Ebrochure quickship

14
Cantilever Racking Partitions Mezzanines Guardrails Lockers QuickShip In Stock. Ready To Ship. or Accelerated Delivery. ®

description

www.cogan.com

Transcript of Ebrochure quickship

Page 1: Ebrochure quickship

Cantilever Racking

Partitions

Mezzanines

Guardrails

Lockers

QuickShipIn Stock. Ready To Ship.or Accelerated Delivery.

®

Page 2: Ebrochure quickship

1

QuickShipIn Stock. Ready To Ship.or Accelerated Delivery.

Cogan QuickShip is all about you – your needs, your budget, your timeline. No waiting. No delays. Cogan QuickShip is on time, all the time.

Page 3: Ebrochure quickship

HE AVY-DUTY GUARDRAILS

SPECIFICATIONS12-gauge steel / unassembled componentsAbsorbs impact of a 10,000 lb load at 4 mph. 12-gauge roll-formed steel, 12” high profile, 3/16” thick end plates punched with two ø9/16” connection holes. 5“ x 5” seam welded square columns welded to a 10” x 10” x 1/2” baseplate with ø3/4” mounting holes. Black plastic post caps. Install with floor an-chors (sold separately). IN STOCK.

Item Description Item #A. Rails2’ Rail (19” exact length) QS-GR23’ Rail (31” exact length) QS-GR34’ Rail (43” exact length) QS-GR45’ Rail (55” exact length) QS-GR56’ Rail (67” exact length) QS-GR67’ Rail (79” exact length) QS-GR78’ Rail (91” exact length) QS-GR89’ Rail (103” exact length) QS-GR910’ Rail (115” exact length) QS-GR10B. Columns & Accessories Double Rail Column (centered baseplate) QS-GPDCDouble Rail Column (offset baseplate) QS-GPDOSingle Rail Column (centered baeplate) QS-GPSCSingle Rail Column (offset baseplate) QS-GPSOLift-Out Brackets (pair) QS-GL15/8” x 4 1/2” Floor Anchors (4x/pkg) QS-GFA5

MATERIAL FOR THIS DOUBLE RAIL SYSTEM4x: Double rail column (centered baseplate)1x: Double rail column (offset baseplate)4x: 10’ rail2x: 3’ rail2x: 2’ rail

10’-0” C/C dimension 10’-0” C/C dimension 2’-0” C/Cdimension

OVERALL DIMENSION (incl. baseplates) 22’-10”

3’-0

” C/C

dim

ensi

on

O.D.

(inc

l. ba

sepl

ates

)3’

-7 1

/2”

FINISHPowder-coated safety yellow

SPECIFICATIONSFits any upright widthCurved crescents fit around rack corners to protect from impact damage. 12”H x 3/8” steel crescent plate welded to 3” x 5” x 1/4” steel angle. ø3/4” bolt holes accept floor anchors (sold separately). Available in single- or dou-ble-sided wrap around. IN STOCK.

Rail

Item Description Item #24” Left Rack Aisle Protector QS-RP24L24” Right Rack Aisle Protector QS-RP24R42” Left Rack Aisle Protector QS-RP42L42” Right Rack Aisle Protector QS-RP42R54” Left Rack Aisle Protector QS-RP54L54” Right Rack Aisle Protector QS-RP54R48” Double-Sided Rack Aisle Protector QS-RPD485/8” x 4 1/2” Floor Anchors (3x/pkg) QS-GFA3

FINISHPowder-coated safety yellow

Rack Aisle Protectors

Single-Sided Wrap Around Double-Sided Wrap Around

QuickShipIn Stock. Ready to Ship

length length

existingracking existing racking

Double RailColumn

Single RailColumn

44”

18”

CenteredBaseplate

OffsetBaseplate

Lift-outBracket

12”

2

Page 4: Ebrochure quickship

47”or 59”

WIRE MESH RACK GUARDS Plan View of Racking

94” panel for 96” rack beam106” panel for 108” rack beam118” panel for 120” rack beam

Bracket

6”, 8” or12” offset

BollardsSPECIFICATIONS1/8” thick steel tube4 1/2“ or 6” diameterSturdy welded base-plate is made of 1/2” thick steel plate. In-cludes ø3/4” bolt holes for floor an-chors (sold separate-ly). Black plastic top cap. IN STOCK.

FINISHPowder-coated safety yellow

24”36” or42”

42”

10”10”

12”12”

4 1/2”6”

Item Description Item # 24” High Bollard (4 1/2” dia. + QS-B2410” x 10” baseplate) 36” High Bollard (4 1/2” dia. + QS-B3610” x 10” baseplate)42” High Bollard (4 1/2” dia. + QS-B4210” x 10” baseplate)42” High Bollard (6” dia. + QS-B64212” x 12” baseplate)5/8” x 4 1/2” Floor Anchors QS-GFA1(4x/pkg)

Rack Post ProtectorsSPECIFICATIONS3/16” thick steelFits up to a 5”W upright8 1/4”W x 6”D baseplateø5/8” bolt holes. Flooranchors sold separately. Easy installation. IN STOCK.

FINISHPowder-coatedsafety yellow 12”

18” or24”

5 1/4”

6”

8 1/4”

Item Description Item #12”H Rack Post Protector QS-RP1218”H Rack Post Protector QS-RP1824”H Rack Post Protector QS-RP241/2” x 4 1/4” Floor Anchors QS-GFA4(4x/pkg)

SPECIFICATIONSAll-welded angle frame2” x 2” x 10GA welded wire meshOffset mounting bracketsForm a sturdy wall of protection be-tween your workers and your invento-ry. Rigid and resilient, rack guards bolt directly to racking uprights, placing a barrier between stored materials and picking aisles below. IN STOCK.

FINISHPowder-coatedCogan grey 94”, 106” or 118”

Item Description Item #A. Rack Guard Panels8’W x 4’H QS-W848’W x 5’H QS-W859’W X 4’H QS-W949’W x 5’H QS-W9510’W x 4’H QS-W10410’W x 5’H QS-W105B. Brackets (sold separately)8” Bracket (for 6” offset) QS-CMBS0610” Bracket (for 8” offset) QS-CMBS0814” Bracket (for 12” offset) QS-CMBS12

* 4 brackets are required per panel.

4”

QuickShipIn Stock. Ready to Ship

3

Page 5: Ebrochure quickship

QuickShipIn Stock. Ready to Ship

ORIGINAL WIRE MESH PARTITIONS

Layout Example(Plan View)

Item Description Item #A. PanelsStandard Panel 2’W x 4’H QS-P024(exact size 22”W x 47”H)Standard Panel 3’W x 4’H QS-P034(exact size 34”W x 47”HStandard Panel 4’W x 4’H QS-P044(exact size 46”W x 47”H)Standard Panel 5’W x 4’H QS-P054(exact size 58”W x 47”H)Standard Panel 6’W x 4’H QS-P064(exact size 70”W x 47”H)Standard Panel 8’W x 4’H QS-P084(exact size 94”W x 47”H)Standard Panel 10’W x 4’H QS-P104(exact size 118”W x 47”H)Adjustable Flex Panel QS-PFP1 (2” to 12” x 8’H)B. Posts (8’ high) Original Partition Line Post QS-PPL08Original Partition Corner Post QS-PPC08Floor Anchors 3/8” x 2 3/4” QS-FAEF11(4x/pkg)

Std. panels are stacked tocreate 8’H sections:(1) 10’ x 8’ panel section =(2) 10’ x 4’ standard panels Layout Example

(Elevation View)

FINISHPowder-coated Cogan grey

10’ x 8’ panelsection

4’ x 8’ panelsection

4’ x 8’swing gate

Flex panel

5’ x 8’ panelsection

23’ C/C dimension

8’

10’ 4’ 4’ 5’Adjustabledimension

GatesSPECIFICATIONSMade of 2” x 2” x 10GA welded wire mesh framed in 1 1/4” x 1 1/4” x 12GA structural angle with two welded ø1/2” reinforcement rods. Padlock hasp and hinges included. Track is included for sliding doors.

Item Description Item #A. Single Swing Gates (C/C width)Single Hinge Gate 3’W x 8’H QS-P-D-SH-3x8Single Hinge Gate 4’W x 8’H QS-P-D-SH-4x8B. Double Swing Gates (C/C width)Bi-Parting Hinge Gate 6’W x 8’H QS-P-D-BPH-6x8Bi-Parting Hinge Gate 8’W x 8’H QS-P-D-BPH-8x8C. Sliding Gates (C/C width)Single Slide Gate 3’W x 8’H QS-P-D-SS-3x8Single Slide Gate 4’W x 8’H QS-P-D-SS-4x8Single Slide Gate 5’W x 8’H QS-P-D-SS-5x8Single Slide Gate 6’W x 8’H QS-P-D-SS-6x8Single Slide Gate 8’W x 8’H QS-P-D-SS-8x8Single Slide Gate 10’W x 8’H QS-P-D-SS-10x8D. Dutch Gates (C/C width)Dutch Gate 3’W x 8’H QS-P-D-D-3x8Dutch Gate 4’W x 8’H QS-P-D-D-4x8E. Lock OptionsCylinder Lock - Latch & Key for QS-P-PLC002Swing & Dutch (keyed differentt)Cylinder Lock - Latch & Key for QS-P-PLC006Sliding Gates (keyed different)

Single SwingGate

Double SwingGate

SlidingGate

DutchGate

MATERIAL FOR STANDARD 2-WALL PARTITION SYSTEM2x: Standard panel 8’ x 4’ 2x: Standard panel 5’ x 4’2x: Standard panel 10’ x 4’ 1x: Adjustable flex panel2x: Standard panel 4’ x 4’ 5x: Line post 8’ 1x: Single swing gate 4’ x 8’ 1x: Corner post 8’

8’

C/C width

8’ x

8’ p

anel

sect

ion

Lock Options

Padlock Hasp Cylinder Lock

Standard padlock hasp(padlock by others).No charge. Included with all doors.

Optional cylinderlock (latch & key).Additional charges apply,

8’ 8’ 7’

C/C width C/C width C/C widthgate opening =C/C width - 2

10’ x 4’std. panel

10’ x 4’std. panel

4’ x 4’std. panel

4’ x 4’std. panel

5’ x 4’std. panel

5’ x 4’std. panel

Framed 2” x 2” x 10GAwelded wire mesh

SPECIFICATIONS2” x 2“ x 10GA welded wire mesh panels framed in 1 1/4” x 1/4“ x 12GA structural angle with ø1/2” reinforcment rods.2 “ x 2” seam welded square tube posts welded to 6” x 6” baseplate / 4” sweepCreate secure and reliable work or storage space exactly where you need it. All-steel construction is wear-resistant and maintenance-free. Open wire mesh design allows air to circulate and light to penetrate fully. Modular nut-and-bolt assembly. Floor anchors sold separately. IN STOCK.

4

1’

Page 6: Ebrochure quickship

Panels & PostsItem Description Item #A. PanelsRobotic Machine Guarding Panel 10”W x 7’-2”H QS-PAN1086Robotic Machine Guarding Panel 1’-0”W x 7’-2”H QS-PAN1286Robotic Machine Guarding Panel 1’-6”W x 7’-2”H QS-PAN1886Robotic Machine Guarding Panel 2’-0”W x 7’-2”H QS-PAN2486Robotic Machine Guarding Panel 2’-6”W x 7’-2”H QS-PAN3086Robotic Machine Guarding Panel 3’-0”W x 7’-2”H QS-PAN3686Robotic Machine Guarding Panel 3’-6”W x 7’-2”H QS-PAN4286Robotic Machine Guarding Panel 4’-0”W x 7’-2”H QS-PAN4886Robotic Machine Guarding Panel 4’-8”W x 7’-2”H QS-PAN5686Robotic Machine Guarding Panel 5’-0”W x 7’-2”H QS-PAN6086B. PostsRobotic Machine Guarding 4-Way Post QS-P90Floor Anchors 3/8” x 2 3/4” (4x/pkg) QS-FAEF12

7’-2”H

4”sweep

90”H

6”

6”

Baseplate

Posts are punched on all 4 sides to be used as line or corner posts.

Single Swing DoorItem Description Item #Robotic Machine Guarding Single Hinge QS-Porte3684Door 3’W x 7’-2”H (transom tube included)

* Lock interlock available upon request

Door width

4”sweep

7’-6”H

SPECIFICATIONS2” x 1” x 10GA welded wire mesh doors framed in 1 1/4” x 1 1/4” x 12GA structural angle with two welded ø1/2” reinforcement rods.All Robotic machine guarding doors are equipped with a padlock hasp and hinges.

MATERIAL REQUIRED FOR STANDARD 3-WALL SYSTEM4x: 5’0” x 7’2” panel 2x: 4’0” x 7’2” panel 9x: 7’6” post1x: 1’0” x 7’2” panel 1x: 3’0” x 7’2” door (transom tube included)

swing door

1’ 3’ 4’ 4’

13’-2” overall dimension

5’5’

10’-1

0” o

vera

ll di

men

sion

7’-6”H

1’ 3’ 4’ 4’

Layout Example(Plan View)

Layout Example(Elevation View)

QuickShipIn Stock. Ready to Ship

Framed 2” x 1” x 10GAwelded wire mesh

5

MACHINE GUARDING

FINISHPanels & Doors PostsPowder-coated Powder-coatedmidnight black safety yellow

SPECIFICATIONS2” x 1” x 10GA welded wire mesh panels framed in1 1/4 x 1 1/4” x 12GA structural angle with one welded ø1/2” reinforcement rod.2 “ x 2” seam welded square tube posts welded to 6” x 6” baseplate / 4” sweepMachine guarding protects your personnel from the potential hazard of operating or working near moving machinery. Sturdy all-steel construction is wear-resistant and maintenance-free. Modular nut-and-bolt assembly. IN STOCK.

Page 7: Ebrochure quickship

SPECIFICATIONSStarter and add-on units / Single or double-tier configuration 2” x 2” x 10GA welded wire mesh side panels and doors framed in 1 1/4“ x 1 1/4” x 12GA structural angle. Doors feature one welded ø1/2“ reinforcement rod. Back & roof panels unframed 2” x 2” x 6&8GA galvanized welded wire mesh with 1 1/4“ x 1 1/4” transom angleRaised support legs provide 2” sweep Engineered to withstand the rigorous demands of daily use, Cogan QuickShip industrial lockers are your ultimate custom storage solution. Configure lockers to meet your exact needs. Mix and match single- and double-tier units for a completely unique layout. The open wire mesh design allows for proper ventilation and full light penetration. Your property remains secure and in constant view. 1-2 weeks delivery.

INDUSTRIAL STORAGE LOCKERS

FINISHSide Panels & Doors Back & Roof PanelsPowder-coated Cogan grey Electro-galvanized

Item Description Item #A. Single Tier Starter UnitsSingle Tier Starter Unit 7’-6”H x 3’-0”W x 3’-0”D QS-STL-133Single Tier Starter Unit 7’-6”H x 3’-0”W x 4’-0”D QS-STL-134Single Tier Starter Unit 7’-6”H x 3’-0”W x 5’-0”D QS-STL-135Single Tier Starter Unit 7’-6”H x 4’-0”W x 3’-0”D QS-STL-143Single Tier Starter Unit 7’-6”H x 4’-0”W x 4’-0”D QS-STL-144Single Tier Starter Unit 7’-6”H x 4’-0”W x 5’-0”D QS-STL-145B. Single Tier Add-On UnitsSingle Tier Add-On Unit 7’-6”H x 3’-0”W x 3’-0”D QS-ASTL-133Single Tier Add-On Unit 7’-6”H x 3’-0”W x 4’-0”D QS-ASTL-134Single Tier Add-On Unit 7’-6”H x 3’-0”W x 5’-0”D QS-ASTL-135Single Tier Add-On Unit 7’-6”H x 4’-0”W x 3’-0”D QS-ASTL-143Single Tier Add-On Unit 7’-6”H x 4’-0”W x 4’-0”D QS-ASTL-144Single Tier Add-On Unit 7’-6”H x 4’-0”W x 5’-0”D QS-ASTL-145C. Double Tier Starter UnitsDouble Tier Starter Unit 7’-6”H x 3’-0”W x 3’-0”D QS-DTL-133Double Tier Starter Unit 7’-6”H x 3’-0”W x 4’-0”D QS-DTL-134Double Tier Starter Unit 7’-6”H x 3’-0”W x 5’-0”D QS-DTL-135Double Tier Starter Unit 7’-6”H x 4’-0”W x 3’-0”D QS-DTL-143Double Tier Starter Unit 7’-6”H x 4’-0”W x 4’-0”D QS-DTL-144Double Tier Starter Unit 7’-6”H x 4’-0”W x 5’-0”D QS-DTL-145D. Double Tier Add-On UnitsDouble Tier Add-On Unit 7’-6”H x 3’-0”W x 3’-0”D QS-ADTL-133Double Tier Add-On Unit 7’-6”H x 3’-0”W x 4’-0”D QS-ADTL-134Double Tier Add-On Unit 7’-6”H x 3’-0”W x 5’-0”D QS-ADTL-135Double Tier Add-On Unit 7’-6”H x 4’-0”W x 3’-0”D QS-ADTL-143Double Tier Add-On Unit 7’-6”H x 4’-0”W x 4’-0”D QS-ADTL-144Double Tier Add-On Unit 7’-6”H x 4’-0”W x 5’-0”D QS-ADTL-145E. Roof PanelsRoof Panel 3’-0”W x 3’-0”D QS-SL-RP-3636Roof Panel 3’-0”W x 4’-0”D QS-SL-RP-3648Roof Panel 3’-0”W x 5’-0”D QS-SL-RP-3660Roof Panel 4’-0”W x 3’-0”D QS-SL-RP-4836Roof Panel 4’-0”W x 4’-0”D QS-SL-RP-4848Roof Panel 4’-0”W x 5’-0”D QS-SL-RP-4860F. Back PanelsRoof Panel 3’-0”W x 7’-6”H QS-SL-BP-3690Back Panel 4’-0”W x 7’-6”H QS-SL-BP-4890

Layout Example(Back-to-Back Units)

optionalback panel

Double TierStarter Unit

Double TierAdd-On Unit

Single TierStarter Unit

Single TierAdd-On Unit

Adjustable FloorAnchoring Bracket (1 included per locker)

1 1/2” bolt for floor levellingadjustability (included withbacket)

Hole for wedgebolt anchor (wedgebolt anchor soldseparately)

Item Description Item #Wedge Bolt Anchor QS-SL-WAnchor 11 1/4” x 2 1/4”

* sold individually

optional roof panel

3’0” or 4’0” wide

7’-6” high +2” sweep

3’0”, 4’0” or5’0” deep

MATERIAL REQUIRED FOR ONE ROW OF BACK-TO-BACK LOCKERS2x: Double Tier Starter Units 3’-0”W x 3’-0”D 6x: Roof Panels 3’-0”W x 3’-0”D4x: Double Tier Add-On Units 3’-0”W x 3’-0”D 8x: Floor Anchoring Brackts3x: Back Panels 3’-0”W x 7’-6”H

QuickShipAccelerated Delivery

6

MACHINE GUARDING

Page 8: Ebrochure quickship

CA NTILVER RACKING

SPECIFICATIONSIdeal for storing short, long or awkwardly-shaped items, our cantilever racking is easy to install and space efficient, optimizing the productivity and profitability of your work environment. Features a special arm system designed for easy front loading withoutobstruction. Structrual steel components guarantee superior strength. All connections use high-strength structural grade bolts. Punched holes run the full height of each column for excellent adaptability and versatility2-3 weeks delivery

FINISHColumn Tower & Base Cogan grey Arms & Bracing Industrial highly adhesive Powder-coated fast dry alkyd enamel Cogan grey

Single-SidedColumn

Double-SidedColumn

12’ or 16’ high

109 1/4” overall depth60 5/8”

overall depth

ColumnsItem Description Item #A. ColumnsSingle-Sided Type 1 Column 12’H + 4’D Base w/ 8,000 lbs max load capacity (W12 x 16 column and base) QS-SST1C12 Single-Sided Type 1 Column 16’H + 4’D Base w/ 8,000 lbs max load capacity (W12 x 16 column and base) QS-SST1C16Double-Sided Type 1 Column 12’H + 4’D Base w/ 16,000 lbs max load capacity (W12 x 16 column and base) QS-DST1C12Double-Sided Type 1 Column 16’H + 4’D Base w/ 16,000 lbs max load capacity (W12 x 16 column and base) QS-DST1C16

Arms

48”

2” bolt spacing

4” armadjustment

1.5° incline

RemovableArm Stopper

12”

Item Description Item #Type 1 Arm 48”L w/ 2,000 lbs QS-4T1A4HDmax load capacity (4”HD StructuralI-Beam Profile w/ 1.5° incline)Removable Arm Stopper QS-RAS12(sold individually)

MAXIMUM COLUMN CAPACITYSingle-Sided Columns12’ High = 8,000 lbs 16’ High = 8,000 lbsDouble-Sided Columns 12’ High = 16,000 lbs 16’ High = 16,000 lbs (8,000 lbs per side) (8,000 lbs per side)

ARM CAPACITYArms have a maxmimum capacity of 2,000 lbs per arm.

4’ 4’

4’

QuickShipAccelerated Delivery

7

Page 9: Ebrochure quickship

Anchoring

2 floor anchorsper side

3 floor anchorsper side

How to Load Racking

should be 1/2 the load length

needs an addtional center support

1/4” load length

1/2” load length

1/4” load length

1/6” 1/3” 1/3” 1/6”

1/4” 1/4” 1/4”

Correct arm length

Incorrect arm length if load exceeds

Centeredor evenly

distributed

Tip load orexceeding load

(if tip load reduce towerand arm capacity by 2)

1/8” 1/8”

Bracing Configuration (Layout Example)Item Description Item #Cross-Brace Type 1 for columns 48” C/C QS-CBT148Horizontal Brace Type 1 for columns 48” C/C QS-HBT148Cross-Brace Type 1 for columns 60” C/C QS-CBT160Horizontal Brace Type 1 for columns 60” C/C QS-HBT160

Bracing Insturctions for 12’H ColumnsWhen bracing a 12’H run, the first and last bay must ALWAYS be secured with a cross-brace + horizontal brace. For all inside bays, alternate between a triple horizontal brace and a cross-brace + horizontal brace. Important: Even if the second-to-last bay is secured with a cross-brace + horizontal brace, the last bay must still be secured with the same.

Bracing Instructions for 16’H ColumnsWhen bracing a 16’H run, the first and last bay must ALWAYS be secured with a double cross-brace configuration. For all inside bays, alternate between a quadruple horizontal brace and a double cross-brace. Important: Even if the second-to-last bay is secured with a double cross-brace, the last bay must still be secured with the same.

Item Description Item #Floor Anchor Bolts 5/8” x 6” (sold individually) QS-FAB5/86

Single-sided columns require 4 floor anchor bolts per column.Double-sided columns require 6 floor anchor bolts per column.

Total # of Bays: 8Total # Cross-Braces: 10Total # Horizontal Braces: 12

Total # of Bays: 8Total # Cross-Braces: 5Total # Horizontal Braces: 14

DEFLECTIONThe spacing and quantity of arms has to be chosen to prevent deflection.Determine the quantity and required arm spacing by using wood block to simulate the arms.If you notice a deflection with 2 supports, try adding more support until the deflection is eliminated.

LOAD LENGTHThe load length must be divided equally according to the formulas shown here.Important: The load should overhang the end arms by no more than half the column spacing. This ensures even weight distribution.

ARM LENGTHThe depth of the material being stored must never exceed to full length of the arm.The load must always be evenly distributed from the front to the back of the arm. If this rule is not respected, arm capacities will be reduced.

48” or 60” C/Ccolumn spacing

8

Page 10: Ebrochure quickship

9

Item Description Item #Model 1 - Mezzanine 12’W x 16’D x 9’H clearance QS-Mezz1216Sunder the deck / 125 PSF / Solid steel deckModel 2 - Mezzanine 24’W x 16’D x 9’H clearance QS-Mezz2416Sunder the deck / 125 PSF / Solid steel deckModel 3 - Mezzanine 36’W x 16’D x 9’H clearance QS-Mezz3616Sunder the deck / 125 PSF / Solid steel deckModel 4 - Mezzanine 48’W x 16’D x 9’H clearance QS-Mezz4816Sunder the deck / 125 PSF / Solid steel deckModel 5 - Mezzanine 12’W x 32’D x 9’H clearance QS-Mezz1232Sunder the deck / 125 PSF / Solid steel deckModel 6 - Mezzanine 24’W x 32’D x 9’H clearance QS-Mezz2432Sunder the deck / 125 PSF / Solid steel deckModel 7 - Mezzanine 36’W x 32’D x 9’H clearance QS-Mezz3632Sunder the deck / 125 PSF / Solid steel deckModel 8 - Mezzanine 48’W x 32’D x 9’H clearance QS-Mezz4832Sunder the deck / 125 PSF / Solid steel deckModel 9 - Mezzanine 12’W x 48’D x 9’H clearance QS-Mezz1248Sunder the deck / 125 PSF / Solid steel deckModel 10 - Mezzanine 24’W x 48’D x 9’H clearance QS-Mezz2448Sunder the deck / 125 PSF / Solid steel deck Model 11 - Mezzanine 36’W x 48’D x 9’H clearance QS-Mezz3648Sunder the deck / 125 PSF / Solid steel deckModel 12 - Mezzanine 48’W x 48’D x 9’H clearance QS-Mezz4848Sunder the deck / 125 PSF / Solid steel deck

Uniformly Distributed Load:

capacity calculated per

square foot

C/C JOISTSPACING

1,000 lbs

MEZZANINES

FINISHPowder-coated Cogan grey

Structure Details

9’ clear height

Standard Models

MEZZANINE FEATURES (APPLIES TO ALL MODELS)9’ clear height (clearance is measured from under beams). Spans are 12’W x 16’L C/C of columns (add 10” for O.D. of baseplates). Load capacity 125 PSF (pounds per square foot) uniformly distributed load. Solid steel deck flooring.

125 PSF (pounds per square foot)Uniformly Distributed Loads (UDL)

HOW TO CALCULATE UDLsSince a loaded pallet has multiple transfer points, it will uniformly distribute its load to the deck. Example:1,000 lbs material on a 3ft x 3ft pallet = 111 PSFLoad is OK2,000 lbs material on a 3ft x 3ft pallet = 225 PSFLoad is NOT OKAY

SPECIFICATIONSPrefabricated system for ease of installation Accelerated approval drawing processIncrease your manufacturing and storage capacity fast – without incurring costly renovations or moving to a new facility – with a structural steel mezzanine. Whether you need a little or a lot more floor space, Cogan QuickShip mezzanines are the perfect solution to fit your needs, your timing and your budget. 2-3 weeks delivery.

3’ 3’

QuickShipAccelerated Delivery

(TRIPLE SPAN)

Weight Sq. Ft.

TRIPLESPAN

Page 11: Ebrochure quickship

3-rail2-rail

Staircases (staircase & landing sold separately)

STAIRCASE FEATURESAll QuickShip staircases meet IBC 2012 safety standards.Staircases have a 31° slopeSteps are 36”WClosed treads are 12”DOpen risers are 7”H

Item Description Item #3-Rail Staircase / straight run closed tread QS-MSB1-9steps: 36”W x 12”D / open risers 7”H3-Rail + Inner Handrail Staircase / straight run QS-MSI1-9closed tread steps: 36”W x 12”D / open risers 7”H3-Rail Staircase Top Landing 4’ x 4’ QS-MP23(attached to mezzanine)

LANDING OPTIONSStaircase landings are required when a staircase runs parallel to the mezzanine.Depending on your space restrictions, you can choose between:1. Straight run without a landing (perpendicular)2. Straight run with a landing (parallel)Important: Landings are sold with 3-rail handrail included. All other handrail is sold separately.

3-rail 3-rail + innerhandrail

Handrail (side mounted / sold separately) Item Description Item #(sold by linear foot)2-Rail Handrail 42”H w/ 4”H kick plate QS-MR2-MR13-Rail Handrail 42”H w/ 4”H kick plate QS-MR3-MR1

Double Swing Gate (sold separately)

Item Description Item #3-Rail Double Swing Gate 6’-0”W QS-MG263

FINISHPowder-coated safety yellow

GATE FEATURESGates are optional. Use gates to create secure loading zones for pallets and other large material. All gates are:Double swing with a 3-rail design / 6’-0” wide

Important Note on Seismic Restrictions(read carefully)

Please note that QuickShip mezzanines are pre-engineered structures and are not valid in all seismic areas. QuickShip seismic requirements are as follows (see below):United StatesCogan QuickShip mezzanines meet therequirements for Seismic Design Cate-gories (SDC) A, B, and C only. QuickShip mezzanines are not designed for Seismic Design Categories D, E, and F.CanadaCogan’s QuickShip mezzanines are designed to meet the NBCC Seismic Re-strictions for: Ie Fa Sa (0.2) < 0.75Since seismic conditions vary from region to region, it is important that you include the zip or postal code of the installation site with your initial quote request. This is the most accurate way to verify if a Quick-Ship mezzanine will meet the seismic requirements in your area.Mezzanines that fall outside of the pre-ap-proved seismic categories shown above must be quoted on an individual basis.De-sign enhancements, such as cross-brac-ing, may be required in order to meet code and to ensure the safety of the structure. Pricing may vary.

FINISHPowder-coated Rails, Kickplate & StepsCogan grey Electro-galvanized

SPECIFICATIONSConsistent operating height of 83.5” / Special 4-point pivot system Easy and fast adjustabilitySafety pivot gates are your safest bet for busy loading zones. Spe-cially designed pivot arms allow the gate to be opened on one side while closed on the other, protecting your employees from dangerous fall accidents. Four point pivot system transfers vertical movement horizontally for easy manipulation in confined spaces. IN STOCK.Item Description Item #5’W x 5’D QS-MG555’W x 6’D QS-MG565’W x 7’D QS-MG575’W x 8’D QS-MG586’W x 5’D QS-MG656’W x 6’D QS-MG666’W x 7’D QS-MG676’W x 8’D QS-MG688’W x 5’D QS-MG85 8’W x 6’D QS-MG868’W x 7’D QS-MG878’W x 8’D QS-MG8810’W x 5’D QS-MG10510’W x 6’D QS-MG10610’W x 7’D QS-MG10710’W x 8’D QS-MG108

FINISHPosts Rails & KickplatePowder-coated Cogan grey Electro-galvanized

83 1

/2”

5’-0”, 6’-0”, 7’-0”, 8’-0”, 9’-0”,10’-0”, 11’-0”, 12’-0” wide

5’-0”, 6’-0”, 7’-0”, 8’-0” deep*drop area dimensions

SAFETY PIVOT GATES

FINISHPowder-coatedsafety yellow

Gate width: 5’

Gate width: 6’-7’

Gate width: 8’-10’

QuickShipIn Stock. Ready to Ship

10

Page 12: Ebrochure quickship

11

DIAMOND GRIP FLOORING

SPECIFICATIONS14GA or 12GA solid steel deck / 2”H profile / 12’L planks / 6”, 9” or 12”WCogan diamond grip flooring is durable and wear-resistant. Anti-skid diamond grip dimples provide additional traction tomaximize safety. See charts below for uniformly distributed load capacities. For point and pallet jack loads, please contact a Cogan engineer.

QuickShipAccelerated Delivery

FINISHPowder-coated Cogan grey

(TRIPLE SPAN)

Item Description Item #14GA Interlocking Plank 12”W x 12’L QS-IP141214GA Interlocking Plank 9”W x 12’L QS-IP14914GA Interlocking Plank 6”W x 12’L QS-IPD14614GA Finish Plank 12”W x 12’L QS-FP141214GA Finish Plank 9”W x 12’L QS-FP14914GA Finish Plank 6”W x 12’L QS-FP14612GA Interlocking Plank 12”W x 12’L QS-IP121212GA Interlocking Plank 9”W x 12’L QS-IP12912GA Interlocking Plank 6”W x 12’L QS-IP12612GA Finish Plank 12”W x 12’L QS-FP121212GA Finish Plank 9”W x 12’L QS-FP12912GA Finish Plank 6”W x 12’L QS-FP126

* For point and pallet jack loads, please contact a Cogan engineer to determine proper diamond grip flooring.

Uniformly Distributed Loads (UDLs)

UNIFORMLY DISTRIBUTED LOADSA loaded pallet will uniformly distribute its load to the deck because of its multiple transfer points.

Example:1,000 lbs material on a 3ft x 3ft pallet = 111 PSF

C/C JOIST SPACING

14G

A - L

BS/F

T

12G

A - L

BS/F

T

2 2

CAPACITIES SHOWN ABOVE ARE FOR PLANKS SUPPORTED IN TRIPLE SPAN.

C/C JOIST SPACING

Uniformly Distributed Load:

capacity calculated per

square foot

C/C JOISTSPACING TRIPLESPAN

1,000 lbs

3’ 3’

Weight Sq. Ft.

Page 13: Ebrochure quickship

Point Loads (PLs)Please contact Cogan if you require a point load design.

Pallet Jack Loads (PJLs)Please contact Cogan if you require a pallet jack load design.

Point Load:

One point load allowed

at every 12” per width

of joist C/C

C/C JOISTSPACING

Point Load Layout Example (Plan View)

1,000 lbscapacity/unit

Point load of 500 lbsunderneath this leg

(unit capacity / 4 x 2)

Point load of 1,000 lbsunderneath this leg

(unit capacity / 4 x 4)

Point load of 250 lbsunderneath this leg(unit capacity / 4)

EACH LEG TRANSFERS 1/4OF THE MAXIMUM UNIT

CAPACITY

CAPACITY SHOWN BELOW IS FOR PLANKS SUPPORTED IN TRIPLE SPAN

PALLET JACK LOAD:ALWAYS KEEP A SAFE

DISTANCE OF 18” FROMANOTHER POINT LOAD.

PALLET JACK LOADSMaximum pallet jack loads are calculated based on the weight of the loaded material only. The weight of the pallet jack is not taken into consideration.

C/C JOISTSPACING

Contact Cogan for floor capacity.

Contact Cogan for floor capacity.

POINT LOADSDue to their small transfer surface, machinery, conveyors or racking sitting on legs will distribute point loads to the deck. To calculate point loads, divide the maximim capacity of the unit by the total number of legs (see example below).

CAPACITY IS BASED ON PLANKSSUPPORTED IN TRIPLE SPAN

Notes (If you require a point load or pallet jack load design, please outline your requirements below.)

12

Page 14: Ebrochure quickship

Standard ColorsStandard colors are applied to all products and are automatically included in the material price on your quote. Unless otherwise specified, all standard colors are powder-coated for a durable, long-lasting and maintenance-free paint finish.

Mezzanines Partititions Lockers Cantilever Racking

Cogan Grey

Safety YellowMidnight Black

Safety Yellow

GuardrailsMachine Guarding

Cogan Wire & Metal Products Ltd.

Phone (800) 567.2642Fax (800) [email protected]