Example vor Installation SM-500
Alle Teile sind untereinander kombinier- und austauschbar (steckbar).Die Gesamtlänge sowie die Anzahl der Mittelstützen richtet sich nach dem jeweiligen Bedarf.
All parts can be combined and exchanged with each other (combinable).The total length as well as the number of the middle supports vary according to the individual need.
EDELSTAHL-HANDLAUF SM-500 -steckbar -STAINLESS STEEL HANDRAIL SM-500 -combinable-
www.strukturmetall.de
500/10
500/11
500/6 oder 500/7
500/2 500/1
500/4 oder 500/5
Best.-Nr. /Order-No.
STRUKTURMETALL GmbH & Co. KG . Moosbachstraße 22 . 74626 Bretzfeld-Schwabbach . GERMANYTelefon +49 79 46 92 50 0 . Fax +49 79 46 92 50 50 . [email protected] . www.strukturmetall.de
Best.-Nr.Order-No.
Art.-Nr.Art.-No.
BenennungSpecification
500/1 1189 Handlauf-Rohr Ø 36 mm x 2 mm
handrail tubeØ 36 mm x 2 mm
500/2 1292 Mittelstütze Ø 40 mmmit Hülse
middle suport Ø 40 mmwith bushing
500/4 1293 Endstütze/rechts Ø 40 mmmit Hülseseitlich geschlossen
endsupport/right Ø 40 mmwith bushingclosed on one side
500/5 1294 Endstütze/links Ø 40 mmmit Hülseseitlich geschlossen
endsupport/left Ø 40 mmwith bushingclosed on one side
500/6 1161 Endstück Ø 40 mmgebogen/linksmit Hülse
endsupport Ø 40 mmbend/leftwith bushing
500/7 1162 Endstück Ø 40 mmgebogen/rechtsmit Hülse
endsupport Ø
bend/rightwith bushing
EDELSTAHL-HANDLAUF SM-500 -steckbar -STAINLESS STEEL HANDRAIL SM-500 -combinable-
www.strukturmetall.com
max. 6000
Ø 3
62
100
Ø 3
6
50 50
Ø 4
0
63
10
Ø 27
M 8
Gewindestift mitInnensechskantDIN 914 M5x6
set screw withhexagon socketDIN 914 M5x6
100
Ø 3
6
50 50
Ø 4
0
63
10
Ø 27
M 8
Gewindestift mitInnensechskantDIN 914 M5x6
set screw withhexagon socketDIN 914 M5x6
Ø 3
6
Ø 4
0
63
10
100M 8
Gewindestift mitInnensechskantDIN 914 M5x6
set screw withhexagon socketDIN 914 M5x6
Ø 3
6
Ø 4
0
63
10
100M 8
Gewindestift mitInnensechskantDIN 914 M5x6
set screw withhexagon socketDIN 914 M5x6
Gewindestift mitInnensechskantDIN 914 M5x6
set screw withhexagon socketDIN 914 M5x6
Ø 4
0Ø
44
63
10
Ø 27
M 8
100
50 50
STRUKTURMETALL GmbH & Co. KG . Moosbachstraße 22 . 74626 Bretzfeld-Schwabbach . GERMANYTelefon +49 79 46 92 50 0 . Fax +49 79 46 92 50 50 . [email protected] . www.strukturmetall.com
Best.-Nr.Order-No.
Art.-Nr.Art.-No.
BenennungSpecification
100/10 1094 Hülsenbogen Ø 44 mmlinks mit Hülse
bushing bend Ø 44 mmleftwith bushing
100/11 1095 Hülsenbogen Ø 44 mmrechtsmit Hülse
bushing bend Ø 44 mmrightwith bushing
EDELSTAHL-HANDLAUF SM-500 -steckbar -STAINLESS STEEL HANDRAIL SM-500 -combinable-
www.strukturmetall.com
Ø 4
0
Ø 4
4
10100
M 8
Gewindestift mitInnensechskantDIN 914 M5x6
set screw withhexagon socketDIN 914 M5x6
100
63
Ø 2730
Ø 4
0
Ø 4
410
100
M 8
Gewindestift mitInnensechskantDIN 914 M5x6
set screw withhexagon socketDIN 914 M5x6
100
63
Ø 2730
STRUKTURMETALL GmbH & Co. KG . Moosbachstraße 22 . 74626 Bretzfeld-Schwabbach . GERMANYTelefon +49 79 46 92 50 0 . Fax +49 79 46 92 50 50 . [email protected] . www.strukturmetall.com
Typ / Type SM-600 (Steckhülsen) SM-600 (element to combine/notched)
Werkstoff
Material
1.4301 geschliffen AISI 304 grinded
AusführungFinish
Edelstahl geschliffen, auf Wunsch Edelstahl poliert/Edelstahl poliert titanium-beschichtet oder hairline titanium-beschichtet.
stainless steel satinated, at request stainless steel polished,stainless steel polished titanium-coated or hairline titanium coated.
Best.-Nr.Order-No.
Art.-Nr.Art-No. Benennung Specification
600/1 1079 Handlauf-Rohr Ø40 mm x 2 mm handrail-tube Ø40 mm x 2 mm
600/2 1398 Mittelstütze Ø40 mm middle support Ø40 mm
600/4 1399 Endstütze/linksseitlich geschlossen Ø40 mm
end support/leftclosed on one side Ø40 mm
600/5 1400 Endstütze/rechtsseitlich geschlossen Ø40 mm
end support/rightclosed on one side Ø40 mm
600/6 1401 Endstück gebogen/links Ø40 mm
tail and bend/ left Ø40 mm
600/7 1402 Endstück gebogen/rechts Ø40 mm
tail and bend/ right Ø40 mm
600/9 1297 Steckhülse/geschlitzt Ø36 mm element to combine/ notched Ø36 mm
600/10 1404 Hülsenbogen/links Ø40 mm bushing bend/Ø40 mm
600/11 1405 Hülsenbogen/rechts Ø40 mm bushing bend/right Ø40 mm
100/12 1097 Flansch flange
100/13 1298 Hülse bushing
100/14 1290 Flansch-Abdeckung flange covering
Preise / Prices auf Anfrage on demand
Lieferzeit / Delivery time
aus freibleibendem Vorrat while stocks last
Einbaubeispiel SM-600Example vor Installation SM-600
Alle Teile sind untereinander kombinier- und aus-tauschbar (steckbar).Die Gesamtlänge sowie die Anzahl der Mittelstützen richtet sich nach dem jeweiligen Bedarf.
All parts can be combined and exchanged with each other (combinable).The total length as well as the number of the middle supports vary according to the individual need.
EDELSTAHL-HANDLAUF SM-600 -steckbar -STAINLESS STEEL HANDRAIL SM-600 -combinable-
www.strukturmetall.de
600/10
600/11
600/6 oder 600/7
600/2 600/1
STRUKTURMETALL GmbH & Co. KG . Moosbachstraße 22 . 74626 Bretzfeld-Schwabbach . GERMANYTelefon +49 79 46 92 50 0 . Fax +49 79 46 92 50 50 . [email protected] . www.strukturmetall.de
Best.-Nr. /Order-No.
600/4 oder 600/5
600/9
600/9
600/9
600/9
Best.-Nr.Order-No.
Art.-Nr.Art.-No.
BenennungSpecification
600/1 1187 Handlauf-Rohr Ø40 mm x 2 mm
handrail tubeØ40 mm x 2 mm
600/2 1398 Mittelstütze Ø40 mmmit Hülse
middle support Ø40 mmwith bushing
600/4 1399 Endstütze/rechts Ø 40 mmmit Hülseseitlich geschlossen
endsupport/right Ø40 mmwith bushingclosed on one side
600/5 1400 Endstütze/links Ø40 mmmit Hülseseitlich geschlossen
endsupport/left Ø40 mmwith bushingclosed on one side
600/6 1401 Endstück Ø40 mmgebogen/linksmit Hülse
endsupport Ø40 mmbend/leftwith bushing
600/7 1402 Endstück Ø40 mmgebogen/rechtsmit Hülse
endsupport Ø40 mmbend/rightwith bushing
EDELSTAHL-HANDLAUF SM-600 -steckbar - STAINLESS STEEL HANDRAIL SM-600 -combinable-
www.strukturmetall.com
max. 6000
Ø40
2
100
Ø36
50 50
Ø40
63
10
Ø27
M 8
Gewindestift mitInnensechskantDIN 914 M5x6
set screw withhexagon socketDIN 914 M5x6
100
Ø36
50 50
Ø40
63
10
Ø27M 8
Gewindestift mitInnensechskantDIN 914 M5x6
set screw withhexagon socketDIN 914 M5x6
Ø36
Ø40
63
10
100M 8
Gewindestift mitInnensechskantDIN 914 M5x6
set screw withhexagon socketDIN 914 M5x6
Ø36
Ø40
63
10
100M 8
Gewindestift mitInnensechskantDIN 914 M5x6
set screw withhexagon socketDIN 914 M5x6
Gewindestift mitInnensechskantDIN 914 M5x6
set screw withhexagon socketDIN 914 M5x6
Ø40
Ø44
63
10
Ø27
M 8
100
50 50
STRUKTURMETALL GmbH & Co. KG . Moosbachstraße 22 . 74626 Bretzfeld-Schwabbach . GERMANYTelefon +49 79 46 92 50 0 . Fax +49 79 46 92 50 50 . [email protected] . www.strukturmetall.com
EDELSTAHL-HANDLAUF SM-600 -steckbar - STAINLESS STEEL HANDRAIL SM-600 -combinable-
www.strukturmetall.com
Best.-Nr.Order-No.
Art.-Nr.Art.-No.
BenennungSpecification
600/9 1297 Steckhülse/geschlitzt
element to combinenotched
600/10 1404 Hülsenbogen Ø40 mmlinks mit Hülse
bushing bend Ø40 mmleftwith bushing
100/11 1405 Hülsenbogen Ø40 mmrechtsmit Hülse
bushing bend Ø40 mmrightwith bushing
Ø36
Ø40
10
100
M 8
Gewindestift mitInnensechskantDIN 914 M5x6
set screw withhexagon socketDIN 914 M5x6
100
63
Ø2730
Ø36
Ø40
10
100
M 8
Gewindestift mitInnensechskantDIN 914 M5x6
set screw withhexagon socketDIN 914 M5x6
100
63
Ø2730
80
M 8 M 8
Ø36
Spannschraubendraw spindles
STRUKTURMETALL GmbH & Co. KG . Moosbachstraße 22 . 74626 Bretzfeld-Schwabbach . GERMANYTelefon +49 79 46 92 50 0 . Fax +49 79 46 92 50 50 . [email protected] . www.strukturmetall.com
Typ / Type SM-900 (Steckhülsen) SM-900 (element to combine/notched)
Werkstoff
Material
1.4301 geschliffen AISI 304 grinded
AusführungFinish
Edelstahl geschliffen, auf Wunsch Edelstahl poliert/Edelstahl poliert titanium-beschichtet oder hairline titanium-beschichtet.
stainless steel satinated, at request stainless steel polished,stainless steel polished titanium-coated or hairline titanium coated.
Best.-Nr.Order-No.
Art.-Nr.Art.-No. Benennung Specification
900/1 1187 Handlauf-Rohr Ø 30 mm x 2 mm handrail-tube Ø 30 mm x 2 mm
900/2 1406 Mittelstütze Ø 30 mm middle support Ø 30 mm
900/4 1407 Endstütze/linksseitlich geschlossen Ø 30 mm
end support/leftclosed on one side Ø 30 mm
900/5 1408 Endstütze/rechtsseitlich geschlossen Ø 30 mm
end support/rightclosed on one side Ø 30 mm
900/6 1409 Endstück gebogen/links Ø 30 mm
tail and bend/ left Ø 30 mm
900/7 1410 Endstück gebogen/rechts Ø 30 mm
tail and bend/ right Ø 30 mm
900/9 1411 Steckhülse/geschlitzt Ø 26 mm element to combine/notched Ø 26 mm
900/10 1412 Hülsenbogen/links Ø 30 mm bushing bend/Ø 30 mm
900/11 1413 Hülsenbogen/rechts Ø 30 mm bushing bend/right Ø 30mm
100/12 1097 Flansch flange
100/13 1298 Hülse bushing
100/14 1290 Flansch-Abdeckung flange covering
Preise / Prices auf Anfrage on demand
Lieferzeit / Delivery time
aus freibleibendem Vorrat while stocks last
Einbaubeispiel SM-900Example vor Installation SM-900
Alle Teile sind untereinander kombinier- und austauschbar (steckbar).Die Gesamtlänge sowie die Anzahl der Mittelstützen richtet sich nach dem jeweiligen Bedarf.
All parts can be combined and exchanged with each other (combinable).The total length as well as the number of the middle supports vary according to the individual need.
EDELSTAHL-HANDLAUF SM-900 -steckbar- STAINLESS STEEL HANDRAIL SM-900 -combinable-
www.strukturmetall.de
900/10
900/11
900/6 oder 900/7
900/2 900/1
900/4 oder 900/5
900/9Best.-Nr. / Order-No.
900/9
900/9
900/9
STRUKTURMETALL GmbH & Co. KG . Moosbachstraße 22 . 74626 Bretzfeld-Schwabbach . GERMANYTelefon +49 79 46 92 50 0 . Fax +49 79 46 92 50 50 . [email protected] . www.strukturmetall.de
Best.-Nr.Order-No.
Art.-Nr.Art.-No.
BenennungSpecification
900/1 1187 Handlauf-Rohr Ø 30 mm x 2 mm
handrail tubeØ 30 mm x 2 mm
900/2 1406 Mittelstütze Ø 30 mmmit Hülse
middle support Ø 30 mmwith bushing
900/4 1407 Endstütze/rechts Ø 30 mmmit Hülseseitlich geschlossen
endsupport/right Ø 30 mmwith bushingclosed on one side
900/5 1408 Endstütze/links Ø30 mmmit Hülseseitlich geschlossen
endsupport/left Ø30 mmwith bushingclosed on one side
900/6 1409 Endstück Ø 30 mmgebogen/linksmit Hülse
endsupport Ø 30 mmbend/leftwith bushing
900/7 1410 Endstück Ø 30 mmgebogen/rechtsmit Hülse
endsupport Ø 30 mmbend/rightwith bushing
EDELSTAHL-HANDLAUF SM-900 -steckbar- STAINLESS STEEL HANDRAIL SM-900 -combinable-
www.strukturmetall.com
max. 6000
Ø 3
02
100
Ø 2
6
50 50
Ø 3
0
63
10
Ø 27M 8
Gewindestift mitInnensechskantDIN 914 M5x6
set screw withhexagon socketDIN 914 M5x6
100
Ø 2
6
50 50
Ø 3
0
63
10
Ø 27
M 8
Gewindestift mitInnensechskantDIN 914 M5x6
set screw withhexagon socketDIN 914 M5x6
Ø 2
6
Ø 3
0
63
10
100M 8
Gewindestift mitInnensechskantDIN 914 M5x6
set screw withhexagon socketDIN 914 M5x6
Ø 2
6
Ø 3
0
63
10
100M 8
Gewindestift mitInnensechskantDIN 914 M5x6
set screw withhexagon socketDIN 914 M5x6
Gewindestift mitInnensechskantDIN 914 M5x6
set screw withhexagon socketDIN 914 M5x6
Ø 2
6Ø
30
63
10
Ø 27
M 8
100
50 50
STRUKTURMETALL GmbH & Co. KG . Moosbachstraße 22 . 74626 Bretzfeld-Schwabbach . GERMANYTelefon +49 79 46 92 50 0 . Fax +49 79 46 92 50 50 . [email protected] . www.strukturmetall.com
EDELSTAHL-HANDLAUF SM-900 -steckbar-STAINLESS STEEL HANDRAIL SM-900 -combinable-
www.strukturmetall.com
Best.-Nr.Order-No.
Art.-Nr.Art.-No.
BenennungSpecification
900/9 1411 Steckhülse/geschlitzt
element to combinenotched
900/10 1412 Hülsenbogen Ø 30 mmlinks mit Hülse
bushing bend Ø 30 mmleftwith bushing
100/11 1413 Hülsenbogen Ø 30 mmrechtsmit Hülse
bushing bend Ø 30 mmrightwith bushing
Ø 2
6Ø
30
10
100
M 8
Gewindestift mitInnensechskantDIN 914 M5x6
set screw withhexagon socketDIN 914 M5x6
100
63
Ø2730
Ø 2
6
Ø 3
0
10
100
M 8
Gewindestift mitInnensechskantDIN 914 M5x6
set screw withhexagon socketDIN 914 M5x6
100
63
Ø 2730
80
M 8 M 8
Ø 2
6
Spannschraubendraw spindles
STRUKTURMETALL GmbH & Co. KG . Moosbachstraße 22 . 74626 Bretzfeld-Schwabbach . GERMANYTelefon +49 79 46 92 50 0 . Fax +49 79 46 92 50 50 . [email protected] . www.strukturmetall.com
Typ / Werkstoff
Material
1.4301 geschliffen AISI 304 grinded
AusführungFinish
Edelstahl geschliffen, auf Wunsch Edelstahl poliert/Edelstahl poliert titanium-beschichtet oder hairline titanium-beschichtet.
Die geschweißten Handläufe fertigen wir ganz individell nachIhren Wünschen und Zeichnungenin den Rohrdurchmessern 20, 25, 30, 36, 40 und 44 mm.
Die Wandbefestigungen sind wiebei den Handlauftypen SM-100und SM 200.
Voraussetzungen sind exakte technische Vorgaben (Zeichnungen).
stainless steel satinated, at request stainless steel polished,stainless steel polished titanium-coated or hairline titanium coated.
We manufacture the welded handrails individually accordingto your desire and drawingsin following tube diameters20, 25, 30, 36, 40 and 44 mm.
The wall fastenings are likethose of our handrail typesSM-100 and SM-200.
On the condition of precisetechnical documentation (drawings).
Preise / Prices auf Anfrage on demand
Lieferzeit / Delivery time
ca. 8 Tage approxomately 8 days
EDELSTAHL-HANDLAUF GESCHWEISST SM-300 STAINLESS STEEL HANDRAIL WELDED SM-300
www.strukturmetall.de
STRUKTURMETALL GmbH & Co. KG . Moosbachstraße 22 . 74626 Bretzfeld-Schwabbach . GERMANYTelefon +49 79 46 92 50 0 . Fax +49 79 46 92 50 50 . [email protected] . www.strukturmetall.de
Typ / Type SM-400 (geschweißt) SM-400 (welded)
Werkstoffe/
Materials
1.4301 geschliffen AISI 304 grinded
Ausführung
Finish
Edelstahl geschliffen, auf Wunsch Edelstahl poliert/Edelstahl poliert titanium-beschichtet oder hairline titanium-beschichtet.
Stainless steel satinated, at request stainless steel polished,stainless steel polished titanium-coated or hairline titanium coated.
Abmessungen
Dimensions
60 x 20 x 6000 mm
Auf Wunsch in Fixlängen und verschweißten Endstücken oder Kunststoffkappen in den Farben grau, schwarz und weiß.
Die Wandbefestigungsmöglich-keiten sind wie bei den Hand-lauftypen SM-100 und SM 200.
60 x 20 x 6000 mm
At request fixed sizes andwelded closed ends or closed byplastic caps in colours grey, black and white.
Fixings to the wall are like thoseof our handrail typesSM-100 and SM-200.
Preise / Prices auf Anfrage on demand
Lieferzeit / Delivery time
ca. 8 Tage approxomately 8 days
EDELSTAHL-HANDLAUF RECHTECK SM-400 STAINLESS STEEL HANDRAIL RECTANGULAR TUBE SM-400
www.strukturmetall.de
60
20 102
60 Ø27
M 8
STRUKTURMETALL GmbH & Co. KG . Moosbachstraße 22 . 74626 Bretzfeld-Schwabbach . GERMANYTelefon +49 79 46 92 50 0 . Fax +49 79 46 92 50 50 . [email protected] . www.strukturmetall.de
Typ / Type SM-700 SM-700 Werkstoffe/Material
1.4301 AISI 304
OberflächeSurface
geschliffen satinated
EinsatzgebieteFields of usage
Aufzugkabine mitBrandschutzvorschriften
Der Edelstahl-Klappsitz ist zum Einbau in alle Aufzugkabinen geeignet. Insbesondere erfüllt er die Norm der Brandschutzvor-schriften.
Er ist mittels Zylinderschraubenauf einer Unterkonstruktion leichtzu montieren.
Der Edelstahl-Klappsitz kann mitleichtem Druck in eine bequemeSitzposition geklappt werden.Nach Gebrauch wird der Klapp-sitz über ein Federsystem in dersenkrechten Ruhestellung fixiert.
Lift and elevator cabin with fireprotection regulations.
The stainless steel drop seat issiutable for installation into all liftand elevator cabins. It fullfills in particular the standards of fireprotection regulations. It can easilybe installed by means of cap screwson the wall of the elevator.
The stainless steel drop seat can betilted into a comfortable seat positonby means of a slight pressure. Afterusage it can easily be fixed in a verticalresting position due to its spring system. A limitation prevents the seat from striking the wall of the elevator cabin.
Preise / Prices auf Anfrage on demand
Lieferzeit / aus freibleibendem Vorrat while stocks last
EDELSTAHL-KLAPPSITZ SM 700STAINLESS STEEL DROP SEAT SM 700
www.strukturmetall.de
420
140
70
2020
80 45
40055
415
436
390
STRUKTURMETALL GmbH & Co. KG . Moosbachstraße 22 . 74626 Bretzfeld-Schwabbach . GERMANYTelefon +49 79 46 92 50 0 . Fax +49 79 46 92 50 50 . [email protected] . www.strukturmetall.de
Typ / Type SM-710 SM-710 Werkstoffe/Material
1.4301 AISI 304
OberflächeSurface
geschliffen satinated
EinsatzgebieteFields of usage
Aufzugskabine mit Brandschutzvorschriften.
Der versenkbare Klappsitz zum Einbau in Aufzügen oder überall da, wo ein hervorstehendes Bauteil nicht möglich ist. Er erfüllt die Norm der Brandschutz-vorschriften.
Befestigung des Sitzes:Auf der Rückseite des Gehäuses sind 12 Gewindebolzen (M6x32 max.) angebracht, welche auf der Vorderseite nicht sichtbar sind.Eine rückseitige Montage muss möglich sein.
Der Edelstahl-Klappsitz kann mit leich-tem Druck in eine bequeme Sitzposition gebracht werden.
Die Sitzfläche wird in der Ruhestellung durch Federkraft senkrecht gehalten.
Lift and elevator cabins with fire protection regulations.
The insertable drop seat will be used in lift cars or wherever nothing can protrude.
Fixing of the seat:At the back of the frame are fixed 12 threaded bolts (M6 x 32 max.). They are not visible from the front side. Fixing the frame is only possible from the outside of the lift car.
The stainless steel drop seat can be tilted into a comfortable seat position by means of a slight pressure. After usage it can easily be fixed in a vertical resting position due to its spring system.
A limitation prevents the seat from striking the wall of the elevator cabin.
Preise / Prices auf Anfrage on demand
Lieferzeit / Delivery time
aus freibleibendem Vorrat while stocks last
VERSENKBARER EDELSTAHL-KLAPPSITZ SM 710STAINLESS STEEL INSERTABLE DROP SEAT SM 710
www.strukturmetall.de
STRUKTURMETALL GmbH & Co. KG . Moosbachstraße 22 . 74626 Bretzfeld-Schwabbach . GERMANYTelefon +49 79 46 92 50 0 . Fax +49 79 46 92 50 50 . [email protected] . www.strukturmetall.de
Typ / Type SM-715 SM-715Werkstoffe / Material 1.4301 AISI 304
Oberfläche / Surface Standardausführung geschliffen. Auf Anfrage in Leder, Leinen, Karo, Raute, Austenit, 5WL und spiegelpoliert erhältlich.
Standard design satinated. Leather, Linen, Square, Rhomb, Austenit, 5WL, polished on demand.
Einsatzgebiete / Fields of usage Aufzugkabine mit Brandschutzvorschriften
Der Edelstahl-Klappsitz ist zum Einbau in alle Aufzugkabinen geeignet.
Durch den integrierten Anschlag hat der Sitz keinerlei Quetsch- und Scherstellen. Der Sitz hat einen neuen patentierten Dämpfer. Das heißt, die Sitzfläche wird beim Hochfahren in die Ruhestellung gedämpft.Die Sitzfläche ist mit Kunstleder - Polsterung erhältlich. Die Unter-seite der Sitzfläche kann wahl-weise auch mit Strukturblech ausgeführt werden.
Lift and elevator cabin with fire protection regulations.
The stainless steel drop seat issiutable for installation into all lift and elevator cabins.
Due to the integrated touch, the seat has no pinching or cutting points. The seat has a new patented cushion. That is, the seat surface is cushioned when it is raised into the rest position. The seat is available with synthetic leather upholstery. The underside of the seat surface can also optionally be fitted with textured plates.
Preise / Prices on demand
Lieferzeit / Delivery time
auf Anfrage
Innerhalb 1-2 Wochen within 1-2 weeks
EDELSTAHL-KLAPPSITZ SM-715 STAINLESS STEEL DROP SEAT SM-715
www.strukturmetall.de
STRUKTURMETALL GmbH & Co. KG . Moosbachstraße 22 . 74626 Bretzfeld-Schwabbach . GERMANY Telefon +49 79 46 92 50 0 . Fax +49 79 46 92 50 50 . [email protected] . www.strukturmetall.de
mit patentiertem Dämpferwith patented cushion
EDELSTAHL-KLAPPSITZ SM-720 mit Polster STAINLESS STEEL INSERTED TIP UP SEAT SM-720 with cushion
EDELSTAHL-KLAPPSITZ SM-730 STAINLESS STEEL INSERTED TIP UP SEAT SM-730
STRUKTURMETALL GmbH & Co. KG . Moosbachstraße 22 . 74626 Bretzfeld-Schwabbach . GERMANYTelefon +49 79 46 92 50 0 . Fax +49 79 46 92 50 50 . [email protected] . www.strukturmetall.de
www.strukturmetall.de
Typ / Type SM-720 SM-720 Werkstoff/Material
Polster/Cushion
Edelstahlausführungen Stainless steel finishes
1.4301
Kunstleder, schwarz (Standard)
Leder, Leinen, Karo, Raute, Austenit und SM-5WL,Edelstahl geschliffen, spiegel-poliert
1.4301
Imitation leather black (Standard)
Leather, Linen, Square, Rhomb, Austenit und SM-5WL,stainless steel satinated, stainless steel Mirror No. 8
Abmessungen /Dimension 526 x 523 x 83 mm 526 x 523 x 83 mm
Typ / Type SM-730 SM-730 Werkstoff/Material
Edelstahlausführungen Stainless steel finishes
1.4301
Leder, Leinen, Karo, Raute, Austenit und SM-5WL,Edelstahl geschliffen, spiegel-poliert
1.4301
Leather, Linen, Square, Rhomb, Austenit und SM-5WL,stainless steel satinated, stainless steel Mirror No. 8
Abmessungen /Dimension 526 x 523 x 62 mm 526 x 523 x 62 mm
Rückwand Back wall (1)
Rahmen (2) /Rahmeninnenseite (3)und Vorderseite (4) deshochgeklappten Sitzes
Front of the frame (2) /Frame inside (3) and front of the turned up seat (4)
Sitzgehäuse Seat (5)
geschliffen /satinated
dessiniert / patterned
Spiegel / Mirror
BASISBASIS
EDITIONEDITION
EXKLUSIVEXCLUSIVE
4
AusführungenVersions
Preise / Prices auf Anfrage on request
Lieferzeit / Delivery time auf Anfrage on request
Weitere Ausführungenauf AnfrageOther versions on request
geschliffen /satinated
dessiniert / patterned
Spiegel / Mirror
geschliffen /satinated
dessiniert / patterned
Spiegel / Mirror
BASIS Struktur BASIS Structure
BASIS Spiegel BASIS mirror
EDITION geschliffen EDITION satinated
EXKLUSIV StrukturEXCLUSIVE structureEXKLUSIV SpiegelEXCLUSIVE Mirror
5
1
23