E Body Kit - mustangdepot.com · Fiberglass body parts do not fit the same as stamped steel parts....

E Body Kit - DISCLAIMER - The word "Eleanor" has two registered trademarks, one owned by Carroll Shelby in the automotive classification, and the other by Denice Halicki in video

games and toys. "Gone in 60 Seconds" is a registered trademark of Denice Halicki. GT-350, GT-500 and GT-500E are also registered trademarks of Carroll Shelby. Mustang Depot has no affiliation with either Carroll Shelby, Denice Halicki or Ford Motor Company. The terms "Eleanor" and "Mustang" when used, are used for descriptive purposes only and are not meant to imply any affiliation with their mark holders. Mustang Depot was one of the original distributors of the Eleanor Body Kit offered by Cinema Vehicle

Services. We have since continued without interruption with the sales of these kits, and the use of the word "Eleanor" prior to both Carroll Shelby and Denice Halicki registering their marks. Mustang Depot is not involved in the manufacturing of these body kits, or the manufacturing of replica cars. The styling of the Eleanor Mustang from the motion picture Gone in 60 Seconds is based on a 1967 Shelby Mustang with some slight modifications. So the styling is considered public domain and is not patented. The body kit

offered on this page is sold as an E Body Kit, not an Eleanor Body Kit out of respect for the mark holders.

These kits are manufactured by FSI. This is a direct knock-off of the original kit with

absolutely no differences in look what so ever. You can rest assured of an exact and accurate high quality replica.

These body components are being sold either as complete kits, or purchase the parts individually. Will fit 1967-1968 Fastbacks, Coupes or Convertibles (upper side scoops for Fastbacks only)

The 1965-66 E2 Body Kits Now Available Made to order, please allow approx 2 weeks. Prices do not include shipping or packaging charges. List of Parts Included in Kit Below: front lower valance, upper nose section, hood, front fender flares, rear fender flares, side exhaust skirts, upper side scoops (fastbacks only), lower side scoops, tail lamp panel with molded in light buckets and spoiler trunk w/end caps. Options include four different hoods.

Part # Description Price FS-M-7001FB 1967-68 FSI E Body Kit - Fastback $3750.00/kitFS-M-7001CP 1967-68 FSI E Body Kit - Coupe/Convertible $3530.00/kit

Call 702-262-0011 Call 702-262-0011 Direct 702-262-0011 Fax 702-262-0099 M-F 9a-5p PST or visit our website 24/7 www.MustangDepot.com

Copyright 2007 Mustang Depot All Right Reserved. Prices are subject to change without notice. Version 1i 10/22/2008

1

http://www.mustangdepot.com/OnLineCatalog/Fiberglass/e2.htm

Fiberglass body parts do not fit the same as stamped steel parts. While they can be finished to show quality, fiberglass body parts are built closer to race car standards than show car standards. Although fiberglass parts are easy to work with, they can require substantial work to conform to the varying early unibody

Mustangs. This means every car is slightly different. We have come to this conclusion after many years of installing and selling fiberglass body parts from many different manufacturers. Within 30 days of receipt, you must check fit before sanding or painting your new fiberglass pieces. If fiberglass parts have been sanded or painted they can no longer be sold as new for either race or show purposes. For this reason, the manufacturer will not warranty such parts and cannot be accepted

for a return. Our policy for returning fiberglass parts is limited to the purchase price of the unit on Exchange. A 20% restocking fee is applicable for the monetary return of funds. In the event you feel the product is defective, our policy requires that you send the product back to us fully insured, heavily packaged to avoid

damages and freight prepaid. A full investigation by Mustang Depot and the manufacturer will ensue. This includes fitting the item on the respective car, matching the part to the mold, and matching it with other items produced from the same mold. If it is determined that the product is not defective and is in reasonable

constraints for finishing, the product will be returned at the customers expense. If it is deemed that the product is defective, a replacement will be sent at no cost, and .the return freight charges incurred by the customer will be refunded in the form of an in-store credit. All product that leaves Mustang Depot is inspected and

confirmed to be in good condition, heavily packaged, and is insured for the value of the product. Noted on the package are clear neon stickers warning you to inspect the product in the presence of the carrier/driver. In the event damages occur, have the driver notate the damage. If the package was left at your door, you

must notify the carrier immediately and file a damage claim. Do not return the product to Mustang Depot it is our policy to refuse returns without a Return Authorization number. Retain all the packaging so the carrier can inspect the product. In most cases, small repairs can be made at a reasonable cost. Get an

estimate, and submit the claim. Full loss claims are scrutinized much heavier. Please note: For fiberglass hoods, removal of stock hood springs and use of a prop rod and hood pins are highly recommended. for trunks, removal of springs or tension rods is highly suggested. Fiberglass has about a 6-8 week cure time when it

comes out of the molds. So it's important to remove the parts from it's packaging immediately. Do not place anything on top of the part during storage. The part will attempt to take the shape of whatever it's stored on top of as well. Especially in warmer climates. The best place to store the part is on the car in it's intended

position. The word Mustang and the word Shelby are used on our site for descriptive purposes only and are not meant to imply any affiliation with either Ford Motor Company or Shelby American. Click here for our Return Policy

E Body Components Individual Parts Pricing

• If you purchase the upper nose section, it will not work with your stock hood

• The headlight buckets will need to be purchased if using the upper nose, as well

• This is the same concept/dimensions as putting a S Nose on your car

Prices do not include shipping charges. Please allow approx 2 weeks delivery All orders are prepaid and are special order (ie your credit card will be charged in advance)

Part # Description Price

FS-M-7001US FSI E Upper Nose Section $469.00/eaMR-ELN-LN1 FSI E Lower Nose Section Doesn't require Fender Flares *These do

not have the light recesses in the middle* $489.00/ea

FS-M-7001LN FSI E Lower Nose Section Requires Fender Flares $469.00/eaFS-M-7001LRH FSI E Low Rise (Orig. Style) Hood -for use with E or S long noses

only $575.00/ea

FS-M-7001HRH FSI E High Rise Hood -for use with E or S long noses only $610.00/eaFS-M-7001USC FSI E Upper Scoops $300.00/prFS-M-7001LSC FSI E Lower Scoops $300.00/prFS-M-7001SS FSI E Side Exhaust Skirts $420.00/setFS-M-7001FF FSI E Front Fender Flare Set Specify mold or bolt in $350.00/prFS-M-7001RF FSI E Rear Fender Flare Set Specify mold or bolt in $350.00/prFS-ELN-HLB FSI E Headlight Light Bucket Set w/Brackets not included in kits

above but required for installation $199.00/pr

FS-678TKA FSI E Spoiler Trunk - Fastback $449.95/eaFS-678TKB FSI E Spoiler Trunk - Coupe $469.95/eaFS-M-7001TLP 1967 FSI E Tail Light Panel Molded Light Buckets

(Does not have hole for Gas Cap) $245.00/ea

FS-M-7001RV FSI E Rear Valance (w/ molded holes for back-up lights) $180.00/ea

FS-M112

1967-68 4pc Ground Effects Kit (includes 2ea side skirts, and 2ea rear corners) Rear corners must be trimmed when using flares. Can be supplemented for side exhaust in the kits above.

$329.95/kit



2

http://www.mustangdepot.com/Media/returns.htm

http://www.mustangdepot.com/OnLineCatalog/images/Fiberglass/MR-ELN-UN.gif

E Paint Codes Body - Pepper Grey Metallic - Dupont Fleet 44490 Stripes - Black Metallic - Dupont Fleet 44435

1967 Tail Lamp Kit

Mustang Depot has done all the work for you on this convenient new kit.

Each Kit Includes:

Pair of New FoMoCo Lenses Six Each New Aftermarket Bulb Socket/Pigtail Combinations Pair of New Lens Gaskets Pair of New 1967 S Tail Lamp Bezels/Frames Mounting hardware is included...

Part # Description Price 67-STLK-2 1967 S Tail Lamp Kit with new lenses $299.00/kit



3

GT40 /ACIII Rims

We are not responsible for offset/backspacing. Make sure to check clearances prior to ordering! For Custom Backspacing, please allow 4-6 weeks for delivery. Spinners are Included but lug nuts are separate! Please specify custom backspacing required requirements in the "COMMENTS" section of the checkout order form or call. When selecting custom backspacing, these are "custom" made Special Order wheels and cannot be returned for any reason.

PART # SIZE FINISH PATTERN Price

AR-427-8165 18x10 427 Series Polished Rim/Painted Center 5-4.5 $399.95/ea




AR-427-7965 17x9.5 427 Series Polished Rim/Painted Center 5-4.5 $384.95/ea


AR-427-7866-45 17x8 4.5” BS 427 Series Polished Rim/Painted Center 5-4.5 $369.95/ea

AR-842042 1/2" Chrome Acorn Lug Nut Set/20 $19.95/set

PART # SIZE FINISH PATTERN Price

AR-427P-8165 18x10 427P Series Polished Rim/Polished Center 5-4.5 $469.95/ea




AR-427P-7965 17x9.5 427P Series Polished Rim/Polished Center 5-4.5 $439.95/ea


AR-842042 1/2" Chrome Acorn Lug Nut Set/20 $19.95/set



4

Bullet Mirrors Show car quality mirrors, made in America. Exact copy of Rotunda mirror offered years ago. Includes two styles of pads (Mustang and Cobra versions), mounting hardware and positioning templates...


C5RZ-17696-A 1965-67 Bullet Mirrors $117.95/ea

VPS-LK5

1967-68 "E" Front Light Kit w/5.75" Headlights Includes: 1 set of WA-7402-C 5.75" Tri-Bar Headlights clear bulbs, 1 set VPS-PL2088B projector beams for next to headlights, 1 set VPS-PL2020C small lights in lower apron, 1 set VPS-NS2160DK 6.5" Lower Center Driving Lights. Note: For cars with the rear valance option, add one more set of VPS-PL2020C 's below. NO SUBSTITUTIONS

$344.95/kit

JV-ELN-LFB

1967-68 E Front Lower Brace Kit Does not work with Stage 1 Lower Noses This item helps to support the lower nose and the lower center fog lights.

$179.00/ea

D1ZZ-9030-C Mach I Pop Open Gas Cap (Used on the movie car) $139.95/ea

CSX-9030-A

AC COBRA ROADSTER GAS CAP: 31/2", roller latch LeMans fuel filler cap. Polish finish (Also used on the E Body Kits/Conversions) New High Quality Reproduction (above on the right)

$149.95/ea



5

http://www.mustangdepot.com/OnLineCatalog/images/Electrical/c5zz-13007-lbb1.jpg

http://www.mustangdepot.com/OnLineCatalog/images/Electrical/pl-2088b.jpg

http://www.mustangdepot.com/OnLineCatalog/images/Electrical/pl2020c.jpg

http://www.mustangdepot.com/OnLineCatalog/images/Electrical/NS-2160.jpg

http://www.mustangdepot.com/OnLineCatalog/images/Electrical/pl2020c.jpg

423411B

1965-68 Mustang Fastback Side Filler Kit Great for E and E2 Fastbacks wanting the side filler gas cap/inlet (slight shortening may be required for 1965-66 model cars depending on cap placement)

$219.95/kit

S7MS-8200-E 1967-68 E Front Grill Set Upper and Lower Billet Grill for E Nose Only

This item is sold separately, or one of our inclusive kits below. $359.95/set


ML-MK3-Kit 1964-73 Steering Wheel Kit- Real Mahogany Rim! (Polished Adaptor Kit, Horn Kit and Horse Emblem Included) $359.95/kit

ML-MK4-Kit 1964-73 Steering Wheel Kit- Real Black Leather Rim! (Polished Adaptor Kit, Horn Kit and Horse Emblem Included) $359.95/kit

Whether you’re working on Steel, SMC, FRP, fiberglass, rigid plastic, semi-rigid plastic, flexible plastic or panel bonding, Norton SpeedGrip Urethane Structural Adhesive gets the job done. This product will help to reduce the potential for cracking when bonding fiberglass to metal. While retaining flexibility after curing, it can be sanded and painted. Yes you can use it as the filler instead of bondo. Ideal for bonding on the flares, skirts, and side scoops on our E & E2 Body Kits. Can also be used in place of 2 way adhesive tapes commonly used on late model side scoops and skirts. Part # Description Price 636425-04616 Speed Grip 5 Minute Set Time (2ea tips included) $39.95/ea 636425-04617 Speed Grip 15 Minute Set Time (2ea tips included) $39.95/ea 636425-04627 Speed Grip Self Mixing Tips $7.95/ea 636425-41400 Speed Grip Heavy Duty Manual Applicator Gun $69.95/ea



6

Ultra Interior Kit

Each kit includes the following

TMI Front and Rear Seat Upholstery A Pair of Arm Rest Pads

TMI Padded Sun Visors A Pair of Chrome Arm Rests Bases (1965-66 Only)

TMI Door Panels A Moonskin Headliner (Coupe/Fastback Only)

Auto Custom Carpet 80/20 Carpet Front & Rear Windshield Seals (Coupe/Fastback Only)

16 Feet of Windlace (8 Feet in Convertible Kits)

Quarter Trim Upholstery (Convertible Only)

Dash Pads from Dashes Direct are optional below. For the 1965-66 cars, we supply reproduction dash pads.

Two tone colors are available in; Lt Blue/Blue, Red/White & Blue/White

Certain colors are not available. These colors include; Ivy Gold, Parchment & Palomino.


MD-INT1 1967-68 Coupe Standard Interior Kit Please specify Year, Door Panel/Arm Rest Color, Upholstery Color and Carpet Color $499.95/kit

MD-INT1DP 1967-68 Coupe Standard Interior Kit with Dash Pad Please specify Year, Door Panel/Arm Rest Color, Upholstery Color, Carpet Color and Dash Pad Color

$684.95/kit

MD-INT2 1967-68 Fastback Standard Interior Kit Please specify Year, Door Panel/Arm Rest Color, Upholstery Color and Carpet Color $499.95/kit

MD-INT2DP 1967-68 Fastback Standard Interior Kit with Dash Pad Please specify Year, Door Panel/Arm Rest Color, Upholstery Color, Carpet Color and Dash Pad Color

$684.95/kit

MD-INT4 1967-68 Convertible Standard Interior Kit Please specify Year, Door Panel/Arm Rest Color, Upholstery Color and Carpet Color $459.95/kit

MD-INT4DP 1967-68 Convertible Standard Interior Kit with Dash Pad Please specify Year, Door Panel/Arm Rest Color, Upholstery Color, Carpet Color and Dash Pad Color Carpet Color = $644.95/kit



7

Ultra Suspension Kit

Picture shown with optional rear sway bar and KYB shocks. Build your suspension kit with the BEST and most current suspension components available on the market today! The Ultra Suspension Kit includes everything to take your stock suspension to the next level. The "upgrades" we offer will build upon the suspension and chassis with the latest technology and bring your car to a competitive weekender, or even a full race set-up. This kit has everything you need to completely change out your front and rear suspension. Each Kit Includes:

• Front Coil Springs (1" Lowering on Perf. Springs) • Performance 4 Leaf Standard Eye Leafs • 1" Front Sway Bar Kit • KYB Front and Rear Shock Absorbers • 3 Options for Coil Springs Insulators • Polyurethane Sway Bar End Link Kits • Polyurethane Sway Bar Frame Bushing Kits • New Leaf Springs Shackles w/Rubber Bushings • Upper Control Arm Set (Made in the USA) • Lower Control Arm Set (Made in the USA) • Either Rubber or Poly Urethane Strut Rod Bushings • Spring Perches

Upgrades Available:

• Bilstein Street Shocks $350 • Classic 4.5 Leaf Mid Eye 1" drop Leafs = $30.00 • Classic 5 Leaf Standard Eye Leafs = $50.00 • Classic 5 Leaf Mid 1" drop or Rev Eye 2"drop = $50.00 • Maier Racing 165 Race or 200 Race = $160.00 • Racing Shackles $35.00 • 700# Perf. Big Block Coils "no drop" $45 • 3/4" Non Adj. Rear Sway Bar Kit $95.00 • Maier Racing 5/8" Adjustable Rear Sway Bar $229 • Maier Racing Adjustable Pan Hard Bar for $359 • Pan Hard Bar and Adj Rear Sway Bar for $588 • Roller Perches for $170.00 • TCP Strut Rods $469 • 1 1/8 Inch Front Sway Bar $10

The stock ride height in the front can be accomplished by using the 1" "Insulator Option" below. Ride heights are referring to the stock, right off the assembly line heights. Most cars have sagged over the years so actual height lowering may vary from these numbers. Please Call on ALL Big Block Cars! Please specify year, model, engine size, leaf springs preferred, size of insulators preferred, and either standard or upgraded shackles. Part # Description Price

SS-US1Stg1 1964-70 Ultra Performance Suspension Rebuild Kit - Stage 1 $799.95/kit

SS-US1Stg2 1964-70 Ultra Performance Maier Combo Suspension Rebuild Kit - Stage 2 $1269.95/kit

SS-US1Stg3 1964-70 Ultra Performance TCP Combo Suspension Rebuild Kit - Stage 3 $1749.95/kit



8

http://www.mustangdepot.com/OnLineCatalog/Suspension/mr-leafs3.htm

http://www.mustangdepot.com/OnLineCatalog/Suspension/mr-leafs4.htm

http://www.mustangdepot.com/OnLineCatalog/Suspension/shackles.htm

http://www.mustangdepot.com/OnLineCatalog/Suspension/mr-sway.htm

http://www.mustangdepot.com/OnLineCatalog/Suspension/mr-phr.htm

http://www.mustangdepot.com/OnLineCatalog/Suspension/spring-perches.htm

http://www.mustangdepot.com/OnLineCatalog/Suspension/strut_rod_kit.htm

Used on the original movie car! TCP’s Coilover Conversion Kit is the definitive solution for improving the handling of your classic automobile. Using current technology, materials and racetrack proven techniques, we are able to offer a suspension package that even the most modest of drivers can benefit from. You can now enjoy the security, confidence and handling characteristics of a newer vehicle without making irreversible modifications to your classic automobile.

TCP’s Design Our use of TIG welded, tubular steel control arms and Kevlar Injection Molded Rod Ends, prevent much of this deflection. The tubular control arms resist the twisting and bending that the

stamped design is subject to. The state of the art rod ends create an extremely precise pivot point that ensures accurate travel throughout the suspensions range of motion. We have also made corrections to the original geometry of the suspension. Our design induces negative camber as the suspension loads, which keeps more of your tire's contact patch on the road. The upper ball-joint angle has also been corrected to prevent binding at the top of the travel arch. The lower mount of the shock is relocated to the strut rod plate at the lower control arm. This modification effectively transfers the weight of the vehicle closer to the pivot axis of the spindle, which eliminates the flex normally induced upon the upper control arm. Please confirm spring rate. Recommended spring rates 450 for a small block and 550 for a big block. Small block kits shown below.

Vari Shock Coilovers The QA1 shock absorber is machined from 6 stock, which

provides superior heat dissipation, maximum strength and quality appearance. Special features are esix-position compression and six-position rebound damping adjustments,an internally vented oil chamber whicprotects the top seal from excess pressure and stops leakage, nitrogegas charging for fade-free damping and consistent operation, and hydraulictopping. Bottom threaded nut quickly changes spring preload to adjust ride height.

061 T-6 billet aluminum

asy

h

n

anti-

Part # Description Starting Price

TCP-COLVF-09 1967 Coilover Spring Conversion Small Block $2485.00/kit

TCP-COLVF-10 1968-79 Coilover Spring Conversion Small Block $2485.00/kit



9

TCP Rack and Pinion

Patent Pending

The cure for poor steering... For many classic car enthusiasts, a car that isn't up to today's handling standards can sometimes taint the joy of ownership. Some owners are known to comment that they "love everything about their car, except the way it steers". Our Rack & Pinion Kit is the cure for the poor steering characteristics of your classic car.

Precision Operation... Our Rack & Pinion Kit eliminates the "play" in the steering system. By using a more direct gearing system than the factory steering box we have enabled a more efficient transfer of energy. As you turn the steering wheel the steering shaft turns the pinion gear. The pinion gear is in direct contact with the rack gear. The centerlink, which the inner tie-rods bolt to, is bolted directly into the rack gear. This simplified gearing system gives the steering a tight, direct feel that the factory steering box is incapable of.

Factory Steering... The factory steering box uses a worm and sector gearing system that is very susceptible to wear.

As the worm gear turns, the contact edges slide along the surface of the sector gear and consequently wear these surfaces down. After some use this sliding action creates slack between the gears which translates into unwanted "play" at the steering wheel. This "play" creates a delay in the control of the front wheels.

Rack & Pinion... A pinion and rack gear are less susceptible to wear. As the pinion gear turns it pushes against the rack gear

which reduces the sliding action. Reduced wear insures increased precision by maintaining a tight fit. This precision provides immediate control and feedback from the front wheels.

Quicker Ratio... A quicker ratio means fewer turns of the steering wheel while maintaining the same turning radius. Our Rack & Pinion requires only 3 turns from lock to lock. The factory steering systems were a slow responding 4 turns. A more sensitive steering system will get you pointed in the right direction in less time. You will enjoy quicker turning response and more confidence in all types of driving situations.

Highest Quality... Every component is manufactured from the highest quality materials available. Billet steel construction of the internal gears, stainless steel lines, durable rubber boots, grade 8 mounting hardware combined to give you a reliable and quality steering system. Easy Installation... This kit has been designed for the easiest possible installation. Whenever possible, factory mounting locations are used and extensive cutting is avoided. We provide detailed installation instructions with photos to make the installation as straightforward as possible. For those other than textbook installations we have free tech support available during business hours. Our rack will clear most aftermarket headers and work with small or big block engines. Improve the steering characteristics of your classic automobile! Order today! Continued on next page…



10

TCP Rack & Pinion Conversion (Please note: You must pick an installation kit below)


TCP-RCKM-FD67

1967-70 TCP Mustang Manual Rack & Pinion Conversion Please select an installation kit below! Includes Eccentric Eliminator Kit! $1329.00/kit

TCP-RCKP-FD67

1967-70 TCP Mustang Power Rack & Pinion Conversion Kit - Please select an installation kit below! Includes Eccentric Eliminator Kit! $2029.00/kit

Please pick your Manual R&P Installation Kit


M65-66-LS-SB 1965-66 Mustang Manual R&P Installation Kit - Long Shaft / Small Block N/A

M67-LS-SB 1967 Mustang Manual R&P Installation Kit - Long Shaft / Small Block N/A

M67-69-SS-SB 1967-69 Mustang Manual R&P Installation Kit - Short Shaft / Small Block N/A

M69B-70-SS-SB 1969Boss-70 Mustang Manual R&P Installation Kit - Short Shaft / Small Block N/A

M67-LS-BB 1967 Mustang Manual R&P Installation Kit - Long Shaft / Big Block N/A

M67-69-SS-BB 1967-69 Mustang Manual R&P Installation Kit - Short Shaft / Big Block N/A

M69B-70-SS-BB 1969Boss-70 Mustang Manual R&P Installation Kit - Short Shaft / Big Block N/A

MF60-65-LS-SB 1960-65 Falcon Manual R&P Installation Kit - Short Shaft / Small Block N/A

Please pick your Power R&P Installation Kit

P65-66-LS-SB 1965-66 Mustang Power R&P Installation Kit - Long Shaft / Small Block N/A

P67-LS-SB 1967 Mustang Power R&P Installation Kit - Long Shaft / Small Block N/A

P67-69-SS-SB 1967-69 Mustang Power R&P Installation Kit - Short Shaft / Small Block N/A

P69B-70-SS-SB 1969Boss-70 Mustang Power R&P Installation Kit - Short Shaft / Small Block N/A

P67-LS-BB 1967 Mustang Power R&P Installation Kit - Long Shaft / Big Block N/A

P67-69-SS-BB 1967-69 Mustang Power R&P Installation Kit - Short Shaft / Big Block N/A

P69B-70-SS-BB 1969Boss-70 Mustang Power R&P Installation Kit - Short Shaft / Big Block N/A



11

TCP Subframe Connectors Fits: 1964 1/2 - 1970 Mustang and Cougar Coupe, Fastback & Conv.


TCP-DSL-01

1964-70 Drive Shaft Safety Loop $89.00/set

TCP-SUBFC-01

1964-70 Coupes/Fastbacks Subframe Connectors Kit 1 (outside section / weld-in) $169.00/set

TCP-SUBCS-01

1964-70 Coupes/Fastbacks Subframe Connectors Kit 2 (center section / bolt-in) $195.00/ea

TCP-SUBFC-02

1964-70 Convertible Subframe Connectors Kit 1C (outside / weld-in) $185.00/set

TCP-SUBCS-03

1964-70 Convertible Subframe Connectors Kit 2C $205.00/ea

TCP-PKG-SFC-01

1964-70 Coupes/Fastbacks Subframe Connectors Complete Package Kit (Includes driveshaft safety loop)

$449.00/ea

TCP-PKG-SFC-02

1964-70 Convertibles Subframe Connectors Complete Package Kit $385.00/ea

Shock Tower Braces

During cornering your car's chassis has a tendency to flex a great deal, allowing unwanted changes in its overall handling performance. Our Shock Tower Brace is designed to help eliminate unwanted flex, keeping your car's chassis properly aligned. By stiffening the shock towers to the firewall and shock tower to shock tower, you vehicle stays tight and goes where you point it. Left & Right Rod Ends offer complete adjustability to help you dial-in desired handling characteristics. Part # Description Price

TCP-TWRB-01 1964-70 Mustang Tower Brace Kit 1 (Export Brace Portion) $160.00/kit

TCP-TWRB-02 1964-70 Mustang Tower Brace Kit 2 (Monte Carlo Bar Portion) $120.00/kit

TCP-TWRB-03 1964-70 Mustang Tower Brace Kit 3 (Tie’s in Kit #1 to Kit #2) $115.00/kit

TCP-TWRB-123 Mustang Tower Brace Kit Set 1,2 & 3 $395.00/kit



12

Our Rear Coilover System is the most technologically advanced rear suspension system available for vintage Mustangs. We have put together elements from various racing series in a package that fits neatly into your vehicle with only minor modifications to the existing chassis. Quick access for maintenance was also taken into account during the design process. The entire rearend system can be removed from the vehicle in a matter of minutes. If you want razor sharp handling for your Mustang then this is the system for you.

The positioning of the shocks is the most eye-catching feature of the system. Pushrods are used to actuate the shocks. Removing the shocks from the axle housing greatly reduces the amount of unsprung weight and allows the shocks to work more efficiently. Placing the shocks below the axle lowers the center of gravity to improve handling. click here for the complete data sheet and Expanded Application Guide


TCP-RCOV65-55 1965-66 TCP Rear Coilover Conversion Truck Freight Collect $4889.00/kit

TCP-RCOV67-70 1967-70 TCP Rear Coilover Conversion Truck Freight Collect $4889.00/kit


A111-28 SSBC Force 10 Rear Disc Conversion for Fab9 Housing Internal parking brake, Force 10 SuperTwin aluminum caliper. 11.25" Slotted/Plated Rotor. Click on part number for more details

$1394.00/kit

CE-67Axl31TF 1967-70 Currie Forged Axle Kit 31 Spline Torino Flange for 53.75" Housing Kit includes two axles, assembled and complete with studs, bearings and seals ready to install.

$449.95/kit

Side Exhaust Kits



13

http://www.mustangdepot.com/graphics/RPSS-FD_DS_WEB.pdf

http://www.mustangdepot.com/OnLineCatalog/Suspension/TCP/app-chart.htm

http://www.mustangdepot.com/OnLineCatalog/Suspension/TCP/app-chart.htm

Fig. A

Fig. C

Fig. D

• The Dr Gas side exhaust kits are designed to run with your 65-04 Mustang making 12 more horsepower than Walker Race Bullets and noticeably quieter. The Dr Gas kit uses Spintech mufflers with mandrel bent tubing.. The tubing is flattened to go under subframe connectors (see Fig. A). The size of the Dr Gas tip is dim 5.5" x 2" (See Fig. B). Options include tube sizes 2.5" and 3", addition of X-Pipe technology with long or short tube headers...

• The new Side Exhaust with Cast Aluminum E Tips is uniformly contoured to the exhaust hole on the side skirt (See Figure C) This is the same kit as above using the E tip. These work with both the 1967-68 E Body Kit and the 1965-66 E2 Body Kit. The cast has flattened contour to go under subframe connectors and pre-tapped holes for securing the tip with hangers. (See Figure D). Please Note: If you are using TCP-SFKit2, it is very close to the center section and you will have to fabricate new exit tubes between the mufflers and tips. On all cars, it's expected that some modification will be necessary to the Dr Gas exit tube that comes out of the muffler to meet the tip, as these tips were not specifically designed for the Dr Gas Exhaust Kit. The rocker area will need to be modified for the exhaust tip to exit comfortably. You would cut the outer rocker slightly larger than the hole opening and weld in fillers so the inner rocker is not exposed. It's a good idea to trim the pinch weld where the tip would run underneath. The hole opening is the same between the Maier E Kit skirts and the E2's skirts. Convertibles require a special pipe so please call prior to ordering.


S7MS-5255-E E Tip Set 2.5" Inlet Cast Aluminum - Polished Tip Openning $309.95/set

PMS-SX6100-SPEC1 1965-04 Side Exhaust Kit 2.5" Tubing w/E Tips from behind the X pipe pictured above and back $769.95/set

PMS-SX6100-SPEC2 1965-04 Side Exhaust Kit 2.5" Tubing w/X-Pipe & E Tips for Shorty Headers (pictured above) $1049.95/set

PMS-SX6100-SPEC3 1965-04 Side Exhaust Kit 2.5" Tubing w/X-Pipe & E Tips for Long Tube Headers $1069.95/set

PMS-SXD6130-SPEC1 1965-04 Side Exhaust Kit 3" Tubing w/E Tips from behind the X pipe pictured above and back $899.95/set

PMS-SXD6130-SPEC2 1965-04 Side Exhaust Kit 3" Tubing w/X-Pipe & E Tips for Long Tube Headers $1094.95/set

All JBA Headers come standard with 14 gauge steel nickel/chrome finish, hardware gaskets, instructions and a limited lifetime manufacturers warranty…

JBA-1650 Add JBA Headers 289, 302 $499.95/set JBA-1653 Add JBA Headers 351W $599.95/set



14

Customer Cars

”



15Mustang Depot Order Sheet

___________________________________________________________________ Ship To Address: (Cannot be a PO Box) First & Last Name : Street Address : City, State & Zip : Day Time Telephone # : Email Address : ____________________________________________________________________ Billing Address: (Required! Must match billing address on credit card) Name : Address : City, State & Zip : ____________________________________________________________________ Method of Pre-Payment: (No COD's) Card Type : Card Number : Expiration Date : ____________________________________________________________________ Year, Make & Model:(Please enter all info relative to your order) Part Number Description Qty Price

TOTAL

___________________________________________________________________ I hereby authorize Mustang Depot to charge my credit card account for the parts listed above and including shipping & handling fees incurred in the transportation of the merchandise requested above. Returns within 30 days only, are subject to a 20% restocking fee. Shipping charges figured at 8% (.08) of the total sale and are non-refundable. Prices are subject to change without notice. Call for pricing and availability. Please include a copy of your driver’s license… Signature X______________________________ Print Name Here__________________________ Date ___________________

Mustang Depot 2510 E Sunset Rd #7 Las Vegas, NV 89120

Terms and Conditions Mustang Depot is not affiliated with Ford Motor Company. Mustang Depot reserves the right to refuse or cancel any order at any time!



16



17

Your access to and use of the Mustang Depot, including any purchase made using our web site is exclusively governed by these terms and conditions and any others contained on this web site (collectively, "Terms and Conditions"), as may be supplemented by applicable law. By accessing, using or purchasing products from Mustang Depot, you agree to be bound by the Terms and Conditions. The Terms and Conditions may be changed at any time without prior notice. We will make changes by modifying our web sites. Your continued access to or use of the modified web sites conclusively demonstrates your acceptance of those changes prospectively. No other provisions or changes are binding upon us unless reduced to writing and signed by an authorized Mustang Depot representative. If any provision of the Terms and Conditions or any application thereof is held to be invalid or unenforceable for any reason, that provision shall be deemed sever able and the remainder of the Terms and Conditions and the application of that provision in other situations shall not be affected. All pictures herein are for representation purposes only. Although we do our best to provide as clear and accurate pictures as possible, the picture may be of a product similar to the actual one (ie different year, etc) Some of the products we sell are for racing and off-road vehicle only, lighting products are solely as auxiliary lighting. Please check with your local DMV or vehicle department for regulations and information. Mustang Depot is not responsible for any legal issues regarding any of the products purchased from this site. For your own concern, please make sure of your orders and the legality of the product before making any purchases. We reserve the right, without liability or prior notice, to revise, discontinue, or cease to make available any or all products or to refuse or cancel any order.

Shipping Terms Mustang Depot will process all orders received the day after the order is received. We do not guarantee stock. If the item is currently available, the product will ship the day following the order date, with respect to the type of delivery service requested by the customer. (For example; If you order something on Monday selecting the Next Day Air Option, if the product is available, your order will be processed and shipped on Tuesday and you should receive it by Wednesday) This does not include weekends and holidays. We are not liable for shipping charges, for items that are not currently in stock. We will ship the item the manner in which it was ordered (i.e. Next Day, 2nd Day) whenever the product is or becomes available... There are no refunds given for shipping charges! We will do our best to fill orders that we don't have currently in stock. We have a network of affiliates, which allows us the ability to pursue the product from other sources. However, it is not too uncommon for nationwide backorders to be in effect due to manufacturer hold-ups on certain items. The term used herein as "Free Shipping" only applies to "Ship To" addresses within the continental USA only. When a product is deemed "Free Shipping," other shipping options including 3 Day, 2nd or Next Day Air, will have to be paid separately. On large items deemed "Truck Freight Collect" the bill for freight will be due upon arrival of the parts. Shipping charges are, in all cases, the complete responsibility of the customer and Mustang Depot will not be liable in any case for shipping charges incurred by the customer. This includes both from the origin to the customer and from the customer to the origin. We do not currently accept international orders...

Other Policies Special Order Items - Some items listed in this catalog are made to order by the manufacturer. These Special Order items require pre-payment by debit card, credit card, or wire transfer and are not returnable. Back Orders - Items temporarily out of stock will be placed on back-order unless you indicate that a refund should be made. All shipping charges on regular domestic orders are charged on the initial order, so back orders are shipped at no additional charge. Back ordered items usually are shipped within 30 days, however, availability can change and Mustang Depot reserves the right to cancel any back order and issue a refund. Refused Shipments - The customer is responsible for freight both ways on any shipment for which delivery is refused Sale Items - At no time are refunds given on items that may go on sale after purchase.

Warranty Disclaimer; Limitation of Liability Mustang Depot expressly disclaims, and the purchaser expressly assumes, responsibility for any incidental or consequential damages arising from any and all product failure, sold through Mustang Depot. Defective product liability is limited to the replacement/purchase price of the product and is provided by the manufacturer of the goods.. Any provision voided by state or other applicable law shall not act to enlarge other provisions of this warranty except as expressly required by law. Mustang Depot products are provided "AS IS." We do not make any representations or warranties, whether express or implied, regarding or relating to Mustang Depot or any associated hardware or software, including the content or operations of either. TO THE FULLEST EXTENT PERMITTED BY LAW, MUSTANG DEPOT DISCLAIMS ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MUSTANG DEPOT OR ANY OF ITS EMPLOYEES, DIRECTORS, OFFICERS, AGENTS, VENDORS OR SUPPLIERS (collectively, the "Mustang Depot parties") BE LIABLE FOR ANY DIRECT OR INDIRECT LOSSES OR DAMAGES ARISING FROM OR RELATED TO ANY PRODUCTS, SERVICES OR SOFTWARE PROVIDED HEREIN. This limitation of liability applies to all losses and damages of any kind whatsoever (whether general, special, consequential, incidental, punitive, exemplary, or otherwise, including loss of income, profits, or data), whether arising in contract, negligence or other tort theory, even if we have been advised of or should have known of the possibility of such losses or damages. The preceding Warranty Disclaimer and/or Limitation of Liability shall survive the failure of any exclusive remedy, but they may be prohibited or restricted by applicable law so they may not apply to you. YOU AGREE TO INDEMNIFY, DEFEND AND HOLD HARMLESS THE MUSTANG DEPOT PARTIES FROM AND AGAINST ANY AND ALL THIRD PARTY CLAIMS, DEMANDS, LIABILITIES, COSTS OR EXPENSES, INCLUDING REASONABLE ATTORNEYS' FEES, ARISING FROM OR RELATED TO ANY BREACH BY YOU OF ANY OF THE TERMS AND CONDITIONS OR APPLICABLE LAW, INCLUDING THOSE REGARDING INTELLECTUAL PROPERTY. All products herein are reproductions and not affiliated directly with either Ford or Shelby American unless noted. All Ford brand products are licensed by Ford through the respective manufacturer. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders. Information and prices are subject to change without notice.

Privacy Statement We consider the personal information you choose to share with us to be confidential. We do not share any personal or identifying information you submit directly or through our web sites with any unaffiliated third party, unless it is necessary to respond to your inquiry or required by law. We train our associates to respect and protect our customers' privacy. We limit our associates' access to information about you, and stress the importance of your privacy with our associates. If you just view our web sites, we do not collect any personal or identifying information about you. We do monitor the number of visits to our web sites, but only in the aggregate. This information is important for us to provide the best possible service to you.

Return Policy Within 30 days of your purchase, items can be returned to Mustang Depot via UPS for a refund. There is a 20% restocking fee imposed on all goods returned for a refund! In-Store Credits can be issued in the full amount of the product, less shipping charges! Shipping charges are always non-refundable! Either way, it's necessary to obtain a Return Goods Authorization (RGA) number from Mustang Depot. Obtaining an RGA number ensures that the return process is handled efficiently and that credits are issued in a timely manner. Within 30 days of receipt of items purchased from Mustang Depot customers may choose to return:

• Any new item in original packaging and original/unused condition • If you install the item(s), it will be deemed un-returnable. • Any used Core, as long as it is shipped in the box that contained the new product • Any item received in a damaged or defective condition • Any item received in a damaged or defective condition. • Any item received in error.

Goods Not Accepted for a Return • If you purchase a product and find it doesn't fit due to any modification to the car from stock (ie. Engine Swap, Transmission Swap) • No return on electrical parts, books, special order items, or items we disclaim in advance...

Obtaining a Return Goods Authorization Number When you plan to return items via UPS to Mustang Depot, it's necessary to obtain a Return Goods Authorization (RGA) number. RGA numbers help us process returns quickly and efficiently. Please Call (702) 262-0011 or email [email protected] for your RGA number request. Please include the reason for the return, date the order was placed, your order number, name, phone number, and shipping address. Returning Items to MustangDepot.com Simply take your package to any location that has regularly scheduled UPS pick-ups. You may want to check with your place of employment to see if they have regular UPS pick-ups. Or, you can call 1-800-PICK-UPS (1-800-742-5877) or visit the UPS Web site at www.ups.com/using/services/locate/locate.html. As long as your return address label is attached and the RGA number is included, it will insure the prompt and efficient handling of your return. Please note: you must insure the item with the carrier for the total amount of the sale! Credit and Return Shipping Costs Within 15 business days of receipt of your returned item, you will be issued credit for the original purchase price, plus applicable sales taxes, and less applicable re-stocking charges. Core credits will also be processed within 15 business days. If the reason for your return was caused by Mustang Depot, or one of our business partners (i.e., damaged or defective items, wrong part shipped), we will cover the freight charges on the replacement items. All other returns (i.e., didn't want, doesn't like) will be limited to the invoiced price less a 20% restocking fee, and less the shipping charges. In-store credits can be issued for the full purchase price of the goods, less shipping charges.

Thank you for choosing Mustang Depot

mailto:[email protected]

http://www.ups.com/using/services/locate/locate.html

E Body Kit - mustangdepot.com · Fiberglass body parts do not fit the same as stamped steel parts....

Documents

Transcript of E Body Kit - mustangdepot.com · Fiberglass body parts do not fit the same as stamped steel parts....