EC997 MC/QUAD - Chassis Dynamometer and Engine...
1
www.mustangdyne.com 2300 Pinnacle Parkway, Twinsburg, Ohio 44087 Ph: 330-963-5400 • Toll Free: 888-468-7826 Email: [email protected] EC997 MC/QUAD EC997 MC/QUAD Horsepower: 750-hp peak measurement capacity 450-hp peak absorption Loading Device: Air-cooled eddy current power absorber (model MDK-70) Inertia: 204 lbs. - MC Mode / 450 lbs. ATV Mode Max Speed: 200-mph MC Mode / 150-mph ATV Mode Controls: Closed Loop Digital Controller with WindowsXP based PowerDyne Software. Includes Patented Virtual Road Simulation Technology (RST) Rolls/Wheelbase: Precision machined & dynamically balanced rolls. Knurled finish for superior tire traction. 12.625” diameter rolls. 19.8” / 30.5” face length 15.63” inner track width 66” outer track width Roll Lock: Industrial brake pad in contact with OD of roll Roll Decelerator: Allows vehicle deceleration without use of vehicle brakes. Eddy Current PAU used to decelerate rollers. Air Requirements: 100 PSI, dry, regulated, oil free Power Requirements: 115 VAC, single phase, 60 Hz, 15 Amps (computer) 230 VAC, single phase, 60 Hz, 40 Amps (dynamometer) Shipping Weight: 1,000 lbs. (dynamometer weight only) Specifications THE EC997 MC/QUAD. The ultimate motorcycle/ATV performance dyno. The EC997 MC/QUAD Series is is a specially designed low inertia motorcycle/ATV combination dyno. The low inertia and powerful eddy current loading capabiliites are perfect for precision tuning and diagnostic applications. Factory Pro and Mustang’s MC/QUAD Dyno is a specially designed, high-speed, low-inertia motorcycle/QUAD/Kart combination dyno. The low inertia design and eddy current loading features are perfect for precision tuning and diagnostic applications. The base mechanical inertia of the EC997 MC/ QUAD is perfectly matched for testing lightweight cycles and quads, while the powerful eddy current power absorption unit provides enough muscle to apply a serious load for steady state testing applications. Quickly and easily diagnose performance problems, break in engines, perform EFI mapping and much more. Mustang has delivered thousands of performance dynamometer systems over the past 35 years and has perfected the art and science of dynamic vehicle loading and dynamometer control. While other dyno manufactures are still trying to catch up with our technology, Mustang continues to lead the industry and is recognized around the world as the industry’s best with regards to dynamic dynamometer controls. The EC997 MC/QUAD Series is also available with a set of high- speed 19.75” rollers for applications that demand speeds over 200-mph. Quickly and easily diagnose performance problems, break in engines, perform EFI mapping and much more. Available options include above ground kits, portable models, automatic restraint systems and adjustable vehicle cooling fans. • SmartTach Engine RPM • Temperature Sensors • Pressure Sensors • Weather Station • Air to Fuel Ratio Modules • 4 or 5 Gas Analyzer • Optical RPM Pick-up • Above Ground Kit • Above Ground Ramps • Integrated Xmas Tree • On-Site Training • Touchscreen Interface • Engine Cooling Fan • TS1 Coil Pickup • ATV Kit • Electric restraint adjustment Options & Hardware © 2016 Mustang Dynamometer ® DYNAMOMETER 12.625” Rollers, 200-mph, 750-hp, 407 lbs. Base Inertia in ATV Mode MC/ATV Chassis Dynamometer
Transcript of EC997 MC/QUAD - Chassis Dynamometer and Engine...
www.mustangdyne.com2300 Pinnacle Parkway, Twinsburg, Ohio 44087
Ph: 330-963-5400 • Toll Free: 888-468-7826Email: [email protected]
EC997 MC/QUAD
EC997 MC/QUAD
Horsepower: 750-hp peak measurement capacity450-hp peak absorption
Loading Device: Air-cooled eddy current power absorber (model MDK-70)
Inertia: 204 lbs. - MC Mode / 450 lbs. ATV Mode
Max Speed: 200-mph MC Mode / 150-mph ATV Mode
Controls:Closed Loop Digital Controller with WindowsXP based PowerDyne Software. Includes Patented Virtual Road Simulation Technology (RST)
Rolls/Wheelbase:
Precision machined & dynamically balanced rolls. Knurled finish for superior tire traction.12.625” diameter rolls.19.8” / 30.5” face length15.63” inner track width66” outer track width
Roll Lock: Industrial brake pad in contact with OD of roll
Roll Decelerator: Allows vehicle deceleration without use of vehicle brakes. Eddy Current PAU used to decelerate rollers.
Air Requirements: 100 PSI, dry, regulated, oil free
Power Requirements: 115 VAC, single phase, 60 Hz, 15 Amps (computer)230 VAC, single phase, 60 Hz, 40 Amps (dynamometer)
Shipping Weight: 1,000 lbs. (dynamometer weight only)
Specifications
THE EC997 MC/QUAD. The ultimate motorcycle/ATV performance dyno.
The EC997 MC/QUAD Series is is a specially designed low inertia motorcycle/ATV combination dyno. The low inertia and powerful eddy current loading capabiliites are perfect for precision tuning and diagnostic applications.
Factory Pro and Mustang’s MC/QUAD Dyno is a specially designed, high-speed, low-inertia motorcycle/QUAD/Kart combination dyno. The low inertia design and eddy current loading features are perfect for precision tuning and diagnostic applications. The base mechanical inertia of the EC997 MC/QUAD is perfectly matched for testing lightweight cycles and quads, while the powerful eddy current power absorption unit provides enough muscle to apply a serious load for steady state testing applications. Quickly and easily diagnose performance problems, break in engines, perform EFI mapping and much more.
Mustang has delivered thousands of performance dynamometer systems over the past 35 years and has perfected the art and science of dynamic vehicle loading and dynamometer control. While other dyno manufactures are still trying to catch up with our technology, Mustang continues to lead the industry and is recognized around the world as the industry’s best with regards to dynamic dynamometer controls.
The EC997 MC/QUAD Series is also available with a set of high-speed 19.75” rollers for applications that demand speeds over 200-mph. Quickly and easily diagnose performance problems,break in engines, perform EFI mapping and much more. Available options include above ground kits, portable models, automatic restraint systems and adjustable vehicle cooling fans.
• SmartTach Engine RPM• Temperature Sensors• Pressure Sensors• Weather Station• Air to Fuel Ratio Modules• 4 or 5 Gas Analyzer• Optical RPM Pick-up• Above Ground Kit
• Above Ground Ramps• Integrated Xmas Tree• On-Site Training• Touchscreen Interface• Engine Cooling Fan• TS1 Coil Pickup• ATV Kit• Electric restraint adjustment
Options & Hardware
© 2016 Mustang Dynamometer
®
DD YY NN AA MM OO MM EE TT EE RR
12.625” Rollers, 200-mph, 750-hp, 407 lbs. Base Inertia in ATV Mode MC/ATV Chassis Dynamometer
