Eaton VIS Motor

Series VIS 30 andVIS 45 Hydraulic MotorsSeries VIS 30 andVIS 45 Hydraulic Motors

No. 11-112August, 1998Eaton®

VIS (Valve-In-Star) Hydraulic Motors

2

Serving Customers Worldwide

HeadquartersEden Prairie, Minnesota

U.S. Manufacturing PlantsEden Prairie, MinnesotaSpencer, IowaShawnee, OklahomaHutchinson, Kansas

Manufacturing Plant, SalesOffice & Service CenterGlenrothes, Scotland

Sales OfficeRatingen, Germany

Joint VenturesSehyco — Kameoka, JapanJehyco — Jining, China

Global Distribution101 Distributors in 897 Locations51 Countries, 6 Continents

Hydraulics Division Headquarters, Eden Prairie, Minnesota

The Hydraulics Division of Eaton Corporation......is your one-stop source for all your hydraulic design andapplication needs. From world-class engineering capabilitiesin system design assistance to comprehensive service andtechnical support after the sale, we are committed to oneclear objective — to help assure your complete satisfactionwith our products.

The Hydraulics Division manufactures and globally markets acomplete line of reliable, high-efficiency hydraulic componentsand systems, including:

• Hydrostatic Transmissions• Electronic Controls and Systems• Axial Piston Pumps and Axial Motors• Radial Ball Piston Pumps• Fully Fluid-Linked Hydrostatic Power Steering• Char-Lynn® Gerotor and Geroler® Low Speed/

High Torque Motors• Valves, Cylinders, Gear Pumps, and Gear Motors.

Backed by the most extensive distributor network in the fluidpower industry, the Eaton Hydraulics Division has the resourcesto meet your needs. The Division has four manufacturing plantsin the U.S., and one in Scotland. Joint ventures in Japan andChina complete the global manufacturing network. All told, theDivision currently employs more than 2,000 people with nearly1,000,000 square feet of manufacturing space, all dedicated toquality, performance and timely response to your design andapplication needs.

Major Markets Served• Agriculture • Lawn and Garden • Industrial• Construction • Mining • Lumber• Fishing • Marine • Food Processing

Eaton CorporationFounded in 1911 to manufacture truck axles, Eaton nowproduces more than 40,000 different products, made in 24countries on five continents. To serve your current andemerging business needs, Eaton Corporation has over 52,000employees in 150 manufacturing sites worldwide.

Today, Eaton Corporation is one of the world’s premierproducers of electronic and electrical controls and vehiclecomponents. With sales approaching $7 billion annually, Eatonis ranked among the top 100 industrial companies in the UnitedStates, as well as one of the top 150 worldwide.

http://www.eaton.com

3

Standard MotorThe standard motor mounting flange is located as close to the outputshaft as possible. This type of mounting supports the motor close tothe shaft load. This mounting flange is also compatible with manystandard gear boxes.

Design FeaturesChar-Lynn hydraulic motors provide design flexibility. All VISmotors are available with various configurations consisting of:• Displacement (Geroler size)• Output Shaft• No Shaft and Bearing Assembly (Bearingless Motor)• Port Configuration• Mounting Flange• Other Special Features

Bearingless MotorThis bearingless motor has the same drive components as thestandard and wheel motors (with the exception that the motor isassembled without the output shaft, bearings and bearing housing).The bearingless motor is especially suited for applications such asgear boxes, winch drives, reel and roll drives. Bearingless motorapplications must be designed with a bearing supported internal splineto mate with the bearingless motor drive. Product designs using thesehydraulic motors provide considerable cost savings.

Wheel MotorThe wheel motor mounting flange is located near the center of themotor which permits part or all of the motor to be located inside thewheel or roller hub. In traction drive applications, loads can bepositioned over the motor bearings for best bearing life. This wheelmotor mounting flange provides design flexibility in many applications.

Applications• Skid Steer Loaders

• Mini Excavators

• Trenchers

• Augers

• Logging Equipment

• Ag Combines

• Road Rollers

Key Features• Very Compact Package

• Higher Output Torque

• Improved Efficiency

• Durable Design and Construction

• Quiet and Smooth Operation

• Shuttle Valve for Reliable Drive Lubrication

• Rating Compatible with Medium Duty Pumps

• Patented Technology

Optional Features• SAE or BSP Ports Sizes

• VIS 30 — SAE and ISO Style Mountings

• Many Output Shaft Configurations

• Back Pressure Relief Valves

Get the VISible PerformanceAdvantage for Your Application

Product DescriptionThe VIS ( Valve-in-Star ) Motors are the next step in theevolution of the LSHT ( Low Speed High Torque ) hydraulicmotors. The VIS design provides inherent improvements overother types of LSHT hydraulic motor valving which results in amore compact package with better efficiency and higherpressure capability. These improvements have shown signifi-cant packaging and performance advantages in applicationssuch as skid steer loaders, mini excavators, trenchers andlogging equipment.VIS motors are primarily intended for use in closed loop circuitapplications. Consult your Eaton representative for assistanceon open loop circuit applications.

4

VIS Hydraulic Motors

Contents

General InformationDescription, Features, Options, and Applications ..... Page 3Product Overview Series VIS 30 ........................................ 5Product Overview Series VIS 45 ........................................ 6Hydraulic Circuit Explanation ............................................. 7

Product Information — Series VIS 30Specifications .................................................................... 8Performance Data ......................................................... 9-11Dimensions — Standard and Wheel Mount (SAE) .......... 12Dimensions — Standard and Wheel Mount (ISO) ........... 13Dimensions — Bearingless ............................................. 14Dimensions — Shafts, Standard and Wheel (SAE) ......... 15Dimensions — Shafts, Standard and Wheel (ISO) .......... 16Shaft Side Load — Standard and Wheel (SAE) ............... 17Shaft Side Load — Standard and Wheel (ISO) ................ 18Product Numbers ............................................................ 19Model Code ..................................................................... 20Installation Information — Bearingless Motor ................ 35

Product Information — Series VIS 45Specifications .................................................................. 21Performance Data .......................................................22-25Dimensions — Standard Mount ...................................... 26Dimensions — Wheel Mount .......................................... 27Dimensions — Bearingless ............................................. 28Dimensions — Shafts, Standard and Wheel ..............29-30Dimensions — Ports, Std, Whl and Brgl ......................... 31Shaft Side Load — Standard and Wheel ......................... 32Product Numbers ............................................................ 33Model Code ..................................................................... 34Installation Information — Bearingless Motor ................ 36

Information contained in this catalog is accurate as of the publication date and is subject to change without notice. Performance values are typical values. Customers are responsible for selecting products for their applications using normal engineering methods.

LSHT Hydraulic MotorsVIS 30 and VIS 45 VIS 30 and VIS 45

5


Series VIS 30

VIS 30VIS 30

Port Type

Mounting Flange

• 4 Bolt (Standard – SAE) 127,00 [5.000] Pilot Dia. and 14,35 [.562] Dia. Mounting Holes on 161,92 [6.375] Dia. B.C. • 4 Bolt (Standard – ISO) 125,00 [4.920] Pilot Dia. and 14,00 [.551] Dia. Mounting Holes on 160,00 [6.299] Dia. B.C. • 4 Bolt (Wheel – SAE) 139,65 [5.500] Pilot Dia. and 14,35 [.562] Dia. Mounting Holes on 184,15 [7.250] Dia. B.C. • 4 Bolt (Wheel – ISO) 160,00 [6.300] Pilot Dia. and 18,00 [.710] Dia. Mounting Holes on 200,00 [7.874] Dia. B.C.

• G 3/4 (BSP) Straight Thread with G 1/4 (BSP)Straight Thread Case Drain Port

Geroler® Element 5 DisplacementsFlow l/min [GPM] 114 [30] Continuous***

132 [35] Intermittent**Speed Up to 539 RPMPressure bar [PSI] 207 [3000] Cont.***

345 [5000] Inter.**380 [5500] Peak.*

Torque Nm [lb-in] 1520 [13457] Cont.***1910 [16904] Inter.**2101 [18595] Peak.*

........

.....

...........................

....

*** Continuous— (Cont.) Continuous rating, motor may be run continuously at these ratings.

** Intermittent— (Inter.) Intermittent operation, 10% of every minute.

* Peak— (Peak) Peak operation, 1% of every minute.

Series VIS 30

• 40mm Dia. Straight (ISO) with Straight Key, M12 x 1,75 Threaded hole and 76,4 [3.01] Max. Coupling Engagement• 40mm Dia. Straight (SAE) with Straight Key, M12 x 1,75 Threaded hole and 74,7 [2.94] Max. Coupling Engagement

• 1–3/4 inch Dia. Tapered with Straight and 1–1/4-18 UNEF Slotted Hex Nut• 45mm Dia. Tapered with Straight and M30 x 2-6H Slotted Hex Nut• 1–1/2 inch Dia. Splined 17T with 56,6 [2.23] Full Spline Length and M12 x 1.75 Threaded Hole

• 1 - 1/16–12 UN-2B SAE O-ring Port with 9/16–18 UNF 2B SAE O-ring Case Drain Port

• 246 [15.0]• 323 [19.7]

• 492 [30.0]• 623 [38.0]

• 4 Bolt (Bearingless) 127,00 [5.000] Pilot Dia. and 14,35 [.562] Dia. Mounting Holes 161,92 [6.375] Dia. B.C.

Output Shaft• Bearingless

= cubic inch per shaft revolution ( [ in3/r ] )Series VIS 30 Displacement Size = cubic centimeter per shaft revolution ( cm3/r )

• 397 [24.2]

6


Series VIS 45

Geroler® Element 7 DisplacementsFlow l/min [GPM] 170 [45] Continuous***

189 [50] Intermittent**Speed Up to 364 RPMPressure bar [PSI] 207 [3000] Cont.***

345 [5000] Inter.**380 [5500] Peak*

Torque Nm [lb-in] 3801 [33642] Cont.***5142 [45512] Inter.**5656 [50063] Peak*

........

.....

...........................

....

Series VIS 45

VIS 45VIS 45

*** Continuous— (Cont.) Continuous rating, motor may be run continuously at these ratings.

** Intermittent— (Inter.) Intermittent operation, 10% of every minute.

* Peak— (Peak) Peak operation, 1% of every minute.

= cubic inch per shaft revolution ( [ in3/r ] )

Port Type

Output Shaft

Mounting Flange

• 4 Bolt (Std.) 200,0 [7.87] Pilot Dia. and 20,6 [.81] Dia. Mtg. Holes on 250,0 [9.84] Dia. B.C. • 4 Bolt (Whl.) 200,0 [7.87] Pilot Dia. and 20,6 [.81] Dia. Mtg. Holes on 250,0 [9.84] Dia. B.C.

• 1557 [95.0]

• G 1 (BSP) Straight Thread Port with G 1/4 (BSP) Straight Thread Case Drain Port

45 Series Displacement Size = cubic centimeter per shaft revolution ( cm3/r )

• 60mm Dia. Tapered (10:1 Taper per ISO R775) with Straight Key and M42 x 3 -6H Slotted Hex Nut

• 2–3/4 inch Dia. Splined 32T with 52,07 [2.050] Min. Full Spline Length and 1/2-13 UNC - 2B Threaded Hole

• 1-5/16–12 UN SAE O-ring Port with 9/16-18 UNC SAE O-ring Case Drain Port

• 572 [34.9]• 636 [38.8]• 803 [49.0]

• 1245 [76.0]• 991 [60.5]

• Bearingless

• 4 Bolt (Brgl.) 158,70 [6.250] Pilot Dia. and 17,53 [.690 ] Dia. Mounting Holes on 190,50 [7.500] Dia. B.C. • 8 Bolt (Brgl.) 158,70 [6.250] Pilot Dia. and 15,88 [.625] Dia. Mounting Holes on 190,50 [7.500] Dia. B.C.

• 520 [31.7]

• 2–5/8 inch Dia. Straight with Straight Key, 5/8-18 UNF - 2B Threaded Hole

• 70mm Dia. Splined 22T with 45,7 [1.80] Min. Full Spline Length and M16 x 1,5 Threaded Hole

7


Typical Hydraulic CircuitSeries VIS 30 and VIS 45

T ShuttleValve

LowPressure

HighPressure

To MotorCase Case

DrainPort

Closed LoopCharge ReliefValve

B

D

A

B

A

S

Pump, Variable VIS Motor

Low PressureRelief Valve

Shuttle Valve

P1 P2

CaseDrainPort

Case Drain

ShuttleValve

Closed LoopCharge ReliefValve

Note: VIS motors are primarily intended for use in closed loop circuit applications.VIS motors applied in open loop circuit require 6,9 bar [100 PSI] minimum back pressureto properly lubricate the drive — consult your Eaton representative.

8


SpecificationsSeries VIS 30

Continuous

Intermittent

Max. Speed (RPM) @...................... Flow

Specification Data — Series VIS 30

Flowl/min [GPM]

Displ. cm3/r[in3/r]

TorqueNm[lb-in]

Continuous

Intermittent

Continuous

Intermittent

246[15.0]

114 [30]

132 [35]

462

539

720 [ 6374]

1159 [10266]

323[19.7]

114 [30]

132 [35]

352

410

946 [ 8372]

1523 [13482]

492[30.0]

114 [30]

132 [35]

231

270

1440 [12749]

1856 [16425]

397[24.2]

114 [30]

132 [35]

288

335

1157 [10241]

1770 [15669]

623[38.0]

114 [30]

132 [35]

182

213

1520 [13457]

1910 [16904]

Continuous

Intermittent

Recommended Filtration — per ISO Cleanliness Code, level 18/13

Shuttle — Standard

Low Pressure Relief Valve — Required for closed loop circuit.

Pressure∆ bar[∆ PSI]

To assure best motor life, run motor for approximately one hour at 30% ofrated pressure before application to full load. Be sure motor is filled withfluid prior to any load applications.

Recommended Maximum System Operating Temp. — Is 82° C [180° F]

Recommended Fluids — Premium quality, anti-wear type hydraulic oil with a viscosity of not less than70 SUS at operating temperature.

∆ Bar [∆ PSI] — True pressure difference between inlet port and outlet port.

Continuous Rating — Motor may be run continuously at these ratings.

Intermittent Operation — 10% of every minute.

A simultaneous maximum torque and maximum speed NOT recommended.

Maximum Inlet Pressure — 400 bar [5800 PSI]. Do not exceed ∆ pressure rating (see chart above).

Return Pressure — 6,9 - 21 bar [100 - 300 PSI]. Do not exceed ∆ pressure rating (see chart above). Case drain required.

Note: Optional version can be used without case drain.

Peak

207 [3000]

345 [5000]

380 [5500]

207 [3000]

345 [5000]

380 [5500]

207 [3000]

276 [4000]

310 [4500]

207 [3000]

327 [4750]

362 [5250]

172 [2500]

224 [3250]

Peak 1275 [11293] 1676 [14830] 2041 [18068]1947 [17236] 2100 [18595]

259 [3750]

Peak Operation — 1% of every minute.

End Cap

Valve Plate

Balance Plate

Face Seal Case Drain Port MountingFlange

Geroler® Drive BearingsOutputShaft

FrontRetainer

Shuttle Valve Relief Valve

ShaftSeal

9


Performance DataSeries VIS 30

VIS 30 - 245 cm3/r [15.0 in3/r] ∆ Pressure VIS 30 - 320 cm3/r [19.7 in3/r] ∆ Pressure

PSI PSIbar bar

250 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 250 500 1000 1500 2000 2500 3000 3500 4000 4500 500015 35 70 105 140 170 205 240 275 310 345 15 35 70 105 140 170 205 240 275 310 345

4 485 970 2035 3025 4075 4960 5980 7000 8020 8890 9820 4 530 1290 2670 4030 5350 6630 8040 9340 11000 12970 1320055 110 230 342 460 560 676 791 906 1005 1110 60 146 302 455 605 749 909 1055 1243 1466 1492

15 61 61 59 58 56 56 55 54 51 48 46 15 47 47 45 44 43 43 42 41 39 37 358 510 1000 2085 3090 4180 5120 6280 7010 8135 9020 9985 8 580 1300 2700 4040 5440 6790 8140 9360 11090 13150 13260

58 113 236 349 472 579 710 792 919 1019 1128 66 147 305 457 615 767 920 1058 1253 1486 1498Flow 30 123 121 118 115 112 110 109 108 102 96 92 Flow 30 93 92 90 88 85 84 83 82 78 73 70GPM 12 485 1060 2045 3085 4210 5130 6350 7070 8240 9025 10075 GPM 12 630 1390 2720 4065 5375 6750 7920 9135 10380 11520 12650l/min 55 120 231 349 476 580 718 799 931 1020 1138 l/min 71 157 307 459 607 763 895 1032 1173 1302 1429

45 184 178 176 173 169 169 168 165 164 164 161 45 140 136 134 132 129 129 128 126 125 125 12316 420 1080 2040 3075 4125 5115 6415 7105 8260 9100 10160 16 785 1485 2650 3995 5340 6710 8090 9190 10425 11925 12435

47 122 231 347 466 578 725 803 933 1028 1148 89 168 299 451 603 758 914 1038 1178 1348 140561 246 241 238 234 227 223 219 219 218 211 210 61 187 184 181 178 173 170 167 167 166 161 16020 360 1020 2035 3055 4120 5090 6300 7000 8360 9060 20 800 1425 2620 3960 5280 6695 8080 9180 10400 11880

41 115 230 345 466 575 712 791 945 1024 90 161 296 447 597 757 913 1037 1175 134276 308 302 297 291 284 280 275 274 273 265 76 234 230 226 222 216 213 209 209 208 20225 240 970 2015 3020 4020 5050 6085 6970 8100 25 735 1400 2550 3875 5150 6625 7800 9155 10380

27 110 228 341 454 571 688 788 915 83 158 288 438 582 749 881 1035 117395 385 377 372 368 364 353 347 344 343 95 293 287 283 280 277 269 264 262 26030 895 1995 3025 3965 5045 6010 6890 7895 30 1380 2500 3820 5140 6535 7990 9140 10365

101 225 342 448 570 679 779 892 156 283 432 581 738 903 1033 1171114 453 446 441 437 424 416 412 411 114 345 340 336 333 323 317 314 31335 870 1920 3015 3920 4975 5945 6870 35 1360 2490 3810 5115 6500 7960 9130

98 217 341 443 562 672 776 154 281 431 578 735 899 1032133 528 520 516 509 495 484 482 133 402 396 393 388 377 369 367

6870 Torque [lb-in] 9130 Torque [lb-in]776 Torque (Nm) 1032 Torque (Nm)482 Speed (RPM) 367 Speed (RPM)

Motors run with high efficiency in allareas designated with a number for torqueand speed, however for best motor lifeselect a motor to run with a torque andspeed range printed in the white background area.

Continuous Intermittent

Performance data is typical at 120 SUS. Actual datamay vary slightly from unit to unit in production

10







PSI PSIbar bar

250 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 250 500 1000 1500 2000 2500 3000 3500 4000 450015 35 70 105 140 170 205 240 275 310 345 15 35 70 105 140 170 205 240 275 310

4 720 1580 3255 4860 6520 7965 9700 11090 12695 14225 15480 4 970 1960 4040 6045 8075 9855 11780 13365 15820 1764081 179 368 549 737 900 1096 1253 1435 1607 1749 110 221 457 683 912 1114 1331 1510 1788 1993

15 38 38 37 36 35 35 34 34 32 30 29 15 30 30 29 29 28 28 27 27 25 248 770 1620 3330 4920 6680 8130 10050 11270 12920 14300 15650 8 1025 2060 4250 6335 8527 10520 12750 14030 16080

87 183 376 556 755 919 1136 1274 1460 1616 1768 116 233 480 716 964 1189 1441 1585 1817Flow 30 76 75 74 72 70 69 68 67 64 60 57 Flow 30 61 60 59 57 56 56 55 54 54GPM 12 790 1680 3310 4980 6720 8190 10200 11470 13165 14490 GPM 12 1000 2070 4230 6430 8580 10585 12885 14310 16385l/min 89 190 374 563 759 925 1153 1296 1488 1637 l/min 113 234 478 727 970 1196 1456 1617 1852

45 115 112 109 108 106 106 104 103 102 102 45 88 84 82 81 81 80 78 78 7716 840 1740 3295 4930 6580 8190 10245 11420 13263 14515 16 915 2085 4220 6360 8480 10570 12965 14405

95 197 372 557 744 925 1158 1290 1499 1640 103 236 477 719 958 1194 1465 162861 153 150 148 146 142 139 137 137 136 132 61 119 114 112 110 110 109 108 10820 800 1630 3280 4880 6440 8190 10290 11370 13360 20 795 1905 4130 6260 8325 10510 12885 14830

90 184 371 551 728 925 1163 1285 1510 90 215 467 707 941 1188 1456 167676 191 188 185 182 177 174 171 171 170 76 150 147 144 140 139 136 135 13025 660 1550 3230 4865 6420 8145 10130 11275 25 506 1755 3945 6075 8175 10390 12635 15000

75 175 365 550 725 920 1145 1274 57 198 446 686 924 1174 1428 169595 239 235 232 229 227 220 216 214 95 187 184 180 175 174 170 168 16230 1440 3180 4850 6400 8100 9970 11180 30 1500 3690 5880 7975 10165 12365 13920

163 359 548 723 915 1127 1263 170 417 664 901 1149 1397 1573114 282 278 275 272 264 259 257 114 220 216 210 208 204 202 19535 1400 3090 4840 6370 8100 9790 11150 35 3430 5660 7725 9950 12020

158 349 547 720 915 1106 1260 388 640 873 1124 1358133 329 324 321 317 308 302 300 133 252 245 242 238 236

11150 Torque [lb-in] 12020 Torque [lb-in]1260 Torque (Nm) 1358 Torque (Nm)300 Speed (RPM) 236 Speed (RPM)

11


Performance DataSeries VIS




VIS 30 - 625 cm3/r [38.0 in3/r] ∆ Pressure

PSIbar

250 500 1000 1500 2000 2500 3000 3250 375015 35 70 105 140 170 205 225 260

4 1315 2480 5105 7660 10185 12415 14600 15965 18190149 280 577 866 1151 1403 1650 1804 2055

15 23 20 20 20 19 19 18 17 178 1365 2650 5500 8250 11030 13755 16405 17845

154 299 622 932 1246 1554 1854 2016Flow 30 46 44 44 44 43 43 42 42GPM 12 1290 2600 5480 8400 11103 13830 16530 18220l/min 146 294 619 949 1255 1563 1868 2059

45 68 66 65 64 64 63 62 6216 1015 2550 5475 8300 11053 13800 16655 18170

115 288 619 938 1249 1559 1882 205361 92 90 89 87 87 86 86 8520 790 2280 5280 8130 10880 13655 16405 18095

89 258 597 919 1229 1543 1854 204576 117 116 114 111 110 108 107 10325 420 2030 4910 7710 10560 13430 16035

47 229 555 871 1193 1518 181295 148 145 143 142 139 135 13430 1585 4385 7285 10110 12960 15615

179 496 823 1142 1464 1764114 172 171 170 166 162 16435 3890 6765 9565 12460

440 764 1081 1408133 201 199 196 190

12460 Torque [lb-in]1408 Torque (Nm)190 Speed (RPM)

12


Dimension —Series VIS 30 (Standard andWheel Mount – SAE)

Standard SAE CCMounting Flange

Displ.cm3/r [in3/r]246 [15.0]323 [19.7]397 [24.2]492 [30.0]623 [38.0]

Xmm [inch]

209,3 [8.24]216,9 [8.54]224,0 [8.82]233,4 [9.19]246,1 [9.69]

Ymm [inch]

181,4 [7.14]189,0 [7.44]196,1 [7.72]205,5 [8.09]218,2 [8,59]

246 [15.0]323 [19.7]397 [24.2]492 [30.0]623 [38.0]

Wheel Motors (SAE)

Wheel Motors (SAE)

Standard Motors (SAE)

Standard Motors (SAE)

124,5 [4.90]132,1 [5.20]139,2 [5.48]148,6 [5.85]161,3 [6.35]

96,5 [3.80]104,1 [4.10]111,2 [4.38]120,7 [4.75]133,3 [5.25]

71,4[2.81]Max.

68,8[2.71]Max. (2)

41,40/39,88[1.630/1.570]

41,40/39,88[1.630/1.570]

66,7[2.63]Max.

29,2/28,8[1.15/1.13]

8,1/7,7[.32/.30]

16,13/14,61[.635/.575]

97,2/96,8[3.83/3.81]

132,8/132,4[5.23/5.21]Dia.

139,70/139,57[5.500/5.495]Pilot Dia.

14,52/14,12[.572/.556]Dia. Thru (4)

180,8 [7.12]Max. (2)

84,1[3.31]Max.

133,6 [5.23]Max.15,2 [.60]

R Min. (4)

184,15[7.250]Dia. B.C.

Port APort B

X

Y

Case DrainPort

Case DrainPort

Port B

Port

Port A

1–1/16-12 UN-2B SAE O-ring Ports (2)9/16-18 UNF-2B SAE O-ring Case Drain Port (1)

Standard RotationViewed from Shaft EndPort A Pressurized — CWPort B Pressurized — CCW

71,4[2.81]Max.

68,8[2.71]Max. (2)

65,6/64,0[2.58/2.52]

66,7[2.63]Max.

14,52/14,12[.572/.556]Dia. Thru (4)

2 x 147,3[5.80] Max.

84,1[3.31]Max.

133,6[5.23] Max.

14,5 [.57]R Min. (4)

161,92[6.375]Dia. B.C.

Port APort B

OptionalRelief Valve

X

Y

Port

126,98/126,92[4.999/4.997]Pilot Dia.

80,0/78,2 [3.15/3.09]

12,4/12,0 [.49/.47]

Case Drain PortCross Section

24,6/24,2 [.97/.95]Case DrainPort


13


Dimension —Series VIS 30 (Standard andWheel Mount – ISO)

Standard Motors (ISO)

18,3/17,7 [.72/.70]22,7/22,1 [.89/.87]31,8/29,2 [1.25/1.15]

124,3/123,7[4.89/4.87]Dia.

125,00/124,94[4.921/4.919]Pilot Dia.

100,8/99,3 [3.97/3.91]

9,2/8,6 [.36/.34]

XY

Case DrainPort

Port

Displ.cm3/r [in3/r]

VIS 30 Standard Motor (ISO)

VIS 30 Wheel Motor (ISO)

Wheel Motors (ISO)

246 [15.0]323 [19.7]397 [24.2]492 [30.0]623 [38.0]

Xmm [inch]

197,4 [7.77]205,0 [8.07]212,0 [8.35]221,5 [8.72]234,2 [9.22]

Ymm [inch]

169,4 [6.67]177,0 [6.97]184,1 [7.25]193,2 [7.61]206,2 [8.12]

246 [15.0]323 [19.7]397 [24.2]492 [30.0]623 [38.0]

123,2 [4.85]130,6 [5.14]137,7 [5.42]147,1 [5.79]160,0 [6.30]

95,2 [3.75]102,6 [4.04]109,7 [4.32]119,1 [4.69]132,1 [5.20]

71,4[2.81]Max.

68,8[2.71]Max.

66,7[2.63]Max.

14,46/13,54[.569/.533]Dia. Thru (4)

147,3 [5.80]Max. (2)

84,1[3.31]Max.

133,6 [5.23]Max.

14,5 [.57]R Min. (4)

160,00 [6.299]Dia. B.C.

Port A Port B

Case DrainPort

Port B

Port A

Case DrainPort

71,4[2.81]Max.

68,8[2.71]Max. (2)

66,7[2.63]Max.

27,9/27,5[1.10/1.08]

14,73/13,21[.580/.520]

6,0/5,6[.24/.22]

98,5/98,1[3.88/3.86]

132,8/132,3[5.23/5.21]Dia.

160,02/159,82[6.300/6.292]Pilot Dia.

18,21/17,81[.717/.701]Dia. Thru (4)180,8 [7.12]

Max. (2)

84,1[3.31]Max.

133,6 [5.23]Max.

15,2 [.60]R Min. (4)

200,00[7.874]Dia. B.C.

Port A Port B

X

Y

Port

Standard RotationViewed from Shaft EndPort A Pressurized — CWPort B Pressurized — CCW

G 3/4 (BSP) O-ring Ports (2)G 1/4 (BSP) O-ring Case Drain Port (1)

41,40/39,88[1.630/1.570]

41,40/39,88[1.630/1.570]



Case Drain PortCross Section

65,6/64,0[2.58/2.52]

14


Dimensions —Series VIS 30 (Bearingless)

Displ.cm3/r [in3/r]246 [15.0]323 [19.7]397 [24.2]492 [30.0]623 [38.0]

Xmm [inch]115,8 [4.56]123,4 [4.86]130,6 [5.14]140,0 [5.51]152,6 [6.01]

Ymm [inch] 90,2 [3.55] 97,8 [3.85]104,9 [4.13]114,0 [4.49]127,0 [5.00]

For Series VIS 30 bearingless motorapplication information contact yourEaton representative (mating couplingblanks available from EatonCorporation).Note: After machining blank, part mustbe hardened per Eaton specification.

Standard RotationViewed from Drive EndPort A Pressurized — CWPort B Pressurized — CCW

Mating Coupling BlankEaton Part No. 13429-002

ShaftFace SealFurnishedwithMotor

20,9/19,3[.82/.76] 12,70/12,19

[.500/.480]

127,00/126,95[5.000/4.998]Pilot Dia. 161,92 [6.375]

Dia. Bolt Circle

Case DrainPort Dim.Shown AboveReturn to

Case Drain 14,53/14,17[.572/.558]Dia. Thru (4)

Y Max.

X Max.

Shaft Installation —See Page 35

Port

Port B

Port A

40,64 [1.600]

40,64 [1.600]

MountingSurface

MountingSurface

45°

26,57 [1.046]

12,85[.506]

68,8[2.71]Max. (2)

66,7[2.63]Max.

71,4[2.81]Max.

Port A Port B

133,6 [5.23] Max.

196,1 [7.72] Max. (2)

74,07 [2.916]

Case DrainPort

1–1/16-12 UN-2B SAE O-ring Ports (2)9/16-18 UNF-2B SAE O-ringCase Drain Port (1)orG 3/4 (BSP) O-ring Ports (2)G 1/4 (BSP) O-ring Case Drain Port (1)

15


Dimensions — ShaftsSeries VIS 30 (SAE)

40 mm Straight

1-1/2 Inch17 Tooth Slined

1-3/4 Inch Tapered

44,45[1.750] Dia.

16,13/15,36[.635/.605]

4,1 [.16]Dia. Thru

5,54/5,20[.218/.205]

11,138/11,112[.4385/.4375]

31,7 [1.25]

1-1/4-18 UNEF - 2A

Slotted Hex Nut Torque:Dry — 640 Nm [475 lb-ft]Lubricated — 475 Nm [350 lb-ft]

SAE J501 Standard Tapered Shaft125,00 ± 0,17 Taper per Meter[1.500 ± .002 Taper per Foot]

40,018/39,992[1.5755/1.5745]Dia.

74,7 [2.94] Max.Coupling Engagement

55,76/54,99[2.195/2.165]

101,2/98,3[3.99/3.87] 178,1/175,0

[7.02/6.89]

3/8-16 UNF-2B20,1 [.79]Min. Depth

78,6/75,8[3.10/2.98]

39,1 [1.54] Min. Full Spline


38,10 [1.500] Dia.Flat Root Side Fit17 Tooth 12/24 Spline to FitANSI B92.1 1970

163,6/160,5[6.45/6.32]

93,1/90,3[3.67/3.55]

16,0/13,5[.65/.53]

Mounting Surface

Mounting Surface

Mounting Surface

Mounting Surface

43,03/42,72[1.694/1.682]

8,000/7,910[.3149/.3115]

M12 x 1.7525,4 [1.00]Min. Depth

94,4/91,6[3.72/3.60] 63,8/62,2

[2.51/2.45]9,2/4,5[.36/.18]

12,000/11,957[.4724/.4708]

179,4/176,2[7.07/6.94]

Mounting Surface

Mounting Surface

Standard Mount

Wheel Mount

Standard Mount

Wheel Mount

Standard Mount

Wheel Mount

Note: For motortorque ratings above 875 Nm [7750 lb-in]use split coupler.

16


Dimensions — ShaftsSeries VIS 30 (ISO)

40 mm Straight

1-1/2 Inch17 Tooth Slined

45 mm Tapered

40,018/39,992[1.5755/1.5745]Dia.


28,63/27,35[1.127/1.077]

18,3/17,7[.72/.70]

6,4/5,8 [.25/.23]Dia. Thru

12,000/11,957[.4724/.4708]

23,47/23,31[.924/.918]

46,0[1.81]

45,03/44,97[1.773/1.771]Dia.

M30 x 2-6H

10:1 TaperPer ISOR775104,4/101,3

[4.11/3.99] 182,6/179,6[7.19/7.07]

M12 x 1.7525,4 [1.00]Min. Depth

56,6 [2.23] Min. Full Spline


38,10 [1.500] Dia.Flat Root Side Fit17 Tooth 12/24 Spline to FitANSI B92.1 1970

182,6/179,3[7.19/7.06]

37,1/34,5[1.46/1.36]

Mounting Surface

Mounting Surface

Mounting Surface

Mounting Surface

Wheel Mount

Standard Mount

43,03/42,72[1.694/1.682]

8,000/7,910[.3149/.3115]

M12 x 1.7525,4 [1.00]Min. Depth

108,5/105,4[4.27/4.15]

108,5/105,4[4.27/4.15]

108,5/105,4[4.27/4.15]

67,6/66,0[2.66/2.60]

9,2/4,5[.36/.18]

12,000/11,957[.4724/.4708]

182,6/179,3[7.19/7.06]


Mounting Surface

Mounting Surface

Wheel Mount

Standard Mount

Wheel Mount

Standard Mount


17


Shaft Side Load CapacitySeries VIS 30 (SAE)

Mounting Surface

Mounting Surface

0

0 [-1] [-2] [-3] [-4] [-5] [-6] [inch][5][6] [4] [3] [2] [1]

-20 -40 -60 -80 -100 -120 -140 mm120140160 80100 60 40 20

0

0 [-1] [-2] [-3] [-4] [-5] [-6] [-7] [-8] [-9] [inch][2][3] [1]

-20 -40 -60 -80 -100 -120 -140 -160 -180 -200 -220 mm6080 40 20

Standard Mount

Wheel Mount

0

[ 4000]

[ 8000]

[12000]

[16000]

0

1000

2000

3000

4000

5000

6000

7000

8000

9000

[lb]kg[20000]

0

[ 4000]

[ 8000]

[12000]

[16000]

0

1000

2000

3000

4000

5000

6000

7000

8000

9000

[lb]kg[20000]

These curves indicate the radial load capacityon the motor shaft(s) at various locations.

For 3,000,000 shaft revolutions or 500 hours — Increase these shaft loads 52%.

50 1.23100 1.00200 .81300 .72400 .66500 .62600 .58700 .56800 .54

RPM Multiplication Factor

The curve is based on B 10 bearing life (2000hours or 12,000,000 shaft revolutions at 100 RPM ) at rated output torque. To determineradial load at speeds other than 100 RPM,multiply the load values given on the bearingcurve by the factors in the chart below.

18


Shaft Side Load CapacitySeries VIS 30 (ISO)

Mounting Surface

Wheel Mount

Mounting Surface

Standard Mount

0

[ 4000]

[ 8000]

[12000]

[16000]

0

1000

2000

3000

4000

5000

6000

7000

8000

9000

[lb]kg[20000]

0

[ 4000]

[ 8000]

[12000]

[16000]

0

1000

2000

3000

4000

5000

6000

7000

8000

9000

[lb]kg[20000]

0

0 [-1] [-2] [-3] [-4] [-5] [-6] [-7] [inch][6] [5] [4] [3] [2] [1]

-20 -40 -60 -80 -100 -140 -160 mm-120120140 80100 60 40 20

0

0 [-1] [-2] [-3] [-4] [-5] [-6] [-7] [-8] [-9] [inch][3] [2] [1]

-20 -40 -60 -80 -100 -140-120 -160 -180 -200 -220 mm80 60 40 20



50 1.23100 1.00200 .81300 .72400 .66500 .62600 .58700 .56800 .54



19


Product NumbersSeries VIS 30

Displ. cm3/r [in3/r] / Product Number492 [30.0]397 [24.2]323 [19.7]246 [15.0]

PortSizeShaft

40 mm Straight

Mounting

SAE

ISO

Standard

623 [38.0]

161-0030

Add three digit prefix —159-to four digit number from chart forcomplete product number—Example 159-0032.Orders will not be accepted without three digit prefix.

1-1/16-12 UNF O-ring (2)9/16-18 UNC Drain Port (1) 159-0032 -0035 -0038 -0041 -0044

1–3/4 inch Tapered

1-1/16-12 UNF O-ring (2)9/16-18 UNC Drain Port (1)

159-0031 -0034 -0037 -0040 -0043

1–1/2 inch 17 Tooth Splined

1-1/16-12 UNF O-ring (2)9/16-18 UNC Drain Port (1)

159-0033 -0036 -0039 -0042 -0045

40 mm Straight 1-1/16-12 UNF O-ring (2)9/16-18 UNC Drain Port (1) 160-0018 -0021 -0024 -0027 -0030

1–3/4 inch Tapered

1–1/2 inch 17 Tooth SplinedWheel1-1/16-12 UNF O-ring (2)9/16-18 UNC Drain Port (1)

160-0017 -0020 -0023 -0026 -00291-1/16-12 UNF O-ring (2)9/16-18 UNC Drain Port (1)

160-0019 -0022 -0025 -0028 -0031

Bearingless

Note: All product numbers in the chart (above) are motors without charge pressue relief. These motors without relief valves would generally beused in open loop cuircuits. For closed loop curcuit as shown on page 7, a charge pressure relief valve is required.



Displ. cm3/r [in3/r] / Product Number492 [30.0]397 [24.2]323 [19.7]246 [15.0]

PortSizeShaft

40 mm Straight

Mounting

Standard

623 [38.0]

161-0035


G 3/4 (BSP) (2)G 1/4 (BSP) Drain Port (1) 159-0048 -0051 -0054 -0057 -0060

45 mm Tapered

G 3/4 (BSP) (2)G 1/4 (BSP) Drain Port (1)

159-0046 -0049 -0052 -0055 -0058

1–1/2 inch 17 Tooth Splined

G 3/4 (BSP) (2)G 1/4 (BSP) Drain Port (1)

159-0047 -0050 -0053 -0056 -0059

40 mm Straight G 3/4 (BSP) (2)G 1/4 (BSP) Drain Port (1) 160-0034 -0037 -0040 -0043 -0046

45 mm Tapered

1–1/2 inch 17 Tooth SplinedWheelG 3/4 (BSP) (2)G 1/4 (BSP) Drain Port (1)

160-0032 -0035 -0038 -0041 -0044G 3/4 (BSP) (2)G 1/4 (BSP) Drain Port (1)

160-0033 -0036 -0039 -0042 -0045

Bearingless G 3/4 (BSP) (2)G 1/4 (BSP) Drain Port (1) 161-0032 -0035 -0036 -0037 -0038

20


Model CodeSeries VIS 30

Position 11 Low Pressure Relief (Required for Closed LoopApplications)

0 ............... None1 ............... Set at 4,5 bar [ 65 PSI]2 ............... Set at 15,6 bar [220 PSI]Position 12, 13 Special Features00 ............. NonePosition 14 Paint/ Special Packaging0 ............... No Paint, Individual BoxA .............. Painted Low Gloss Black, Individual BoxB .............. No Paint, Bulk Box OptionC .............. Painted Low Gloss Black, Bulk Box OptionPosition 15 Eaton Assigned Code when Applicable0 ............... Assigned CodePosition 16 Eaton Assigned Design CodeB .............. Assigned Design Code

Position 1, 2, 3 Product SeriesACD ........... VIS 30 MotorPosition 4, 5 Displacement cm3/r [in3/r]15 ............. 246 [15.0]20 ............. 323 [19.7]24 ............. 397 [24.2]30 ............. 492 [30.0]38 ............. 623 [38.0]

Position 6 – 10 Mounting Type with ...... Output Shaft... Port A and Port B (Size and Type)... Shuttle Valve with Case Drain (Port Size)

A00AA ........ 4 Bolt (Bearingless) with ...... None (Bearingless)... 1-1/16 - 12 UN - 2B, Size 12 O-ring Port

(Accepts Fittings for SAE J1926)... 9/16 - 18 UNF - 2B, Size 6 O-ring Port

A00BB ........ 4 Bolt (Bearingless) with ...... None (Bearingless)... G 3/4 (BSP) Straight Thread ports... G 1/4 (BSP) Straight Thread port

F07AA ........ 4 Bolt Standard Mount (SAE) with ...... 40 mm Straight (with Nut and Key)... 1-1/16 - 12 UN - 2B, Size 12 0-ring Port

(Accepts Fittings for SAE J1926)... 9/16-18 UNF - 2B, Size 6 0-ring Port

F08AA ........ 4 Bolt Standard Mount (SAE) with ...... 1-1/2 inch Splined (17 Tooth)... 1-1/16 - 12 UN - 2B, Size 12 0-ring Port

(Accepts Fittings for SAE J1926)... 9/16 - 18 UNF - 2B, Size 6 0-ring Port

F02AA ........ 4 Bolt Standard Mount (SAE) with ...... 1-3/4 inch Tapered (with Nut and Key)... 1-1/16 - 12 UN - 2B, Size 12 0-ring Port


G07AA ........ 4 Bolt Wheel Mount (SAE) with ...... 40 mm Straight (with Nut and Key)... 1-1/16 - 12 UN-2B, Size 12 0-ring Port


G08AA ........ 4 Bolt Wheel Mount (SAE) with ...... 1-1/2 inch Splined (17 Tooth)... 1-1/16 - 12 UN-2B, Size 12 0-ring Port


The following 16-digit coding system has been developed to identify all of the configuration options for the Series VIS 30 motor. Use this modelcode to specify a motor with the desired features. All 16-digits of the code must be present when ordering. You may want to photocopy thematrix below to ensure that each number is entered in the correct box.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

A C D 0 0

Model Code — VIS 30 Series Motors

G02AA ........ 4 Bolt Wheel Mount (SAE) with ...... 1-3/4 inch Tapered (with Nut and Key)... 1-1/16 - 12 UN-2B, Size 12 0-ring Port

(Accepts Fittings for SAE J1926)... 9/16-18 UNF-2B, Size 6 0-ring Port

H10BB ........ 4 Bolt Standard Mount (ISO) with ...... 40 mm Straight (with Nut and Key)... G 3/4 (BSP) Straight Thread ports... G 1/4 (BSP) Straight Thread port

H09BB ........ 4 Bolt Standard Mount (ISO) with ...... 1-1/2 inch Splined Shaft (17 Tooth)... G 3/4 (BSP) Straight Thread ports... G 1/4 (BSP) Straight Thread Port

H01BB ........ 4 Bolt Standard Mount (ISO) with ...... 45 mm Tapered Shaft (with Nut and Key)... G 3/4 (BSP) Straight Thread ports... 1/4 (BSP) Straight Thread Port

B10BB ........ 4 Bolt Wheel Mount (ISO) with ...... 40 mm Straight Shaft (with Nut and Key)... G 3/4 (BSP) Straight Thread ports... G 1/4 (BSP) Straight Thread Port

B09BB ........ 4 Bolt Wheel Mount (ISO) with ...... 1-1/2 inch Splined Shaft (17 Tooth)... G 3/4 (BSP) Straight Thread ports... G 1/4 (BSP) Straight Thread Port

B01BB ........ 4 Bolt Wheel Mount (ISO) with ...... 45 mm Tapered Shaft (with Nut and Key)... G 3/4 (BSP) Straight Thread ports... G 1/4 (BSP) Straight Thread Port

21


SpecificationsSeries VIS 45

Continuous

IntermittentPressure∆ bar[∆ PSI]

Continuous

Intermittent

Max. Speed (RPM) @...................... Flow

Specification Data — Series VIS 45

Flowl/min[GPM]

Displ. cm3/r[in3/r]

TorqueNm[lb-in]

Continuous

Intermittent

A simultaneous maximum torque and maximum speed NOT recommended.

Continuous

Intermittent

Peak

207 [3000]

345 [5000]

519[31.7]

170 [45]

189 [50]

328

364

1522 [13471]

2451 [21695]

379 [5500]

207 [3000]

345 [5000]

572[34.9]

170 [45]

189 [50]

298

331

1676 [14831]

2699 [23885]

379 [5500]

207 [3000]

345 [5000]

803[49.0]

170 [45]

189 [50]

212

236

2353 [20823]

3788 [33535]

379 [5500]

207 [3000]

345 [5000]

636[38.8]

170 [45]

189 [50]

268

298

1863 [16488]

3000 [26554]

379 [5500]

207 [3000]

327 [4750]

991[60.5]

170 [45]

189 [50]

172

191

2905 [25710]

4444 [39335]

362 [5250]

190 [2750]

293 [4250]

1245[76.0]

170 [45]

189 [50]

137

152

3345 [29605]

4995 [44211]

327 [4750]

Recommended Filtration — per ISO Cleanliness Code, level 18/13

Shuttle — Standard

Low Pressure Relief Valve — Required for closed loop circuit.

To assure best motor life, run motor for approximately one hour at 30% ofrated pressure before application to full load. Be sure motor is filled withfluid prior to any load applications.

Recommended Maximum System Operating Temp. — Is 82° C [180° F]

Recommended Fluids — Premium quality, anti-wear type hydraulic oil with a viscosity of not less than70 SUS at operating temperature.

∆ bar [∆ PSI] — True pressure difference between inlet port and outlet port.

Continuous Rating — Motor may be run continuously at these ratings.

Intermittent Operation — 10% of every minute.

Maximum Inlet Pressure — 400 bar [5800 PSI]. Do not exceed ∆ pressure rating (see chart above).Return Pressure — 6,9 - 21 bar [100 - 300 PSI]. Do not exceed ∆ pressure rating (see chart above). Case drain required.

Note: Optional version can be used without case drain.

Peak Operation — 1% of every minute.

172 [2500]

241 [3500]

1557[95.0]

170 [45]

189 [50]

109

122

3801 [33642]

5142 [45512]

Peak 2696 [23865] 2969 [26274] 4167 [36889]3300 [29209] 4889 [43269] 5495 [48632] 5656 [50063]

276 [4000]

End Cap Valve Plate Seals MountingFlange

OutputShaft

Geroler® Drive

Rear Bearing(Oil Lubricated)

Front Bearing(Grease Packed)

Seal Guard

Shuttle Valve

ReliefValve

22







PSI PSI

bar bar

250 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 250 500 1000 1500 2000 2500 3000 3500 4000 4500 5000

15 35 70 105 140 170 205 240 275 310 345 15 35 70 105 140 170 205 240 275 310 345

4 1050 2150 4465 6715 8500 10560 12530 13945 16295 17635 19400 4 1150 2420 4970 7420 9630 12250 14500 16735 18625 20845 23150

119 243 505 759 961 1193 1416 1576 1841 1993 2192 130 273 562 838 1088 1384 1639 1891 2105 2355 2616

15 29 29 28 28 27 27 27 26 24 23 21 15 26 25 25 25 24 23 23 22 21 19 16

8 1060 2170 4505 6690 8655 10740 12700 14215 16740 18220 19870 8 1160 2430 4980 7440 9810 12340 14690 17060 19150 21220 23240

120 245 509 756 978 1214 1435 1606 1892 2059 2245 131 275 563 841 1109 1394 1660 1928 2164 2398 2626

Flow 30 58 57 56 56 54 54 53 53 52 50 47 Flow 30 53 51 51 50 48 47 46 44 42 38 33

GPM 12 1075 2125 4465 6715 8930 10975 13200 14930 16955 18730 20475 GPM 12 1180 2400 4970 7465 10125 12700 15265 17215 19320 21650 23875

l/min 121 240 505 759 1009 1240 1492 1687 1916 2116 2314 l/min 133 271 562 844 1144 1435 1725 1945 2183 2446 2698

45 87 86 85 83 82 81 80 79 78 74 71 45 79 76 76 75 72 70 69 67 65 60 53

16 1085 2070 4360 6660 9010 11245 13525 15505 17275 19490 21110 16 1210 2320 4920 7480 10000 12520 14990 17420 19740 21970 24010

123 234 493 753 1018 1271 1528 1752 1952 2202 2385 137 262 556 845 1130 1415 1694 1968 2231 2483 2713

60 116 114 113 111 109 108 106 106 104 99 94 60 104 102 100 99 98 97 96 94 91 88 83

20 1050 1995 4255 6475 8825 10975 13585 15715 17550 20160 22285 20 1170 2245 4800 7260 9835 12245 14815 17730 20015 22725 25285

119 225 481 732 997 1240 1535 1776 1983 2278 2518 132 254 542 820 1111 1384 1674 2003 2262 2568 2857

75 145 143 141 139 136 135 133 132 130 124 118 75 130 127 125 124 122 121 120 117 114 110 104

24 1020 1940 4200 6395 8715 11020 13610 15820 17780 20190 22600 24 1125 2150 4680 7210 9675 12175 14610 17285 19810 21740 24060

115 219 475 723 985 1245 1538 1788 2009 2281 2554 127 243 529 815 1093 1376 1651 1953 2239 2457 2719

91 174 172 169 167 163 162 160 158 156 149 142 91 158 155 152 148 147 146 146 144 140 138 133

28 1745 4080 6355 8685 11040 13430 15630 17650 20255 22520 28 1930 4550 7150 9670 12200 14710 17190 19590 21840 24000

197 461 718 981 1248 1518 1766 1994 2289 2545 218 514 808 1093 1379 1662 1942 2214 2468 2712

106 200 197 195 190 189 186 185 182 174 165 106 181 177 173 171 171 170 168 164 161 155

32 1685 3940 6235 8500 10840 13200 15515 17550 20160 32 1860 4400 7000 9430 12005 14480 17070 19520 21740

190 445 705 961 1225 1492 1753 1983 2278 210 497 791 1066 1357 1636 1929 2206 2457

121 229 226 222 218 216 213 211 208 198 121 207 202 198 196 195 194 192 187 184

36 1640 3680 5915 8280 10560 12865 15125 17320 19890 36 1850 4110 6670 9210 11670 14065 16635 19120 21450

185 416 668 936 1193 1454 1709 1957 2248 209 464 754 1041 1319 1589 1880 2161 2424

136 257 254 250 245 243 239 238 234 223 136 233 227 222 220 220 219 216 212 207

40 3355 5750 8060 10235 12540 14810 16980 19875 40 3695 6370 8910 11420 13900 16430 18950

379 650 911 1157 1417 1674 1919 2246 418 720 1007 1290 1571 1857 2141

151 282 278 272 270 266 264 260 248 151 256 251 246 242 240 238 233

45 3205 5595 7845 10015 12365 14535 16410 45 3530 6205 8665 11185 13705 16105 18320

362 632 886 1132 1397 1642 1854 399 701 979 1264 1549 1820 2070

170 317 313 306 304 299 297 293 170 288 282 277 272 270 268 262

50 2970 5370 7650 9765 12210 14400 50 3270 5890 8340 10770 13400 16000

336 607 864 1103 1380 1627 370 666 942 1217 1514 1808

189 353 348 340 338 333 330 189 320 317 312 306 303 297

14400 Torque (lb-in) 16000 Torque (lb-in)

1627 Torque (Nm) 1606 Torque (Nm)

330 Speed (RPM) 297 Speed (RPM)

23







PSI PSI

bar bar

250 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 250 500 1000 1500 2000 2500 3000 3500 4000 4500 5000

15 35 70 105 140 170 205 240 275 310 345 15 35 70 105 140 170 205 240 275 310 345

4 1280 2710 5555 8290 10354 12965 15625 17815 20925 23765 25875 4 1615 3380 7240 10755 13595 16775 19840 21915 26075 28735 31980

145 306 628 937 1170 1465 1766 2013 2365 2685 2924 182 382 818 1215 1536 1896 2242 2476 2946 3247 3614

15 24 23 23 22 22 21 20 19 18 17 15 15 19 18 17 17 17 17 16 15 14 13 12

8 1300 2735 5605 8330 10540 13180 15840 18160 21110 24230 26210 8 1635 3405 7300 10815 13850 17060 20110 22340 26130 29210 32470

147 309 633 941 1191 1489 1790 2052 2385 2738 2962 185 385 825 1222 1565 1928 2272 2524 2953 3301 3669

Flow 30 47 45 45 45 45 44 43 41 38 36 34 Flow 30 38 36 35 34 34 34 34 34 32 31 29

GPM 12 1315 2680 5470 8360 10880 13470 16460 19070 21345 24670 26980 GPM 12 1655 3340 7235 10855 14290 17430 20900 23460 26555 29660 32740

l/min 149 303 618 945 1229 1522 1860 2155 2412 2788 3049 l/min 187 377 818 1227 1615 1970 2362 2651 3001 3352 3700

45 71 68 68 67 67 66 64 62 61 58 54 45 56 55 52 52 51 51 50 50 49 47 45

16 1330 2610 5425 8290 10970 13800 16865 19810 22085 25000 27670 16 1675 3250 7070 10765 14410 17860 21415 24370 27050 30590 33215

150 295 613 937 1240 1559 1906 2239 2496 2825 3127 189 367 799 1216 1628 2018 2420 2754 3057 3457 3753

60 95 91 91 89 89 88 85 83 81 77 72 60 75 73 70 69 68 68 67 67 66 63 60

20 1280 2515 5295 8060 10745 13470 16820 20120 22440 25550 20 1615 3135 6900 10465 14120 17430 21165 24690 27490 31645

145 284 598 911 1214 1522 1901 2274 2536 2887 182 354 780 1183 1596 1970 2392 2790 3106 3576

75 118 113 113 112 112 110 107 103 102 97 75 94 91 87 86 85 85 84 84 83 79

24 1250 2450 5230 7960 10615 13500 16790 20070 22730 25860 24 1575 3055 6810 10335 13945 17480 21285 24650 27845 31720

141 277 591 899 1199 1526 1897 2268 2568 2922 178 345 770 1168 1576 1975 2405 2785 3146 3584

91 142 136 136 134 134 132 128 124 122 116 91 113 109 104 103 102 102 101 101 100 95

28 2200 5075 7910 10580 13550 16745 19965 22570 26220 28 2740 6610 10275 13895 17530 21265 24560 27650

249 573 894 1196 1531 1892 2256 2550 2963 310 747 1161 1570 1981 2403 2775 3124

106 159 159 156 156 154 149 145 142 135 106 127 122 120 119 119 118 118 116

32 2125 4900 7760 10350 13300 16460 19820 22440 32 2645 6385 10080 13595 17210 20900 24380 27490

240 554 877 1170 1503 1860 2240 2536 299 722 1139 1536 1945 2362 2755 3106

121 181 181 179 179 176 171 165 163 121 146 139 138 136 136 134 134 133

36 2100 4575 7365 10080 12960 16040 19320 22150 36 2640 5960 9560 13245 16775 20370 23765 27130

237 517 832 1139 1464 1813 2183 2503 298 673 1080 1497 1896 2302 2685 3066

136 204 204 201 201 198 192 186 183 136 164 157 155 153 153 151 151 149

40 4175 7160 9815 12560 15640 18920 21715 40 5435 9295 12895 16255 19860 23275

472 809 1109 1419 1767 2138 2454 614 1050 1457 1837 2244 2630

151 227 223 223 220 213 207 203 151 174 172 170 170 168 168

45 3990 6965 9550 12290 15420 18565 45 5195 9045 12550 15905 19580 22840

451 787 1079 1389 1742 2098 587 1022 1418 1797 2213 2581

170 255 251 251 248 240 233 170 196 194 191 191 189 189

50 3695 6690 9320 11985 15225 18395 50 4810 8685 12245 15510 19335 22630

418 756 1053 1354 1720 2079 544 981 1384 1753 2185 2557

189 283 279 279 275 267 258 189 218 215 213 213 210 210




24




PSI PSI

bar bar

250 500 1000 1500 2000 2500 3000 3500 4000 4500 4750 250 500 1000 1500 2000 2500 3000 3500 4000 4250

15 35 70 105 140 170 205 240 275 310 330 15 35 70 105 140 170 205 240 275 295

4 2000 4100 8625 12625 16050 20085 24155 28320 32590 35150 37040 4 2160 4800 9965 15150 20200 26450 30670 39180 42800 43220

226 463 975 1427 1814 2270 2730 3200 3683 3972 4186 244 542 1126 1712 2283 2989 3466 4427 4836 4884

15 15 15 15 15 14 14 14 13 12 11 10 15 12 11 11 11 11 10 10 9 9 9

8 2020 4130 8700 12740 16350 20420 24485 28400 32855 35670 37255 8 2250 4830 10370 15760 22010 27180 33335 39845 43665 44405

228 467 983 1440 1848 2307 2767 3209 3713 4031 4210 254 546 1172 1781 2487 3071 3767 4502 4934 5018

Flow 30 30 30 29 29 29 28 28 27 25 25 24 Flow 30 24 23 22 22 21 20 20 19 19 19

GPM 12 2050 4050 8625 12785 16870 20865 25445 28555 32920 35865 37630 GPM 12 2405 5390 10910 17290 22780 28470 34170 40145 44160 47220

l/min 232 458 975 1445 1906 2358 2875 3227 3720 4053 4252 l/min 272 609 1233 1954 2574 3217 3861 4536 4990 5336

45 46 45 44 44 43 43 41 41 41 40 39 45 36 33 33 32 32 32 32 31 31 30

16 2070 3945 8425 12680 17015 21380 26070 29665 33020 36620 16 2410 5150 10930 16970 22880 28595 33900 39505 44510

234 446 952 1433 1923 2416 2946 3352 3731 4138 272 582 1235 1918 2585 3231 3831 4464 5030

60 61 60 58 58 58 57 55 55 54 53 60 48 46 45 44 43 43 43 42 41

20 2000 3800 8220 12330 16665 20865 25765 30060 33550 37880 20 2345 4895 10655 16470 21960 27450 33130 37710 43895

226 429 929 1393 1883 2358 2911 3397 3791 4280 265 553 1204 1861 2481 3102 3744 4261 4960

75 76 75 73 73 72 71 69 69 68 66 75 60 59 57 56 56 56 55 55 54

24 1950 3700 8120 12180 16460 20890 25820 30090 33990 24 2190 4760 10460 15920 21230 26535 32320 37680 42670

220 418 918 1376 1860 2361 2918 3400 3841 247 538 1182 1799 2399 2998 3652 4258 4822

91 91 90 88 88 86 85 83 83 82 91 73 70 68 67 67 67 66 66 65

28 3325 7880 12100 16405 20990 25890 29900 33750 28 1985 4260 10070 15860 21200 26420 32480 37505

376 890 1367 1854 2372 2926 3379 3814 224 481 1138 1792 2396 2985 3670 4238

106 105 102 102 101 99 97 97 95 106 85 82 80 78 78 78 77 77

32 3210 7610 11870 16050 20605 25445 29685 33550 32 4100 9770 15410 20775 26300 31920 37240

363 860 1341 1814 2328 2875 3354 3791 463 1104 1741 2348 2972 3607 4208

121 120 117 117 115 114 110 110 109 121 94 91 90 89 89 88 88

36 3200 7100 11260 15640 20080 24800 28930 36 4090 9060 14650 20065 25670 31110

362 802 1272 1767 2269 2802 3269 462 1024 1655 2267 2901 3515

136 135 131 131 130 128 124 124 136 106 103 101 101 100 99

40 6480 10950 15220 19460 24175 28335 40 8300 14150 19570 24900 30325

732 1237 1720 2199 2732 3202 938 1599 2211 2814 3427

151 146 146 144 142 138 138 151 114 113 112 111 110

45 6190 10655 14815 19040 23830 45 8100 13970 19310 24610

699 1204 1674 2152 2693 915 1579 2182 2781

170 164 164 162 160 155 170 129 127 126 125

50 5735 10230 14455 18570 23540 50 7900 13790 19050 24315

648 1156 1633 2098 2660 893 1558 2153 2748

189 183 183 180 178 173 189 143 141 140 139







25






VIS 45 - 1560 cm3/r [95.0 in3/r] ∆ Pressure

PSI

bar

250 500 1000 1500 2000 2500 3000 3500

15 35 70 105 140 170 205 240

4 2700 5675 11915 18520 24915 30865 37610 42320

305 641 1346 2093 2815 3488 4250 4782

15 10 9 9 9 9 8 8 8

8 2815 5910 12400 19260 25590 31745 39315 44150

318 668 1401 2176 2892 3587 4443 4989

Flow 30 19 19 18 18 18 17 16 15

GPM 12 3010 6305 13045 20495 26600 33070 39885 46670

l/min 340 712 1474 2316 3006 3737 4507 5274

45 29 28 28 27 26 25 23 22

16 3020 6300 13365 20740 27275 33950 40455 48630

341 712 1510 2344 3082 3836 4571 5495

60 38 38 37 36 35 34 31 29

20 2930 6150 13205 20495 27110 34830 39820

331 695 1492 2316 3063 3936 4500

75 48 47 46 45 44 42 39

24 2780 5910 12880 19755 26930 34390 39315

314 668 1455 2232 3043 3886 4443

91 58 56 55 54 53 50 47

28 5310 12505 19635 26600 33950 38745

600 1413 2219 3006 3836 4378

106 66 64 63 62 59 55

32 5120 12075 19260 26260 33510 38180

579 1364 2176 2967 3787 4314

121 75 74 72 70 67 62

36 5100 11270 18270 25590 33070

576 1274 2065 2892 3737

136 85 83 81 79 76

40 10280 17765 24910 32630

1162 2007 2815 3687

151 92 90 88 84

45 9820 17285 24240

1110 1953 2739

170 104 101 99

50 9100 16600 23655

1028 1876 2673

189 115 113 110

23655 Torque (lb-in)

2673 Torque (Nm)

110 Speed (RPM)

26


Dimensions —Series VIS 45 (Standard Mount)

Case Drain Port Dim.See Page 31

Port

83,9[3.30]Max.

93,5[3.68]Max.

Displ. cm3/r[in3/r]

520 [31.7] 572 [34.9] 636 [38.8] 803 [49.0] 991 [60.5]1245 [76.0]1557 [95.0]

Fmm [inch]

254,2 [10.01]257,6 [10.14]261,4 [10.29]272,3 [10.72]284,2 [11.19]300,5 [11.83]320,3 [12.61]

250,1 [9.843] Dia. BC 20,75/20,39[.817/.803]Dia. (4)

236,73/235,20[9.32/9.26] (2)

F20,6/20,0 [.81/.79]2,8/2,2 [.11/.09]

199,97/199,82[7.873/7.867]Pilot Dia.

9,14/8,64 [.36/.34]

125,64/124,36[4.945/4.895]

MountingSurface

167,9 [6.61] Max.

Port BPort A

Port Dim.See Page 31

Port B

Port A


27


Dimensions —Series VIS 45 (Wheel Mount)

F

250,01 [9.843] Dia.

199,97/199,82[7.873/7.867]Pilot Dia.

Port

9,2/8,6[.36/.34]

48,90/47,62[1.925/1.875]

20,75/20,39[.817/.803] Dia. (4)150,4/149,9

[5.92/5.90] R.

23,2/22,6 [.91/.89]236,73/235,20[9.32/9.26] (2)

83,9[3.30]Max.

93,5[3.68]Max.

Displ. cm3/r[in3/r]

520 [31.7] 572 [34.9] 636 [38.8] 803 [49.0] 991 [60.5]1245 [76.0]1557 [95.0]

Fmm [inch]

177,8 [7.00]181,1 [7.13]184,9 [7.28]195,8 [7.71]207,8 [8.18]224,0 [8.82]243,8 [9.60]

MountingSurface


Case Drain Port Dim.See Page 31

Port B

Port A


167,9 [6.61] Max.

Port BPort A

88,6/87,6[3.49/3.45]

28


Dimensions —Series VIS 45 (Bearingless)

110,3[4.34]Max. (4)

4 x 10° 4 x 10°

94,5 [3.72]Max. (4)

15,2 [.60]Min. R (8)

223,0/221,5[8.78/8.72]Dia.

Case Drain

190,50 [7.500]Dia. Bolt Circle

16,00/15,75[.630/.620]Dia. Thru (8)

23,11/22,61[.910/.890] (4)

9,14/8,89[.360/.350]

Port

25,40 [1.000]Case DrainPort Dim.See Page 31


Shaft Installation —See Page 36

83,9[3.30]Max.

Port B

Port A

158,75/158,626.250/6.245

93,5[3.68]Max.

Displ. cm3/r[in3/r]

520 [31.7] 572 [34.9] 636 [38.8] 803 [49.0] 991 [60.5]1245 [76.0]1557 [95.0]

Y Max.mm [inch]

154,4 [6.08]157,7 [6.21]161,5 [6.36]172,5 [6.79]184,4 [7.26]200,7 [7.90]220,5 [8.68]

Xmm [inch]

123,2 [4.85]126,5 [4.98]130,3 [5.13]141,2 [5.56]153,4 [6.04]169,7 [6.68]189,5 [7.46]

For Series VIS 45 bearingless motorapplication information contact yourEaton representative (mating couplingblanks available from EatonCorporation).Note: After machining blank, part mustbe hardened per Eaton specification.


Mating Coupling BlankEaton Part No. 201998-002

105,4 [4.15]Max.

ShaftFace SealFurnishedwith Motor

Y Max.

X Max.

95,20[3.750](4)

15,2 [.60]Min. R (4)

223,0/221,5[8.78/8.72]Dia.

Case Drain

190,50 [7.500]Dia. Bolt Circle

17,71/17,35[.697/.683]Dia. Thru (4)

MountingSurface

29


Dimensions — ShaftsSeries VIS 45

Standard Mount

Wheel Mount8,25/7,75[.325/.305]Dia. Thru

121,59/120,06[4.787/4.727]

32,25/31,75[1.270/1.250]

16,36/14,83[.644/.584]

30,2/29,8[1.19/1.17]

60,04/60,00[2.364/2.362]

10:1 Taper ISO R775

16,020/15,980[.6307/.6291]

32,34/32,18[1.273/1.267]

65,38/64,62[2.574/2.544]

M42 x 3 - 6H

93,06/91,54[3.664/3.604]

198,30/196,77[7.807/7.747]

Standard Mount

Wheel Mount

81,8/80,8[3.22/3.18]

66,675/66,655[2.6250/2.6242]

3,3 [.13]R Max.

106,55/105,03[4.195/4.135]

95,10/93,57[3.744/3.684]

89,4[3.52] Max

15,90/15,87[626/.625] Square

9,15/8,99[.360/.354]

5/8-18 UNF - 2B30,3/29,7 [1.19/1.17]Full Thread Depth

183,24/181,71[7.214/7.154]

MountingSurface

MountingSurface

MountingSurface

MountingSurface



2-5/8 Inch Straight

60 mm Tapered

30


Dimensions — ShaftsSeries VIS 45

Standard Mount

52,07 [2.050]Min. Full Spline

89,40 [3.520] MaxCoupling Engagement

69,85 [2.750] Dia. Flat Root Side Fit32 Tooth 12/24 DP 30° Involute SplinePer ANSI B92.1 - 1970

1/2-13 UNC - 2B25,4 [1.00] Full Thread Depth

Standard Mount

45,7 [1.80]Min. Full Spline

72,26/71,75[2.845/2.825]

74,42/72,90[2.930/2.870]

89,66/88,14[3.530/3.470]

70,0 [2.76] 22 Tooth3 Modulus Per Din 5480

M16 x 1.531,8 [1.25]Min. Full Thread

106,55/105,03[4.195/4.135]

MountingSurface

MountingSurface

70 mm 22 Tooth Splined

2-3/4 Inch 32 Tooth Splined

31


Dimensions — PortsSeries VIS 45

Port A

Side Ported Standard and Wheel Motor

Side Ported Bearingless Motor (8 Bolt)

Side Ported Bearingless Motor (4 Bolt)

Port B

90,9 [3.58]Max.(2) 45°

7,6/6,6 [.30/.26]

1 - 5/16-12 UNO-ring Ports (2)orG 1 (BSP) Ports (2)

X

9/16-18 UNC-2BO-ring Port Size -6orG 1/4 (BSP) CaseDrain Port

Y

46,0 [1.81]46,0 [1.81]

See Pages 26-28

Port BPort A

Port BPort A

Port BPort A

32


Shaft Side Load CapacitySeries VIS 45

Mounting Surface

0

0 [-1] [-2] [-3] [-4] [-5] [-6] [inch][6] [5] [4] [3] [2] [1]

-20 -40 -60 -80 -120-100 -140 -160 mm120 100140 80 60 40 200

[10000]

0

2000

4000

6000

8000

10000

12000

14000

16000

18000kg [lb]

[20000]

[30000]

[40000]

0

[10000]

0

2000

4000

6000

8000

10000

12000

14000

16000

18000kg [lb]

[20000]

[30000]

[40000]

Mounting Surface

0

0 [-1] [-2] [-3] [-4] [-5] [-6] [-7] [-8] [-9] [inch][3] [2] [1]

-20 -40 -60 -80 -120 -140-100 -160 -180 -200 -220 mm80 60 40 20

Standard Mount

Wheel Mount



50 1.23100 1.00200 .81300 .72400 .66500 .62600 .58700 .56800 .54



33


Product NumbersSeries VIS 45

SAE

ISODispl. cm3/r [in3/r] / Product NumberPort

SizeShaft

2-5/8 inch Straight

Mounting

Standard

157-0039


G 1 (BSP) (2)G 1/4 (BSP) Drain Port (1) 155-0034 -0035 -0036 -0037 -0038

60 mm Tapered G 1 (BSP) (2)G 1/4 (BSP) Drain Port (1) 155-0048 -0049 -0050 -0051 -0052

70 mm 22 Tooth Splined G 1 (BSP) (2)G 1/4 (BSP) Drain Port (1) 155-0061 -0062 -0063 -0064 -0065

2–3/4 inch 32 Tooth Splined G 1 (BSP) (2)G 1/4 (BSP) Drain Port (1) 155-0075 -0076 -0077 -0078 -0079

2-5/8 inch Straight

60 mm Tapered

Wheel



Bearingless (8 Bolt) G 1 (BSP) (2)G 1/4 (BSP) Drain Port (1) 157-0051 -0052 -0053 -0041 -0043

-0039

-0053

-0066

-0080

-0021

-0035

-0045

-0040

-0054

-0067

-0081

-0022

-0036

-0047

Bearingless (4 Bolt) G 1 (BSP) (2)G 1/4 (BSP) Drain Port (1) 157-0035 -0037 -0039 — — — —

803 [49.0] 636 [38.8] 572 [34.9] 520 [31.7] 991 [60.5] 1245 [76.0] 1557 [95.0]

Displ. cm3/r [in3/r] / Product NumberPortSizeShaft

2-5/8 inch Straight

Mounting

Standard

157-0038



60 mm Tapered 1-5/16-12 UNF O-ring (2)9/16-18 UNC Drain Port (1) 155-0041 -0042 -0043 -0044 -0045

70 mm 22 Tooth Splined 1-5/16-12 UNF O-ring (2)9/16-18 UNC Drain Port (1) 155-0055 -0056 -0014 -0057 -0058

2–3/4 inch 32 Tooth Splined 1-5/16-12 UNF O-ring (2)9/16-18 UNC Drain Port (1) 155-0068 -0069 -0070 -0071 -0072

2-5/8 inch Straight

60 mm Tapered

Wheel



Bearingless (8 Bolt) 1-5/16-12 UNF O-ring (2)9/16-18 UNC Drain Port (1) 157-0048 -0049 -0050 -0040 -0042

-0032

-0046

-0059

-0073

-0014

-0028

-0044

-0033

-0047

-0060

-0074

-0015

-0029

-0046

Bearingless (4 Bolt) 1-5/16-12 UNF O-ring (2)9/16-18 UNC Drain Port (1) 157-0034 -0036 -0038 — — — —

803 [49.0] 636 [38.8] 572 [34.9] 520 [31.7] 991 [60.5] 1245 [76.0] 1557 [95.0]



34


Model CodeSeries VIS 45

Position 9 Port TypeA .............. 1–5/16-12 UN-2B O-ring Ports, Accepts Fittings for

SAE J1926/1B .............. G 1 (BSP) Ports, Accepts Fittings with Elastomeric or

Deformable Metallic Sealing Member Per DIN 3852Position 10 Case Flow OptionsD .............. Shuttle Valve with Side Facing 9/16-18 UNF -2B O-ring

Case Drain Port, Accepts Fittings for SAE J1926/1Case Drain Required

F ............... High Return Pressure Shuttle Valve with Side Facing9/16-18 UNF-2B SAE O-ring Port Case Drain, CaseDrain Required

H .............. High Return Pressure Shuttle Valve with Side FacingG 1/4 (BSP) Port Case Drain, Case Drain Required

Position 11 Low Pressure Relief (Required for Closed LoopApplications)

0 ............... None1 ............... Set at 15,6 bar [220 PSI]2 ............... Set at 13,1 bar [190 PSI]3 ............... Set at 4,5 bar [ 65 PSI]Position 12,13 Special Features00 ............. NonePosition 14 Paint/Special Packaging0 ............... No Paint, Individual BoxA .............. Painted Low Gloss Black, Individual BoxB .............. No Paint, Bulk Box OptionC .............. Painted Low Gloss Black, Bulk Box OptionPosition 15 Eaton Assigned Code when Applicable0 ............... Assigned CodePosition 16 Eaton Assigned Design Code0 ............... Assigned Design Code

Position 1, 2, 3 Product SeriesACB ........... VIS 45 MotorPosition 4, 5 Displacement cm3/r [in3/r]32 ............. 520 [31.7]35 ............. 572 [34.9]39 ............. 636 [38.8]49 ............. 803 [49.0]60 ............. 991 [60.5]76 ............. 1245 [76.0]95 ............. 1557 [95.0]Position 6 Mounting TypeA .............. 4 Bolt (Bearingless) 158,70 [6.250] Pilot Dia. with

9,07 [.355] Pilot Length and 17,53 [.690] Dia. Holeson 190,50 [7.500] Dia.B.C. - Max. Torque Allowed3615 Nm [32000 lb-in](Displ. Code 32, 35, 39 Only)

C .............. 8 Bolt (Bearingless) 158,70 [6.250] Pilot Dia. with9,07 [.355] Pilot Length and 15,88 [.625] Dia. Holeson 190,50 [7.500] Dia.B.C.

D .............. 4 Bolt (Wheel) 200,0 [7.87] Pilot Dia. with 9,0 [.35]Pilot Length and 20,57 [.810] Dia. Holes on 250,0[9.84] Dia. B.C.

E ............... 4 Bolt (Standard) 200,0 [7.87] Pilot Dia. with 9,0[.35] Pilot Length and 20,57 [.810] Dia. Holes on250,0 [9.84] Dia. B.C.

Position 7, 8 Output Shaft00 ............. None (Bearingless)05 ............. 2–5/8 inch Dia. Straight Shaft with 5/8-18 UNF-2B

Thread in End and 15,88 [.625] Sq. x 81,3 [3.20]Straight Key

06 ............. 70.0 mm Dia. 22 Tooth 3 Modulus Splined Shaft PerDIN 5480 with M16 X 1,5 Thread in End

08 ............. 2–3/4 inch Dia. Flat Root Side Fit 32 Tooth 12/24 DP30 Deg. Involute Spline with 1/2-13 UNC-2B Thread inEnd

09 ............. 60,27 [2.373] Dia. 10:1 Tapered Shaft Per 150 R775with M42 x 3-6H Threaded Shaft End, 16W x 10H x32L [.630W x .394H x 1. 260L]

The following 16-digit coding system has been developed to identify all of the configuration options for the Series VIS 45 motor. Use this modelcode to specify a motor with the desired features. All 16-digits of the code must be present when ordering. You may want to photocopy thematrix below to ensure that each number is entered in the correct box.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

A C B 0 0

Model Code — VIS 45 Series Motors

35


Installation Information forBearingless Motor —Series VIS 30

45°±3°

Seal to be furnished with motor forproper oil circulation thru splines.

Similar to SAE “C” Four Bolt Flange.

Mating part to have critical dimensions as shown. Oil holes must be provided and open for properoil circulation.

Internal spline in mating part to be per spline data.Specification material to be ASTM A304, 8620Hcarborize to a hardness of 60-64 HRc with case depth (to 50HRc) of 0,076 - 1,02 [.030 - .040].Dimensions apply after heat treat.

Circular

Major

Spline Pitch — 8.5/17Pressure Angle — 30°Number of teeth — 12Class of Fit — Ref. 5Type of Fit — SidePitch Diameter — Ref. 35,858823 [1.4117647]Base Diameter — Ref. 31,054652 [1.2226241]Major Diameter — 39,17 [1.542] Max. 38,97 [1.534] Min. Minor Diameter — 33,30 - 33,48 [1.311 - 1.318]Form Diameter, Min. — 38,33 [1.509] Fillet Radius — 0,64 - 0,76 [.025 - .030]Tip Radius — 0,25 - 0,51 [.010 - .020]Finish — 1,6 [63]Involute Profile Variation — +0,000 -0,025 [+.0000 -.0010]Total Index Variation — 0,038 [.0015]Lead Variation — 0,013 [.0005]Circular Space Width: Maximum Actual — 5,898 [.2322] Minimum Effective — 5,804 [.2285] Maximum Effective — Ref. 5,857 [.2306] Minimum Actual — Ref. 5,834 [.2297]Dimension Between Two Pins — Ref. 26,929 - 27,084 [1.0602 - 1.0663]Pin Diameter — 6,223 [.2450] Pins to Have 4,0 [.160] Wide Flat forRoot Clearance

MinorTip R.

Fillet R.

Pitch

Form

Finish

Finish

2

22X

1

3

3

4

4

2540 [100]

66,45±0,25[2.616±.010]

39.88±0,25[1.570±.010]

55°±5°

49,84±0,25[1.962±.010]

45°±5° x 0,38±0,25 [.015±.010]or R 0,38±0,25 [.015±.010]

68,6±0,5[2.70±.02]Coupling Length

4,83±0,25[.190±.010] Oil Hole

-H-

31,0±0,25 [1.220±.010]

3,17 [.125] Max.Undercut

52,37[2.062]Min.

R 1,5±0,3[.06±.01]

R 1,5±0,3[.06±.01]

-G-

Oil Flow Path Thru Splineand Bearing(s)

Spline

Oil Flow Return to Case Drain

Case Drain

0,20 [.008] H

Eaton CorporationHydraulics Division15151 Hwy. 5Eden Prairie, MN 55344Telephone 612/937-9800Fax 612/937-7130

Eaton Ltd.Hydraulics DivisionGlenrothes, FifeScotland, KY7 4NWTelephone 01-592-771-771Fax 01-592-773-184

Eaton GmbHHydraulics ProductsAm Schimmersfeld 740880 Ratingen, GermanyTelephone 02102-406-830Fax 02102-406-800

ISO-9001 CERTIFICATED FIRMDET NORSKE VERITAS INDUSTRY BV, THE NETHERLANDS

ACCREDITED BYTHE DUTCH COUNCILFOR CERTIFICATION

Reg. No. 24

Quality System CertifiedProducts in this catalog are manufacturedin an ISO-9001-certified site.

http://www.eaton.com


Form No. 11-112

Copyright Eaton Corporation 1998All Rights ReservedPrinted in USA

Installation Information forBearingless Motor —Series VIS 45

1000,33 [.013] B

-B-

Seal to be furnished with motor forproper oil circulation thru splines.

Dimension indicated applies withinarea shown.

Mating part to have critical dimensions as shown. Oil holes must be provided and open for properoil circulation.

Internal spline in mating part to be per spline data.Specification material to be ASTM A304, 8620Hcarborize to a hardness of 59-62 HRc with case depth (to 50HRc) of 0,76 - 1,27 [.030 - .050].Dimensions apply after heat treat.

96,3[3.79]Min

10,2 [.40] Min.

4,83±0,25[.190±.010]Oil Hole55° ±5°

45° ±5° x 0,38±0,25 [.015±.010]or R 0,38±0,25 [R .015±.010]

57,15±0,25[2.250±.010]

R 1,52±0,25[.060±.010]

69,85[2.750]Min.

12,32±0,25[.485±.010]

88,77±0,76[3.495±.030]Coupling Depth

3,17 [.125] Max. Undercut

43,82 [1.725] Min.103,99±0,13[4.094±.005]

33,53±0,25[1.320±.010]

67,31±0,01[2.650±.010]

-E-

-A-

0,33 [.013] B

0,05 [.002] E

Circular

Major

Spline Pitch — 8/16Pressure Angle — 30°Number of teeth — 16Class of Fit — Ref. 5Type of Fit — SidePitch Diameter — Ref. 50,800000 [2.0000000]Base Diameter — Ref. 43,994090032 [1.7320508]Major Diameter — 56,34±0,15 [2.218±.006] Minor Diameter — 48.44± 0,08 [1.907±.003]Form Diameter, Min. — 55,22 [2.174] Fillet Radius — 1,02±0,25 [.040±.010]Tip Radius — 0,38±0,13 [.015±.005]Finish — 1,6 [63]Involute Profile Variation — +0,000 -0,025 [+.0000 -.0010]Total Index Variation — 0,041 [.0016]Lead Variation — 0,015 [.0006]Circular Space Width: Maximum Actual — 6,180 [.2433] Minimum Effective — 6,048 [.2381] Maximum Effective — Ref. 6,099 [.2401] Ninimum Actual — Ref. 6,114 [.2407]Dimension Between Two Pins — Ref. 42,659±0,05 [1.6795±.0020]Pin Diameter — 6,223 [.2450]

MinorTip R.

Fillet R.Pitch

Form

Finish

Finish

4

4

4

4

2

1

2

3

3

4

Oil Flow Path Thru SplineBearing(s)

Oil Flow Return to Case Drain

Spline

Case DrainR 1,52±0,25[.060±.010]

2X

Eaton VIS Motor

Documents

Transcript of Eaton VIS Motor