E O LEEDS V - · PDF fileLBX-353 Spacer for U-DO to U-MDO B-6 ... LMS-150 Heavy boom base &...
Transcript of E O LEEDS V - · PDF fileLBX-353 Spacer for U-DO to U-MDO B-6 ... LMS-150 Heavy boom base &...
w w w . l e e d s m i c r o . c o mw w w . l e e d s m i c r o . c o m
EXPERIENCE
OUR
VISION
EXPERIENCE
OUR
VISIONL E E D SL E E D S
A F u l l S p e c t r u m o f C u s t o m P r o d u c t s
January 2011
T a b l e o f C o n t e n t sBX & BH2 AccessoriesPart Number DDeessccrriippttiioonn PPaaggee NNuummbbeerr55--SS111199FFOO BH2/BX Adapter for Flexible Fiber Lightguide Adapter BB--226655--UULL11003355MM U-LS30-4 - With Socket Reflector BB--2233LLBBXX--000011 Condenser flip-top lever extension for the BX45 BB--11LLBBXX--000011--22 Condenser flip-top lever extension for the BX45 BB--2288LLBBXX--007722 Knob extension kit for BX stage BB--22LLBBXX--007755 Knob Extension Kit for BX/BX2 Rackless Stage BB--22LLBBXX--110000 Slider Housing BB--22LLBBXX--110022TT 5 Position Auxiliary Filter Wheel for the BX/BX2 and IX/IX2 BB--1177LLBBXX--111100 Tintplate Slider BB--33LLBBXX--115522 Dual View Support Stand Offset Mounting Bracket BB--2299LLBBXX--115555 Adjustable Support Bracket for the UDO BB--3300LLBBXX--221199 Rotatable Analyzer BB--33LLBBXX--222200 Rotatable Analyzer BB--33LLBBXX--330000 Low profile mount BB--55LLBBXX--330011 Adapter for BX to BH2/CH30 stand BB--66LLBBXX--335533 Spacer for U-DO to U-MDO BB--66LLBBXX--55RREE Adapter to mount BX40 nosepiece to the BX50 stand BB--77LLBBXX--BB--00115511 Telescoping support base BB--44LLBBXX--DD66RREE Adapter to mount U-R156 & U-R177 nosepieces to BX40 or BX45 BB--88LLBBXX--DDLLHH Dual lamphouse adapter BB--99LLBBXX--FFOOMMEETT Fiber optic lamphouse adapter BB--1100LLBBXX--HHYYBBRRIIDD Hybrid stand with 18" Z-axis range BB--1111LLBBXX--HHYYBBRRIIDD--RRSSMM Reflected light stage mount BB--1111LLBBXX--HHYYBBRRIIDD--SSZZXX Mount for SZX and SZX-FO/FOF focus unit BB--1111LLBBXX--HHYYBBRRIIDD--TTSSMM Transmitted light stage module BB--1111LLBBXX--NNEEOO NEO Thread for BX/BX2 BB--1122LLBBXX--RRMMSS RMS standard thread for BX/BX2 BB--1122LLBBXX--UU--EEPPAA BX/BX2 Height adjusting adapterLLCCTT--UUPPOOLL--SSLL Condenser with Polarizer on Slider BB--2244LLMMAA--000011 Condenser extension handle BB--1133LLMMNN--NNEEOO NEO thread for BH2 BB--1122LLMMNN--RRMMSS RMS standard thread for BH2 BB--1122LLPPII--11XXCCSS2255 1X C-Mount Adapter/Uniblitz Shutter BB--1188LLPPII--BBXX22FFXXWW BX2 White Ceramic Coated Fixed Stage BB--2277LLPPII--BBXX22GGLLDDEE Glide Stage for BX/BX2 Frames BB--2222LLPPII--CCTTRR11XX Centerable 1x C-mount adapter BB--1188LLPPII--DDTTRRUU Dual Photo Port Adapter BB--1199LLPPII--MM3344--MM2255 Thread Adapter - M34 to M25 BB--2211LLPPII--MM3344--RRMMSS Thread Adapter - M34 to RMS BB--2255LLPPII--SSRRGGLLCC 240º Circular Pol Stage BB--2200LLPPII--UU--IITT113344 1" Extension Tube for the U-IT134 BB--1166LLPPII--UU--UUCCLLHH Collector lens assembly BB--1100LLPPII--UU--VV331111SSLL 1X C-mount adapter with slider allows for a filter to be inserted into the camera’s raypath. BB--1188LLPPII--WWII--XXYYMM22 2x3, X-Y translation base for BX51WIF BB--1155LLPPII--WWII--XXYYMM22MMOOTT Motorized 2x2, X-Y translation base for BX51WIF BB--1155SSHHMM00000000--LL Single shim for NEO size thread BB--1144SSHHMM00000000--SS Single shim for RMS size thread BB--1144SSHHMM--NNEEOO Set of 70 shims for NEO size thread BB--1144SSHHMM--RRMMSS Set of 70 shims for RMS size thread BB--1144
StereoPart Number Description Page NumberLLMMAA--003366AA Drop prevention collar SS--11LLMMSS--115500 Heavy boom base & 24” column SS--11LLMMSS--115511 Horizontal arm assembly SS--11LLMMSS--119977 14” Vertical column with table clamp SS--11LLMMSS--119977--2244 24” Vertical column with table clamp SS--11LLMMSS--119988 14” Vertical column with flange mount SS--11LLMMSS--119988--2244 24” Vertical column with flange mount SS--11LLMMSS--220000 Boom base & 14” column SS--11LLMMSS--220000--2244 Boom stand base & 24” column SS--11LLMMSS--220011 Ball bearing boom arm SS--11LLMMSS--330000 Articulating boom arm - double jointed fold away design SS--11LLMMSS--334400 BF/DF transillumination base SS--1100LLMMSS--334411 12V/50W variable power supply SS--1100LLMMSS--SSZZXX--33RREE Three place nosepiece for SZX-small SS--1111LLMMSS--SSZZXX--33RREE--LL Three place nosepiece for SZX-large SS--1111LLMMSS--SSZZXX--33RREE--LLMM Three place nosepiece for SZX-large with macro positions SS--1111LLMMSS--SSZZXX--33RREE--MM Three place nosepiece for SZX-small with macro positions SS--1111LLMMSS--SSZZXXBBIIFFOO Adapter for 8520 to SZX stand SS--1122LLMMSS--SSZZXXBBPP SZX Bonder Post Mount SS--1122LLMMSS--SSZZXX--OOAAXX Off axis light attachment for SZX stereo microscope SS--1133LLPPII--KKSSTTAANNDD K Stand base for bonder arm SS--1144LLSSZZ--11XXCCMMTT22 1X C-Mount for SZ61TR. SS--1155LLSSZZ--11XXSSZZ6611 Removal of .5X lens SS--1155LLSSZZ--UU--SSPPTT PE Tube for SZ-6145TR SS--1155LLMMSS--220022--HHBBPP Crank Boom stand with heavy base SS--1166LLMMAA--005588 Inclination joint kit SS--22LLMMSS--SSZZXX22BBPP Bonder Post Mount SS--2200LLPPII--AANN--LLEEDD Polarizer for SZX2-ILLT LED Base SS--2211LLMMSS--TTIILLTT Tilting and adjustable base SS--2222LLMMSS--ZZ--CCRRKK1144 Z-Axis Crank Post for Olympus STU2 Boom Stand SS--2233LLMMSS--ZZ--CCRRKK1144LL Z-Axis Crank Post for the Leeds Boom Stand Bases SS--2233LLPPII--UUVVCCHHLLRR Universal C-Shaped Holder SS--2244LLMMSS--SSZZXX--MMAACC1100 SZX10 Objective Mount with on Axis Shift SS--2255LLMMSS--SSZZXX--MMAACC1166 SZX16 Objective Mount with on Axis Shift SS--2255LLMMSS--330000BBIIFFOO Mount for A08520 to LMS-300 SS--2266LLMMSS--770000 Adjustable Height Stage Mount SS--2299LLMMAA--005599 Adapter for Nicholas to S-0129A base SS--33LLMMAA--005599MM--55//88IIDD Adapter for F.O. light guide w/spot lens to S-0129A base SS--33
LLPPII--AAOO88006600 Ferrule Adapter for 10mm light guide to Olympus SZX 12mm. SS--3300LLPPII--LLEEDD--SSHH Stage Mount for BH2-SH Stage to SZX2-ILLT SS--3311LLPPII--SSIICCPPGG Metal Plate with glass for SIC4 and BH2-SH Stages SS--3311LLMMSS--335500SSZZ Retractable Arm for the SZ/SZ2 bonder mount SS--3322LLMMSS--335500SSZZXX Retractable Arm for the SZX SS--3322
LLMMSS--222255LLEEDDSSLL LED Transmitted Light Base W/Sliding Mirror for SZ2-ST Stand SS--3333LLMMSS--LLEEDDSS LED Spot Light only for LMS-225LED SS--3333LLMMSS--LLEEDDSSKK LED Spot Light Kit, Including Base, Arm & Power Control SS--3333LLMMSS--SSZZXX1166--OOAAXX Off axis light attachment for the SZX16 stereo microscope SS--3344LLMMAA--006600 SZ thread adapter SS--44LLMMAA--006611 Ferrule for Dolan Jenner 180 SS--44LLMMAA--006633 Ferrule for Fostec SS--44LLMMAA--006655 Ferrule for Olympus SS--44LLMMAA--006666 Ferrule for Chiu SS--44LLPPII--111122 Polarizer/analyzer attachment SS--44LLRRLL--441100 High clearance ringlight - 4-ft length SS--44LLMMSS--110000 Boom stand SS--55LLMMSS--222255RR Transmitted light base (6v 20w halogen) SS--66LLMMSS--222266 7 watt fluorescent transmitted light base SS--66LLMMSS--222255WW Transmitted light base (6v 20w halogen) SS--77LLMMSS--222266WW 7 watt fluorescent transmitted light base SS--77LLMMSS--223300 BF/DF/oblique mirror base SS--88LLMMSS--223322 32mm post mount SS--88LLMMSS--SSZZXX--RR Drop prevention collar SS--88LLMMSS--223355 BF/Oblique mirror base SS--99
Part Number Description Page NumberBBXX--DDLLHH Dual lamphouse adapter BB--1100LLBBXX--22335522 360° rotatable analyzer slider with 32mm polarizer II--11LLBBXX--IIXX22MMIILL IX2 Metallurgical illuminator II--11LLBBXX--IIXXRROOTT--11XX33 1 x 3 slide rotator for IX/IX2 3-plate design stage II--33LLBBXX--IIXXRROOTT--11XX33//3355 1 x 3 slide & 35mm Petri dish rotator for IX/IX2 3-plate design stage II--33LLBBXX--IIXXRROOTT--11XX33//5500 1 x 3 slide & 50mm Petri dish rotator for IX/IX2 3-plate design stage II--33LLBBXX--IIXXSSLL X and Y Stage Lock for IX Stages II--66LLPPII--CCKKXX33PPLLTT 2x2 Three plate stage (Includes metal insert) II--22LLPPII--CCKKXX--TT9900 CKX condenser pillar 90° pivot modification II--44LLPPII--IIXX22AANNOO Blank 25mm Filter Slider for IX2-AN slot II--55LLPPII--IIXX22AANNOO--3322 Blank 32 mm Filter Slider for IX2-AN slot II--55
Part Number Description Page NumberLLMMSS--MMEEMMSS Specimen tilting plate for the MX-SIC8 MMXX--11
Part Number Description Page NumberLLPPII--CCXXSS CX/BX Swivel Head Mount CCXX--33LLPPII--CCXXTTEETT Tetrad kit and modification to CX31 or CX41 microscope CCXX--11LLPPII--CCXXUUDDOO Support brace for U-DO3 to CX31/41 frame CCXX--22
Part Number Description Page NumberRROOLLLLSSCCOOPPEE11OOTT 1-axis rollscope base with focusing optical tube RR--11RROOLLLLSSCCOOPPEE11SSDD 1-axis rollscope base with focusing arm and post mount RR--11RROOLLLLSSCCOOPPEE22OOTT 2-axis rollscope basewith focusing optical tube RR--11RROOLLLLSSCCOOPPEE22SSDD 2-axis rollscope base with focusing arm and post mount RR--11
Part Number Description Page NumberLLBBXX--HHYYBBRRIIDD MVX 10 Hybrid Stand MMVVXX--22LLMMSS--MMVVXX--33RREE Three place nosepiece for MVX10 MMVVXX--22LLPPII--DDPPPP Dual Photo Port Module MMVVXX--33LLPPII--MMVVXX--VV331111SSLL MVX 1X C mount adapter with filter slider MMVVXX--44
Part Number Description Page NumberLLFFVV--EEMMBBFFSS 18mm Filter holder for the FluoView 300 FFVV--11
Part Number Description Page NumberLLPPII--ZZ++BBXXAARRMM BX2 Optical Arm ZZ--22LLPPII--ZZ++KKOOEE Köhler Illimination Module ZZ--22LLPPII--ZZ++RRFFAA1166 Fluorescence Illuminator ZZ--11LLPPII--ZZ++RRFFAARRMM RFA16 Optical Arm ZZ--11
Part Number Description Page NumberSimple Copy Stand CC--11
Part Number Description Page NumberLLPPII--BBXX5511ZZHHEE Z-Axis Linear Encoder with .5um resolution. MMSS--11LLPPII--DDRROO33QQCC 3-Axis QC-130 Digital Readout with RS232 output. MMSS--11LLPPII--SSFFHHFF2255 Video Inspection System MMSS--22LLPPII--SSFFHHFF2255 Video Inspection System MMSS--22LLPPII--SSFFHHFF2255AAIIOO All in One Video Inspection System MMSS--33
LLPPII--SSIICC44LLEE--..55UUMM 2-Axis Linear Encoders with .5um resolution on Olympus U-SIC4R2 MMSS--11
Inverted
CX
Rollscope
MVX 10
FluoView
Z Plus
Simple Copy Stand
Measuring Systems
MX
BX & BH2 Accessories
Custom Accessories by Leeds
BX45
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
Extension Handle for Swing-OutCondenser
The LLBBXX--000011 simple extension handle makes it easierto reach and operate the swing-out condenser knoblocated underneath the stage.
The LLBBXX--000011 extension handle fits the swing-out typecondenser on the BBXX4455 stand.
OOrrddeerr PPrroodduucctt NNuummbbeerr
LLBBXX--000011 Condenser flip-top lever extension for the BBXX4455
The LLBBXX--000011 shown mounted onBBXX4455 condenser.
The LLBBXX--000011 extension handle
B-1
Custom Accessories by Leeds
Knob Extension Kits for BX Stage
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
The LLBBXX--007722 and LLBBXX--007755 knob kit extends the lengthof the low coaxial control knobs on BX stage by oneinch. It also provides larger diameter control knobs forbetter ergonomic situations.
The LLBBXX--007722 kit includes two knobs that snap onto theexisting knobs of a BBXX stage and an extension knob forthe x-axis tension control on a rack stage.
The LLBBXX--007755 kit also includes two knobs that snap ontothe existing knobs of a BBXX//BBXX22 rackless stage.
LLBBXX--007722 SSttaaggeess wwiitthhRRaacckk aanndd PPiinniioonn ddrriivveess
U-SVRSU-SVLS
U-SVRDTU-SVLDTU-SVRSBU-SVLSB
U-SVRDTBU-SVLDTB
LLBBXX--007755 SSttaaggee wwiitthhRRaacckklleessss ddrriivvee
U-SVRB-4U-SVLB-4U-SVROU-SVLO
OOrrddeerr PPrroodduucctt NNuummbbeerr
LLBBXX--007722 Knob extension kit for BBXX Rack Drive stage
LLBBXX--007755 Knob extension kit for BBXX//BBXX22 Rackless stage
LLBBXX--007722
The LLBBXX--007722 shown mounted on a BBXX stage
B-2
BX/BX2
LLBBXX--007755The LLBBXX--007755 shownmounted on arackless stage
Custom Accessories by Leeds
Gout / Pseudo Gout and SimplePolarizing Accessories
BX
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
LLBBXX--110000
LLBBXX--111100
LLBBXX--221199 aanndd LLBBXX--222200
Leeds offers polarizing accessories design for theOlympus BB--MMAAXX series of microscopes. Most are usedwith the BBXX 4400, which does not have an integral sliderslot in the nosepiece like the BBXX 5500.
The LLBBXX--110000 housing holds an analyzer/tintplate or ananalyzer, and installs between the observation tube andthe BBXX 4400 stand.
The LLBBXX--111100 analyzer/tintplate (also known as full waveplate) is for gout/pseudo gout analysis, or can be usedfor simple polarization. It offers 90o rotation with a leverand also fits in the slider slot of Olympus model UU--DD66RREE and UU--DD77RREE nosepieces.
The LLBBXX--221199 360o rotatable analyzer slider. Fits intoLLBBXX--110000 or the slider slot of Olympus model UU--DD66RREEand UU--DD77RREE nosepieces.
The LLBBXX--222200 360o rotatable ¼ wave plate slider whichfits into LLBBXX--110000 on the slider slot of Olympus model UU--DDRREE and UU--DD77RREE nosepieces.
MMooddeell SSoouurrccee SSiimmppllee PPooll RRoottaattaabbllee PPooll GGoouutt//PPsseeuuddoo GGoouutt BBXX4400 BBXX5500//CCXX4400 BBXX4400 BBXX5500//CCXX4400 BBXX4400 BBXX5500//CCXX4400
LLBBXX--110000 Slider Housing Leeds X X X LLBBXX--111100 Tintplate Slider Leeds X XLLBBXX--221199 Rotatable Analyzer Leeds X XAAQQ00663344 Blank Slider Olympus X XUU--PP111155 Analyzer Olympus X XUU--PP111100 Polarizer Olympus X X X X X X
B-3
Custom Accessories by Leeds
Dual-View Support Bracket
BX & BH2
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
The LLBBXX--115511 bracket when combined with the Olympus BB--00115511 dual-view telescoping support base, allows forsupport of OOllyymmppuuss UU--DDOO dual observation attachmentwhen it is used in a side arm position (instead of front toback).
LLBBXX--BB--00115511 Telescoping support base provides for ataller support with a height range of 11 5/8” to 20”.
OOrrddeerr PPrroodduucctt NNuummbbeerr
LLBBXX--115511 BracketLLBBXX--BB--00115511 Telescoping support base
LLBBXX--115511
LLBBXX--BB--00115511
B-4
Custom Accessories by Leeds
Low Profile Mount for TiltingBinocular Head
BX
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
The LLBBXX--330000 low profile mount enables full field viewing when stacked-up accessories are used on theBB--MMaaxx series of Olympus microscopes. It recovers20mm of the maximum 109mm allowable stack height.This allows for greater flexibility when adding adualview accessory, polarizing housing or other stack-up accessories - all without loss of viewing area. The lowprofile mount is ergonomically designed by keeping themicroscope height minimal.
The LLBBXX--330000 mount easily attaches to the binocular.This head replaces the mount housing on the OlympusUU--TTBBII inclinable binoc head. (On more recent tilt head mod-els, the cylindrical glass must be removed.)
The Leeds customization differs for the Olympus 33--UU113366 tilt head in the following ways:
• Head I.P.D. folds down rather than up• Diopter remains on left side• Tilt height range is 25mm lower• The 33--UU113366 recovers 17mm more stack
height than the LLBBXX--330000 combination
OOrrddeerr PPrroodduucctt NNuummbbeerr
LLBBXX--330000 Low profile mount
LBX-300
The LBX-300 mountedon a UU--TTBBII head
B-5
Custom Accessories by Leeds
Height Adjusting Adapter
BX
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
The LLBBXX--UU--EEPPAA adapter is used when the operatorneeds the height of the eyepieces raised to acomfortable, relaxed sitting position. The adaptermounts between the microscope stand and observationhead and raises height by 30mm with a 1x magnification factor.
If needed, two or three adapters can be stacked to create a ergonomical sitting position. With theLLBBXX--335533 adapter a Olympus UU--DDOO can be stacked ontop of a UU--MMDDOO.
The LLBBXX--330011 looks like the LLBBXX--335533,, but with thisadapter the Olympus BB--MMaaxx components can bestacked on top of a BBHH22 or CCHH3300 stand.
OOrrddeerr PPrroodduucctt NNuummbbeerr
LLBBXX--UU--EEPPAA BBXX//BBXX22 Height adjusting adapterLLBBXX--335533 Spacer for UU--DDOO to UU--MMDDOOLLBBXX--330011 Adapter for BBXX to BBHH22//CCHH3300 stand
LLBBXX--UU--EEPPAA
LLBBXX--335533
B-6
Custom Accessories by Leeds
BX
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
BX40 Nosepiece Adapter for theBX50 Stand
OOrrddeerr PPrroodduucctt NNuummbbeerr
LLBBXX--55RREE Adapter to mount BBXX4400 nosepieceto the BBXX5500 stand
The LLBBXX--55RREE adapter allows the 5 place nosepiecefrom a BBXX4400 stand to be used on a dovetail stylemount on the BBXX5500 stand.
When cost is an issue, the LLBBXX--55RREE adapter makes itpossible to use a less expensive nosepiece.
LLBBXX--55RREE
Shown mounted on a BBXX 4400 nosepiece
B-7
Custom Accessories by Leeds
BX
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
Nosepiece AdapterThe Leeds nosepiece adapter allows for the use of asix-place or seven-place nosepiece on a BBXX4400 or BBXX4455microscope.
Combining the LLBBXX--DD66RREE nosepiece adapter with theOlympus UU--RR115566 (UU--DD66RREE)) six-place nosepiece, or the UU--RR117777 (UU--DD77RREE)) seven-place nosepiece, creates a replacement for the five-place nosepiece - which is thestandard nosepiece for the BBXX4400 and BBXX4455. BBXX4400frames need to be sent to Leeds Minneapolis office forthe U-R177 Nosepiece.
The LLBBXX--DD66RREE adapter replaces the dovetail mount ofthe UU--RR115566 and UU--RR117777 nosepieces. The adapter alsoprovides an integrated slot for slider accessories -which eliminates the need for a slider housing on theBBXX4400. The LLBBXX--DD66RREE adapter also adds a second slotfor slider accessories on the BBXX4455 stand.
The LLBBXX--66RREE and the UU--RR110066 should be used on theOlympus BX45 stand when only one slider is needed.
OOrrddeerr PPrroodduucctt NNuummbbeerr
LLBBXX--DD66RREE Adapter to mount UU--RR115566 & UU--RR117777 nosepieces to BBXX4400 or BBXX4455
LLBBXX--66RREE Adapter to mount UU--RR110066,, one slider, to the BBXX4455
LLBBXX--DD66RREE
Shown mounted in UU--RR115566 nosepiece
B-8
Custom Accessories by Leeds
Dual Lamphouse Adapter
BX
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
The Dual lamphouse adapter allows for the usage oftwo light sources on one microscope system.
For use with: Reflected light illuminators. BBXX//BBXX22and IIXX//IIXX22 stands.
It is easy to switch from one light source to the otherwith the turn of a knob. The indicator arrows on theknob shows which light source is selected.
OOrrddeerr PPrroodduucctt NNuummbbeerr::
LLBBXX--DDLLHH Dual lamphouse adapter
LLBBXX--DDLLHH
B-9
Custom Accessories by Leeds
Fiber Optic Lamphouse Adapter
BX
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
The LLBBXX--FFOOMMEETT allows for the use of fiber optictype lighting with reflected light illuminators on theBBXX//BBXX22 and IIXX//IIXX22 stands.
OOrrddeerr PPrroodduucctt NNuummbbeerr::
LLBBXX--FFOOMMEETT Fiber optic lamphouse adapter
(The adapter is designed for a fiber optic bundle with a ferrule diameter of .393” x 1 ¼” length. The adapter requires usageof the LLPPII--UU--UUCCLLHH collector lens assembly).
LLPPII--UU--UUCCLLHH Collector lens assembly
LLBBXX--FFOOMMEETT
LLPPII--UU--UUCCLLHHcollector lens(not included)
B-10
Custom Accessories by Leeds
Hybrid Stand
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
Hybrid Stand The Leeds LLBBXX--HHYYBBRRIIDD hybrid stand has 18" of travel in theZ-axis, which is all done on ball bearing sleeves with counter balanced springs. This design allows for ease inmoving the microscope components out of the way forloading or unloading specimens, or just positioning for different height objects - such as whole animals or metallurgical samples. The LLBBXX--HHYYBBRRIIDD also has anadjustable stop for returning the microscope back to a predetermined position after loading a specimen.
The LLBBXX--HHYYBBRRIIDD stand is designed to be used withOlympus items: BBXXFFMM--FF focus module, BBXXFFMM--IILLHH mountand any of the BX2 reflected light brightfield/darkfield andfluorescence illuminators.
The LLBBXX--HHYYBBRRIIDD--RRSSMM mount is designed for using areflected light stage on the LLBBXX--HHYYBBRRIIDD stand.
The LLBBXX--HHYYBBRRIIDD--TTSSMM module is to be used with the BBXX22condensers and transmitted light stages on the LLBBXX--HHYYBBRRIIDD stand. This module is a Koehler transmittedlight illumination system that requires the use of a BBXX22lamphouse and an external power supply. It can also beused with a fiber optic light system.
The LBBXX--HHYYBBRRIIDD--SSZZXX mount allows for the use of the SSZZXXstereoscope and SSZZXX--FFOO//FFOOFF focus unit to be used withthe LLBBXX--HHYYBBRRIIDD stand.
The combination of the hybrid stand and the manyOlympus modular components make for a versatile microscope for viewing a variety of size of specimens.
The Leeds LLBBXX--HHYYBBRRIIDD hybrid stand
OOrrddeerr PPrroodduucctt NNuummbbeerr
LLBBXX--HHYYBBRRIIDD Hybrid stand with 18" Z-axis range
LLBBXX--HHYYBBRRIIDD--RRSSMM Reflected light stage mount
LLBBXX--HHYYBBRRIIDD--TTSSMM Transmitted light stage module
LLBBXX--HHYYBBRRIIDD--SSZZXX Mount for SZX and SZX-FO/FOF focus unit
B-11
Custom Accessories by Leeds
Single Objective Nosepiece
BX/BX2 & BH2
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
The Leeds single objective nosepiece adapters providean option when only a single objective is needed on aBBHH22 or BBXX//BBXX22 series microscope. They replace the multiple place nosepiece normally used.
They are available for RMS or NEO thread and installationis simple: the adapters are designed to slide into thenosepiece dovetail of the BBHH22 or BBXX//BBXX22 series microscope stand.
OOrrddeerr PPrroodduucctt NNuummbbeerr
LLMMNN--RRMMSS RMS standard thread for BH2LLMMNN--NNEEOO NEO thread for BH2
LLBBXX--RRMMSS RMS standard thread for BX/BX2LLBBXX--NNEEOO NEO Thread for BX/BX2
LLMMNN--NNEEOO
LLBBXX--RRMMSS
LLBBXX--NNEEOO
B-12
Custom Accessories by Leeds
Extension Handle for Swing-Out Condenser
BH2, BX/BX2
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
The LLMMAA--000011 simple extension handle makes it easier toreach and operate the swing-out condenser knob located underneath the stage.
The LLMMAA--000011 extension handle fits the swing-out typecondenser on the BBHH22,, BBXX//BBXX22 stand.
OOrrddeerr PPrroodduucctt NNuummbbeerr
LLMMAA--000011 Condenser extension handle
LLMMAA--000011
AAnn LLMMAA--000011 mmoouunntteedd oonnccoonnddeennsseerr
AAnn LLMMAA--000011 mmoouunntteedd oonn aa ccoonnddeennsseerr oonn aa BBXX4411 ssttaanndd
B-13
Custom Accessories by Leeds
Parfocaling Shim Set
BX & BH2
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
The Leeds parfocal shim set can aid in bringing a set of objectives into parfocality on a microscope.
The brass or stainless steel shims fit over the RMS orNEO thread of the objective.
Each shim set contains ten each of seven different thicknesses of shims. Thicknesses are (in inches):.001, .002, .003, .004, .005, .007, .010.
Available for RMS or NEO thread size.
OOrrddeerr PPrroodduucctt NNuummbbeerr
SSHHMM--RRMMSS Set of 70 shims for RMS size threadSSHHMM--NNEEOO Set of 70 shims for NEO size thread
Separately for refill or extras:SSHHMM00000000--SS Single shim for RMS size threadSSHHMM00000000--LL Single shim for NEO size thread(specify thickness desired with part number)
RMS Size Shims
NEO Size Shims
B-14
BX51WIF
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
2”x3” Translation Base
The LLPPII--WWII--XXYYMM22 2”x3", X-Y translation base allowsthe movement of the microscope frame without moving the specimen on electrodes. Useful for multiple patch clamping experiments.
Can be mounted to any breadboard with a 1/4-20 x 1"mounting hole pattern. 99 11//22””xx 1166”” ffoooottpprriinntt..
Motorized model requires 560-HP1PC1 PCI controllercard and computer.
OOrrddeerr PPrroodduucctt NNuummbbeerr
LLPPII--WWII--XXYYMM22 2x3, X-Y translation base for BX51WIF.
LLPPII--WWII--XXYYMM22MMOOTT Motorized 2x2, X-Y translation base for BX51WIF.
556600--HHPP11PPCC11 PCI controller card
LLPPII--WWII--XXYYMM22 2x3, X-Y translation base
B-15
Custom Accessories by Leeds
Custom Accessories by Leeds
BX
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
1" Extension Tube for the U-IT134
OOrrddeerr PPrroodduucctt NNuummbbeerr
LLPPII--UU--IITT113344 1” Extension tube for U-IT134 side camera port
LLPPII--UU--IITT113344 Pictured on a BBXX4411
The LLPPII--UU--IITT113344 1" extension tube, when added tothe UU--IITT113344 side camera port, will allow for moreclearance for a larger body camera.
LLPPII--UU--IITT113344
B-16
Custom Accessories by Leeds
BX/BX2 & IX/IX2
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
5 Position Auxiliary Filter Wheel forthe BX/BX2 and IX/IX2
BBXX5511WWII
LLBBXX--110022TT
25mm adapter rings included
The LLBBXX--110022TT filter turret allows for up to 5 filters,25mm or 32mm diameter, to be rotated into the opticalraypath on any BBXX//BBXX22 or IIXX//IIXX22 microscope frame.It mounts under the observation tube and adds 18mmto the microscope stack height.
OOrrddeerr PPrroodduucctt NNuummbbeerr
LLBBXX--110022TT 5 Position auxiliary filter wheel for the IX and BX.
LLBBXX--110022TT
B-17
Custom Accessories by Leeds
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
1X C-Mount Adapters
LLPPII--CCTTRR11XXThe LLPPII--CCTTRR11XX centerable 1x C-mountadapter provides for a greater rangeof adjustment when centering a camera.
UU--VV1111111x camera adapter with no lens -
requires camera mount
LLPPII--UU--VV331111SSLLThe LLPPII--UU--VV331111SSLL 1X C-mount adapterwith slider allows for a filter to beinserted into the camera’s raypath.Adding a filter in this position when in the camera’s raypath will affect parfocality.UU--VV331111
Olympus C-mount camera adapter
LLPPII--11XXCCSS2255The LLPPII--11XXCCSS2255 1X C-mount
adapter enables the use of a CCSS2255series Uniblitz shutter in the camera’s raypath.
The Leeds custom application 1X C-mount adapters aredesigned to be used instead of the Olympus UU--VV331111((UU--CCMMAADD)) C-mount adapter. The Leeds custom C-mountadapters require the use of the Olympus UU--VV111111 (UU--TTVV11XX--22))adapter.
B-18
Custom Accessories by Leeds
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
Dual Photo Port Adapter
OOrrddeerr PPrroodduucctt NNuummbbeerr
LLPPII--DDTTRRUU Dual photo port
LLPPII--DDTTRRUU pictured on a BBXX4411 with a OOLLYY--220000 and a DDPP--7700..
The LLPPII--DDTTRRUU Dual Photo Port Adapter allows for twocameras to be used without having to remove one andinstall another. This photo adapter has three light paths:100% light for the 33--UU113377 binocular observation tube or 20%for the binocular observation tube, and 80% for the rightphoto port or 80% for the left photo port.
LLPPII--DDTTRRUU
B-19
Custom Accessories by Leeds
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
240o Circular Pol Stage
LLPPII--SSRRGGLLCC on a BBXX4411
The LLPPII--SSRRGGLLCC low control mechanical stageis for the Olympus SSRRGG22 circular rotating centerable pol stage. The LLPPII--SSRRGGLLCC has240º of rotation and offers greater ergonomics when attached to the OlympusSSRRGG22 stage.
LLPPII--SSRRGGLLCC
OOrrddeerr PPrroodduucctt NNuummbbeerr
LLPPII--SSRRGGLLCC 240º low control mechanical circular polstage
B-20
Custom Accessories by Leeds
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
Thread Adapter
The LLPPII--MM3344--MM2255 thread adapter allows for the 11--UUBB994477 or 11--UUBB995500 2X and 4X macro objectives to fitthe UU--RR11000022 WWII--SSNNPPXXLLUU single position nosepiece .
OOrrddeerr PPrroodduucctt NNuummbbeerrLLPPII--MM3344--MM2255 Thread Adapter - M34 to M25
LLPPII--MM3344--MM2255
B-21
Custom Accessories by Leeds
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
OOrrddeerr PPrroodduucctt NNuummbbeerr
LLPPII--BBXX22GGLLDDEE Glide Stage for BX/BX2 FramesLLPPII--BBXX22GGLLDDEE--WW Glide Stage for BX/BX2 Frames-
White Ceramic Coated
Glide Stage for the BX/BX2
LLPPII--BBXX22GGLLDDEE Stage shown on a Olympus BX41
LLPPII--BBXX22GGLLDDEE Glide Stage
LLPPII--BBXX22GGLLDDEE--WW White Ceramic Coated Glide Stage
The LLPPII--BBXX22GGLLDDEE Glide Stageallows for the positioning of thespecimen by hand without theuse of XY controls.
B-22
Custom Accessories by Leeds
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
OOrrddeerr PPrroodduucctt NNuummbbeerr
55--UULL11003355MM UU--LLSS3300--44 - With Socket Reflector
5-UL1035M Socket With Reflector
The 55--UULL11003355MM allows for 10%more light to be reflected to the specimen.
55--UULL11003355MM on the Olympus BX41
55--UULL11003355MM
B-23
Custom Accessories by Leeds
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
OOrrddeerr PPrroodduucctt NNuummbbeerrLLCCTT--UUPPOOLL--SSLL 66--UU331100 Condeser and Slider
Modification
LCT-UPOL-SL Condenser withPolarizer on Slider
The LLCCTT--UUPPOOLL--SSLL allows for a quick removal of the polarizer unitfrom the transmitted light raypath, which increases light intensityby 2/3 and extending the life of the polarizer (the 66--UU331100 isincluded with the LLCCTT--UUPPOOLL--SSLL).
B-24
Custom Accessories by Leeds
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
OOrrddeerr PPrroodduucctt NNuummbbeerr
LLPPII--MM3344--RRMMSS Thread Adapter - M34 to RMS
Thread Adapter - M34 to RMS
The LLPPII--MM3344--RRMMSS adapter allows for a second objective with RMSthread to be mounted in the M34 thread position of OOllyymmppuussUU--RR117755 UU--SSLLRREE slider nosepiece. The LLPPII--MM3344--RRMMSS adapteradapter can be adjusted for parfocality.
LLPPII--MM3344--RRMMSS
B-25
Custom Accessories by Leeds
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
BH2/BX Adapter for Flexible FiberLightguide Adapter
The Leeds 55--SS111199FFOO BH2/BX adapter for flexiblefiber lightguides, allows for the Schott ACE seriesfiber light sources to be used in place of theOlympus Lamphouse on the BBXX aanndd BBHH series ofmicroscopes.
55--SS111199FFOO pictured on the Olympus BX41
55--SS111199FFOO
OOrrddeerr PPrroodduucctt NNuummbbeerr
55--SS111199FFOO BH2/BX Adapter for Flexible Fiber Lightguide Adapter
B-26
Custom Accessories by Leeds
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
BX White Ceramic Coated FixedStage
The Leeds LLPPII--BBXX22FFXXWW Stage is mounted in a fixedposition and coated with a durable white ceramic foreasier viewing and movement of the slide on the stageby hand.
The round compact design of the stage has bevelededges for a more comfortable hand placement.
LLPPII--BBXX22FFXXWW pictured on the OOllyymmppuuss BBXX4411
LLPPII--BBXX22FFXXWW
OOrrddeerr PPrroodduucctt NNuummbbeerr
LLPPII--BBXX22FFXXWW BX2 White Ceramic Coated Fixed Stage
B-27
Also available in black
Custom Accessories by Leeds
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
Extension Handle for Swing-OutCondenser for the BX45
The LLBBXX--000011--22 simple extension handlemakes it easier to reach and operate theswing-out condenser knob locatedunderneath the stage.
The LLBBXX--000011--22 extension handle fits theswing-out type condenser on the BBXX4455stand.
OOrrddeerr PPrroodduucctt NNuummbbeerr
LLBBXX--000011--22 Condenser flip-top lever extension for the BBXX4455
The LLBBXX--000011 extension handle
B-28
Custom Accessories by Leeds
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
Dual View Support Stand OffsetMounting Bracket
The Leeds LLPPII--115522 Dual ViewSupport Stand Offset MountingBracket allows for four inchesof 360° movement for betterplacement of the support standbase on the work surface.
LLBBXX--115522 pictured on the LLeeeeddss LLBBXX--BB--00115511
LLBBXX--115522 wwiitthh bboolltt
OOrrddeerr PPrroodduucctt NNuummbbeerr
LLBBXX--115522 Dual View Support Stand Offset Mounting Bracket
B-29
Custom Accessories by Leeds
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
Adjustable Support Bracket for theUDO
OOrrddeerr PPrroodduucctt NNuummbbeerrLLBBXX--115555 Adjustable Support Bracket for the UDO
LLBBXX--115555 shown on the Olympus BX41 with UU--IITT111100magnification changer
LLBBXX--115555
The LLBBXX--115555 attaches to theOOllyymmppuuss UUDDOO and allows for 32mm -50mm of adjustment support when a intermitted piece isplaced before theUUDDOO. The LLBBXX--115555 protects the dovetailfrom damage and eliminates vibration for second the viewer.
B-30
Stereo
Custom Accessories by Leeds
STEREO
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
Leeds’ Custom Boom StandComponents for Stereo Microscopes
LLMMAA--003366AA Drop prevention collarLLMMSS--115500 Heavy boom base & 24” column
(2” x 10” x 16”, 105 lbs total weight) LLMMSS--115511 Horizontal arm assembly LLMMSS--119977 16” Vertical column with table clampLLMMSS--119977--2244 24” Vertical column with table clamp LLMMSS--119988 14” Vertical column with flange mountLLMMSS--119988--2244 24” Vertical column with flange mountLLMMSS--220000 Boom base & 14” column
(same as used on the LMS-100 complete stand) LLMMSS--220000--2244 Boom stand base & 24” columnLLMMSS--220011 Ball bearing boom arm provides for
smooth easy 21” horizontal movement along arm. It is designed to hold a bonder style focus mount with a 5/8” diameter post mount.
LLMMSS--330000 Articulating boom arm has a double jointed fold away design to save space atthe workstation and does not have a rear protrusion like the rigid boom arms have.It is made to fit any of the column assem-blies on this page. When measured from the center of column to center of “field of view” of an Olympus SSZZ stereoscope, the horizontal arm has a 24 ½” reach. This arm is designed to hold a bonder style focus mount with a 5/8” diameterpost mount.
LLMMAA--003366AA
FFoorr aa ccoommpplleettee bboooomm ssttaanndd yyoouu wwiillllnneeeedd::
1) Column assembly2) Drop prevention collar3) Arm assembly
LLMMSS--115500
LLMMSS--115511
LLMMSS--119977
LLMMSS--119988
LLMMSS--220000
LLMMSS--330000
LLMMSS--220011S-1
Custom Accessories by Leeds
STEREO
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
Inclination Joint for Olympus BonderFocus Mount
Unlike the stock OOllyymmppuuss SS--0022666622 and SS--00226666 focusmounts, which drops into the post mount of the boomarm, the modified Leed’s LLMMAA--005588 inclination joint ismounted from the underside of the boom arm and isheld securely in place with the provided drop prevention knob. The LLMMAA--005588 inclination jointenables the stereoscope to be held securely at anangle which can be moved by the operator to varioustilted positions and will stay in position until manuallymoved. Tension of tilt movement can be adjusted orlocked with a hex wrench. This inclination jointreplaces the standard knuckle joint of the SS--0022666622 andSS--00226666.
OOrrddeerr PPrroodduucctt NNuummbbeerr
LLMMAA--005588 Inclination joint kitSS--00226666MM Olympus bonder arm W/LLMMAA--005588
installed
SS--0022666622MM W/LLMMAA--005588 Installed
LLMMAA--005588
SS--00226666MM shown
S-2
Custom Accessories by Leeds
STEREO
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
Adapter for S-0129A TransmittedLight Base
The LLMMAA--005599 adapter allows a Nicholas style illuminator lamphouse to be used with the OlympusSS--00112299AA transmitted light base. The adapter pops intothe illuminator mounting hole in the back of the SS--00112299AA base.
The LLMMAA--005599MM--55//88IIDD adapter allows for a fiber optic bundle with a 5/8” diameter spot lens to be used withthe Olympus SS--00112299AA transmitted light base.
OOrrddeerr PPrroodduucctt NNuummbbeerr
LLMMAA--005599 Adapter for Nicholas to SS--00112299AAbase
LLMMAA--005599MM--55//88IIDD Adapter for F.O. light guide w/spot lens to SS--00112299AA base
S-3
LLMMAA--005599 Shown
Custom Accessories by Leeds
STEREO
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
High Clearance RinglightThe Leeds fiber optic ringlight maintains a full 4.2”working distance when mounted on an Olympus SSZZand SSZZ22 model stereoscopes. The narrow side profiledoesn’t interfere with hand or tool movement.
The Leeds ring light provides an even diffusion of lightwithout hot spots or holes. The fiber optic bundle,which is available in various lengths, exits upward tostay out of the field of motion.
The ringlight mounts quickly with a screw-on coupler,and your choice of ferrule (please note that all threeparts are necessary, and are ordered via separate partnumbers).
A polarizer/analyzer is an available option.
LLRRLL--441100
LLMMAA--006600
SSccrreeww--oonn eenndd ffoorr vvaarriioouuss ffeerrrruulleess
LLMMAA--006611
LLMMAA--006655
LLMMAA--006666
LLMMAA--006633
LLPPII--111122
OOrrddeerr PPrroodduucctt NNuummbbeerr
LLRRLL--441100 High clearance ringlight - 4-ft lengthLLMMAA--006600 SZ thread adapter
CChhoooossee aa ffeerrrruullee ttoo ffiitt yyoouurr lliigghhtt ssoouurrccee:: (others are alsoavailable, call for info).
LLMMAA--006611 Ferrule for Dolan Jenner 180LLMMAA--006633 Ferrule for FostecLLMMAA--006655 Ferrule for OlympusLLMMAA--006666 Ferrule for ChiuLLPPII--111122 Polarizer/analyzer attachment
S-4
Custom Accessories by Leeds
STEREO
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
Complete Boom Stereoscope Stand
To configure a stand that will meet your specific needs, pleasecheck our line of modular components described on page S-1.
The LLMMSS--110000 is used where wide horizontal and/or tallvertical viewing is needed. The LLMMSS--110000 is weighedand rigid with no need for a counter balance. The vertical column is 15 ¾” tall and is made of solid, nickel plated steel. When measured from the center ofcolumn to center of the field of view of an Olympus SSZZstereoscope, the horizontal arm has a 22 ¾” reach.The arm has a flat surface to prevent accidental rotation of the stereoscope body, and a drop prevention collar secures the vertical height of thestereoscope above the work surface - eliminating anyaccidents if you swing the horizontal arm to anotherposition. The arm is designed to hold a bonder stylefocus mount with a 5/8” diameter post mount. Thebase is 1” x 10” x 10” steel.
LLMMSS--110000
S-5
Custom Accessories by Leeds
STEREO
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
Transmitted Light Base for SZThe LLMMSS--222255RR self-contained tuck-under base for theOlympus SS--00112288 stereo stand clears up benchtop clutter and storage problems. It’s low-profile adds only1¾” to the height of the stand.
The base is a dual power supply for two light sources- 6-volt/20watt internal transmitted, and 6-volt/15-wattreflected illumination (designed for Olympus SS--00111155incident light illuminator). Both sources can be used atthe same time and have seperate level control switches.
The LLMMSS--222255RR uses a halogen light light source thatemploys a rheostat for intensity control of both transmitted and reflected light. The mirror unit can betilted to effect changes in lighting, which can fill thefield with light as low as a .9x zoom setting.
The LLMMSS--222266 unit fluorescent type light, mounted inthe base for transmitted illumination, it minimizesshadows (note that there is no mirror in this model).The base mounts under the SS--00112288 stand with twoscrews and can be easily installed with a 3mm ball hexwrench. A removable cover makes replacing the bulbeasy.
LLMMSS--222255RR base shown mounted on SS--00112288 stand with S-0115 reflected illuminator attached. The illuminatorbase comes with a stage glass anddiaphragm.
LLMMSS--222266 base contains a 7-watt fluorescent light source, as well as powerfor reflected light. The base comes with adiffusing stage plate.
OOrrddeerr PPrroodduucctt NNuummbbeerr
LLMMSS--222255RR Transmitted light base (6v 20w halogen)LLMMSS--222266 7 watt fluorescent transmitted light
baseSS--00111155 Olympus LLSSGGAA; low voltage incident
light illuminatorSS--00111155BB Thumb screw to attach LLSSGGAA illuminator
to SS--00112288 stand
S-6
Custom Accessories by Leeds
STEREO
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
Transmitted Light Base
The LLMMSS--222255WW self-contained tuck-under base for theOlympus SS--0011228822 stereo stand clears up benchtop clutter and storage problems. Its low-profile adds only1 ¾” to the height of the stand.
The base has a dual power supply for two light sources-6-volt/20 watt internal transmitted, and 6-volt/15-wattreflected illumination (designed for OOllyymmppuuss SS--00111155incident light illuminator). Both sources can be used atthe same time and have their own light level controlswitches.
The LLMMSS--222255WW uses halogen light and employs a rheostat for intensity control of both transmitted andreflected light. The mirror can be tilted to affect changesin lighting. It fills the field with light as low as .8x zoomsetting.
The LLMMSS--222266WW fluorescent type light mounts in the basefor transmitted illumination, which minimizes shadows. (Note: there is no mirror in this model.)
The base attaches under the SS--0011228822 stand with threescrews, and can be easily instal with a #1 crosspointscrewdriver. A removable cover makes replacing thebulb easy.
OOrrddeerr PPrroodduucctt NNuummbbeerrLLMMSS--222255WW Transmitted light base (6v 20w halogen).LLMMSS--222266WW 7 watt fluorescent transmitted light base.SS--00111155 Olympus LSGA; low voltage incident
light illuminator.SS--00111155BB Thumb screw to attach LSGA illuminator
to S-01282 stand.
LLMMSS--222255WW base shown mounted onSS--0011228822
LLMMSS--222255WW base comes with a clearglass stage plate and diaphragm
S-7
Custom Accessories by Leeds
STEREO
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
Bright Field/Dark Field TransmittedBase with Sliding Mirror
The Olympus SZX stereo microscope shown on theLeeds LLMMSS--223300 bright field/dark field base with slidingmirror for oblique lighting. Powered by 150W Fiberoptic light.
-- SSeelleeccttiioonn ddoonnee bbyy sslliiddeerr-- SSttaaggee ggllaassss iinncclluuddeedd
OOrrddeerr PPrroodduucctt NNuummbbeerr
LLMMSS--223300 BF/DF/oblique mirror base LLMMSS--223322 32mm post mount SS--00220044 400mm pillarLLMMSS--SSZZXX--RR Drop prevention collarAAOO88003311..4400RR Fostec light guideAA2200550000 Fostec light source
CCaann aallssoo bbee uusseedd wwiitthh SSZZ//SSZZ22sseerriieess sstteerreeoo mmiiccrroossccooppeess..
LLMMSS--223300 bright field/dark field basewith sliding mirror
S-8
Custom Accessories by Leeds
STEREO
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
Bright Field Transmitted Base withSliding Mirror
The Olympus SZX stereo microscope is shown on theLeeds LLMMSS--223355 bright field base with sliding mirror foroblique lighting. Powered by 150W fiber optic light.
-- SSeelleeccttiioonn ddoonnee bbyy sslliiddeerr-- SSttaaggee ggllaassss iinncclluuddeedd
OOrrddeerr PPrroodduucctt NNuummbbeerr
LLMMSS--223355 BF/Oblique mirror baseLLMMSS--223322 32mm post mountSS--00220044 400mm pillar LLMMSS--SSZZXX--RR Drop prevention collarAAOO88003311..4400 Fostec light guide AA2200550000 Fostec light source
CCaann aallssoo bbee uusseedd wwiitthh SSZZ//SSZZ22 sseerriieess sstteerreeoo mmiiccrroossccooppeess..
LLMMSS--223355 bright field base with slidingmirror.
S-9
Custom Accessories by Leeds
STEREO
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
12 Volt/50 Watt TransilluminationBase - Bright Field/Dark Field
The Olympus SZX stereo microscope shown on theLeeds LLMMSS--334400 bright field/dark field, 12 volt/ 50 watttransillumination base. Bright field/dark field selectionis done by a slide control. The glass stage plate isincluded.
CCaann aallssoo bbee uusseedd wwiitthh SSZZ//SSZZ22sseerriieess sstteerreeoo mmiiccrroossccooppeess..
OOrrddeerr PPrroodduucctt NNuummbbeerr
LLMMSS--334400 BF/DF transillumination base LLMMSS--223322 32mm post mount SS--00220044 400mm pillar LLMMSS--SSZZXX--RR Drop prevention collarLLMMSS--334411 12V/50W variable power supply
Performs likethe formerSZH-ILLD
LLMMSS--334400 bright field/dark field 12 volt/ 50 watt transillumination base
LLMMSS--334400 bright field/dark field baseshown with SZX stereo body
LLMMSS--334411 12V/50W variablepower supply
S-10
Custom Accessories by Leeds
Stereo
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
Three Place Nosepiece for SZXStereos
The Leeds three-place nosepiece is designed for useon the SSZZXX99 and SSZZXX1122 stereo microscope. Thisnosepiece design allows for the mounting of three different objectives to the SSZZXX stereo body. The LLMMSS--SSZZXX--33RREE and LLMMSS--SSZZXX--33RREE--MM are the smaller versionsof this nosepiece design and do not allow for the useof a fiber optic ringlight. The LLMMSS--SSZZXX--33RREE--LL andLLMMSS--SSZZXX--33RREE--LLMM are the larger versions of this nose-piece design and do allow for the use of a fiber opticringlight. The LLMMSS--SSZZXX--33RREE--MM and LLMMSS--SSZZXX--33RREE--LLMMmodels have detents for positioning the objective formacro use.
(The LLMMSS--SSZZXX--33RREE--LL and LLMMSS--SSZZXX--33RREE--LLMM are a larger version nosepieces that do limit the focus range of the SSZZXX--FFOO//SSZZXX--FFOOFF).
OOrrddeerr PPrroodduucctt NNuummbbeerr
LLMMSS--SSZZXX--33RREE Three place nosepiece for SZX-smallLLMMSS--SSZZXX--33RREE--MM Three place nosepiece for SZX-small with macro positionsLLMMSS--SSZZXX--33RREE--LL Three place nosepiece for SZX-largeLLMMSS--SSZZXX--33RREE--LLMM Three place nosepiece for SZX-large with macro positions
LLMMSS--SSZZXX--33RREE--LLThe LLMMSS--SSZZXX--33RREE--LL withring light
TheSZX 12 with LLMMSS--SSZZXX--33RREE--LL with ring light
S-11
Custom Accessories by Leeds
STEREO
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
SZX Stereoscope Accessories
OOrrddeerr PPrroodduucctt NNuummbbeerr
LLMMSS--SSZZXXBBIIFFOO Adapter for 8520 to SZX standLLMMSS--SSZZXXBBPP SZX Bonder Post Mount
LLMMSS--SSZZXXBBIIFFOOAdapter is for mounting a fiber optic 8520bifurcated light guide to an SSZZXX stand. It fitsbetween the pillar mount and focusing assembly.
LLMMSS--SSZZXXBBIIFFOOshown mounted on an SSZZXX stand. LLMMSS--SSZZXXBBPP
Adapter is for mounting an SSZZXXstereo body to a boom standwith a 5/8” diameter bonderstyle mount. It fits in the pillarmount of the SSZZXX focusingassembly.
LLMMSS--SSZZXXBBPPshown mounted on an LLMMSS--330000 articulated arm with an SSZZXX stereo body.
S-12
Custom Accessories by Leeds
Stereo
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
Off Axis Light Attachment
The LLMMSS--SSZZXX--OOAAXX off axis light attachment isdesigned for use with the SSZZXX stereo microscope andprovides near vertical illumination for examining PCboards, cracks, crevices and holes. It works throughoutthe full zoom range and can be used at a working distance of 70 to 200mm. The compact illuminatorattaches to the objective body with two, 3mm driveset screws.
OOrrddeerr PPrroodduucctt NNuummbbeerr
LLMMSS--SSZZXX--OOAAXX Off axis light attachment for the SSZZXX stereo microscope
AAOO88002255..4400 Fiber optic light guide
AA2200550000 ACE 150 watt fiber optic light source
LLMMSS--SSZZXX--OOAAXX on a SSZZXXstereo microscope
LLMMSS--SSZZXX--OOAAXX
S-13
Custom Accessories by Leeds
STEREO
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
Weighted Base for use with ExistingTabletop Work Surface
- Heavy steel base. Adds 4 ¾ ” Height adjustment range to the range of bonder arm selected.
- Can be used with Olympus S-0266, S-02662 or any bonder style microscope arm.
OOrrddeerr PPrroodduucctt NNuummbbeerr
LLPPII--KKSSTTAANNDD K Stand base for bonder arm
LLPPII--KKSSTTAANNDD shown with SZ stereobody
LLPPII--KKSSTTAANNDD K Stand base for bonderarm
S-14
Custom Accessories by Leeds
STEREO
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
1X Stereo Video Coupler
The LLSSZZ--11XXCCMMTT22 1x video coupler is designed for useon the Olympus SZ-6145TR stereo microscope. It isused when a 2/3” or 1” digital or analog video formatis desired. Requires the .5x lens to be removed fromthe SSZZ--66114455TTRR phototube.
An additional video coupler is available for theSSZZ--66114455TTRR.. The LLSSZZ--UU--SSPPTT photo tube coupler allowsfor all Olympus components used on the UU--SSPPTTphototube to be used on the SSZZ--66114455TTRR.
OOrrddeerr PPrroodduucctt NNuummbbeerr
LLSSZZ--11XXCCMMTT22 1X C-Mount for SZ61TR.LLSSZZ--11XXSSZZ6611 Removal of .5X lens (this must be
done at Leeds Minneapolis office).
AAddddiittiioonnaall PPrroodduucctt NNuummbbeerrss
LLSSZZ--UU--SSPPTT PE Tube for SZ-6145TR.LLSSZZ--11XXSSZZ6611 Removal of .5X lens (this must be
done at Leeds Minneapolis office).
LLSSZZ--11XXCCMMTT22 1xvideo coupler
LLSSZZ--UU--SSPPTT PE Tubefor SSZZ--66114455TTRR
LLSSZZ--11XXCCMMTT22 1x video couplershown on a SZ-6145TR stereomicroscope
S-15
Custom Accessories by Leeds
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
Boom Arm Stand with CrankAdjustment
The LLMMSS--220022--HHBBPP Crank Boom Stand pivots 360° and allows for smooth adjustment of both axes. The height of theboom adjusts with the crank at the side ofthe bottom block of the stand. The horizontal boom is on ball bearings andallows for smooth operation. Levers lockvertical, pivot and slider positions securely.
The LLMMSS--220022--HHBBPP is constructed of aluminum and stainless steel, and has anoverall height of 24” - with a verticalmotion of 19”. The horizontal boom is 24”long, and useable travel length is 18”. Thebase is constructed of 1”x10”x10” steel.
OOrrddeerr PPrroodduucctt NNuummbbeerr
LLMMSS--220022--HHBBPP Crank Boom Stand with Heavy Base
S-16
Custom Accessories by Leeds
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
Etherglow Light DiffuserThe EEGGRR--441100MM allows for diffused light fromthe LLRRLL--441100 ringlight to evenly Illuminatereflective samples. The etherglow light diffuserattachment greatly reduces glare.
OOrrddeerr PPrroodduucctt NNuummbbeerr
EEGGRR--441100MM Etherglow attachment to a LLRRLL--441100 ringlight
EEGGRR--441100MM on a SSZZ6611
EEGGRR--441100MM Pictured
S-17
Custom Accessories by Leeds
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
1X T-Mount coupler for the SZ-6145TR
The LLSSZZ22--11XXTTMMTT t-mount coupler allows for digitalSLR cameras to be used on the SZ-6145TR (requiresspecific t-mount for the camera being used). Also,removal of .5x lens from SSZZ--66114455TTRR photo port isrequired.
OOrrddeerr PPrroodduucctt NNuummbbeerrLLSSZZ22--11XXTTMMTT 1x t-mount for SSZZ--66114455TTRRLLSSZZ--11XXSSZZ6611 Removal of .5X lens in the
SSZZ66114455TTRR
LLSSZZ22--11XXTTMMTT TToopp VViieeww
LLSSZZ22--11XXTTMMTT BBoottttoomm VViieeww
S-18
Custom Accessories by Leeds
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
Face-to-Face Dual View for the SZX
OOrrddeerr PPrroodduucctt NNuummbbeerrLLPPII--SSZZXX--DDOO Face-to-Face Dual View for the SSZZXX99,
SSZZXX1100 and SSZZXX1122 (will not work with the SZX16).
SSZZXX1100 wwiitthh tthhee LLPPII--SSZZXX--DDOO
The S-X130 TrinocularObservation Tube will notwork on the LLPPII--SSZZXX--DDOO
LLPPII--SSZZXX--DDOOBottom View
LLPPII--SSZZXX--DDOOTop View
S-19
Custom Accessories by Leeds
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
LMS-SZX2BP Bonder Post
OOrrddeerr PPrroodduucctt NNuummbbeerrLLMMSS--SSZZXX22BBPP Bonder Post Mount
LLMMSS--SSZZXX22BBPPShown mounted on an LLMMSS--330000 articulated arm with an Olympus SSZZXX1166 stereo body.
LLMMSS--SSZZXX22BBPP
The LLMMSS--SSZZXX22BBPP bonder postallows for the SSZZXX22 ffooccuussiinnggbblloocckk to be mounted onto any5/8 bonder style boomstand.
S-20
Custom Accessories by Leeds
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
Polarizer for SZX2-ILLT LED Base
OOrrddeerr PPrroodduucctt NNuummbbeerrLLPPII--AANN--LLEEDD Polarizer for SSZZXX22--IILLLLTT LLEEDD BBaassee
LLPPII--AANN--LLEEDD Polarizer
TThhee LLPPII--AANN--LLEEDD Polarizer for SSZZXX22--IILLLLTT LLEEDD BBaassee mounts in the fourposition turret and allows for transmitted polarizing light applications. Used with SSZZXX22--AANN.
SSZZXX1166 with the SSZZXX22--IILLLLTTLLEEDD Base
S-21
Custom Accessories by Leeds
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
OOrrddeerr PPrroodduucctt NNuummbbeerr
LLMMSS--TTIILLTT Tilting and adjustable base
Tiltable Stereo Base with TableClamp
LLMMSS--TTIILLTT shown with a OOllyymmppuussSSZZ6611TTRR and SS--0011228822 stand
LLMMSS--TTIILLTT front view
The LLMMSS--TTIILLTT Base allows forimproved ergonomics for extendedinspection times. The LLMMSS--TTIILLTT alsoallows for multiple users to make tilt angle and height adjustments foreasier sample viewing. The tilt baseclamps to a table for increased stability and will attach to all Olympusstereomicroscope stands.
S-22
Custom Accessories by Leeds
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
OOrrddeerr PPrroodduucctt NNuummbbeerr
LMS-Z-CRK14 Z-Axis Crank Post for Olympus STU2
Boom Stand
LMS-Z-CRK14L Z-Axis Crank Post for the Leeds Boom
Stand Bases
Z-Axis Crank Post for BoomStands
The LLMMSS--ZZ--CCRRKK1144 Z-Axis crankpost can be used as a replace-ment for the vertical post onthe Olympus SSTTUU22 boomstand, or on any of the Leedsboom stand bases. It has a Z-axis range of 14" with a travelspeed of 1/8" per revolution ofthe crank knob. The post andthe lead screw drive are stain-less steel with two bronze drivenuts. The load capacity of theZ-axis crank mechanism postassembly is rated for 300 lbs.
LLMMSS--ZZ--CCRRKK1144 on the the Olympus STU2 Stand
LLMMSS--ZZ--CCRRKK1144 kit
S-23
Custom Accessories by Leeds
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
Universal Holders
OOrrddeerr PPrroodduucctt NNuummbbeerrLLPPII--UUVVCCHHLLRR Universal C-Shaped HolderLLPPII--UUVVHHLLRR Universal Holder
LPI-UVCHLR
The LLPPII--UUVVCCHHLLRR Universal C-ShapedHolder has 90° of vertical to horizontalpositioning range. The 360° rotatablechuck can hold a wire through the chuckthat has a diameter of .010” to .170”.The LLPPII--UUVVCCHHLLRR can also hold an itemas large as 1” diameter in the chuck. TheLLPPII--UUVVCCHHLLRR base has the ability torotate 360° for optimal viewing.
The LLPPII--UUVVHHLLRR Universal Holder has a 360° rotatablechuck that can hold a .010” to .170” diameter wirehorizontally through the chuck. The LLPPII--UUVVHHLLRR canalso hold an item as large as 1” diameter in the chuck.
LPI-UVHLR
LPI-UVHLR back view
S-24
Custom Accessories by Leeds
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
On Axis Lens Mount
OOrrddeerr PPrroodduucctt NNuummbbeerrLLMMSS--SSZZXX--MMAACC1100 SZX10 Objective Mount with on Axis Shift LLMMSS--SSZZXX--MMAACC1166 SZX16 Objective Mount with on Axis Shift
The LLMMSS--SSZZXX--MMAACC1100 and LLMMSS--SSZZXX--MMAACC1166lens mount allows the user to quickly switchthe SSZZXX1100 or SSZZXX1166 from a stereomicroscope,to an on axis system that provides for a macroview usage by matching the center of theobjective lens to the right side ray path ofzoom lens.
The LLMMSS--SSZZXX--MMAACC1100 and LLMMSS--SSZZXX--MMAACC1166also eliminates image shift for effective 3Drendering by imaging software.
LLMMSS--SSZZXX--MMAACC1166
LLMMSS--SSZZXX--MMAACC1166 on an OOllyymmppuuss SSZZXX1166
S-25
Custom Accessories by Leeds
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
Adjustable Mount the for theAO8520 to LMS-300
OOrrddeerr PPrroodduucctt NNuummbbeerrLLMMSS--330000BBIIFFOO Mount for AA0088552200 to LLMMSS--330000
The LLMMSS--330000BBIIFFOO adjustable mount allows the AAOO88552200 Dual Gooseneck to be attached to theLLMMSS--330000 Articulating Arm, allowing for better positioning of the light when using the LLMMSS--330000 arm.
The LLMMSS--330000BBIIFFOO can be mounted anywhere along the top, bottom or the end section of the LLMMSS--330000 articulating arm.
LLMMSS--330000BBIIFFOO on an LLMMSS330000 AArrttiiccuullaattiinngg AArrmm
LLMMSS--330000BBIIFFOO MMoouunntt
S-26
Custom Accessories by Leeds
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
Custom Breadboard Stands
The Leeds Custom Products Department can design and built a wide range of custom breadboardstands to meet any of your projects needs.
Please contact Leeds for more information on our complete line of custom breadboard products.
Leeds’ simple breadboard stands have acolumn with dovetails on all four sides,which allows for accessories like camerasand lighting to be added easily.
S-27
Custom Accessories by Leeds
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
Custom Boomstand
The Leeds Custom Products Department can design and build a wide range of custom boom standto meet any of your projects needs.
Please contact Leeds for more information on our complete line of custom boom stand products.
SSMMSS 2200 Extended Reach with Flange Base
LLPPII--LLMMPPCCAARRTT33 Anti-vibration cart30" x 36"
S-28
Custom Accessories by Leeds
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
OOrrddeerr PPrroodduucctt NNuummbbeerrLLMMSS--770000 Adjustable Height Stage Mount
The LLMMSS--770000 Adjustable Height StageMount has a 1 ½” height adjustment rangeand advances at ½” per turn of the adjusting ring. The LLMMSS--770000 also includes aBBXX//BBXX22 circular stage mount.
The LLMMSS--770000 has a wide range of basemounts available, please contact Leeds’Custom Department for more information.
Adjustable Height Stage
S-29
Custom Accessories by Leeds
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
OOrrddeerr PPrroodduucctt NNuummbbeerr
Ferrule Adaptor for 10mm LightGuide
The LLPPII--AAOO88006600 allows the use of a 10mm light guide to be used on the SZX illuminator products.
LLPPII--AAOO88006600
LLPPII--AAOO88006600 shown with the SSZZXX22--IILLLLCC1166 and 10mm light guide
LLPPII--AAOO88006600 Ferrule Adapter for 10mm light guide toOlympus SZX 12mm. Sold as a single item
S-30
Custom Accessories by Leeds
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
OOrrddeerr PPrroodduucctt NNuummbbeerr
Stage Mount for the SZX2-ILLT
LLPPII--LLEEDD--SSHH Stage Mount for BH2-SH Stage to SSZZXX22--IILLLLTT
LLPPII--SSIICCPPGG Metal Plate with glass for SSIICC44 and BBHH22--SSHH Stages
LLPPII--SSIICCPPGG Metal Plate with glass
LLPPII--LLEEDD--SSHH Stage Mount
Remove from SSZZXX22--IILLTT andreplace with LLPPII--LLEEDD--SSHH
Glass stage plate assembleremoval is done with theOlympus Spanner wrench.
The LLPPII--LLEEDD--SSHH adaptor allows the 44--LLBB440066AA stage to be mounted to the SSZZXXZZ--IILLLLTT.
The LLPPII--SSIICCPPGG metal plate with glass insert allows for X/Y platform and the transmitted light option to be used on the SSZZXX22--IILLLLTT. The LLPPII--SSIICCPPGG also can be used on the SSIICC44 stages.
S-31
Custom Accessories by Leeds
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
Retractable Arm
OOrrddeerr PPrroodduucctt NNuummbbeerrLLMMSS--335500SSZZ Retractable Arm for the SZ/SZ2 bonder mountLLMMSS--335500SSZZXX Retractable Arm for the SZX
The Leeds LLMMSS--335500SSZZ and LLMMSS--335500SSZZXXretractable arms are designed to save workspace by extending and retracting themicroscope 14” from the back edge of thework surface, as well as housing the cordsin the arm.
The LLMMSS--335500SSZZ and LLMMSS--335500SSZZXXretractable arm can be mounted to anydesktop surface using a C-clamp (2” maxdesk thickness, 2 ¾ ” minimum overhangneeded for clamp).
Made of 14 gauge metal, the LLMMSS--335500SSZZand LLMMSS--335500SSZZXX Retractable Arm can support up to 88 lbs.
The LLMMSS--335500SSZZ Retactable Arm holds anystandard 5/8” Bonder Style Mount andFocus arm, and the LLMMSS--335500SSZZXX ExtensionArm holds the OOllyymmppuuss SSZZXX--FFOO and SSZZXX--FFOOFF Focusing Unit.
OOllyymmppuuss SSZZXX1100 shown on the LLMMSS--335500SSZZXX
OOllyymmppuuss SSZZ5511 and SS--0022666622shown on the LLMMSS--335500SSZZ
S-32
Custom Accessories by Leeds
STEREO
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
LED Transmitted Light Base
The LLMMSS--222255LLEEDDSSLL self-contained tuck-under base for theOlympus SS--0011228822 stereo stand that clears up benchtop clutter and storage problems.
The base has a dual power supply for two LED light sources;internal transmitted and reflected illumination (designed forLeeds’ LLMMSS--LLEEDDSS Spot illuminator). Both sources can be usedat the same time and have their own light level control switch-es.
The LLMMSS--222255LLEEDDSSLL uses a LED light with an adjustable inten-sity control for transmitted and reflected light, that fills thefield with light at a zoom setting as low as .8x.
The internal mirror can be rotated 360 degrees and has a slid-ing feature for an oblique lighting effect. The rotatable mirrorhas a mirrored surface on one side, and a grey metallic surfaceon the other side - which allows for a better diffused lightingon samples.
The base attaches under the SS--0011228822 stand with three screwsand can be easily installed with a #1 crosspoint screwdriver
The LLMMSS--LLEEDDSS reflected LED spot lighting attaches to the SS--0011228822 stand and is powered with the LLMMSS--222255LLEEDDSSLL base.This reflected LED spot lighting can also be a stand alonereflected light source if ordered as LLMMSS--LLEEDDSSKK, LED SpotLighting Kit. This kit Includes a weighted base, flex arm andpower supply with dimmer control.
OOrrddeerr PPrroodduucctt NNuummbbeerr
LLMMSS--222255LLEEDDSSLL LED Transmitted Light Base W/Sliding Mirror for SZ2-ST Stand
LLMMSS--LLEEDDSS LED Spot Light only for LMS-225LED
LLMMSS--LLEEDDSSKK LED Spot Light Kit, Including Base, Arm & Power Control
LLMMSS--222255LLEEDDSSLL base shown mountedon SS--0011228822 and LLMMSS--LLEEDDSS
LLMMSS--LLEEDDSSKK LED Spot Light Kit
S-33
Custom Accessories by Leeds
Stereo
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
Off Axis Light Attachment - SZX16
The LLMMSS--SSZZXX1166--OOAAXX off axis light attachment isdesigned for use with the SSZZXX1166 stereo microscope,with a 1x objective, and provides near vertical illumination for examining PC boards, cracks, crevicesand holes. It works throughout the full zoom range andcan be used at a working distance of 60mm. The compact illuminator attaches to the objective bodywith two, 3mm drive set screws.
OOrrddeerr PPrroodduucctt NNuummbbeerr
LLMMSS--SSZZXX1166--OOAAXX Off axis light attachment for the SSZZXX1166 stereo microscope
AAOO88002255..4400 Fiber optic light guide
AA2200550000 ACE 150 watt fiber optic light source
LLMMSS--SSZZXX1166--OOAAXX on a SSZZXX1166 stereomicroscope
LLMMSS--SSZZXX1166--OOAAXX
S-34
Inverted
Custom Accessories by Leeds
Metallurgical Illuminator
IX2
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
The Leeds LLBBXX--IIXX22MMIILL metallurgical illuminator allows the Olympus model IIXX22 inverted microscopestand to be used for metrology.
The LLBBXX--IIXX22MMIILL illuminator has both a field and apper-ature diaphragm, a three position filter slider with day-light and green filters installed.
The Olympus IIXX22 stand equipped with the LLBBXX--IIXX22MMIILLilluminator converts the stand into an inverted metallurgical microscope utilizing the UIS optics with a22mm field of view, an erect image and photo ports.
OOrrddeerr PPrroodduucctt NNuummbbeerr
LLBBXX--IIXX22MMIILL IIXX22 Metallurgical illuminator(Requires use of Olympus 55--UULL111133 lamphouse withlonger cord.)
BBFF//DDFF uussaaggee aadddd::UU--RR225555 nosepiece (remove original nosepiece and diaphragm)UU--MM660011 Brightfield mirror cubeUU--MM660033 Darkfield mirror cube
SSiimmppllee PPoollaarriizzeedd lliigghhtt aadddd::UU--MM660055 Nomarski mirror cube
AAddjjuussttaabbllee PPoollaarriizzeedd lliigghhtt aadddd::
LLBBXX--22335522 360o rotatable analyzer slider with 32mm polarizer
DD..II..CC.. uussaaggee aadddd:: UU--MM660055 Nomarski mirror cubeUU--PP220000 Nomarski prism slider
LLBBXX--IIXX22MMIILL
LLBBXX--22335522
IIXX5511 wwiitthh LLBBXX--IIXX22MMIILL
I-1
Custom Accessories by Leeds
CKX
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
3 Layer Cross Movement Stage forCKX31/41
The LLPPII--CCKKXX33PPLLTT 2"x 2" three plate mechanical stageis designed for direct mounting of condenser lens pillar onto the stage frame on the Olympus CCKKXX4411inverted microscope.
OOrrddeerr PPrroodduucctt NNuummbbeerr
LLPPII--CCKKXX33PPLLTT 2x2 Three plate stage (Includes metal insert)
LLPPII--CCKKXX33PPLLTT 22xx22 Three plate stage
LLPPII--CCKKXX33PPLLTT 2x2 Three plate stageshown on the CCKKXX4411
I-2
Custom Accessories by Leeds IX/IX2
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
Rotatable Insert Plate IX/IX2, 3-plate design mechanical stage
OOrrddeerr PPrroodduucctt NNuummbbeerr
LLBBXX--IIXXRROOTT--11XX33 1 x 3 slide rotator for IX/IX2 3-plate design stageLLBBXX--IIXXRROOTT--11XX33//3355 1 x 3 slide & 35mm Petri dish rotator for IX/IX2 3-plate design stage LLBBXX--IIXXRROOTT--11XX33//5500 1 x 3 slide & 50mm Petri dish rotator for IX/IX2 3-plate design stage AAQQ11220033 Petri dish clip - one AARR11999988 Slide clip - one
The LLBBXX--IIXXRROOTT series insert plates are designed for rotating the specimen on the IIXX//IIXX22 seriesinverted microscope. They can be used with a 1" x 3" slide, 35mm Petri dish or a 50mm Petri dish.The knurled edges allow for easy rotating of the specimen while still on the stage. The LLBBXX--IIXXRROOTTseries inserts replace the drop-in inserts of an IIXX22--SSFFRR style three-plate design mechanical stage.Included in the Leeds design are mounting holes for using Petri dish holding clips or slide holdingclips, and an oiling access hole for an oil immersion objective.
LLBBXX--IIXXRROOTT--IIXX33//3355 ppiiccttuurreedd
I-3
Custom Accessories by Leeds
CKX
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
Condenser Pillar Pivot Modificationfor the CKX31/41
The LLPPII--CCKKXX--TT9900 modification to the CCKKXX3311//4411 condenser pillar allows for a 90 degrees rotation to theleft. This makes it easier to place larger items, such asroller bottles or flasks on the stage.
The LLPPII--CCKKXX--TT9900 modification requires that the pillar from theCCKKXX3311//4411 be sent to Leeds for modification. For equipment thatis currently in use in the field, Leeds has a limited number of exchange units available.
OOrrddeerr PPrroodduucctt NNuummbbeerr
LLPPII--CCKKXX--TT9900 CCKKXX condenser pillar 90o pivot modification
CCKKXX3311 with the LLPPII--CCKKXX--TT9900modification.
LLPPII--CCKKXX--TT9900 modification
I-4
Custom Accessories by Leeds
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
Filter Holders for IX2 Frame forIX2-AN Slot
LLPPII--IIXX22AANNOO--3322 -- 32mm Filter Slider
LLPPII--IIXX22--AANNOO -- 25mm Filter Slider
OOrrddeerr PPrroodduucctt NNuummbbeerrLLPPII--IIXX22AANNOO--3322 Blank 32 mm Filter Slider for IX2-AN slotLLPPII--IIXX22AANNOO Blank 25mm Filter Slider for IX2-AN slot
I-5
Custom Accessories by Leeds
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
OOrrddeerr PPrroodduucctt NNuummbbeerr
LLBBXX--IIXXSSLL X and Y Stage Lock for IX Stages
X and Y Stage Lock for the IX
LLBBXX--IIXXSSLL SSttaaggee LLoocckk SShhoowwnn on a OOllyymmppuuss IIXX8811FFVV11000000
The LLBBXX--IIXXSSLLsimultaneously locks boththe X and Y position on theIX three plate series ofstages.
I-6
MX
Custom Accessories by Leeds
MX
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
Tilting Plate for Manipulating Samples
The LLMMSS--MMEEMMSS sample holder is designed to rotate360o and also features a spring loaded non-metallicjaw to hold a sample. The LLMMSS--MMEEMMSS allows for acleaved wafer to be easily leveled for trench measurement by moving a knurled knob while viewingthe sample.
The LLMMSS--MMEEMMSS can also be used for other samplesthat are hard to place on a traditional stage for viewingat different angles.
**LLeeeeddss ooffffeerrss aa wwiiddee rraannggee ooff ssppeecciimmeenn hhoollddeerrss ffoorrmmaannyy ddiiffffeerreenntt aapppplliiccaattiioonnss..
OOrrddeerr PPrroodduucctt NNuummbbeerr
LLMMSS--MMEEMMSS Specimen tilting plate for the MMXX--SSIICC88
LLMMSS--MMEEMMSS holding a cleaved wafersample
LLMMSS--MMEEMMSS on a MX80
MX-1
CX
Custom Accessories by Leeds
CX31/41
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
Tetrad Kit and Modification forCX31/41 Microscope
OOllyymmppuuss TTeettrraadd MMiiccrroossccooppee For use in micromanipulation of spores for geneticanalysis. This ergonomically designed joystick stylemicromanipulator enables the rapid relocation ofspores on agar surfaces.
LLPPII--CCXXTTEETT Tetrad kit and modification to CX31 or CX41 microscope (Specify Right Hand or Left Hand mount)
LLBBXX--TTRRDDPPLLTT Tetrad 100mm Petri dish holder - Left Hand).
LLBBXX--TTRRDDPPLLTT--RR Tetrad 100mm Petri dish holder - RightHand).
LLPPII--CCXXTTEETT Tetrad kit shownon an Olympus CX41 microscope.
Kit includes a 100mm Petri dish holder and micromanipulator assembly.
110000mmmm PPeettrrii ddiisshh hhoollddeerrMMiiccrrooccllaammpp
MMoovveess nneeeeddlleeaalloonngg xx aaxxiiss
JJooyyssttiicckk mmoovveessnneeeeddllee aalloonngg yyaanndd zz aaxxiiss
MMoovveess nneeeeddllee aalloonngg zzaaxxiiss
CX-1
CX31/41
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
Support Brace for mounting a U-DO3 onto the CX41 Frame
OOrrddeerr PPrroodduucctt NNuummbbeerr
LLPPII--CCXXUUDDOO Support brace for UU--DDOO33 to CCXX3311//4411 frame.
The LLPPII--CCXXUUDDOO pictured on a CCXX3311frame
The LLPPII--CCXXUUDDOO pictured from the backLLPPII--CCXXUUDDOO
CX-2
Custom Accessories by Leeds
Custom Accessories by Leeds
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
CX/BX Swivel Head Mount
The LLPPII--CCXXSS swivel mount allows foreasy rotation of the binocular of a BXor CX. This accommodates cabinetstorage, allows for multiple viewerswithout damage to the dovetailmount and keeps the binocular frominadvertently falling off.
The LLPPII--CCXXSS has 360º of rotation andgreatly extends the life of the microscope.
OOrrddeerr PPrroodduucctt NNuummbbeerr
LLPPII--CCXXSS BX/CX Swivel Mount
LLPPII--CCXXSS oonn aa CCXX3311
LLPPII--CCXXSS
CX-3
Rollscope
Custom Accessories by Leeds
Rollscope
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
Rollscope Base Microscope The Leeds Rollscope can be used for jobs that a traditional microscope can't do. The portable design with roll feet is ideal forfield operation, inspection of printing rolls or viewinginaccessible and large objects that cannot be placed on the stageof a microscope. The Leeds Rollscope microscope can be configured with a focusing optical tube or focusing arm. Thefocusing optical tube will hold an eyepiece and an objective of aspecified magnification, while the focusing arm - with the use ofvarious adapters - will hold a machine vision type lens system.
The RROOLLLLSSCCOOPPEE11OOTT Rollscope microscope is configured with amonocular optical tube and has 1 ¼" of focus range and a leadscrew driven y-axis positioner with 1" travel. Included in theRROOLLLLSSCCOOPPEE11OOTT design is a focusing beam flashlight with mounting bracket.
The RROOLLLLSSCCOOPPEE22OOTT Rollscope microscope is configured with amonocular optical tube which has 1 ¼" of focus range andleadscrew driven positioners with 1" travel in both x-y axis.Included in the RROOLLLLSSCCOOPPEE22OOTT design is a focusing beam flashlight with mounting bracket.
The RROOLLLLSSCCOOPPEE11SSDD Rollscope microscope is configured with afocusing arm mounted on a post, which has 1 1/8" of focus rangeand can mounted higher on the post for taller objects. The leadscrew driven y-axis positioner has 1" travel. Included in theRROOLLLLSSCCOOPPEE11SSDD design is a focusing beam flashlight with mounting bracket.
The RROOLLLLSSCCOOPPEE22SSDD Rollscopemicroscope is configured with afocusing arm mounted on a post,which has 1 1/8" of focus range andcan be mounted higher on the postfor taller objects. The lead screwdriven positioners have 1" travel inboth x-y axis. Included in theRROOLLLLSSCCOOPPEE22SSDD design is a focusing beam flashlight withmounting bracket.
OOrrddeerr PPrroodduucctt NNuummbbeerr
RROOLLLLSSCCOOPPEE11OOTT 1-axis rollscope base with focusing optical tube
RROOLLLLSSCCOOPPEE22OOTT 2-axis rollscope base with focusing optical tube
RROOLLLLSSCCOOPPEE11SSDD 1-axis rollscope base with focusing arm and post mount
RROOLLLLSSCCOOPPEE22SSDD 2-axis rollscope base with focusing arm and post mount
RROOLLLLSSCCOOPPEE11OOTT Pictured
RROOLLLLSSCCOOPPEE22SSDD Pictured with camera
R-1
MVX 10
Custom Accessories by Leeds
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
MVX 1X C Mount Adapter withFilter Slider
The LLPPII--MMVVXX--VV331111SSLL 1X-C-mount adapterwith slider allows for a filter to be insertedinto the camera’s raypath. Adding a filter in this position when in the camera’s raypath will effect parfocality.
OOrrddeerr PPrroodduucctt NNuummbbeerr
LLPPII--MMVVXX--VV331111SSLL MVX 1X C mount adapter with filter slider
The LLPPII--MMVVXX--VV331111SSLL C-mount adapter requires the use of theOlympus UU--VV111111 (UU--TTVV11XX--22)) adapter.
MMVVXX1100 with LLPPII--MMVVXX--VV331111SSLL
LLPPII--MMVVXX--VV331111SSLL Pictured
MVX-1
MVX 10 Hybrid StandThe Leeds LLBBXX--HHYYBBRRIIDD hybrid stand has 18"of travel in theZ-axis, which is all done on ball bearing sleeves with -counter balanced springs. This design allows for ease in mov-ing the microscope components out of the way for loadingor unloading specimens, or just positioning for different height objects - such as whole animals or metallurgical samples. The LLBBXX--HHYYBBRRIIDD also has anadjustable stop for returning the microscope back to a predetermined position after loading a specimen.
The LLBBXX--HHYYBBRRIIDD stand is designed to be used with Olympusitems: BBXXFFMM--FF focus module, BBXXFFMM--IILLHH mount and any ofthe BX2 reflected light brightfield/darkfield and fluorescenceilluminators.
The LLBBXX--HHYYBBRRIIDD--RRSSMM mount is designed for using a reflect-ed light stage on the LLBBXX--HHYYBBRRIIDD stand.
The LLBBXX--HHYYBBRRIIDD--TTSSMM module is to be used with the BBXX22condensers and transmitted light stages on the LLBBXX--HHYYBBRRIIDD stand. This module is a Koehler transmittedlight illumination system that requires the use of a BBXX22lamphouse and an external power supply. It can also be usedwith a fiber optic light system.
The LBBXX--HHYYBBRRIIDD--SSZZXX mount allows for the use of the SSZZXXstereoscope and SSZZXX--FFOO//FFOOFF focus unit to be used with theLLBBXX--HHYYBBRRIIDD stand.
The combination of the hybrid stand and the many Olympusmodular components make for a versatile microscope for viewing a variety of size of specimens.
OOrrddeerr PPrroodduucctt NNuummbbeerr
LLBBXX--HHYYBBRRIIDD Hybrid stand with 18" Z-axis range
LLBBXX--HHYYBBRRIIDD--RRSSMM Reflected light stage mount
LLBBXX--HHYYBBRRIIDD--TTSSMM Transmitted light stage module
LLBBXX--HHYYBBRRIIDD--SSZZXX Mount for SZX and SZX-FO/FOF focus unit
Custom Accessories by Leeds
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
MMVVXX 1100 oonn aa LLeeeeddss HHyybbrriidd ssttaanndd
MVX-2
Custom Accessories by Leeds
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
OOrrddeerr PPrroodduucctt NNuummbbeerr
LLPPII--DDPPPP Dual Photo Port Module
Dual Photo Port
The LPI-DPP allows for a quick change between two cameras withdifferent mounts on the Olympus MVX10. Please contact theLeeds Custom Department for more information on other customphoto ports.
MVX-3
Custom Accessories by Leeds
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
OOrrddeerr PPrroodduucctt NNuummbbeerr
LLMMSS--MMVVXX--33RREE Three place nosepiece for MVX10
3 Place Nosepiece for the MVX
The Leeds LLMMSS--MMVVXX--33RREE three-placenosepiece is designed for use on theMMVVXX1100 macroscope. This nosepiecedesign allows for the mounting ofthree different objectives to theMMVVXX1100. The LLMMSS--MMVVXX--33RREE can notbe used with a ringlight.
LLMMSS--MMVVXX--33RREE on the Leeds Z Plus Stand
LLMMSS--MMVVXX--33RREE Three-place nosepiece
MVX-4
FluoView
Custom Accessories by Leeds
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
Filter Holder for the FluoView 300
The LLFFVV--EEMMBBFFSS empty filter slider will accept an18mm emission filter for the FFlluuooVViieeww 330000.
OOrrddeerr PPrroodduucctt NNuummbbeerrLLFFVV--EEMMBBFFSS 18mm Filter holder for the
FluoView 300 (18 mm Blank slider for FluoView 300)
LLFFVV--EEMMBBFFSS
FV-1
Z Plus
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
Custom Accessories by Leeds
Z Plus Stand - RFA
OOrrddeerr PPrroodduucctt NNuummbbeerrLLPPII--ZZ++RRFFAA1166 Fluorescence Illuminator LLPPII--ZZ++RRFFAARRMM RFA16 Optical Arm
LPI-Z+RFA16
LPI-Z+RFARM
Leeds Z Plus Stand shown with LLPPII--ZZ++RRFFAA1166Fluorescence Illuminator and LLPPII--ZZ++KKOOEE Köhlerillumination module.
The LLPPII--ZZ++RRFFAA1166 is a modification of theOlympus SSZZXX1166 fluorescence illuminatorwith the focus components removed. TheLLPPII--ZZ++RRFFAA1166 is designed for the Z Plusstand and provides for greater stability andsteadiness of the optical image. The LLPPII--ZZ++RRFFAA1166 provides an even and seamless fluorescence illumination and has afive position turret for various filter units.The LLPPII--ZZ++RRFFAA1166 requires the LLPPII--ZZ++RRFFAARRMM..
Z-1
Custom Accessories by Leeds
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
Z Plus Stand - BX2 Components
OOrrddeerr PPrroodduucctt NNuummbbeerrLLPPII--ZZ++BBXXAARRMM BX2 Optical ArmLLPPII--ZZ++KKOOEE Köhler Illimination Module
The Leeds Z Plus Stand is shown withBX2 Optical Arm and Köhler illumina-tion module.
The LLPPII--ZZ++KKOOEE Köhler Illuminator Module for the Z Plus Stand is designed for a fixed stage height.The LLPPII--ZZ++KKOOEE has a field diaphragm and filter cassette that can hold up to four filters. The LLPPII--ZZ++KKOOEE will accept any Olympus BX/BX2 choice of stage, condenser and lamp housing. The LLPPII--ZZ++KKOOEE can also accept the LLPPII--ZZ++FFOOKK fiber optic illumination kit.
The LLPPII--ZZ++BBXXAARRMM Optical Arm, when added to the Z Plus Stand, allows for use of the OlympusBX2 reflected light microscope components.
LLPPII--ZZ++BBXXAARRMM
LLPPII--ZZ++KKOOEE
Z-2
CopyStands
Custom Accessories by Leeds
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
Simple Copy Stands
The Leeds Custom Products Department can design and build a wide range of custom simple copystands to meet any of your projects needs.
Please contact Leeds for more information on our complete line of simple copy stands.
Leeds’ simple copy stands column have a dovetail on allfour sides, which allows for accessories like cameras andlighting to be added easily.
All adjustments to the stand aredone with a 3mm wrench.
CS-1
MeasuringSystems
Custom Accessories by Leeds
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
Three Axis Measuring System forthe Olympus BX41RF/BX51RF
OOrrddeerr PPrroodduucctt NNuummbbeerrLLPPII--SSIICC44LLEE--..55UUMM 2-Axis Linear Encoders with .5um resolution. Includes all parts and labor to
install on customer’s Olympus UU--SSIICC44RR22 Mechanical stage.
LLPPII--BBXX5511ZZHHEE Z-Axis Linear Encoder with .5um resolution Includes all parts and labor to installon customer’s Olympus BX41RF/ BX51RF reflected light frame.
LLPPII--DDRROO33QQCC 3-Axis QC-130 Digital Readout with RS232 output.
The Leeds Customs Department requires the BX41RF/BX51RF and the U-SIC4R2 stage to performthe modifications.
The LLPPII--SSIICC44LLEE--..55UUMM, LLPPII--BBXX5511ZZHHEE and LLPPII--DDRROO33QQCC modifications are a three axis,.5 um resolution, measuring system for theOlympus BBXX4411RRFF//BBXX5511RRFF frame with theOlympus UU--SSIICC44RR22 mechanical stage. (TheOlympus UU--SSIICC44RR22 mechanical stage has 4”x 4” of travel). Also available for the systemis the LLPPII--DDRROO33QQCC three axis digital readoutwith RS232 output.
MS-1
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
Custom Accessories by Leeds
OOrrddeerr PPrroodduucctt NNuummbbeerrLLPPII--SSFFHHFF2255 Video Inspection SystemLLMMSS--330000 Articulating ArmLLMMSS--119977 Table Clamp PostLLMMAA--003366AA Drop Prevention Collar
Video Inspection SystemThe Leeds LLPPII--SSFFHHFF2255 Video InspectionSystem is a fully integrated video microscope that incorporating a lens, camera and display into one compact pieceof equipment.
The Leeds LLPPII--SSFFHHFF2255 is designed toinspect parts with an adjustable field ofview and magnification range. When combined with Leeds’ LLMMSS--330000 articulatingarm and the LLMMSS--119977 table clamp post, theLLPPII--SSFFHH2255 becomes an ergonomic andwork space friendly inspection system.
The LLPPII--SSFFHHFF2255 Video Inspection Systemincludes:
Color analog video camera, 1/3" CCD15" Color HD LCD monitor4x to 15.2x magnification range.54 x .41” to 2.06 x 1.54” field of view1.8” to 10” working distance
WWoorrkkiinnggDDiissttaannccee
MMaaggnniiffiiccaattiioonn aattMMoonniittoorr
FFiieelldd ooff VViieeww
1.8" (min) 15.2x (max) .54" x .41"
3" 14.3x .74" x .56"
4" 8.90x .92" x .70"
5" 7.35x 1.12" x .84"
6" 6.37x 1.30" x .94"
7" 5.57x 1.48" x 1.12"
8" 5.00x 1.64" x 1.24"
9" 4.53x 1.82" x 1.38"
10" 4.00x 2.06" x 1.54"
LLPPII--SSFFHHFF2255 Video Inspection System
MS-2
Custom Accessories by Leeds
Stereo
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
All in One Video Inspection System
Leeds’ All in One Video Inspection Systems is a LCD resistive touch screen,PC based vision system, that allowsusers to do their inspection on an integrated monitor.
The Leeds All in One Video InspectionSystem has an intergraded five megapixel color video camera, 25mmlens, LCD resistive touch screen computer, articulated arm for the lensand camera, and a movable arm whichallows the end users to easily adjust theheight and tilt of display to provide better ergonomic viewing.
The systems features include:• 1X, 2X and 3X digital zoom
settings - additional custom magnification settings available.
• Auto gain and white balance withmagnification change.
• Ability to load your own digital reticle overlays with a bitmap file via a thumb drive.
• Reticle overlay can be changed toany color.
• Image capture and storage locallyor via a thumb drive.
• View samples with ambient light or with optional LED lighting.
• Customizable security levels.
OOrrddeerr PPrroodduucctt NNuummbbeerr
LLPPII--SSFFHHFF2255AAIIOO All in One Video Inspection SystemLLMMSS--119977--2244 24" Post W/ C-Clamp Mount LLMMSS--330000 Articulated Boom ArmLLMMAA--003366AA Safety Collar for Boom StandLLPPII--BBFFMM Bonder Focus MountLLMMSS--LLEEDDLLKK LED Spot Light Kit
LLPPII--SSFFHHFF2255AAIIOO ""AAllll iinn OOnnee"" VViiddeeoo IInnssppeeccttiioonn SSyysstteemm
MMSS--33
Custom Accessories by Leeds
LLeeeeddss CCuussttoomm PPrroodduuccttss Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369custom@leedsmicro.comwwwwww..lleeeeddssmmiiccrroo..ccoomm
OOrrddeerr PPrroodduucctt NNuummbbeerrLLMMSS--771100 Angle Pillar Stand with Height Adjustable Stage
90º 90º
The LLMMSS--771100 Angle Pillar Stand has an 32mm diameter post that can be adjusted to an angle of180º of inclination - in 10º increments. The pivot point of the LLMMSS--771100 is 4 ½” and all angle adjustments are done with a quick release push button.
The LLMMSS--771100 includes a 3/8” x 16” x 16” black anodized base and a 10” high post above the pivotpoint - additional heights available.
The LLMMSS--771100 also includes the LLMMSS--770000 Adjustable Height Stage mount that has a 1 ½” heightadjustment range, which advances at ½” per turn of the adjusting ring. The LLMMSS--770000 also includesa BBXX//BBXX22 circular stage mount.
Angle Pillar Stand
LLMMSS--771100 Angle Pillar Stand, LLMMSS --770000 Adjustable HeightStage and video camera
MS-4