INDUSTRIAL MEASUREMENTIT‘S WHAT WE DO

QUALITY | SERVICE | COMMITMENT

ECM - Global Measurement SolutionsProud Partners of the National Physical Laboratoryhttp://eastcoastmetrology.com/products-and-services/training-and-certification/

ECM TRAINING FRAMEWORKGEOMETRIC DIMENSIONING AND TOLERANCINGINTERMEDIATE COURSEOur Intermediate GD&T course is intended for anyone who needs to understand the theory and practice of ASME Y14.5 – 2009 GD&T.

ECM - Global Measurement Solutions428-A Boston Street | Topsfield, MA 01983 | USA | Ph: (978) 887-5781 |info@eastcoastmetrology.com | www.eastcoastmetrology.com

Who should attend?The intermediate course is applicable to all industrial sectors as a stand-alone qualification, or as abuilding block for further ECM GD&T courses.Students should be familiar with bench measurement tools.

• Measurement Technicians• Machinists• Tool Builders• Quality Control• Manufacturing Engineering Personnel• Designers• Production Supervisors and Managers

Learning objectivesThe student will:• Apply geometrical tolerancing and measurement techniques by basic principles• Be able to make fundamental measurement calculations• Apply geometrical tolerancing and measurement techniques by coordinate measurement• Apply the fundamental principles of tolerancing

Return on investment• Reduction in the misinterpretation of GD&T requirements• A more efficient measurement strategy• Cost-savings through an upskilled workforce• Reduce the need to outsource measurement• Recognize best practice with bench measuring equipment • Recognize best practice with coordinate measurement equipment

Module detailsApply Geometrical Tolerancing andMeasurement Techniques by BasicPrinciples

• Recognize and implement the terminology used in geometric tolerancing• Be able to set datum types• Create datum reference systems• Apply tolerance types• Examine and apply tolerance frame requirements zone types, form, location, orientation, run-out an profile tolerances

Ability to Make Fundamental Measurement Calculations

• Make calculations against tolerance and zone types• Calculate the maximum material condition requirements

Apply Geometrical Tolerancing andMeasurement Techniques by Coordinate Measurement

• Recognize and implement the terminology used in geometric tolerancing• Be able to set datum types• Create datum reference systems• Apply tolerance types• Apply tolerance frame requirements, zone types, form, location, orientation, run-out and profile tolerances

INTERMEDIATE

GD&T Intermediate – Course Outline

ECM - Global Measurement Solutions428-A Boston Street | Topsfield, MA 01983 | USA | Ph: (978) 887-5781 |info@eastcoastmetrology.com | www.eastcoastmetrology.com

• Apply GD&T Related Principles • Standards and governing organizations • Feature Control Frames • Datums • Basic dimensions • Tolerances per unit length

• Apply Tolerances of Form • Straightness • Flatness • Roundness • Cylindricity

• Apply Tolerances of Orientation • Parallelism • Perpendicularity • Angularity

• Apply Tolerances of Location • Position • Position with Feature MMC • Concentricity • Symmetry

• Apply Tolerances of Runout • Circular Runout

• Total Runout

• Apply Tolerances of Profile • Profile of a line • Profile of a surface

• Apply Composite Tolerances of Location • Composite Tolerance Frames • Multiple Single Frames • Apply Coordinate Measurement and GD&T

Medical Aerospace ShipbuildingEnergy

www.EastCoastMetrology.com

ECM Global Measurement Solutions (East Coast Metrology, LLC.)428-A Boston Street

Topsfield, MA 01983 USA(978) 887-5781 - info@eastcoastmetrology.com

ISO 9001 & 17025

ECM - Global Measurement Solutions (ECM) specializes in 3D Measurement Services, Technical Training, Instrument Rental and Calibration. ECM is ISO 9001:2008 registered and our laboratory is accredited to ISO/IEC 17025:2005 standard by American Association for Laboratory Accreditation (A2LA). ECM is heavily involved in Educational Outreach to Schools and Universities working with

non-profit organizations such as National Conference of Standard Laboratories International(NCSLI) to grow industry awareness. ECM has recently been chosen as the sole North American training provider for the National Physical Laboratory (NPL). With our roots extending back to the beginning, ECM continues to be actively involved in the Coordinate Metrology Society (CMS). Our

highly trained instructors consistently deliver quality training solutions that are innovative,practical and industry proven, giving our customers the competitive edge they need. When you choose ECM as your training provider, you get the benefit of an experienced staff and training

guaranteed to be of the highest standard in the industry.