E-mail: [email protected] MS Phone no.044 … final-kkn-171017.pdf · The cover should be...
Transcript of E-mail: [email protected] MS Phone no.044 … final-kkn-171017.pdf · The cover should be...
EMPLOYEES STATE INSURANCE CORPORATION ESIC MEDICAL COLLEGE AND PGIMSR MODEL HOSPITAL (ISO 9001-2008 CERTIFIED) , ASHOK PILLAR ROAD, K.K NAGAR,CHENNAI-600078.
E-mail: [email protected] MS Phone no.044-24893714
Website: www.esichennai.org FAX No.044-24897094
Tender No. 51/U/P&B/Ortho-Impl 17-18 –F7 Dated: 16.10.2017
“CONFIDENTIALITY IS THE ESSENCE OF THIS TENDER”
Sub: e-Tender Notice for Purchase of Ortho Implants under rate contract to the
ESIC Hospital,Chennai under double bid system for the year- 2017-2019
E-tender is invited by the Dean, ESIC Medical College and PGIMSR Model Hospital, K.K nagar,
Chennai-600 078 (under double bid system) from the manufacturers/authorized distributors/ Importers /Authorized
suppliers having their business/ office at Chennai for the purchase of Orthopedic Implants under Rate Contract for two
years .It can be extended further at the discretion of Dean, ESIC Medical College and PGIMSR Model Hospital, K.K
nagar, Chennai-78 after taking consideration various factors governing such extension .
If you are in a position to quote for the contract in accordance with the requirements stated in the attached
schedule you should submit the tender through online only at e-procurement portal Tender
https://esictenders.eproc.in .Document along with detailed tender notice, all terms and conditions and procedure of e-
tendering may be viewed online or downloaded by the tenderer from the ESIC websites www.esic.nic.in &
www.esichennai.org at “tenders” & https://esictenders.eproc.in . The downloaded complete tender documents duly
filled in and signed on every page should be scanned and uploaded as per instructions in Annexure-I on or before
13.11.2017 upto11.00 A.M.
In addition to e-tender which has to be filed on-line, the bidders also shall be required to submit the Earnest
Money Deposit (EMD) in the form of Demand Draft drawn at any Nationalized / Scheduled bank in favor of ESI Fund
Account No.1 payable at Chennai to be submitted either through Registered post with acknowledgement due (RPAD) or
by hand delivery to the Dean,ESIC Medical College and PGIMSR Model Hospital, Purchase branch, Room No:125, Ist
Floor, K.K nagar, Chennai-78, before the due date of opening of the tender without fail. All the original affidavits and
documents are to be submitted with the technical bid as scanned copies uploaded in the e-tender format. Evaluation of
online tender will only be done in normal circumstances.
PRE-BID MEETING: There will be a Pre-bid meeting conducted on 27.10 .2017 regarding the tender at DMS
chamber intrested bidders may participate in the meeting.
All bidders are requested to check further notifications / Updates if any, on all the above mentioned websites only
and No further newspaper advertisement will be given .
TENDER SCHEDULE
SL.No Details Dates / Time
1 Period of availability of online e-tender document on
websites .
From: 17.10.2017 upto Dated:13.11.2017
till 11.00AM
2 Handing over of EMD amount /S.D amount in the
mode of Demand Draft through post (RPAD) or by
hand delivery before the time period of Opening the
bid without fail.
The Dean, ESIC Medical College and
Hospital, Ist Floor, Room No:125, Purchase
Branch,K.K nagar, Chennai -78
3 Pre-Bid Meeting on 27.10.2017 / 11.00 AM
4 Last date and time of Bid Submission 13.11.2017 / 11.00 AM
5 Date of Opening online tenders 13.11.2017 / 11.30.A.M
6 Bid Processing Fee Rs.2,495/-
7 Earnest Money Deposit/ Bid Security Rs.25000/-
8 Performance Security/ Security Money to be deposit
for successful Bidder
10% value of the contract.
9 Date of opening of Price Bid Will be intimated after evaluation of technical
bid.
*In case of an unscheduled holiday on the prescribed tender opening date, the tenders shall be opened on the next working
day at the same venue and time. NOTE:- LATE TENDER OR POSTAL DELAYARE NOT ACCEPTABLE
DEAN
ESIC MEDICAL COLLEGE AND HOSPITAL, CHENNAI
PG:1
B. PAYMENT RELATED INSTRUCTIONS FOR BIDDERS
Important Instructions for Bidders
All bidders/contractors are required to procure Class-IIIB Digital Signature Certificate
(DSC) with Both DSC Components i.e. Signing & Encryption to participate in the ETenders.
Bidder should get Registered at https://esictenders.eproc.in.
Bidders can contact our Helpdesk at https://esictenders.eproc.in/html/Support.asp
Bidder needs to submit Bid Processing Fee charges of Rs. 2495/- (non-refundable) in the
form of Demand Draft from any scheduled bank in favour of M/s. C1 India Pvt. Ltd.,
payable at New Delhi (or in any other form as acceptable by C1 India Pvt. Ltd.) for
participating in the Tender. [email protected]
Along with the Demand Draft, Bidder needs to send a covering Letter mentioning about
the Payment Details, Company Name, Address, User ID and Payment towards ESIC Bid
Processing Fees (Mention the Tender ID and Tender Title).
The payment should reach at the below mentioned address, at least one day before the
due date and time of Bid Submission:
Kind Attn: Mr. Mohit Chauhan
C1 India Pvt. Ltd.
301, Gulf Petro Chem Building, 1st Floor,
Udyog Vihar, Phase – 2,
Gurgaon, Haryana – 122015
Note: Bid Processing Fee will be Approved only after the receipt of payment.
C.INSTRUCTIONS TO BIDDERS FOR SUBMISSION OF BIDS : Annexure-I
1.The tender document can be downloaded from www.esic.nic.in, www.esichennai.org and Central Public
Procurement Portal: www.esictenders.eproc.in. The original copy of tender duly completed and signed on each
page, should be scanned and uploaded in the e-tender format. The payment mode for the EMD should be
submitted in a separate sealed cover super scribed as “tender for the Purchase of Ortho Implants” under
rate contract to the ESIC,Hospital K.K nagar,Chennai-78 under double bid system for the year-
2017-2019.
2. The EMD fee in the form of Demand draft or Banker’s cheque in favor of “ESIC Fund A/c No. I”
payable at Chennai, should be kept inside the EMD envelope The Demand Draft should reach the concerned
authority before the due date and time of opening the tender and the bid security is normally to remain
valid for a period of forty five days beyond the final bid validity period. If the vendor fails to submit EMD
on his part then his participation towards the tender is liable to rejected . Even though he has registered online.
The cover should be sealed and sent through REGISTERED POST addressed to the Dean, ESIC Medical
College and Model Hospital,Chennai-600078.The cover should be super scribed ‘Tender for Ortho
Implants-2017 EMD’.
3. Bidders who claim exemption from EMD must produce a valid exemption certificate issued by the concerned
authorities like Micro and Small Enterprises (MSEs) of Micro, Small-Scale and Medium enterprises which are
registered with Central Purchase Organization or the concerned Ministry of Department.
4.The EMD amount of unsuccessful tenderers shall be refunded within one month after the award of work to the
successful tenderer without interest. Hence the tenderers should submit an ADVANCE RECEIPT affixing
with the Revenue stamp along with the full particulars of the Bank details in order to credit the amount
through ECS. This receipt should be kept in the envelope for EMD and sent through post / hand over to
person as per instructions.
5. The right to ignore / reject any tender, which fails to comply with the above instructions, is reserved.
Tender will be opened on the due date 13.11.2017 , 11.30 AM ESIC Hospital, K.K nagar, Chennai in the
presence of bidders or their authorized representative. If due date of opening is declared holiday, tender will be
opened on the next working day at the same time and the Dean, reserves the right to reject any tender or all
without assigning any reason(s) thereof.
PG:2
DEAN
ESIC MEDICAL COLLEGE AND HOSPITAL, CHENNAI
CONDITIONS OF CONTRACT
GENERAL TERMS AND CONDITION: Annexure-II
Date of Publishing of Tender: 17.10 .2017 and
Last Date of applying online Tender: 13.11.2017 upto 11:00 AM
Date & Time of Opening of Tender : 13.11.2017 at 11:30 AM
Earnest Money Rs. 25000/-
Security Money -10% of value of the Contract.
1. Tenders will be opened at ESIC Medical College and Model Hospital, K.K.Nagar, Chennai-78, on the
stipulated date and time in the presence of the tenderers / representatives who choose to be present.
• Pre-Qualification Criteria :
a) The tendrer should have authorized business centre / service provider in and around Chennai and the
complete postal address, Telephone, Mobile, Fax, E-mail etc should be provided while submitting the complete
tender form.
• b) Bidder should be the manufacturer / authorized dealer / Distributor / Trader / Supplier. Letter
of Authorization from Manufacturer for the same and specific to the tender should be uploaded
in the prescribed place.
c)An undertaking from the original Manufacturer is required stating that they would facilitate the bidder on
regular basis with technology / product updates and extend support whenever necessary. The scanned copy of the
same to be uploaded.
• The two part bids i.e. a).Technical Bid and b).Price bid shall comprise of the following:
(A) Technical Bid
The following documents are the vital documents which should be uploaded by
the Bidder along with Technical Bid as per the tender document for getting qualified.
a) Scanned Copy of EMD Cost.
b) Mention the status of the bidder - Manufacture / Distributor / Dealer / Trader / Supplier supporting
documents.
c) In case of distributor / dealer / trader / supplier must be upload tender specific authorization
certificate from OEM/ manufacturer .
d) Copy of PAN Card.
e) Firm / Company registration certificate.
f) GST registration certificate .
g) Income Tax Return of last three years.
h) Tenderer must provide evidence of experience / supplied materials as mentioned in tender document
i) Annual turnover & balance sheet of last three year duly certified by CA as mentioned in tender
document.
j) Declaration by the Bidder should be uploaded as mentioned in tender document.
k) Relevant brochure / catalogue pertaining to the items quoted with full specifications etc.
l) Tenderer must provide a certificate on letter head that proprietor / firm has never been black listed
by any organization should be uploaded.
m) Technical Specifications Compliance Report.
PG:3
n) Previous history of records for the supply of items in any Government/ Reputed private
Organization.
o) Certification in your letter head that price quoted is not higher than previously supplied to any
Government Institute/ Organization / Reputed Private Organization or DGS&D in any recent
records.
p) Without fulfillment of the said above records from (a to o) your bid gets rejected without any reason.
(B) Price Bid
a) The information given in the Techno-commercial bid should reproduced once again in
the price bid with indication of PRICES. Any deviation will liable to rejection.
a) Rates should be typed in words as well as in figures, free from erasing, cutting and overwriting.
b) Price quoted should match with the items quoted in technical bid.
c) Successful bidder shall not be entitled to any rate revision of price for any reason except that
allowed by Government of India.
d) In case any variation in the price quoted is found the bid automatically be cancel.
e) The quoted price should be all inclusive lump sum price offered for each item , freight, Insurance,
transit insurance, packing forwarding etc., . Rates and GST must be quoted separately.
f) The rates quoted should be F.O.R ESIC PGIMSR & Model Hospital, K.K. Nagar, Chennai - 78. No
other charges in addition will be payable on any account over and above the lump sum price quoted
in the price bid. The rates quoted in ambiguous terms such as "Freight on actual basis" or " Taxes as
applicable extra" or "Packing forwarding extra" will render the bid liable for rejection.
g) Opening of the Technical bid will be the first stage on the mentioned date in the presence of the
bidders who choose to be present. The price bid of the firm whose items are technically fulfilling the
specifications and other conditions, will be considered for evaluation.
h) For imported goods, the price quoted shall not be higher than the lowest price charges by the
tenderer for the goods of the same nature, class or description to a purchaser, domestic or foreign or
to any organization or department of Govt. of India.
i) If it is found at any stage that the goods as stated have been supplied at a lower price, than that price,
with due allowance for elapsed time will be applicable to the present case and the difference in cost
would be refunded by the supplier to the purchaser, if the contract has already been concluded.
• Tender currencies :
The tenderer supplying indigenous goods shall quote only in Indian Rupees.
• Validity of Tender :
• Tender will be valid for a period of TWO YEARS from the date of signing of agreement.
• Right of Acceptance : ESIC Hospital, K.K.Nagar reserves the right to accept or reject any or all
tenders / quotations without assigning any reason there of and also does not bind itself to accept
the lowest quotation or any tender. ESIC Hospital, K.K.Nagar also reserves the rights to accept
all the implants items in the given tender or only part of it in any given schedule without
assigning any reason.
• Subletting of contract : The firm shall not assign or sublet the contract or any part of it to any
other person or party without having first obtained permission in writing of ESIC Hospital,
K.K.Nagar, which will be at liberty to refuse if thinks fit. The tender is not transferable.
PG:4
• Either the authorized Indian agent on behalf of the principal/OEM or principal/OEM himself can
bid but both cannot bid simultaneously for the same item/product in the same tender.
• If an agent submits bid on behalf of the principal/OEM, the same agent shall not submit a bid on
behalf of another principal/OEM in the same tender for same item/product.
• Bidders in their own interest shall ascertain the eligibility of whatsoever concessions and
exemptions are eligible and applicable to the ESIC PGIMSR & Model Hospital, K.K. Nagar,
Chennai and shall advise the purchaser and quote accordingly.
• The firm should be registered and should have the average annual turnover of at least
Rs.______(Two times of the value of contract) of the bidder in the last three financial years.
Copies of authenticated balance sheet for the past three years should be uploaded.
• As per GFR 2017 due consideration will be given to start ups.
• Demonstration of equipment :
◦ Tenderer should be able to demonstrate the product quoted by them, to the Technical
Evaluation Committee in Chennai within one week from the date of opening of tender or as
per the communication given by this office.
◦ The company will get only one chance for demonstration. In case, the company fails to
arrange the demonstration, the bid shall be liable to cancellation.
◦ The date for demonstration shall be fixed with mutual consent on telephone/e-mail and the
same shall be confirmed in writing or by fax. In any case, not more than two weeks time
shall be given to arrange for demonstration.
◦ OPENING OF PRICE BID: Price bid will be done by fixing a date publishing in the
websites and necessary communication given to the bidders /authorized dealers/
representatives only those technically qualified bidders will be considered for
PRICE BID opening.
• Security Deposit :
◦ The successful bidder shall have to submit a performance guarantee (PG) within 30 days from
the date of issue of Letter of Award (LOA). Extension of time for submission of PG beyond 30
days band up to 60 days from the date of issue of LOA may be given by the competent authority
to sign the contract agreement however a panel interest of 15% per annum shall be charged for
the delay beyond 30 days. i.e., 31st day after the date of issue of LOA. In case of the contract
fails to submit the requisite PG even after 60 days from the date of issue of LOA the contract
shall be terminated duly forfeiting the EMD and other dues if any payable against the contract.
The failed contractor shall be debarred from participating in re-tender (if any) for that item.
Performance Guarantee Bond is mandatory.
◦ Validity of the performance guarantee bond shall be for a period of 60 days beyond of entire
contract period from the date of award of contract.
◦ After Completing of contract period successfully on receipt of Performance security Deposit will
be released.
PG:5
Signing of Mou: The Successful bidder has to sign Mou for fulfilling the terms
and conditions of the tender for till the validity of contract. Specimen
copy of the Memorandum of Understanding is given below:
AGREEMENT for the supply of ORTHO IMPLANTS UNDER RATE CONTRACT FOR TWO YEARS
Agreement made this __________day of ______ 2017 at ESIC Medical College and Model Hospital,
K.Knagar, Chennai-78 between M/s._________ having its registered office at_______ (hereafter referred to as
“Supply for ORTHO IMPLANTS” which term should include its successors, representatives, hires, executors and
administrators unless excluded by contract) on one part and ESIC Medical College and Model Hospital, K.K nagar,
Chennai-600 078, Tamilnadu on the other part.
Whereas ESIC-Medical college and Model Hospital desires to purchase ORTHO IMPLANTS for its
hospital at K.K nagar, Chennai-600 078 and Whereas the Contractor has agreed to provide the same in the manner
and under the terms and conditions hereinafter mentioned.
Now this agreement witness and it is agreed by and between both the parties as follows:
The term “Agreement”, wherever used in this connection, shall mean and include the terms and conditions
in tender floated by the ESIC Medical college and Model hospital,K.K nagar, Chennai-78 for the supply of ORTHO
IMPLANTS for TWO year period with instructions to tenderer, the conditions of tender, acceptance of tender
particulars hereinafter defined and those general and special conditions that may be added from time to time.
If there is any disruption of supply without any valid reason, the loss to the hospital should be compensated
by the Contractor, not exceeding the cost of the items. Also suitable action as deemed fit will be initiated from ESIC
Medical College and Model Hospital, K.K nagar, Chennai-78.
Further, in the event of late delivery, ESIC Medical College and Model hospital is entitled to recover from
the contractor by way of liquidated damage a sum equal to 5% of the price of the stores delivered late.
This Agreement shall be deemed to have come into force with effect from _________ and it shall remain in force
for a period upto date of _______ and may however be extended for a further period, on mutually agreed terms.
Signed Authorised Signatory
Dean, ESIC Medical College and Model Hospital, Name fo the Contrator(Withfull
address for Communication)
K.Knagar, Chennai-600 078.
Disputes and Jurisdiction: Wherever disputes arise during implementation of a contract,
legal advice should be sought before initiating action to refer the dispute to conciliation and / or
arbitration as provided in the contract or to file a suit in the jurisdiction of Madras.
• Delivery Schedule : Within 14 days from the date of purchase order. The delivery should be at
the place shown by the receiving officer within the premises of the ESIC Hospital, K.K.Nagar at
the cost of the supplier. For imported items, an enhanced delivery period, if required can be
agreed and the same should be indicated clearly.
• No articles shall be supplied to the hospital except on requisition in writing signed by the Dean
or by an officer authorized by him/her in writing to do so.
• Penalty : If the successful tenderer fails to execute the supply within the stipulated period,
penalty of 5% of the value of the order will be levied. Failure to execute the supply will lead to
cancellation of supply order and the Performance security will stand forfeited and the vendor
will not be allowed to participate in the re-tender for the items.
• Payment :The payment towards the supply is subject to receipt of inspection note/performance
certificate to the effect that the items supplied are conforming to the purchase order placed.
• PG:6
SCHEDULE OF REQUIREMENTS OF ORTHO IMPLANTS ITEMS: Annexure-III
TECHNICAL DETAILS:
ANNEXURE –IV
TENDER FOR THE SUPPLY OF ORTHO IMPLANTS FOR THE ESIC HOSPITAL, K.K NAGAR CHENNAI-78
From
__________________
__________________
__________________
__________________
To
The DEAN,
ESIC Hospital, K.K.Nagar,
Chennai - 600 078.
Sub: Request for refund of EMD Amount – reg.
* * *
We have pleasure in submitting our tenders for the ……………………………….;……..as per
.Annexure -I…………………………
We enclose herewith a Demand Draft No. ………………..Dt………….. for Rs. /-- drawn in favor of
ESIC Fund A/c. No:1 payable at Chennai towards Earnest money Deposit.. We bind ourselves to the conditions
prescribed in the Tender Notification. We agree to have the Earnest money forfeited in case of failure in full or
part to undertake the contract upon the acceptance of this tender.
With reference to your advertisement dated __________________, we have submitted tender for
____________ (Orthopedic Implants ).In case we are not the successful bidder, we request you to kindly refund
the EMD amount of Rs._______. Through ECS may be kindly be drawn in favor of___________________
Beneficiary’s Name :
Account No. :
A/C Savings Current :
IFSC Code No. :
Bank Name :
Branch Name & Address :
Yours faithfully,
(SIGNATURE & SEAL)
PRE-RECEIPT
Received an amount of Rs…………………………… vide cheque No..........................dated.................. from ESI
Corporation towards refund of EMD amount.
Revenue
Stamp
(SIGNATURE & SEAL)
PG:7
ANNEXURE – V
Tender Application Form (TECHNICAL BID)
1 Name of the firm:-
2
a Full Postal Address:-
b Cell Phone No.
c Telephone No:-
d Fax No.
e Email Id:
3 Date of Establishment of Firm:-
4
a If your Firm Registered under:-
b The Indian Factories Act:-
c Any other Act, if not, who are the owners (Please give full address):-
5 Name and Address of your Bankers stating the name in which the
Account stands:-
6 Whether insured against fire, theft, burglary etc. If so, please state the
amount and name of company with policy no:-
7 Total number of Employees:-
8 Are you in the list of approved contractors of any other organizations /
institutions, if any give details (Append extra page if necessary):-
9 Give details of any Government contracts executed during the last
twelve months (Append extra page if necessary):-
10 Any other information which you consider necessary to furnish:
UNDERTAKING:
a. I, the undersigned certify that I have gone through the Conditions of Contract mentioned in the tender document
and undertake to comply with them.
b. The rates quoted by me are valid and binding upon me for the entire period of contract and it is certified that the
rates quoted are the lowest quoted for any other institution/ hospital in India.
c. I/ We give the rights to Dean, ESI-PGIMSR,ESIC Medical College and ESIC Hospital Chennai to forfeit the
EMD/Security money deposit by me/us if any delay occur on my part/ failure to supply the article within the
stipulated date and time or of the desired quality a per specification.
d. There is no vigilance/CBI case or court case pending against the firm.
e. I hereby to undertake to complete the work as pr directions given in the tender document /work order with
stipulated period.
f. I hereby certify that none of the family member (s) is/ are employed in ESIC as per details given in the tender
document. In case at any stage, it is found that information given by me is false/ incorrect. ESIC Medical College and
Hospital Chennai shall have the absolute right to take any action as deem fit. The decision of the Dean and legally
binding to me / us in such cases.
Date:- Signature of the tenderer:-
Place:- Full Name:-
Designation:-
(Office seal of the tenderer):-
PG:8
ANNEXURE-VI
DECLARATION FORM
We ………………………………………………………………..having our office
at………………………………………………………………………………….do declare that we have carefully
read all the conditions of Tender for the supply of Orthopedic Implants and abide by all the conditions set forth
therein by the DEAN, ESIC Medical College and Model Hospital , K.K.Nagar, Chennai 78.
We further declare that we ……..………………………..possesses valid license bearing
No…………………………………………………… valid upto……..
DATE: SIGNATURE:
SEAL:
NAME & ADDRESS:
SCHEDULE OF PRICE BID (ANNEXURE-VII)
FORMAT FOR QUOTATION OF RATE FOR SUPPLY OF ORTHO IMPLANTS TO THE ESIC
HOSPITAL K.K NAGAR, CHENNAI-78.
Tenderer must quote the rates strictly as per the given format.
* Rates both in numbers and words Comparative Price evaluation of the above items will be done on the basis of price per unit as
applicable.
Item
No.
Item Name and
Specification
Manufacturer
/ Brand
Authorized
Dealer
Packing Rate per
Unit in (Rs)
GST%
THE FIRM IS REQUESTED TO FOLLOW THE CHECK LIST AT THE TIME OF SUBMISSION OF TENDER DOCUMENT WITHOUT WHICH THE OFFER IS LIABLE TO BE CANCELLED.
1 The Demand Draft for EMD to be submitted before the time period of
Opening of tender.(Without fail or any Delay) Failing which directly liable
to rejected from the participation of tender. Even though fee paid for online
processing of the tender .
Submitted [Yes / No ]
2 Valid Trade License Submitted [Yes / No ]
3 GST/PAN/TAN other statutory documents Submitted [Yes / No ]
4 The average Annual Turnover of the tenderer in the preceding 3 years Submitted [Yes / No ]
5 Tenderer to give an affidavit that the company has not been blacklisted by
any Govt./Semi Govt./Govt. Undertaking /Institution During last three
years &Bank Details
Submitted [Yes / No ]
6 Supplier should provide certificate regarding rate quoted as per
instructions
Submitted [Yes / No ]
7 Satisfactory performance Certificate from a Govt. Institution/ Reputed
Institution for last three years
Submitted [Yes / No ]
8 Undertaking on Non-Judicial stamp paper of Rs.100/- Submitted [Yes / No ]
THE DEAN OF MEDICAL COLLEGE AND MODEL HOSPITAL CHENNAI-78 , HAS THE
RIGHT AND DISCRETION TO ACCEPT OR REJECT OR CANCEL THE TENDER/TENDER PROCESS AT
ANY STAGE WITHOUT ASSIGNING ANY REASON .
Dated :
Signature of Authorized Signatory
(With rubber stamp)
PG:9
SCHEDULE OF REQUIREMENTS OF ORTHO IMPLANTS ITEMS: Annexure-III
Item No.
Item Name and
Specification
1 3.5 mm Asian DCP 4 holes to maximum length
2 4 holes
3 5 holes
4 6 holes
5 7 holes
6 8 holes
7 9 holes
8 10 holes
9 11 holes
10 12 holes
11 13 holes
12 14 holes and above
13 3.5 mm cortical screws
14 10mm
15 12mm
16 14mm
17 16mm
18 18mm
19 20mm
20 22mm
21 24mm
22 26mm
23 28mm
24 30mm
25 35mm
26 40mm
27 45mm
28 50mm
29 1/3rd tubular plate 4 holes to maximum holes
30 4 holes
31 5 holes
32 6holes
33 7 holes
34 8 holes
35 9 holes
36 10 holes
37 11 holes
38 12 holes
39 4.0mm cancellous screws smallest to longest
40 20mm
41 25mm
42 30mm
43 35mm
44 40mm
45 45mm
46 50mm
47 55mm
48 60mm
49 65mm
50 70mm
51 75mm
52 80mm
53 85mm
54 90mm
55 others
56 3.5 mm Reconstruction plates (smallest to longest )
57 4 holes
58 5 holes
59 6 holes
60 7 holes
61 8 holes
62 9 holes
63 10 holes
64 11holes
65 12 holes
66 13 holes
67 14 holes
68 15 holes
69 Y plates 3.5mm - smallest to longest
70 3 holes
71 4 holes
72 5holes
73 6 holes
74 7holes
75 4.5 mm Narrow DCP - smallest to longest
76 6 holes
77 7 holes
78 8 holes
79 9 holes
80 10 holes
81 11 holes
82 12 holes
83 13 holes
84 14 holes
85 others
86 4.5 mm Broad DCP - smallest to longest
87 6 holes
88 7 holes
89 8 holes
90 9 holes
91 10 holes
92 11 holes
93 12 holes
94 13 holes
95 14 holes
96 others
97 4.5 mm cortical screws
98 10mm
99 12mm
100 14mm
101 16mm
102 18mm
103 20mm
104 22mm
105 24mm
106 26mm
107 28mm
108 30mm
109 35mm
110 40mm
111 45mm
112 50mm
113 others
114 6.5 mm Cancellous screws
115 20mm
116 25mm
117 30mm
118 35mm
119 40mm
120 45mm
121 50mm
122 55mm
123 60mm
124 65mm
125 70mm
126 75mm
127 80mm
128 85mm
129 90mm
130 95mm
131 100mm
132 105mm
133 others
134 4.0 mm Cannulated Cancellous screws
135 20mm
136 25mm
137 30mm
138 35mm
139 40mm
140 45mm
141 50mm
142 55mm
143 60mm
144 65mm
145 70mm
146 75mm
147 80mm
148 85mm
149 90mm
150 95mm
151 100mm
152 others
153 Guide wire for 4.0 mm Cannulated Cancellous screws
154 Drill bit for 4.0 mm Cannulated Cancellous screws
155 6.5mm Cannulated Cancellous screws
156 20mm
157 25mm
158 30mm
159 35mm
160 40mm
161 45mm
162 50mm
163 55mm
164 60mm
165 65mm
166 70mm
167 75mm
168 80mm
169 85mm
170 90mm
171 95mm
172 100mm
173 others
174 Guide wire for 6.5 mm Cannulated Cancellous screws
175 Drill bit for 6.5mm Cannulated cancellous screw
176 4.5 mm Malleolar screw
177 40mm
178 45mm
179 50mm
180 55mm
181 60mm
182 65mm
183 70mm
184 75mm
185 80mm
186 others
187 3.2 mm Drill bit
188 3.5mm drill bit
189 4 mm drill bit
190 4.5 mm drill bit
191 others
192 2.00 mm drill bit / /
193 2.5 mm Drill bit.
194 2.7 mm drill bit
195 4.5 mm Semi tubular plate titanium ( smallest to longest )
196 4 holes
197 5 holes
198 6holes
199 7 holes
200 8 holes
201 9 holes
202 10 holes
203 11 holes
204 12 holes
205 4.5mm T buttress plates - smallest to longest
206 4 holes
207 5 holes
208 6holes
209 7 holes
210 8 holes
211 9 holes
212 10 holes
213 11 holes
214 12 holes
215 4.5mm L Buttress plates – smallest to longest
216 4 holes
217 5 holes
218 6holes
219 7 holes
220 8 holes
221 9 holes
222 10 holes
223 11 holes
224 12 holes
225 4.5 mm clover Leaf plate smallest to longest
226 4 holes
227 5 holes
228 6holes
229 7 holes
230 8 holes
231 9 holes
232 10 holes
233 11 holes
234 12 holes
235 4.5 mm Lateral tibial plate – smallest to longest
236 4 holes
237 5 holes
238 6holes
239 7 holes
240 8 holes
241 9 holes
242 10 holes
243 11 holes
244 12 holes
245 13 holes
246 14 holes
247 15 holes
248 3.5 mm T buttress plate – smallest to longest
249 4 holes
250 5 holes
251 6holes
252 7 holes
253 8 holes
254 9 holes
255 10 holes
256 11 holes
257 12 holes
258
K-wires
1mm
259 1.2mm
260 1.5mm
261 1.8mm
262 2.0mm
263 2.5 mm
264 3.0mm
265 4.0mm
266 SS WIRES 16 G
267 18G
268 20G
269 22 G
270
TITANIUM elastic Nail
2.00 mm
271 2.5mm
272 3.0mm
273 3.5mm
274 4.0mm
275 DHS plate 4 holes
276 5 holes
277 6holes
278 7 holes
279 8 holes
280 9 holes
281 10 holes
282 11 holes
283 12 holes
284 13 holes
285 14 holes
286 15 holes
287 DCS Plate 4 holes
288 5 holes
289 6holes
290 7 holes
291 8 holes
292 9 holes
293 10 holes
294 11 holes
295 12 holes
296 13 holes
297 14 holes
298 15 holes
299 Double angled blade plate 6 holes
300 6.5mm lag screw for DHS AND DCS PLATES 45mm
301 50mm
302 55mm
303 60mm
304 65mm
305 70mm
306 75mm
307 80mm
308 85mm
309 90mm
310 95mm
311 100mm
312 others
313 Guide wire for DCS and DHS plate
314 Universal external fixator
315 - Rod smallest ot longest
316 150 mm
317 200 mm
318 250 mm
319 300 mm
320 350 mm
321 400 mm
322 - Steinmann pin of length 220 mm
323 3 mm
324 4 mm
325 5 mm
326 6 mm
327 - Conical Schanz screw
328 4.5mm
329 5.0 mm
330 6.0 mm
331 - Universal clamps
332 - Tube to tube clamp
333 - T-Clamp
334 Limb Reconstruciton System ( LRS )
335 - Conical Scahnz Screw
336 5 mm
337 6 mm
338 - Railing with 3 clamps
339 - Railing with 4 clamps
340 - Railing with transverse clamps ( T Clamp )
341 - orthofix T ball and scoket clamp
342 - orthofix sweil clamp
343 - ortho fix T clamp
344 - orthofix trochanteric clamp.
345 - allen key
346 - Compression and Distraction unit
347 - 4.3 drill bit
348 Limb reconstruciton sysem for forearm and Paediatric
349 - Railing with 3 clamps
350 - conical schanz srew
351 3 mm
352 4 mm
353 Drill bit
354
Pennigs external fixator including 4 schanz screw and allen key and 2 mm drill
bit
355 Illizarov ring fixator
356 - Conical schanz screw
357 4.5 mm
358 5.00 mm
359 6.0 mm
360 - Bayonet K-wire 1.8mm
361 - Olive wire1.8mm
362 - Nuts
363 - Bolts
364 10 mm
365 16 mm
366 - Wire fixation bolt
367 slotted/
368 cannulated
369 - Threaded rod
370 150 mm
371 200 mm
372 250 mm
373 300 mm
374 350 mm
375 400 mm
376 - Male post
377 2 holes
378 3 holes
379 4 holes
380 - Female post
381 2 holes
382 3 holes
383 4 holes
384 - Rancho cubes
385 1 hole
386 2 holes
387 3 holes
388 - Extension p late
389 2 holes
390 3 holes
391 4 holes
392 5 holes
393 - Clamps for hybrid fixator
394 - Spanner size ( box in one side and normal type in other side)
395 10mm/11mm
396 12mm/13mm
397 - Hinges male and female
398 - CARBON Half ring
399 80mm
400 100mm
401 120mm
402 140mm
403 160mm
404 180mm
405 200mm
406 220mm
407 240mm
408 - CARBON 5/8 ring
409 140mm
410 160mm
411 180mm
412 - Washers ordinary
413 - Washers conical
414 - Illizarov Telescopic Graduated Distraction Rod of various length
415 Femur Interlocking Nailing – piriformis entry point
416 Interlocking Nail
417 Interlocking screws
418 Interference screws 8mm/9mm of all sizes
419 8 mm x 20 mm
420 8 mm x 25 mm
421 8 mm x 30 mm
422 8 mm x 35 mm
423 8 mm x 40 mm
424 9 mm x 20 mm
425 9 mm x 25 mm
426 9 mm x 30 mm
427 9 mm x 35 mm
428 9 mm x 40 mm
429 Coventry staples
430 Ordinary staplles
431 120 degree angled blade plate for hip joint surgery 4 holed
432 Suture Anchor
433 2.4 mm with needle
434 2.8 mm
435 3.0 mm
436 3.0 mm ( absorbable )
437 3.5 mm
438 4.5 mm
439 5.0 mm
440 5.5 mm
441 5.5 mm ( absorbable )
442 Suture anchor inserter with trochar and cannula
443 AC joint Tie brow system implant
444 Square nail of all sizes for radius
445 2.0 mm
446 2.5 mm
447 3.0 mm
448 3.5 mm
449 4.0 mm
450 ACL Reconstruction implants ( for tibial side and endobutton on femoral side )
451 bioabsorable screws – 20 mm
452 bioabsorable screws – 25 mm
453 bioabsorable screws – 30 mm
454 bioabsorable screws - 35mm
455 bioabsorable screws – 40 mm
456 Endobutton
457 Bioabsorable screws of various types and sizes.
458 4 mm x 30 mm
459 4 mm x 35 mm
460 4 mm x 40 mm
461 4 mm x 45 mm
462 4 mm x 50 mm
463 4.5 mm x 30 mm
464 4.5 mm x 35 mm
465 4.5 mm x 40 mm
466 4.5 mm x 45 mm
467 4.5 mm x 50 mm
468 3 mm x 20 mm
469 3 mm x 25 mm
470 3 mm x 30 mm
471
Proximal humerus Locking compression Plate with corresponding locking and
cortical screws
472 3 hole plate
473 4 hole plate
474 5 hole plate
475 6 hole plate
476 7 hole plate
477 8 hole plate
478 9 hole plate
479 10 hole plate
480 11 hole plate
481 12 hole plate
482 13 hole plate
483 3.5 mm locking compression screws
484 3.5 mm cortical screws
485 Cannulated locking screws
486
Proximal humerus periarticular locking compression plate ( of various lengths)
with corresponding locking and cortical screws
487 2 hole plate
488 3 hole plate
489 4 hole plate
490 5 hole plate
491 7 hole plate
492 9 hole plate
493 11 hole plate
494 3.5 mm locking compression screws
495 3.5 mm cortical screws
496 Cannulated locking screws
497 4mm Cansellous screws
498
4.5mm Broad/ Narrow DCP Locking compression plate ( of various lengths )
with screws
499 4 hole plate
500 5 hole plate
501 6 hole plate
502 7 hole plate
503 8 hole plate
504 9 hole plate
505 10 hole plate
506 11 hole plate
507 12 hole plate
508 13 hole plate
509 14 hole plate
510 15 hole plate
511 4.5 mm/5.00 mm locking compression screws
512 4.5 mm cortical screws
513
Distal Humerus Locking compression plate for Medial side ( of various lengths )
with corresponding locking and cortical screws
514 3 hole plate
515 4 hole plate
516 5 hole plate
517 6 hole plate
518 7 hole plate
519 8 hole plate
520 9 hole plate
521 10 hole plate
522 11 hole plate
523 12 hole plate
524 13 hole plate
525 14 hole plate
526 3.5 mm locking compression screws
527 3.5 mm cortical screws
528 Cannulated locking screws
529 2.7 mm locking screws
530 2.4 mm locking screws
531
Distal Humerus Locking compression plate for lateral side - dorsolateral with
corresponding locking and cortical screws
532 3 hole plate
533 4 hole plate
534 5 hole plate
535 6 hole plate
536 7 hole plate
537 8 hole plate
538 9 hole plate
539 10 hole plate
540 11 hole plate
541 12 hole plate
542 13 hole plate
543 14 hole plate
544 3.5 mm locking compression screws
545 3.5 mm cortical screws
546 Cannulated locking screws
547 2.7 mm locking screws
548 2.4 mm locking screws
549
Distal Humerus variable angle Locking compression plate for Medial side ( of
various lengths ) with corresponding locking and cortical screws
550 1 hole plate
551 2 hole plate
552 3 hole plate
553 4 hole plate
554 5 hole palte
555 6 hole plate
556 7 hole plate
557 8 hole plate
558 3.5 mm locking compression screws
559 3.5 mm cortical screws
560 Cannulated locking screws
561 2.7 mm locking screws
562 2.4 mm locking screws
563
Distal Humerus variable angle Locking compression plate for lateral and
dorsolateral aspect ( of various lengths ) with corresponding locking and cortical
screws
564 1 hole plate
565 2 hole plate
566 3 hole plate
567 4 hole plate
568 5 hole palte
569 6 hole plate
570 7 hole plate
571 8 hole plate
572 3.5 mm locking compression screws
573 3.5 mm cortical screws
574 Cannulated locking screws
575 2.7 mm locking screws
576 2.4 mm locking screws
577
Humerus shaft to lateral condylar locking compression extension plate with
corresponding locking and cortical screws ( distasl humerus extra articular
locking plate )
578 6 holes plate
579 7 holes plate
580 8 holes plate
581 9 hole plate
582 10 hole plate
583 4.5 mm cortical screws
584 4.5mm/5.00mm locking screws
585 3.5 mm cortical screws
586 3.5 mm locking compression screws
587
Proximal olecranon/ulna locking compression plate ( of various lengths ) with
corresponding locking and cortical screws
588 3 hole plate
589 4 hole plate
590 5 hole plate
591 6 hole plate
592 7 hole plate
593 8 hole plate
594 9 hole plate
595 10 hole plate
596 11 hole plate
597 12 hole plate
598 2.7 mm locking screws
599 3.5 mm locking screws
600 3.5 mm cortical screws
601
Proximal olecranon/ulna hook plate with corresponding locking and cortical
screws (side specific if there preferable )
602 3 hole plate
603 4 hole plate
604 5 hole plate
605 6 hole plate
606 7 hole plate
607 8 hole plate
608 9 hole plate
609 10 hole plate
610 11 hole plate
611 12 hole plate
612 2.7 mm locking screws
613 3.5 mm locking screws
614 3.5 mm cortical screws
615
Distal radius variable angle locking compression plate with corresponding
locking and cortical screws ( sterile/non -sterile)
616 3 hole plate
617 4 hole plate
618 5 hole plate
619 2.4 mm variable angle locking compression screws
620 2.4 mm cortical screws
621 2.7 mm cortical screws
622
Distal radius periarticular Locking compression plate with corresponding
locking and cortical screws
623 3 hole plate
624 4 hole plate
625 5 hole plate
626 7 hole plate
627 2.4 mm locking compression screws
628 2.4 mm cortical screws
629 2.5 mm cortical screws
630 3.5mm cortical screws
631 2.5mm locking screws
632
Distal radius juxtra articular Locking compression plate with corresponding
locking and cortical screws
633 3 hole plate
634 4 hole plate
635 5 hole plate
636 2.4 mm locking compression screws
637 2.4 mm cortical screws
638 2.7 mm cortical screws
639
Distal radius dorsal locking compression plate straight and angled and oblique
with corresponding locking and cortical screws
640 3 hole L plate
641 4 holeL plate
642 5 hole L plate
643 3 hole T plate
644 4 hole T plate
645 5 hole T plate
646 2.4 mm locking compression screws
647 2.4 mm cortical screws
648 2.7 mm cortical screws
649
Distal radius T locking compression plate with corresponding locking and
cortical screws ( the longest plate should aid in fixation of metaphyseo-diaphyseal
fracture fixation)
650 3 hole plate
651 4 hole plate
652 5 hole plate
653 6 hole plate
654 7 hole plate
655 8 hole plate
656 9 hole plate
657 10 hole plate
658 11 hole plate
659 12 hole plate
660 2.7 mm locking screws
661 3.5 mm locking screws
662 3.5 mm cortical screws
663 2.4 mm locking screws
664 3.5 mm Locking compression plate and screws
665 3 hole plate
666 4 hole plate
667 5 hole plate
668 6 hole plate
669 7 hole plate
670 8 hole plate
671 9 hole plate
672 10 hole plate
673 11 hole plate
674 12 hole plate
675 15 hole plate
676 3.5 mm cortical screws
677 3.5 mm locking compression screws
678
Distal femur lateral side locking compression plate of various lengths with
corresponding locking and cortical screws( preferable with MIS instruments)
679 4 hole plate
680 5 hole plate
681 6 hole plate
682 7 hole plate
683 8 hole plate
684 9 hole plate
685 10 hole plate
686 11 hole plate
687 12 hole plate
688 13 hole plate
689 14 hole plate
690 15 hole plate
691 16 hole plate
692 17 hole plate
693 18 hole plate
694 19 hole plate
695 4.5 mm/5.00 mm locking compression screws
696 4.5 mm cortical screws
697 6.5mm Cancellous screws
698 6.5 mm conical cancellous screw
699
Proximal tibial lateral locking compression plate 3.5mm with corresponding
locking and cortical screws
700 3 hole plate
701 4 hole plate
702 5 hole plate
703 6 hole plate
704 7 hole plate
705 8 hole plate
706 9 hole plate
707 10 hole plate
708 11 hole plate
709 12 hole plate
710 13 hole plate
711 14 hole plate
712 15 hole plate
713 3.5 mm locking compression screws
714 3.5 mm cortical screws
715 3.5 mm cannulated locking compression screws
716 4.00 mm partially threaded cancellows screws
717
Proximal tibial lateral locking compression plate 4.5/5.00 mm system with
corresponding locking and cortical screws
718 3 hole plate
719 4 hole plate
720 5 hole plate
721 6 hole plate
722 7 hole plate
723 8 hole plate
724 9 hole plate
725 10 hole plate
726 11 hole plate
727 12 hole plate
728 13 hole plate
729 14 hole plate
730 15 hole plate
731 4.5mm cortical screws
732 4.5mm/5.00 mm locking compression screws
733 6.5 mm cancellous screws partially threaded
734 Medial High tibial osteotomy Plate
735 4 holes
736 4.5 mm coritical screws
737 5.0 mm locking compression screws
738 Lateral high tibial osteotomy Plate
739 3 holes
740 4.5 mm coritical screws
741 5.0 mm locking compression screws
742 Lateral distal femur osteotomy Plate
743 4 holes
744 4.5 mm coritical screws
745 5.0 mm locking compression screws
746 Metaphyseal Plate 3.5/4.5/5.0
747 3 hole plate
748 4 hole plate
749 5 hole plate
750 6 hole plate
751 7 hole plate
752 8 hole plate
753 9 hole plate
754 10 hole plate
755 11 hole plate
756 12 hole plate
757 13 hole plate
758 14 hole plate
759 15 hole plate
760 4.5mm cortical screws
761 4.5mm/5.00 mm locking compression screws
762 3.5 mm Locking compression screws
763 3.5 mm cortical screws
764 Proximal tibial L buttress locking copression plates 4.5/5 mm system
765 3 hole plate
766 4 hole plate
767 5 hole plate
768 6 hole plate
769 7 hole plate
770 4.5mm cortical screws
771 4.5mm/5.00 mm locking compression screws
772 Proximal tibial T buttress locking compression 4.5/5 mm
773 3 hole plate
774 4 hole plate
775 5 hole plate
776 6 hole plate
777 7 hole plate
778 4.5mm cortical screws
779 4.5mm/5.00 mm locking compression screws
780
Proximal tibial posteromedial locking compression plate ( preferable if variable
angle )and corresponding locking and cortical screws
781 3 hole plate
782 4 hole plate
783 5 hole plate
784 6 hole plate
785 7 hole plate
786 8 hole plate
787 9 hole plate
788 10 hole plate
789 11 hole plate
790 12 hole plate
791 3.5 mm variable angle locking compression screws
792 3.5 mm variable angle cortical screws
793
Proximal tibial Medial tibial locking compression plate with corresponding
locking and cortical screws
794 3 hole plate
795 4 hole plate
796 5 hole plate
797 6 hole plate
798 7 hole plate
799 8 hole plate
800 9 hole plate
801 10 hole plate
802 11 hole plate
803 12 hole plate
804 13 hole plate
805 14 hole plate
806 15 hole plate
807 17 hole plate
808 18 hole plate
809 19 hole plate
810 20 hole plate
811 3.5 mm locking compression screws
812 3.5 mm cortical screws
813
Distal Medial Tibial Locking compression plate with corresponding locking and
cortical screws
814 3 hole plate
815 4 hole plate
816 5 hole plate
817 6 hole plate
818 7 hole plate
819 8 hole plate
820 9 hole plate
821 10 hole plate
822 11 hole plate
823 12 hole plate
824 13 hole plate
825 14 hole plate
826 15 hole plate
827 3.5 mm locking compression screws
828 3.5 mm cortical screws
829
Distal tibial anterolateral locking compression plate with corresponding locking
and cortical screws
830 3 hole plate
831 4 hole plate
832 5 hole plate
833 6 hole plate
834 7 hole plate
835 8 hole plate
836 9 hole plate
837 10 hole plate
838 11 hole plate
839 12 hole plate
840 13 hole plate
841 14 hole plate
842 15 hole plate
843 3.5 mm locking compression screws
844 3.5 mm cortical screws
845 Calcaneal Locking compression plate 3.5 mm system
846 3.5 mm plate
847 3.5 mm locking compression screws
848 3.5 mm cortical screws
849 Clavicle Locking compression plates 3.5 mm
850 6 hole plate
851 7 hole plate
852 8 hole plate
853 9 hole plate
854 10 hole plate
855 11 hole plate
856 12 hole plate
857 3.5 mm locking compression screws
858 3.5 mm cortical screws
859
Clavicle Locking compression plates for lateral clavicular fracture with
corresponding locking and cortical screws
860 6 hole plate
861 7 hole plate
862 8 hole plate
863 9 hole plate
864 10 hole plate
865 11 hole plate
866 12 hole plate
867 3.5 mm locking compression screws
868 3.5 mm cortical screws
869 2.7mm locking compression screws
870 Subacromial lateral clavicular hook plate
871 3 hole plate
872 4 hole plate
873 5 hole plate
874 3.5 mm locking compression screws
875 3.5 mm cortical screws
876 2.7mm locking compression screws
877
3.5 mm Pelvic Reconstruction plate of various sizes and lengths ( this only in
stainless steel )
878 3.5 mm Straight Pelvic Reconstruction plates
879 5 holes
880 6 hole plate
881 7 hole plate
882 8 hole plate
883 9 hole plate
884 10 hole plate
885 11 hole plate
886 12 hole plate
887 13 hole plate
888 14 hole plate
889 15 hole plate
890 16 hole plate
891 17 hole plate
892 18 hole plate
893 19 hole plate
894 20 hole plate
895 21 hole plate
896 22 hole plate
897 PELVIC J Plate
898 10 hole plate
899 11 hole plate
900 12 hole plate
901 13 hole plate
902 14 hole plate
903 15 hole plate
904 16 hole plate
905 Reconstruction plate 3.5 mm Low profile straight
906 3 hole plate
907 4 hole plate
908 5 holes
909 6 hole plate
910 7 hole plate
911 8 hole plate
912 9 hole plate
913 10 hole plate
914 11 hole plate
915 12 hole plate
916 13 hole plate
917 14 hole plate
918 15 hole plate
919 16 hole plate
920 17 hole plate
921 18 hole plate
922 19 hole plate
923 20 hole plate
924 21 hole plate
925 22 hole plate
926 Reconstruction low profile 3.5 curved plate
927 6 hole plate
928 7 hole plate
929 8 hole plate
930 9 hole plate
931 10 hole plate
932 11 hole plate
933 12 hole plate
934 13 hole plate
935 14 hole plate
936 15 hole plate
937 16 hole plate
938 PELVIC spring plate 3.5
939 Symphyseal plate 3.5
940
3.5mm Long cortical screws stainless for to be used in 3.5 mm pelvic
reconstruction plates
941 10 mm to 50 mm
942 55 to 110 mm
943 Drill bit
944 Headless compression screws of various sizes 2.4 mm
945 20mm
946 22mm
947 24mm
948 26mm
949 28mm
950 30 mm
951 32mm
952
Metacarpal and metatarsal plates and also for Phalanges ( including L and T
plate and straight ) Locking compression plates with corresponding locking and
cortical screws
953 Adapt plates 1.5/2.omm
954 Strut plates o blique andle 1.5/2.0 mm
955 T plate 1.5/2.0mm
956 Y plate 1.5/2.0mmMinii condyl eplates 1.5/2.0mm
957 LCP 2 straight plates
958 LCP T plate 2 shaft plates
959 Cortical screws 1mm ( 6 to 14 mm)
960 Cortical screws 1.3mm ( 6 to 18 mm)
961 Cortical screws 1.5mm ( 6 to 24 mm)
962 Cortical screws 2 mm ( 6 to 38 mm)
963 Cortical screws 2.4mm ( 10 to 30 mm)
964 Cortical screws 2.7mm ( 10 to 30 mm)
965 Locking screws 2 mm 6 to 30 mm
966 Locking screws 2.7 mm 6 to 30 mm
967 Distal Ulna hook plate
968 Plate
969 Cortical screws 2 mm ( 6 to 38 mm)
970 Cortical screws 2.4mm ( 10 to 30 mm)
971 Cortical screws 2.7mm ( 10 to 30 mm)
972 Locking screws 2.4 mm 6 to 30 mm
973 Locking screws 2.7 mm 6 to 30 mm
974 TALUS Plate 2.4/2.7mm
975 Cortical screws 2.4mm ( 10 to 30 mm)
976 Cortical screws 2.7mm ( 10 to 30 mm)
977 Locking screws 2.4 mm 6 to 30 mm
978 Locking screws 2.7 mm 6 to 30 mm
979 Other special locking plates and corresponding screws
980
Periprosthetic fracture fixation system ( it includes fractures in and around
hip,knee,shoulder replacement ) - mention the plate with corresponding screws ,
cable system, special attachment plate with corresponding screws if any to be
included in the system
981 4.5/5.00 Broad curved locking plate
982 12 hole plate
983 13 hole plate
984 14 hole plate
985 15 hole plate
986 4.5/5.00 Broad curved locking plate
987 16 hole plate
988 17 hole plate
989 18 hole plate
990 19 hole plate
991 20 hole plate
992 21 hole plate
993 22 hole plate
994 4.5 mm cortical screws
995 4.5/5.0mm locking compression screws
996 Cables
997 Locking Attachment plate 3.5 for 4.5/5.0
998 4 holes
999 8 holes
1000 3.5 mm locking screws
1001 Variable angle condylar plate 4.5/5.0
1002 6 hole plate
1003 8 hole plate
1004 10 hole plate
1005 12 hole plate
1006 14 hole plate
1007 16 hole plate
1008 18 hole plate
1009 Variable angle locking periprosthetic screws 4.5/5.0mm ( 8 to 20 mm )
1010 Variable angle locking screws 4.5/5.0mm (14 to 100 mm)
1011 Variable angle cannulated locking screws 4.5/5.0mm 20 to 100 mm
1012 4.5 mm cortical screws 18 to 38 mm
1013 4.5 mm cortical screws 40 to 70 mm
1014 4.5/5.00 mm locking head screws
1015 Variable angle Proximal Tibial plate 3.5 small bend
1016 4 hole plate
1017 6 hole plate
1018 8 hole plate
1019 10 hole plate
1020 12 hole plate
1021 14 hole plate
1022 Variable angle locking screws 3.5 mm (10 to 95 mm)
1023 3.5 mm Locking head screws ( 10 to 75 mm )
1024 3.5 mm cortical screws ( 10 to 50 mm )
1025 Variable angle Proximal Tibial plate 3.5 Large bend
1026 4 hole plate
1027 6 hole plate
1028 8 hole plate
1029 10 hole plate
1030 12 hole plate
1031 14 hole plate
1032 Variable angle locking screws 3.5 mm (10 to 95 mm)
1033 3.5 mm Locking head screws ( 10 to 75 mm )
1034 3.5 mm cortical screws ( 10 to 50 mm )
1035
Proximal femoral locking compression plate with corresponding locking and
cortical screws( Preferable with MIS instruments to Avoid radiation)
1036 Proximal femoral plate
1037 2 holes to 10 holes plate
1038 12 to 18 hole plate
1039 5.7 mm cannulated locking screws
1040 4.5/5.0 mm locking screws
1041 4.5 cortical screws
1042 6.5 mm cancellous screws
1043 Cable and saddle system
1044 6.5mm conical cancellous screws
1045 1/3 tubular plate locking compression plate
1046 4 hole plate
1047 5 hole plate
1048 6 hole plate
1049 7 hole plate
1050 8 hole plate
1051 9 hole plate
1052 10 hole plate
1053 3.5 mm locking compression screws
1054 3.5 mm cortical screws
1055
Proximal radial bone locking compression plate with corresponding locking and
cortical screw
1056 Proximal Radius plate 2.4 for radial head rim 2 to 4 holes
1057 Proximal Radius plate 2.4 for radial neck 2 T 4 holes
1058 2.4 mm locking compression screws
1059 2.7 mm cortical screws
1060 Antibiotic Absorbale bone cement
1061
Synthetic recrystallised Hemihydrate calcium sulphate, Kit to prepare antibiotic
impregnated resorbable pellets for delivery of antibiotics locally
1062 5cc
1063 10 cc
1064 Bone morphogenic protein
1065 Artificial Bone graft substitutes of various sizes and shapes.
1066 a.Injectable synthetic bone graft susbsitute with all necessary kit
1067 5cc
1068 10cc
1069 15cc
1070 20cc
1071 b.Granules
1072 5cc
1073 10cc
1074 15cc
1075 20cc
1076 c.Wedges
1077 5cc
1078 10cc
1079 15cc
1080 20cc
1081 d. Blocks
1082 5cc
1083 10cc
1084 15cc
1085 20cc
1086
Tibial Interlocking Locking Nail with corresponding interlocking screws (
preferable to have distal targetic device to reduce radiation exposure during
insertion of distal interlocking screws )
1087
Tibial nail of sizes 8,8.5mm9,10 mm,11,12mm,13mm cannulated of length 280
mm to 410 mm
1088 End cap ( 0 to 20 mm )
1089 Locking screws 5/4.5mm for nailing
1090 Locking screws 4.00
1091 Other screws
1092
Expert Tibial Interlocking Nail with corresponding interlocking screws (
preferable to have distal targetic device to reduce radiation exposure during
insertion of distal interlocking screws )
1093 Tibial nail of sizes 8,8.5mm,9,10/11/12/13 mm cannulated ( 280 mm to 410 mm )
1094 End cap ( 0 to 20 mm )
1095 Locking screws 5/4.5mm for nailing 20mm to 50mm
1096 Locking screws 5/4.5mm for nailing 55mm to 110mm
1097 Locking screws 4.00
1098 Other screws
1099
Proximal Femoral Nail (PFN) short /Long Nail– screw / blade for proximal
locking
1100 PFN short 9 mm or 10mm to 13 mm
1101 PFN Long 9/10mm x 300 to 420 mm
1102 PFN Antirotation blade/ screw 60 to 120mm
1103 PFN end cap extension
1104 Locking screws 20mm to 50mm
1105 locking screws 55 to 110mm
1106
Humerus Interlocking Nail with corresponding interlocking screws ( preferable
to have distal targetic device to reduce radiation exposure during insertion of
distal interlocking screws ) with corresponding screws for interlocking
1107 Proximal Humeral nail with multiple locking option in varying diameters
1108 4. mm multilock screws
1109 3.5 mm locking head screws
1110 4.00 mm locking screws
1111 5mm locking screw
1112
Nail system for subtalar,tibiotalar , tibiocalcaneal, tibiotalocalcaneal joint
arthrodesis with all involved screws/blades.with distal targeting device
1113
Expert Hindfoot arthrodesis nail of varying diameters and lenghts 10mm to
11.5mm/12mm x160mm/200/250mm
1114 End cap for blade and screws
1115 Locking screw 6 mm
1116 Locking screw 5 mm ,20mm to 50mm
1117 Locking screw 5mm 55mm to 110mm
1118 Special screws if any
1119
Expert Femoral Nail ( preferable to have distal targetic device to reduce
radiation exposure during insertion of distal interlocking screws )
1120
Expert Antegrade femoral nail cannulated 9 mm/10mm to11.5mm/ 12 mm x 300
to 460 mm
1121 End cap
1122 Hip screw 6.4 mm 60 to 130 mm
1123 Locking screw 5 mm
1124
Distal femur Nail ( preferable to have distal targetic device to reduce radiation
exposure during insertion of distal interlocking screws )
1125 Cannulated nail 10,11.5 mm x200mm to 380 mm
1126 End cap
1127 Locking screw 6.00 mm
1128 Locking screw 5.00 mm
1129 Adoloscent Femur Nail system
1130 8.5mm Femur nail various size and right and left nail
1131 Locking screws 4.5mm 20mm to 50mm
1132 Locking screws 4.5mm 55 mm to 110mm
1133 Spatial frame for limb correction
1134 slotted washer having inner diameter 4mm and outer diameter 14mm
1135 fixation bolt washer having 2.0mm diameter
1136 fixation bolt washer having 4.0mm diameter
1137 connection bolts having 10.0mm length
1138 connection bolts having 16.0mm length
1139 connection bolts having 20.0mm length
1140 nut having 10mm hex head, 6mm Inner Diameter and 5mm thick
1141 4 point distraction and compression counter having 10mm square head
1142 rancho centering sleeve for 6mm half pin
1143 rancho cubes with 3 holes
1144 rancho cubes with 4 holes
1145 rancho cubes with 5 holes
1146 conical washer couple
1147 russian wire fixation bolt having an undercut for wire placement
1148 slotted long wire fixation bolt
1149 centering sleeve for 6 mm half pin to be used with angled pin connectors
1150 rancho cubes with post having one hole
1151 rancho cubes with post having two hole
1152 Angle pin connector having length of 35mm
1153 angle pin connector having length of 85mm
1154 extended connector short having length of 30mm
1155 extended connector long having length of 50mm
1156 wire combination fixation bolt having both centering hole and eccentric option
1157 sponges for wire
1158 orange colored protective half pin caps for 6mm halfpin
1159 orange colored disc clips for half pins
1160 disc clips for wires
1161 Identity band for fast fixation struts with numbers on them
1162 bayonet point wires having diameter of 1.8mm and length of 370mm
1163 wire with stopper having diameter of 1.8mm and length of 400mm
1164 threaded sockets having length of 20mm
1165 threaded sockets having length of 40mm
1166 threaded sockets having length of 30mm
1167 threaded sockets having length of 60mm
1168 male post with 2 holes
1169 male post with 3 holes
1170 male post with 4 holes
1171 standard male hinges
1172 low profile male hinges
1173 standard female hinges
1174 low profile female hinges
1175 short connection plate having 3 holes with length of 45mm
1176 short connection plate having 2 holes with length of 35mm
1177 threaded rod having length of 80mm
1178 threaded rod having length of 100mm
1179 threaded rod having length of 120mm
1180 threaded rod having length of 150mm
1181 threaded rod having length of 200mm
1182 threaded rod having length of 250mm
1183 low profile 90 degree hinge
1184 high profile 90 degree hinge
1185 Rings and Foot Plates
1186
Anodized Aluminium Full Rings having diameter of 155mm with 7 holes master
tab
1187
Anodized Aluminium Full Rings having diameter of 180mm with 7 holes master
tab
1188
Anodized Aluminium Full Rings having diameter of 205mm with 7 holes master
tab
1189 Anodized Aluminium Half Rings having diameter of 155mm
1190 Anodized Aluminium Half Rings having diameter of 180mm
1191 Anodized Aluminium Half Rings having diameter of 205mm
1192
Anodized Aluminium Two-Third Rings having diameter of 155mm with 7 holes
master tab
1193
Anodized Aluminium Two-Third Rings having diameter of 180mm with 7 holes
master tab
1194
Anodized Aluminium Two-Third Rings having diameter of 205mm with 7 holes
master tab
1195
Anodized Aluminium Full Rings having diameter of 130mm with 7 holes master
tab
1196 Anodized Aluminium Half Rings having diameter of 130mm
1197
Anodized Aluminium Two-Third Rings having diameter of 130mm with 7 holes
master tab
1198 Anodized Aluminium Long Foot Rings having diameter of 155mm
1199 Anodized Aluminium Long Foot Rings having diametter of 180mm
1200 Anodized Aluminium Short Foot Rings having diametter of 155mm
1201 Anodized Aluminium Short Foot Rings having diametter of 180mm
1202 Anodized Aluminium SF U Plate having inner diameter of 130mm
1203 Anodized Aluminium SF U Plate having inner diameter of 155mm
1204 Anodized Aluminium SF U Plate having inner diameter of 180mm
1205 Short Fast FX Strut stretching from 116mm to 152mm
1206 Medium Fast FX Strut stretching from 143mm to 205mm
1207 Long Fast FX Strut stretching from 195mm to 311mm
1208 Standard Extra Extra Short Strut stretching from 59mm to 76mm
1209 Extra Short Fast FX strut stretching from 91mm to 121mm
1210 half pin having diameter of 4.5mm with length of 150mm and 20mm HA coated
1211 half pin having diameter of 4.5mm with length of 150mm and 30mm HA coated
1212 half pin having diameter of 4.5mm with length of 150mm and 40mm HA coated
1213 half pin having diameter of 6.0mm with length of 150mm and 20mm HA coated
1214 half pin having diameter of 6.0mm with length of 200mm and 25mm HA coated
1215 half pin having diameter of 6.0mm with length of 200mm and 30mm HA coated
1216 half pin having diameter of 6.0mm with length of 200mm and 35mm HA coated
1217 half pin having diameter of 6.0mm with length of 200mm and 40mm HA coated
1218 half pin having diameter of 6.0mm with length of 200mm and 45mm HA coated
1219 half pin having diameter of 6.0mm with length of 200mm and 50mm HA coated
1220 half pin having diameter of 6.0mm with length of 200mm and 55mm HA coated
1221 half pin having diameter of 6.0mm with length of 200mm and 60mm HA coated
1222 half pin having diameter of 6.0mm with length of 200mm and 65mm HA coated
1223 half pin having diameter of 6.0mm with length of 200mm and 70mm HA coated
1224 fixation bolt for 6mm half pin
1225
bar to bar connecting freedom clamp made up of part aluminium and titanium
with stainless steel tightening bolts
1226
bar to pin connecting freedom clamp made up of part aluminium and titanium
with stainless steel tightening bolts
1227 The system shoul have thirty degree angled post
1228 bar with diameter 10.5mm and length measuring upto 100mm
1229 bar with diameter 10.5mm and length measuring upto 150mm
1230 bar with diameter 10.5mm and length measuring upto 200mm
1231 bar with diameter 10.5mm and length measuring upto 250mm
1232 bar with diameter 10.5mm and length measuring upto 300mm
1233 bar with diameter 10.5mm and length measuring upto 350mm
1234 bar with diameter 10.5mm and length measuring upto 400mm
1235
titanium nitride short half pins with thread diameter 5mm, shank diameter
5mm, thread length 30mm and shank length 110mm
1236
titanium nitride long half pins with thread diameter 5mm, shank diameter 5mm,
thread length 30mm and shank length 160mm
1237
titanium nitride short half pins with thread diameter 5mm, shank diameter
5mm, thread length 35mm and shank length 110mm
1238
titanium nitride long half pins with thread diameter 5mm, shank diameter 5mm,
thread length 35mm and shank length 160mm
1239
titanium nitride short half pins with thread diameter 5mm, shank diameter
5mm, thread length 40mm and shank length 110mm
1240
titanium nitride long half pins with thread diameter 5mm, shank diameter 5mm,
thread length 40mm and shank length 160mm
1241
titanium nitride short half pins with thread diameter 5mm, shank diameter
5mm, thread length 45mm and shank length 110mm
1242
titanium nitride long half pins with thread diameter 5mm, shank diameter 5mm,
thread length 45mm and shank length 160mm
I specification for
interlocking nail
For Interlocking Nail: ( especially in special implants category) Instrumentation
should be simple so that operatiion time is less ( beneficial for the patient).
Guide wire – ball tipped designed in such a way that it can be removed even after
nail is inserted. Should supply all the necessary instruments necessary for the
conduction of the surgery.
US FDA approval
Preferable to have to have distal targeting device for c arm less insertion of distal
locking screws ( it will reduce the radiation exposure to the patient )
II specification for
periarticular and
periprosthetic
fracture implants
For Special implants to be used In fractures in periarticular region and in
osteoporotic bones ( All are MRI compatible implants and USFDA
APPROVAL)
Anatomically contoured in such a way that it fits best the bone.
It should not irritate the soft tissue
It should facilitate easy closure of the skin after surgery
US FDA approval
Preferred if the Locking compression screw - inserted into the plate is
cannulated.