E200 Series - hyundai-wia.de · The CNC Turning Center E200 Series was developd by Hyundai Wia, a...

2014-03 002.001 ENG

Head Office & Factory153, Jeongdong-ro, Seongsan-gu, Changwon-si, Gyeongsangnam-do

Tel +82 55 280 9206, 9299 Fax +82 55 210 9804

www.wiamachine.co.kr

Overseas Sales Team16F, 37, Cheoldobangmulgwan-ro, Uiwang-si, Gyeonggi-do

Tel +82 31 593 8173

E200 SeriesHYUNDAI WIA CNC Turning Center

The CNC Turning Center E200 Series was developd by Hyundai Wia, a Korean manufacturer of traditional machine tools. The strength of its accumulated knowhow and state-of-the-art technology, is designed to maximize productivity by enhancing both technical performance and economic efficiency.

Technical Leader

6″ 8″ LM Box Standard TurnMill

Chuck GuideWay Turret

● ● ●

● ● ●

● ● ●

● ● ●

● ● ●

● ● ●

ITEM

E200A

E200C

E200MA

E200MC

E200PA

E200PC

High Speed, High Rigidity and High Productivity- The next generation affordable CNC Lathe

E200 Series● 45° slanted one-piece high rigidity bed structure

● Least heat distortion, the most stabilized unit structure

● Able to extend, and high productive machine structure

● Unbeatable rapid travel speed : 36m/min (E200A/MA/C/MC)

● The most reliable high speed servo turret is adopted: 0.1sec/step

● Application of a Box Guide to handle heavy cutting (E200PA/PC)

● Compact design, able to install within a narrow space.

● Ergonomic design allows convenient access to chuck and tool

01 Basic FeaturesThe Best Productivity Popular 6 inch / 8 inch Compact CNC Turning CenterE200 Series

Main SpindleThe main spindle is designed in such a way that heat is blocked by the integrated base in bilateral symmetry and the insulating panel, making it possible to maintain a high degree of accuracy even during a long period of operation.

TurretWith installing high speed servo turret of 12 angles, tool split speed is increased (0.12sec/1step) and its cycle time is reduced, which improves productivity.

Ball ScrewThe Ball screw is fixed by a double anchor type, which places it in parallel with guide way and achieves a stable forwarding. Importantly, a ball screw with larger diameter is adopted and prepressure is applied, which improves thermal deformation and hardness.

High precision, High Rigidity All in One StructureA 45 degree slope type bed is combined with square type and tube type rib structure, which maintains a high rigidity. As absorption capablilty for vibration is good, powerful cutting and high precision maintaining is allowed.

01

04

0302

LM Guide(E200A/MA/C/MC)

Box Guide(E200PA/PC)

GuidewayAll axis of E200A/C have LM Guide installed, which has better speed and responsiveness.

This reduces non-cutting time and achieves 36m/min of quick forwarding, which increases productivity.

E200PA/PC designed for heavy duct cutting has Box Guides at all axis, which presents a stable processing capability even under heavy load.

◉ Rapid Travel (X/Z axis)

E200A | E200C | E200MA | E200MC : 36/36 m/min E200PA | E200PC : 24/24 m/min

◉ Travel(X/Z axis)

E200A | E200C : 210/330mm E200MA | E200MC : 210/286mm E200PA | E200PC : 210/310mm

Reductionofnon-cuttingtimebyrapidspeed

04+

05

E2

00 S

ERIE

SC

nC

Tu

rn

ing

Cen

Ter

HYu

nD

Ai W

iAM

ACH

ine

TOO

L

Basic Features

01

02

04

03

02 High-Precision SpindleLong Lasting High Accuracy & Excellent PerformanceCNC Turning CenterE200 Series

Main SpindleThe spindle has wide span of nominal production and the same axis structure as that of a high precision lathe, which is designed to minimize thermal deformation and make high precision cutting even with high speed and repeated cutting. By enlarging the spindle diameter and thickness its hardness is increased. Especially, its design adopting high precision angular ball bearing reduces noise and increases accuracy.

Tail StockMade it possible to process cutting stably by adopting 80mm movable tailstock as an option and it also provides excellent quality.

Taper : MT4Quill Dia. : Ø65 Travel : 80 mm

0.001° C-Axis ControlC axis with BZ-Sensor attached performs 0.001°(Command) split angle and position control with 100 rpm, which is capable of high value added contour control using rotating tools.

Spindle

15kW (15min)

Spindle Speed (r/min) Spindle Speed (r/min)


95.6N.m (15min)95.6 62

45.5

167

92

52.552.5N.m(Cont.)

62N.m (30min)

45.5N.m(Cont.)

11kW (Cont.)

6,000

1,143 2,570

2,000 3,0001,500

15kW (30min)

E200C/PC

167N.m (30min)

Power(kW) Torque(N.m) E200MCPower(kW) Torque(N.m)

E200A/PAPower(kW) Torque(N.m) E200MAPower(kW) Torque(N.m)

92N.m(Cont.)

11kW (Cont.)

11kW (30min)

105N.m (30min)

71.6N.m(Cont.)

7.5kW (Cont.)

7.5kW (30min)

5.5kW (Cont.)

Spindle Speed (r/min)

75.6

10.8

968.7

1,500500 4,500 6,000

E200A/PAPower(kW) Torque(N.m)

10.8kW (S6 60%)

9kW (Cont.)75.6N.m (S6 60%)

68.7N.m (Cont.)


132.310.8

9110.3

857286 2,571 4,000

E200C/PCPower(kW) Torque(N.m)

10.8kW (S6 60%)

9kW (Cont.)

132.3N.m (S6 60%)

110.3N.m (Cont.)

15kW (15min)



95.6N.m (15min)95.6 62

45.5

167

92

52.552.5N.m(Cont.)

62N.m (30min)

45.5N.m(Cont.)

11kW (Cont.)

6,000

1,143 2,570

2,000 3,0001,500

15kW (30min)

E200C/PC

167N.m (30min)

Power(kW) Torque(N.m) E200MCPower(kW) Torque(N.m)

E200A/PAPower(kW) Torque(N.m) E200MAPower(kW) Torque(N.m)

92N.m(Cont.)

11kW (Cont.)

11kW (30min)

105N.m (30min)

71.6N.m(Cont.)

7.5kW (Cont.)

7.5kW (30min)

5.5kW (Cont.)


75.6

10.8

968.7

1,500500 4,500 6,000

E200A/PAPower(kW) Torque(N.m)

10.8kW (S6 60%)

9kW (Cont.)75.6N.m (S6 60%)

68.7N.m (Cont.)


132.310.8

9110.3

857286 2,571 4,000

E200C/PCPower(kW) Torque(N.m)

10.8kW (S6 60%)

9kW (Cont.)

132.3N.m (S6 60%)

110.3N.m (Cont.)

The characteristics of 1PH8 Series Motors include a maximum concentricity of 10㎛, unsurpassed quality and a short operating period, which make them stand out as superb machine tools in quality and performance.

1PH8SpindleMotor

FANUC06+

07

E2

00 S

ERIE

SC

nC

Tu

rn

ing

Cen

Ter

HYu

nD

Ai W

iAM

ACH

ine

TOO

L

03 Servo TurretHigh speed, High Accuracy, Highly Reliable Servo Turret E200 Series

TurretThe E200 Series has a high performance AC servo motor and 3-piece coupling attached which enhances its process reliability. Powerful tool clamping using hydraulics minimizes tool tip deviation due to load, which displays excellent performance during heavy duty cutting.

◉ Number of Tools : 12EA

◉ Tool Size (O.D/I.D)

□20 / Ø32◉ Indexing Time :0.12sec/step


◉ Tool Size (O.D/I.D)

□25 / Ø40◉ Indexing Time :0.12sec/step

E200A | PA

E200C | PC


◉ Tool Size (O.D/I.D) □20/ Ø32◉ Indexing Time :0.23sec/step

E200MA | MC

08+

09

E2

00 S

ERIE

SC

nC

Tu

rn

ing

Cen

Ter

HYu

nD

Ai W

iAM

ACH

ine

TOO

L

Turret

Mill Tool HolderLive milling tools may utilize an ER collet adapter, allowing both faces to be fixed. This provides increased accuracy and repeatability.

VDI type enables exchange of tools and reduction of its time, which facilitate tooling.

◉ Output (Max./Cont.) : 7.6 / 3 kW

◉ Speed : 4,500rpm

◉ Collet size :Ø16 (ER25)◉ Type :VDI30

Mill Turret (VDI)

U-Drill

Collet & Cap

Endmill

Endmill

Drill

Tap

Drill

Tap

Face Cutter

Angular Milling HeadStraight Milling Head

04 Machining CapabilityExcellent Performance, High Accuracy CuttingCNC Turning CenterE200 Series

10+

11

E2

00 S

ERIE

SC

nC

Tu

rn

ing

Cen

Ter

HYu

nD

Ai W

iAM

ACH

ine

TOO

L

Machining

O.D Cutting

Face Cutting

Drilling

End Milling

I.D Cutting

O.D Hole Drilling

I.D Threading

Ball-End Milling

❖ The above result might be different by types of processing circumstance

Machining Variation

Sample Workpiece

E200A

Processing diameterSide cutting depthCutting speedSpindle rpmForwarding speedChip discharge

Ø424 mm198 m/min1,500 r/min0.45 mm/rev356 cc/min

Work diameterDrill diameterCutting speedSpindle rpmForwarding speedChip discharge

Ø70Ø37 mm104 m/min895 r/min0.4 mm/rev385 cc/min

DrillingCutting (O.D)

〈Material〈JIS〉:S45C(Carbon steel〉〈Material〈JIS〉:S45C(Carbon steel〉

E200MA

Processing depthDrill diameterCutting speedSpindle rpmForwarding speedChip discharge

15 mmØ12 mm36 m/min960 r/min0.5 mm/rev17 cc/min

Processing depthTap spec / pitchCutting speedSpindle rpmForwarding speed

20 mmM12/1.758 m/min212 r/min1.75 mm/rev

Drilling Tapping

〈Material〈JIS〉:S45C(Carbon steel〉

Processing depthDrill diameterCutting speedSpindle rpmForwarding speedChip discharge

15 mmØ12 mm162 m/min995 r/min0.4 mm/rev180 cc/min

Processing depthTap spec / pitchCutting speedSpindle rpmForwarding speed

20 mmM12/1.758 m/min121 r/min1.75 mm/rev

X-Axis Drilling Tapping


〈Material〈JIS〉:S45C(Carbon steel〉

Processing diameterSide cutting depthCutting speedSpindle rpmForwarding speedChip discharge

Ø523 mm162 m/min995 r/min0.4 mm/rev180 cc/min

Work diameterDrill diameterCutting speedSpindle rpmForwarding speedChip discharge

Ø50Ø22 mm28 m/min400 r/min0.4 mm/rev61 cc/min

DrillingCutting (O.D)


HYUNDAI WIA Smart System

for CNC

Turning Center

Monitoring Functions Energy Saving

Easy Programming

HW-MMS | HW-TMHW-ESS

HW-DPRO T/TM | HW-eDNC

User Friendly

Faster processing programming and enhanced processing accuracy are possible through HYUNDAI WIA Smart System. It also maximizes productivity through equipment monitoring and environment-friendly software.

USB Port (Standard)Convenience is increased when inputting and outputting program. Because it is now capable of using USB port in addition to current way like CF memory card or LAN

05 Smart SystemSoftware for smart operating and machiningE200 Series

HW-TM(HYUNDAIWIA–ToolMonitoring)This is an equipment-monitoring software which checks the overload, attrition and possible damage of equipment by analyzing the spindles and the output load of the feed shaft generated during a processing operation.

HW-DPRO T/TM(HYUNDAIWIA–DialoguePROgramTurn/TurnMill)Using a dialogue method, this software makes it easy to work out a program for a lathe processing operation with complicated configurations. (Can be installed on a PC.)

HW-MMS(HYUNDAIWIA–MachineMonitoringSystem)

This software is for remote control monitoring of equipment status (mobile, PC.) It checks and manages the state of multiple pieces of equipment and the progress of processing on a real time basis.

HW-eDNC(HYUNDAIWIA–EthernetDirectNumericalControl)This software transmits and receives the CNC of processing equipment, the processing program and the NC data on a PC through the internet or serial communications, while managing the processing program of the CNC memory.

HW-ESS(HYUNDAIWIA–EnergySavingSystem)This is an environment-friendly power reduction software reducing the standby power unnecessarily wasted in the equipment waiting for a processing operation.

HYUNDAI WIA Smart System

12+

13

E2

00 S

ERIE

SC

nC

Tu

rn

ing

Cen

Ter

HYu

nD

Ai W

iAM

ACH

ine

TOO

L

DIFFERENTIATED CAPABILITIES, INTEGRATED ENGINEERING PERFECTLY INTERLINKEDSIEMENS 828D is a latest model CNC that is capable of installing a maximum of 6 spindles. It is designed for horizontal/vertical all-purpose equipment.

Through a 80-bit control, it makes possible reduction of processing time and enhancement of productivity. It supports the preparation of a variety of programs and setup functions. It is easy to handle.

• Dialogue-type programming, simple and convenient

• Effective specifications for small quantity batch production

• Step-by-step operation possible without knowledge of the DIN/ISO code

Shop Turn

• 3-dimensional (3D) confirmation (an option) of the completed processing configuration of the NC program is possible.

• Offers standards for 2-dimensional simulation (2D.)

• Possible to confirm the simulation of the NC grogram during processing.

3D Simulation

• Easy to install/uninstall an option (Example: barfeeder and chip conveyor, etc.)

• Possible to install in one motion without revision of individual perimeters.

• A spate list is unnecessary as option items are indicated with letters.

Easy Extend

Easy input/output of a program is possible as a USB memory card, a CF memory card and LAN can all be used.

RJ 45 Ethernet

USB 2.0

Compact Flash Card

Variable Communication Port

If the ISO Dialect (G291) is ordered, JIS-based G-code programs can be used. (Standard)

SIEMENS Technology SIEMENS Communication Function

ISO CodeProgramming

SIEMENS Convenience Function SIEMENS Easy Programming

• Easy calculation (automatic and manual) of the offset values of the installed equipment

• Automatic input of the measured offset values of equipment into the equipment list

Easy Tool Measuring

• Supports the function of work offset calculation

• Automatic application of the measured work offset value as the activated work offset

Work Offset Measuring

• Real time monitoring of PLC programs is possible. Supports the “search” and “cross reference” functions.

• Real time verification of NC variables and PLC interface

• Input/change of the values of variables

Real Time PLC Monitoring

• Program can be re-started from a particular location without editing the processing program.

• Provides safety to the user.

Block Searching

• A maximum of 500 alarms can be stored. • The entire alarm log can be stored as a

data file in the NC • The overall alarm history can be checked

through the alarm log.

Alarm Log

•Useofcycleprogramminimizesprogramcapacity.•Whencyclevariablesareinput,graphicimagesareprovided.•Toolpathandsimulationofcompletedcycleprogramareavailable.•Variousconfigurationscanbeprocessedusingcycles.

•Letterscanbeprocessedonproductsbyestablishingaplaneandinputtingletters.•Lettersize/angle/location/directioncanbedesignated.•CapitalandsmalllettersofEnglishcanbeprocessed.

Program Guide SimpleProgram,HighProductivity

Engraving CycleSimpleLetterProcessingisPossible.

Controller

14+

15

E2

00 S

ERIE

SC

nC

Tu

rn

ing

Cen

Ter

HYu

nD

Ai W

iAM

ACH

ine

TOO

L

06 User ConvenienceVarious Devices for User Friendly

E200 Series

Parts ConveyorAn optional parts catcher collects finished parts without the need to open the door, adding productivity, especially when a bar feeder is attached

Long Type 3m (118.1″)Max load processing capa. Ø42 (1.7″)Shot Type 1.5m (59.1″)Max load processing capa. Ø65 (2.6″)

Bar Feeder System

Bar Feeder When machining from bar stock, a bar feeder allows forimproved efficiency and unattended machining

RoundBarMaterial

Bar Feeder Machining Parts Catcher Parts Conveyor

Bar Feeder Machining Process

E2

00 S

ERIE

SC

nC

Tu

rn

ing

Cen

Ter

HYu

nD

Ai W

iAM

ACH

ine

TOO

L

Optional

16+

17

Gantry Loader System

Raw Material In Work Stocker 1st Machining

Finishing Out Work Stocker 2nd Machining

Construction of high speed gantry loaders is possible as well as the construction of flexible automation cells by a work stocker. Optimization of the installation space is also possible. In particular, excellent machining effect is achieved during continuous machining of both sides of the same or different work

Gantry Loader Machining Process

Turn Over

Standard & Optional

Main SpindleHollow Chuck 3 JawMain SpindleSolid Chuck 3 JawStandard Soft Jaw (1set)Chuck Clamp Foot Switch2 Steps Hyd, Pressure DeviceSpindle Inside Stopper5° IndexCs-Axis (0.001°)Chuck Open/Close Confirmation Device2 Steps Chuck Foot SwitchTurretTool HolderMill TurretStraight Milling Head (Axial)Angular Milling Head (Radial)Straight Milling Head (Axial)Angular Milling Head (Radial)Boring SleeveDrill SocketU-Drill HolderU-Drill Holder SleeveO.D Extension HolderSwivel HeadTail Stock & Steady RestQuill Type Tail StockProgramable Tail StockManual Type Hyd. Steady RestStandard Live Center (Tail Stock : Standard)High Precesion Live Center2 Steps Tail Stock Pressure SystemQuill Forward/Reverse Confirmation DeviceTail Stock Foot SwitchCoolant & Air BlowStandard Coolant (Nozzle)Chuck Coolant (Upper Chuck)Gun CoolantSpindle Thru Coolant (Only for Special Chuck)Thru Coolant for Live ToolChuck Air Blow (Upper Chuck)Tail Stock Air Blow (Upper Tail Stock)Turret Air BlowAir GunSpindle Thru Air Blow (Only for Special Chuck)High Pressure CoolantPower Coolant System (For Automation)Coolant ChillerChip DisposalCoolant TankChip Conveyor(Hinge/Scraper)Special Chip Conveyor (Drum Filter)

Chip Wagon

Safety DeviceDoor Inter-LockTotal Splash GuardChuck Pressure Failure DetectorBack Spin Torque Limiter (BST)Torque Limiter

6″8″6″8″

AxiallCollet Type,1eaCollet Type,1eaAdapter TypeAdapter Type

For Out-Dia

6Bar

135ℓFront(Right)Front(Left)

Standard(180ℓ)Swing(200ℓ)Swing Large Size(290ℓ)Large Size(330ℓ)Costomized

Spindle & Chuck Electric Device

● : Standard ○ : Option ☆ : Prior Consultation - Non Application

E200A/PA E200MA ● ● ○ ○ ○ ○ ☆ ☆ ● ● ● ● ○ ○ ☆ ☆ ☆ - - ● ● ● ○ ○ ● ● - ● - ● - ● - ☆ - ☆ ● ● ● - ○ ○ ○ ○ ☆ - - ○ ○ ○ - - - - ○ ○ ○ ○ ☆ ☆ ○ ○ ☆ ☆ ● ● ○ ○ ○ ○ ☆ ☆ - - ○ ○ ○ ○ ☆ ☆ ○ ○ ☆ ☆ ○ ○ ☆ ☆ ☆ ☆ ● ● ○ ○ ○ ○ ☆ ☆ ○ ○ ○ ○ ○ ○ ○ ○ ☆ ☆ ● ● ● ● ● ● ● ● ○ ○

E200A/PA E200MA ● ● ○ ○ ○ ○ ○ ○ - - ○ ○ ● ● ○ ○ ● ● ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ●/○ ○ ● - ☆ ☆ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ☆ ☆ - - - - ☆ ☆ ○ ○ ● ● ○ ○ ○ ○ ○ ○ ☆ ☆ ○ ○ ☆ ☆ ☆ ☆ ○ ○ ☆ ☆ ○ ○ ○ ○ ☆ ☆ ○ ○ ○ ○ ○ ○ ☆ ☆ ☆ ☆ ☆ ☆ ● ● ● ● ☆ ☆ ○ ○ ○ ○ ○ ○ ○ ○ ☆ ☆ ● ● ☆ ☆ ☆ ☆

Call LightCall LightCall Light & BuzzerElectric Cabinet LightRemote MPGSpindle Load Meter(LED Type)Spindle Speed Meter(LED Type)Work CounterTotal CounterTool Counter

Multi Tool Counter

Electric Circuit Breaker

ABS Encoder

AVR (Auto Voltage Regulator)TransformerFlash Memory CardAuto Power OffMeasurementQ-SetterAutomatic Q-SetterWork Close Confirmation Device(Only for Special Chuck)Work Setter

Linear Scale

Coolant Level Sensor (Only for Chip Conveyor)Environment

Air Conditioner

DehumidifierOil Mist CollectorOil Skimmer (Only for Chip Conveyor)MQL (Minimal Quantity Lubrication)Fixture & AutomationAuto DoorAuto Shutter (Only for Automatic System)Sub Operation PannelBar Feeder InterfaceBar Feeder (FEDEK)workpusher (Spring type)Extra M-Code 4eaAutomation Interface

I/O Extension (IN & OUT)

Parts CatcherTurret Work Pusher (For Automation)Parts ConveyorSemi Automation SystemHyd. DeviceStandard Hyd. CylinderStandard Hyd. UnitS/WMachine Guidance (HW-MCG : FANUC)Tool Monitoring (HW-TM : FANUC)DNC software (HW-eDNC : FANUC)Interactive ProgramEnergy Saving System (HW-ESS : FANUC)Machine Monitoring System (HW-MMS : FANUC)ETCTool BoxCustomized ColorCAD & CAM

1Color : ■3Color : ■■■3Color : ■■■B

FANUC (Mounted Type)SIEMENS (Built-in Type)FANUC (Mounted Type)SIEMENS (Built-in Type)DigitalDigitalDigital6ea9ea

FANUCSIEMENS

20kVA

TACOSMC

X axisZ axis

FANUCSIEMENS

16Contact32ContactMain SP.

Hollow35bar/11ℓ

Need Munsel No.

The specifications as above will only serve as a reference.

SPECIFICATIONS

Standard & Optional

Main SpindleHollow Chuck 3 JawMain SpindleSolid Chuck 3 JawStandard Soft Jaw (1set)Chuck Clamp Foot Switch2 Steps Hyd, Pressure DeviceSpindle Inside Stopper5° IndexCs-Axis (0.001°)Chuck Open/Close Confirmation Device2 Steps Chuck Foot SwitchTurretTool HolderMill TurretStraight Milling Head (Axial)Angular Milling Head (Radial)Straight Milling Head (Axial)Angular Milling Head (Radial)Boring SleeveDrill SocketU-Drill HolderU-Drill Holder SleeveO.D Extension HolderSwivel HeadTail Stock & Steady RestQuill Type Tail StockProgramable Tail StockManual Type Hyd. Steady RestStandard Live Center (Tail Stock : Standard)High Precesion Live Center2 Steps Tail Stock Pressure SystemQuill Forward/Reverse Confirmation DeviceTail Stock Foot SwitchCoolant & Air BlowStandard Coolant (Nozzle)Chuck Coolant (Upper Chuck)Gun CoolantSpindle Thru Coolant (Only for Special Chuck)Thru Coolant for Live ToolChuck Air Blow (Upper Chuck)Tail Stock Air Blow (Upper Tail Stock)Turret Air BlowAir GunSpindle Thru Air Blow (Only for Special Chuck)High Pressure CoolantPower Coolant System (For Automation)Coolant ChillerChip DisposalCoolant TankChip Conveyor(Hinge/Scraper)Special Chip Conveyor (Drum Filter)

Chip Box

Safety DeviceDoor Inter-LockTotal Splash GuardChuck Pressure Failure DetectorBack Spin Torque Limiter (BST)Torque Limiter

6″8″6″8″

AxiallCollet Type,1eaCollet Type,1eaAdapter TypeAdapter Type

For Out-Dia

6Bar

135ℓFront(Right)Front(Left)

Standard(180ℓ)Swing(200ℓ)Swing Large Size(290ℓ)Large Size(330ℓ)Costomized

Spindle & Chuck Electric Device

● : Standard ○ : Option ☆ : Prior Consultation - Non Application

E200C/PC E200MC - - ● ● - - ○ ○ ● ● ● ● ○ ○ ☆ ☆ ☆ - - ● ● ● ○ ○ ● ● - ● - ● - ● - ○ - ○ ● ● ● - ○ ○ ○ ○ ☆ - - ○ ○ ○ - - - - ○ ○ ○ ○ ☆ ☆ ○ ○ ☆ ☆ ● ● ○ ○ ○ ○ ☆ ☆ - - ○ ○ ○ ○ ☆ ☆ ○ ○ ☆ ☆ ○ ○ ☆ ☆ ☆ ☆ ● ● ○ ○ ○ ○ ☆ ☆ ○ ○ ○ ○ ○ ○ ○ ○ ☆ ☆ ● ● ● ● ○ ○ ● ● ○ ○

E200C/PC E200MC ● ● ○ ○ ○ ○ ○ ○ - - ○ ○ ● ● ○ ○ ● ● ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ●/○ ○ ● - ☆ ☆ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ☆ ☆ - - - - ☆ ☆ ○ ○ ● ● ○ ○ ○ ○ ○ ○ ☆ ☆ ○ ○ ☆ ☆ ☆ ☆ ○ ○ ☆ ☆ ○ ○ ○ ○ ☆ ☆ ○ ○ ○ ○ ○ ○ ☆ ☆ ☆ ☆ ☆ ☆ ● ● ● ● ☆ ☆ ○ ○ ○ ○ ○ ○ ○ ○ ☆ ☆ ● ● ☆ ☆ ☆ ☆

Call LightCall LightCall Light & BuzzerElectric Cabinet LightRemote MPGSpindle Load Meter(LED Type)Spindle Speed Meter(LED Type)Work CounterTotal CounterTool Counter

Multi Tool Counter

Electric Circuit Breaker

ABS Encoder

AVR (Auto Voltage Regulator)TransformerFlash Memory CardAuto Power OffMeasurementQ-SetterAutomatic Q-SetterWork Close Confirmation Device(Only for Special Chuck)Work Setter

Linear Scale

Coolant Level Sensor (Only for Chip Conveyor)Environment

Air Conditioner

DehumidifierOil Mist CollectorOil Skimmer (Only for Chip Conveyor)MQL (Minimal Quantity Lubrication)Fixture & AutomationAuto DoorAuto Shutter (Only for Automatic System)Sub Operation PannelBar Feeder InterfaceBar Feeder (FEDEK)workpusher (Spring type)Extra M-Code 4eaAutomation Interface

I/O Extension (IN & OUT)

Parts CatcherTurret Work Pusher (For Automation)Parts ConveyorSemi Automation SystemHyd. DeviceStandard Hyd. CylinderStandard Hyd. UnitS/WMachine Guidance (HW-MCG : FANUC)Tool Monitoring (HW-TM : FANUC)DNC software (HW-eDNC : FANUC)Interactive ProgramEnergy Saving System (HW-ESS : FANUC)Machine Monitoring System (HW-MMS : FANUC)ETCTool BoxCustomized ColorCAD & CAM

1Color : ■3Color : ■■■3Color : ■■■B

FANUC (Mounted Type)SIEMENS (Built-in Type)FANUC (Mounted Type)SIEMENS (Built-in Type)DigitalDigitalDigital6ea9ea

FANUCSIEMENS

20kVA

TACOSMC

X axisZ axis

FANUCSIEMENS

16Contact32ContactMain SP.

Hollow35bar/11ℓ

Need Munsel No.

The specifications as above will only serve as a reference.

18+

19

E2

00 S

ERIE

SC

nC

Tu

rn

ing

Cen

Ter

HYu

nD

Ai W

iAM

ACH

ine

TOO

L

SPECIFICATIONS

unit : mm(in)External Dimensions

SPECIFICATIONS

1443(56.8)577(22.7)

2020(79.5) 2050(80.7) 1260(49.6) 1230(48.4)

3280(129.1)

380(

14.9

)12

70(5

0)

2150

(84.

6)

500

R500

1000(39.3)

SPINDLE CENTER

1100(43.3)550(21.6)

1650(65)910(35.8)

2560(100.7)

10 (0.4

)66

5((2

6.2)

335

(13.

2)10

35(4

0.7)

110

(4.3

)11

45(4

5)67

5(26

.5)

1820

(71.

6)

380(14.9)

SPLINDLE CENTER

950(

37.4

)27

5(1

0.8)

192

(7.5

)12

24(4

8.1)

1416

(55.

7)

538(21.2)8(0.3)

920(36.2)933(36.7)

Ø16

9(6.

6)Ø

210(

8.2)

E200A/MA/PA E200C/MC/PC

12 Stations

VDI 3012 Stations

O.D Holder

I.D Holder

Boring BarSocket

Facing Holder

Face & I.DTool

Boring Bar

Drill

Boring BarBoring Bar

Socket

U-Drill Socket U-Drill Holder

Boring BarHolder Pice

Facing Holder

Face & I.D Tool

Boring BarØ32

Drill

U-Drill

Tap

End Mill

StraightMill Holder

Milling Collet

Tapping Collet

AngularMill Holder

Plug

unit : mm(in)Tooling System

20+

21

E2

00 S

ERIE

SC

nC

Tu

rn

ing

Cen

Ter

HYu

nD

Ai W

iAM

ACH

ine

TOO

L

SPECIFICATIONS

E200A/PAE200C/PC

Right/Left

Single

Ø32

Ø40

Standard

Standard

Ø8 (5/16″)

Ø10 (3/8″)

Ø12 (1/2″)

Ø16 (5/8″)

Ø20 (3/4″)

MT 1 × MT 2

MT 2

O.D Holder

Facing Holder

I.D Holder

U-Dril Holder

Straight Mill Holder

Angular Mill Holder

Boring

Drill

ER Collet

Turning Holder

Driven Holder

Boring Holder

Socket

ITEM E200A/PA E200C/PC

- -

1 1

5 5

Opt -

- Opt

- -

- -

- -

1 1

1 1

1 1

1 1

1 1

1 1

- -

Tooling Parts Detail

Specifications are subject to change for improvement without notice.

unit : mm(in)Tooling System

SPECIFICATIONS

12 Stations

VDI 3012 Stations

O.D Holder

I.D Holder

Boring BarSocket

Facing Holder

Face & I.DTool

Boring Bar

Drill

Boring BarBoring Bar

Socket

U-Drill Socket U-Drill Holder

Boring BarHolder Pice

Facing Holder

Face & I.D Tool

Boring BarØ32

Drill

U-Drill

Tap

End Mill

StraightMill Holder

Milling Collet

Tapping Collet

AngularMill Holder

Plug

E200MAE200MC

Right/Left

Single

Ø32

Ø40

Standard

Standard

Ø8 (5/16″)

Ø10 (3/8″)

Ø12 (1/2″)

Ø16 (5/8″)

Ø20 (3/4″)

MT 1 × MT 2

MT 2

O.D Holder

Facing Holder

I.D Holder

U-Dril Holder

Straight Mill Holder

Angular Mill Holder

Boring

Drill

ER Collet

Turning Holder

Driven Holder

Boring Holder

Socket

ITEM E200MA E200MC

4 4

1 1

3 3

- -

- -

1 1

1 1

1 1

1 1

1 1

1 1

1 1

- -

- -

Opt Opt

Tooling Parts Detail


unit : mm(in)Interference

ø160

(6.3

)

ø95

(3.7

) ø155(6.1)

ø155(6.1)

ø97(3.8)

ø150(5.9)

ø142(5.6)ø95(3.82)

ø520

(20.5)ø579

(22.8)

ø165(6.5)

ø210(8.27)

ø32

(1.26)ø40

(1.57)ø3

50(1

3.8)

E200A/PAE200C/PC

E200MAE200MC

22+

23

E2

00 S

ERIE

SC

nC

Tu

rn

ing

Cen

Ter

HYu

nD

Ai W

iAM

ACH

ine

TOO

L

SPECIFICATIONS

unit : mm(in)Tooling Travel Range

SPECIFICATIONS

20 (0.8

)

35 (3.4

)

7(0.3)

33.2(1.3)

25(1)

91(3.6)

32(1.2)

33.2(1.3)

91(3.6)

32(1.2)

Ø16

9(6"

)

20 (0.8

)19

0(7.

5)

210(

8.2)

(X-a

xis

st.)

20 (0.8

)19

0(7.

5)

210(

8.2)

(X-a

xis

st.)

91(3.6)

330(13) (Max. Turning Length)

80(3.1)

93(3.6)

Ø32

80(3.1)

104(

4)

35 (3.4

)

7(0.3)

25(1)

20 (0.8

)19

0(7.

5)

210(

8.2)

(X-a

xis

st.)

112(4.4)

53 (2.1

)15

7(6.

2)

210(

8.2)

(X-a

xis

st.)

Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

20 (0.8

)19

0(7.

5)

210(

8.2)

(X-a

xis

st.)

25 (1)

20 (0.8

)

25(1)

55(2.2)

114(4.5)

53 (2.1

)15

7(6.

2)

210(

8.2)

(X-a

xis

st.)

68 (2.7

)

Ø40

(1.6

)

90(3.5)

124(

4.9)

33.2(1.3)

91(3.6)

32(1.2)

Ø16

9(6"

)

5(0

.2)

205(

8)

210(

8.2)

(X-a

xis

st.)

76 286(11.2) (Z-axis st.)

437(17.2) (spindle-disk)

Ø16

9(6"

)

65(2

.7)

145(

5.7)

210(

8.2)

(X-a

xis

st.)

91(3.6) 286(11.2) (Z-axis st.)

286(11.2)(Max. Turning Length)


286(11.2) (Z-axis st.)


286(11.2) (Z-axis st.)


33.2(1.3)

91(3.6)

32(1.2)

Ø16

9(6"

)

33.2(1.3)

91(3.6)

32(1.2)

Ø16

9(6"

)

33.2(1.3)

91(3.6)

32(1.2)

35(1.4)29(1.1)

65(2.5)27(1)

44 (1.7

)20 (0.8

)

35(1.4)29(1.1)

65(2.5)27(1)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

11 (0.4

)8

(0.3

)

5(0

.2)

205(

8)21

0(8.

2) (X

-axi

s st

.)

65(2.5)

29 (1.1

)18

1(7.

1)21

0(8.

2) (X

-axi

s st

.)

81(3.2) 286(11.2) (Z-axis st.)


44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

35(1.4)29(1.1)

65(2.5)27(1)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

35(1.4)29(1.1)

65(2.5)27(1)

51 (2)

159(

6.2)

210(

8.2)

(X-a

xis

st.)

56(2.2)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

35(1.4)29(1.1)

65(2.5)27(1)

6514

521

0(8.

2) (X

-axi

s st

.)

112(4.4)

458(18) (spindle-disk)

35(1.4)29(1.1)

65(2.5)27(1)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

97(3.8)

286(11.2) (Z-axis st.)


Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

286(11.2) (Z-axis st.)


Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

520

5

210(

X-a

xis

st.) 35(1.4)29

(1.1)65(2.5)27

(1)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

86(3.3)

520

521

0(X

-axi

s st

.)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

35(1.4)29(1.1)

65(2.5)27(1)

102(4)

2918

121

0(X

-axi

s st

.)

44 (1.7

)20 (0.8

)

11 (0.4

)8

35(1.4)29(1.1)

65(2.5)27(1)

77(3)

5115

921

0(X

-axi

s st

.)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

35(1.4)29(1.1)

65(2.5)27(1)

Ø16

9(6"

)

33.2(1.3)

91(3.6)

32(1.2)

88(3.4) 80(3.1) 160(6.3) 120.8(4.7(Quill st.) (Tail Stock st.)

Face Tool holder Face Tool holder

Tail Stock Tail Stock

Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

54.2(2.1)

80(3.1) 160(6.3) 120.8(4.7)

(Quill st.) (Tail Stock st.)

Ø16

9(6"

)

33.2(1.3)

91(3.6)

32(1.2)


Tail Stock

Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

54.2(2.1)

80(3.1) 160(6.3) 120.8(4.7)


428(16.8) (spindle-disk)408(16) (PA)

330(13) (Z-axis st.)310(12.2) (PA)

310(12.2) (PA)

35 (3.4

)

7(0.3)

33.2(1.3)

25(1)

91(3.6)

32(1.2)

Ø16

9(6"

)

20 (0.8

)19

0(7.

5)

210(

8.2)

(X-a

xis

st.)

91(3.6)


428(16.8) (spindle-disk)408(16) (PA)

330(13) (Z-axis st.)310(12.2) (PA)

310(12.2) (PA)

428(16.8) (spindle-disk)408(16) (PA)

330(13) (Z-axis st.)310(12.2) (PA)

33.2(1.3)

91(3.6)

32(1.2)

20 (0.8

)19

0(7.

5)

210(

8.2)

(X-a

xis

st.)

93(3.6)

Ø32

(1.2

)

428(16.8) (spindle-disk)408(16) (PA)

330(13) (Z-axis st.)310(12.2) (PA)

449(17.6) (spindle-disk)429(16.8) (PC)

330(13) (Z-axis st.)310(12.2) (PC)

449(17.6) (spindle-disk)429(16.8) (PC)

330(13) (Z-axis st.)310(12.2) (PC)

Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

114(4.5)

68 (2.7

)

Ø40

(1.6

)

449(17.6) (spindle-disk)429(16.8) (PC)

330(13) (Z-axis st.)310(12.2) (PC)

330(13) (Max. Turning Length)310(12.2) (PC)

35 (3.4

)

7(0.3)

25(1)

112(4.4)

40.1(1.5)

112(4.4)

39(1.5)

449(17.6) (spindle-disk)429(16.8) (PC)

330(13) (Z-axis st.)310(12.2) (PC)


Ø16

9(6"

)

33.2(1.3)

91(3.6)

32(1.2)

286(11.2) (Z-axis st.)


286(11.2) (Z-axis st.)


286(11.2) (Z-axis st.)


O.D. Tool holder

I.D. Tool holder I.D. Tool holder (with Tail Stock)

O.D. Tool holder (with Tail Stock)

Tail Stock


I.D. Tool holder (with Tail Stock)

O.D. Tool holder

I.D. Tool holder

O.D. Tool holder (with Tail Stock) I.D. Tool holder (with Tail Stock) O.D. Tool holder (with Tail Stock) I.D. Tool holder (with Tail Stock)

Straight Milling Head (with Tail Stock)Angular Milling Head (with Tail Stock)Straight Milling Head (with Tail Stock)Angular Milling Head (with Tail Stock)

E200A/PA

E200C/PC

20 (0.8

)

35 (3.4

)

7(0.3)

33.2(1.3)

25(1)

91(3.6)

32(1.2)

33.2(1.3)

91(3.6)

32(1.2)

Ø16

9(6"

)

20 (0.8

)19

0(7.

5)

210(

8.2)

(X-a

xis

st.)

20 (0.8

)19

0(7.

5)

210(

8.2)

(X-a

xis

st.)

91(3.6)


80(3.1)

93(3.6)

Ø32

80(3.1)

104(

4)

35 (3.4

)

7(0.3)

25(1)

20 (0.8

)19

0(7.

5)

210(

8.2)

(X-a

xis

st.)

112(4.4)

53 (2.1

)15

7(6.

2)

210(

8.2)

(X-a

xis

st.)

Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

20 (0.8

)19

0(7.

5)

210(

8.2)

(X-a

xis

st.)

25 (1)

20 (0.8

)

25(1)

55(2.2)

114(4.5)

53 (2.1

)15

7(6.

2)

210(

8.2)

(X-a

xis

st.)

68 (2.7

)

Ø40

(1.6

)

90(3.5)

124(

4.9)

33.2(1.3)

91(3.6)

32(1.2)

Ø16

9(6"

)

5(0

.2)

205(

8)

210(

8.2)

(X-a

xis

st.)

76 286(11.2) (Z-axis st.)


Ø16

9(6"

)

65(2

.7)

145(

5.7)

210(

8.2)

(X-a

xis

st.)

91(3.6) 286(11.2) (Z-axis st.)



286(11.2) (Z-axis st.)


286(11.2) (Z-axis st.)


33.2(1.3)

91(3.6)

32(1.2)

Ø16

9(6"

)

33.2(1.3)

91(3.6)

32(1.2)

Ø16

9(6"

)

33.2(1.3)

91(3.6)

32(1.2)

35(1.4)29(1.1)

65(2.5)27(1)

44 (1.7

)20 (0.8

)

35(1.4)29(1.1)

65(2.5)27(1)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

11 (0.4

)8

(0.3

)

5(0

.2)

205(

8)21

0(8.

2) (X

-axi

s st

.)

65(2.5)

29 (1.1

)18

1(7.

1)21

0(8.

2) (X

-axi

s st

.)

81(3.2) 286(11.2) (Z-axis st.)


44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

35(1.4)29(1.1)

65(2.5)27(1)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

35(1.4)29(1.1)

65(2.5)27(1)

51 (2)

159(

6.2)

210(

8.2)

(X-a

xis

st.)

56(2.2)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

35(1.4)29(1.1)

65(2.5)27(1)

6514

521

0(8.

2) (X

-axi

s st

.)

112(4.4)


35(1.4)29(1.1)

65(2.5)27(1)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

97(3.8)

286(11.2) (Z-axis st.)


Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

286(11.2) (Z-axis st.)


Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

520

5

210(

X-a

xis

st.) 35(1.4)29

(1.1)65(2.5)27

(1)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

86(3.3)

520

521

0(X

-axi

s st

.)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

35(1.4)29(1.1)

65(2.5)27(1)

102(4)

2918

121

0(X

-axi

s st

.)

44 (1.7

)20 (0.8

)

11 (0.4

)8

35(1.4)29(1.1)

65(2.5)27(1)

77(3)

5115

921

0(X

-axi

s st

.)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

35(1.4)29(1.1)

65(2.5)27(1)

Ø16

9(6"

)

33.2(1.3)

91(3.6)

32(1.2)




Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

54.2(2.1)

80(3.1) 160(6.3) 120.8(4.7)


Ø16

9(6"

)

33.2(1.3)

91(3.6)

32(1.2)


Tail Stock

Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

54.2(2.1)

80(3.1) 160(6.3) 120.8(4.7)


428(16.8) (spindle-disk)408(16) (PA)

330(13) (Z-axis st.)310(12.2) (PA)

310(12.2) (PA)

35 (3.4

)

7(0.3)

33.2(1.3)

25(1)

91(3.6)

32(1.2)

Ø16

9(6"

)

20 (0.8

)19

0(7.

5)

210(

8.2)

(X-a

xis

st.)

91(3.6)


428(16.8) (spindle-disk)408(16) (PA)

330(13) (Z-axis st.)310(12.2) (PA)

310(12.2) (PA)

428(16.8) (spindle-disk)408(16) (PA)

330(13) (Z-axis st.)310(12.2) (PA)

33.2(1.3)

91(3.6)

32(1.2)

20 (0.8

)19

0(7.

5)

210(

8.2)

(X-a

xis

st.)

93(3.6)

Ø32

(1.2

)

428(16.8) (spindle-disk)408(16) (PA)

330(13) (Z-axis st.)310(12.2) (PA)

449(17.6) (spindle-disk)429(16.8) (PC)

330(13) (Z-axis st.)310(12.2) (PC)

449(17.6) (spindle-disk)429(16.8) (PC)

330(13) (Z-axis st.)310(12.2) (PC)

Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

114(4.5)

68 (2.7

)

Ø40

(1.6

)

449(17.6) (spindle-disk)429(16.8) (PC)

330(13) (Z-axis st.)310(12.2) (PC)


35 (3.4

)

7(0.3)

25(1)

112(4.4)

40.1(1.5)

112(4.4)

39(1.5)

449(17.6) (spindle-disk)429(16.8) (PC)

330(13) (Z-axis st.)310(12.2) (PC)


Ø16

9(6"

)

33.2(1.3)

91(3.6)

32(1.2)

286(11.2) (Z-axis st.)


286(11.2) (Z-axis st.)


286(11.2) (Z-axis st.)


O.D. Tool holder



Tail Stock



O.D. Tool holder

I.D. Tool holder




SPECIFICATIONS

24+

25

E2

00 S

ERIE

SC

nC

Tu

rn

ing

Cen

Ter

HYu

nD

Ai W

iAM

ACH

ine

TOO

L

20 (0.8

)

35 (3.4

)

7(0.3)

33.2(1.3)

25(1)

91(3.6)

32(1.2)

33.2(1.3)

91(3.6)

32(1.2)

Ø16

9(6"

)

20 (0.8

)19

0(7.

5)

210(

8.2)

(X-a

xis

st.)

20 (0.8

)19

0(7.

5)

210(

8.2)

(X-a

xis

st.)

91(3.6)


80(3.1)

93(3.6)

Ø32

80(3.1)

104(

4)

35 (3.4

)

7(0.3)

25(1)

20 (0.8

)19

0(7.

5)

210(

8.2)

(X-a

xis

st.)

112(4.4)

53 (2.1

)15

7(6.

2)

210(

8.2)

(X-a

xis

st.)

Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

20 (0.8

)19

0(7.

5)

210(

8.2)

(X-a

xis

st.)

25 (1)

20 (0.8

)

25(1)

55(2.2)

114(4.5)

53 (2.1

)15

7(6.

2)

210(

8.2)

(X-a

xis

st.)

68 (2.7

)

Ø40

(1.6

)

90(3.5)

124(

4.9)

33.2(1.3)

91(3.6)

32(1.2)

Ø16

9(6"

)

5(0

.2)

205(

8)

210(

8.2)

(X-a

xis

st.)

76 286(11.2) (Z-axis st.)


Ø16

9(6"

)

65(2

.7)

145(

5.7)

210(

8.2)

(X-a

xis

st.)

91(3.6) 286(11.2) (Z-axis st.)



286(11.2) (Z-axis st.)


286(11.2) (Z-axis st.)


33.2(1.3)

91(3.6)

32(1.2)

Ø16

9(6"

)

33.2(1.3)

91(3.6)

32(1.2)

Ø16

9(6"

)

33.2(1.3)

91(3.6)

32(1.2)

35(1.4)29(1.1)

65(2.5)27(1)

44 (1.7

)20 (0.8

)

35(1.4)29(1.1)

65(2.5)27(1)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

11 (0.4

)8

(0.3

)

5(0

.2)

205(

8)21

0(8.

2) (X

-axi

s st

.)

65(2.5)

29 (1.1

)18

1(7.

1)21

0(8.

2) (X

-axi

s st

.)

81(3.2) 286(11.2) (Z-axis st.)


44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

35(1.4)29(1.1)

65(2.5)27(1)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

35(1.4)29(1.1)

65(2.5)27(1)

51 (2)

159(

6.2)

210(

8.2)

(X-a

xis

st.)

56(2.2)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

35(1.4)29(1.1)

65(2.5)27(1)

6514

521

0(8.

2) (X

-axi

s st

.)

112(4.4)


35(1.4)29(1.1)

65(2.5)27(1)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

97(3.8)

286(11.2) (Z-axis st.)


Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

286(11.2) (Z-axis st.)


Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

520

5

210(

X-a

xis

st.) 35(1.4)29

(1.1)65(2.5)27

(1)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

86(3.3)

520

521

0(X

-axi

s st

.)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

35(1.4)29(1.1)

65(2.5)27(1)

102(4)

2918

121

0(X

-axi

s st

.)

44 (1.7

)20 (0.8

)

11 (0.4

)8

35(1.4)29(1.1)

65(2.5)27(1)

77(3)

5115

921

0(X

-axi

s st

.)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

35(1.4)29(1.1)

65(2.5)27(1)

Ø16

9(6"

)

33.2(1.3)

91(3.6)

32(1.2)




Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

54.2(2.1)

80(3.1) 160(6.3) 120.8(4.7)


Ø16

9(6"

)

33.2(1.3)

91(3.6)

32(1.2)


Tail Stock

Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

54.2(2.1)

80(3.1) 160(6.3) 120.8(4.7)


428(16.8) (spindle-disk)408(16) (PA)

330(13) (Z-axis st.)310(12.2) (PA)

310(12.2) (PA)

35 (3.4

)

7(0.3)

33.2(1.3)

25(1)

91(3.6)

32(1.2)

Ø16

9(6"

)

20 (0.8

)19

0(7.

5)

210(

8.2)

(X-a

xis

st.)

91(3.6)


428(16.8) (spindle-disk)408(16) (PA)

330(13) (Z-axis st.)310(12.2) (PA)

310(12.2) (PA)

428(16.8) (spindle-disk)408(16) (PA)

330(13) (Z-axis st.)310(12.2) (PA)

33.2(1.3)

91(3.6)

32(1.2)

20 (0.8

)19

0(7.

5)

210(

8.2)

(X-a

xis

st.)

93(3.6)

Ø32

(1.2

)

428(16.8) (spindle-disk)408(16) (PA)

330(13) (Z-axis st.)310(12.2) (PA)

449(17.6) (spindle-disk)429(16.8) (PC)

330(13) (Z-axis st.)310(12.2) (PC)

449(17.6) (spindle-disk)429(16.8) (PC)

330(13) (Z-axis st.)310(12.2) (PC)

Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

114(4.5)

68 (2.7

)

Ø40

(1.6

)

449(17.6) (spindle-disk)429(16.8) (PC)

330(13) (Z-axis st.)310(12.2) (PC)


35 (3.4

)

7(0.3)

25(1)

112(4.4)

40.1(1.5)

112(4.4)

39(1.5)

449(17.6) (spindle-disk)429(16.8) (PC)

330(13) (Z-axis st.)310(12.2) (PC)


Ø16

9(6"

)

33.2(1.3)

91(3.6)

32(1.2)

286(11.2) (Z-axis st.)


286(11.2) (Z-axis st.)


286(11.2) (Z-axis st.)


O.D. Tool holder



Tail Stock



O.D. Tool holder

I.D. Tool holder



E200MA


SPECIFICATIONS

20 (0.8

)

35 (3.4

)

7(0.3)

33.2(1.3)

25(1)

91(3.6)

32(1.2)

33.2(1.3)

91(3.6)

32(1.2)

Ø16

9(6"

)

20 (0.8

)19

0(7.

5)

210(

8.2)

(X-a

xis

st.)

20 (0.8

)19

0(7.

5)

210(

8.2)

(X-a

xis

st.)

91(3.6)


80(3.1)

93(3.6)

Ø32

80(3.1)

104(

4)

35 (3.4

)

7(0.3)

25(1)

20 (0.8

)19

0(7.

5)

210(

8.2)

(X-a

xis

st.)

112(4.4)

53 (2.1

)15

7(6.

2)

210(

8.2)

(X-a

xis

st.)

Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

20 (0.8

)19

0(7.

5)

210(

8.2)

(X-a

xis

st.)

25 (1)

20 (0.8

)

25(1)

55(2.2)

114(4.5)

53 (2.1

)15

7(6.

2)

210(

8.2)

(X-a

xis

st.)

68 (2.7

)

Ø40

(1.6

)

90(3.5)

124(

4.9)

33.2(1.3)

91(3.6)

32(1.2)

Ø16

9(6"

)

5(0

.2)

205(

8)

210(

8.2)

(X-a

xis

st.)

76 286(11.2) (Z-axis st.)


Ø16

9(6"

)

65(2

.7)

145(

5.7)

210(

8.2)

(X-a

xis

st.)

91(3.6) 286(11.2) (Z-axis st.)



286(11.2) (Z-axis st.)


286(11.2) (Z-axis st.)


33.2(1.3)

91(3.6)

32(1.2)

Ø16

9(6"

)

33.2(1.3)

91(3.6)

32(1.2)

Ø16

9(6"

)

33.2(1.3)

91(3.6)

32(1.2)

35(1.4)29(1.1)

65(2.5)27(1)

44 (1.7

)20 (0.8

)

35(1.4)29(1.1)

65(2.5)27(1)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

11 (0.4

)8

(0.3

)

5(0

.2)

205(

8)21

0(8.

2) (X

-axi

s st

.)

65(2.5)

29 (1.1

)18

1(7.

1)21

0(8.

2) (X

-axi

s st

.)

81(3.2) 286(11.2) (Z-axis st.)


44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

35(1.4)29(1.1)

65(2.5)27(1)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

35(1.4)29(1.1)

65(2.5)27(1)

51 (2)

159(

6.2)

210(

8.2)

(X-a

xis

st.)

56(2.2)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

35(1.4)29(1.1)

65(2.5)27(1)

6514

521

0(8.

2) (X

-axi

s st

.)

112(4.4)


35(1.4)29(1.1)

65(2.5)27(1)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

97(3.8)

286(11.2) (Z-axis st.)


Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

286(11.2) (Z-axis st.)


Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

520

5

210(

X-a

xis

st.) 35(1.4)29

(1.1)65(2.5)27

(1)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

86(3.3)

520

521

0(X

-axi

s st

.)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

35(1.4)29(1.1)

65(2.5)27(1)

102(4)

2918

121

0(X

-axi

s st

.)

44 (1.7

)20 (0.8

)

11 (0.4

)8

35(1.4)29(1.1)

65(2.5)27(1)

77(3)

5115

921

0(X

-axi

s st

.)

44 (1.7

)20 (0.8

)

11 (0.4

)8

(0.3

)

35(1.4)29(1.1)

65(2.5)27(1)

Ø16

9(6"

)

33.2(1.3)

91(3.6)

32(1.2)




Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

54.2(2.1)

80(3.1) 160(6.3) 120.8(4.7)


Ø16

9(6"

)

33.2(1.3)

91(3.6)

32(1.2)


Tail Stock

Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

54.2(2.1)

80(3.1) 160(6.3) 120.8(4.7)


428(16.8) (spindle-disk)408(16) (PA)

330(13) (Z-axis st.)310(12.2) (PA)

310(12.2) (PA)

35 (3.4

)

7(0.3)

33.2(1.3)

25(1)

91(3.6)

32(1.2)

Ø16

9(6"

)

20 (0.8

)19

0(7.

5)

210(

8.2)

(X-a

xis

st.)

91(3.6)


428(16.8) (spindle-disk)408(16) (PA)

330(13) (Z-axis st.)310(12.2) (PA)

310(12.2) (PA)

428(16.8) (spindle-disk)408(16) (PA)

330(13) (Z-axis st.)310(12.2) (PA)

33.2(1.3)

91(3.6)

32(1.2)

20 (0.8

)19

0(7.

5)

210(

8.2)

(X-a

xis

st.)

93(3.6)

Ø32

(1.2

)

428(16.8) (spindle-disk)408(16) (PA)

330(13) (Z-axis st.)310(12.2) (PA)

449(17.6) (spindle-disk)429(16.8) (PC)

330(13) (Z-axis st.)310(12.2) (PC)

449(17.6) (spindle-disk)429(16.8) (PC)

330(13) (Z-axis st.)310(12.2) (PC)

Ø21

0(8"

)

40.1(1.5)

112(4.4)

39(1.5)

114(4.5)

68 (2.7

)

Ø40

(1.6

)

449(17.6) (spindle-disk)429(16.8) (PC)

330(13) (Z-axis st.)310(12.2) (PC)


35 (3.4

)

7(0.3)

25(1)

112(4.4)

40.1(1.5)

112(4.4)

39(1.5)

449(17.6) (spindle-disk)429(16.8) (PC)

330(13) (Z-axis st.)310(12.2) (PC)


Ø16

9(6"

)

33.2(1.3)

91(3.6)

32(1.2)

286(11.2) (Z-axis st.)


286(11.2) (Z-axis st.)


286(11.2) (Z-axis st.)


O.D. Tool holder



Tail Stock



O.D. Tool holder

I.D. Tool holder



E200C


SPECIFICATIONS

26+

27

E2

00 S

ERIE

SC

nC

Tu

rn

ing

Cen

Ter

HYu

nD

Ai W

iAM

ACH

ine

TOO

L

Swing Over the Bed

Swing Over the Carriage

Max. Turning Dia.

Max. Turning Length

Bar Capacity

Chuck Size

Spindle Bore

Spindle Speed (rpm)

Motor (Max/Cont.)

Torque (Max/Cont.)

Spindle Type

Spindle Nose

C-axis Indexing

Travel (X/Z/B)

Rapid Travel (X/Z/B)

Slide Type

No. of Tool

Tool Size OD

ID

Indexing Time

Motor (Max/Cont.)

Milling Tool Speed (rpm)

Torque (Max/Cont.)

Collet Size

Type

Taper

Quill Dia.

Quill Travel

Travel

Coolant Tank

Lubricating Tank

Electric Power Supply

Thickness of Power Cable

Voltage

Floor Space (L×W)

Height

Weight

Controller

CAPACITY

FEED

TANkCAPACITY

SPINDlE

TURRET

lIvE TOOl

TAIlSTOCk

MACHINE

NC

POWERSUPPlY

mm(in)

mm(in)

mm(in)

mm(in)

mm(in)

mm(in)

mm(in)

r/min

kW(HP)

N.m

-

-

deg

mm(in)

m/min

-

EA

mm(in)

mm(in)

sec/step

kW(HP)

r/min

N.m

mm(in)

-

-

mm(in)

mm(in)

mm(in)

ℓ(gel)

ℓ(gel)

kVA

Sq

V/Hz

mm(in)

mm(in)

kg(lb)

-


ITEM E200MAE200A E200PA

Ø550 (21.7″)

Ø350 (13.8″)

Ø350 (13.8″) Ø290 (11.4″) Ø350 (13.8″)

300 (11.8″) 255 (10″) 280 (11″)

Ø45 (1.8″)

Ø169 (6.7″)

Ø53 (2.1″)

6,000 [6,000] 6,000

15/11(20/15)[10.8/9(14.4/12)] 7.5/5.5 (10/7.4) 15/11 (20/15)

95.6/52.5 [75.6/68.7] 62/45.5 95.6/52.5

BELT

A2-5

- 0.001˚ -

210/330(8.3″/13″) 210/286(8.3″/11.3″) 210/310(8.3″/12.2″)

36/36 24/24

LM GUIDE BOX GUIDE

12

□25 (1″) □20 (0.8″) □25 (1″)

Ø32 (1.3″)

0.12 0.23 0.12

- 7.6/3 (10/4) -

- 4,500 -

- 35/12 -

- Ø16 (0.6″) ER25 -

- VDI30 -

MT4

Ø65 (2.56″)

80 (3.15″)

160 (6.3″)

135 (35.7)

1.8 (0.48)

17

OVER 16

220/60 (200/50)

2,020×1,763 (79.5″×69.4″)

1,820 (71.7″)

3,800 (8,378)

HYUNDAI WIA FANUC i Series [E200A : SIEMENS 828D BASIC]

Specifications [ ] : Option

SPECIFICATIONS


Swing Over the Bed

Swing Over the Carriage

Max. Turning Dia.

Max. Turning Length

Bar Capacity

Chuck Size

Spindle Bore

Spindle Speed (rpm)

Motor (Max/Cont.)

Torque (Max/Cont.)

Spindle Type

Spindle Nose

C-axis Indexing

Travel (X/Z/B)

Rapid Travel (X/Z/B)

Slide Type

No. of Tool

Tool Size OD

ID

Indexing Time

Motor (Max/Cont.)

Milling Tool Speed (rpm)

Torque (Max/Cont.)

Collet Size

Type

Taper

Quill Dia.

Quill Travel

Travel

Coolant Tank

Lubricating Tank

Electric Power Supply

Thickness of Power Cable

Voltage

Floor Space (L×W)

Height

Weight

Controller

CAPACITY

FEED

TANkCAPACITY

SPINDlE

TURRET

lIvE TOOl

TAIlSTOCk

MACHINE

NC

POWERSUPPlY

mm(in)

mm(in)

mm(in)

mm(in)

mm(in)

mm(in)

mm(in)

r/min

kW(HP)

N.m

-

-

deg

mm(in)

m/min

-

EA

mm(in)

mm(in)

sec/step

kW(HP)

r/min

N.m

mm(in)

-

-

mm(in)

mm(in)

mm(in)

ℓ(gel)

ℓ(gel)

kVA

Sq

V/Hz

mm(in)

mm(in)

kg(lb)

-

ITEM E200MCE200C E200PC

Ø550 (21.7″)

Ø350 (13.8″)

Ø350 (13.8″) Ø290 (11.4″) Ø350 (13.8″)

300 (11.8″) 255 (10″) 280 (11″)

Ø65 (2.56″)

Ø210 (8.3″)

Ø78 (3.1″)

4,000 [6,000] 4,000

15/11(20/15)[10.8/9(14.4/12)] 11/7.5 (10/7.4) 15/11 (20/15)

167/92 [132.3/110.3] 105/71.6 167/92

BELT

A2-5

- 0.001˚ -

210/330(8.3″/13″) 210/286(8.3″/11.3″) 210/310(8.3″/12.2″)

36/36 24/24

LM GUIDE BOX GUIDE

12

□25 (1″) □20 (0.8″) □25 (1″)

Ø40 (1.6″) Ø32 (1.3″) Ø40 (1.6″)

0.12 0.23 0.12

- 7.6/3 (10/4) -

- 4,500 -

- 35/12 -

- Ø16 (0.6″) ER25 -

- VDI30 -

MT4

Ø65 (2.56″)

80 (3.15″)

160 (6.3″)

135 (35.7)

1.8 (0.48)

17

OVER 16

220/60 (200/50)

2,050×1,763 (80.7″×69.4″)

1,820 (71.7″)

3,900 (8,598)

HYUNDAI WIA FANUC i Series [E200C : SIEMENS 828D BASIC]

Specifications [ ] : Option

SPECIFICATIONS

28+

29

E2

00 S

ERIE

SC

nC

Tu

rn

ing

Cen

Ter

HYu

nD

Ai W

iAM

ACH

ine

TOO

L

SIEMENS 828D BASICControl functionMax. configuration of axisMax. configuration of axis and sp.Least Command/inputFeed functionFeedrate OverrideRapid Traverse OverrideAcceleration with jerk limitationProgrammable accelerationFollow-upmodeMeasuring system 1 and 2, selectableSeparate path feed for corners and chamfersTravel to fixed stopSpindle functionSpindle OverrideSpindle OrientationSpindle Speed LimitationRigid TappingInterpolation functionLinear interpolation axisCircle via center point and end pointCircle via interpolation pointHelical interpolationUniversal interpolator NURBS (non-uniform rational B splines)Continuous-path mode with programmable rounding clearanceTool functionTool Radius Comp.Zero Offset (G54, G55, G56, G57 ,G58, G59)Programmable Zero OffsetTool managementDisplayCRT / MDIScreen SaverManual OperationManual Handle/Jog FeedRepositionReference ApproachSpindle ControlAuto OperationSingle BlockFeed HoldOptional Block SkipMachine LockDry RunSimulationDiagnosis functionAlarm DisplaySpindle Load/rpm MeterPLC status/LAD displayProgram functionPart Program Storage LengthProgram NameSubroutine CallAbsolute/incremental CommandScaling, ROTInch / Metric ConversionConversational Cycle ProgramBlock SearchVariable Program (Macro)Read / Write System VariableBackGround EditingMiscellaneous FunctionsLable SkipProgram Stop/EndLookahead , Jerk LimitationFeed &forward controlISO Dialect Interpreter(G291) (Fanuc Program exe)Maximum number of tools/cuttingsNumber of levels for skip blocks 1

3 Axis5 Axis0.0001mm / 0.00001inch

0 - 120%F1, 5, 25/50, 100%

50% - 120%

Max. 4axis

50EA

8.4˝ Color LCD

Ref 1, 2 ApproachStart, Stop, Rev, Jog, Ort.

(2 dimensional)

1MB23 digit (7 level) G90 - G91

(22 Machine)

M - Code

M00, M01, M02, M30

80/160

Protection FunctionEmergency StopOver TravelContour MonitoringProgram ProtectionAutomation Support Fun.Actual Speed Display(Monitor)Tool Life ManagementWork Count Functionlanguage Function

Two Language switchable

Data TransferRS 232C I/F / EthernetUSB Memory Stick & CF Card

OptionShop Turn3D SimulationDRF offsetTeach -inNumber of levels for skip blocks 8TRACYL (Cylinder interpolation)TRANSMIT (Pole coordinate command)Sister ToolA,B,C Spline InterpolationRCS Host (Remote Control)Simultaneous Recording (real time monitoring)Analysis of Internal Drive ValuesNetwork Drive ManagementHW-TM

Figures in inch are converted from metric values.Design and specifications subject to change without notice.

Soft Limit & Hard O.T

(Time, Parts)(Internal)

Chinese Traditional, Czech, Danish, Dutch, Finnish, Hungarian, Japanese, Korean, Polish, Russian, Swedish, Portuguese, Turkish

CONTROLLER

HYUNDAI WIA FANUC i SeriesControl function / Screen display

Control axis number

Simultaneous control axis number

Min. input unit

Min. increment

High speed HRV controlInch/metric conversionInterlockMachinelockEmergency stopStroke check 1Stroke check 2Stroke check 3Follow upSub offBacklash compensationPosition switchFault load detectionHigh resolution transfer control(HRM) LCD / MDIOperation Auto handling (memory)MDI handlingSearch functionProgram re-startPreventive function for mis-handlingBuffer registrationProgram check functionSingle blockFeed functionManual jog feedManual Handle ScaleFeed commandFeed overrideJog overrideRapid transfer overrideOverride releaseTransfer/minute, Transfer/rpmProgram input and interpolation functionNano interpolationDwell functionThreading retractVariable lead threadingReturn of first zero pointReturn check of zero pointReturn of second zero pointProgram stop/overTape codeOptional block skipMax. program enter unitProgram numberAbsolute, incremental programmingDecimal number enteringPlain selectionWork coordinate selectionManual absoluteDrawing dimension direct input programmingG code systemProgrammable data inputSub program callCustom macro BCustom macro variable additionMultiple repetitive cyclesMultiple repetitive cycles ⅡLathe fixed cycleManual guide i

Max. 4 axisX, Z axisX, Z, C axis (M type machine)2 axis/straight, arc interpolation (Max. 4 axis)X, Z axis : 0.001 mm (0.0001″)C axis : 0.001 degX, Z axis : 0.001 mm (0.0001″)C axis: 0.001 deg

G20 / G21Each axis / All axisFull axis

Over-travel

+/- 0~9999 Pulse (Rapid traverse & cutting feed)

Back spin torque limiter (BST)

8.4″ Color LCD

Sequence, Program

Dry run, Program check

Rapid transfer, Jog, Handlex1, x10, x100Direct command for F code feed0~200% (10% units)0~2,000 mm/min [79 ipm]F1, F5, F25/F50, F100%

Positioning/Straight/Arc (G00/G01/G02/G03)G04, 0~9999.9999 sec

G28, ManualG27G30M00, M01 / M02, M30EIA / ISO1 EA+/- 9999.9999”O+4 digit number

G17, G18, G19G52 to G59“ON” fixedIncluded chamfering / Corner R`A/B/CG1010 Steps

#100 to #199, #500 to #999

Interactive program

Sub / Main spindle functionM-Code functionM-Code function lockLock sp. speed commandMain sp. constant controlSpindle speed overrideSpindle position decisionRigid tappingTool function / Tool compensationTool functionTool offset quantityTool offsetTool nose radius compensationConfiguration/wear compensationDirect input of measuring tool compensation BTool life managementData input, output and editing functionInput/output interfaceMemory card input and outputProgram storing capacityProgram registration quantityMemory lockBackground editAdditional expandable editScreen, diagnosis and setting functionSelf diagnosis functionHistoric screenHelp functionOutside messageOperation time/counter displayActual sp. speed, T code displayActual machining feed rate displayHandling monitor screenGraphic screenSpindle/servo setting screenLanguagesLCD screen saveAuto data backupFunction according with machine specificationCs contouring functionStored pitch error compensationPole coordinate commandCylinder interpolationDrill fixed cycleSp. positioning expandableControlling live tool by servo motor

OptionHigh speed EthernetOptional block skip3rd & 4th reference point returnProgram storing capacityData serverPolygon turningHelical interpolationDynamic graphic display8 level data protection functionTool load monitoring functionManual guide i

Figures in inch are converted from metric values.Design and specifications subject to change without notice.

M4 digit number

S + 4 digit number, binary number outputG96, G9750% ~ 150% (10% unit)

T2 + 264 pairs

G40, G41, G42

RS232C, Memory Card

512 KbyteMax. 500 programs

NC program copy, move, change

Alarm and handling screen

Rod meter light

Selection of random 5 EAScreen saver

Turn millTurn millTurn millTurn millTurn millTurn millTurn mill

100 Mbps (Option board is required)9 EA

512 Kbyte 1GB

HWTM (embedded Fanuc type)Interactive program (10.4″ Color LCD)

30+

31

E2

00 S

ERIE

SC

nC

Tu

rn

ing

Cen

Ter

HYu

nD

Ai W

iAM

ACH

ine

TOO

L

CONTROLLER

BEIJING OFFICESHENYANG OFFICE

Qingdao OFFICE

Jiangsu HYUNDAI WIA

HYUNDAI WIAMachine Tools Co. LTD

HEADOFFICE

GUANGZHOU OFFICE

WUHAN OFFICECHENGDU OFFICE

HYUNDAI WIA India

HYUNDAI WIA EuropeRaunheim Service Center

■RaunheimServiceCenter ■HYUNDAIWIAEurope ■ChinaBeijingOffice ■ChinaShenyangOffice

■ChinaGuangzhouOffice■HYUNDAIWIAIndia

GLOBAL NETWROK

AMERICA CORP. (Chicago Office)

AMERICA CORP.(L.A Office)

■MachineToolChinaSalesOffice

■JiangsuHYUNDAIWIA

■AmericaCorp.(L.A. office)

■AmericaCorp.(Chicago office)

■HYUNDAIWIAAmericaTechnicalCenter

AmericasHYUNDAIWIAAmerica265, Spring Lake Drive, Itasca, IL, 60143

L.A.office11125 Knott Ave. STE B/C Cypress, CA 90630

HYUNDAIWIAAmericaTechnicalcenter39205 Country Club Drive Suite C-9, Farmington Hills, MI, 48310

EuropeHYUNDAIWIAEuropeKaiserleipromenade 5, 63067 Offenbach, Germany

RaunheimServiceCenterFrankfurter Strasse 51, 65479 Raunheim, Germany

IndiaHYUNDAIWIAIndia48, Sur.No78-80. Kandamangalam Village, Sengadu Post, Sriperumbudur Taluk, Kancheepuram, Tamil Nadu - 602 105

ChinaJiangsuHYUNDAIWIACompany No.6, Fenghuang Road, Fenghuang Town,Zhangjiagang City, Jiangsu Province, China

HYUNDAIWIAMachineToolsCo.LTD1-3F, Bldg6, No.1535 Hongmei Road, Xuhui District,Shanghai, China, 200233

ChinaBeijingOfficeRoom 908, Hyundai Motor Building, No.38 Xiaoyun Road, Chaoyang District, Beijing, China 100027

ChinaGuangzhouOfficeRoom 609, No.1 Yingbin Building (Dashi Section) Panyu District, Guangzhou Ctiy, Guangdong, China 511431

ChinaChengduOfficeRoom 2103, Block A, Times Plaza, No.2 Zongfu Road, Jinjiang District, Chengdu, China 610016

ChinaWuhanOffice Room 302, B Tower, Donghe Center, Dongfeng Three Toad, Zhuankou, Wuhan, Hubei, China

ChinaQingdaoOfficeRoom 1207, Caifu Building, 182-6 Haier Middle Road, Qingdao 266061, China

ChinaShenyangOfficeRoom 1304, No.53 Beizhan Road, Shenhe District,Shenyang China 110013

153, Jeongdong-ro, Seongsan-gu, Changwon, Gyeongnam, Korea

Headquarters

32+

33

E2

00 S

ERIE

SC

nC

Tu

rn

ing

Cen

Ter

HYu

nD

Ai W

iAM

ACH

ine

TOO

L

E200 Series - hyundai-wia.de · The CNC Turning Center E200 Series was developd by Hyundai Wia, a...

Documents

Transcript of E200 Series - hyundai-wia.de · The CNC Turning Center E200 Series was developd by Hyundai Wia, a...