Ecs catalog[2]

This is a condensed catalog.If you don’t find what you are looking for – give us a call.

2678 S. Hwy 50Grand Junction, CO 81503

866-878-4213 866-878-4213 Empire Construction Supply — Call for pricingEmpire Construction Supply — Call for pricing1

King Kong Gold SeriesSize4x.085x7/8 12mm4.5x.085x7/8 12mm5x.085x7/8 12mm6x.085x7/8 12mm7x.090xDM 12mm8x.090xDM 12mm9x.090xDM 12mm10x.090xDM 12mm

Size12x.125x1 12mm12x.125x20MM 12mm14x.125x1 12mm14x.125x20MM 12mm16x.125x1 12mm18x.142x1 12mm20x.142x1 12mm24x.155x1 12mm

Laser High Performance Turbo Blades

Big AppleSize12x.125x1 12mm14x.125x1 12mm

Size16x.125x1 12mm20x.142x1 12mm

Laser Segmented General Purpose Blades

Applications• Block/Brick• Green Concrete

• Cured Concrete• Natural Stone

Signature

Series

Signature

Series

Applications• Block/Brick• Granite

• Cured Concrete• Natural Stone

Produced by “The Catalog Group,” a division of Western Catalog Group, Inc., Washington, Missouri.Unauthorized reproduction of this catalog, whole or in part, is strictly prohibited.

Size4x.080x7/8 10mm4.5x.080x7/8 10mm5x.080x7/8 10mm6x.080x7/8 10mm7x.090xDM 10mm8x.090xDM 10mm

Size9x.100xDM 10mm10x.100xDM 10mm12x.125x1 12mm12x.125x20MM 12mm14x.125x1 12mm

Blue TitanSintered Segmented BladesApplications• General Purpose

Equipment • High Speed Saws• Table Saws• Low HP Walk-Behind Saws

BulldozerSize4x.080x5/8-7/8 5mm 4.5x.080x5/8-7/8 5mm 5x.080x5/8-7/8 5mm6x.095x5/8-7/8 5mm7x.095xDM 5mm

Size8x.095xDM 5mm10x.095xDM 5mm16x.125x1 5mm20x.140x1 5mm

ECS Bulldozer BladesApplications• PVC Pipe • Steel• Cast Iron • Wood• Ductile Iron Pipe • Reinforced Concrete• Polyurethane Pipe • I-Beams• Rebar

Equipment • Angle Grinders • Circular Saws• High Speed Saws • Table Saws

Road Runner BladeSize12x.125x1 10mm12x.125x20MM 10mm14x.125x1 10mm14x.125x20MM 10mm

Size16x.125x1 10mm18x.142x1 10mm20x.155x1 10mm

Asphalt, Asphalt over Concrete & Green ConcreteDry Cutting Green Concrete & Asphalt Blades

2Call for pricing — Empire Construction Supply Call for pricing — Empire Construction Supply 866-878-4213866-878-4213

Brick WizzardApplications• Hard Materials• Hard Paver Brick• Refractory• Firebrick

Equipment• High Speed Saws• Table Saws• Low HP Walk-Behind Saws

Size7x.090xDM 10MM10x.090x5/8 10MM12x.110x1 10MM12x.125x1 10MM12x.125x20MM 10MM14x.110x1 10MM14x.110x20MM 10MM14x.125x1 10MM14x.125x20MM 10MM

Size16x.125x1 10MM18x.142x1 10MM20x.142x1 10MM12x.110x1 10MM12x.125x1 10MM12x.125x20MM 10MM14x.110x1 10MM14x.110x20MM 10MM14x.125x1 10MM

ECS Bulldozer Blades

High HP AsphaltSize14.1x.125x1 10mm14.1X.145X1 10mm14.1X.155X1 10mm14.1X.187X1 10mm14.1X.250X1 10mm14.1X.375X1 10mm16.1x.125x1 10mm16.1x.142x1 10mm18.1x.125x1 10mm18.1x.145x1 10mm18.1x.155x1 10mm18.1x.187x1 10mm

Size20.1x.125x1 10mm20.1x.145x1 10mm24.1x.125x1 10mm24.1x.145x1 10mm24.1x.155x1 10mm24.1x.187x1 10mm26.1x.155x1 10mm26.1x.187x1 10mm30.1x.155x1 10mm30.1x.187x1 10mm36.1x.155x1 10mm36.1x.187x1 10mm

Wet, Laser, Segmented ProfessionalAsphalt Blades with Full Radius Protection

Applications• Asphalt • Medium Aggregate

Equipment• Walk-Behind Saws



Beast Size12x.125x1 15mm12x.125x20MM 15mm14x.125x1 15mm14x.125x20MM 15mm

Size16x.125x1 15mm18x.142x1 15mm20x.142x1 15mm

Laser Welded BladesApplications• General Purpose• Masonry• Soft Concrete

Equipment• High Speed Saws• Table Saws• Low HP Walk-Behind Saws

Blue TornadoSize4x.080x5/8-7/8 9mm4.5x.080x5/8-7/8 9mm5x.080x5/8-7/8 9mm6x.090x5/8-7/8 9mm7x.090xDM 9mm8x.090xDM 9mm

Size9x.090xDM 9mm10x.090xDM 9mm10x.095xDM 9mm12x.125x1 9mm14x.125x1 9mm

Tornado Turbo Blade for Hard MaterialsApplications• Granite• Marble• Hard Brick

Equipment• Angle Griners• Circular Saws

• High Speed Saws• Table Saws

Ninja BladeApplications• Hard Brick• Granite• Natural Stone

• Concrete• Masonary Materials

Equipment • High Speed Saws• Table Saws

Size4x.080x7/8 8mm4.5x.080x7/8 8mm5x.080x7/8 8mm6x.090x7/8 8mm7x.090xDM 8mm8x.090xDM 8mm

Size9x.090xDM 8mm10x.090xDM 8mm12x.125x1 10mm14x.125x1 10mm14x.125x20mm 10mm

Sintered Segmented Turbo with Pro-teeth Blades


Diameter10"10"

Segments1020

Fast Grinding Speed, Better Wheel Life PremiumCrete Mower Discs

Dima Serts Shoes

Applications• Concrete, Masonry Surface• Dry/Wet Use

Metal Bond Shoes

PCD Cup Wheel Ground Hog Cup Wheel

Grinding Shoes designed forfloor grinding and polishing

Double Round Double Square Grit 6, 16, 30, 60, 150, 300Size 2-26mm circle 12x12x40mm

Applications• Soft, Medium and

Hard Concrete

Diameter4"5"6"7"

Made for fast removal of paint,urethane, epoxy, adhesives and leftover residue

PCD and Ground Hog CupWheels work five times fasterthan segmented cup wheels and will never gum up.

Equipment• HTC grinding and

polishing heads.

Jumbo sized segmentfor extended life andlower grinding cost per square yard.

Balance technology improves machine vibration.


Bevel Devil

Bevel or round joint cutting. Random decorative or straight line cutting. Electromechanical depth control and blade wear compensation. More than 7 different size blades for any job! Self-propelled and push saws available. Optional electric motor with vacuum systems for EPA compliance.

Bevel Devil Straight Line, Model # BDSL - For bevel, radiusor square cutting and scoring ofexisting saw cut joints. Availablein self-propelled or push styles.

Bevel Devil Decorative,Model # BDDC - For decorativebevel, radius, or square cuttingand scoring of existing saw cutsor decorative surfaces.(Decorative model available with blade wear compensation or use with Cardinal’s Premiumline of Bevel, Radius and Square Diamond Blades.)

Technical SpecificationsBDSL BDSLSP BDDC

Dimensions W x L 16"x49" 16"x49" 22"x50"(with handle extended)Weight 115 lbs. 138 lbs. 134 lbs.

4.5 HP Robin engine standard on all push models (6 HP optional).

6 HP Robin engine standard on self-propelled BDSL.

2 HP electric motor available on both BDSL and BDDC push models.

1½" vacuum dust boot standard on all models.

5400 RPM blade spindle, ¾" spindle shaft with sealed bearings and Patent “Z” Arbor.

866-878-4213 866-878-4213 Empire Construction Supply — Call for pricing Empire Construction Supply — Call for pricing 7

Cardinal UPPERCUT – Blades are available in many different matrix specifications to match your aggregates, with blade sizes in any diameter and thickness to fill your cutting needs. Special bonds and blade widthsare available upon request for unusual applications.

Eliminates Raveling – Uses a maximum concentration of high quality, virgin diamonds, scientifically distributed and blended in each segment of the saw blade.

Longer Blade Life/Lower Labor Costs – Employs exclusive, Hi-retention® bonds that secure the diamonds longer and cut faster.

Precision Blade Balance and Alignment – Blade segments are laser welded to special fatigue-resistant high alloy steel blanks. Each blade is precision-tensioned.

Tremendous Flexibility and Cost Savings – Uniquely-shaped patented arbor hole assures a perfect fit – without adapters – on SOFF-CUT®* early entry concrete saws.

Cleaner/Smoother Joints – Innovative detensos aid in eliminating blade vibration.

*SOFF-CUT is a registered trademark of Soff-Cut International, Inc.Copyright © 2009 Cardinal Saws & Blades.

UPPERCUT™ Diamond Saw BladesThe Most Cost-Effective Solution

To Random Cracking in Green Concrete.


Cardinal UPPERCUT™Diamond Blades

For Beveling and Rounding Existing Saw Cut Edges(Perfect configurations for the entire life of the blade.)

Absolutely the finest diamond blades for beveling 1/8", 3/16", 1/4" and 5/16"

Also for rounding 1/4" and 1/2"

� � � �

� � �

Dimensions:Saw Cut 45° Fig.

Diameter Width Bevel Radius No.6" .100" - .120" 1/8" NA �

6" .100" - .120" 1/4" NA �

6" .250" 3/16" NA �

6" .380" 1/4" NA �

6" .500" 5/16" NA �

6" .100" - .120" NA 1/4" �

6" .100" - .120" NA 1/2" �

866-878-4213 866-878-4213 Empire Construction Supply — Call for pricing Empire Construction Supply — Call for pricing 9

Applications Cuts concrete and masonry in alteration,

renovation and new construction work. Cuts smaller holes and adjusts window

and door openings. Cuts curbstones and pavers in landscaping. Pipe cutting in installation work. Asphalt cutting in roadwork and pre-cutting in

pipe trenches. Metal cutting.Benefits Active Air Filtration™, centrifugal air cleaning in

three stages, for extended product life and longerservice intervals.

Engine with X-Torq® produces more power, highertorque and 70% fewer emissions.

SmartCarb™, built-in automatic filter compensation,maintains high power and lowers fuel consumption.

DuraStarter™, the dust-sealed starter, and thedurable starter cord reduce the risk of downtime andincrease reliability and service life.

The Poly-V belt provides better power transmission,less retensioning and increased product life.

Efficient vibration and sound dampening make themachine more convenient to use.

Technical specificationsEngine Air-cooled 2-stroke engineDisplacement 74 ccPower 5 hp*Blade diameter 12"/14" (305mm/350mm)Depth of cut 4"/5" (100mm/127mm)Max RPM (no load) 5,400Fuel capacity .95 qt. (.9 L)Max weight (without fuel and cutting equipment) 21.8 lbs. (9.7kg)*As rated by engine manufacturer.

K 750 DEX, the new dust-handling system, provides cleaner

cutting with less water usage.


Applications Unique method for cutting up to 16" deep. Ideal for window and door openings where

you don’t want overcutting at the corners. Ideal for cutting pipes in trenches, grooves for

cabling, expansion joints and for crack repair.Benefits EasyStart ensures 50% easier starting by reducing

the compression in the cylinder during starting. Sealed transmission reduces the wear and

slippage risk. Fuel indicator on the tank shows fuel level,

to help avoid unnecessary stoppages. Self-lubricating clutch bearings for extended

work life. Integrated blade and splash guard. Efficient cutter with new, easy-to-use method

that cuts up to 16" deep. Specially developed, twin 9" blades provide

high cutting speed and power. Fuel filter with increased filter capacity reduces the

risk of dirt entering the carburetor.

Technical specificationsPower 4.8 hp (I)Cylinder displacement 4.3 cu. in.Blade diameter 9" (230mm)Max Depth of cut 16" (400mm)Vibrations front handle 3.2 m/s2

Vibrations rear handle 5.7 m/s2

Sound Level 100 dB(A)Sound Power Level, LWA 116 dB(A)Weight (without fuel and cutting equipment) 22.4 lbs. (10.2kg)

K 650 Cut-n-Break

Electric K 3000 Cut-n-Break available.


BX-4

Technical specificationsMotor Electric Power 1-3/4 HP, 120VAmps 15Blade RPM 3,500Blade Capacity 14" (356mm)Arbor Size 1" (25mm)Max Material Size 8" x 8" x 16"Depth of Cut 5" (127mm)Length of Cut 16" (406mm)L x W x H 35" x 24" x 21" (889 x 610 x 533mm)Weight 70 lbs. (32kg)

Features• Portable and lightweight, open-back design allows for

material up to 16" long to be cut.• Easy to grip nylon handle with built-in lockable

trigger switch.• Water misting dust control system.• Plastic dust collection pan.• Replaceable dust filter.• Built-in table lock.• Spring-loaded, adjustable height cutting head.• Heavy-duty cast aluminum rolling conveyor cart.• 14" dry cutting diamond blade.• One-year warranty.


CX-3® Model CX-3® Honda CX-3® Kohler CX-3® RobinEngine Honda (Gas) Kohler (Gas) Robin (Gas)Power GX160 Cyclone CH270 EX170Blade Capacity 14" (356mm) 14" (356mm) 14" (356mm)Blade RPM 3,600 3,600 3,600Arbor Size 1" (25mm) 1" (25mm) 1" (25mm)Depth of Cut (14" blade) 5-1/2" (140mm) 5-1/2" (140mm) 5-1/2" (140mm)L x W x H 32" x 19" x 42" (813 x 483 x 1,067mm)Weight 119 lbs. (54kg) 117 lbs. (53kg) 117 lbs. (53kg)

Features• Compact, lightweight, engineered for maneuverability and reliability.• Can be used for wet or dry cutting.• Corrosion resistant cast-aluminum blade guard.• Built-in water distribution system supplies water to both sides of blade.• Blade guard mounts on either left- or right-hand side of saw and cuts

within 1" of wall or curb.• Sturdy single piece steel motor mount weldment to minimize vibration.• 1" diameter blade shaft with self aligning bearings.• Hinged blade guard provides easy access for blade changes

and inspection.• Folding handle bar for compact transport.• Poly V-belt for positive power transmission.


Scan Combiflex Grinders Grind and polish concrete. Grind and polish terrazzo and natural stone floors. Remove coatings from floors. Sand wood floors. Water tank optional on all models. Remote controll (700RC only).

Technical specifications700RC 650 500i/500PD 45 180EG

Power 10 hp (7.5kW 6-pol) 10 hp (7.5kW) 5.3 hp (4kW) 2 hp (1.5kW) 2.9 hp (1.5kW)or 15 hp (11kW)

Amps 16 Amp, 3-phase / 16 Amp / 16 Amp, 3-phase / 30 Amp, 15 Amp, 18.7 Amp, 25 Amp, 3-phase 30 Amp, 3-phase 3-phase or 1-phase 1-phase 1-phase

Voltage 400-460V 400-460V / 400-460V / 110V - 120V 110V -120V230V 230V 3-phase or 1-phase

Frequency 60Hz 60Hz 60Hz 60Hz 60HzWeight 1,014 lbs. (460kg) 705 lbs. (320kg) 353 lbs. (160kg) 176 lbs. (80kg) 128 lbs. (58kg)Slip Facts:Abrasive Dia. 27.5" (700mm) 25.5" (650mm) 20" (500mm) 17.5" (450mm) 7" (180mm)Grinding Wheel Dia. 3x9.5" (3x240mm) 3x8" (3x210mm) 3x6" (3x100mm) 3x6" (3x150mm) 1x7" (1x180mm)Speed 300-900 rpm / 300-1100 rpm 300-1100 rpm 950 rpm 1500 rpm

300-1100 rpm


Scan Combiflex GrindersEasily Grind Concrete

Totally built of steel. Big disc powered by a gear wheel. No thin belts inside.

All parts inside are heavy-duty. Low maintenance. Easy to maneuver.

Scan Combiflex 45

Grind/polish terrazzo and natural stone floors.

Remove coatings up to 1/4" (7mm) thick.

Quickly sand wood floors with great results.

Scan Combiflex 650

Ecs catalog[2]

Documents

Transcript of Ecs catalog[2]