EASTON 2004 charts
description
Transcript of EASTON 2004 charts
LIGHTSPEED
SizeShaft
Weight
Shaft Weight @ 29"
Spine @ 28" Span
Stock Length
Super Nock1
CB Insert2 CB Point
RPS Point3
Broadhead Adapter
Ring4
Grains per Inch Grains
Deflection in Inches Inches Grains Grains Grains
O.D. Inches
Size (3 Grains)
500400340
6.537.418.16
189215237
0.5000.4000.340
323β4 33331β4
131313
212121
100/80100/80100/80
9β329β329β32
A/C/C -60A/C/C -60A/C/C -60
1 Super Nock factory installed.2 CB Inserts designed specifically for Epic, Excel and LightSpeed. Use ATA Standard 8-32 screw-in points. 3 Uses 9/32 ATA Standard Easton RPS points, field or blunt points. RPS Target Points available in 50-125 grains.4 Easton recommends using the Broadhead Adapter Ring when attaching o-ring design broadheads.
EXCEL
SizeShaft
Weight
Shaft Weight @ 29"
Spine @ 28" Span
Stock Length
Super Nock1
CB Insert2 CB Point
RPS Point3
Broadhead Adapter
Ring4
Grains per Inch Grains
Deflection in Inches Inches Grains Grains Grains
O.D. Inches
Size (3 Grains)
500400340
7.108.128.80
206235255
0.5000.4000.340
323β433331β4
131313
212121
100/80100/80100/80
9β329β329β32
A/C/C -60A/C/C -60A/C/C -60
1 Super Nock factory installed.2 CB Inserts designed specifically for Epic, Excel and LightSpeed. Use ATA Standard 8-32 screw-in points. 3 Uses 9/32 ATA Standard Easton RPS points, field or blunt points. RPS Target Points available in 50-125 grains.4 Easton recommends using the Broadhead Adapter Ring when attaching o-ring design broadheads.
Size
Shaft WeightShaft
Weight @ 29β
Spine @ 28β Span
Stock Length3
Conventional Nock Size4/9
UNI System5 Super UNI System5
NIBB Point
One-piece Bullet Point
RPS7 Insert Alum.
RPS Point SizeXX751 XX782 751/782 Bushing6 βGβ Nock Bushing
Super Nock
3D Super Nock
Grains per Inch GrainsDeflection in
inches Inches Inches Grains Grains Grains Grains Grains Grains8 Grains Grains Inches171618131816
9.03 7.86 9.27
βββ
262228269
0.8800.8740.756
293030
1β41β41β4
788
777
βββ
βββ
βββ
60 56 63
68β74
101412
17/649/329/32
191319162013
8.34 10.05 9.01
βββ
242291261
0.7330.6230.610
3131321β2
9β329β329β32
99
β
77
β
ββ5
ββ13
ββ12
64 72 68
β82β
171621
5/165/165/16
201620182020
10.56 12.28 13.49
βββ
306356391
0.5310.4640.426
32321β233
9β325β165β16
βββ
βββ
44
β
1313β
1212β
80 89 64
90ββ
201917
5/165/165/16
211321142115
9.30 9.86 10.75
β 9.94
β
270286312
0.5400.5100.461
321β2321β233
5β165β165β16
β(11)(11)
β77
777
131313
121212
7810
78 83
100100100
252525
5/165/165/16
211722122213
12.02β
9.83
12.13 8.84 9.92
349256285
0.4000.5050.460
33321β2331β2
5β16β
5β16
β(13)(13)
β77
799
131313
121212
97 10211
88
100100100
253130
5/1611/3211/32
221522162219
10.67 12.02 13.77
10.77 12.13 13.89
309349399
0.4200.3750.337
333334
5β165β16
11β32
βββ
βββ
998
131313
121212
95 98 107
100100β
302926
11/3211/3211/32
231223142315
β 10.67 11.67
9.48 10.76 11.77
275309338
0.4230.3900.340
33331β234
β11β3211β32
(15)(14)β
77
β
111011
131313
121212
9911
ββ
100100100
373437
11/3211/3211/32
231724132419
13.26 10.40 14.55
13.38 10.50
β
385302422
0.2970.3650.268
3434341β2
11β3211β3211β32
β(17)β
β7
β
111212
131313
121212
β 110
β
100100100
374037
11/3211/3211/32
251225142613
β 11.33
β
10.28 11.43 11.49
298329333
0.3210.3050.265
341β2341β2341β2
β11β32β
(20)(18)(22)
777
151417
131313
121212
10811
ββ
100100150
524858
11/3211/32
3/8
β Indicates not available1 XX75 Mossy Oak New Break-Up, Realtree Hardwoods Green, Quattro, Yukon, Platinum Plus, Camo Hunter, GameGetter,
GameGetter II, Legacy.2 XX78 Super Slam Select, Super Slam.3 Length is approximate stock shaft length for each size.4 Nock size for conventional swaged nock taper.5 UNIβUniversal Nock Installation System.6 Parenthesis indicates smaller size (βGβ Nock). UNI Bushing is available as an accessory, except Super Slam Select.7 RPS = Replaceable Point System with 8-32 ATA -Standard thread
8 NIBB point grain weights are Β±0.5 grain. All other components are Β±1 grain.9 Legacy, GameGetter and GameGetter II, are produced without reduced diameter taper and can also use the next largest
conventional nock size.10 2113 shafts use 2114 X7/XX75 NIBB points and 2114-2117 components.11 This NIBB point will provide approximately an 8% F.O.C. All other NIBB points are approximately 7% F.O.C.
F.O.C. is Front-of-Center balance position on the arrow shaft.Note: Shaft sizes 1716, 1813 and 1816 use A/C/C -60; sizes 1913 and 1916 use A/C/C -71 Broadhead Adapter Rings.
AXIS
SizeShaft
Weight
Shaft Weight @ 29"
Spine @ 28" Span
Stock Length
βXβ Nock1
H.I.T. Insert2
RPS Point3
Broadhead Adapter
Ring4
Grains per inch Grains
Deflection in inches Inches Grains Grains Grains
500400
8.108.95
235260
0.5000.400
31311β2
99
1616
17β6417β649
-18Axis 400
1 βXβ Nock comes loose in bag with nock installation tool.2 HIT inserts designed specifically for ST Axis. 3 Use ATA Standard RPS points. RPS Parabolic Target Points are available in 50-125 grains.4 Easton recommends using the Broadhead Adapter Ring when attaching o-ring design broadheads.
340300
9.5310.69
276310
0.3400.300
32321β2β2β
99
1616
9β9β9 32β32β9β9β9 32β32β
-39-49
SizeShaft
Weight
Shaft Weight @ 29β
Spine @ 28β Span
Stock Length
Point/ Insert Sizes
UNI1 System One-Piece Parabolic PointNIBB Point RPS Inserts4
RPS Point5
Broad- head
Adapter Ring6Bushing βGβ Nock2
Medium Wt. Light Wt.
Extra Light Wt.
Hyper Light Wt. Two Piece
8-32 Halfout
8-32 Alum.
Grains per Inch Grains
Deflection in Inches Inches Grains Grains Grains3 Grains3 Grains3 Grains3 Grains3 Grains3 Grains3 Grains
3L-183-18
3-493-60
7.477.82
8.839.45
217227
256274
0.6200.560
0.3900.340
3131
32321β2
-18-18
-49-60
33
67
77
77
100100
ββ
8282
100108
7070
8090
6060
7080
7070
8090
1616
ββ
ββ
911
17β6417β64
9β329β32
33
33
Sizes 2-00 through 3-04 are available for target. See page 35 for specifications.β Indicates not available.1 UNIβUniversal Nock Installation System2 Easton βGβ Nock is available in Opaque Black, White and Translucent Green, Orange and Red, and comes in .088"
and .098" string groove sizes.
3 NIBB Point grain weights are Β±0.5 grains; all other components are Β±1 grain.4 RPS = Replaceable Point System with 8-32 ATA Standard thread. 5 RPS Parabolic Target Points are available in 50-125 grains.6 Easton recommends using the Broadhead Adapter Ring when attaching o-ring design broadheads. Adapter ring size matches point insert size.
3-283-39
8.118.58
235249
0.5000.440
311β2311β2
-28-39
45
77
100100
8785
7070
6060
7070
1822
ββ
17β17β17 64β64β9β9β9 32β32β
33
3-71 9.92 288 0.300 33 -71 8 7 β 114 90 80 90 β 14 5β5β5 16β16β 3
SizeShaft
Weight
Shaft Weight @ 29β
Spine @ 28β Span
Stock Length
Super Nock1
CM Insert2
RPS Point3
Broadhead Adapter
Ring4
Grains per Inch Grains
Deflection in Inches Inches Grains Grains
O.D. Inches
Size (3 Grains)
460400340300
9.4510.2011.0411.64
274296320338
0.4600.4000.3400.300
311β232321β233
13131313
23232323
9β329β329β329β32
A/C/C -71A/C/C -71A/C/C -71A/C/C -71
1 Super Nock factory installed.2 CM Inserts designed specifically for camouflaged carbon and A/C arrows. Use ATA Standard 8-32 screw-in points. 3 Uses 9β32 ATA Standard Easton RPS points, field or blunt points. RPS points available in 50-125 grains.4 Easton recommends using the Broadhead Adapter Ring when attaching o-ring design broadheads.
A/C KINETIC
A/C/C HUNTING
SizeShaft
Weight
Shaft Weight @ 29"
Spine @ 28" Span
Stock Length
Super Nock1
CB Insert2 CB Point
RPS Point3
Broadhead Adapter
Ring4
Grains per Inch Grains
Deflection in Inches Inches Grains Grains Grains
O.D. Inches
Size (3 Grains)
500400
7.038.17
204237
0.5050.415
31311β2
1313
2121
100/80100/80
9β329β329
A/C/C -60A/C/C -60
1 Super Nock factory installed.2 CB Inserts designed specifically for Epic, Excel and LightSpeed. Use ATA Standard 8-32 screw-in points. 3 Uses 9/32 ATA Standard Easton RPS points, field or blunt points. RPS Target Points available in 50-125 grains.4 Easton recommends using the Broadhead Adapter Ring when attaching o-ring design broadheads.
340300
9.009.14
261265
0.3700.330
32321β2β2β
1313
2121
100/80100/80
9β9β9 32β32β9β9β9 32β32β
A/C/C -60A/C/C -60
C2 OBSESSION & HARDWOODS GREEN
SizeShaft
Weight
Shaft Weight @
29"Spine @ 28"
SpanStock
LengthSuper Nock1
CM Insert2
RPS Point3
Broadhead Adapter
Ring4
Grains per Inch Grains
Deflection in Inches Inches Grains Grains
O.D. Inches
Size (3 Grains)
500400
8.029.12
233264
0.5000.400
31311β2
1313
2323
9β329β32
A/C/C -71A/C/C -71
1 Super Nock factory installed.2 CM Inserts designed specifically for camouflaged carbon and A/C arrows. Use ATA Standard 8-32 screw-in points. 3 Uses 9/32 ATA Standard Easton RPS points, field or blunt points. RPS target points available in 50-125 grains.4 Easton recommends using the Broadhead Adapter Ring when attaching o-ring design broadheads.
340300
10.0110.14
290294
0.3400.300
32321β2β2β
1313
2323
9β9β9 32β32β9β9β9 32β32β
A/C/C -71A/C/C -71
C2 EPIC
Group H
SizeSpine @
28" Span Model Weight
Grs/InchWeight
@29"22152314211722163-49400410
0.4200.3900.4000.3750.3900.4000.410
SS, 75SS, 75SS, 75SS, 75A/C/C
CA, KINRdln
10.6710.6712.0212.028.83
CAWT7.60
309309348348256
CAWT220
COMPOUND BOW - Release AidCALCULATED PEAK BOW WEIGHT - Lbs.
CORRECT HUNTING ARROW LENGTH
RECURVE BOWFinger Release
ACTUAL PEAK BOW WEIGHT - Lbs.
MODERN LONGBOWFinger Release
ACTUAL PEAK BOW WEIGHT - Lbs.Medium Cam Single or Hard Cam Point Weight Point Weight Point Weight Point Weight
75(grains)65-85
100(grains)90-110
125(grains)115-135
150(grains)140-160
75(grains)65-85
100(grains)90-110
125(grains)115-135
150(grains)140-160
22.5
23"23.5
23.5
24"24.5
24.5
25"25.5
25.5
26"26.5
26.5
27"27.5
27.5
28"28.5
28.5
29"29.5
29.5
30"30.5
30.5
31"31.5
31.5
32"32.5
32.5
33"33.5
75(grains)65-85
100 (grains)90-110
125 (grains)115-135
150 (grains)140-160
75(grains)65-85
100(grains)90-110
125 (grains)115-135
150 (grains)140-160
A B B C C D E 41-46 38-43 35-40 32-37
A B B C C D E F 47-52 44-49 41-46 38-43
40-44 37-41 34-38 31-35 35-39 32-36 29-33 26-30 A B B C C D E F G H 35-39 32-36 29-33 26-30 53-58 50-55 47-52 44-49
45-49 42-46 39-43 36-40 40-44 37-41 34-38 31-35 A B B C C D E F G H I 40-44 37-41 34-38 31-35 59-64 56-61 53-58 50-55
50-54 47-51 44-48 41-45 45-49 42-46 39-43 36-40 B B C C D E F G H I J 45-49 42-46 39-43 36-40 65-70 62-67 59-64 56-61
55-59 52-56 49-53 46-50 50-54 47-51 44-48 41-45 B C C D E F G H I J J 50-54 47-51 44-48 41-45 71-76 68-73 65-70 62-67
60-64 57-61 54-58 51-55 55-59 52-56 49-53 46-50 C C D E F G H I J J K 55-59 52-56 49-53 46-50 77-82 74-79 71-76 68-73
65-69 62-66 59-63 56-60 60-64 57-61 54-58 51-55 C D E F G H I J J K L 60-64 57-61 54-58 51-55 83-88 80-85 77-82 74-79
70-75 67-72 64-69 61-66 65-69 62-66 59-63 56-60 D E F G H I J J K L L 65-69 62-66 59-63 56-60 89-94 86-91 83-88 80-85
76-81 73-78 70-75 67-72 70-75 67-72 64-69 61-66 E F G H I J J K L L L 70-75 67-72 64-69 61-66 95-100 92-97 89-94 86-91
82-87 79-84 76-81 73-78 76-81 73-78 70-75 67-72 F G H I J J K L L L 76-81 73-78 70-75 67-72 101-106 98-103 95-100 92-97
88-93 85-90 82-87 79-84 82-87 79-84 76-81 73-78 G H I J J K L L L 82-87 79-84 76-81 73-78 107-112 104-109 101-106 98-103
94-99 91-96 88-93 85-90 88-93 85-90 82-87 79-84 H I J J K L L L 88-93 85-90 82-87 79-84 113-118 110-115 107-112 104-109
Group A
SizeSpine @
28" Span Model Weight
Grs/InchWeight
@29"18131716780
0.8740.8800.780
7575
Rdln
7.869.036.30
228262183
Group B
SizeSpine @
28" Span Model Weight
Grs/InchWeight
@29"19131816690
0.7330.7560.690
7575
Rdln
8.349.276.27
242269182
Group C
SizeSpine @
28" Span Model Weight
Grs/InchWeight
@29"201319163L-18600
0.6100.6230.6200.600
7575
A/C/CRdln
9.0110.057.476.92
261291217201
Group D
SizeSpine @
28" Span Model Weight
Grs/InchWeight
@29"211320163-18500520
0.5400.5310.5600.5000.520
7575
A/C/CCA, KIN
Rdln
9.3010.567.82
CAWT7.09
270306227
CAWT206
Group E
SizeSpine @
28" Span Model Weight
Grs/InchWeight
@29"22122114211520183-28
500, 460520
0.5050.5100.4610.4640.500
0.500, 0.4600.520
SSSS, 75
7575
A/C/CCA, KIN
Rdln
8.849.86
10.7512.288.11
CAWT7.09
256286312356235
CAWT206
Group G
SizeSpine @
28" Span Model Weight
Grs/InchWeight
@29"23122215211720203-39400460
0.4230.4200.4000.4260.4400.4000.460
SSSS, 75SS, 75
75A/C/C
CA, KINRdln
9.4810.6712.0213.498.58
CAWT7.32
275309348391249
CAWT212
Group I
SizeSpine @
28" Span Model Weight
Grs/InchWeight
@29"24132314231522163-49400410
0.3650.3900.3400.3750.3900.4000.410
SS, 75SS, 75SS, 75SS, 75A/C/C
CA, KINRdln
10.4010.6711.6712.028.83
CAWT7.60
302309338348256
CAWT220
Group J
SizeSpine @
28" Span Model Weight
Grs/InchWeight
@29"25122413231522193-60340360
0.3210.3650.3400.3370.3400.3400.360
SSSS, 75SS, 75SS, 75A/C/C
CA, KINRdln
10.2810.4011.6713.779.45
CAWT8.31
298302338399274
CAWT241
Group K
SizeSpine @
28" Span Model Weight
Grs/InchWeight
@29"2512251423173-71300
0.3210.3050.2970.3000.300
SSSS, 75SS, 75A/C/C
CA, KIN
10.2811.3313.389.92
CAWT
298329388288
CAWT
Group F
SizeSpine @
28" Span Model Weight
Grs/InchWeight
@29"22122213211520183-28
500, 460520
0.5050.4600.4610.4640.500
0.500, 0.4600.520
SSSS, 75
7575
A/C/CCA, KIN
Rdln
8.849.83
10.7512.288.11
CAWT7.09
256285312356235
CAWT206
Group L
SizeSpine @
28" Span Model Weight
Grs/InchWeight
@29"25142613231724193-71300
0.3050.2650.2970.2680.3000.300
SS, 75SS
SS, 7575
A/C/CCA, KIN
11.3311.4913.2614.559.92
CAWT
329333385422288
CAWT
Carbon & Kinetic Shaft Weights (CAWT)
Size Spine Kinetic ST AxisHardwoods
Green HD Obsession Epic LightSpeed ExcelGrs/In @29" Grs/In @29" Grs/In @29" Grs/In @29" Grs/In @29" Grs/In @29" Grs/In @29"
500460400340300
0.5000.4600.4000.3400.300
9.4510.2011.0411.64
274296320338
8.10
8.959.53
10.69
235
260276310
8.02
9.1210.0110.14
233
264290294
8.02
9.1210.0110.14
233
264290294
7.03
8.179.009.14
204
237261265
6.53
7.418.16
189
215237
7.10
8.128.80
206
235255
1. Determining Correct Hunting Arrow LengthBows with cut-out window. The Correct Hunting Arrow Length for bows with a broadhead cut-out sight window (including bows with overdraws) is determined by drawing back an extra-long arrow to full draw and having someone mark the arrow one to two inches in front of where the arrow contacts the most forward portion of the arrow rest.
Bows without cut-out window. The Correct Hunting Arrow Length for bows without a cut-out sight window (which will not allow a fixed blade broadhead to be drawn past the back of the bow) at full draw, mark an extra-long arrow one to two inches in front of the handle.
Bow Draw Length Draw length is measured at full draw from the bottom of the nock groove to the back (far side) of the bow. Actual arrow length and draw length are only the same if the end of the arrow shaft is even with the back of the bow (far side) at full draw.
2. Determining Actual Peak Bow WeightβCompound BowsCompound bows must be measured at the peak bow weight as the bow is being drawn and not while letting the bow down.
The suggested shaft sizes in the charts were determined using a βStandardβ Setup which includes: β’ Use of a release aid. β’ Compound bow with brace height greater than 61β2".
If your setup differs from the βStandardβ Setup, use the Variables (following) to make adjustments to determine the Calculated Peak Bow Weight so the correct arrow size can be selected on the Chart.
Variables to the βStandardβ Setup for Compound Bows: β’ Finger release - Add 5 lbs. β’ Bows with brace heights less than 61β2" β Add 5 lbs.
Overdraw Compound BowsIf you are using an overdraw, make the variable calculations (if any), and then modify the Calculated Peak Bow Weight of your bow using the chart below.
Length of Overdraw
Bow Weight 1" 2" 3" 4" 5"
For 50#-70# Actual /Calculated Peak Bow Weight, 1# 3# 6# 9# 12#add to bow weightβ
3. Determining Actual Peak Bow WeightβRecurve and Modern Longbows
Your local archery pro shop is the best place to determine the actual draw weight of your bow. Actual Peak Bow Weight for recurve bows should be measured at your draw length.
Correct Hunting Arrow Length
1"-2" clearance(minimum)
Place where arrow contacts most forward portion of the arrow rest.Mark arrow here.
Belly of bow (face side)Back of bow (far side)
Belly of bow (face side)
Back of bow (far side)
Bottom of nock groove.
Mark arrow here. Note: Correct arrow length is measured from throat (string hole) of the nock to end of the shaft, not including point or insert.
Correct Hunting Arrow Length1"-2" clearance(minimum)
Bottom of nock groove.
Size β indicates suggested arrow size.Spine β spine of arrow size shown (static). See page 9 for correct Epic spine.CAWT β Refer to Carbon & Kinetic box (left) for specific model and weight.Color Designation for Aluminum Arrows β Within each box the aluminum arrows are color-coded.
= lightest and fastest. = medium weight offering good speed and durability.
= heavier weights for excellent durability and penetration.
= aluminum/carbon and carbon.
Note: Shaft Weight at 29" is shown on our Arrow Selection Charts. To determine weight at your shaft length, multiply your actual shaft length by the grains-per-inch (gpi), not including point, insert or UNI Bushing.SS XX78 Super Slam Select and Super Slam (7178-T9 alloy)75 XX75: Platinum Plus, Legacy, Camo Hunter, GameGetter, GameGetter II (7075-T9 alloy), Quattro and YukonA/C/C Aluminum/Carbon/CompositeRdln RedlineCA ST Axis, Realtree Hardwoods Green HD, Mossy Oak Obsession, Epic, LightSpeed, ExcelKIN KineticSuggested shaft sizes were determined using 100-grain points. See βVariablesβ on left side of page.
USING THE HUNTING ARROW SELECTION CHART1. Once you have determined your Correct Hunting Arrow Length and Calculated or Actual Peak
Bow Weight, you are ready to select your correct shaft size:1.A Compound bows. In the βCalculated Peak Bow Weightβ column (left-hand side of the CHART), select
the column with the type cam on your bow, then the column with the point weight you use. Then locate your Calculated Peak Bow Weight in that column.
1.B Recurve bows and Modern Longbows. In the βActual Peak Bow Weightβ column (right-hand side of the CHART), select the column with the bow type and then the point weight you use. Next, locate your Actual Peak Bow Weight in that column.
2. Move across that bow weight row horizontally to the column indicating your Correct Arrow Length. Note the letter in the box where your Calculated or Actual Peak Bow Weight row and
Correct Hunting Arrow Length column intersect. The βShaft Sizeβ box below the CHART with the same letter contains your recommended shaft sizes. Select a shaft from the CHART depending on the shaft material, shaft weight and type of shooting you will be doing. For larger game, you should use heavier shafts.
EASTON HUNTING ARROW SELECTION CHART
X10 PointsX10 Ballistic Tungsten
Break-offX10 Stainless Steel
Break-off
Grains Grains
100/110/120 90/100/110
X10 Pin Nock SystemX10 Pin Pin Nock
Grains Grains
8 2
Pin Nock Colors: Translucent Green, Red, Blue, Orange and Opaque Yellow.
A/C/E Insert and Point System 5-44 ThreadScrew-in Point Weight
#2-31gr. #3-36gr. #4-41gr. #5-46gr. #6-51gr.
Insert Weight Total Weight (grains)βInsert and Point
H - 39gr. 70 75 80 85 90
J - 49gr. 80 85 90 95 100
L - 59gr. 90 95 100 105 110
A/C/E Pin Nock System A/C/E NockA/C/E Pin Pin Nock βGβ Nock
Grains Grains Grains
8 2 7
Pin Nock Colors: Translucent Green, Red, Blue, Orange and Opaque Yellow.βGβ Nock Colors: Opaque Black, White and Translucent Green, Orange, Red.
A/C/E Points
One-piece Stainless Steel Break-off
Grains Grains
50 60/70/8080/90/100
100/110/120
X10
SizeShaft
Weight1
Shaft Weight @
29"Spine @ 28"
SpanStock
Length
Maximum Trim
Amount2
Recommended Point Weight
Range
Grains per Inch Grains
Deflection in Inches Inches Inches Grains
1000900830
600550500
5.275.756.16
7.027.477.80
153167179
204217226
1.0000.9000.830
0.6000.5500.500
2828 281β2
303132
No limitNo limitNo limit
4.53.54.0
90-10090-100 90-100
100-110100-110 100-110
1 Due to the pronounced barrel design of the X10, the grain weight-per-inch shown is an average weight-per-inch of a 29" shaft. Shaft weight is slightly heavier toward the larger diameter center and lighter toward the tapered ends. One inch of shaft cut from the point end typically weighs 6-7 grains.
2 Because of the pronounced barrel shape of the X10, Easton recommends that no more than these lengths be cut from the front of the shaft before point installation.
A/C/E
SizeShaft
Weight1
Shaft Weight @ 29"
Spine @ 28" Span
Stock Length
Maximum Trim
Amount3
Recommended Point Weight
Range
Grains per Inch Grains
Deflection in Inches Inches Inches Grains
14002
12502
11002
780720670
470430400
4.865.085.14
6.016.355.93
6.817.037.50
141147149
174184172
197204218
1.4001.2501.100
0.7800.7200.670
0.4700.4300.400
265β8265β8285β8
5
295β8295β8305β8
5
325β8325β8325β8
No limitNo limitNo limit
No limit6.0
No limit
6.55.54.0
50-6060-7070-80
80-9080-9080-90
90-100100-110100-110
1 Due to the barrel design of the A/C/E, the grain weight-per-inch shown is an average weight-per-inch of a 29β shaft. Shaft weight is slightly heavier toward the larger diameter center and lighter toward the tapered ends. One inch of shaft cut from the point end weighs 5-6 grains.
2 Available as a special order only. Replaced with -00 sizes in the A/C/C shaft series.3 Because of the pronounced barrel shape of the A/C/E, Easton recommends that no more than these lengths be
cut from the front of the shaft before point installation.
1000920850
5.705.835.70
165169165
1.0000.9200.850
285β8β8β285β8β8β285β8β8β
No limit9.5
No limit
70-8070-8070-80
620570520
6.116.306.65
177183193
0.6200.5700.520
305β8β8β315β8β8β315β8β8β
No limit10.04.5
90-10090-10090-100
370 7.91 229 0.370 325β8β8β 4.0 110-120
750700650
6.356.706.79
184194197
0.7500.7000.650
292929
3.53.53.5
90-100 90-100 90-100
450410380
8.108.488.87
235246257
0.4500.4100.380
331β2β2β333β4β4β333β4β4β
5.55.56.5
100-110 100-120100-120
Points
One-piece
Stainless Steel Break-off
(610-1000)
Navigator Stainless Steel Break-off(430-480-540)
Grains Grains Grains
5060/70/80
80/90/100100/110/120
100/110/120
A/C/E Insert and Point System 5-44 Thread (for use with Navigator sizes 610-1000)Point Weight #2-31gr. #3-36gr. #4-41gr. #5-46gr. #6-51gr.Insert Weight Total Weight (grains)βInsert and Point
H - 39gr. 70 75 80 85 90
J - 49gr. 80 85 90 95 100
L - 59gr. 90 95 100 105 110
A/C/E Pin Nock System A/C/E Nock
A/C/E or Navigator Pin1 Pin Nock βGβ Nock
Grains Grains Grains8 2 7
1 430, 480, 540 sizes use unique Navigator nock pin. All others use A/C/E nock pin.
Pin Nock Colors: Translucent Green, Red, Blue, Orange and Opaque Yellow.βGβ Nock Colors: Opaque Black, White and Translucent Green, Orange, Red.
A/C/C
SizeShaft
Weight
Shaft Weight @ 29β
Spine @ 28β Span
Stock Length
Point/ Insert Sizes
UNI1 System One-Piece Parabolic Point
NIBB Point
RPS Inserts
RPS Point4Bushing
βGβ Nock2
Heavy Wt.
Med. Wt.
Light Wt.
Extra Light Wt.
Hyper Light Wt.
8-32 Halfout
8-32 Alum.
Grains per Inch Grains
Deflection in Inches Inches Grains Grains Grains3 Grains3 Grains3 Grains3
O.D. Inches
2-003L-003-00
3L-043-04
3L-18
3-493-603-71
4.725.145.47
6.957.227.47
8.839.459.92
137149159
202209217
256274288
1.5001.3001.150
0.7500.6800.620
0.3900.3400.300
28281β2281β2
303031
32321β233
-00* -00* -00*
-04-04-18
-49-60-71
βββ
223
678
777
777
777
β*β*β*
100100β
βββ
50* 50* β*
8080
100
βββ
β* β* β*
707082
100108114
β* β* 50*
606070
809090
β* β* β*
505060
708080
βββ
ββ70
809090
βββ
ββ16
βββ
βββ
βββ
91114
βββ
ββ
17β64
9β9β9 329β325β16
βIndicates not available.* The A/C/C -00 sizes use the same size core tube as A/C/E shafts and can use all available
A/C/E points, inserts and nocks. 1 UNIβUniversal Nock Installation System.
2 Easton βGβ Nock is available in Opaque Black, White and Translucent Green, Orange, Red and comes in .088β and .098β string groove sizes.
3 NIBB Point grain weights are Β±0.5 grains; all other points are Β±1 grain.4 RPS Parabolic Target Points are available in 50-125 grains.
A/C NAVIGATOR
SizeShaft
Weight
Shaft Weight @ 29"
Spine @ 28" Span
Stock Length
Recommended Point Weight
RangeGrains per
Inch GrainsDeflection in Inches Inches Grains
1000880810
*480*430
5.135.505.80
7.988.42
149160168
231244
1.0000.8800.810
0.4800.430
29291β230
32321β2
70-8070-8080-90
100-110100-110
*Sizes use unique Navigator Point. All others use A/C/E Points.
710610
*540
6.296.877.39
182199214
0.7100.6100.540
301β2β2β31311β2β2β
80-9080-90
100
2L-042-04
3X-04
6.056.486.74
175188195
1.0200.9200.830
29291β2β2β291β2β2β
-04-04-04
222
777
100100100
808080
707070
606060
505050
βββ
βββ
βββ
βββ
3-183-283-39
7.828.118.58
227235249
0.5600.5000.440
31311β2β2β311β2β2β
-18-28-39
345
777
βββ
100100100
828785
707070
606060
707070
161822
βββ
17β17β17 64β64β17β17β17 64β64β9β9β9 32β32β9
FATBOY LIGHTSPEED
SizeShaft
Weight
Shaft Weight @ 29"
Spine @ 28" Span
Stock Length
Super Nock1
Super1 UNI
BushingRPS2
Insert
One-piece Point
RPS Point3
Grains per Inch Grains
Deflection in Inches Inches Grains Grains Grains Grains O.D. Inches
500400340
7.107.758.30
206225241
0.5000.4000.340
323β433331β4
131313
999
383838
80/10080/10080/100
11β3211β3211β32
1 Super UNI factory installed.2 RPS insert designed specifically for Fat Boy. Use ATA Standard 8-32 screw-in points.3 Uses 11/32 ATA Standard Easton RPS, field or blunt points.
SizeShaft
Weight
Shaft Weight @ 29"
Spine @ 28" Span
Stock Length
Super Nock1
CB Insert2 CB Point
RPS Point3
Grains per Inch Grains
Deflection in Inches Inches Grains Grains Grains O.D. Inches
500400340
6.537.418.16
189215237
0.5000.4000.340
323β4 33331β4
131313
212121
80/10080/10080/100
9β329β329β32
1 Super Nock factory installed.2 CB Inserts designed specifically for Epic, Excel and LightSpeed. Use ATA Standard 8-32 screw-in points. 3 Can use 9/32 ATA Standard Easton RPS points, field or blunt points.
VECTOR
REDLINE
SizeShaft
Weight
Shaft Weight @ 29β
Spine @ 28β Span
Stock Length
Point/ Insert Sizes
UNI1 System One-Piece Parabolic Point
NIBB Point
RPS Inserts3
RPS Point4
RedlineBushing βGβ Nock2 Heavy Wt. Med. Wt. Light Wt.
Extra Light Wt.
Hyper Light Wt.
8-32 Halfout 8-32 Alum.
Grains per Inch Grains
Deflection in Inches Inches Grains Grains Grains5 Grains5 Grains5 Grains5 Grains5 Grains5 Grains Grains O.D. Inches
1000900780
5.685.836.30
165169183
1.0000.9000.780
291β2291β230
-04-04-18
223
777
100100β
8080
100
707082
606070
505060
ββ70
ββ16
βββ
ββ
17β64690600520
6.276.927.09
182201206
0.6900.6000.520
301β231311β2
-18-28-49
346
777
βββ
100100β
8287
100
707080
606070
707080
1618β
ββ9
17β64 17β64 9β32
460410360
7.327.608.31
212220241
0.4600.4100.360
311β23232
-49-60-60
677
777
βββ
βββ
100108108
809090
708080
809090
βββ
91111
9β329β329β32
βIndicates not available.1 UNIβUniversal Nock Installation System.2 Easton βGβ Nock is available in Opaque Black, White and Translucent Green, Orange, Red and comes in .088β and .098β
string groove sizes.
3 RPS=Replaceable Point System with 8-32 ATA-Standard thread. 4 RPS Parabolic Target Points are available in 50-125 grains.5 NIBB Point grain weights are Β±0.5 grains; all other points are Β±1 grain.
SizeShaft
Weight
Shaft Weight @ 29"
Spine @ 28" Span
Stock Length
Recommended Point Weight
Range
Stainless Steel
Break-off Point
Pin NocksVector
Pin Pin
Nock
Grains per Inch Grains
Deflection in Inches Inches Grains Grains Grains Grains
1050920840
5.245.446.06
152158176
1.0500.9200.840
28281β4281β2
70-8070-8080-90
70/80/9070/80/90
80/90/100
777
222
770700640
6.266.386.87
182185199
0.7700.7000.640
291β2301β2303β4
80-90 80-90
90-100
80/90/100 80/90/100
90/100/110
778
222
580530480
7.067.567.78
205219226
0.5800.5300.480
311β2313β432
90-10090-100
100-110
90/100/11090/100/11090/100/110
888
222
Pin Nock Colors: Translucent Green, Red, Blue, Orange and Opaque White.
Size
Shaft WeightShaft
Weight @ 29"
Spine @ 28" Span
Stock Length3
Conventional Nock Size4/8
UNI System5 Super UNI System5
NIBB Point
One-piece Bullet Point
RPS7 Insert Alum.
RPS Point SizeXX751 X72 751 X72 Bushing9 βGβ Nock Bushing
Super Nock
3D Super Nock
Grains per Inch GrainsDeflection in
Inches Inches Inches Inches Grains Grains Grains Grains Grains Grains6 Grains6 Grains6 Grains121414131416
161216141616
1716181218131814
191319141916
201621122114
221423122314
25122613
5.93 5.94 7.15
ββ
8.36
9.03β
7.86
8.34β
10.05
10.56β
9.86
ββ
10.67
ββ
βββ
6.27 7.73
β
β 7.30
β8.57
β 9.28
β
β 8.42 9.94
10.41 9.48 10.76
10.28 11.49
172172207
182224242
262212228249
242269291
306244286
302275309
298333
2.5012.0361.684
1.2981.1531.079
0.8800.8790.8740.799
0.7330.6580.623
0.5310.5900.510
0.4250.4230.390
0.3210.265
262627
ββ281β2
29β30
31β31
32β321β2
ββ331β2
341β2β
βββ
2828β
1
β291β2β291β
β301β2β
1
β311β2321β2
3333331β2
341β2341β2
β7β327β32
ββ1β4
1β4β1β4
9β32β9β32
9β32β5β165
ββ
11β32 11
ββ
ββ2
655
7988
999
(10)
β(10)(11)(11)
(13)(15)(14)
(20)(22)
7β7
777
7777
777
β77
777
77
βββ
βββ
βββ
βββ
477
91110
1517
βββ
βββ
βββ
βββ
131313
131313
1313
βββ
βββ
βββ
βββ
121212
121212
1212
β β 46
10
55 10
51 56
10
60 67 10
5660
64 64 72
10
80 88 10
78
103 10
99 10
β
108 10
β
453552
ββ63
68ββ
ββ82
90100100
100100100
100150
βββ
βββ
10β14
17β16
202525
β3734
5258
βββ
βββ
17/64β
9/32
5/16β
5/165/16
5/165/165/165/16
β11/3211/3211/32
11/323/8
β Indicates not available1 XX75 Jazz, Platinum Plus.2 X7 Eclipse and Cobalt.3 Length is approximate stock shaft length for each size.4 Nock size for conventional swaged nock taper.5 UNIβUniversal Nock Installation System.6 NIBB point grain weights are Β±0.5 grain. All other components are Β±1 grain.
7 RPS = Replaceable Point System with 8-32 ATA-Standard thread.8 Jazz is produced without reduced diameter taper and can also use the next largest conventional nock size.9 Parenthesis indicates smaller (A/C/E Nock) UNI Bushing size is available as an accessory.
Except X7 Cobalt.10 This NIBB point will provide approximately an 8% F.O.C. All other NIBB points are approximately 7% F.O.C.
F.O.C. is Front-of-Center balance position on the arrow shaft.
151215141516
ββ
7.34
5.846.83β
169198213
1.5531.3791.403
ββ271β2β2β
2726β
ββ1β4β4β
553
777
βββ
βββ
βββ
4910
6110
48
ββ54
βββ
βββ
171217131714
β7.42β
6.70β8.07
194215234
1.0991.0440.963
β29β
281β2β2ββ29
β1β4β4ββ
777
777
βββ
βββ
βββ
6210
5456
βββ
βββ
βββ
181418161912
β9.27β
8.57β7.60
249269220
0.7990.7560.778
β30β
291β2β2ββ30
β1β4β4ββ9
889
777
βββ
βββ
βββ
60637010
β74β
β12β
β9/32β
201220132014
β9.01β
8.00β9.56
232261277
0.6800.6100.579
β321β2β2ββ
311β2β2ββ311β2β2β
β9β9β9 32β32ββ
(10)β(10)
7β7
555
131313
121212
8310
6871
βββ
2221β
5/165/16β
211522122213
10.75β
9.83
β8.849.92
312256285
0.4610.5050.460
33β331β2β2β
β321β2β2β331β2β2β
5β16β5β16
(11)(13)(13)
777
799
131313
121212
8310210
88
100100100
253130
5/1611/3211/32
231524122413
11.67β
10.40
11.779.65
10.50
338280302
0.3420.4000.365
34β34
1
343434
11β32β32β11β32β32β11β32β32β
β(17)(17)
β77
111212
131313
121212
β110110
100100100
374040
11/3211/3211/32
1. Determining Correct Target Arrow Length The Correct Arrow Length for any type bow (including bows with overdraws) is determined
by drawing an extra-long arrow to full draw and having someone mark the arrow one inch in front of where the arrow contacts the most forward portion of the arrow rest. You may also use an arrow-length check arrow from Easton.
2. Determining Actual Peak Bow Weight for Compound BowsCompound bows must be measured at the peak bow weight as the bow is being drawn and not while letting the bow down.
The suggested shaft sizes in the charts were determined using a βStandardβ Setup which includes:
β’ Use of a release aid. β’ Recommended or 75-100 grain arrow point weight. β’ Compound bow with brace height greater than 61β2β.
If your setup differs from the βStandardβ Setup, use the Variables (following) to make adjustments to determine the Calculated Peak Bow Weight so the correct arrow size can be selected on the Chart.
Variables to the βStandardβ Setup for Compound Bows:
β’ Finger release - Add 5 lbs. β’ Point weight over 100 grains β Add 3 lbs. for each 25 grains heavier than 100 grains. β’ Bows with brace heights less than 61β2β β Add 5 lbs.
Overdraw Compound BowsIf you are using an overdraw, make the variable calculations (if any), and then modify the Calculated Peak Bow Weight of your bow using the following chart. Length of Overdraw
Bow Weight 1β 2β 3β 4β 5β
For 50#-70# Actual /Calculated Peak Bow Weight, 1# 3# 6# 9# 12#add to bow weightβ
3. Determining Actual Peak Bow Weight for Recurve BowsYour local archery pro shop is the best place to determine the actual draw weight of your bow. Actual Peak Bow Weight for recurve bows should be measured at your draw length.
Bow Draw LengthDraw length is measured at full draw from the βbackβ (far side-see drawing) of the bow to the bottom of the nock groove. Actual arrow length and draw length are only the same if the end of the arrow shaft is even with the back of the bow at full draw.
Correct Target Arrow Length
Correct Target Arrow Length
1β clearance (minimum)
Mark arrow here. Bottom of nock groove.
Place where arrow contacts most forward portion of the arrow rest.
Belly of bow (face side)Back of bow (far side)
Note: Correct arrow length is measured from throat (string hole) of the nock to end of the shaft, not including point or insert.
* When two sizes are listed together, the weight listed is for the first shaft.
Group T4
Size Spine Model Weight
Grs/InchWeight
@29"*670β’720R*650β’700R*610β’710R
3L-043-04
*700β’770R690
1912201219131914
0.670β’0.7200.650β’0.7000.610β’0.710
0.7500.680
0.700β’0.7700.6900.7780.6800.7330.658
A/C/EX10Nav
A/C/CA/C/C VectorRdlnX7X775X7
5.936.796.876.957.226.386.277.608.008.349.28
172197199202209 185182220232242269
Group T5
Size Spine Model Weight
Grs/InchWt
@29"*620β’670R*600β’650R*540β’610R
3-04
*640β’700R690
2012201319141916
0.620β’0.6700.600β’0.6500.540β’0.610
0.680
0.640β’0.7000.690
0.6800.6100.6580.623
A/C/EX10Nav
A/C/C
VectorRdln
X775X775
6.117.027.397.22
6.266.27
8.009.019.28
10.05
177204214209
182182
232261269291
Group T6
Size Spine Model Weight
Grs/InchWeight
@29"*570β’620R*550β’600R*540β’610R
3L-18
*580β’640R600500500
2112201320141916
0.570β’0.6200.550β’0.6000.540β’0.610
0.620
0.580β’0.6400.6000.5000.5000.5900.6100.5790.623
A/C/EX10Nav
A/C/C
VectorRdlnLSpd
FBX775X775
6.307.477.397.47
7.066.926.537.108.429.019.56
10.05
183217214217
205201189206244261277291
Group T7
Size Spine Model Weight
Grs/InchWeight
@29"*520β’570R*500β’550R*540β’610R
3-183-28
*530β’580R520500500
221221142016
0.520β’0.5700.500β’0.5500.540β’0.610
0.5600.500
0.530β’0.5800.5200.5000.500
0.5050.5100.531
A/C/EX10Nav
A/C/CA/C/C VectorRdlnLSpd
FB
75X7, 75
75
6.657.807.397.828.11 7.567.096.537.10
8.849.94
10.56
193226214227235 219206189206
256288306
Group T8
Size Spine Model Weight
Grs/InchWeight
@29"*470β’520R*450β’500R*480β’540R
3-283-39
*480β’530R460500500
2212221321142115
0.470β’0.5200.450β’0.5000.480β’0.540
0.5000.440
0.480β’0.5300.4600.5000.5000.5050.4600.5100.461
A/C/EX10Nav
A/C/CA/C/C VectorRdlnLSpd
FBX7
X7, 75X7, 75
75
6.818.107.988.118.58 7.787.326.537.108.849.929.94
10.75
197235231235249226212189206256288288312
Group T9
Size Spine Model Weight
Grs/InchWeight
@29"*430β’470R*410β’450R*430β’480R
3-39
480460400400
2312221322142115
0.430β’0.4700.410β’0.4500.430β’0.480
0.440
0.4800.4600.4000.4000.4230.4600.4250.461
A/C/EX10Nav
A/C/C
VectorRdlnLSpd
FBX7
X7, 75X775
7.038.488.428.58
7.787.327.417.759.489.92
10.4110.75
204246244249
226212215225275288302312
Group T10
Size Spine Model Weight
Grs/InchWeight
@29"*400β’430R*380β’410R*430β’480R
3-393-49480410400400
2412241322142314
0.400β’0.4300.380β’0.4100.430β’0.480
0.4400.3900.4800.4100.4000.4000.4000.3650.4250.390
A/C/EX10Nav
A/C/CA/C/C VectorRdlnLSpd
FBX7
X7, 75X7
X7, 75
7.508.878.428.588.83 7.787.607.417.759.65
10.5010.4110.76
218257244249256 226220215225280304302312
Group T11
Size Spine Model Weight
Grs/InchWeight
@29"*370β’400R
380R
3-493-60
360400400
241323142315
0.370β’0.4000.380
0.3900.340
0.3600.4000.400
0.3650.3900.340
A/C/EX10
A/C/CA/C/C
RdlnLSpd
FB
X7, 75X7, 75X7, 75
7.918.87
8.839.45
8.317.417.75
10.5010.7611.67
229257
256274
241215225
304312338
Group T12
Size Spine Model Weight
Grs/InchWeight
@29"370R
3-603-71
360340340
25122613
0.370
0.3400.300
0.3600.3400.340
0.3210.265
A/C/E
A/C/CA/C/C
RdlnLSpd
FB
X7X7
7.91
9.459.92
8.318.168.30
10.2811.49
229
274288
241237241
298333
COMPOUND BOW - Release AidCalculated Peak Bow Weight - Lbs. Correct Arrow Length for Target β’ Field β’ 3D
RECURVE BOWBow Weight - Lbs.
Finger Release
Soft Cam
AMO up to 210 FPSIBO up to 260 FPS
Medium Cam
AMO 211-230 FPSIBO 261-290 FPS
Single or Hard Cam
AMO 231 FPS upIBO 291 FPS up
221β2(57.2 cm)
23"231β2
(59.7 cm)
231β2
(59.7 cm)
24"241β2
(62.2 cm)
241β2
(62.2 cm)
25"251β2
(64.8 cm)
251β2(64.8 cm)
26"261β2
(67.3 cm)
261β2
(67.3 cm)
27"271β2
(69.9 cm)
28"281β2
(72.4 cm)
281β2
(72.4 cm)
29"291β2
(75.0 cm)
291β2
(75.0 cm)
30"301β2
(77.5 cm)
301β2
(77.5 cm)
31"311β2
(80.0 cm)
311β2
(80.0 cm)
32"321β2
(82.5 cm)
29-35 lbs.(13.2-15.9 kg) T1 T2 T3 17-23 lbs.
(7.7-10.4 kg)35-40 lbs.(15.9-18.1 kg)
29-35 lbs.(13.2-15.9 kg) T1 T2 T3 T4 T5 24-29 lbs.
(10.9-13.2 kg)40-45 lbs.(18.1-20.4 kg)
35-40 lbs.(15.9-18.1 kg)
29-35 lbs.(13.2-15.9 kg) T1 T2 T3 T4 T5 T6 T7 30-35 lbs.
(13.6-15.9 kg)45-50 lbs.(20.4-22.7 kg)
40-45 lbs.(18.1-20.4 kg)
35-40 lbs.(15.9-18.1 kg) T1 T2 T3 T4 T5 T6 T7 T8 T9 36-40 lbs.
(16.3-18.1 kg)50-55 lbs.(22.7-24.9 kg)
45-50 lbs.(20.4-22.7 kg)
40-45 lbs.(18.1-20.4 kg) T1 T2 T3 T4 T5 T6 T7 T8 T9 T10 41-45 lbs.
(18.6-20.4 kg)55-60 lbs.(24.9-27.2 kg)
50-55 lbs.(22.7-24.9 kg)
45-50 lbs.(20.4-22.7 kg) T2 T3 T4 T5 T6 T7 T8 T9 T10 T11 46-50 lbs.
(20.9-22.7 kg)60-65 lbs.(27.2-29.5 kg)
55-60 lbs.(24.9-27.2 kg)
50-55 lbs.(22.7-24.9 kg) T3 T4 T5 T6 T7 T8 T9 T10 T11 T12 51-55 lbs.
(23.1-24.9 kg)65-70 lbs.(29.5-31.8 kg)
60-65 lbs.(27.2-29.5 kg)
55-60 lbs.(24.9-27.2 kg) T4 T5 T6 T7 T8 T9 T10 T11 T12 T13 56-60 lbs.
(25.4-27.2 kg)70-76 lbs.(31.8-34.5 kg)
65-70 lbs.(29.5-31.8 kg)
60-65 lbs.(27.2-29.5 kg) T5 T6 T7 T8 T9 T10 T11 T12 T13 T13 61-65 lbs.
(27.7-29.5 kg)76-82 lbs.(34.5-37.2 kg)
70-76 lbs.(31.8-34.5 kg)
65-70 lbs.(29.5-31.8 kg) T6 T7 T8 T9 T10 T11 T12 T13 T13 T14 66-70 lbs.
(29.9-31.8 kg)82-88 lbs.(37.2-39.9 kg)
76-82 lbs.(34.5-37.2 kg)
70-76 lbs.(31.8-34.5 kg) T7 T8 T9 T10 T11 T12 T13 T13 T14 71-76 lbs.
(32.2-34.5 kg)No X10 or A/C/E shafts suitable in shaded areas above.
Group T13
Size Spine Model Weight
Grs/InchWeight
@29"3-7125122613
0.3000.3210.265
A/C/CX7X7
9.9210.2811.49
288298333
Group T14
Size/Spine Model Weight
Grs/InchWeight
@29β
2613 0.265 X7 11.49 333
R The size recommendations for recurve bows are indicated with a letter βRβ next to the size.
Size Indicates suggested arrow sizeSpine Spine of arrow size shown (static)Model Designates arrow modelWeight Listed in grains per inch
A/C/E Aluminum/Carbon/ExtremeX10 X10 Shafts (Aluminum/Carbon) Nav Navigator (Aluminum/Carbon)A/C/C Aluminum/Carbon/CompositeVector VectorRdln RedlineLSpd LightSpeedFB FatBoyX7 X7 Eclipse and Cobalt (7178 alloy)75 XX75: Platinum Plus and Jazz (7075-T9 alloy)
Group Y3
Size Spine Model Weight
Grs/InchWeight
@29"14131416
2.0361.684
7575
5.947.15
172207
A/C/E Aluminum/Carbon/ExtremeX10 X10 Shafts (Aluminum/Carbon)Nav Navigator (Aluminum/Carbon)A/C/C Aluminum/Carbon/CompositeVector VectorRdln Redline Carbon CompositeX7 X7 Eclipse and Cobalt (7178 alloy)75 XX75: Platinum Plus and Jazz
(7075-T9 alloy)
Note: Shaft Weight at 29" is shown on our Shaft Selection Charts. To determine weight at your shaft length, multiply the grains-per-inch (gpi) by your actual shaft length not including point, insert or UNI Bushing.
Correct Arrow Length for Youth TargetRECURVE BOW
Bow Weight - Lbs.Finger Release
201β2(52.1 cm)
21"211β2
(54.6 cm)
211β2(54.6 cm)
22"221β2
(57.2 cm)
221β2(57.2 cm)
23"231β2
(59.7 cm)
231β2
(59.7 cm)
24"241β2
(62.2 cm)
241β2
(62.2 cm)
25"251β2
(64.8 cm)
251β2(64.8 cm)
26"261β2
(67.3 cm)
261β2
(67.3 cm)
27"271β2
(69.9 cm)
Y1 Y1 Y2 Y3 Y4 16-20 lbs.(7.3-9.1 kg)
Y1 Y1 Y2 Y3 Y4 Y5 20-24 lbs.(9.1-10.9 kg)
Y1 Y1 Y2 Y3 Y4 Y5 Y6 24-28 lbs.(10.9-12.7 kg)
Y1 Y2 Y3 Y4 Y5 Y6 Y7 28-32 lbs.(12.7-14.5 kg)
Y2 Y3 Y4 Y5 Y6 Y7 32-36 lbs.(14.5-16.3 kg)
Y3 Y4 Y5 Y6 Y7 36-40 lbs.(16.3-18.1 kg)
Group Y1
Size Spine Model Weight
Grs/InchWeight
@29"1214 2.501 75 5.93 172
Group Y2
Size Spine Model Weight
Grs/InchWeight
@29"1413 2.036 75 5.94 172
Group Y4
Size Spine Model Weight
Grs/InchWeight
@29"2-0015121416
1.5001.5531.684
A/C/CX775
4.725.847.15
137169207
Group Y5
Size Spine Model Weight
Grs/InchWeight
@29"125014003L-00151416121516
1.2501.4001.3001.3791.2981.403
A/C/EA/C/EA/C/C
X7X775
5.084.865.146.836.277.34
147141149198182213
Group Y6
Size Spine Model Weight
Grs/InchWeight
@29"12503-00161215161614
1.2501.1501.2981.4031.153
A/C/EA/C/C
X775X7
5.085.476.277.347.73
147159182213224
Group Y7
Size Spine Model Weight
Grs/InchWeight
@29"10001100100010003-0010501000171216141616
1.0001.1001.0001.0001.1501.0501.0001.0991.1531.079
A/C/EA/C/EX10Nav
A/C/CVectorRdlnX7X775
5.705.145.275.135.475.245.686.707.738.36
165149153149159152165194224242
1. Once you have determined your Correct Arrow Length and Calculated or Actual Peak Bow Weight, you are ready to select your correct shaft size:
1.1 Compound bows. In the βCalculated Peak Bow Weightβ column (left-hand side of the CHART) select the column with the type cam on your bow. Then locate your Calculated Peak Bow Weight in that column.
1.2 Recurve bows. In the βBow Weightβ column (right-hand side of the CHART) locate your Actual Peak Bow Weight at your draw length.
2. Move across that row horizontally to the column indicating your Correct Arrow Length. Note the letter in the box where your Calculated or Actual Peak Bow Weight row and Correct Arrow Length column intersect. The βSizeβ box below the CHART with the same letter and number contains your recommended arrow sizes. Select an arrow from the Chart depending on the shaft material, shaft weight and type of shooting you will be doing.
USING THE TARGET ARROW SELECTION CHART
Group T1
Size Spine Model Weight
Grs/InchWt
@29"*920β’1000R*900β’1000R*880β’1000R
2L-042-04
*920β’1050R900
1712171317141616
0.920β’1.0000.900β’1.0000.880β’1.000
1.0200.920
0.920β’1.0500.9001.0991.0440.9631.079
A/C/EX10Nav
A/C/CA/C/C VectorRdlnX775X775
5.835.755.506.056.48 5.445.836.707.428.078.36
169167160175188 158169194215234242
Group T2
Size Spine Model Weight
Grs/InchWeight
@29"*780β’850R*750β’830R*810β’880R
2-04
*770β’840R780
181217141716
0.780β’0.8500.750β’0.8300.810β’0.880
0.920
0.770β’0.8400.780
0.8790.9630.880
A/C/EX10Nav
A/C/C
VectorRdln
X7X775
6.016.355.806.48
6.266.30
7.308.079.03
174184168188
182183
212234262
Group T3
Size Spine Model Weight
Grs/InchWeight
@29"*720β’780R*700β’750R*710β’810R
3X-043L-04
*700β’770R780
1912181318141816
0.720β’0.7800.700β’0.7500.710β’0.810
0.8300.750
0.700β’0.7700.7800.7780.8740.7990.756
A/C/EX10Nav
A/C/CA/C/C VectorRdlnX775X775
6.356.706.296.746.95 6.386.307.607.868.579.27
184194182195202 185183220228248269
EASTON OUTDOOR & INDOOR TARGET β’ FIELD β’ 3-D ARROW SELECTION CHART