Specification Writers' Style Guide Specification Writer's Style Guide
E4 style guide
7
E4 Off Air Identity Style Guide
Transcript of E4 style guide
E4Off Air IdentityStyle Guide
E4 Style Guide Contents
1) The Logo2) The Logo Position3) Colour4) E4 Font
1) The Logo
Where ever possible the E4 logo should be in the colour of purple and white, but when colour can't be used it can be black.The Splat Should always be purple, and the E4 should be white.It should never appear as grey.
Logo Size
The logo should always be the size of 8mm. There is no reproduction size limit.
8mm
2) The Positioning of The Logo
The logo should always appear on the bottom right of the screen no closer than 10mm away from the edge of the screen.
3) Colour
E4 uses purple as its pure as its core colour and black if the colour must appear mono.
No other variants of purple can be used for the logos.
4) E4 Font
E4 uses the font, 'Another Typewriter' and the E and the 4 must sit just touching each other. Here is an example of the correct font Correct:
E4Incorrect:
E 4or
EFour
