E15S08P93

download E15S08P93

of 5

description

TMA Spec

Transcript of E15S08P93

  • E15S08P93E15S08P93 TowerMountedAmplifier,DualUMTS2100withAISG

    Electrical Specifications Rx (Uplink) Bandwidth 60.00MHzLicenseBand UMTSFrequencyBand 19201980MHzGain 12dBGainTolerance 1GainRipple,maximum 0.4dBNoiseFigure,MidBand,typical 1.20dB@12dBNoiseFigure,FullBand,typical 1.40dB@12dBInputP1dB,typical 1dBmOutputIP3,minimum 24dBm@12dBReturnLoss,minimum 18dBInsertionLoss,BypassMode,typical 3.20dBReturnLoss,BypassMode,typical 19dBTxBandRejection 80dBGroupDelayVariation,maximum [email protected],maximum 60ns

    Electrical Specifications Tx (Downlink) Bandwidth 60.00MHzInsertionLoss,maximum 0.40dBLicenseBand UMTSFrequencyBand 21102170MHzInsertionLossRipple,maximum 0.10dBReturnLoss,minimum 18dBInputPower,RMS,maximum 160WInputPower,PEP,maximum 2500WRxBandRejection 50dBGroupDelayVariation,maximum [email protected],maximum 18ns

    Electrical Specifications 2 Tx (Downlink) 3rdOrderIMD 110dBm3rdOrderIMDTestMethod Two+43dBmcarriers

    Electrical Specifications DefaultProtocol AISG2.0

    Product SpecificationsProduct Specifications

    2013CommScope, Inc. All rights reserved. All trademarks identified by 2013CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks, respectively, of CommScope.or are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: April 23, 2012All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: April 23, 2012

    page 1 of 5page 1 of 5 June 4, 2013June 4, 2013

  • Protocol AISG2.0Voltage 730VdcOperatingCurrentatVoltage 100mA@12VOperatingCurrentTolerance 15mAAlarmFunctionality AISG | CWAFailureCurrentConsumption 250mA15mA@12VRETSystemCompatible 1Output,24VdcandRS485LightningSurgeCapabilityWaveform8/20waveformLightningSurgeCurrent 10kA

    Product SpecificationsProduct SpecificationsE15S08P93E15S08P93

    2013CommScope, Inc. All rights reserved. All trademarks identified by 2013CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks, respectively, of CommScope.or are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: April 23, 2012All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: April 23, 2012

    page 2 of 5page 2 of 5 June 4, 2013June 4, 2013

  • Block Diagram

    Mechanical Specifications ConnectorInterface 716DINFemaleConnectorInterfaceStyle LongneckGroundScrewDiameter 8.00mmAISGConnectorStandard IEC601309Finish PaintedColor GrayMountingPipeHardware BandclampsMountingPipeDiameter 40160mm

    Environmental Specifications OperatingTemperature 40Cto+65C(40Fto+149F)RelativeHumidity Upto100%IngressProtectionTestMethod IEC60529:2001,IP67

    Dimensions Height 188.0mm | 7.4inWidth 170.0mm | 6.7in

    Product SpecificationsProduct SpecificationsE15S08P93E15S08P93

    2013CommScope, Inc. All rights reserved. All trademarks identified by 2013CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks, respectively, of CommScope.or are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: April 23, 2012All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: April 23, 2012

    page 3 of 5page 3 of 5 June 4, 2013June 4, 2013

  • Depth 50.0mm | 2.0inVolume 1.6LWeight 3.3kg | 7.3lb

    Product SpecificationsProduct SpecificationsE15S08P93E15S08P93

    2013CommScope, Inc. All rights reserved. All trademarks identified by 2013CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks, respectively, of CommScope.or are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: April 23, 2012All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: April 23, 2012

    page 4 of 5page 4 of 5 June 4, 2013June 4, 2013

  • Outline Drawing

    Regulatory Compliance/CertificationsAgency ClassificationISO9001:2008 Designed,manufacturedand/ordistributedunderthisqualitymanagementsystem

    Product SpecificationsProduct SpecificationsE15S08P93E15S08P93

    2013CommScope, Inc. All rights reserved. All trademarks identified by 2013CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks, respectively, of CommScope.or are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: April 23, 2012All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: April 23, 2012

    page 5 of 5page 5 of 5 June 4, 2013June 4, 2013