Earth Homes

GREENMAGICHOMES–OceanLaneDrive–KeyBiscayne-Florida-33149-USA

Ph:786-4938322-Email:[email protected]

GREENMAGICHOMESINTRODUCES

EGTE SOIL STABILIZING ENZYME

CODE : PFEEGMH2015 COLOR : GREENISH BROWN PERFORMANCE : 1 liter for 30 m3 (1,060 ft3) STORAGE: Keep closed in its container in a dark place to less than 20 celsius degrees and not exposed to the sun before being applied. HUMIDITY TOLERANCE: HIGH TOLERANCE TO UV RAYS: Before applied: LOW, after applied: HIGH TEMPERATURE TOLERANCE: Before applied: LOW, after applied: HIGH. PRICE: US$ 390 liter - FOB - USA

Description: EGTE Soil Stabilizing Enzyme is a revolutionary new building product, which when applied to earth, dramatically increases its tensile strength for creating solid and durable surfaces and structures. It improves the soil's resistance to ware and tear and impact use, making it an ideal alternative to concrete for use in foundations, roads, drive ways, patios, bricks and flooring. For best results, the clay content of the soil and plasticity index should be between 7 and 40 percent. This allows the existing pavement surface structure to be used as is, avoiding import and removal of material. Mix EGTE with water and soil, and compact into forms to create a solid structure, or spray over the existing ground cover to strengthen and improve the ground's tolerance and resistance to heat and humidity. Coat the surface with our PGTE Polymer Sealant for a waterproof finish.



One liter of EGTE Soil Stabilizing Enzyme mixed with 9 liters (2 gallons) of water will cover 30 cubic meters (1,060 cubic feet). Best of all, it costs only $390 per liter!

Application For Use On Roads:

Before beginning, ensure the terrain has a natural humidity (NH) below the optimum humidity for compaction (OHC). It is recommended to begin construction during the dry season to avoid rain during application.

You will need a reclaimer truck, motor grader and vibratory cylinder compactor. Prepare the road surface with the reclaimer truck according to the design. Mix the EGTE with water and apply to the ground to reach the optimum moisture for compaction. Apply the treated soil with the reclaimer truck, then level the soil with a motor grader. Proceed to compact to achieve the design density required. The road can be opened to traffic immediately. For added waterproofing, you can protect and improve the surface resistance and impermeability with our PGTE Polymer Sealant. The road can then be opened to traffic within 24 hours.



Equipment required: backhoe loader, motor grader, vibratory cylinder compactor and water tank truck. With a backhoe loader or motor grader dig the ground according to the depth of the design. Mix the EGTE Soil Stabilizing Enzyme with water and apply to the earth using the water tank truck, while stirring with the motor grader to achieve optimum moisture for compaction, ensuring correct homogeneity of the soil. Level the surface with motor grader and proceeded to compact to achieve the design density. The road can be opened to traffic immediately. For added waterproofing, you can protect and improve the surface resistance and impermeability with our coating polymer PGTE

PGTE application: Dilute PGTE with water to a 20% solution and apply with a water tank truck on the road ensuring at least 5 liters of PGTE per square meter (0.5 liters of PGTE per square foot) and allow to dry 24 hours before opening to traffic. (See the PGTE technical data sheet and application recommendations before applying).



EARTH BRICK PRODUCTION To begin with earth brick production it is necessary that soil has a natural humidity (NH) below the optimum humidity for compaction (OHC). The EGTE is mixed with water to moisten the soil and is applied according to the available equipment, either manually or by machining. Mix and combine the soil to achieve the optimum moisture for compaction, ensuring the homogeneity of the soil, then proceed to compact to achieve the design density. Earth brick is not water resistant, therefore it must be protected until its installation. After installed, apply a layer of our PGTE polymeric coating or any coating sealant available. Earth brick may take up to 21 to 30 days to dry naturally depending on the weather and where they are manufactured. We recommend allowing the bricks to cure under cover to keep them dry.



POLYMER PGTE

POLYMER PGTE CODE : PFEPGMH2015 COLOR : WHITE PERFORMANCE : 1 litre to 5 M2. (53.81 sq ft) STORAGE: Keep closed in its container in a dark place to less than 20 celsius degrees and not exposed to the sun before being applied. HUMIDITY TOLERANCE: HIGH TOLERANCE TO UV RAYS: Before applied: LOW, after applied: HIGH TEMPERATURE TOLERANCE: Before applied: LOW, After applied: HIGH PRICE: US$ 17 liter - FOB - USA.

Description: Sealant Polymer PGTE improves roads resistance to moisture and rainfall, making it ideal to protect roads structures and earth bricks. The use of PGTE requires the soil to be dry. It must be applied with a water tank truck to guarantee the homogeneity of the application. PGTE does not replace the layer but protects and improves the strength and impermeability of the road structure as a waterproof coating.



One liter of PGTE Polymer Sealant diluted with water to a 20% solution, will cover 5 square meters (53.8 square feet). It is a super value for only $17 per liter!

Application in Roads: To start the application, it is necessary that the ground is dry. You must dilute it in ratio of 1 litre of PGTE with 9 litres of water in a water tank truck, and apply it to ensure 2 liters of this solution mix per square meter (2 liters per 10.76 sq ft). You must wait 24 hours before opening to traffic.

Earth Bricks application procedure: Before applying PGTE it is necessary that the brick is dry and set in place. Earth brick is not water resistant, therefore it must be protected until its installation. Once installed, apply a layer of our PGTE coating polymer with a brush, roller or sprayer, and wait 24 hours to dry.



EARTH AND DESERT SAND HOMES You can also have beautiful earth or desert sand homes easily and quickly. Application for Green Magic Homes:

1. Mix our EGTE Soil Stabilizing Enzyme with earth or desert sand to construct the foundation as you would with concrete. Shovel or pour into the foundation forms laid with rebar as per instructions with minimum depth of 4.7 inches, to include all technical installations. Let set for 24 hours.

2. Apply PGTE sealant to cover the foundation. 3. Assemble and install Green Magic Homes shell structure, bolting to the rebar

in the foundation. 4. Coat entire exterior of structure following our instructions. 5. Cover with 12 to 15 inches of earth or desert sand and plants or use EGTE to

create a solid roof covering. … And that´s it! Just install windows and doors, build inside walls, paint interior walls, furnish and …. Move into your new earth house.

Earth Homes

Documents

Transcript of Earth Homes