Eclipse C3 Aluminum Folding Door System · C3 Extrusions: Extruded Aluminum 6063-T5. C3 Extrusion...
Transcript of Eclipse C3 Aluminum Folding Door System · C3 Extrusions: Extruded Aluminum 6063-T5. C3 Extrusion...
Eclipse C3 Aluminum Folding Door System, C3 Fabricator to Dealer Brochure • Revision (4)
Eclipse C3 Aluminum Folding Door System
Dealer Brochure 2012
®
Exterior folding door systemswww.eclipsearchitectural.com
2 © Copyright 2013 • DS Group® & Eclipse Architectural®
Specifications
In a single direction:
Maximum Panel Weight: 220 lbs (100kg) each panelMinimum Panel Width: 24” (609mm)Maximum Panel Width: 39” (990 mm)Minimum Panel Height: 32” (813mm)Maximum Panel Height: 120” (3048mm)C3 Door Thickness: 2-1/4” (57.15mm) Maximum # of Doors: 8 each way = 16 panels = 52 ft (15.8m) total.
C3 Exterior Aluminum Folding Door System (Not thermally broken)
with E3C Eclipse Architectural Hardware
NOTE: When using maximum panel width & height 39” x 120” (990 mm to 3048 mm) panel may exceed maximum panel weight of 220 lbs (100kg). Calculated weight check should be done. Panel heights of 120” (3048mm) and over may fall under the weight restrictions.
C3 Extrusions: Extruded Aluminum 6063-T5.C3 Extrusion Finishes:
1. a) Clear & b) Bronze anodized finishes are Class 1.2. a) Standard Mill Finish available for custom colors from
Eclipse. 3. a) White Powder Coat finish: D2000-AAMA 2604 (5 year
Florida) 15 year MFG’s warranty.4. a) Custom Powder Coat finishes available D3000-AAMA
2605 (10 year Florida) 20 year MFG’s warranty.5. a) Wood Grain finishes (custom): AAMA 2604 (5 year Florida)
10 year MFG’s warranty.E3COM Hardware: Stainless Steel (304SS) Components with Aluminum hinges.C3 Twinpoint Hardware: Stainless Steel (304SS) & Aluminum Components.C3 Lever Lock Sets: F-2 Sets Powder Coat over Brass.DSD Multi-point Door Locks: Faceplate, latch and hooks are 304SS.
Eclipse WarrantyThe Eclipse program is a complete product offering. Component deletions and/or substitutions are strictly prohibited. Warranty is void if system has missing or substitute products. Please refer to www.thedsgroup.com/terms for our full warranty information, terms & conditions, returns & allowances, claims policy, and other general information.
PLEASE NOTE: For technical reasons associated with color reproduction, the colors shown on this brochure give only an indication of color & finish. No warranty or guarantee can be given that they will exactly match the product as supplied.
Clear Anodized Bronze AnodizedWhite Powder Coat
3 Standard Frame & Door Panel Finishes:
Custom finishes available on our website: www.eclipsearchitectural.comCall for manufacturing time.• 19 Custom Wood Grain finishes available (not shown)• 31 Solid Colors: Custom powder coat finishes available (not shown)• 18 Metallic Custom Powder coat finishes available (not shown)
Choose from hundreds of configurations, some examples below:
2L
1L2R
3L1R
4L
2L2R
4L1R
3L3R
7L
8R
INSIDEOUTSIDE
INSIDEOUTSIDE
INSIDEOUTSIDE
INSIDEOUTSIDE
INSIDEOUTSIDE
INSIDEOUTSIDE
INSIDEOUTSIDE
INSIDEOUTSIDE
INSIDEOUTSIDE
© Copyright 2013 • DS Group® & Eclipse Architectural® 3
NO SCALE
Top 10 Cool Custom Features of our Folding Door System
top pivot
aluminum & glass max. weight 176 lb (80kg) per panel
hinge
top pivot
wall pivot
hinge with handle
bottom pivot
hinge
concealed intermediate guide
C3 hinge gasket
active door
bottom pivot
wall pivot
1L3R
lever lock set
twinpoint
intermediate carrier
C3 multi-point astragal
weatherseals
door panel corner key
1
10
3
3
5 - 7
8
2
93
4
active lock set
B
A
C
Multi-point Door Lock
• (3 hooks) + top & bottom shootbolts = 5 point• 3 Hook Model for door heights of up to
95-15/16” (2437 mm)• 4 Hook Model for door heights of 96”
(2438.4mm) or over.
A Lever Lock Set B Carrier & Hinge C Twinpoint Handle
A, B & C available in white, satin, black & bronze powder coat finishes.
1. New state of the art Twinpoint hardware in stainless steel (304SS)
2. Five point or six point MK2 Multi-point door lock (304SS)
3. New E3C Folding door hardware by Centor
4. Colour coordinated lever lock sets for active & adjoining panels
5. All Extruded Aluminum profiles specific to the C3 Folding Door System
6. All Aluminum Profiles are available in anodized class 1
7. All Aluminum Profiles are available in Powder Coat finishes (custom)
8. Door panels designed to hold S.G., I.G. or H.G.
9. Door Panel Corner Key makes for easy assembly
10. Dual weatherseals on head, jamb, sill & between each panel
4 © Copyright 2013 • DS Group® & Eclipse Architectural®
4-1/2” (114mm)
1-7/8”(48mm)
3-13/32”(87mm)
1-7/32” (31mm)
13-64” (5mm)
T astragalor MP astragal
13/64”(5mm)
5/64”(2mm)
1”(25.4mm)
5/64”(2mm)
2-13/32”(61mm)
19/32”(15mm)
23/32”(18.5mm)
9/32”(7mm)
23/32”(18mm)
2-1/4”(57mm)
1”(25.4mm)
13-64” (5mm)
Pile A/B seal applied to topand bottom of
astragal
1-5/32”(29mm)
weep holes
25/64”(10mm)
19/32”(15mm)
13/64”(5mm)
25/64”(10mm)
Panel to Sill Detail
4-1/2” (114mm)
1-7/8”(48mm)
3-13/32”(87mm)
1-7/32” (31mm)
13-64” (5mm)
T astragalor MP astragal
13/64”(5mm)
5/64”(2mm)
1”(25.4mm)
5/64”(2mm)
2-13/32”(61mm)
19/32”(15mm)
23/32”(18.5mm)
9/32”(7mm)
23/32”(18mm)
2-1/4”(57mm)
1”(25.4mm)
13-64” (5mm)
Pile A/B seal applied to topand bottom of
astragal
1-5/32”(29mm)
weep holes
25/64”(10mm)
19/32”(15mm)
13/64”(5mm)
25/64”(10mm)
NO SCALE
C3 Cross Section
EXTERIOR EXTERIORINTERIOR INTERIOR
Outswing (System Tested 3L1R) (Not thermally broken) Inswing
© Copyright 2013 • DS Group® & Eclipse Architectural® 5
NO SCALE
Ferraro 2 Series Lever Lock SetMulti-point Door Lock
E3C Intermediate Carrier (shown)
Available Finishes: (Powder Coat over Brass)
Available Finishes (Hinges):
• White Powder Coat• Satin Aluminum Powder Coat• Black Powder Coat• Bronze Powder Coat
• White Powder Coat• Clear Anodized Aluminum (Satin)• Black Powder Coat• Bronze Powder Coat
DF3 (Aluminum TwinPoint Swing Handle) Finishes • DF4 Finishes (On Stainless Steel)
White Powder Coat
Satin Aluminum Powder Coat
Black Powder Coat
Bronze Powder Coat
PVD Bronze over Stainless Steel
Brushed Stainless Steel
Twinpoint assembly is used in securing each pair of folding panels in the closed position. Not used on the swing (active) panel.
Twinpoint & Swing Handle
Twinpoint & Swing Handle
Twinpoint & Swing Handle
Multipoint &Lever Lock Set
4L 3L
PLEASE NOTE: For technical reasons associated with color reproduction, the colors shown on this brochure give only an indication of color & finish. No warranty or guarantee can be given that they will exactly match the product as supplied.
6 © Copyright 2013 • DS Group® & Eclipse Architectural®
9/16”14.3mm
1/4”6.0mm
1/4”6.0mm
0.09”2.3mm
Glazing block by other
Interlay
Interlay
HALF SCALE EXCEPT AS NOTED
Glazing Details
C3 Optional Panel to Sill Details, Cross Section View (outswing) • Panel to sill (water return) detail shown on page 4.
INTERIOREXTERIOR
Panel to Floor Channel Detail
finished floor line
Glazing Block by other
3/8” (10mm)
7/8” (22.1mm)
19/64” (7.4mm)
brushed sweep
11/16 (17.5mm)
7/16 (11.1 mm)
prod# DS158
Panel to ADA Sill Detail
INTERIOREXTERIOR
finished floor line
blockoutflooring forsill channel
finished floor line
3/8” (10mm)
19/64” (7.4mm)
brushed sweep
11/16 (17.5mm)
7/16 (11.1mm)
prod# DS158
glazing block by other
1/2”12.7mm
1/4”6.4mm
1/4”6.4mm
Glazing blocksby other
S.G. (Single Glazing)
top & bottom rail
NO SCALE
EC3REDUCER6G
15/16”24mm
3/16”4.0mm
3/16”4.0mm
5/8”15.8mm
Glazing blocksby other
I.G. (Insulated Glass)
top & bottom rail
NO SCALE
EXTERIOR (outswing system)EXTERIOR (outswing system)
EXTERIOR (outswing system)
EXTERIOR (outswing
system)
EXTERIOR (outswing
system)
EXTERIOR (outswing
system)
H.G. (Hurricane Glass)
common door stilecommon door stile
common door stile
top & bottom railNO SCALE
EC3REDUCER14G
Hurricane Glass= 7.1 Lbs / Ft²
61/64”24mm
4-1/2” (114mm)
2-17/64”(57.61mm)
1-5/32”(29mm)
C3 Standard Sill
© Copyright 2013 • DS Group® & Eclipse Architectural® 7
FULL SCALE EXCEPT AS NOTED
Authorized Fabricator / Distributor
3L1R Outswing SystemCAN / CGSB 82.1-M89Air: A2Water Leakage Resistance: B4 (510 PA)Wind Load Resistance: C3
AAMA / WDMA / CSA 101 / I.S.2 / A440-08 • NAFS-08Air Infiltration: A2Water Leakage Resistance: DP70 (510 PA) or PG70 • C3 Storm 45, 70, series and C3 H100 seriesWind Load Resistance: DP70 (3360 PA) (Enhanced System) or PG70 • C3 Storm 70 SeriesWind Load Resistance: DP45 (2160 PA) (Standard System) or PG45 • C3 Storm 45 SeriesWind Zone 4 (Hurricane) ASTM (cycling) E1996: DP100 (C3 H100 Series)Wind Zone 4 (Hurricane) ASTM (impact) E1886: Pass (C3 H100 Series)
Test Performance • Met all requirements
For full test results, please visit www.eclipsearchitectural.com
2406 Canoe Ave, Coquitlam BC V3K 6C2P. (604) 941-6693 F. (604) 941-6694www.woodwindows.ca