®EasyLift 600 PromoLine Permanent-electro magnetic fixed beam for thin sheets handling

• Light and compact• Safety factor 1:3• No maintenance

2 YEARS warranty

Fixed beam with permanent-electro magnetic modules.Expressly designed for typical handling requirements in carpentry, to serve cutting machines, in the distribution of steel and service centers.

To handle sheets of various sizes in total flexibility.Beam in tubular compact construction with onboard electronic unit. Activable by built-in pushbutton or with remote control (optional).

Safety through power

for thicknesses from 1,5 mm

600 kgcapacity

EasyLift

663

367

1030

2140

1000 1000 750

8502080

100

100

140

226

230

Peso indicativo = 170 Kg

65

1020 240

190

50980

65

Blocco di prova in "Fe" piano, Sp. min. 8 mm.

Curva Carico _ Forza / Traferro Easy Lift 600

Temperatura < 100°C

800

1000

1200

1400

1600

1800

co -

Load

[kgf

]

Aprile 2016 Proprietà diTECNOMAGNETE S.p.A.

easy-lift-600-2016-COMM (2).xlsx

0

200

400

600

0,5 0,75 1 1,25

Caric

Traferro - Air gap - T [mm]

Safery through power

HeadquartersTECNOMAGNETE spa20020 Lainate (MI) Italy, Via Nerviano 31Tel. +39 02 937 591, Fax +39 02 935 708 57e-mail: info@tecnomagnete.it

Subsidiaries:China Tecnomagnete Shanghai R.O.France Tecnomagnete S.A.R.L. Germany Tecnomagnete GmbHJapan Tecnomagnete LtdUSA Tecnomagnete Inc.

Distributor:

www.tecnomagnete.com

EASY

LIFT

- 05

16 E

NG

STANDARD SUPPLY- 6 permanent-electro magnetic modules

- Fixed beam with hanging chains and ring to the hook

for single pull

- Special joint system between magnets and crossbeams

- Electronic compact control unit XT200 with UCS

saturation control system

- MAG/DEMAG pushbuttons built-in

- DUTANAC anti-deactivation device

ON REQUEST:

- TC remote control with MAG / SAFE / DEMAG functions.

ModelEasyLift

Thickness mm

Min. width mm

Max. width mm

Min. lenght mm

Max. lenght mm

SWLkg

EasyLift 600 1,5 - 18 1000 2000 2000 3000 600

EasyLift is safe! It doesn’t require electrical supply during the handling of the load thus being unaffected by any power failure. No battery back up required. The high energy magnets grant constant and high concentrated force on the load with the best performances at indefinite period of time.

The Dautanac device allows magnetization / demagnetization only when EASYLIFT is on the ground, preventing any accidental deactivation during the handling.

Easy and practicalNo moving parts – No wearing – No heat generation – No energy consumption.The magnetization (MAG) and demagnetization (DEMAG) cycles are performed in a few seconds by a push button.No residual magnetism. Light weight: 170 kg only.

EasyLift is quick in payback!One operator can perform all operations. Optimization of the deposit area through picking up the load from the top, without using spacers. No load damage. No battery back up is required. No maintenance. No additional costs.

We reserve the right to bring up any modification connected with the technological development.

AIR-GAP (mm)

FORCE / AIR-GAP CURVE

FOR

CE

(kgf

)

DIMENSIONS (mm)

LOAD CHARACTERISTICS

New electronic control unit XT200 series. Compact and lighweight, is equipped with UCS saturation contold system and built-in digital push-buttons for MAG/DEMAG cycles.