EB07 Manual English Ver1.0

U S E R G U I D E

3 r d I R I V E R S T O R Y

S T O R Y H D

CONTENTS

Getting Started

Components

Locating the Controls

Power Management

Connecting the Product

Using Adobe Digital Editions

0 3

0 4

0 6

0 8

1 1

01

02Using EB07

Home Screen

Viewing Books

Setting

1 3

1 5

1 9

03Other Information

Important Safety Information

Troubleshooting

Copyrights

Certification

Registered Trademark

Exemption

2 1

2 3

2 4

3 5

3 5

3 5

Components

G e t t i n g S t a r t e d

EB07

Quick Start Guide: Explains how to use our device. Product Warranty: Please keep this in a safe place for use during any warranty repairs. USB Cable: Connects device to the computer and recharges the battery.

0 3

Components may be changed without prior notice for improvement of product performance or quality.

Quick Start Guide& Product warranty

USB Cables

G e t t i n g S t a r t e d0 4

1

2

3

4

EPD

SD Card Slot

USB Port

Power

It enables readers to feel as if they were reading a paperback book.

Insert a SD card to view and replay the files on the card.

Connect to computer or recharge the battery using this port.

Turn off the power by pressing and holding. Switch to standby mode by pressing briefly.

3

2

4

1

Locating the ControlsThe exterior and the contents printed or engraved may differ by model or according to the name of each part.


1 3 6542

11 12 13 14 15 16 17

7 8

910

1234567891011121314151617

HOME

BACK

Previous Page

Down

Up

Next page

ENTER

OPTION

DEL

ENTER

Shift

SYM(Symbol Key)

Zoom Out

Rotation

Space

BACK

Move

Move to the home screen.

Move to the previous screen.

Move to the previous page.

Move down in the list.

Move up in the list.

Move to the next page.

Confirm and execute the selected items.

Display Option window.

Delete entered letters and files on the list.

Confirm and execute the selected items.

Enter capital letters or double consonants.

Enter numbers or symbols.

Zoom letters.

Rotate the screen.

Set as Space bar / Favorite.

Move to previous screen.

Move to 4-way direction.


Power Management

1. If you press the [Power] when the product is on, you can switch to

Sleep Mode.

2. If you press the [Power] again, the Sleep Mode is terminated.

Switching to Sleep Mode

1. Slide to the [Power] in the direction of arrow and the power comes on.

2. When the product is on, slide [Power] in the opposite direction of

arrow and the power goes off.

This model supports an automatic power-saving feature to minimize

battery consumption. Depending on [Option - Setting - System - Auto

Power off], the product will be automatically turned off when keys are not

operated for a specified time. (Refer to page 20)

Power on/off


1. Turn on the computer and connect the product with your computer.

The internal battery will charge automatically.

Charging then Battery Using Your Computer

Replay Time

- Continuous Book Replay Time: Max. 14,000 page view

Do not use cables other than the USB cable provided. It may cause malfunction.

Verify that the product is connected to a high-power USB 2.0 port. Some low-power

USB ports built into certain peripheral devices, such as some types of keyboards

and USB hubs without internal power may not provide enough power to charge.

While the PC is switched to Sleep Mode, the product may not be charged.

Charge and store the product only at room temperature.

Do not expose the device to extremes in temperature while recharging.

The rechargeable battery is a consumable and the available usage time of

charged battery becomes shorter over time.

The battery will be fully charged within about 4.5 hours. (Based on fully

discharged, power Off).

Charging times may vary if device is used during recharge.

If the battery is completely discharged and has not been used for a long time,

power will not come on again until it has been charged for at least ten minutes.

1. If the product does not respond to key presses, reset it by pressing

and holding the [Power] for more than 14 seconds.

Using the Reset Function

Even if you use reset function, current time and memory data will be preserved.

To avoid damaging the memory, do not use reset function while the device

is playing.


1. Turn on the device and computer.

2. If you connect the device to your computer, you will see the screen

where you can select connection mode.

- Charge Battery: The product is currently being charged.

- Connect Removable Disk: The connection between the product and the computer is established and you can start transferring data.

Connecting to Your Computer

Connecting the Product

Do not use cables other than the USB cable provided. It may cause malfunction.

For successful computer/USB connection, disable all functions.

Check that the product is connected to a high-power USB 2.0 port. Some low-power

USB ports built into certain peripheral devices, such as some types of keyboards

and USB hubs without internal power may not provide enough power to charge.

1. Safely disconnect the product from your computer by clicking the

icon on the taskbar of the computer screen.

2. Confirm the device disconnection by clicking [Confirm].

Disconnecting the Product


1. After selecting files/folders to copy from your computer, drag and

drop the selected file/folder to the added drive.

2. Files (or folders) will be transferred to folders below according to

their content type.

- E-Book : book - Comic Book : comic

Copying Files (Folders) to the Product

Depending on the operating system for example Windows XP, the icon may be

hidden from the taskbar. Hidden icons can be displayed by clicking indicator.

Safe disconnection may not be performed if application programs such as

Windows Explorer or Windows Media Player are being used.

Make sure that the product is safely disconnected after all the active

application programs are closed. If safe disconnection fails, try again later.

Failure to safely disconnect result in data loss.

Please connect the USB cable properly.

If the power of the computer or product is turned off or the USB cable is disconnected

while copying or moving files/folders, serious damage to the memory may result.

Transfer rate may differ depending on the computer or OS environment

available for your region.


1. Select the files/folders to be deleted, right-click on them and select

[Delete].

2. Click [Yes] when the [Confirm File/Folder Deletion] window pops up,

and the selected files/folders will be deleted.

Deleting Files (Folders) from the Product

1. Open the cover of SD Card slot.

2. Turn the power off, place the SD

card (see the figure below) in the

SD card slot, and press gently.

3. Press it in once more and the

card can be removed.

Inserting/removing the SD card


Brand: SanDisk, Transcend

Recommended SD cards

Insert/remove the SD card while the power is off.

Do not force the SD card. It may cause malfunction and damage to the SD card.

Do not remove the SD card when in use. It may delete data, cause

malfunction, or damage the SD card.

Please do not repeatedly insert/remove the SD card.

If the SD card is not positioned properly, the product may malfunction or

the card may become stuck.

Use only the recommended SD cards. The use of other Micro SD cards

may cause malfunction.

The transfer rate of the SD card may differ according to the computer status.

SD cards cannot be formatted using the product. Please format after

connecting the card reader or the product to the computer through UMS.

When formatting a SD card, all the data are deleted. Make sure that the

data is backed up before formatting.

It is recommended that you format a SD card to FAT 32 system.

If a SD card is not recognized or malfunctions, reformat and retry.

SD cards can be purchased separately.

It is recommended that you use a SD card up to 32GB.

Using Adobe Digital EditionsTransfer copyrighted e-book files onto the portable device easily by

using Adobe Digital Editions.


1. After you execute the Adobe Digital Editions program, please begin

the [Library-Computer Authentication] process.

2. Once you type in your ID and password on the computer's

authentication window, press the authentication button.

You can obtain the Adobe ID from the Adobe website.

3. After authentication is completed, the device installation helper

window will appear if you connect the device to your computer.

4. Press the device authentication button.

Authenticating the Computer and the Product

1. Execute the Adobe Digital Editions program.

2. Please select content to be saved on to the device and drag & drop the file.

Transferring Files to the Device

1. Please download Adobe Digital Editions from the Adobe website. Once you

finish downloading it, you will see the installation guide screen appearing.

2. Please complete the installation process by following the

step-by-step instructions.

Installation

1 3 U s i n g E B 0 7

Home Screen

Home Screen Legend

51

2

4

1

2

3

4

5

Name of player

Books recently read

Type of book

List of books

Batteries

Indicates name of player.

Indicates books you recently read.

Indicates the type of books.

Indicates the list of books.

Indicates the status of batteries.

3

1 4 U s i n g E B 0 7

8

9

10

11

6

7

8

9

10

11

Selected field

Time

SD card

FAVORITE

Format

Pages

Indicates the selected field.

Indicates the current time.

Indicates if SD card is inserted.

Designates the books registered as favorites.

Specifies the file’s format.

Specifies the page number of book you are currently reading and the total number of page.

7

While playing, if you press [HOME], the home screen displays.

6

1 5 U s i n g E B 0 7

1. Once you select [ / ] on the Home screen, you can go to the

tab of type of book.

2. In the type of book, press the [ / ] to select the type of book you

want, and press [ENTER] to display the list of book.

(In case the operation of [Option - Setting – System] is under

[Folder List], display the location of folder not the type of file.)

- Title: Specify titles in order / Recent: Specify the books recently read

FAVORITE: Designates the books registered as favorites.

Author: Specifies authors in order / Image : Indicates comic books

3. Press the [ / ], select the book you want, and press the

[ENTER] to open the book selected.

Selecting Books

Viewing Books

Using the [ / / / ] in the upper of product, you can operate the

same as using [ / / / ].

Supported file format: PDF, EPUB, TXT, DOC, PPT, XLS, HWP, DJVU, FB2

Supported comic book format: JPG, BMP, PNG, GIF, Zip compressed file format

For the files in progressive JPEG format, it will take longer to load the first

time and to do page turning.

- If you press the [ / ] on the file list, you can go to the previous/

next page.

- If you press and hole the [ / ] on the file list, you can continuously

go to the previous/next page.

Viewing Previous/Next List Page

U s i n g E B 0 71 6

1. In the Home screen, press [OPTION].

2. In the Option menu, press [ / ] to select [Search books],

then press [ENTER] to display a text box to enter keywords.

3. Enter a keyword, then press [ENTER] to display a list of books

containing the word.

4. In the book list, press [ / ] to select the book you want,

and press [ENTER] to open the selected book.

Searching Books

1. In the book list, press [ / ] to select the book you want,

and press the [Space] to register the book in the Favorites list.

Registering a Book in the Favorites List

While entering a keyword, press [DEL] to delete one letter at a time.

- While reading, press [ / ] to display the previous/next page.

- While reading, press and hold [ / ] to continuously go to the

previous/next page.

- While reading, press [ ] to rotate the previous page.

- While reading a file in pdf, press [ ] to zoom in the text when the

reflow function is off, and press [ ] to adjust the font size when

the reflow function is on.

Viewing books

U s i n g E B 0 71 7

1. While reading books, press [OPTION] to view the list of menu.

2. In the Option menu, press [ / ], select the additional features

you want, and press [ENTER] to save your settings.

- Move Page: Enables you to go to the page you entered.

- Add/Delete Bookmark: Add or delete the page you are reading to

the bookmark.

- Search Dictionary: Search it in a dictionary by entering a keyword.

+ If you enter a keyword and press [ENTER], the screen displays the

keyword definition page of English - English dictionaries.

Additional Features

+ To zoom in

Zoom in the text by pressing the [ ] and pressing [ I ].

Zoom out the text by pressing [ O ].

When zoom in function is on, go to the page you want by

pressing [ / / / ].

Press [ENTER] to confirm your settings and press [BACK] to

cancel the settings.

If the text is enlarged, press [ W(Scroll up) / A(Scroll Left) /

S(Scroll Down) / D(Scroll Right)] to go to the enlarged page.

+ Size of fonts

You can select the size of font by pressing [ ] and [ / ].

Press [ENTER] to confirm your settings.

- While reading, press [BACK] to display the previous page.

U s i n g E B 0 71 8

1. While reading comic books, press [OPTION].

2. In the list of option, press [ / ] to select the option you want,

and set the item to press [ENTER].

- Move Page: Enables you to go to the page you entered.

- Add/Delete Bookmark: Add or delete the page you are reading in a

bookmark.

Additional Features

+ In the keyword definition page, press [ / ] to display the

previous / next definition page.


previous / next headword definition page.

- Bookmark And Word List: Display the list of Bookmark/Words.

- Table of Contents: If there is a table of contents in the file, you can

view it with this function.

+ If you select a table of contents, you can move to the page that

you select. (This function supports PDF/EPUB files only)

- Dithering On/Off: If the color scheme used in the original file is impossible

to reproduce, it will be replaced by one most similar to the original.

- Reflow On/Off: If the page is too crowded with text, which may make

it hard for you to read, this function will simplify the page and thereby

improve readability.

- Bold On/Off: Display screen in bold.

Depending on file format, you may not be able to see the menu.

U s i n g E B 0 71 9

Setup Set up the desired user environment. The pre-installed menu structure

may differ depending on the firmware version.

- Search Dictionary: Search keywords by entering it in the dictionary.

+ If you enter a keyword and press [ENTER], the screen displays

the keyword definition page of English - English dictionaries.


previous / next definition page.


previous / next headword definition page.

- Bookmark And Word List: Display the list of Bookmark/Words.

- Right to Left / Left to Right: Change the view type of the comic you

are reading from the right to the left, and vice versa.

- Dithering On/Off: If the color scheme used in the original file is impossible

to reproduce, it will be replaced by one most similar to the original.

- Bold On/Off: Display the screen in bold.

- Set to Sleep Mode Screen: Set the page you are reading to sleep

mode screen.

1. Select [OPTION] on the Home screen.

Settings

U s i n g E B 0 72 0

2. In the Option menu, press [ / ] to select the option you want,

and press [ENTER] to set the item.

- Search: Enter keywords to search a book containing the word

in the list of book.

- Search Dictionary: Enter a search then press [ENTER] to display a

list of books containing the word.

- Setting

Usage

+ Sleep Mode Screen: Sets the sleep mode screen.

iriver: Sets as the image file which iriver provides.

Personal: Sets as the image file which user saved last.

+ Scroll: Sets to go to the previous/next page if you press [ / ]

while viewing books.

System

+ Auto Power Off: Sets to automatically turn off after a specified time elapses.

+ Auto Sleep: Sets to switch into Sleep Mode after a specified time elapses.

+ Time Set: Sets the current time, date, GMT, etc.

+ Operating: Sets how to display the list of books.

+ Language: Sets the language to use.

+ Factory Reset: Restore to the status at the time of purchase.

+ System Information: Display the device system information.

Personal Information

+ Device Name: Sets the name to be displayed in the main screen.

+ User Information: Sets user name and telephone number.

2 1 O t h e r I n f o r m a t i o n

- If the same screen is turned on for a long time, there may be an after-image on the screen.- Do not allow metal (coins, hairpins, etc.) or foreign substances that burn easily to get inside the product. It may cause failure. - Do not place heavy objects on top of the product. It may cause damage or failure.- If the product gets wet from rain, drinks, medicines, cosmetics, sweat, or moisture, do not turn the power on, and after quickly wiping the product with a dry cloth, go to the closest iriver service center and get it checked. (Failure due to submersion will be charged regardless of the warranty period, and repair may be impossible.) It may cause damage or failure.- Do not keep in places where there is moisture, dust, or soot. It may cause failure.- Do not disassemble, repair, or modify. It may cause damage or failure.- Do not keep in direct sunlight or places where the temperature is too high or too low (0°C ~ 40°C). It may cause failure.- Do not keep next to magnets, TVs, monitors, speakers, or other objects with strong magnetism. It may cause failure.- Do not use chemicals or cleaners on the product; they may degrade the surface and cause damage to the finish. It may cause failure.

Relating to the Product

Important safety information


- Do not drop the product, or subject it to strong impact or vibration.

It may cause damage or failure.

- Do not press multiple keys simultaneously. It may cause damage or

failure.

- Do not disconnect from your computer when transmitting data.

It may cause failure.

- When connecting the product with a computer, use a USB port on

the back of the computer.

Some generic computers with sub-standard USB ports can cause

damage to the product.

- Do not insert devices other than earphones in the earphone terminals.

It may cause damage or failure.

- Back up important data on the device and keep it in a safe place.

- The EPD is highly susceptible to shock and pressure.

Please use extreme caution when handling the device.

- Do not use or handle headphones/earphones when driving a bicycle,

car, or motorcycle.

It is not only dangerous but can also be illegal according to the region.

- Do not use when driving, walking, or climbing. There is danger of injury.

- Accidents can happen, so use only in safe place. There is danger of injury.

- When using while on the move, check if there are any dangerous

obstacles. There is danger of injury.

- There is a risk of electric shock during electrical storms. Avoid.

use if possible. There is danger of injury.

Others


+ The power does not come on. - Check available power in the battery. Charge and turn the power on. - Reset the device by pressing the [Power] keys for more than 14 seconds.+ There is an error on the computer when charging battery. - Check if the product is properly connected to the computer.+ There is an error on the computer when connecting the USB. - Check if the product is properly connected to the computer.+ The capacity changes after formatting. - There can be slight changes in capacity according to the OS of the computer you are using.+ The screen is not normal. - Check for foreign substances on the screen.+ The device is not connected to my computer. - Please connect the device to the USB port located on the backside of the computer. Sometimes, power voltage of USB ports may be different.+ I cannot open book files. - Please check if the device supports the file format. + The screen responds too slowly and it takes too much time for the after-image to disappear. - The EPD by its nature is slower than any other comparable devices; especially when it changes menu screens, it flickers and takes more time than usual. - The EPD by its nature may leave after-images on the screen. - If the EPD is exposed to low or high temperature, the device may leave more after-images and respond even slower (range of temperature for normal EPD operation: 0°C-40°C). - If the EPD is exposed to direct sunlight, the screen may leave horizontal lines. (The screen will go back to normal if you go to shaded area.)

Check!

Troubleshooting


iriver Ltd. owns the patent rights, trademark, copyright, and other intellectual

property relating to this manual. Thus, none of the contents of this manual can

be copied or reproduced in any form or by any method without the consent of

iriver Ltd. Using any part or all of the document may result in legal sanctions.

Software, sound sources, videos, and other content with copyrights are

protected under the related provisions of copyright regulations, etc. The user

will be held legally responsible for any copying or distributing of contents with

copyrights without permission, using this product.

None of the companies, organizations, products, people, or events cited in the

examples is real.

Our company has no intention to imply a relationship with any company, organization,

product, person or event through this manual, and none should be inferred.

It is the user’s responsibility to observe the relevant copyright regulations.

©1999~2011 iriver Limited. All rights reserved.

This program is free software: you can redistribute it and/or modify it under the

terms of the GNU General Public License as published by the Free Software

Foundation, either version 2 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY

WARRANTY; without even the implied warranty of MERCHANTABILITY or

FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public

License for more details. You should have received a copy of the GNU General

Public License along with this program. If not, see <

http://www.gnu.org/licenses/ > The source codes are available on the web site.

Access the following web site to download,

www.iriver.com/opensource.html In addition a request for a copy of the source

code on CD ROM /SD card may be requested at [email protected]. You

will be charged a service fee for this offer.

Copyrights

O t h e r I n f o r m a t i o n2 5

GNU GENERAL PUBLIC LICENSE Version 2, June 1991

Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.

Preamble

The licenses for most software are designed to take away yourfreedom to share and change it. By contrast, the GNU General PublicLicense is intended to guarantee your freedom to share and change freesoftware--to make sure the software is free for all its users. ThisGeneral Public License applies to most of the Free SoftwareFoundation's software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered bythe GNU Lesser General Public License instead.) You can apply it toyour programs, too.

When we speak of free software, we are referring to freedom, notprice. Our General Public Licenses are designed to make sure that youhave the freedom to distribute copies of free software (and charge forthis service if you wish), that you receive source code or can get itif you want it, that you can change the software or use pieces of itin new free programs; and that you know you can do these things.

To protect your rights, we need to make restrictions that forbidanyone to deny you these rights or to ask you to surrender the rights.These restrictions translate to certain responsibilities for you if youdistribute copies of the software, or if you modify it.

For example, if you distribute copies of such a program, whethergratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code.


And you must show them these terms so they know their rights.

We protect your rights with two steps: (1) copyright the software, and(2) offer you this license which gives you legal permission to copy,distribute and/or modify the software.

Also, for each author's protection and ours, we want to make certainthat everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations.

Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all.

The precise terms and conditions for copying, distribution and modification follow.

GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICA-TION

0. This License applies to any program or other work which containsa notice placed by the copyright holder saying it may be distributedunder the terms of this General Public License. The "Program", below,refers to any such program or work, and a "work based on the Program"means either the Program or any derivative work under copyright law:that is to say, a work containing the Program or a portion of it,either verbatim or with modifications and/or translated into anotherlanguage. (Hereinafter, translation is included without limitation inthe term "modification".) Each licensee is addressed as "you".


Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program).Whether that is true depends on what the Program does.

1. You may copy and distribute verbatim copies of the Program'ssource code as you receive it, in any medium, provided that youconspicuously and appropriately publish on each copy an appropriatecopyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program.

You may charge a fee for the physical act of transferring a copy, andyou may at your option offer warranty protection in exchange for a fee.

2. You may modify your copy or copies of the Program or any portionof it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:

a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change.

b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License.

c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a


notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.)

These requirements apply to the modified work as a whole. Ifidentifiable sections of that work are not derived from the Program,and can be reasonably considered independent and separate works inthemselves, then this License, and its terms, do not apply to thosesections when you distribute them as separate works. But when youdistribute the same sections as part of a whole which is a work basedon the Program, the distribution of the whole must be on the terms ofthis License, whose permissions for other licensees extend to theentire whole, and thus to each and every part regardless of who wrote it.

Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program.

In addition, mere aggregation of another work not based on the Programwith the Program (or with a work based on the Program) on a volume ofa storage or distribution medium does not bring the other work underthe scope of this License.

3. You may copy and distribute the Program (or a work based on it,under Section 2) in object code or executable form under the terms ofSections 1 and 2 above provided that you also do one of the following:

a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,


b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,

c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.)

The source code for a work means the preferred form of the work formaking modifications to it. For an executable work, complete sourcecode means all the source code for all modules it contains, plus anyassociated interface definition files, plus the scripts used tocontrol compilation and installation of the executable. However, as aspecial exception, the source code distributed need not includeanything that is normally distributed (in either source or binaryform) with the major components (compiler, kernel, and so on) of theoperating system on which the executable runs, unless that componentitself accompanies the executable.

If distribution of executable or object code is made by offeringaccess to copy from a designated place, then offering equivalentaccess to copy the source code from the same place counts asdistribution of the source code, even though third parties are notcompelled to copy the source along with the object code.

4. You may not copy, modify, sublicense, or distribute the Programexcept as expressly provided under this License. Any attemptotherwise to copy, modify, sublicense or distribute the Program isvoid, and will automatically terminate your rights under this License.However, parties who have received copies, or rights, from you under


this License will not have their licenses terminated so long as suchparties remain in full compliance.

5. You are not required to accept this License, since you have notsigned it. However, nothing else grants you permission to modify ordistribute the Program or its derivative works. These actions areprohibited by law if you do not accept this License. Therefore, bymodifying or distributing the Program (or any work based on theProgram), you indicate your acceptance of this License to do so, andall its terms and conditions for copying, distributing or modifyingthe Program or works based on it.

6. Each time you redistribute the Program (or any work based on theProgram), the recipient automatically receives a license from theoriginal licensor to copy, distribute or modify the Program subject tothese terms and conditions. You may not impose any furtherrestrictions on the recipients' exercise of the rights granted herein.You are not responsible for enforcing compliance by third parties tothis License.

7. If, as a consequence of a court judgment or allegation of patentinfringement or for any other reason (not limited to patent issues),conditions are imposed on you (whether by court order, agreement orotherwise) that contradict the conditions of this License, they do notexcuse you from the conditions of this License. If you cannotdistribute so as to satisfy simultaneously your obligations under thisLicense and any other pertinent obligations, then as a consequence youmay not distribute the Program at all. For example, if a patentlicense would not permit royalty-free redistribution of the Program byall those who receive copies directly or indirectly through you, thenthe only way you could satisfy both it and this License would be torefrain entirely from distribution of the Program.

If any portion of this section is held invalid or unenforceable underany particular circumstance, the balance of the section is intended to


apply and the section as a whole is intended to apply in othercircumstances.

It is not the purpose of this section to induce you to infringe anypatents or other property right claims or to contest validity of anysuch claims; this section has the sole purpose of protecting theintegrity of the free software distribution system, which isimplemented by public license practices. Many people have madegenerous contributions to the wide range of software distributedthrough that system in reliance on consistent application of thatsystem; it is up to the author/donor to decide if he or she is willingto distribute software through any other system and a licensee cannotimpose that choice.

This section is intended to make thoroughly clear what is believed tobe a consequence of the rest of this License.

8. If the distribution and/or use of the Program is restricted incertain countries either by patents or by copyrighted interfaces, theoriginal copyright holder who places the Program under this Licensemay add an explicit geographical distribution limitation excludingthose countries, so that distribution is permitted only in or amongcountries not thus excluded. In such case, this License incorporatesthe limitation as if written in the body of this License.

9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns.

Each version is given a distinguishing version number. If the Programspecifies a version number of this License which applies to it and "anylater version", you have the option of following the terms and conditionseither of that version or of any later version published by the FreeSoftware Foundation. If the Program does not specify a version number


of this License, you may choose any version ever published by the Free Software Foundation.

10. If you wish to incorporate parts of the Program into other freeprograms whose distribution conditions are different, write to the authorto ask for permission. For software which is copyrighted by the FreeSoftware Foundation, write to the Free Software Foundation; we sometimesmake exceptions for this. Our decision will be guided by the two goalsof preserving the free status of all derivatives of our free software andof promoting the sharing and reuse of software generally.

NO WARRANTY

11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.

12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA


BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

END OF TERMS AND CONDITIONS

How to Apply These Terms to Your New Programs

If you develop a new program, and you want it to be of the greatestpossible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms.

To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found.

<one line to give the program's name and a brief idea of what it does.> Copyright (C) <year> <name of author>

This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.


Also add information on how to contact you by electronic and paper mail.

If the program is interactive, make it output a short notice like thiswhen it starts in an interactive mode:

Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. This is free software, and you are welcome to redistribute it under certain conditions; type `show c' for details.

The hypothetical commands `show w' and `show c' should show the appropriate parts of the General Public License. Of course, the commands you use may be called something other than `show w' and `show c'; they could even be mouse-clicks or menu items--whatever suits your program.

You should also get your employer (if you work as a programmer) or yourschool, if any, to sign a "copyright disclaimer" for the program, if necessary. Here is a sample; alter the names:

Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision' (which makes passes at compilers) written by James Hacker.

<signature of Ty Coon>, 1 April 1989 Ty Coon, President of Vice

This General Public License does not permit incorporating your program intoproprietary programs. If your program is a subroutine library, you mayconsider it more useful to permit linking proprietary applications with thelibrary. If this is what you want to do, use the GNU Lesser GeneralPublic License instead of this License.


KC / FCC / CE / PCT / CCC

Grade B device (home broadcasting and communication device) is

mainly for domestic use (grade B). It is EMC certified, and can be

used in all areas.

Certification

Registered Trademark

Exemption

The manufacturer, importer, and agencies will not be held liable for

damage caused by accidents including injuries or inappropriate use

or handling of the product. The information in the manual is based on

the current specifications of the product.

Windows 2000, Windows XP, Windows Vista, Windows 7, Windows

Media Player are trademarks of Microsoft corp.

iriver E-book contains Adobe® Reader® Mobile software under

license from Adobe Systems Incorporated, Copyright © 1995-2011

Adobe Systems Incorporated. All rights reserved.

Adobe and Reader are trademarks of Adobe Systems Incorporated.


iriver Ltd., the manufacturer of this product, continues to add new

features and apply new technologies to it. All standards may be

changed without prior notice to individual users.

We cannot be held responsible for data loss caused by the use of the

product.

The technical limits in the manufacturing process may cause EPD Panel to

have approx. 0.0012% bright or dark pixels.

However, it does not affect the capability of the product.

EB07 Manual English Ver1.0

Documents

Transcript of EB07 Manual English Ver1.0