Easy8051 v6 Development System

8/4/2019 Easy8051 v6 Development System

http://slidepdf.com/reader/full/easy8051-v6-development-system 1/4

Easy8051 v6 Development System

• USB 2.0 programmer on board!!!System is compatible with 14, 16, 20

and 40 pin microcontrollers (it comes with AT89S8253).

• USB 2.0 Programmer is supplied from the system and the programming can be

done without taking the microcontroller out.

• Many industrial applications can be tested on the system : temperature controllers,

counters, timers...

• Every pin is marked in order to make work easier.

• Each port can be set to PULL-UP or PULL-DOWN resistors depending on the

current needs.

• Also there are PLCC44 and PLCC32 sockets for 32 and44 pin MCUs.



RS-232 communication System can be easily Digital therm

with PC or another configured via clearly ometer for

microcontroller marked dip switches. Measuring

temperature

from -55Cto 125C

Support for Potentiometers is Power SupMicrocontrollers in available for testing ply select-DIP40 and DIP20 AD conversion and USB OR

Socket Comparators EXTERNAL

DAC-Digital-Analog Co All pins are connected 32 diodes for

nverter for testing DA to IDC connectors for displayingconversion further connecting states of all

pins oncontroller

Pull up or Pull down 32 buttons for program DIP SW

Port defining developing needs for ledsControl on

Or off

Very fast USB2.0 LCD 2*16 IN 8 bit

Programmer on modeboard



Overview

Easy8051V6 development system is a full-featured development board for the

Atmel' 8051microcontrollers. It was designed to allow students or

engineers to easily exercise and explore the capabilities of the 8051

microcontrollers. It allows the 8051 microcontroller to be interfacedwith external circuits to a broad range of the peripheral devices,

allowing the user to concentrate just on the software.

On a silkscreen there are marks beside every component. Thesemarks describe connection to microcontroller, operation modes, and

some other useful notes. As a result, need for additional schematics isminimized, because all information are already on the board..

Package contains:

• Easy8051V6 Development System.

• USB cable.

• Serial cable.

• Manual and CD with software.

LCD / GLCD not included in the setup.

Supported Microcontrollers

The Easy8051 v6 development system supports a wide range of 8051 microcontrollers. Newlyreleased 8051 microcontrollers will be supported by a new version of 8051flash software that isupdated regularly. Here is a list of microcontrollers supported by the Easy8051 v6 developmentsystem:

A T M E L 8 0 5 1 M I C R O C O N T R O L L E R F A M I L Y

AT89LP213 AT89LP214 AT89LP216 AT89LP428 AT89LP828

AT89LP2052 AT89LP4052 AT89S51 AT89S52 AT89S52E

AT89S53 AT89S2051 AT89S4051 AT89S8252 AT89S8253

Examples

Examples that come with this development system will show you how to connect the 8051

microcontroller to other peripheral components or devices and how to develop your prototypedevice easily. Each example contains a detailed description of the relevant program includingcomments. All these examples can be downloaded from this page as well.

• Demonstration of SPI communication with A/D converter.

• Keypad library routines example.

• Examples of One Wire communication - Interfacing the DS1820 temperature sensor.



• 7 segment display demonstration example.

• Demonstration of using Button Library.

• Example of writing text messages on LCD.

• Demonstration of the Port Expander library routines.

• Simple demonstration examples of UART module library.

• Graphic LCD library routines demonstration.

• LED Blinking and Led Curtain Example.

• Example of displaying text on COG Display.

Corporate Office:

Kailash Vaibhav, G-Wing, Park Site, Vikhroli (W),Mumbai i- 400 079. Tel. : 022 - 2518 1900 ( 16 lines )

Fax: 91 - 022 - 2518 1930 / 40 / 50E-mail: [email protected] URL : www.dynalogindia.com

Easy8051 v6 Development System

Documents

Transcript of Easy8051 v6 Development System